xref: /openbmc/linux/drivers/net/ethernet/Kconfig (revision 1eb4c977) 
1#
2# Ethernet LAN device configuration
3#
4
5menuconfig ETHERNET
6	bool "Ethernet driver support"
7	depends on NET
8	default y
9	---help---
10	  This section contains all the Ethernet device drivers.
11
12if ETHERNET
13
14config MDIO
15	tristate
16
17config SUNGEM_PHY
18	tristate
19
20source "drivers/net/ethernet/3com/Kconfig"
21source "drivers/net/ethernet/adaptec/Kconfig"
22source "drivers/net/ethernet/aeroflex/Kconfig"
23source "drivers/net/ethernet/alteon/Kconfig"
24source "drivers/net/ethernet/amd/Kconfig"
25source "drivers/net/ethernet/apple/Kconfig"
26source "drivers/net/ethernet/atheros/Kconfig"
27source "drivers/net/ethernet/cadence/Kconfig"
28source "drivers/net/ethernet/adi/Kconfig"
29source "drivers/net/ethernet/broadcom/Kconfig"
30source "drivers/net/ethernet/brocade/Kconfig"
31source "drivers/net/ethernet/calxeda/Kconfig"
32source "drivers/net/ethernet/chelsio/Kconfig"
33source "drivers/net/ethernet/cirrus/Kconfig"
34source "drivers/net/ethernet/cisco/Kconfig"
35source "drivers/net/ethernet/davicom/Kconfig"
36
37config DNET
38	tristate "Dave ethernet support (DNET)"
39	depends on HAS_IOMEM
40	select PHYLIB
41	---help---
42	  The Dave ethernet interface (DNET) is found on Qong Board FPGA.
43	  Say Y to include support for the DNET chip.
44
45	  To compile this driver as a module, choose M here: the module
46	  will be called dnet.
47
48source "drivers/net/ethernet/dec/Kconfig"
49source "drivers/net/ethernet/dlink/Kconfig"
50source "drivers/net/ethernet/emulex/Kconfig"
51source "drivers/net/ethernet/neterion/Kconfig"
52source "drivers/net/ethernet/faraday/Kconfig"
53source "drivers/net/ethernet/freescale/Kconfig"
54source "drivers/net/ethernet/fujitsu/Kconfig"
55source "drivers/net/ethernet/hp/Kconfig"
56source "drivers/net/ethernet/ibm/Kconfig"
57source "drivers/net/ethernet/intel/Kconfig"
58source "drivers/net/ethernet/i825xx/Kconfig"
59source "drivers/net/ethernet/xscale/Kconfig"
60source "drivers/net/ethernet/icplus/Kconfig"
61
62config JME
63	tristate "JMicron(R) PCI-Express Gigabit Ethernet support"
64	depends on PCI
65	select CRC32
66	select NET_CORE
67	select MII
68	---help---
69	  This driver supports the PCI-Express gigabit ethernet adapters
70	  based on JMicron JMC250 chipset.
71
72	  To compile this driver as a module, choose M here. The module
73	  will be called jme.
74
75config KORINA
76	tristate "Korina (IDT RC32434) Ethernet support"
77	depends on MIKROTIK_RB532
78	---help---
79	  If you have a Mikrotik RouterBoard 500 or IDT RC32434
80	  based system say Y. Otherwise say N.
81
82config LANTIQ_ETOP
83	tristate "Lantiq SoC ETOP driver"
84	depends on SOC_TYPE_XWAY
85	---help---
86	  Support for the MII0 inside the Lantiq SoC
87
88source "drivers/net/ethernet/marvell/Kconfig"
89source "drivers/net/ethernet/mellanox/Kconfig"
90source "drivers/net/ethernet/micrel/Kconfig"
91source "drivers/net/ethernet/microchip/Kconfig"
92
93config MIPS_SIM_NET
94	tristate "MIPS simulator Network device"
95	depends on MIPS_SIM
96	---help---
97	  The MIPSNET device is a simple Ethernet network device which is
98	  emulated by the MIPS Simulator.
99	  If you are not using a MIPSsim or are unsure, say N.
100
101source "drivers/net/ethernet/myricom/Kconfig"
102
103config FEALNX
104	tristate "Myson MTD-8xx PCI Ethernet support"
105	depends on PCI
106	select CRC32
107	select NET_CORE
108	select MII
109	---help---
110	  Say Y here to support the Myson MTD-800 family of PCI-based Ethernet
111	  cards. <http://www.myson.com.tw/>
112
113source "drivers/net/ethernet/natsemi/Kconfig"
114source "drivers/net/ethernet/8390/Kconfig"
115
116config NET_NETX
117	tristate "NetX Ethernet support"
118	select NET_CORE
119	select MII
120	depends on ARCH_NETX
121	---help---
122	  This is support for the Hilscher netX builtin Ethernet ports
123
124	  To compile this driver as a module, choose M here. The module
125	  will be called netx-eth.
126
127source "drivers/net/ethernet/nuvoton/Kconfig"
128source "drivers/net/ethernet/nvidia/Kconfig"
129source "drivers/net/ethernet/nxp/Kconfig"
130source "drivers/net/ethernet/octeon/Kconfig"
131source "drivers/net/ethernet/oki-semi/Kconfig"
132
133config ETHOC
134	tristate "OpenCores 10/100 Mbps Ethernet MAC support"
135	depends on HAS_IOMEM && HAS_DMA
136	select NET_CORE
137	select MII
138	select PHYLIB
139	select CRC32
140	select BITREVERSE
141	---help---
142	  Say Y here if you want to use the OpenCores 10/100 Mbps Ethernet MAC.
143
144source "drivers/net/ethernet/packetengines/Kconfig"
145source "drivers/net/ethernet/pasemi/Kconfig"
146source "drivers/net/ethernet/qlogic/Kconfig"
147source "drivers/net/ethernet/racal/Kconfig"
148source "drivers/net/ethernet/realtek/Kconfig"
149source "drivers/net/ethernet/renesas/Kconfig"
150source "drivers/net/ethernet/rdc/Kconfig"
151
152config S6GMAC
153	tristate "S6105 GMAC ethernet support"
154	depends on XTENSA_VARIANT_S6000
155	select PHYLIB
156	---help---
157	  This driver supports the on chip ethernet device on the
158	  S6105 xtensa processor.
159
160	  To compile this driver as a module, choose M here. The module
161	  will be called s6gmac.
162
163source "drivers/net/ethernet/seeq/Kconfig"
164source "drivers/net/ethernet/silan/Kconfig"
165source "drivers/net/ethernet/sis/Kconfig"
166source "drivers/net/ethernet/sfc/Kconfig"
167source "drivers/net/ethernet/sgi/Kconfig"
168source "drivers/net/ethernet/smsc/Kconfig"
169source "drivers/net/ethernet/stmicro/Kconfig"
170source "drivers/net/ethernet/sun/Kconfig"
171source "drivers/net/ethernet/tehuti/Kconfig"
172source "drivers/net/ethernet/ti/Kconfig"
173source "drivers/net/ethernet/tile/Kconfig"
174source "drivers/net/ethernet/toshiba/Kconfig"
175source "drivers/net/ethernet/tundra/Kconfig"
176source "drivers/net/ethernet/via/Kconfig"
177source "drivers/net/ethernet/xilinx/Kconfig"
178source "drivers/net/ethernet/xircom/Kconfig"
179
180endif # ETHERNET
181