xref: /openbmc/linux/drivers/net/ethernet/Kconfig (revision d2999e1b) 
1#
2# Ethernet LAN device configuration
3#
4
5menuconfig ETHERNET
6	bool "Ethernet driver support"
7	depends on NET
8	default y
9	---help---
10	  This section contains all the Ethernet device drivers.
11
12if ETHERNET
13
14config MDIO
15	tristate
16
17config SUNGEM_PHY
18	tristate
19
20source "drivers/net/ethernet/3com/Kconfig"
21source "drivers/net/ethernet/adaptec/Kconfig"
22source "drivers/net/ethernet/aeroflex/Kconfig"
23source "drivers/net/ethernet/allwinner/Kconfig"
24source "drivers/net/ethernet/alteon/Kconfig"
25source "drivers/net/ethernet/altera/Kconfig"
26source "drivers/net/ethernet/amd/Kconfig"
27source "drivers/net/ethernet/apple/Kconfig"
28source "drivers/net/ethernet/arc/Kconfig"
29source "drivers/net/ethernet/atheros/Kconfig"
30source "drivers/net/ethernet/cadence/Kconfig"
31source "drivers/net/ethernet/adi/Kconfig"
32source "drivers/net/ethernet/broadcom/Kconfig"
33source "drivers/net/ethernet/brocade/Kconfig"
34source "drivers/net/ethernet/calxeda/Kconfig"
35source "drivers/net/ethernet/chelsio/Kconfig"
36source "drivers/net/ethernet/cirrus/Kconfig"
37source "drivers/net/ethernet/cisco/Kconfig"
38
39config CX_ECAT
40	tristate "Beckhoff CX5020 EtherCAT master support"
41	depends on PCI
42	depends on X86 || COMPILE_TEST
43	---help---
44	  Driver for EtherCAT master module located on CCAT FPGA
45	  that can be found on Beckhoff CX5020, and possibly other of CX
46	  Beckhoff CX series industrial PCs.
47
48	  To compile this driver as a module, choose M here. The module
49	  will be called ec_bhf.
50
51source "drivers/net/ethernet/davicom/Kconfig"
52
53config DNET
54	tristate "Dave ethernet support (DNET)"
55	depends on HAS_IOMEM
56	select PHYLIB
57	---help---
58	  The Dave ethernet interface (DNET) is found on Qong Board FPGA.
59	  Say Y to include support for the DNET chip.
60
61	  To compile this driver as a module, choose M here: the module
62	  will be called dnet.
63
64source "drivers/net/ethernet/dec/Kconfig"
65source "drivers/net/ethernet/dlink/Kconfig"
66source "drivers/net/ethernet/emulex/Kconfig"
67source "drivers/net/ethernet/neterion/Kconfig"
68source "drivers/net/ethernet/faraday/Kconfig"
69source "drivers/net/ethernet/freescale/Kconfig"
70source "drivers/net/ethernet/fujitsu/Kconfig"
71source "drivers/net/ethernet/hisilicon/Kconfig"
72source "drivers/net/ethernet/hp/Kconfig"
73source "drivers/net/ethernet/ibm/Kconfig"
74source "drivers/net/ethernet/intel/Kconfig"
75source "drivers/net/ethernet/i825xx/Kconfig"
76source "drivers/net/ethernet/xscale/Kconfig"
77source "drivers/net/ethernet/icplus/Kconfig"
78
79config JME
80	tristate "JMicron(R) PCI-Express Gigabit Ethernet support"
81	depends on PCI
82	select CRC32
83	select MII
84	---help---
85	  This driver supports the PCI-Express gigabit ethernet adapters
86	  based on JMicron JMC250 chipset.
87
88	  To compile this driver as a module, choose M here. The module
89	  will be called jme.
90
91config KORINA
92	tristate "Korina (IDT RC32434) Ethernet support"
93	depends on MIKROTIK_RB532
94	---help---
95	  If you have a Mikrotik RouterBoard 500 or IDT RC32434
96	  based system say Y. Otherwise say N.
97
98config LANTIQ_ETOP
99	tristate "Lantiq SoC ETOP driver"
100	depends on SOC_TYPE_XWAY
101	---help---
102	  Support for the MII0 inside the Lantiq SoC
103
104source "drivers/net/ethernet/marvell/Kconfig"
105source "drivers/net/ethernet/mellanox/Kconfig"
106source "drivers/net/ethernet/micrel/Kconfig"
107source "drivers/net/ethernet/microchip/Kconfig"
108source "drivers/net/ethernet/moxa/Kconfig"
109source "drivers/net/ethernet/myricom/Kconfig"
110
111config FEALNX
112	tristate "Myson MTD-8xx PCI Ethernet support"
113	depends on PCI
114	select CRC32
115	select MII
116	---help---
117	  Say Y here to support the Myson MTD-800 family of PCI-based Ethernet
118	  cards. <http://www.myson.com.tw/>
119
120source "drivers/net/ethernet/natsemi/Kconfig"
121source "drivers/net/ethernet/8390/Kconfig"
122
123config NET_NETX
124	tristate "NetX Ethernet support"
125	select MII
126	depends on ARCH_NETX
127	---help---
128	  This is support for the Hilscher netX builtin Ethernet ports
129
130	  To compile this driver as a module, choose M here. The module
131	  will be called netx-eth.
132
133source "drivers/net/ethernet/nuvoton/Kconfig"
134source "drivers/net/ethernet/nvidia/Kconfig"
135source "drivers/net/ethernet/nxp/Kconfig"
136source "drivers/net/ethernet/octeon/Kconfig"
137source "drivers/net/ethernet/oki-semi/Kconfig"
138
139config ETHOC
140	tristate "OpenCores 10/100 Mbps Ethernet MAC support"
141	depends on HAS_IOMEM && HAS_DMA
142	select MII
143	select PHYLIB
144	select CRC32
145	select BITREVERSE
146	---help---
147	  Say Y here if you want to use the OpenCores 10/100 Mbps Ethernet MAC.
148
149source "drivers/net/ethernet/packetengines/Kconfig"
150source "drivers/net/ethernet/pasemi/Kconfig"
151source "drivers/net/ethernet/qlogic/Kconfig"
152source "drivers/net/ethernet/realtek/Kconfig"
153source "drivers/net/ethernet/renesas/Kconfig"
154source "drivers/net/ethernet/rdc/Kconfig"
155
156config S6GMAC
157	tristate "S6105 GMAC ethernet support"
158	depends on XTENSA_VARIANT_S6000
159	select PHYLIB
160	---help---
161	  This driver supports the on chip ethernet device on the
162	  S6105 xtensa processor.
163
164	  To compile this driver as a module, choose M here. The module
165	  will be called s6gmac.
166
167source "drivers/net/ethernet/samsung/Kconfig"
168source "drivers/net/ethernet/seeq/Kconfig"
169source "drivers/net/ethernet/silan/Kconfig"
170source "drivers/net/ethernet/sis/Kconfig"
171source "drivers/net/ethernet/sfc/Kconfig"
172source "drivers/net/ethernet/sgi/Kconfig"
173source "drivers/net/ethernet/smsc/Kconfig"
174source "drivers/net/ethernet/stmicro/Kconfig"
175source "drivers/net/ethernet/sun/Kconfig"
176source "drivers/net/ethernet/tehuti/Kconfig"
177source "drivers/net/ethernet/ti/Kconfig"
178source "drivers/net/ethernet/tile/Kconfig"
179source "drivers/net/ethernet/toshiba/Kconfig"
180source "drivers/net/ethernet/tundra/Kconfig"
181source "drivers/net/ethernet/via/Kconfig"
182source "drivers/net/ethernet/wiznet/Kconfig"
183source "drivers/net/ethernet/xilinx/Kconfig"
184source "drivers/net/ethernet/xircom/Kconfig"
185
186endif # ETHERNET
187