xref: /openbmc/linux/drivers/net/ethernet/Kconfig (revision e290ed81) 
1#
2# Ethernet LAN device configuration
3#
4
5menuconfig ETHERNET
6	bool "Ethernet driver support"
7	depends on NET
8	default y
9	---help---
10	  This section contains all the Ethernet device drivers.
11
12if ETHERNET
13
14config MDIO
15	tristate
16
17config SUNGEM_PHY
18	tristate
19
20source "drivers/net/ethernet/3com/Kconfig"
21source "drivers/net/ethernet/adaptec/Kconfig"
22source "drivers/net/ethernet/aeroflex/Kconfig"
23source "drivers/net/ethernet/alteon/Kconfig"
24source "drivers/net/ethernet/amd/Kconfig"
25source "drivers/net/ethernet/apple/Kconfig"
26source "drivers/net/ethernet/atheros/Kconfig"
27source "drivers/net/ethernet/cadence/Kconfig"
28source "drivers/net/ethernet/adi/Kconfig"
29source "drivers/net/ethernet/broadcom/Kconfig"
30source "drivers/net/ethernet/brocade/Kconfig"
31source "drivers/net/ethernet/chelsio/Kconfig"
32source "drivers/net/ethernet/cirrus/Kconfig"
33source "drivers/net/ethernet/cisco/Kconfig"
34source "drivers/net/ethernet/davicom/Kconfig"
35
36config DNET
37	tristate "Dave ethernet support (DNET)"
38	depends on HAS_IOMEM
39	select PHYLIB
40	---help---
41	  The Dave ethernet interface (DNET) is found on Qong Board FPGA.
42	  Say Y to include support for the DNET chip.
43
44	  To compile this driver as a module, choose M here: the module
45	  will be called dnet.
46
47source "drivers/net/ethernet/dec/Kconfig"
48source "drivers/net/ethernet/dlink/Kconfig"
49source "drivers/net/ethernet/emulex/Kconfig"
50source "drivers/net/ethernet/neterion/Kconfig"
51source "drivers/net/ethernet/faraday/Kconfig"
52source "drivers/net/ethernet/freescale/Kconfig"
53source "drivers/net/ethernet/fujitsu/Kconfig"
54source "drivers/net/ethernet/hp/Kconfig"
55source "drivers/net/ethernet/ibm/Kconfig"
56source "drivers/net/ethernet/intel/Kconfig"
57source "drivers/net/ethernet/i825xx/Kconfig"
58source "drivers/net/ethernet/xscale/Kconfig"
59source "drivers/net/ethernet/icplus/Kconfig"
60
61config JME
62	tristate "JMicron(R) PCI-Express Gigabit Ethernet support"
63	depends on PCI
64	select CRC32
65	select NET_CORE
66	select MII
67	---help---
68	  This driver supports the PCI-Express gigabit ethernet adapters
69	  based on JMicron JMC250 chipset.
70
71	  To compile this driver as a module, choose M here. The module
72	  will be called jme.
73
74config KORINA
75	tristate "Korina (IDT RC32434) Ethernet support"
76	depends on MIKROTIK_RB532
77	---help---
78	  If you have a Mikrotik RouterBoard 500 or IDT RC32434
79	  based system say Y. Otherwise say N.
80
81config LANTIQ_ETOP
82	tristate "Lantiq SoC ETOP driver"
83	depends on SOC_TYPE_XWAY
84	---help---
85	  Support for the MII0 inside the Lantiq SoC
86
87source "drivers/net/ethernet/marvell/Kconfig"
88source "drivers/net/ethernet/mellanox/Kconfig"
89source "drivers/net/ethernet/micrel/Kconfig"
90source "drivers/net/ethernet/microchip/Kconfig"
91
92config MIPS_SIM_NET
93	tristate "MIPS simulator Network device"
94	depends on MIPS_SIM
95	---help---
96	  The MIPSNET device is a simple Ethernet network device which is
97	  emulated by the MIPS Simulator.
98	  If you are not using a MIPSsim or are unsure, say N.
99
100source "drivers/net/ethernet/myricom/Kconfig"
101
102config FEALNX
103	tristate "Myson MTD-8xx PCI Ethernet support"
104	depends on PCI
105	select CRC32
106	select NET_CORE
107	select MII
108	---help---
109	  Say Y here to support the Myson MTD-800 family of PCI-based Ethernet
110	  cards. <http://www.myson.com.tw/>
111
112source "drivers/net/ethernet/natsemi/Kconfig"
113source "drivers/net/ethernet/8390/Kconfig"
114
115config NET_NETX
116	tristate "NetX Ethernet support"
117	select NET_CORE
118	select MII
119	depends on ARCH_NETX
120	---help---
121	  This is support for the Hilscher netX builtin Ethernet ports
122
123	  To compile this driver as a module, choose M here. The module
124	  will be called netx-eth.
125
126source "drivers/net/ethernet/nuvoton/Kconfig"
127source "drivers/net/ethernet/nvidia/Kconfig"
128source "drivers/net/ethernet/octeon/Kconfig"
129source "drivers/net/ethernet/oki-semi/Kconfig"
130
131config ETHOC
132	tristate "OpenCores 10/100 Mbps Ethernet MAC support"
133	depends on HAS_IOMEM && HAS_DMA
134	select NET_CORE
135	select MII
136	select PHYLIB
137	select CRC32
138	select BITREVERSE
139	---help---
140	  Say Y here if you want to use the OpenCores 10/100 Mbps Ethernet MAC.
141
142source "drivers/net/ethernet/packetengines/Kconfig"
143source "drivers/net/ethernet/pasemi/Kconfig"
144source "drivers/net/ethernet/qlogic/Kconfig"
145source "drivers/net/ethernet/racal/Kconfig"
146source "drivers/net/ethernet/realtek/Kconfig"
147source "drivers/net/ethernet/renesas/Kconfig"
148source "drivers/net/ethernet/rdc/Kconfig"
149
150config S6GMAC
151	tristate "S6105 GMAC ethernet support"
152	depends on XTENSA_VARIANT_S6000
153	select PHYLIB
154	---help---
155	  This driver supports the on chip ethernet device on the
156	  S6105 xtensa processor.
157
158	  To compile this driver as a module, choose M here. The module
159	  will be called s6gmac.
160
161source "drivers/net/ethernet/seeq/Kconfig"
162source "drivers/net/ethernet/sis/Kconfig"
163source "drivers/net/ethernet/sfc/Kconfig"
164source "drivers/net/ethernet/sgi/Kconfig"
165source "drivers/net/ethernet/smsc/Kconfig"
166source "drivers/net/ethernet/stmicro/Kconfig"
167source "drivers/net/ethernet/sun/Kconfig"
168source "drivers/net/ethernet/tehuti/Kconfig"
169source "drivers/net/ethernet/ti/Kconfig"
170source "drivers/net/ethernet/tile/Kconfig"
171source "drivers/net/ethernet/toshiba/Kconfig"
172source "drivers/net/ethernet/tundra/Kconfig"
173source "drivers/net/ethernet/via/Kconfig"
174source "drivers/net/ethernet/xilinx/Kconfig"
175source "drivers/net/ethernet/xircom/Kconfig"
176
177endif # ETHERNET
178