1 /*====================================================================== 2 3 A PCMCIA ethernet driver for NS8390-based cards 4 5 This driver supports the D-Link DE-650 and Linksys EthernetCard 6 cards, the newer D-Link and Linksys combo cards, Accton EN2212 7 cards, the RPTI EP400, and the PreMax PE-200 in non-shared-memory 8 mode, and the IBM Credit Card Adapter, the NE4100, the Thomas 9 Conrad ethernet card, and the Kingston KNE-PCM/x in shared-memory 10 mode. It will also handle the Socket EA card in either mode. 11 12 Copyright (C) 1999 David A. Hinds -- dahinds@users.sourceforge.net 13 14 pcnet_cs.c 1.153 2003/11/09 18:53:09 15 16 The network driver code is based on Donald Becker's NE2000 code: 17 18 Written 1992,1993 by Donald Becker. 19 Copyright 1993 United States Government as represented by the 20 Director, National Security Agency. This software may be used and 21 distributed according to the terms of the GNU General Public License, 22 incorporated herein by reference. 23 Donald Becker may be reached at becker@scyld.com 24 25 Based also on Keith Moore's changes to Don Becker's code, for IBM 26 CCAE support. Drivers merged back together, and shared-memory 27 Socket EA support added, by Ken Raeburn, September 1995. 28 29 ======================================================================*/ 30 31 #define pr_fmt(fmt) KBUILD_MODNAME ": " fmt 32 33 #include <linux/kernel.h> 34 #include <linux/module.h> 35 #include <linux/ptrace.h> 36 #include <linux/string.h> 37 #include <linux/timer.h> 38 #include <linux/delay.h> 39 #include <linux/netdevice.h> 40 #include <linux/log2.h> 41 #include <linux/etherdevice.h> 42 #include <linux/mii.h> 43 #include "8390.h" 44 45 #include <pcmcia/cistpl.h> 46 #include <pcmcia/ciscode.h> 47 #include <pcmcia/ds.h> 48 #include <pcmcia/cisreg.h> 49 50 #include <asm/io.h> 51 #include <asm/byteorder.h> 52 #include <linux/uaccess.h> 53 54 #define PCNET_CMD 0x00 55 #define PCNET_DATAPORT 0x10 /* NatSemi-defined port window offset. */ 56 #define PCNET_RESET 0x1f /* Issue a read to reset, a write to clear. */ 57 #define PCNET_MISC 0x18 /* For IBM CCAE and Socket EA cards */ 58 59 #define PCNET_START_PG 0x40 /* First page of TX buffer */ 60 #define PCNET_STOP_PG 0x80 /* Last page +1 of RX ring */ 61 62 /* Socket EA cards have a larger packet buffer */ 63 #define SOCKET_START_PG 0x01 64 #define SOCKET_STOP_PG 0xff 65 66 #define PCNET_RDC_TIMEOUT (2*HZ/100) /* Max wait in jiffies for Tx RDC */ 67 68 static const char *if_names[] = { "auto", "10baseT", "10base2"}; 69 70 /*====================================================================*/ 71 72 /* Module parameters */ 73 74 MODULE_AUTHOR("David Hinds <dahinds@users.sourceforge.net>"); 75 MODULE_DESCRIPTION("NE2000 compatible PCMCIA ethernet driver"); 76 MODULE_LICENSE("GPL"); 77 78 #define INT_MODULE_PARM(n, v) static int n = v; module_param(n, int, 0) 79 80 INT_MODULE_PARM(if_port, 1); /* Transceiver type */ 81 INT_MODULE_PARM(use_big_buf, 1); /* use 64K packet buffer? */ 82 INT_MODULE_PARM(mem_speed, 0); /* shared mem speed, in ns */ 83 INT_MODULE_PARM(delay_output, 0); /* pause after xmit? */ 84 INT_MODULE_PARM(delay_time, 4); /* in usec */ 85 INT_MODULE_PARM(use_shmem, -1); /* use shared memory? */ 86 INT_MODULE_PARM(full_duplex, 0); /* full duplex? */ 87 88 /* Ugh! Let the user hardwire the hardware address for queer cards */ 89 static int hw_addr[6] = { 0, /* ... */ }; 90 module_param_array(hw_addr, int, NULL, 0); 91 92 /*====================================================================*/ 93 94 static void mii_phy_probe(struct net_device *dev); 95 static int pcnet_config(struct pcmcia_device *link); 96 static void pcnet_release(struct pcmcia_device *link); 97 static int pcnet_open(struct net_device *dev); 98 static int pcnet_close(struct net_device *dev); 99 static int ei_ioctl(struct net_device *dev, struct ifreq *rq, int cmd); 100 static irqreturn_t ei_irq_wrapper(int irq, void *dev_id); 101 static void ei_watchdog(struct timer_list *t); 102 static void pcnet_reset_8390(struct net_device *dev); 103 static int set_config(struct net_device *dev, struct ifmap *map); 104 static int setup_shmem_window(struct pcmcia_device *link, int start_pg, 105 int stop_pg, int cm_offset); 106 static int setup_dma_config(struct pcmcia_device *link, int start_pg, 107 int stop_pg); 108 109 static void pcnet_detach(struct pcmcia_device *p_dev); 110 111 /*====================================================================*/ 112 113 struct hw_info { 114 u_int offset; 115 u_char a0, a1, a2; 116 u_int flags; 117 }; 118 119 #define DELAY_OUTPUT 0x01 120 #define HAS_MISC_REG 0x02 121 #define USE_BIG_BUF 0x04 122 #define HAS_IBM_MISC 0x08 123 #define IS_DL10019 0x10 124 #define IS_DL10022 0x20 125 #define HAS_MII 0x40 126 #define USE_SHMEM 0x80 /* autodetected */ 127 128 #define AM79C9XX_HOME_PHY 0x00006B90 /* HomePNA PHY */ 129 #define AM79C9XX_ETH_PHY 0x00006B70 /* 10baseT PHY */ 130 #define MII_PHYID_REV_MASK 0xfffffff0 131 #define MII_PHYID_REG1 0x02 132 #define MII_PHYID_REG2 0x03 133 134 static struct hw_info hw_info[] = { 135 { /* Accton EN2212 */ 0x0ff0, 0x00, 0x00, 0xe8, DELAY_OUTPUT }, 136 { /* Allied Telesis LA-PCM */ 0x0ff0, 0x00, 0x00, 0xf4, 0 }, 137 { /* APEX MultiCard */ 0x03f4, 0x00, 0x20, 0xe5, 0 }, 138 { /* ASANTE FriendlyNet */ 0x4910, 0x00, 0x00, 0x94, 139 DELAY_OUTPUT | HAS_IBM_MISC }, 140 { /* Danpex EN-6200P2 */ 0x0110, 0x00, 0x40, 0xc7, 0 }, 141 { /* DataTrek NetCard */ 0x0ff0, 0x00, 0x20, 0xe8, 0 }, 142 { /* Dayna CommuniCard E */ 0x0110, 0x00, 0x80, 0x19, 0 }, 143 { /* D-Link DE-650 */ 0x0040, 0x00, 0x80, 0xc8, 0 }, 144 { /* EP-210 Ethernet */ 0x0110, 0x00, 0x40, 0x33, 0 }, 145 { /* EP4000 Ethernet */ 0x01c0, 0x00, 0x00, 0xb4, 0 }, 146 { /* Epson EEN10B */ 0x0ff0, 0x00, 0x00, 0x48, 147 HAS_MISC_REG | HAS_IBM_MISC }, 148 { /* ELECOM Laneed LD-CDWA */ 0xb8, 0x08, 0x00, 0x42, 0 }, 149 { /* Hypertec Ethernet */ 0x01c0, 0x00, 0x40, 0x4c, 0 }, 150 { /* IBM CCAE */ 0x0ff0, 0x08, 0x00, 0x5a, 151 HAS_MISC_REG | HAS_IBM_MISC }, 152 { /* IBM CCAE */ 0x0ff0, 0x00, 0x04, 0xac, 153 HAS_MISC_REG | HAS_IBM_MISC }, 154 { /* IBM CCAE */ 0x0ff0, 0x00, 0x06, 0x29, 155 HAS_MISC_REG | HAS_IBM_MISC }, 156 { /* IBM FME */ 0x0374, 0x08, 0x00, 0x5a, 157 HAS_MISC_REG | HAS_IBM_MISC }, 158 { /* IBM FME */ 0x0374, 0x00, 0x04, 0xac, 159 HAS_MISC_REG | HAS_IBM_MISC }, 160 { /* Kansai KLA-PCM/T */ 0x0ff0, 0x00, 0x60, 0x87, 161 HAS_MISC_REG | HAS_IBM_MISC }, 162 { /* NSC DP83903 */ 0x0374, 0x08, 0x00, 0x17, 163 HAS_MISC_REG | HAS_IBM_MISC }, 164 { /* NSC DP83903 */ 0x0374, 0x00, 0xc0, 0xa8, 165 HAS_MISC_REG | HAS_IBM_MISC }, 166 { /* NSC DP83903 */ 0x0374, 0x00, 0xa0, 0xb0, 167 HAS_MISC_REG | HAS_IBM_MISC }, 168 { /* NSC DP83903 */ 0x0198, 0x00, 0x20, 0xe0, 169 HAS_MISC_REG | HAS_IBM_MISC }, 170 { /* I-O DATA PCLA/T */ 0x0ff0, 0x00, 0xa0, 0xb0, 0 }, 171 { /* Katron PE-520 */ 0x0110, 0x00, 0x40, 0xf6, 0 }, 172 { /* Kingston KNE-PCM/x */ 0x0ff0, 0x00, 0xc0, 0xf0, 173 HAS_MISC_REG | HAS_IBM_MISC }, 174 { /* Kingston KNE-PCM/x */ 0x0ff0, 0xe2, 0x0c, 0x0f, 175 HAS_MISC_REG | HAS_IBM_MISC }, 176 { /* Kingston KNE-PC2 */ 0x0180, 0x00, 0xc0, 0xf0, 0 }, 177 { /* Maxtech PCN2000 */ 0x5000, 0x00, 0x00, 0xe8, 0 }, 178 { /* NDC Instant-Link */ 0x003a, 0x00, 0x80, 0xc6, 0 }, 179 { /* NE2000 Compatible */ 0x0ff0, 0x00, 0xa0, 0x0c, 0 }, 180 { /* Network General Sniffer */ 0x0ff0, 0x00, 0x00, 0x65, 181 HAS_MISC_REG | HAS_IBM_MISC }, 182 { /* Panasonic VEL211 */ 0x0ff0, 0x00, 0x80, 0x45, 183 HAS_MISC_REG | HAS_IBM_MISC }, 184 { /* PreMax PE-200 */ 0x07f0, 0x00, 0x20, 0xe0, 0 }, 185 { /* RPTI EP400 */ 0x0110, 0x00, 0x40, 0x95, 0 }, 186 { /* SCM Ethernet */ 0x0ff0, 0x00, 0x20, 0xcb, 0 }, 187 { /* Socket EA */ 0x4000, 0x00, 0xc0, 0x1b, 188 DELAY_OUTPUT | HAS_MISC_REG | USE_BIG_BUF }, 189 { /* Socket LP-E CF+ */ 0x01c0, 0x00, 0xc0, 0x1b, 0 }, 190 { /* SuperSocket RE450T */ 0x0110, 0x00, 0xe0, 0x98, 0 }, 191 { /* Volktek NPL-402CT */ 0x0060, 0x00, 0x40, 0x05, 0 }, 192 { /* NEC PC-9801N-J12 */ 0x0ff0, 0x00, 0x00, 0x4c, 0 }, 193 { /* PCMCIA Technology OEM */ 0x01c8, 0x00, 0xa0, 0x0c, 0 } 194 }; 195 196 #define NR_INFO ARRAY_SIZE(hw_info) 197 198 static struct hw_info default_info = { 0, 0, 0, 0, 0 }; 199 static struct hw_info dl10019_info = { 0, 0, 0, 0, IS_DL10019|HAS_MII }; 200 static struct hw_info dl10022_info = { 0, 0, 0, 0, IS_DL10022|HAS_MII }; 201 202 struct pcnet_dev { 203 struct pcmcia_device *p_dev; 204 u_int flags; 205 void __iomem *base; 206 struct timer_list watchdog; 207 int stale, fast_poll; 208 u_char phy_id; 209 u_char eth_phy, pna_phy; 210 u_short link_status; 211 u_long mii_reset; 212 }; 213 214 static inline struct pcnet_dev *PRIV(struct net_device *dev) 215 { 216 char *p = netdev_priv(dev); 217 return (struct pcnet_dev *)(p + sizeof(struct ei_device)); 218 } 219 220 static const struct net_device_ops pcnet_netdev_ops = { 221 .ndo_open = pcnet_open, 222 .ndo_stop = pcnet_close, 223 .ndo_set_config = set_config, 224 .ndo_start_xmit = ei_start_xmit, 225 .ndo_get_stats = ei_get_stats, 226 .ndo_do_ioctl = ei_ioctl, 227 .ndo_set_rx_mode = ei_set_multicast_list, 228 .ndo_tx_timeout = ei_tx_timeout, 229 .ndo_set_mac_address = eth_mac_addr, 230 .ndo_validate_addr = eth_validate_addr, 231 #ifdef CONFIG_NET_POLL_CONTROLLER 232 .ndo_poll_controller = ei_poll, 233 #endif 234 }; 235 236 static int pcnet_probe(struct pcmcia_device *link) 237 { 238 struct pcnet_dev *info; 239 struct net_device *dev; 240 241 dev_dbg(&link->dev, "pcnet_attach()\n"); 242 243 /* Create new ethernet device */ 244 dev = __alloc_ei_netdev(sizeof(struct pcnet_dev)); 245 if (!dev) return -ENOMEM; 246 info = PRIV(dev); 247 info->p_dev = link; 248 link->priv = dev; 249 250 link->config_flags |= CONF_ENABLE_IRQ | CONF_AUTO_SET_IO; 251 252 dev->netdev_ops = &pcnet_netdev_ops; 253 254 return pcnet_config(link); 255 } /* pcnet_attach */ 256 257 static void pcnet_detach(struct pcmcia_device *link) 258 { 259 struct net_device *dev = link->priv; 260 261 dev_dbg(&link->dev, "pcnet_detach\n"); 262 263 unregister_netdev(dev); 264 265 pcnet_release(link); 266 267 free_netdev(dev); 268 } /* pcnet_detach */ 269 270 /*====================================================================== 271 272 This probes for a card's hardware address, for card types that 273 encode this information in their CIS. 274 275 ======================================================================*/ 276 277 static struct hw_info *get_hwinfo(struct pcmcia_device *link) 278 { 279 struct net_device *dev = link->priv; 280 u_char __iomem *base, *virt; 281 int i, j; 282 283 /* Allocate a small memory window */ 284 link->resource[2]->flags |= WIN_DATA_WIDTH_8|WIN_MEMORY_TYPE_AM|WIN_ENABLE; 285 link->resource[2]->start = 0; link->resource[2]->end = 0; 286 i = pcmcia_request_window(link, link->resource[2], 0); 287 if (i != 0) 288 return NULL; 289 290 virt = ioremap(link->resource[2]->start, 291 resource_size(link->resource[2])); 292 if (unlikely(!virt)) { 293 pcmcia_release_window(link, link->resource[2]); 294 return NULL; 295 } 296 297 for (i = 0; i < NR_INFO; i++) { 298 pcmcia_map_mem_page(link, link->resource[2], 299 hw_info[i].offset & ~(resource_size(link->resource[2])-1)); 300 base = &virt[hw_info[i].offset & (resource_size(link->resource[2])-1)]; 301 if ((readb(base+0) == hw_info[i].a0) && 302 (readb(base+2) == hw_info[i].a1) && 303 (readb(base+4) == hw_info[i].a2)) { 304 for (j = 0; j < 6; j++) 305 dev->dev_addr[j] = readb(base + (j<<1)); 306 break; 307 } 308 } 309 310 iounmap(virt); 311 j = pcmcia_release_window(link, link->resource[2]); 312 return (i < NR_INFO) ? hw_info+i : NULL; 313 } /* get_hwinfo */ 314 315 /*====================================================================== 316 317 This probes for a card's hardware address by reading the PROM. 318 It checks the address against a list of known types, then falls 319 back to a simple NE2000 clone signature check. 320 321 ======================================================================*/ 322 323 static struct hw_info *get_prom(struct pcmcia_device *link) 324 { 325 struct net_device *dev = link->priv; 326 unsigned int ioaddr = dev->base_addr; 327 u_char prom[32]; 328 int i, j; 329 330 /* This is lifted straight from drivers/net/ethernet/8390/ne.c */ 331 struct { 332 u_char value, offset; 333 } program_seq[] = { 334 {E8390_NODMA+E8390_PAGE0+E8390_STOP, E8390_CMD}, /* Select page 0*/ 335 {0x48, EN0_DCFG}, /* Set byte-wide (0x48) access. */ 336 {0x00, EN0_RCNTLO}, /* Clear the count regs. */ 337 {0x00, EN0_RCNTHI}, 338 {0x00, EN0_IMR}, /* Mask completion irq. */ 339 {0xFF, EN0_ISR}, 340 {E8390_RXOFF, EN0_RXCR}, /* 0x20 Set to monitor */ 341 {E8390_TXOFF, EN0_TXCR}, /* 0x02 and loopback mode. */ 342 {32, EN0_RCNTLO}, 343 {0x00, EN0_RCNTHI}, 344 {0x00, EN0_RSARLO}, /* DMA starting at 0x0000. */ 345 {0x00, EN0_RSARHI}, 346 {E8390_RREAD+E8390_START, E8390_CMD}, 347 }; 348 349 pcnet_reset_8390(dev); 350 mdelay(10); 351 352 for (i = 0; i < ARRAY_SIZE(program_seq); i++) 353 outb_p(program_seq[i].value, ioaddr + program_seq[i].offset); 354 355 for (i = 0; i < 32; i++) 356 prom[i] = inb(ioaddr + PCNET_DATAPORT); 357 for (i = 0; i < NR_INFO; i++) { 358 if ((prom[0] == hw_info[i].a0) && 359 (prom[2] == hw_info[i].a1) && 360 (prom[4] == hw_info[i].a2)) 361 break; 362 } 363 if ((i < NR_INFO) || ((prom[28] == 0x57) && (prom[30] == 0x57))) { 364 for (j = 0; j < 6; j++) 365 dev->dev_addr[j] = prom[j<<1]; 366 return (i < NR_INFO) ? hw_info+i : &default_info; 367 } 368 return NULL; 369 } /* get_prom */ 370 371 /*====================================================================== 372 373 For DL10019 based cards, like the Linksys EtherFast 374 375 ======================================================================*/ 376 377 static struct hw_info *get_dl10019(struct pcmcia_device *link) 378 { 379 struct net_device *dev = link->priv; 380 int i; 381 u_char sum; 382 383 for (sum = 0, i = 0x14; i < 0x1c; i++) 384 sum += inb_p(dev->base_addr + i); 385 if (sum != 0xff) 386 return NULL; 387 for (i = 0; i < 6; i++) 388 dev->dev_addr[i] = inb_p(dev->base_addr + 0x14 + i); 389 i = inb(dev->base_addr + 0x1f); 390 return ((i == 0x91)||(i == 0x99)) ? &dl10022_info : &dl10019_info; 391 } 392 393 /*====================================================================== 394 395 For Asix AX88190 based cards 396 397 ======================================================================*/ 398 399 static struct hw_info *get_ax88190(struct pcmcia_device *link) 400 { 401 struct net_device *dev = link->priv; 402 unsigned int ioaddr = dev->base_addr; 403 int i, j; 404 405 /* Not much of a test, but the alternatives are messy */ 406 if (link->config_base != 0x03c0) 407 return NULL; 408 409 outb_p(0x01, ioaddr + EN0_DCFG); /* Set word-wide access. */ 410 outb_p(0x00, ioaddr + EN0_RSARLO); /* DMA starting at 0x0400. */ 411 outb_p(0x04, ioaddr + EN0_RSARHI); 412 outb_p(E8390_RREAD+E8390_START, ioaddr + E8390_CMD); 413 414 for (i = 0; i < 6; i += 2) { 415 j = inw(ioaddr + PCNET_DATAPORT); 416 dev->dev_addr[i] = j & 0xff; 417 dev->dev_addr[i+1] = j >> 8; 418 } 419 return NULL; 420 } 421 422 /*====================================================================== 423 424 This should be totally unnecessary... but when we can't figure 425 out the hardware address any other way, we'll let the user hard 426 wire it when the module is initialized. 427 428 ======================================================================*/ 429 430 static struct hw_info *get_hwired(struct pcmcia_device *link) 431 { 432 struct net_device *dev = link->priv; 433 int i; 434 435 for (i = 0; i < 6; i++) 436 if (hw_addr[i] != 0) break; 437 if (i == 6) 438 return NULL; 439 440 for (i = 0; i < 6; i++) 441 dev->dev_addr[i] = hw_addr[i]; 442 443 return &default_info; 444 } /* get_hwired */ 445 446 static int try_io_port(struct pcmcia_device *link) 447 { 448 int j, ret; 449 link->resource[0]->flags &= ~IO_DATA_PATH_WIDTH; 450 link->resource[1]->flags &= ~IO_DATA_PATH_WIDTH; 451 if (link->resource[0]->end == 32) { 452 link->resource[0]->flags |= IO_DATA_PATH_WIDTH_AUTO; 453 if (link->resource[1]->end > 0) { 454 /* for master/slave multifunction cards */ 455 link->resource[1]->flags |= IO_DATA_PATH_WIDTH_8; 456 } 457 } else { 458 /* This should be two 16-port windows */ 459 link->resource[0]->flags |= IO_DATA_PATH_WIDTH_8; 460 link->resource[1]->flags |= IO_DATA_PATH_WIDTH_16; 461 } 462 if (link->resource[0]->start == 0) { 463 for (j = 0; j < 0x400; j += 0x20) { 464 link->resource[0]->start = j ^ 0x300; 465 link->resource[1]->start = (j ^ 0x300) + 0x10; 466 link->io_lines = 16; 467 ret = pcmcia_request_io(link); 468 if (ret == 0) 469 return ret; 470 } 471 return ret; 472 } else { 473 return pcmcia_request_io(link); 474 } 475 } 476 477 static int pcnet_confcheck(struct pcmcia_device *p_dev, void *priv_data) 478 { 479 int *priv = priv_data; 480 int try = (*priv & 0x1); 481 482 *priv &= (p_dev->resource[2]->end >= 0x4000) ? 0x10 : ~0x10; 483 484 if (p_dev->config_index == 0) 485 return -EINVAL; 486 487 if (p_dev->resource[0]->end + p_dev->resource[1]->end < 32) 488 return -EINVAL; 489 490 if (try) 491 p_dev->io_lines = 16; 492 return try_io_port(p_dev); 493 } 494 495 static struct hw_info *pcnet_try_config(struct pcmcia_device *link, 496 int *has_shmem, int try) 497 { 498 struct net_device *dev = link->priv; 499 struct hw_info *local_hw_info; 500 struct pcnet_dev *info = PRIV(dev); 501 int priv = try; 502 int ret; 503 504 ret = pcmcia_loop_config(link, pcnet_confcheck, &priv); 505 if (ret) { 506 dev_warn(&link->dev, "no useable port range found\n"); 507 return NULL; 508 } 509 *has_shmem = (priv & 0x10); 510 511 if (!link->irq) 512 return NULL; 513 514 if (resource_size(link->resource[1]) == 8) 515 link->config_flags |= CONF_ENABLE_SPKR; 516 517 if ((link->manf_id == MANFID_IBM) && 518 (link->card_id == PRODID_IBM_HOME_AND_AWAY)) 519 link->config_index |= 0x10; 520 521 ret = pcmcia_enable_device(link); 522 if (ret) 523 return NULL; 524 525 dev->irq = link->irq; 526 dev->base_addr = link->resource[0]->start; 527 528 if (info->flags & HAS_MISC_REG) { 529 if ((if_port == 1) || (if_port == 2)) 530 dev->if_port = if_port; 531 else 532 dev_notice(&link->dev, "invalid if_port requested\n"); 533 } else 534 dev->if_port = 0; 535 536 if ((link->config_base == 0x03c0) && 537 (link->manf_id == 0x149) && (link->card_id == 0xc1ab)) { 538 dev_info(&link->dev, 539 "this is an AX88190 card - use axnet_cs instead.\n"); 540 return NULL; 541 } 542 543 local_hw_info = get_hwinfo(link); 544 if (!local_hw_info) 545 local_hw_info = get_prom(link); 546 if (!local_hw_info) 547 local_hw_info = get_dl10019(link); 548 if (!local_hw_info) 549 local_hw_info = get_ax88190(link); 550 if (!local_hw_info) 551 local_hw_info = get_hwired(link); 552 553 return local_hw_info; 554 } 555 556 static int pcnet_config(struct pcmcia_device *link) 557 { 558 struct net_device *dev = link->priv; 559 struct pcnet_dev *info = PRIV(dev); 560 int start_pg, stop_pg, cm_offset; 561 int has_shmem = 0; 562 struct hw_info *local_hw_info; 563 564 dev_dbg(&link->dev, "pcnet_config\n"); 565 566 local_hw_info = pcnet_try_config(link, &has_shmem, 0); 567 if (!local_hw_info) { 568 /* check whether forcing io_lines to 16 helps... */ 569 pcmcia_disable_device(link); 570 local_hw_info = pcnet_try_config(link, &has_shmem, 1); 571 if (local_hw_info == NULL) { 572 dev_notice(&link->dev, "unable to read hardware net" 573 " address for io base %#3lx\n", dev->base_addr); 574 goto failed; 575 } 576 } 577 578 info->flags = local_hw_info->flags; 579 /* Check for user overrides */ 580 info->flags |= (delay_output) ? DELAY_OUTPUT : 0; 581 if ((link->manf_id == MANFID_SOCKET) && 582 ((link->card_id == PRODID_SOCKET_LPE) || 583 (link->card_id == PRODID_SOCKET_LPE_CF) || 584 (link->card_id == PRODID_SOCKET_EIO))) 585 info->flags &= ~USE_BIG_BUF; 586 if (!use_big_buf) 587 info->flags &= ~USE_BIG_BUF; 588 589 if (info->flags & USE_BIG_BUF) { 590 start_pg = SOCKET_START_PG; 591 stop_pg = SOCKET_STOP_PG; 592 cm_offset = 0x10000; 593 } else { 594 start_pg = PCNET_START_PG; 595 stop_pg = PCNET_STOP_PG; 596 cm_offset = 0; 597 } 598 599 /* has_shmem is ignored if use_shmem != -1 */ 600 if ((use_shmem == 0) || (!has_shmem && (use_shmem == -1)) || 601 (setup_shmem_window(link, start_pg, stop_pg, cm_offset) != 0)) 602 setup_dma_config(link, start_pg, stop_pg); 603 604 ei_status.name = "NE2000"; 605 ei_status.word16 = 1; 606 ei_status.reset_8390 = pcnet_reset_8390; 607 608 if (info->flags & (IS_DL10019|IS_DL10022)) 609 mii_phy_probe(dev); 610 611 SET_NETDEV_DEV(dev, &link->dev); 612 613 if (register_netdev(dev) != 0) { 614 pr_notice("register_netdev() failed\n"); 615 goto failed; 616 } 617 618 if (info->flags & (IS_DL10019|IS_DL10022)) { 619 u_char id = inb(dev->base_addr + 0x1a); 620 netdev_info(dev, "NE2000 (DL100%d rev %02x): ", 621 (info->flags & IS_DL10022) ? 22 : 19, id); 622 if (info->pna_phy) 623 pr_cont("PNA, "); 624 } else { 625 netdev_info(dev, "NE2000 Compatible: "); 626 } 627 pr_cont("io %#3lx, irq %d,", dev->base_addr, dev->irq); 628 if (info->flags & USE_SHMEM) 629 pr_cont(" mem %#5lx,", dev->mem_start); 630 if (info->flags & HAS_MISC_REG) 631 pr_cont(" %s xcvr,", if_names[dev->if_port]); 632 pr_cont(" hw_addr %pM\n", dev->dev_addr); 633 return 0; 634 635 failed: 636 pcnet_release(link); 637 return -ENODEV; 638 } /* pcnet_config */ 639 640 static void pcnet_release(struct pcmcia_device *link) 641 { 642 struct pcnet_dev *info = PRIV(link->priv); 643 644 dev_dbg(&link->dev, "pcnet_release\n"); 645 646 if (info->flags & USE_SHMEM) 647 iounmap(info->base); 648 649 pcmcia_disable_device(link); 650 } 651 652 static int pcnet_suspend(struct pcmcia_device *link) 653 { 654 struct net_device *dev = link->priv; 655 656 if (link->open) 657 netif_device_detach(dev); 658 659 return 0; 660 } 661 662 static int pcnet_resume(struct pcmcia_device *link) 663 { 664 struct net_device *dev = link->priv; 665 666 if (link->open) { 667 pcnet_reset_8390(dev); 668 NS8390_init(dev, 1); 669 netif_device_attach(dev); 670 } 671 672 return 0; 673 } 674 675 676 /*====================================================================== 677 678 MII interface support for DL10019 and DL10022 based cards 679 680 On the DL10019, the MII IO direction bit is 0x10; on the DL10022 681 it is 0x20. Setting both bits seems to work on both card types. 682 683 ======================================================================*/ 684 685 #define DLINK_GPIO 0x1c 686 #define DLINK_DIAG 0x1d 687 #define DLINK_EEPROM 0x1e 688 689 #define MDIO_SHIFT_CLK 0x80 690 #define MDIO_DATA_OUT 0x40 691 #define MDIO_DIR_WRITE 0x30 692 #define MDIO_DATA_WRITE0 (MDIO_DIR_WRITE) 693 #define MDIO_DATA_WRITE1 (MDIO_DIR_WRITE | MDIO_DATA_OUT) 694 #define MDIO_DATA_READ 0x10 695 #define MDIO_MASK 0x0f 696 697 static void mdio_sync(unsigned int addr) 698 { 699 int bits, mask = inb(addr) & MDIO_MASK; 700 for (bits = 0; bits < 32; bits++) { 701 outb(mask | MDIO_DATA_WRITE1, addr); 702 outb(mask | MDIO_DATA_WRITE1 | MDIO_SHIFT_CLK, addr); 703 } 704 } 705 706 static int mdio_read(unsigned int addr, int phy_id, int loc) 707 { 708 u_int cmd = (0x06<<10)|(phy_id<<5)|loc; 709 int i, retval = 0, mask = inb(addr) & MDIO_MASK; 710 711 mdio_sync(addr); 712 for (i = 13; i >= 0; i--) { 713 int dat = (cmd&(1<<i)) ? MDIO_DATA_WRITE1 : MDIO_DATA_WRITE0; 714 outb(mask | dat, addr); 715 outb(mask | dat | MDIO_SHIFT_CLK, addr); 716 } 717 for (i = 19; i > 0; i--) { 718 outb(mask, addr); 719 retval = (retval << 1) | ((inb(addr) & MDIO_DATA_READ) != 0); 720 outb(mask | MDIO_SHIFT_CLK, addr); 721 } 722 return (retval>>1) & 0xffff; 723 } 724 725 static void mdio_write(unsigned int addr, int phy_id, int loc, int value) 726 { 727 u_int cmd = (0x05<<28)|(phy_id<<23)|(loc<<18)|(1<<17)|value; 728 int i, mask = inb(addr) & MDIO_MASK; 729 730 mdio_sync(addr); 731 for (i = 31; i >= 0; i--) { 732 int dat = (cmd&(1<<i)) ? MDIO_DATA_WRITE1 : MDIO_DATA_WRITE0; 733 outb(mask | dat, addr); 734 outb(mask | dat | MDIO_SHIFT_CLK, addr); 735 } 736 for (i = 1; i >= 0; i--) { 737 outb(mask, addr); 738 outb(mask | MDIO_SHIFT_CLK, addr); 739 } 740 } 741 742 /*====================================================================== 743 744 EEPROM access routines for DL10019 and DL10022 based cards 745 746 ======================================================================*/ 747 748 #define EE_EEP 0x40 749 #define EE_ASIC 0x10 750 #define EE_CS 0x08 751 #define EE_CK 0x04 752 #define EE_DO 0x02 753 #define EE_DI 0x01 754 #define EE_ADOT 0x01 /* DataOut for ASIC */ 755 #define EE_READ_CMD 0x06 756 757 #define DL19FDUPLX 0x0400 /* DL10019 Full duplex mode */ 758 759 static int read_eeprom(unsigned int ioaddr, int location) 760 { 761 int i, retval = 0; 762 unsigned int ee_addr = ioaddr + DLINK_EEPROM; 763 int read_cmd = location | (EE_READ_CMD << 8); 764 765 outb(0, ee_addr); 766 outb(EE_EEP|EE_CS, ee_addr); 767 768 /* Shift the read command bits out. */ 769 for (i = 10; i >= 0; i--) { 770 short dataval = (read_cmd & (1 << i)) ? EE_DO : 0; 771 outb_p(EE_EEP|EE_CS|dataval, ee_addr); 772 outb_p(EE_EEP|EE_CS|dataval|EE_CK, ee_addr); 773 } 774 outb(EE_EEP|EE_CS, ee_addr); 775 776 for (i = 16; i > 0; i--) { 777 outb_p(EE_EEP|EE_CS | EE_CK, ee_addr); 778 retval = (retval << 1) | ((inb(ee_addr) & EE_DI) ? 1 : 0); 779 outb_p(EE_EEP|EE_CS, ee_addr); 780 } 781 782 /* Terminate the EEPROM access. */ 783 outb(0, ee_addr); 784 return retval; 785 } 786 787 /* 788 The internal ASIC registers can be changed by EEPROM READ access 789 with EE_ASIC bit set. 790 In ASIC mode, EE_ADOT is used to output the data to the ASIC. 791 */ 792 793 static void write_asic(unsigned int ioaddr, int location, short asic_data) 794 { 795 int i; 796 unsigned int ee_addr = ioaddr + DLINK_EEPROM; 797 short dataval; 798 int read_cmd = location | (EE_READ_CMD << 8); 799 800 asic_data |= read_eeprom(ioaddr, location); 801 802 outb(0, ee_addr); 803 outb(EE_ASIC|EE_CS|EE_DI, ee_addr); 804 805 read_cmd = read_cmd >> 1; 806 807 /* Shift the read command bits out. */ 808 for (i = 9; i >= 0; i--) { 809 dataval = (read_cmd & (1 << i)) ? EE_DO : 0; 810 outb_p(EE_ASIC|EE_CS|EE_DI|dataval, ee_addr); 811 outb_p(EE_ASIC|EE_CS|EE_DI|dataval|EE_CK, ee_addr); 812 outb_p(EE_ASIC|EE_CS|EE_DI|dataval, ee_addr); 813 } 814 // sync 815 outb(EE_ASIC|EE_CS, ee_addr); 816 outb(EE_ASIC|EE_CS|EE_CK, ee_addr); 817 outb(EE_ASIC|EE_CS, ee_addr); 818 819 for (i = 15; i >= 0; i--) { 820 dataval = (asic_data & (1 << i)) ? EE_ADOT : 0; 821 outb_p(EE_ASIC|EE_CS|dataval, ee_addr); 822 outb_p(EE_ASIC|EE_CS|dataval|EE_CK, ee_addr); 823 outb_p(EE_ASIC|EE_CS|dataval, ee_addr); 824 } 825 826 /* Terminate the ASIC access. */ 827 outb(EE_ASIC|EE_DI, ee_addr); 828 outb(EE_ASIC|EE_DI| EE_CK, ee_addr); 829 outb(EE_ASIC|EE_DI, ee_addr); 830 831 outb(0, ee_addr); 832 } 833 834 /*====================================================================*/ 835 836 static void set_misc_reg(struct net_device *dev) 837 { 838 unsigned int nic_base = dev->base_addr; 839 struct pcnet_dev *info = PRIV(dev); 840 u_char tmp; 841 842 if (info->flags & HAS_MISC_REG) { 843 tmp = inb_p(nic_base + PCNET_MISC) & ~3; 844 if (dev->if_port == 2) 845 tmp |= 1; 846 if (info->flags & USE_BIG_BUF) 847 tmp |= 2; 848 if (info->flags & HAS_IBM_MISC) 849 tmp |= 8; 850 outb_p(tmp, nic_base + PCNET_MISC); 851 } 852 if (info->flags & IS_DL10022) { 853 if (info->flags & HAS_MII) { 854 /* Advertise 100F, 100H, 10F, 10H */ 855 mdio_write(nic_base + DLINK_GPIO, info->eth_phy, 4, 0x01e1); 856 /* Restart MII autonegotiation */ 857 mdio_write(nic_base + DLINK_GPIO, info->eth_phy, 0, 0x0000); 858 mdio_write(nic_base + DLINK_GPIO, info->eth_phy, 0, 0x1200); 859 info->mii_reset = jiffies; 860 } else { 861 outb(full_duplex ? 4 : 0, nic_base + DLINK_DIAG); 862 } 863 } else if (info->flags & IS_DL10019) { 864 /* Advertise 100F, 100H, 10F, 10H */ 865 mdio_write(nic_base + DLINK_GPIO, info->eth_phy, 4, 0x01e1); 866 /* Restart MII autonegotiation */ 867 mdio_write(nic_base + DLINK_GPIO, info->eth_phy, 0, 0x0000); 868 mdio_write(nic_base + DLINK_GPIO, info->eth_phy, 0, 0x1200); 869 } 870 } 871 872 /*====================================================================*/ 873 874 static void mii_phy_probe(struct net_device *dev) 875 { 876 struct pcnet_dev *info = PRIV(dev); 877 unsigned int mii_addr = dev->base_addr + DLINK_GPIO; 878 int i; 879 u_int tmp, phyid; 880 881 for (i = 31; i >= 0; i--) { 882 tmp = mdio_read(mii_addr, i, 1); 883 if ((tmp == 0) || (tmp == 0xffff)) 884 continue; 885 tmp = mdio_read(mii_addr, i, MII_PHYID_REG1); 886 phyid = tmp << 16; 887 phyid |= mdio_read(mii_addr, i, MII_PHYID_REG2); 888 phyid &= MII_PHYID_REV_MASK; 889 netdev_dbg(dev, "MII at %d is 0x%08x\n", i, phyid); 890 if (phyid == AM79C9XX_HOME_PHY) { 891 info->pna_phy = i; 892 } else if (phyid != AM79C9XX_ETH_PHY) { 893 info->eth_phy = i; 894 } 895 } 896 } 897 898 static int pcnet_open(struct net_device *dev) 899 { 900 int ret; 901 struct pcnet_dev *info = PRIV(dev); 902 struct pcmcia_device *link = info->p_dev; 903 unsigned int nic_base = dev->base_addr; 904 905 dev_dbg(&link->dev, "pcnet_open('%s')\n", dev->name); 906 907 if (!pcmcia_dev_present(link)) 908 return -ENODEV; 909 910 set_misc_reg(dev); 911 912 outb_p(0xFF, nic_base + EN0_ISR); /* Clear bogus intr. */ 913 ret = request_irq(dev->irq, ei_irq_wrapper, IRQF_SHARED, dev->name, dev); 914 if (ret) 915 return ret; 916 917 link->open++; 918 919 info->phy_id = info->eth_phy; 920 info->link_status = 0x00; 921 timer_setup(&info->watchdog, ei_watchdog, 0); 922 mod_timer(&info->watchdog, jiffies + HZ); 923 924 return ei_open(dev); 925 } /* pcnet_open */ 926 927 /*====================================================================*/ 928 929 static int pcnet_close(struct net_device *dev) 930 { 931 struct pcnet_dev *info = PRIV(dev); 932 struct pcmcia_device *link = info->p_dev; 933 934 dev_dbg(&link->dev, "pcnet_close('%s')\n", dev->name); 935 936 ei_close(dev); 937 free_irq(dev->irq, dev); 938 939 link->open--; 940 netif_stop_queue(dev); 941 del_timer_sync(&info->watchdog); 942 943 return 0; 944 } /* pcnet_close */ 945 946 /*====================================================================== 947 948 Hard reset the card. This used to pause for the same period that 949 a 8390 reset command required, but that shouldn't be necessary. 950 951 ======================================================================*/ 952 953 static void pcnet_reset_8390(struct net_device *dev) 954 { 955 unsigned int nic_base = dev->base_addr; 956 int i; 957 958 ei_status.txing = ei_status.dmaing = 0; 959 960 outb_p(E8390_NODMA+E8390_PAGE0+E8390_STOP, nic_base + E8390_CMD); 961 962 outb(inb(nic_base + PCNET_RESET), nic_base + PCNET_RESET); 963 964 for (i = 0; i < 100; i++) { 965 if ((inb_p(nic_base+EN0_ISR) & ENISR_RESET) != 0) 966 break; 967 udelay(100); 968 } 969 outb_p(ENISR_RESET, nic_base + EN0_ISR); /* Ack intr. */ 970 971 if (i == 100) 972 netdev_err(dev, "pcnet_reset_8390() did not complete.\n"); 973 974 set_misc_reg(dev); 975 976 } /* pcnet_reset_8390 */ 977 978 /*====================================================================*/ 979 980 static int set_config(struct net_device *dev, struct ifmap *map) 981 { 982 struct pcnet_dev *info = PRIV(dev); 983 if ((map->port != (u_char)(-1)) && (map->port != dev->if_port)) { 984 if (!(info->flags & HAS_MISC_REG)) 985 return -EOPNOTSUPP; 986 else if ((map->port < 1) || (map->port > 2)) 987 return -EINVAL; 988 dev->if_port = map->port; 989 netdev_info(dev, "switched to %s port\n", if_names[dev->if_port]); 990 NS8390_init(dev, 1); 991 } 992 return 0; 993 } 994 995 /*====================================================================*/ 996 997 static irqreturn_t ei_irq_wrapper(int irq, void *dev_id) 998 { 999 struct net_device *dev = dev_id; 1000 struct pcnet_dev *info; 1001 irqreturn_t ret = ei_interrupt(irq, dev_id); 1002 1003 if (ret == IRQ_HANDLED) { 1004 info = PRIV(dev); 1005 info->stale = 0; 1006 } 1007 return ret; 1008 } 1009 1010 static void ei_watchdog(struct timer_list *t) 1011 { 1012 struct pcnet_dev *info = from_timer(info, t, watchdog); 1013 struct net_device *dev = info->p_dev->priv; 1014 unsigned int nic_base = dev->base_addr; 1015 unsigned int mii_addr = nic_base + DLINK_GPIO; 1016 u_short link; 1017 1018 if (!netif_device_present(dev)) goto reschedule; 1019 1020 /* Check for pending interrupt with expired latency timer: with 1021 this, we can limp along even if the interrupt is blocked */ 1022 if (info->stale++ && (inb_p(nic_base + EN0_ISR) & ENISR_ALL)) { 1023 if (!info->fast_poll) 1024 netdev_info(dev, "interrupt(s) dropped!\n"); 1025 ei_irq_wrapper(dev->irq, dev); 1026 info->fast_poll = HZ; 1027 } 1028 if (info->fast_poll) { 1029 info->fast_poll--; 1030 info->watchdog.expires = jiffies + 1; 1031 add_timer(&info->watchdog); 1032 return; 1033 } 1034 1035 if (!(info->flags & HAS_MII)) 1036 goto reschedule; 1037 1038 mdio_read(mii_addr, info->phy_id, 1); 1039 link = mdio_read(mii_addr, info->phy_id, 1); 1040 if (!link || (link == 0xffff)) { 1041 if (info->eth_phy) { 1042 info->phy_id = info->eth_phy = 0; 1043 } else { 1044 netdev_info(dev, "MII is missing!\n"); 1045 info->flags &= ~HAS_MII; 1046 } 1047 goto reschedule; 1048 } 1049 1050 link &= 0x0004; 1051 if (link != info->link_status) { 1052 u_short p = mdio_read(mii_addr, info->phy_id, 5); 1053 netdev_info(dev, "%s link beat\n", link ? "found" : "lost"); 1054 if (link && (info->flags & IS_DL10022)) { 1055 /* Disable collision detection on full duplex links */ 1056 outb((p & 0x0140) ? 4 : 0, nic_base + DLINK_DIAG); 1057 } else if (link && (info->flags & IS_DL10019)) { 1058 /* Disable collision detection on full duplex links */ 1059 write_asic(dev->base_addr, 4, (p & 0x140) ? DL19FDUPLX : 0); 1060 } 1061 if (link) { 1062 if (info->phy_id == info->eth_phy) { 1063 if (p) 1064 netdev_info(dev, "autonegotiation complete: " 1065 "%sbaseT-%cD selected\n", 1066 ((p & 0x0180) ? "100" : "10"), 1067 ((p & 0x0140) ? 'F' : 'H')); 1068 else 1069 netdev_info(dev, "link partner did not autonegotiate\n"); 1070 } 1071 NS8390_init(dev, 1); 1072 } 1073 info->link_status = link; 1074 } 1075 if (info->pna_phy && time_after(jiffies, info->mii_reset + 6*HZ)) { 1076 link = mdio_read(mii_addr, info->eth_phy, 1) & 0x0004; 1077 if (((info->phy_id == info->pna_phy) && link) || 1078 ((info->phy_id != info->pna_phy) && !link)) { 1079 /* isolate this MII and try flipping to the other one */ 1080 mdio_write(mii_addr, info->phy_id, 0, 0x0400); 1081 info->phy_id ^= info->pna_phy ^ info->eth_phy; 1082 netdev_info(dev, "switched to %s transceiver\n", 1083 (info->phy_id == info->eth_phy) ? "ethernet" : "PNA"); 1084 mdio_write(mii_addr, info->phy_id, 0, 1085 (info->phy_id == info->eth_phy) ? 0x1000 : 0); 1086 info->link_status = 0; 1087 info->mii_reset = jiffies; 1088 } 1089 } 1090 1091 reschedule: 1092 info->watchdog.expires = jiffies + HZ; 1093 add_timer(&info->watchdog); 1094 } 1095 1096 /*====================================================================*/ 1097 1098 1099 static int ei_ioctl(struct net_device *dev, struct ifreq *rq, int cmd) 1100 { 1101 struct pcnet_dev *info = PRIV(dev); 1102 struct mii_ioctl_data *data = if_mii(rq); 1103 unsigned int mii_addr = dev->base_addr + DLINK_GPIO; 1104 1105 if (!(info->flags & (IS_DL10019|IS_DL10022))) 1106 return -EINVAL; 1107 1108 switch (cmd) { 1109 case SIOCGMIIPHY: 1110 data->phy_id = info->phy_id; 1111 /* fall through */ 1112 case SIOCGMIIREG: /* Read MII PHY register. */ 1113 data->val_out = mdio_read(mii_addr, data->phy_id, data->reg_num & 0x1f); 1114 return 0; 1115 case SIOCSMIIREG: /* Write MII PHY register. */ 1116 mdio_write(mii_addr, data->phy_id, data->reg_num & 0x1f, data->val_in); 1117 return 0; 1118 } 1119 return -EOPNOTSUPP; 1120 } 1121 1122 /*====================================================================*/ 1123 1124 static void dma_get_8390_hdr(struct net_device *dev, 1125 struct e8390_pkt_hdr *hdr, 1126 int ring_page) 1127 { 1128 unsigned int nic_base = dev->base_addr; 1129 1130 if (ei_status.dmaing) { 1131 netdev_err(dev, "DMAing conflict in dma_block_input." 1132 "[DMAstat:%1x][irqlock:%1x]\n", 1133 ei_status.dmaing, ei_status.irqlock); 1134 return; 1135 } 1136 1137 ei_status.dmaing |= 0x01; 1138 outb_p(E8390_NODMA+E8390_PAGE0+E8390_START, nic_base + PCNET_CMD); 1139 outb_p(sizeof(struct e8390_pkt_hdr), nic_base + EN0_RCNTLO); 1140 outb_p(0, nic_base + EN0_RCNTHI); 1141 outb_p(0, nic_base + EN0_RSARLO); /* On page boundary */ 1142 outb_p(ring_page, nic_base + EN0_RSARHI); 1143 outb_p(E8390_RREAD+E8390_START, nic_base + PCNET_CMD); 1144 1145 insw(nic_base + PCNET_DATAPORT, hdr, 1146 sizeof(struct e8390_pkt_hdr)>>1); 1147 /* Fix for big endian systems */ 1148 hdr->count = le16_to_cpu(hdr->count); 1149 1150 outb_p(ENISR_RDC, nic_base + EN0_ISR); /* Ack intr. */ 1151 ei_status.dmaing &= ~0x01; 1152 } 1153 1154 /*====================================================================*/ 1155 1156 static void dma_block_input(struct net_device *dev, int count, 1157 struct sk_buff *skb, int ring_offset) 1158 { 1159 unsigned int nic_base = dev->base_addr; 1160 int xfer_count = count; 1161 char *buf = skb->data; 1162 struct ei_device *ei_local = netdev_priv(dev); 1163 1164 if ((netif_msg_rx_status(ei_local)) && (count != 4)) 1165 netdev_dbg(dev, "[bi=%d]\n", count+4); 1166 if (ei_status.dmaing) { 1167 netdev_err(dev, "DMAing conflict in dma_block_input." 1168 "[DMAstat:%1x][irqlock:%1x]\n", 1169 ei_status.dmaing, ei_status.irqlock); 1170 return; 1171 } 1172 ei_status.dmaing |= 0x01; 1173 outb_p(E8390_NODMA+E8390_PAGE0+E8390_START, nic_base + PCNET_CMD); 1174 outb_p(count & 0xff, nic_base + EN0_RCNTLO); 1175 outb_p(count >> 8, nic_base + EN0_RCNTHI); 1176 outb_p(ring_offset & 0xff, nic_base + EN0_RSARLO); 1177 outb_p(ring_offset >> 8, nic_base + EN0_RSARHI); 1178 outb_p(E8390_RREAD+E8390_START, nic_base + PCNET_CMD); 1179 1180 insw(nic_base + PCNET_DATAPORT,buf,count>>1); 1181 if (count & 0x01) { 1182 buf[count-1] = inb(nic_base + PCNET_DATAPORT); 1183 xfer_count++; 1184 } 1185 1186 /* This was for the ALPHA version only, but enough people have been 1187 encountering problems that it is still here. */ 1188 #ifdef PCMCIA_DEBUG 1189 /* DMA termination address check... */ 1190 if (netif_msg_rx_status(ei_local)) { 1191 int addr, tries = 20; 1192 do { 1193 /* DON'T check for 'inb_p(EN0_ISR) & ENISR_RDC' here 1194 -- it's broken for Rx on some cards! */ 1195 int high = inb_p(nic_base + EN0_RSARHI); 1196 int low = inb_p(nic_base + EN0_RSARLO); 1197 addr = (high << 8) + low; 1198 if (((ring_offset + xfer_count) & 0xff) == (addr & 0xff)) 1199 break; 1200 } while (--tries > 0); 1201 if (tries <= 0) 1202 netdev_notice(dev, "RX transfer address mismatch," 1203 "%#4.4x (expected) vs. %#4.4x (actual).\n", 1204 ring_offset + xfer_count, addr); 1205 } 1206 #endif 1207 outb_p(ENISR_RDC, nic_base + EN0_ISR); /* Ack intr. */ 1208 ei_status.dmaing &= ~0x01; 1209 } /* dma_block_input */ 1210 1211 /*====================================================================*/ 1212 1213 static void dma_block_output(struct net_device *dev, int count, 1214 const u_char *buf, const int start_page) 1215 { 1216 unsigned int nic_base = dev->base_addr; 1217 struct pcnet_dev *info = PRIV(dev); 1218 #ifdef PCMCIA_DEBUG 1219 int retries = 0; 1220 struct ei_device *ei_local = netdev_priv(dev); 1221 #endif 1222 u_long dma_start; 1223 1224 #ifdef PCMCIA_DEBUG 1225 netif_dbg(ei_local, tx_queued, dev, "[bo=%d]\n", count); 1226 #endif 1227 1228 /* Round the count up for word writes. Do we need to do this? 1229 What effect will an odd byte count have on the 8390? 1230 I should check someday. */ 1231 if (count & 0x01) 1232 count++; 1233 if (ei_status.dmaing) { 1234 netdev_err(dev, "DMAing conflict in dma_block_output." 1235 "[DMAstat:%1x][irqlock:%1x]\n", 1236 ei_status.dmaing, ei_status.irqlock); 1237 return; 1238 } 1239 ei_status.dmaing |= 0x01; 1240 /* We should already be in page 0, but to be safe... */ 1241 outb_p(E8390_PAGE0+E8390_START+E8390_NODMA, nic_base+PCNET_CMD); 1242 1243 #ifdef PCMCIA_DEBUG 1244 retry: 1245 #endif 1246 1247 outb_p(ENISR_RDC, nic_base + EN0_ISR); 1248 1249 /* Now the normal output. */ 1250 outb_p(count & 0xff, nic_base + EN0_RCNTLO); 1251 outb_p(count >> 8, nic_base + EN0_RCNTHI); 1252 outb_p(0x00, nic_base + EN0_RSARLO); 1253 outb_p(start_page, nic_base + EN0_RSARHI); 1254 1255 outb_p(E8390_RWRITE+E8390_START, nic_base + PCNET_CMD); 1256 outsw(nic_base + PCNET_DATAPORT, buf, count>>1); 1257 1258 dma_start = jiffies; 1259 1260 #ifdef PCMCIA_DEBUG 1261 /* This was for the ALPHA version only, but enough people have been 1262 encountering problems that it is still here. */ 1263 /* DMA termination address check... */ 1264 if (netif_msg_tx_queued(ei_local)) { 1265 int addr, tries = 20; 1266 do { 1267 int high = inb_p(nic_base + EN0_RSARHI); 1268 int low = inb_p(nic_base + EN0_RSARLO); 1269 addr = (high << 8) + low; 1270 if ((start_page << 8) + count == addr) 1271 break; 1272 } while (--tries > 0); 1273 if (tries <= 0) { 1274 netdev_notice(dev, "Tx packet transfer address mismatch," 1275 "%#4.4x (expected) vs. %#4.4x (actual).\n", 1276 (start_page << 8) + count, addr); 1277 if (retries++ == 0) 1278 goto retry; 1279 } 1280 } 1281 #endif 1282 1283 while ((inb_p(nic_base + EN0_ISR) & ENISR_RDC) == 0) 1284 if (time_after(jiffies, dma_start + PCNET_RDC_TIMEOUT)) { 1285 netdev_warn(dev, "timeout waiting for Tx RDC.\n"); 1286 pcnet_reset_8390(dev); 1287 NS8390_init(dev, 1); 1288 break; 1289 } 1290 1291 outb_p(ENISR_RDC, nic_base + EN0_ISR); /* Ack intr. */ 1292 if (info->flags & DELAY_OUTPUT) 1293 udelay((long)delay_time); 1294 ei_status.dmaing &= ~0x01; 1295 } 1296 1297 /*====================================================================*/ 1298 1299 static int setup_dma_config(struct pcmcia_device *link, int start_pg, 1300 int stop_pg) 1301 { 1302 struct net_device *dev = link->priv; 1303 1304 ei_status.tx_start_page = start_pg; 1305 ei_status.rx_start_page = start_pg + TX_PAGES; 1306 ei_status.stop_page = stop_pg; 1307 1308 /* set up block i/o functions */ 1309 ei_status.get_8390_hdr = dma_get_8390_hdr; 1310 ei_status.block_input = dma_block_input; 1311 ei_status.block_output = dma_block_output; 1312 1313 return 0; 1314 } 1315 1316 /*====================================================================*/ 1317 1318 static void copyin(void *dest, void __iomem *src, int c) 1319 { 1320 u_short *d = dest; 1321 u_short __iomem *s = src; 1322 int odd; 1323 1324 if (c <= 0) 1325 return; 1326 odd = (c & 1); c >>= 1; 1327 1328 if (c) { 1329 do { *d++ = __raw_readw(s++); } while (--c); 1330 } 1331 /* get last byte by fetching a word and masking */ 1332 if (odd) 1333 *((u_char *)d) = readw(s) & 0xff; 1334 } 1335 1336 static void copyout(void __iomem *dest, const void *src, int c) 1337 { 1338 u_short __iomem *d = dest; 1339 const u_short *s = src; 1340 int odd; 1341 1342 if (c <= 0) 1343 return; 1344 odd = (c & 1); c >>= 1; 1345 1346 if (c) { 1347 do { __raw_writew(*s++, d++); } while (--c); 1348 } 1349 /* copy last byte doing a read-modify-write */ 1350 if (odd) 1351 writew((readw(d) & 0xff00) | *(u_char *)s, d); 1352 } 1353 1354 /*====================================================================*/ 1355 1356 static void shmem_get_8390_hdr(struct net_device *dev, 1357 struct e8390_pkt_hdr *hdr, 1358 int ring_page) 1359 { 1360 void __iomem *xfer_start = ei_status.mem + (TX_PAGES<<8) 1361 + (ring_page << 8) 1362 - (ei_status.rx_start_page << 8); 1363 1364 copyin(hdr, xfer_start, sizeof(struct e8390_pkt_hdr)); 1365 /* Fix for big endian systems */ 1366 hdr->count = le16_to_cpu(hdr->count); 1367 } 1368 1369 /*====================================================================*/ 1370 1371 static void shmem_block_input(struct net_device *dev, int count, 1372 struct sk_buff *skb, int ring_offset) 1373 { 1374 void __iomem *base = ei_status.mem; 1375 unsigned long offset = (TX_PAGES<<8) + ring_offset 1376 - (ei_status.rx_start_page << 8); 1377 char *buf = skb->data; 1378 1379 if (offset + count > ei_status.priv) { 1380 /* We must wrap the input move. */ 1381 int semi_count = ei_status.priv - offset; 1382 copyin(buf, base + offset, semi_count); 1383 buf += semi_count; 1384 offset = TX_PAGES<<8; 1385 count -= semi_count; 1386 } 1387 copyin(buf, base + offset, count); 1388 } 1389 1390 /*====================================================================*/ 1391 1392 static void shmem_block_output(struct net_device *dev, int count, 1393 const u_char *buf, const int start_page) 1394 { 1395 void __iomem *shmem = ei_status.mem + (start_page << 8); 1396 shmem -= ei_status.tx_start_page << 8; 1397 copyout(shmem, buf, count); 1398 } 1399 1400 /*====================================================================*/ 1401 1402 static int setup_shmem_window(struct pcmcia_device *link, int start_pg, 1403 int stop_pg, int cm_offset) 1404 { 1405 struct net_device *dev = link->priv; 1406 struct pcnet_dev *info = PRIV(dev); 1407 int i, window_size, offset, ret; 1408 1409 window_size = (stop_pg - start_pg) << 8; 1410 if (window_size > 32 * 1024) 1411 window_size = 32 * 1024; 1412 1413 /* Make sure it's a power of two. */ 1414 window_size = roundup_pow_of_two(window_size); 1415 1416 /* Allocate a memory window */ 1417 link->resource[3]->flags |= WIN_DATA_WIDTH_16|WIN_MEMORY_TYPE_CM|WIN_ENABLE; 1418 link->resource[3]->flags |= WIN_USE_WAIT; 1419 link->resource[3]->start = 0; link->resource[3]->end = window_size; 1420 ret = pcmcia_request_window(link, link->resource[3], mem_speed); 1421 if (ret) 1422 goto failed; 1423 1424 offset = (start_pg << 8) + cm_offset; 1425 offset -= offset % window_size; 1426 ret = pcmcia_map_mem_page(link, link->resource[3], offset); 1427 if (ret) 1428 goto failed; 1429 1430 /* Try scribbling on the buffer */ 1431 info->base = ioremap(link->resource[3]->start, 1432 resource_size(link->resource[3])); 1433 if (unlikely(!info->base)) { 1434 ret = -ENOMEM; 1435 goto failed; 1436 } 1437 1438 for (i = 0; i < (TX_PAGES<<8); i += 2) 1439 __raw_writew((i>>1), info->base+offset+i); 1440 udelay(100); 1441 for (i = 0; i < (TX_PAGES<<8); i += 2) 1442 if (__raw_readw(info->base+offset+i) != (i>>1)) break; 1443 pcnet_reset_8390(dev); 1444 if (i != (TX_PAGES<<8)) { 1445 iounmap(info->base); 1446 pcmcia_release_window(link, link->resource[3]); 1447 info->base = NULL; 1448 goto failed; 1449 } 1450 1451 ei_status.mem = info->base + offset; 1452 ei_status.priv = resource_size(link->resource[3]); 1453 dev->mem_start = (u_long)ei_status.mem; 1454 dev->mem_end = dev->mem_start + resource_size(link->resource[3]); 1455 1456 ei_status.tx_start_page = start_pg; 1457 ei_status.rx_start_page = start_pg + TX_PAGES; 1458 ei_status.stop_page = start_pg + ( 1459 (resource_size(link->resource[3]) - offset) >> 8); 1460 1461 /* set up block i/o functions */ 1462 ei_status.get_8390_hdr = shmem_get_8390_hdr; 1463 ei_status.block_input = shmem_block_input; 1464 ei_status.block_output = shmem_block_output; 1465 1466 info->flags |= USE_SHMEM; 1467 return 0; 1468 1469 failed: 1470 return 1; 1471 } 1472 1473 /*====================================================================*/ 1474 1475 static const struct pcmcia_device_id pcnet_ids[] = { 1476 PCMCIA_PFC_DEVICE_MANF_CARD(0, 0x0057, 0x0021), 1477 PCMCIA_PFC_DEVICE_MANF_CARD(0, 0x0104, 0x000a), 1478 PCMCIA_PFC_DEVICE_MANF_CARD(0, 0x0105, 0xea15), 1479 PCMCIA_PFC_DEVICE_MANF_CARD(0, 0x0143, 0x3341), 1480 PCMCIA_PFC_DEVICE_MANF_CARD(0, 0x0143, 0xc0ab), 1481 PCMCIA_PFC_DEVICE_MANF_CARD(0, 0x021b, 0x0101), 1482 PCMCIA_PFC_DEVICE_MANF_CARD(0, 0x08a1, 0xc0ab), 1483 PCMCIA_PFC_DEVICE_PROD_ID12(0, "AnyCom", "Fast Ethernet + 56K COMBO", 0x578ba6e7, 0xb0ac62c4), 1484 PCMCIA_PFC_DEVICE_PROD_ID12(0, "ATKK", "LM33-PCM-T", 0xba9eb7e2, 0x077c174e), 1485 PCMCIA_PFC_DEVICE_PROD_ID12(0, "D-Link", "DME336T", 0x1a424a1c, 0xb23897ff), 1486 PCMCIA_PFC_DEVICE_PROD_ID12(0, "Grey Cell", "GCS3000", 0x2a151fac, 0x48b932ae), 1487 PCMCIA_PFC_DEVICE_PROD_ID12(0, "Linksys", "EtherFast 10&100 + 56K PC Card (PCMLM56)", 0x0733cc81, 0xb3765033), 1488 PCMCIA_PFC_DEVICE_PROD_ID12(0, "LINKSYS", "PCMLM336", 0xf7cb0b07, 0x7a821b58), 1489 PCMCIA_PFC_DEVICE_PROD_ID12(0, "MICRO RESEARCH", "COMBO-L/M-336", 0xb2ced065, 0x3ced0555), 1490 PCMCIA_PFC_DEVICE_PROD_ID12(0, "PCMCIAs", "ComboCard", 0xdcfe12d3, 0xcd8906cc), 1491 PCMCIA_PFC_DEVICE_PROD_ID12(0, "PCMCIAs", "LanModem", 0xdcfe12d3, 0xc67c648f), 1492 PCMCIA_MFC_DEVICE_PROD_ID12(0, "IBM", "Home and Away 28.8 PC Card ", 0xb569a6e5, 0x5bd4ff2c), 1493 PCMCIA_MFC_DEVICE_PROD_ID12(0, "IBM", "Home and Away Credit Card Adapter", 0xb569a6e5, 0x4bdf15c3), 1494 PCMCIA_MFC_DEVICE_PROD_ID12(0, "IBM", "w95 Home and Away Credit Card ", 0xb569a6e5, 0xae911c15), 1495 PCMCIA_MFC_DEVICE_PROD_ID123(0, "APEX DATA", "MULTICARD", "ETHERNET-MODEM", 0x11c2da09, 0x7289dc5d, 0xaad95e1f), 1496 PCMCIA_MFC_DEVICE_PROD_ID2(0, "FAX/Modem/Ethernet Combo Card ", 0x1ed59302), 1497 PCMCIA_DEVICE_MANF_CARD(0x0057, 0x1004), 1498 PCMCIA_DEVICE_MANF_CARD(0x0104, 0x000d), 1499 PCMCIA_DEVICE_MANF_CARD(0x0104, 0x0075), 1500 PCMCIA_DEVICE_MANF_CARD(0x0104, 0x0145), 1501 PCMCIA_DEVICE_MANF_CARD(0x0149, 0x0230), 1502 PCMCIA_DEVICE_MANF_CARD(0x0149, 0x4530), 1503 PCMCIA_DEVICE_MANF_CARD(0x0149, 0xc1ab), 1504 PCMCIA_DEVICE_MANF_CARD(0x0186, 0x0110), 1505 PCMCIA_DEVICE_MANF_CARD(0x01bf, 0x8041), 1506 PCMCIA_DEVICE_MANF_CARD(0x0213, 0x2452), 1507 PCMCIA_DEVICE_MANF_CARD(0x026f, 0x0300), 1508 PCMCIA_DEVICE_MANF_CARD(0x026f, 0x0307), 1509 PCMCIA_DEVICE_MANF_CARD(0x026f, 0x030a), 1510 PCMCIA_DEVICE_MANF_CARD(0x0274, 0x1103), 1511 PCMCIA_DEVICE_MANF_CARD(0x0274, 0x1121), 1512 PCMCIA_DEVICE_MANF_CARD(0xc001, 0x0009), 1513 PCMCIA_DEVICE_PROD_ID12("2408LAN", "Ethernet", 0x352fff7f, 0x00b2e941), 1514 PCMCIA_DEVICE_PROD_ID1234("Socket", "CF 10/100 Ethernet Card", "Revision B", "05/11/06", 0xb38bcc2e, 0x4de88352, 0xeaca6c8d, 0x7e57c22e), 1515 PCMCIA_DEVICE_PROD_ID123("Cardwell", "PCMCIA", "ETHERNET", 0x9533672e, 0x281f1c5d, 0x3ff7175b), 1516 PCMCIA_DEVICE_PROD_ID123("CNet ", "CN30BC", "ETHERNET", 0x9fe55d3d, 0x85601198, 0x3ff7175b), 1517 PCMCIA_DEVICE_PROD_ID123("Digital", "Ethernet", "Adapter", 0x9999ab35, 0x00b2e941, 0x4b0d829e), 1518 PCMCIA_DEVICE_PROD_ID123("Edimax Technology Inc.", "PCMCIA", "Ethernet Card", 0x738a0019, 0x281f1c5d, 0x5e9d92c0), 1519 PCMCIA_DEVICE_PROD_ID123("EFA ", "EFA207", "ETHERNET", 0x3d294be4, 0xeb9aab6c, 0x3ff7175b), 1520 PCMCIA_DEVICE_PROD_ID123("I-O DATA", "PCLA", "ETHERNET", 0x1d55d7ec, 0xe4c64d34, 0x3ff7175b), 1521 PCMCIA_DEVICE_PROD_ID123("IO DATA", "PCLATE", "ETHERNET", 0x547e66dc, 0x6b260753, 0x3ff7175b), 1522 PCMCIA_DEVICE_PROD_ID123("KingMax Technology Inc.", "EN10-T2", "PCMCIA Ethernet Card", 0x932b7189, 0x699e4436, 0x6f6652e0), 1523 PCMCIA_DEVICE_PROD_ID123("PCMCIA", "PCMCIA-ETHERNET-CARD", "UE2216", 0x281f1c5d, 0xd4cd2f20, 0xb87add82), 1524 PCMCIA_DEVICE_PROD_ID123("PCMCIA", "PCMCIA-ETHERNET-CARD", "UE2620", 0x281f1c5d, 0xd4cd2f20, 0x7d3d83a8), 1525 PCMCIA_DEVICE_PROD_ID1("2412LAN", 0x67f236ab), 1526 PCMCIA_DEVICE_PROD_ID12("ACCTON", "EN2212", 0xdfc6b5b2, 0xcb112a11), 1527 PCMCIA_DEVICE_PROD_ID12("ACCTON", "EN2216-PCMCIA-ETHERNET", 0xdfc6b5b2, 0x5542bfff), 1528 PCMCIA_DEVICE_PROD_ID12("Allied Telesis, K.K.", "CentreCOM LA100-PCM-T V2 100/10M LAN PC Card", 0xbb7fbdd7, 0xcd91cc68), 1529 PCMCIA_DEVICE_PROD_ID12("Allied Telesis K.K.", "LA100-PCM V2", 0x36634a66, 0xc6d05997), 1530 PCMCIA_DEVICE_PROD_ID12("Allied Telesis, K.K.", "CentreCOM LA-PCM_V2", 0xbb7fBdd7, 0x28e299f8), 1531 PCMCIA_DEVICE_PROD_ID12("Allied Telesis K.K.", "LA-PCM V3", 0x36634a66, 0x62241d96), 1532 PCMCIA_DEVICE_PROD_ID12("AmbiCom", "AMB8010", 0x5070a7f9, 0x82f96e96), 1533 PCMCIA_DEVICE_PROD_ID12("AmbiCom", "AMB8610", 0x5070a7f9, 0x86741224), 1534 PCMCIA_DEVICE_PROD_ID12("AmbiCom Inc", "AMB8002", 0x93b15570, 0x75ec3efb), 1535 PCMCIA_DEVICE_PROD_ID12("AmbiCom Inc", "AMB8002T", 0x93b15570, 0x461c5247), 1536 PCMCIA_DEVICE_PROD_ID12("AmbiCom Inc", "AMB8010", 0x93b15570, 0x82f96e96), 1537 PCMCIA_DEVICE_PROD_ID12("AnyCom", "ECO Ethernet", 0x578ba6e7, 0x0a9888c1), 1538 PCMCIA_DEVICE_PROD_ID12("AnyCom", "ECO Ethernet 10/100", 0x578ba6e7, 0x939fedbd), 1539 PCMCIA_DEVICE_PROD_ID12("AROWANA", "PCMCIA Ethernet LAN Card", 0x313adbc8, 0x08d9f190), 1540 PCMCIA_DEVICE_PROD_ID12("ASANTE", "FriendlyNet PC Card", 0x3a7ade0f, 0x41c64504), 1541 PCMCIA_DEVICE_PROD_ID12("Billionton", "LNT-10TB", 0x552ab682, 0xeeb1ba6a), 1542 PCMCIA_DEVICE_PROD_ID12("CF", "10Base-Ethernet", 0x44ebf863, 0x93ae4d79), 1543 PCMCIA_DEVICE_PROD_ID12("CNet", "CN40BC Ethernet", 0xbc477dde, 0xfba775a7), 1544 PCMCIA_DEVICE_PROD_ID12("COMPU-SHACK", "BASEline PCMCIA 10 MBit Ethernetadapter", 0xfa2e424d, 0xe9190d8a), 1545 PCMCIA_DEVICE_PROD_ID12("COMPU-SHACK", "FASTline PCMCIA 10/100 Fast-Ethernet", 0xfa2e424d, 0x3953d9b9), 1546 PCMCIA_DEVICE_PROD_ID12("CONTEC", "C-NET(PC)C-10L", 0x21cab552, 0xf6f90722), 1547 PCMCIA_DEVICE_PROD_ID12("corega", "FEther PCC-TXF", 0x0a21501a, 0xa51564a2), 1548 PCMCIA_DEVICE_PROD_ID12("corega", "Ether CF-TD", 0x0a21501a, 0x6589340a), 1549 PCMCIA_DEVICE_PROD_ID12("corega K.K.", "corega Ether CF-TD LAN Card", 0x5261440f, 0x8797663b), 1550 PCMCIA_DEVICE_PROD_ID12("corega K.K.", "corega EtherII PCC-T", 0x5261440f, 0xfa9d85bd), 1551 PCMCIA_DEVICE_PROD_ID12("corega K.K.", "corega EtherII PCC-TD", 0x5261440f, 0xc49bd73d), 1552 PCMCIA_DEVICE_PROD_ID12("Corega K.K.", "corega EtherII PCC-TD", 0xd4fdcbd8, 0xc49bd73d), 1553 PCMCIA_DEVICE_PROD_ID12("corega K.K.", "corega Ether PCC-T", 0x5261440f, 0x6705fcaa), 1554 PCMCIA_DEVICE_PROD_ID12("corega K.K.", "corega Ether PCC-TD", 0x5261440f, 0x47d5ca83), 1555 PCMCIA_DEVICE_PROD_ID12("corega K.K.", "corega FastEther PCC-TX", 0x5261440f, 0x485e85d9), 1556 PCMCIA_DEVICE_PROD_ID12("Corega,K.K.", "Ethernet LAN Card", 0x110d26d9, 0x9fd2f0a2), 1557 PCMCIA_DEVICE_PROD_ID12("corega,K.K.", "Ethernet LAN Card", 0x9791a90e, 0x9fd2f0a2), 1558 PCMCIA_DEVICE_PROD_ID12("corega K.K.", "(CG-LAPCCTXD)", 0x5261440f, 0x73ec0d88), 1559 PCMCIA_DEVICE_PROD_ID12("CouplerlessPCMCIA", "100BASE", 0xee5af0ad, 0x7c2add04), 1560 PCMCIA_DEVICE_PROD_ID12("CyQ've", "ELA-010", 0x77008979, 0x9d8d445d), 1561 PCMCIA_DEVICE_PROD_ID12("CyQ've", "ELA-110E 10/100M LAN Card", 0x77008979, 0xfd184814), 1562 PCMCIA_DEVICE_PROD_ID12("DataTrek.", "NetCard ", 0x5cd66d9d, 0x84697ce0), 1563 PCMCIA_DEVICE_PROD_ID12("Dayna Communications, Inc.", "CommuniCard E", 0x0c629325, 0xb4e7dbaf), 1564 PCMCIA_DEVICE_PROD_ID12("Digicom", "Palladio LAN 10/100", 0x697403d8, 0xe160b995), 1565 PCMCIA_DEVICE_PROD_ID12("Digicom", "Palladio LAN 10/100 Dongless", 0x697403d8, 0xa6d3b233), 1566 PCMCIA_DEVICE_PROD_ID12("DIGITAL", "DEPCM-XX", 0x69616cb3, 0xe600e76e), 1567 PCMCIA_DEVICE_PROD_ID12("D-Link", "DE-650", 0x1a424a1c, 0xf28c8398), 1568 PCMCIA_DEVICE_PROD_ID12("D-Link", "DE-660", 0x1a424a1c, 0xd9a1d05b), 1569 PCMCIA_DEVICE_PROD_ID12("D-Link", "DE-660+", 0x1a424a1c, 0x50dcd0ec), 1570 PCMCIA_DEVICE_PROD_ID12("D-Link", "DFE-650", 0x1a424a1c, 0x0f0073f9), 1571 PCMCIA_DEVICE_PROD_ID12("Dual Speed", "10/100 PC Card", 0x725b842d, 0xf1efee84), 1572 PCMCIA_DEVICE_PROD_ID12("Dual Speed", "10/100 Port Attached PC Card", 0x725b842d, 0x2db1f8e9), 1573 PCMCIA_DEVICE_PROD_ID12("Dynalink", "L10BC", 0x55632fd5, 0xdc65f2b1), 1574 PCMCIA_DEVICE_PROD_ID12("DYNALINK", "L10BC", 0x6a26d1cf, 0xdc65f2b1), 1575 PCMCIA_DEVICE_PROD_ID12("DYNALINK", "L10C", 0x6a26d1cf, 0xc4f84efb), 1576 PCMCIA_DEVICE_PROD_ID12("E-CARD", "E-CARD", 0x6701da11, 0x6701da11), 1577 PCMCIA_DEVICE_PROD_ID12("EIGER Labs Inc.", "Ethernet 10BaseT card", 0x53c864c6, 0xedd059f6), 1578 PCMCIA_DEVICE_PROD_ID12("EIGER Labs Inc.", "Ethernet Combo card", 0x53c864c6, 0x929c486c), 1579 PCMCIA_DEVICE_PROD_ID12("Ethernet", "Adapter", 0x00b2e941, 0x4b0d829e), 1580 PCMCIA_DEVICE_PROD_ID12("Ethernet Adapter", "E2000 PCMCIA Ethernet", 0x96767301, 0x71fbbc61), 1581 PCMCIA_DEVICE_PROD_ID12("Ethernet PCMCIA adapter", "EP-210", 0x8dd86181, 0xf2b52517), 1582 PCMCIA_DEVICE_PROD_ID12("Fast Ethernet", "Adapter", 0xb4be14e3, 0x4b0d829e), 1583 PCMCIA_DEVICE_PROD_ID12("Grey Cell", "GCS2000", 0x2a151fac, 0xf00555cb), 1584 PCMCIA_DEVICE_PROD_ID12("Grey Cell", "GCS2220", 0x2a151fac, 0xc1b7e327), 1585 PCMCIA_DEVICE_PROD_ID12("GVC", "NIC-2000p", 0x76e171bd, 0x6eb1c947), 1586 PCMCIA_DEVICE_PROD_ID12("IBM Corp.", "Ethernet", 0xe3736c88, 0x00b2e941), 1587 PCMCIA_DEVICE_PROD_ID12("IC-CARD", "IC-CARD", 0x60cb09a6, 0x60cb09a6), 1588 PCMCIA_DEVICE_PROD_ID12("IC-CARD+", "IC-CARD+", 0x93693494, 0x93693494), 1589 PCMCIA_DEVICE_PROD_ID12("IO DATA", "PCETTX", 0x547e66dc, 0x6fc5459b), 1590 PCMCIA_DEVICE_PROD_ID12("iPort", "10/100 Ethernet Card", 0x56c538d2, 0x11b0ffc0), 1591 PCMCIA_DEVICE_PROD_ID12("KANSAI ELECTRIC CO.,LTD", "KLA-PCM/T", 0xb18dc3b4, 0xcc51a956), 1592 PCMCIA_DEVICE_PROD_ID12("KENTRONICS", "KEP-230", 0xaf8144c9, 0x868f6616), 1593 PCMCIA_DEVICE_PROD_ID12("KCI", "PE520 PCMCIA Ethernet Adapter", 0xa89b87d3, 0x1eb88e64), 1594 PCMCIA_DEVICE_PROD_ID12("KINGMAX", "EN10T2T", 0x7bcb459a, 0xa5c81fa5), 1595 PCMCIA_DEVICE_PROD_ID12("Kingston", "KNE-PC2", 0x1128e633, 0xce2a89b3), 1596 PCMCIA_DEVICE_PROD_ID12("Kingston Technology Corp.", "EtheRx PC Card Ethernet Adapter", 0x313c7be3, 0x0afb54a2), 1597 PCMCIA_DEVICE_PROD_ID12("Laneed", "LD-10/100CD", 0x1b7827b2, 0xcda71d1c), 1598 PCMCIA_DEVICE_PROD_ID12("Laneed", "LD-CDF", 0x1b7827b2, 0xfec71e40), 1599 PCMCIA_DEVICE_PROD_ID12("Laneed", "LD-CDL/T", 0x1b7827b2, 0x79fba4f7), 1600 PCMCIA_DEVICE_PROD_ID12("Laneed", "LD-CDS", 0x1b7827b2, 0x931afaab), 1601 PCMCIA_DEVICE_PROD_ID12("LEMEL", "LM-N89TX PRO", 0xbbefb52f, 0xd2897a97), 1602 PCMCIA_DEVICE_PROD_ID12("Linksys", "Combo PCMCIA EthernetCard (EC2T)", 0x0733cc81, 0x32ee8c78), 1603 PCMCIA_DEVICE_PROD_ID12("LINKSYS", "E-CARD", 0xf7cb0b07, 0x6701da11), 1604 PCMCIA_DEVICE_PROD_ID12("Linksys", "EtherFast 10/100 Integrated PC Card (PCM100)", 0x0733cc81, 0x453c3f9d), 1605 PCMCIA_DEVICE_PROD_ID12("Linksys", "EtherFast 10/100 PC Card (PCMPC100)", 0x0733cc81, 0x66c5a389), 1606 PCMCIA_DEVICE_PROD_ID12("Linksys", "EtherFast 10/100 PC Card (PCMPC100 V2)", 0x0733cc81, 0x3a3b28e9), 1607 PCMCIA_DEVICE_PROD_ID12("Linksys", "HomeLink Phoneline + 10/100 Network PC Card (PCM100H1)", 0x733cc81, 0x7a3e5c3a), 1608 PCMCIA_DEVICE_PROD_ID12("Logitec", "LPM-LN100TX", 0x88fcdeda, 0x6d772737), 1609 PCMCIA_DEVICE_PROD_ID12("Logitec", "LPM-LN100TE", 0x88fcdeda, 0x0e714bee), 1610 PCMCIA_DEVICE_PROD_ID12("Logitec", "LPM-LN20T", 0x88fcdeda, 0x81090922), 1611 PCMCIA_DEVICE_PROD_ID12("Logitec", "LPM-LN10TE", 0x88fcdeda, 0xc1e2521c), 1612 PCMCIA_DEVICE_PROD_ID12("LONGSHINE", "PCMCIA Ethernet Card", 0xf866b0b0, 0x6f6652e0), 1613 PCMCIA_DEVICE_PROD_ID12("MACNICA", "ME1-JEIDA", 0x20841b68, 0xaf8a3578), 1614 PCMCIA_DEVICE_PROD_ID12("Macsense", "MPC-10", 0xd830297f, 0xd265c307), 1615 PCMCIA_DEVICE_PROD_ID12("Matsushita Electric Industrial Co.,LTD.", "CF-VEL211", 0x44445376, 0x8ded41d4), 1616 PCMCIA_DEVICE_PROD_ID12("MAXTECH", "PCN2000", 0x78d64bc0, 0xca0ca4b8), 1617 PCMCIA_DEVICE_PROD_ID12("MELCO", "LPC2-T", 0x481e0094, 0xa2eb0cf3), 1618 PCMCIA_DEVICE_PROD_ID12("MELCO", "LPC2-TX", 0x481e0094, 0x41a6916c), 1619 PCMCIA_DEVICE_PROD_ID12("Microcom C.E.", "Travel Card LAN 10/100", 0x4b91cec7, 0xe70220d6), 1620 PCMCIA_DEVICE_PROD_ID12("Microdyne", "NE4200", 0x2e6da59b, 0x0478e472), 1621 PCMCIA_DEVICE_PROD_ID12("MIDORI ELEC.", "LT-PCMT", 0x648d55c1, 0xbde526c7), 1622 PCMCIA_DEVICE_PROD_ID12("National Semiconductor", "InfoMover 4100", 0x36e1191f, 0x60c229b9), 1623 PCMCIA_DEVICE_PROD_ID12("National Semiconductor", "InfoMover NE4100", 0x36e1191f, 0xa6617ec8), 1624 PCMCIA_DEVICE_PROD_ID12("NEC", "PC-9801N-J12", 0x18df0ba0, 0xbc912d76), 1625 PCMCIA_DEVICE_PROD_ID12("NETGEAR", "FA410TX", 0x9aa79dc3, 0x60e5bc0e), 1626 PCMCIA_DEVICE_PROD_ID12("Network Everywhere", "Fast Ethernet 10/100 PC Card", 0x820a67b6, 0x31ed1a5f), 1627 PCMCIA_DEVICE_PROD_ID12("NextCom K.K.", "Next Hawk", 0xaedaec74, 0xad050ef1), 1628 PCMCIA_DEVICE_PROD_ID12("PCMCIA", "10/100Mbps Ethernet Card", 0x281f1c5d, 0x6e41773b), 1629 PCMCIA_DEVICE_PROD_ID12("PCMCIA", "Ethernet", 0x281f1c5d, 0x00b2e941), 1630 PCMCIA_DEVICE_PROD_ID12("PCMCIA", "ETHERNET", 0x281f1c5d, 0x3ff7175b), 1631 PCMCIA_DEVICE_PROD_ID12("PCMCIA", "Ethernet 10BaseT Card", 0x281f1c5d, 0x4de2f6c8), 1632 PCMCIA_DEVICE_PROD_ID12("PCMCIA", "Ethernet Card", 0x281f1c5d, 0x5e9d92c0), 1633 PCMCIA_DEVICE_PROD_ID12("PCMCIA", "Ethernet Combo card", 0x281f1c5d, 0x929c486c), 1634 PCMCIA_DEVICE_PROD_ID12("PCMCIA", "ETHERNET V1.0", 0x281f1c5d, 0x4d8817c8), 1635 PCMCIA_DEVICE_PROD_ID12("PCMCIA", "FastEthernet", 0x281f1c5d, 0xfe871eeb), 1636 PCMCIA_DEVICE_PROD_ID12("PCMCIA", "Fast-Ethernet", 0x281f1c5d, 0x45f1f3b4), 1637 PCMCIA_DEVICE_PROD_ID12("PCMCIA", "FAST ETHERNET CARD", 0x281f1c5d, 0xec5dbca7), 1638 PCMCIA_DEVICE_PROD_ID12("PCMCIA LAN", "Ethernet", 0x7500e246, 0x00b2e941), 1639 PCMCIA_DEVICE_PROD_ID12("PCMCIA", "LNT-10TN", 0x281f1c5d, 0xe707f641), 1640 PCMCIA_DEVICE_PROD_ID12("PCMCIAs", "ComboCard", 0xdcfe12d3, 0xcd8906cc), 1641 PCMCIA_DEVICE_PROD_ID12("PCMCIA", "UE2212", 0x281f1c5d, 0xbf17199b), 1642 PCMCIA_DEVICE_PROD_ID12("PCMCIA", " Ethernet NE2000 Compatible", 0x281f1c5d, 0x42d5d7e1), 1643 PCMCIA_DEVICE_PROD_ID12("PRETEC", "Ethernet CompactLAN 10baseT 3.3V", 0xebf91155, 0x30074c80), 1644 PCMCIA_DEVICE_PROD_ID12("PRETEC", "Ethernet CompactLAN 10BaseT 3.3V", 0xebf91155, 0x7f5a4f50), 1645 PCMCIA_DEVICE_PROD_ID12("Psion Dacom", "Gold Card Ethernet", 0xf5f025c2, 0x3a30e110), 1646 PCMCIA_DEVICE_PROD_ID12("=RELIA==", "Ethernet", 0xcdd0644a, 0x00b2e941), 1647 PCMCIA_DEVICE_PROD_ID12("RIOS Systems Co.", "PC CARD3 ETHERNET", 0x7dd33481, 0x10b41826), 1648 PCMCIA_DEVICE_PROD_ID12("RP", "1625B Ethernet NE2000 Compatible", 0xe3e66e22, 0xb96150df), 1649 PCMCIA_DEVICE_PROD_ID12("RPTI", "EP400 Ethernet NE2000 Compatible", 0xdc6f88fd, 0x4a7e2ae0), 1650 PCMCIA_DEVICE_PROD_ID12("RPTI", "EP401 Ethernet NE2000 Compatible", 0xdc6f88fd, 0x4bcbd7fd), 1651 PCMCIA_DEVICE_PROD_ID12("RPTI LTD.", "EP400", 0xc53ac515, 0x81e39388), 1652 PCMCIA_DEVICE_PROD_ID12("SCM", "Ethernet Combo card", 0xbdc3b102, 0x929c486c), 1653 PCMCIA_DEVICE_PROD_ID12("Seiko Epson Corp.", "Ethernet", 0x09928730, 0x00b2e941), 1654 PCMCIA_DEVICE_PROD_ID12("SMC", "EZCard-10-PCMCIA", 0xc4f8b18b, 0xfb21d265), 1655 PCMCIA_DEVICE_PROD_ID12("Socket Communications Inc", "Socket EA PCMCIA LAN Adapter Revision D", 0xc70a4760, 0x2ade483e), 1656 PCMCIA_DEVICE_PROD_ID12("Socket Communications Inc", "Socket EA PCMCIA LAN Adapter Revision E", 0xc70a4760, 0x5dd978a8), 1657 PCMCIA_DEVICE_PROD_ID12("TDK", "LAK-CD031 for PCMCIA", 0x1eae9475, 0x0ed386fa), 1658 PCMCIA_DEVICE_PROD_ID12("Telecom Device K.K.", "SuperSocket RE450T", 0x466b05f0, 0x8b74bc4f), 1659 PCMCIA_DEVICE_PROD_ID12("Telecom Device K.K.", "SuperSocket RE550T", 0x466b05f0, 0x33c8db2a), 1660 PCMCIA_DEVICE_PROD_ID13("Hypertec", "EP401", 0x8787bec7, 0xf6e4a31e), 1661 PCMCIA_DEVICE_PROD_ID13("KingMax Technology Inc.", "Ethernet Card", 0x932b7189, 0x5e9d92c0), 1662 PCMCIA_DEVICE_PROD_ID13("LONGSHINE", "EP401", 0xf866b0b0, 0xf6e4a31e), 1663 PCMCIA_DEVICE_PROD_ID13("Xircom", "CFE-10", 0x2e3ee845, 0x22a49f89), 1664 PCMCIA_DEVICE_PROD_ID1("CyQ've 10 Base-T LAN CARD", 0x94faf360), 1665 PCMCIA_DEVICE_PROD_ID1("EP-210 PCMCIA LAN CARD.", 0x8850b4de), 1666 PCMCIA_DEVICE_PROD_ID1("ETHER-C16", 0x06a8514f), 1667 PCMCIA_DEVICE_PROD_ID1("NE2000 Compatible", 0x75b8ad5a), 1668 PCMCIA_DEVICE_PROD_ID2("EN-6200P2", 0xa996d078), 1669 /* too generic! */ 1670 /* PCMCIA_DEVICE_PROD_ID12("PCMCIA", "10/100 Ethernet Card", 0x281f1c5d, 0x11b0ffc0), */ 1671 PCMCIA_PFC_DEVICE_CIS_PROD_ID12(0, "PCMCIA", "EN2218-LAN/MODEM", 0x281f1c5d, 0x570f348e, "cis/PCMLM28.cis"), 1672 PCMCIA_PFC_DEVICE_CIS_PROD_ID12(0, "PCMCIA", "UE2218-LAN/MODEM", 0x281f1c5d, 0x6fdcacee, "cis/PCMLM28.cis"), 1673 PCMCIA_PFC_DEVICE_CIS_PROD_ID12(0, "Psion Dacom", "Gold Card V34 Ethernet", 0xf5f025c2, 0x338e8155, "cis/PCMLM28.cis"), 1674 PCMCIA_PFC_DEVICE_CIS_PROD_ID12(0, "Psion Dacom", "Gold Card V34 Ethernet GSM", 0xf5f025c2, 0x4ae85d35, "cis/PCMLM28.cis"), 1675 PCMCIA_PFC_DEVICE_CIS_PROD_ID12(0, "LINKSYS", "PCMLM28", 0xf7cb0b07, 0x66881874, "cis/PCMLM28.cis"), 1676 PCMCIA_PFC_DEVICE_CIS_PROD_ID12(0, "TOSHIBA", "Modem/LAN Card", 0xb4585a1a, 0x53f922f8, "cis/PCMLM28.cis"), 1677 PCMCIA_MFC_DEVICE_CIS_PROD_ID12(0, "DAYNA COMMUNICATIONS", "LAN AND MODEM MULTIFUNCTION", 0x8fdf8f89, 0xdd5ed9e8, "cis/DP83903.cis"), 1678 PCMCIA_MFC_DEVICE_CIS_PROD_ID4(0, "NSC MF LAN/Modem", 0x58fc6056, "cis/DP83903.cis"), 1679 PCMCIA_MFC_DEVICE_CIS_MANF_CARD(0, 0x0175, 0x0000, "cis/DP83903.cis"), 1680 PCMCIA_DEVICE_CIS_PROD_ID12("Allied Telesis,K.K", "Ethernet LAN Card", 0x2ad62f3c, 0x9fd2f0a2, "cis/LA-PCM.cis"), 1681 PCMCIA_DEVICE_CIS_PROD_ID12("KTI", "PE520 PLUS", 0xad180345, 0x9d58d392, "cis/PE520.cis"), 1682 PCMCIA_DEVICE_CIS_PROD_ID12("NDC", "Ethernet", 0x01c43ae1, 0x00b2e941, "cis/NE2K.cis"), 1683 PCMCIA_DEVICE_CIS_PROD_ID12("PMX ", "PE-200", 0x34f3f1c8, 0x10b59f8c, "cis/PE-200.cis"), 1684 PCMCIA_DEVICE_CIS_PROD_ID12("TAMARACK", "Ethernet", 0xcf434fba, 0x00b2e941, "cis/tamarack.cis"), 1685 PCMCIA_DEVICE_PROD_ID12("Ethernet", "CF Size PC Card", 0x00b2e941, 0x43ac239b), 1686 PCMCIA_DEVICE_PROD_ID123("Fast Ethernet", "CF Size PC Card", "1.0", 1687 0xb4be14e3, 0x43ac239b, 0x0877b627), 1688 PCMCIA_DEVICE_NULL 1689 }; 1690 MODULE_DEVICE_TABLE(pcmcia, pcnet_ids); 1691 MODULE_FIRMWARE("cis/PCMLM28.cis"); 1692 MODULE_FIRMWARE("cis/DP83903.cis"); 1693 MODULE_FIRMWARE("cis/LA-PCM.cis"); 1694 MODULE_FIRMWARE("cis/PE520.cis"); 1695 MODULE_FIRMWARE("cis/NE2K.cis"); 1696 MODULE_FIRMWARE("cis/PE-200.cis"); 1697 MODULE_FIRMWARE("cis/tamarack.cis"); 1698 1699 static struct pcmcia_driver pcnet_driver = { 1700 .name = "pcnet_cs", 1701 .probe = pcnet_probe, 1702 .remove = pcnet_detach, 1703 .owner = THIS_MODULE, 1704 .id_table = pcnet_ids, 1705 .suspend = pcnet_suspend, 1706 .resume = pcnet_resume, 1707 }; 1708 module_pcmcia_driver(pcnet_driver); 1709