1# 2# Ethernet LAN device configuration 3# 4 5menuconfig ETHERNET 6 bool "Ethernet driver support" 7 depends on NET 8 default y 9 ---help--- 10 This section contains all the Ethernet device drivers. 11 12if ETHERNET 13 14config MDIO 15 tristate 16 17config SUNGEM_PHY 18 tristate 19 20source "drivers/net/ethernet/3com/Kconfig" 21source "drivers/net/ethernet/adaptec/Kconfig" 22source "drivers/net/ethernet/aeroflex/Kconfig" 23source "drivers/net/ethernet/agere/Kconfig" 24source "drivers/net/ethernet/allwinner/Kconfig" 25source "drivers/net/ethernet/alteon/Kconfig" 26source "drivers/net/ethernet/altera/Kconfig" 27source "drivers/net/ethernet/amd/Kconfig" 28source "drivers/net/ethernet/apm/Kconfig" 29source "drivers/net/ethernet/apple/Kconfig" 30source "drivers/net/ethernet/arc/Kconfig" 31source "drivers/net/ethernet/atheros/Kconfig" 32source "drivers/net/ethernet/aurora/Kconfig" 33source "drivers/net/ethernet/cadence/Kconfig" 34source "drivers/net/ethernet/adi/Kconfig" 35source "drivers/net/ethernet/broadcom/Kconfig" 36source "drivers/net/ethernet/brocade/Kconfig" 37source "drivers/net/ethernet/calxeda/Kconfig" 38source "drivers/net/ethernet/cavium/Kconfig" 39source "drivers/net/ethernet/chelsio/Kconfig" 40source "drivers/net/ethernet/cirrus/Kconfig" 41source "drivers/net/ethernet/cisco/Kconfig" 42 43config CX_ECAT 44 tristate "Beckhoff CX5020 EtherCAT master support" 45 depends on PCI 46 depends on X86 || COMPILE_TEST 47 ---help--- 48 Driver for EtherCAT master module located on CCAT FPGA 49 that can be found on Beckhoff CX5020, and possibly other of CX 50 Beckhoff CX series industrial PCs. 51 52 To compile this driver as a module, choose M here. The module 53 will be called ec_bhf. 54 55source "drivers/net/ethernet/davicom/Kconfig" 56 57config DNET 58 tristate "Dave ethernet support (DNET)" 59 depends on HAS_IOMEM 60 select PHYLIB 61 ---help--- 62 The Dave ethernet interface (DNET) is found on Qong Board FPGA. 63 Say Y to include support for the DNET chip. 64 65 To compile this driver as a module, choose M here: the module 66 will be called dnet. 67 68source "drivers/net/ethernet/dec/Kconfig" 69source "drivers/net/ethernet/dlink/Kconfig" 70source "drivers/net/ethernet/emulex/Kconfig" 71source "drivers/net/ethernet/ezchip/Kconfig" 72source "drivers/net/ethernet/neterion/Kconfig" 73source "drivers/net/ethernet/faraday/Kconfig" 74source "drivers/net/ethernet/freescale/Kconfig" 75source "drivers/net/ethernet/fujitsu/Kconfig" 76source "drivers/net/ethernet/hisilicon/Kconfig" 77source "drivers/net/ethernet/hp/Kconfig" 78source "drivers/net/ethernet/ibm/Kconfig" 79source "drivers/net/ethernet/intel/Kconfig" 80source "drivers/net/ethernet/i825xx/Kconfig" 81source "drivers/net/ethernet/xscale/Kconfig" 82 83config JME 84 tristate "JMicron(R) PCI-Express Gigabit Ethernet support" 85 depends on PCI 86 select CRC32 87 select MII 88 ---help--- 89 This driver supports the PCI-Express gigabit ethernet adapters 90 based on JMicron JMC250 chipset. 91 92 To compile this driver as a module, choose M here. The module 93 will be called jme. 94 95config KORINA 96 tristate "Korina (IDT RC32434) Ethernet support" 97 depends on MIKROTIK_RB532 98 ---help--- 99 If you have a Mikrotik RouterBoard 500 or IDT RC32434 100 based system say Y. Otherwise say N. 101 102config LANTIQ_ETOP 103 tristate "Lantiq SoC ETOP driver" 104 depends on SOC_TYPE_XWAY 105 ---help--- 106 Support for the MII0 inside the Lantiq SoC 107 108source "drivers/net/ethernet/marvell/Kconfig" 109source "drivers/net/ethernet/mediatek/Kconfig" 110source "drivers/net/ethernet/mellanox/Kconfig" 111source "drivers/net/ethernet/micrel/Kconfig" 112source "drivers/net/ethernet/microchip/Kconfig" 113source "drivers/net/ethernet/moxa/Kconfig" 114source "drivers/net/ethernet/myricom/Kconfig" 115 116config FEALNX 117 tristate "Myson MTD-8xx PCI Ethernet support" 118 depends on PCI 119 select CRC32 120 select MII 121 ---help--- 122 Say Y here to support the Myson MTD-800 family of PCI-based Ethernet 123 cards. <http://www.myson.com.tw/> 124 125source "drivers/net/ethernet/natsemi/Kconfig" 126source "drivers/net/ethernet/netronome/Kconfig" 127source "drivers/net/ethernet/8390/Kconfig" 128 129config NET_NETX 130 tristate "NetX Ethernet support" 131 select MII 132 depends on ARCH_NETX 133 ---help--- 134 This is support for the Hilscher netX builtin Ethernet ports 135 136 To compile this driver as a module, choose M here. The module 137 will be called netx-eth. 138 139source "drivers/net/ethernet/nuvoton/Kconfig" 140source "drivers/net/ethernet/nvidia/Kconfig" 141source "drivers/net/ethernet/nxp/Kconfig" 142source "drivers/net/ethernet/oki-semi/Kconfig" 143 144config ETHOC 145 tristate "OpenCores 10/100 Mbps Ethernet MAC support" 146 depends on HAS_IOMEM && HAS_DMA 147 select MII 148 select PHYLIB 149 select CRC32 150 select BITREVERSE 151 ---help--- 152 Say Y here if you want to use the OpenCores 10/100 Mbps Ethernet MAC. 153 154source "drivers/net/ethernet/packetengines/Kconfig" 155source "drivers/net/ethernet/pasemi/Kconfig" 156source "drivers/net/ethernet/qlogic/Kconfig" 157source "drivers/net/ethernet/qualcomm/Kconfig" 158source "drivers/net/ethernet/realtek/Kconfig" 159source "drivers/net/ethernet/renesas/Kconfig" 160source "drivers/net/ethernet/rdc/Kconfig" 161source "drivers/net/ethernet/rocker/Kconfig" 162source "drivers/net/ethernet/samsung/Kconfig" 163source "drivers/net/ethernet/seeq/Kconfig" 164source "drivers/net/ethernet/silan/Kconfig" 165source "drivers/net/ethernet/sis/Kconfig" 166source "drivers/net/ethernet/sfc/Kconfig" 167source "drivers/net/ethernet/sgi/Kconfig" 168source "drivers/net/ethernet/smsc/Kconfig" 169source "drivers/net/ethernet/stmicro/Kconfig" 170source "drivers/net/ethernet/sun/Kconfig" 171source "drivers/net/ethernet/synopsys/Kconfig" 172source "drivers/net/ethernet/tehuti/Kconfig" 173source "drivers/net/ethernet/ti/Kconfig" 174source "drivers/net/ethernet/tile/Kconfig" 175source "drivers/net/ethernet/toshiba/Kconfig" 176source "drivers/net/ethernet/tundra/Kconfig" 177source "drivers/net/ethernet/via/Kconfig" 178source "drivers/net/ethernet/wiznet/Kconfig" 179source "drivers/net/ethernet/xilinx/Kconfig" 180source "drivers/net/ethernet/xircom/Kconfig" 181 182endif # ETHERNET 183