xref: /openbmc/linux/drivers/net/ethernet/Kconfig (revision 5104d265) 
1#
2# Ethernet LAN device configuration
3#
4
5menuconfig ETHERNET
6	bool "Ethernet driver support"
7	depends on NET
8	default y
9	---help---
10	  This section contains all the Ethernet device drivers.
11
12if ETHERNET
13
14config MDIO
15	tristate
16
17config SUNGEM_PHY
18	tristate
19
20source "drivers/net/ethernet/3com/Kconfig"
21source "drivers/net/ethernet/adaptec/Kconfig"
22source "drivers/net/ethernet/aeroflex/Kconfig"
23source "drivers/net/ethernet/allwinner/Kconfig"
24source "drivers/net/ethernet/alteon/Kconfig"
25source "drivers/net/ethernet/amd/Kconfig"
26source "drivers/net/ethernet/apple/Kconfig"
27source "drivers/net/ethernet/arc/Kconfig"
28source "drivers/net/ethernet/atheros/Kconfig"
29source "drivers/net/ethernet/cadence/Kconfig"
30source "drivers/net/ethernet/adi/Kconfig"
31source "drivers/net/ethernet/broadcom/Kconfig"
32source "drivers/net/ethernet/brocade/Kconfig"
33source "drivers/net/ethernet/calxeda/Kconfig"
34source "drivers/net/ethernet/chelsio/Kconfig"
35source "drivers/net/ethernet/cirrus/Kconfig"
36source "drivers/net/ethernet/cisco/Kconfig"
37source "drivers/net/ethernet/davicom/Kconfig"
38
39config DNET
40	tristate "Dave ethernet support (DNET)"
41	depends on HAS_IOMEM
42	select PHYLIB
43	---help---
44	  The Dave ethernet interface (DNET) is found on Qong Board FPGA.
45	  Say Y to include support for the DNET chip.
46
47	  To compile this driver as a module, choose M here: the module
48	  will be called dnet.
49
50source "drivers/net/ethernet/dec/Kconfig"
51source "drivers/net/ethernet/dlink/Kconfig"
52source "drivers/net/ethernet/emulex/Kconfig"
53source "drivers/net/ethernet/neterion/Kconfig"
54source "drivers/net/ethernet/faraday/Kconfig"
55source "drivers/net/ethernet/freescale/Kconfig"
56source "drivers/net/ethernet/fujitsu/Kconfig"
57source "drivers/net/ethernet/hp/Kconfig"
58source "drivers/net/ethernet/ibm/Kconfig"
59source "drivers/net/ethernet/intel/Kconfig"
60source "drivers/net/ethernet/i825xx/Kconfig"
61source "drivers/net/ethernet/xscale/Kconfig"
62source "drivers/net/ethernet/icplus/Kconfig"
63
64config JME
65	tristate "JMicron(R) PCI-Express Gigabit Ethernet support"
66	depends on PCI
67	select CRC32
68	select MII
69	---help---
70	  This driver supports the PCI-Express gigabit ethernet adapters
71	  based on JMicron JMC250 chipset.
72
73	  To compile this driver as a module, choose M here. The module
74	  will be called jme.
75
76config KORINA
77	tristate "Korina (IDT RC32434) Ethernet support"
78	depends on MIKROTIK_RB532
79	---help---
80	  If you have a Mikrotik RouterBoard 500 or IDT RC32434
81	  based system say Y. Otherwise say N.
82
83config LANTIQ_ETOP
84	tristate "Lantiq SoC ETOP driver"
85	depends on SOC_TYPE_XWAY
86	---help---
87	  Support for the MII0 inside the Lantiq SoC
88
89source "drivers/net/ethernet/marvell/Kconfig"
90source "drivers/net/ethernet/mellanox/Kconfig"
91source "drivers/net/ethernet/micrel/Kconfig"
92source "drivers/net/ethernet/microchip/Kconfig"
93source "drivers/net/ethernet/myricom/Kconfig"
94
95config FEALNX
96	tristate "Myson MTD-8xx PCI Ethernet support"
97	depends on PCI
98	select CRC32
99	select MII
100	---help---
101	  Say Y here to support the Myson MTD-800 family of PCI-based Ethernet
102	  cards. <http://www.myson.com.tw/>
103
104source "drivers/net/ethernet/natsemi/Kconfig"
105source "drivers/net/ethernet/8390/Kconfig"
106
107config NET_NETX
108	tristate "NetX Ethernet support"
109	select MII
110	depends on ARCH_NETX
111	---help---
112	  This is support for the Hilscher netX builtin Ethernet ports
113
114	  To compile this driver as a module, choose M here. The module
115	  will be called netx-eth.
116
117source "drivers/net/ethernet/nuvoton/Kconfig"
118source "drivers/net/ethernet/nvidia/Kconfig"
119source "drivers/net/ethernet/nxp/Kconfig"
120source "drivers/net/ethernet/octeon/Kconfig"
121source "drivers/net/ethernet/oki-semi/Kconfig"
122
123config ETHOC
124	tristate "OpenCores 10/100 Mbps Ethernet MAC support"
125	depends on HAS_IOMEM && HAS_DMA
126	select MII
127	select PHYLIB
128	select CRC32
129	select BITREVERSE
130	---help---
131	  Say Y here if you want to use the OpenCores 10/100 Mbps Ethernet MAC.
132
133source "drivers/net/ethernet/packetengines/Kconfig"
134source "drivers/net/ethernet/pasemi/Kconfig"
135source "drivers/net/ethernet/qlogic/Kconfig"
136source "drivers/net/ethernet/realtek/Kconfig"
137source "drivers/net/ethernet/renesas/Kconfig"
138source "drivers/net/ethernet/rdc/Kconfig"
139
140config S6GMAC
141	tristate "S6105 GMAC ethernet support"
142	depends on XTENSA_VARIANT_S6000
143	select PHYLIB
144	---help---
145	  This driver supports the on chip ethernet device on the
146	  S6105 xtensa processor.
147
148	  To compile this driver as a module, choose M here. The module
149	  will be called s6gmac.
150
151source "drivers/net/ethernet/seeq/Kconfig"
152source "drivers/net/ethernet/silan/Kconfig"
153source "drivers/net/ethernet/sis/Kconfig"
154source "drivers/net/ethernet/sfc/Kconfig"
155source "drivers/net/ethernet/sgi/Kconfig"
156source "drivers/net/ethernet/smsc/Kconfig"
157source "drivers/net/ethernet/stmicro/Kconfig"
158source "drivers/net/ethernet/sun/Kconfig"
159source "drivers/net/ethernet/tehuti/Kconfig"
160source "drivers/net/ethernet/ti/Kconfig"
161source "drivers/net/ethernet/tile/Kconfig"
162source "drivers/net/ethernet/toshiba/Kconfig"
163source "drivers/net/ethernet/tundra/Kconfig"
164source "drivers/net/ethernet/via/Kconfig"
165source "drivers/net/ethernet/wiznet/Kconfig"
166source "drivers/net/ethernet/xilinx/Kconfig"
167source "drivers/net/ethernet/xircom/Kconfig"
168
169endif # ETHERNET
170