1# 2# Ethernet LAN device configuration 3# 4 5menuconfig ETHERNET 6 bool "Ethernet driver support" 7 depends on NET 8 default y 9 ---help--- 10 This section contains all the Ethernet device drivers. 11 12if ETHERNET 13 14config MDIO 15 tristate 16 17config SUNGEM_PHY 18 tristate 19 20source "drivers/net/ethernet/3com/Kconfig" 21source "drivers/net/ethernet/adaptec/Kconfig" 22source "drivers/net/ethernet/aeroflex/Kconfig" 23source "drivers/net/ethernet/agere/Kconfig" 24source "drivers/net/ethernet/allwinner/Kconfig" 25source "drivers/net/ethernet/alteon/Kconfig" 26source "drivers/net/ethernet/altera/Kconfig" 27source "drivers/net/ethernet/amd/Kconfig" 28source "drivers/net/ethernet/apm/Kconfig" 29source "drivers/net/ethernet/apple/Kconfig" 30source "drivers/net/ethernet/arc/Kconfig" 31source "drivers/net/ethernet/atheros/Kconfig" 32source "drivers/net/ethernet/cadence/Kconfig" 33source "drivers/net/ethernet/adi/Kconfig" 34source "drivers/net/ethernet/broadcom/Kconfig" 35source "drivers/net/ethernet/brocade/Kconfig" 36source "drivers/net/ethernet/calxeda/Kconfig" 37source "drivers/net/ethernet/cavium/Kconfig" 38source "drivers/net/ethernet/chelsio/Kconfig" 39source "drivers/net/ethernet/cirrus/Kconfig" 40source "drivers/net/ethernet/cisco/Kconfig" 41 42config CX_ECAT 43 tristate "Beckhoff CX5020 EtherCAT master support" 44 depends on PCI 45 depends on X86 || COMPILE_TEST 46 ---help--- 47 Driver for EtherCAT master module located on CCAT FPGA 48 that can be found on Beckhoff CX5020, and possibly other of CX 49 Beckhoff CX series industrial PCs. 50 51 To compile this driver as a module, choose M here. The module 52 will be called ec_bhf. 53 54source "drivers/net/ethernet/davicom/Kconfig" 55 56config DNET 57 tristate "Dave ethernet support (DNET)" 58 depends on HAS_IOMEM 59 select PHYLIB 60 ---help--- 61 The Dave ethernet interface (DNET) is found on Qong Board FPGA. 62 Say Y to include support for the DNET chip. 63 64 To compile this driver as a module, choose M here: the module 65 will be called dnet. 66 67source "drivers/net/ethernet/dec/Kconfig" 68source "drivers/net/ethernet/dlink/Kconfig" 69source "drivers/net/ethernet/emulex/Kconfig" 70source "drivers/net/ethernet/ezchip/Kconfig" 71source "drivers/net/ethernet/neterion/Kconfig" 72source "drivers/net/ethernet/faraday/Kconfig" 73source "drivers/net/ethernet/freescale/Kconfig" 74source "drivers/net/ethernet/fujitsu/Kconfig" 75source "drivers/net/ethernet/hisilicon/Kconfig" 76source "drivers/net/ethernet/hp/Kconfig" 77source "drivers/net/ethernet/ibm/Kconfig" 78source "drivers/net/ethernet/intel/Kconfig" 79source "drivers/net/ethernet/i825xx/Kconfig" 80source "drivers/net/ethernet/xscale/Kconfig" 81source "drivers/net/ethernet/icplus/Kconfig" 82 83config JME 84 tristate "JMicron(R) PCI-Express Gigabit Ethernet support" 85 depends on PCI 86 select CRC32 87 select MII 88 ---help--- 89 This driver supports the PCI-Express gigabit ethernet adapters 90 based on JMicron JMC250 chipset. 91 92 To compile this driver as a module, choose M here. The module 93 will be called jme. 94 95config KORINA 96 tristate "Korina (IDT RC32434) Ethernet support" 97 depends on MIKROTIK_RB532 98 ---help--- 99 If you have a Mikrotik RouterBoard 500 or IDT RC32434 100 based system say Y. Otherwise say N. 101 102config LANTIQ_ETOP 103 tristate "Lantiq SoC ETOP driver" 104 depends on SOC_TYPE_XWAY 105 ---help--- 106 Support for the MII0 inside the Lantiq SoC 107 108source "drivers/net/ethernet/marvell/Kconfig" 109source "drivers/net/ethernet/mellanox/Kconfig" 110source "drivers/net/ethernet/micrel/Kconfig" 111source "drivers/net/ethernet/microchip/Kconfig" 112source "drivers/net/ethernet/moxa/Kconfig" 113source "drivers/net/ethernet/myricom/Kconfig" 114 115config FEALNX 116 tristate "Myson MTD-8xx PCI Ethernet support" 117 depends on PCI 118 select CRC32 119 select MII 120 ---help--- 121 Say Y here to support the Myson MTD-800 family of PCI-based Ethernet 122 cards. <http://www.myson.com.tw/> 123 124source "drivers/net/ethernet/natsemi/Kconfig" 125source "drivers/net/ethernet/8390/Kconfig" 126 127config NET_NETX 128 tristate "NetX Ethernet support" 129 select MII 130 depends on ARCH_NETX 131 ---help--- 132 This is support for the Hilscher netX builtin Ethernet ports 133 134 To compile this driver as a module, choose M here. The module 135 will be called netx-eth. 136 137source "drivers/net/ethernet/nuvoton/Kconfig" 138source "drivers/net/ethernet/nvidia/Kconfig" 139source "drivers/net/ethernet/nxp/Kconfig" 140source "drivers/net/ethernet/octeon/Kconfig" 141source "drivers/net/ethernet/oki-semi/Kconfig" 142 143config ETHOC 144 tristate "OpenCores 10/100 Mbps Ethernet MAC support" 145 depends on HAS_IOMEM && HAS_DMA 146 select MII 147 select PHYLIB 148 select CRC32 149 select BITREVERSE 150 ---help--- 151 Say Y here if you want to use the OpenCores 10/100 Mbps Ethernet MAC. 152 153source "drivers/net/ethernet/packetengines/Kconfig" 154source "drivers/net/ethernet/pasemi/Kconfig" 155source "drivers/net/ethernet/qlogic/Kconfig" 156source "drivers/net/ethernet/qualcomm/Kconfig" 157source "drivers/net/ethernet/realtek/Kconfig" 158source "drivers/net/ethernet/renesas/Kconfig" 159source "drivers/net/ethernet/rdc/Kconfig" 160source "drivers/net/ethernet/rocker/Kconfig" 161source "drivers/net/ethernet/samsung/Kconfig" 162source "drivers/net/ethernet/seeq/Kconfig" 163source "drivers/net/ethernet/silan/Kconfig" 164source "drivers/net/ethernet/sis/Kconfig" 165source "drivers/net/ethernet/sfc/Kconfig" 166source "drivers/net/ethernet/sgi/Kconfig" 167source "drivers/net/ethernet/smsc/Kconfig" 168source "drivers/net/ethernet/stmicro/Kconfig" 169source "drivers/net/ethernet/sun/Kconfig" 170source "drivers/net/ethernet/synopsys/Kconfig" 171source "drivers/net/ethernet/tehuti/Kconfig" 172source "drivers/net/ethernet/ti/Kconfig" 173source "drivers/net/ethernet/tile/Kconfig" 174source "drivers/net/ethernet/toshiba/Kconfig" 175source "drivers/net/ethernet/tundra/Kconfig" 176source "drivers/net/ethernet/via/Kconfig" 177source "drivers/net/ethernet/wiznet/Kconfig" 178source "drivers/net/ethernet/xilinx/Kconfig" 179source "drivers/net/ethernet/xircom/Kconfig" 180 181endif # ETHERNET 182