1 /*====================================================================== 2 3 A PCMCIA ethernet driver for NS8390-based cards 4 5 This driver supports the D-Link DE-650 and Linksys EthernetCard 6 cards, the newer D-Link and Linksys combo cards, Accton EN2212 7 cards, the RPTI EP400, and the PreMax PE-200 in non-shared-memory 8 mode, and the IBM Credit Card Adapter, the NE4100, the Thomas 9 Conrad ethernet card, and the Kingston KNE-PCM/x in shared-memory 10 mode. It will also handle the Socket EA card in either mode. 11 12 Copyright (C) 1999 David A. Hinds -- dahinds@users.sourceforge.net 13 14 pcnet_cs.c 1.153 2003/11/09 18:53:09 15 16 The network driver code is based on Donald Becker's NE2000 code: 17 18 Written 1992,1993 by Donald Becker. 19 Copyright 1993 United States Government as represented by the 20 Director, National Security Agency. This software may be used and 21 distributed according to the terms of the GNU General Public License, 22 incorporated herein by reference. 23 Donald Becker may be reached at becker@scyld.com 24 25 Based also on Keith Moore's changes to Don Becker's code, for IBM 26 CCAE support. Drivers merged back together, and shared-memory 27 Socket EA support added, by Ken Raeburn, September 1995. 28 29 ======================================================================*/ 30 31 #define pr_fmt(fmt) KBUILD_MODNAME ": " fmt 32 33 #include <linux/kernel.h> 34 #include <linux/module.h> 35 #include <linux/ptrace.h> 36 #include <linux/string.h> 37 #include <linux/timer.h> 38 #include <linux/delay.h> 39 #include <linux/netdevice.h> 40 #include <linux/log2.h> 41 #include <linux/etherdevice.h> 42 #include <linux/mii.h> 43 #include "8390.h" 44 45 #include <pcmcia/cistpl.h> 46 #include <pcmcia/ciscode.h> 47 #include <pcmcia/ds.h> 48 #include <pcmcia/cisreg.h> 49 50 #include <asm/io.h> 51 #include <asm/byteorder.h> 52 #include <linux/uaccess.h> 53 54 #define PCNET_CMD 0x00 55 #define PCNET_DATAPORT 0x10 /* NatSemi-defined port window offset. */ 56 #define PCNET_RESET 0x1f /* Issue a read to reset, a write to clear. */ 57 #define PCNET_MISC 0x18 /* For IBM CCAE and Socket EA cards */ 58 59 #define PCNET_START_PG 0x40 /* First page of TX buffer */ 60 #define PCNET_STOP_PG 0x80 /* Last page +1 of RX ring */ 61 62 /* Socket EA cards have a larger packet buffer */ 63 #define SOCKET_START_PG 0x01 64 #define SOCKET_STOP_PG 0xff 65 66 #define PCNET_RDC_TIMEOUT (2*HZ/100) /* Max wait in jiffies for Tx RDC */ 67 68 static const char *if_names[] = { "auto", "10baseT", "10base2"}; 69 static u32 pcnet_msg_enable; 70 71 /*====================================================================*/ 72 73 /* Module parameters */ 74 75 MODULE_AUTHOR("David Hinds <dahinds@users.sourceforge.net>"); 76 MODULE_DESCRIPTION("NE2000 compatible PCMCIA ethernet driver"); 77 MODULE_LICENSE("GPL"); 78 79 #define INT_MODULE_PARM(n, v) static int n = v; module_param(n, int, 0) 80 81 INT_MODULE_PARM(if_port, 1); /* Transceiver type */ 82 INT_MODULE_PARM(use_big_buf, 1); /* use 64K packet buffer? */ 83 INT_MODULE_PARM(mem_speed, 0); /* shared mem speed, in ns */ 84 INT_MODULE_PARM(delay_output, 0); /* pause after xmit? */ 85 INT_MODULE_PARM(delay_time, 4); /* in usec */ 86 INT_MODULE_PARM(use_shmem, -1); /* use shared memory? */ 87 INT_MODULE_PARM(full_duplex, 0); /* full duplex? */ 88 89 /* Ugh! Let the user hardwire the hardware address for queer cards */ 90 static int hw_addr[6] = { 0, /* ... */ }; 91 module_param_array(hw_addr, int, NULL, 0); 92 93 /*====================================================================*/ 94 95 static void mii_phy_probe(struct net_device *dev); 96 static int pcnet_config(struct pcmcia_device *link); 97 static void pcnet_release(struct pcmcia_device *link); 98 static int pcnet_open(struct net_device *dev); 99 static int pcnet_close(struct net_device *dev); 100 static int ei_ioctl(struct net_device *dev, struct ifreq *rq, int cmd); 101 static irqreturn_t ei_irq_wrapper(int irq, void *dev_id); 102 static void ei_watchdog(struct timer_list *t); 103 static void pcnet_reset_8390(struct net_device *dev); 104 static int set_config(struct net_device *dev, struct ifmap *map); 105 static int setup_shmem_window(struct pcmcia_device *link, int start_pg, 106 int stop_pg, int cm_offset); 107 static int setup_dma_config(struct pcmcia_device *link, int start_pg, 108 int stop_pg); 109 110 static void pcnet_detach(struct pcmcia_device *p_dev); 111 112 /*====================================================================*/ 113 114 struct hw_info { 115 u_int offset; 116 u_char a0, a1, a2; 117 u_int flags; 118 }; 119 120 #define DELAY_OUTPUT 0x01 121 #define HAS_MISC_REG 0x02 122 #define USE_BIG_BUF 0x04 123 #define HAS_IBM_MISC 0x08 124 #define IS_DL10019 0x10 125 #define IS_DL10022 0x20 126 #define HAS_MII 0x40 127 #define USE_SHMEM 0x80 /* autodetected */ 128 129 #define AM79C9XX_HOME_PHY 0x00006B90 /* HomePNA PHY */ 130 #define AM79C9XX_ETH_PHY 0x00006B70 /* 10baseT PHY */ 131 #define MII_PHYID_REV_MASK 0xfffffff0 132 #define MII_PHYID_REG1 0x02 133 #define MII_PHYID_REG2 0x03 134 135 static struct hw_info hw_info[] = { 136 { /* Accton EN2212 */ 0x0ff0, 0x00, 0x00, 0xe8, DELAY_OUTPUT }, 137 { /* Allied Telesis LA-PCM */ 0x0ff0, 0x00, 0x00, 0xf4, 0 }, 138 { /* APEX MultiCard */ 0x03f4, 0x00, 0x20, 0xe5, 0 }, 139 { /* ASANTE FriendlyNet */ 0x4910, 0x00, 0x00, 0x94, 140 DELAY_OUTPUT | HAS_IBM_MISC }, 141 { /* Danpex EN-6200P2 */ 0x0110, 0x00, 0x40, 0xc7, 0 }, 142 { /* DataTrek NetCard */ 0x0ff0, 0x00, 0x20, 0xe8, 0 }, 143 { /* Dayna CommuniCard E */ 0x0110, 0x00, 0x80, 0x19, 0 }, 144 { /* D-Link DE-650 */ 0x0040, 0x00, 0x80, 0xc8, 0 }, 145 { /* EP-210 Ethernet */ 0x0110, 0x00, 0x40, 0x33, 0 }, 146 { /* EP4000 Ethernet */ 0x01c0, 0x00, 0x00, 0xb4, 0 }, 147 { /* Epson EEN10B */ 0x0ff0, 0x00, 0x00, 0x48, 148 HAS_MISC_REG | HAS_IBM_MISC }, 149 { /* ELECOM Laneed LD-CDWA */ 0xb8, 0x08, 0x00, 0x42, 0 }, 150 { /* Hypertec Ethernet */ 0x01c0, 0x00, 0x40, 0x4c, 0 }, 151 { /* IBM CCAE */ 0x0ff0, 0x08, 0x00, 0x5a, 152 HAS_MISC_REG | HAS_IBM_MISC }, 153 { /* IBM CCAE */ 0x0ff0, 0x00, 0x04, 0xac, 154 HAS_MISC_REG | HAS_IBM_MISC }, 155 { /* IBM CCAE */ 0x0ff0, 0x00, 0x06, 0x29, 156 HAS_MISC_REG | HAS_IBM_MISC }, 157 { /* IBM FME */ 0x0374, 0x08, 0x00, 0x5a, 158 HAS_MISC_REG | HAS_IBM_MISC }, 159 { /* IBM FME */ 0x0374, 0x00, 0x04, 0xac, 160 HAS_MISC_REG | HAS_IBM_MISC }, 161 { /* Kansai KLA-PCM/T */ 0x0ff0, 0x00, 0x60, 0x87, 162 HAS_MISC_REG | HAS_IBM_MISC }, 163 { /* NSC DP83903 */ 0x0374, 0x08, 0x00, 0x17, 164 HAS_MISC_REG | HAS_IBM_MISC }, 165 { /* NSC DP83903 */ 0x0374, 0x00, 0xc0, 0xa8, 166 HAS_MISC_REG | HAS_IBM_MISC }, 167 { /* NSC DP83903 */ 0x0374, 0x00, 0xa0, 0xb0, 168 HAS_MISC_REG | HAS_IBM_MISC }, 169 { /* NSC DP83903 */ 0x0198, 0x00, 0x20, 0xe0, 170 HAS_MISC_REG | HAS_IBM_MISC }, 171 { /* I-O DATA PCLA/T */ 0x0ff0, 0x00, 0xa0, 0xb0, 0 }, 172 { /* Katron PE-520 */ 0x0110, 0x00, 0x40, 0xf6, 0 }, 173 { /* Kingston KNE-PCM/x */ 0x0ff0, 0x00, 0xc0, 0xf0, 174 HAS_MISC_REG | HAS_IBM_MISC }, 175 { /* Kingston KNE-PCM/x */ 0x0ff0, 0xe2, 0x0c, 0x0f, 176 HAS_MISC_REG | HAS_IBM_MISC }, 177 { /* Kingston KNE-PC2 */ 0x0180, 0x00, 0xc0, 0xf0, 0 }, 178 { /* Maxtech PCN2000 */ 0x5000, 0x00, 0x00, 0xe8, 0 }, 179 { /* NDC Instant-Link */ 0x003a, 0x00, 0x80, 0xc6, 0 }, 180 { /* NE2000 Compatible */ 0x0ff0, 0x00, 0xa0, 0x0c, 0 }, 181 { /* Network General Sniffer */ 0x0ff0, 0x00, 0x00, 0x65, 182 HAS_MISC_REG | HAS_IBM_MISC }, 183 { /* Panasonic VEL211 */ 0x0ff0, 0x00, 0x80, 0x45, 184 HAS_MISC_REG | HAS_IBM_MISC }, 185 { /* PreMax PE-200 */ 0x07f0, 0x00, 0x20, 0xe0, 0 }, 186 { /* RPTI EP400 */ 0x0110, 0x00, 0x40, 0x95, 0 }, 187 { /* SCM Ethernet */ 0x0ff0, 0x00, 0x20, 0xcb, 0 }, 188 { /* Socket EA */ 0x4000, 0x00, 0xc0, 0x1b, 189 DELAY_OUTPUT | HAS_MISC_REG | USE_BIG_BUF }, 190 { /* Socket LP-E CF+ */ 0x01c0, 0x00, 0xc0, 0x1b, 0 }, 191 { /* SuperSocket RE450T */ 0x0110, 0x00, 0xe0, 0x98, 0 }, 192 { /* Volktek NPL-402CT */ 0x0060, 0x00, 0x40, 0x05, 0 }, 193 { /* NEC PC-9801N-J12 */ 0x0ff0, 0x00, 0x00, 0x4c, 0 }, 194 { /* PCMCIA Technology OEM */ 0x01c8, 0x00, 0xa0, 0x0c, 0 } 195 }; 196 197 #define NR_INFO ARRAY_SIZE(hw_info) 198 199 static struct hw_info default_info = { 0, 0, 0, 0, 0 }; 200 static struct hw_info dl10019_info = { 0, 0, 0, 0, IS_DL10019|HAS_MII }; 201 static struct hw_info dl10022_info = { 0, 0, 0, 0, IS_DL10022|HAS_MII }; 202 203 struct pcnet_dev { 204 struct pcmcia_device *p_dev; 205 u_int flags; 206 void __iomem *base; 207 struct timer_list watchdog; 208 int stale, fast_poll; 209 u_char phy_id; 210 u_char eth_phy, pna_phy; 211 u_short link_status; 212 u_long mii_reset; 213 }; 214 215 static inline struct pcnet_dev *PRIV(struct net_device *dev) 216 { 217 char *p = netdev_priv(dev); 218 return (struct pcnet_dev *)(p + sizeof(struct ei_device)); 219 } 220 221 static const struct net_device_ops pcnet_netdev_ops = { 222 .ndo_open = pcnet_open, 223 .ndo_stop = pcnet_close, 224 .ndo_set_config = set_config, 225 .ndo_start_xmit = ei_start_xmit, 226 .ndo_get_stats = ei_get_stats, 227 .ndo_do_ioctl = ei_ioctl, 228 .ndo_set_rx_mode = ei_set_multicast_list, 229 .ndo_tx_timeout = ei_tx_timeout, 230 .ndo_set_mac_address = eth_mac_addr, 231 .ndo_validate_addr = eth_validate_addr, 232 #ifdef CONFIG_NET_POLL_CONTROLLER 233 .ndo_poll_controller = ei_poll, 234 #endif 235 }; 236 237 static int pcnet_probe(struct pcmcia_device *link) 238 { 239 struct pcnet_dev *info; 240 struct net_device *dev; 241 242 dev_dbg(&link->dev, "pcnet_attach()\n"); 243 244 /* Create new ethernet device */ 245 dev = __alloc_ei_netdev(sizeof(struct pcnet_dev)); 246 if (!dev) return -ENOMEM; 247 info = PRIV(dev); 248 info->p_dev = link; 249 link->priv = dev; 250 251 link->config_flags |= CONF_ENABLE_IRQ | CONF_AUTO_SET_IO; 252 253 dev->netdev_ops = &pcnet_netdev_ops; 254 255 return pcnet_config(link); 256 } /* pcnet_attach */ 257 258 static void pcnet_detach(struct pcmcia_device *link) 259 { 260 struct net_device *dev = link->priv; 261 262 dev_dbg(&link->dev, "pcnet_detach\n"); 263 264 unregister_netdev(dev); 265 266 pcnet_release(link); 267 268 free_netdev(dev); 269 } /* pcnet_detach */ 270 271 /*====================================================================== 272 273 This probes for a card's hardware address, for card types that 274 encode this information in their CIS. 275 276 ======================================================================*/ 277 278 static struct hw_info *get_hwinfo(struct pcmcia_device *link) 279 { 280 struct net_device *dev = link->priv; 281 u_char __iomem *base, *virt; 282 int i, j; 283 284 /* Allocate a small memory window */ 285 link->resource[2]->flags |= WIN_DATA_WIDTH_8|WIN_MEMORY_TYPE_AM|WIN_ENABLE; 286 link->resource[2]->start = 0; link->resource[2]->end = 0; 287 i = pcmcia_request_window(link, link->resource[2], 0); 288 if (i != 0) 289 return NULL; 290 291 virt = ioremap(link->resource[2]->start, 292 resource_size(link->resource[2])); 293 for (i = 0; i < NR_INFO; i++) { 294 pcmcia_map_mem_page(link, link->resource[2], 295 hw_info[i].offset & ~(resource_size(link->resource[2])-1)); 296 base = &virt[hw_info[i].offset & (resource_size(link->resource[2])-1)]; 297 if ((readb(base+0) == hw_info[i].a0) && 298 (readb(base+2) == hw_info[i].a1) && 299 (readb(base+4) == hw_info[i].a2)) { 300 for (j = 0; j < 6; j++) 301 dev->dev_addr[j] = readb(base + (j<<1)); 302 break; 303 } 304 } 305 306 iounmap(virt); 307 j = pcmcia_release_window(link, link->resource[2]); 308 return (i < NR_INFO) ? hw_info+i : NULL; 309 } /* get_hwinfo */ 310 311 /*====================================================================== 312 313 This probes for a card's hardware address by reading the PROM. 314 It checks the address against a list of known types, then falls 315 back to a simple NE2000 clone signature check. 316 317 ======================================================================*/ 318 319 static struct hw_info *get_prom(struct pcmcia_device *link) 320 { 321 struct net_device *dev = link->priv; 322 unsigned int ioaddr = dev->base_addr; 323 u_char prom[32]; 324 int i, j; 325 326 /* This is lifted straight from drivers/net/ethernet/8390/ne.c */ 327 struct { 328 u_char value, offset; 329 } program_seq[] = { 330 {E8390_NODMA+E8390_PAGE0+E8390_STOP, E8390_CMD}, /* Select page 0*/ 331 {0x48, EN0_DCFG}, /* Set byte-wide (0x48) access. */ 332 {0x00, EN0_RCNTLO}, /* Clear the count regs. */ 333 {0x00, EN0_RCNTHI}, 334 {0x00, EN0_IMR}, /* Mask completion irq. */ 335 {0xFF, EN0_ISR}, 336 {E8390_RXOFF, EN0_RXCR}, /* 0x20 Set to monitor */ 337 {E8390_TXOFF, EN0_TXCR}, /* 0x02 and loopback mode. */ 338 {32, EN0_RCNTLO}, 339 {0x00, EN0_RCNTHI}, 340 {0x00, EN0_RSARLO}, /* DMA starting at 0x0000. */ 341 {0x00, EN0_RSARHI}, 342 {E8390_RREAD+E8390_START, E8390_CMD}, 343 }; 344 345 pcnet_reset_8390(dev); 346 mdelay(10); 347 348 for (i = 0; i < ARRAY_SIZE(program_seq); i++) 349 outb_p(program_seq[i].value, ioaddr + program_seq[i].offset); 350 351 for (i = 0; i < 32; i++) 352 prom[i] = inb(ioaddr + PCNET_DATAPORT); 353 for (i = 0; i < NR_INFO; i++) { 354 if ((prom[0] == hw_info[i].a0) && 355 (prom[2] == hw_info[i].a1) && 356 (prom[4] == hw_info[i].a2)) 357 break; 358 } 359 if ((i < NR_INFO) || ((prom[28] == 0x57) && (prom[30] == 0x57))) { 360 for (j = 0; j < 6; j++) 361 dev->dev_addr[j] = prom[j<<1]; 362 return (i < NR_INFO) ? hw_info+i : &default_info; 363 } 364 return NULL; 365 } /* get_prom */ 366 367 /*====================================================================== 368 369 For DL10019 based cards, like the Linksys EtherFast 370 371 ======================================================================*/ 372 373 static struct hw_info *get_dl10019(struct pcmcia_device *link) 374 { 375 struct net_device *dev = link->priv; 376 int i; 377 u_char sum; 378 379 for (sum = 0, i = 0x14; i < 0x1c; i++) 380 sum += inb_p(dev->base_addr + i); 381 if (sum != 0xff) 382 return NULL; 383 for (i = 0; i < 6; i++) 384 dev->dev_addr[i] = inb_p(dev->base_addr + 0x14 + i); 385 i = inb(dev->base_addr + 0x1f); 386 return ((i == 0x91)||(i == 0x99)) ? &dl10022_info : &dl10019_info; 387 } 388 389 /*====================================================================== 390 391 For Asix AX88190 based cards 392 393 ======================================================================*/ 394 395 static struct hw_info *get_ax88190(struct pcmcia_device *link) 396 { 397 struct net_device *dev = link->priv; 398 unsigned int ioaddr = dev->base_addr; 399 int i, j; 400 401 /* Not much of a test, but the alternatives are messy */ 402 if (link->config_base != 0x03c0) 403 return NULL; 404 405 outb_p(0x01, ioaddr + EN0_DCFG); /* Set word-wide access. */ 406 outb_p(0x00, ioaddr + EN0_RSARLO); /* DMA starting at 0x0400. */ 407 outb_p(0x04, ioaddr + EN0_RSARHI); 408 outb_p(E8390_RREAD+E8390_START, ioaddr + E8390_CMD); 409 410 for (i = 0; i < 6; i += 2) { 411 j = inw(ioaddr + PCNET_DATAPORT); 412 dev->dev_addr[i] = j & 0xff; 413 dev->dev_addr[i+1] = j >> 8; 414 } 415 return NULL; 416 } 417 418 /*====================================================================== 419 420 This should be totally unnecessary... but when we can't figure 421 out the hardware address any other way, we'll let the user hard 422 wire it when the module is initialized. 423 424 ======================================================================*/ 425 426 static struct hw_info *get_hwired(struct pcmcia_device *link) 427 { 428 struct net_device *dev = link->priv; 429 int i; 430 431 for (i = 0; i < 6; i++) 432 if (hw_addr[i] != 0) break; 433 if (i == 6) 434 return NULL; 435 436 for (i = 0; i < 6; i++) 437 dev->dev_addr[i] = hw_addr[i]; 438 439 return &default_info; 440 } /* get_hwired */ 441 442 static int try_io_port(struct pcmcia_device *link) 443 { 444 int j, ret; 445 link->resource[0]->flags &= ~IO_DATA_PATH_WIDTH; 446 link->resource[1]->flags &= ~IO_DATA_PATH_WIDTH; 447 if (link->resource[0]->end == 32) { 448 link->resource[0]->flags |= IO_DATA_PATH_WIDTH_AUTO; 449 if (link->resource[1]->end > 0) { 450 /* for master/slave multifunction cards */ 451 link->resource[1]->flags |= IO_DATA_PATH_WIDTH_8; 452 } 453 } else { 454 /* This should be two 16-port windows */ 455 link->resource[0]->flags |= IO_DATA_PATH_WIDTH_8; 456 link->resource[1]->flags |= IO_DATA_PATH_WIDTH_16; 457 } 458 if (link->resource[0]->start == 0) { 459 for (j = 0; j < 0x400; j += 0x20) { 460 link->resource[0]->start = j ^ 0x300; 461 link->resource[1]->start = (j ^ 0x300) + 0x10; 462 link->io_lines = 16; 463 ret = pcmcia_request_io(link); 464 if (ret == 0) 465 return ret; 466 } 467 return ret; 468 } else { 469 return pcmcia_request_io(link); 470 } 471 } 472 473 static int pcnet_confcheck(struct pcmcia_device *p_dev, void *priv_data) 474 { 475 int *priv = priv_data; 476 int try = (*priv & 0x1); 477 478 *priv &= (p_dev->resource[2]->end >= 0x4000) ? 0x10 : ~0x10; 479 480 if (p_dev->config_index == 0) 481 return -EINVAL; 482 483 if (p_dev->resource[0]->end + p_dev->resource[1]->end < 32) 484 return -EINVAL; 485 486 if (try) 487 p_dev->io_lines = 16; 488 return try_io_port(p_dev); 489 } 490 491 static struct hw_info *pcnet_try_config(struct pcmcia_device *link, 492 int *has_shmem, int try) 493 { 494 struct net_device *dev = link->priv; 495 struct hw_info *local_hw_info; 496 struct pcnet_dev *info = PRIV(dev); 497 int priv = try; 498 int ret; 499 500 ret = pcmcia_loop_config(link, pcnet_confcheck, &priv); 501 if (ret) { 502 dev_warn(&link->dev, "no useable port range found\n"); 503 return NULL; 504 } 505 *has_shmem = (priv & 0x10); 506 507 if (!link->irq) 508 return NULL; 509 510 if (resource_size(link->resource[1]) == 8) 511 link->config_flags |= CONF_ENABLE_SPKR; 512 513 if ((link->manf_id == MANFID_IBM) && 514 (link->card_id == PRODID_IBM_HOME_AND_AWAY)) 515 link->config_index |= 0x10; 516 517 ret = pcmcia_enable_device(link); 518 if (ret) 519 return NULL; 520 521 dev->irq = link->irq; 522 dev->base_addr = link->resource[0]->start; 523 524 if (info->flags & HAS_MISC_REG) { 525 if ((if_port == 1) || (if_port == 2)) 526 dev->if_port = if_port; 527 else 528 dev_notice(&link->dev, "invalid if_port requested\n"); 529 } else 530 dev->if_port = 0; 531 532 if ((link->config_base == 0x03c0) && 533 (link->manf_id == 0x149) && (link->card_id == 0xc1ab)) { 534 dev_info(&link->dev, 535 "this is an AX88190 card - use axnet_cs instead.\n"); 536 return NULL; 537 } 538 539 local_hw_info = get_hwinfo(link); 540 if (!local_hw_info) 541 local_hw_info = get_prom(link); 542 if (!local_hw_info) 543 local_hw_info = get_dl10019(link); 544 if (!local_hw_info) 545 local_hw_info = get_ax88190(link); 546 if (!local_hw_info) 547 local_hw_info = get_hwired(link); 548 549 return local_hw_info; 550 } 551 552 static int pcnet_config(struct pcmcia_device *link) 553 { 554 struct net_device *dev = link->priv; 555 struct pcnet_dev *info = PRIV(dev); 556 int start_pg, stop_pg, cm_offset; 557 int has_shmem = 0; 558 struct hw_info *local_hw_info; 559 struct ei_device *ei_local; 560 561 dev_dbg(&link->dev, "pcnet_config\n"); 562 563 local_hw_info = pcnet_try_config(link, &has_shmem, 0); 564 if (!local_hw_info) { 565 /* check whether forcing io_lines to 16 helps... */ 566 pcmcia_disable_device(link); 567 local_hw_info = pcnet_try_config(link, &has_shmem, 1); 568 if (local_hw_info == NULL) { 569 dev_notice(&link->dev, "unable to read hardware net" 570 " address for io base %#3lx\n", dev->base_addr); 571 goto failed; 572 } 573 } 574 575 info->flags = local_hw_info->flags; 576 /* Check for user overrides */ 577 info->flags |= (delay_output) ? DELAY_OUTPUT : 0; 578 if ((link->manf_id == MANFID_SOCKET) && 579 ((link->card_id == PRODID_SOCKET_LPE) || 580 (link->card_id == PRODID_SOCKET_LPE_CF) || 581 (link->card_id == PRODID_SOCKET_EIO))) 582 info->flags &= ~USE_BIG_BUF; 583 if (!use_big_buf) 584 info->flags &= ~USE_BIG_BUF; 585 586 if (info->flags & USE_BIG_BUF) { 587 start_pg = SOCKET_START_PG; 588 stop_pg = SOCKET_STOP_PG; 589 cm_offset = 0x10000; 590 } else { 591 start_pg = PCNET_START_PG; 592 stop_pg = PCNET_STOP_PG; 593 cm_offset = 0; 594 } 595 596 /* has_shmem is ignored if use_shmem != -1 */ 597 if ((use_shmem == 0) || (!has_shmem && (use_shmem == -1)) || 598 (setup_shmem_window(link, start_pg, stop_pg, cm_offset) != 0)) 599 setup_dma_config(link, start_pg, stop_pg); 600 601 ei_status.name = "NE2000"; 602 ei_status.word16 = 1; 603 ei_status.reset_8390 = pcnet_reset_8390; 604 605 if (info->flags & (IS_DL10019|IS_DL10022)) 606 mii_phy_probe(dev); 607 608 SET_NETDEV_DEV(dev, &link->dev); 609 ei_local = netdev_priv(dev); 610 ei_local->msg_enable = pcnet_msg_enable; 611 612 if (register_netdev(dev) != 0) { 613 pr_notice("register_netdev() failed\n"); 614 goto failed; 615 } 616 617 if (info->flags & (IS_DL10019|IS_DL10022)) { 618 u_char id = inb(dev->base_addr + 0x1a); 619 netdev_info(dev, "NE2000 (DL100%d rev %02x): ", 620 (info->flags & IS_DL10022) ? 22 : 19, id); 621 if (info->pna_phy) 622 pr_cont("PNA, "); 623 } else { 624 netdev_info(dev, "NE2000 Compatible: "); 625 } 626 pr_cont("io %#3lx, irq %d,", dev->base_addr, dev->irq); 627 if (info->flags & USE_SHMEM) 628 pr_cont(" mem %#5lx,", dev->mem_start); 629 if (info->flags & HAS_MISC_REG) 630 pr_cont(" %s xcvr,", if_names[dev->if_port]); 631 pr_cont(" hw_addr %pM\n", dev->dev_addr); 632 return 0; 633 634 failed: 635 pcnet_release(link); 636 return -ENODEV; 637 } /* pcnet_config */ 638 639 static void pcnet_release(struct pcmcia_device *link) 640 { 641 struct pcnet_dev *info = PRIV(link->priv); 642 643 dev_dbg(&link->dev, "pcnet_release\n"); 644 645 if (info->flags & USE_SHMEM) 646 iounmap(info->base); 647 648 pcmcia_disable_device(link); 649 } 650 651 static int pcnet_suspend(struct pcmcia_device *link) 652 { 653 struct net_device *dev = link->priv; 654 655 if (link->open) 656 netif_device_detach(dev); 657 658 return 0; 659 } 660 661 static int pcnet_resume(struct pcmcia_device *link) 662 { 663 struct net_device *dev = link->priv; 664 665 if (link->open) { 666 pcnet_reset_8390(dev); 667 NS8390_init(dev, 1); 668 netif_device_attach(dev); 669 } 670 671 return 0; 672 } 673 674 675 /*====================================================================== 676 677 MII interface support for DL10019 and DL10022 based cards 678 679 On the DL10019, the MII IO direction bit is 0x10; on the DL10022 680 it is 0x20. Setting both bits seems to work on both card types. 681 682 ======================================================================*/ 683 684 #define DLINK_GPIO 0x1c 685 #define DLINK_DIAG 0x1d 686 #define DLINK_EEPROM 0x1e 687 688 #define MDIO_SHIFT_CLK 0x80 689 #define MDIO_DATA_OUT 0x40 690 #define MDIO_DIR_WRITE 0x30 691 #define MDIO_DATA_WRITE0 (MDIO_DIR_WRITE) 692 #define MDIO_DATA_WRITE1 (MDIO_DIR_WRITE | MDIO_DATA_OUT) 693 #define MDIO_DATA_READ 0x10 694 #define MDIO_MASK 0x0f 695 696 static void mdio_sync(unsigned int addr) 697 { 698 int bits, mask = inb(addr) & MDIO_MASK; 699 for (bits = 0; bits < 32; bits++) { 700 outb(mask | MDIO_DATA_WRITE1, addr); 701 outb(mask | MDIO_DATA_WRITE1 | MDIO_SHIFT_CLK, addr); 702 } 703 } 704 705 static int mdio_read(unsigned int addr, int phy_id, int loc) 706 { 707 u_int cmd = (0x06<<10)|(phy_id<<5)|loc; 708 int i, retval = 0, mask = inb(addr) & MDIO_MASK; 709 710 mdio_sync(addr); 711 for (i = 13; i >= 0; i--) { 712 int dat = (cmd&(1<<i)) ? MDIO_DATA_WRITE1 : MDIO_DATA_WRITE0; 713 outb(mask | dat, addr); 714 outb(mask | dat | MDIO_SHIFT_CLK, addr); 715 } 716 for (i = 19; i > 0; i--) { 717 outb(mask, addr); 718 retval = (retval << 1) | ((inb(addr) & MDIO_DATA_READ) != 0); 719 outb(mask | MDIO_SHIFT_CLK, addr); 720 } 721 return (retval>>1) & 0xffff; 722 } 723 724 static void mdio_write(unsigned int addr, int phy_id, int loc, int value) 725 { 726 u_int cmd = (0x05<<28)|(phy_id<<23)|(loc<<18)|(1<<17)|value; 727 int i, mask = inb(addr) & MDIO_MASK; 728 729 mdio_sync(addr); 730 for (i = 31; i >= 0; i--) { 731 int dat = (cmd&(1<<i)) ? MDIO_DATA_WRITE1 : MDIO_DATA_WRITE0; 732 outb(mask | dat, addr); 733 outb(mask | dat | MDIO_SHIFT_CLK, addr); 734 } 735 for (i = 1; i >= 0; i--) { 736 outb(mask, addr); 737 outb(mask | MDIO_SHIFT_CLK, addr); 738 } 739 } 740 741 /*====================================================================== 742 743 EEPROM access routines for DL10019 and DL10022 based cards 744 745 ======================================================================*/ 746 747 #define EE_EEP 0x40 748 #define EE_ASIC 0x10 749 #define EE_CS 0x08 750 #define EE_CK 0x04 751 #define EE_DO 0x02 752 #define EE_DI 0x01 753 #define EE_ADOT 0x01 /* DataOut for ASIC */ 754 #define EE_READ_CMD 0x06 755 756 #define DL19FDUPLX 0x0400 /* DL10019 Full duplex mode */ 757 758 static int read_eeprom(unsigned int ioaddr, int location) 759 { 760 int i, retval = 0; 761 unsigned int ee_addr = ioaddr + DLINK_EEPROM; 762 int read_cmd = location | (EE_READ_CMD << 8); 763 764 outb(0, ee_addr); 765 outb(EE_EEP|EE_CS, ee_addr); 766 767 /* Shift the read command bits out. */ 768 for (i = 10; i >= 0; i--) { 769 short dataval = (read_cmd & (1 << i)) ? EE_DO : 0; 770 outb_p(EE_EEP|EE_CS|dataval, ee_addr); 771 outb_p(EE_EEP|EE_CS|dataval|EE_CK, ee_addr); 772 } 773 outb(EE_EEP|EE_CS, ee_addr); 774 775 for (i = 16; i > 0; i--) { 776 outb_p(EE_EEP|EE_CS | EE_CK, ee_addr); 777 retval = (retval << 1) | ((inb(ee_addr) & EE_DI) ? 1 : 0); 778 outb_p(EE_EEP|EE_CS, ee_addr); 779 } 780 781 /* Terminate the EEPROM access. */ 782 outb(0, ee_addr); 783 return retval; 784 } 785 786 /* 787 The internal ASIC registers can be changed by EEPROM READ access 788 with EE_ASIC bit set. 789 In ASIC mode, EE_ADOT is used to output the data to the ASIC. 790 */ 791 792 static void write_asic(unsigned int ioaddr, int location, short asic_data) 793 { 794 int i; 795 unsigned int ee_addr = ioaddr + DLINK_EEPROM; 796 short dataval; 797 int read_cmd = location | (EE_READ_CMD << 8); 798 799 asic_data |= read_eeprom(ioaddr, location); 800 801 outb(0, ee_addr); 802 outb(EE_ASIC|EE_CS|EE_DI, ee_addr); 803 804 read_cmd = read_cmd >> 1; 805 806 /* Shift the read command bits out. */ 807 for (i = 9; i >= 0; i--) { 808 dataval = (read_cmd & (1 << i)) ? EE_DO : 0; 809 outb_p(EE_ASIC|EE_CS|EE_DI|dataval, ee_addr); 810 outb_p(EE_ASIC|EE_CS|EE_DI|dataval|EE_CK, ee_addr); 811 outb_p(EE_ASIC|EE_CS|EE_DI|dataval, ee_addr); 812 } 813 // sync 814 outb(EE_ASIC|EE_CS, ee_addr); 815 outb(EE_ASIC|EE_CS|EE_CK, ee_addr); 816 outb(EE_ASIC|EE_CS, ee_addr); 817 818 for (i = 15; i >= 0; i--) { 819 dataval = (asic_data & (1 << i)) ? EE_ADOT : 0; 820 outb_p(EE_ASIC|EE_CS|dataval, ee_addr); 821 outb_p(EE_ASIC|EE_CS|dataval|EE_CK, ee_addr); 822 outb_p(EE_ASIC|EE_CS|dataval, ee_addr); 823 } 824 825 /* Terminate the ASIC access. */ 826 outb(EE_ASIC|EE_DI, ee_addr); 827 outb(EE_ASIC|EE_DI| EE_CK, ee_addr); 828 outb(EE_ASIC|EE_DI, ee_addr); 829 830 outb(0, ee_addr); 831 } 832 833 /*====================================================================*/ 834 835 static void set_misc_reg(struct net_device *dev) 836 { 837 unsigned int nic_base = dev->base_addr; 838 struct pcnet_dev *info = PRIV(dev); 839 u_char tmp; 840 841 if (info->flags & HAS_MISC_REG) { 842 tmp = inb_p(nic_base + PCNET_MISC) & ~3; 843 if (dev->if_port == 2) 844 tmp |= 1; 845 if (info->flags & USE_BIG_BUF) 846 tmp |= 2; 847 if (info->flags & HAS_IBM_MISC) 848 tmp |= 8; 849 outb_p(tmp, nic_base + PCNET_MISC); 850 } 851 if (info->flags & IS_DL10022) { 852 if (info->flags & HAS_MII) { 853 /* Advertise 100F, 100H, 10F, 10H */ 854 mdio_write(nic_base + DLINK_GPIO, info->eth_phy, 4, 0x01e1); 855 /* Restart MII autonegotiation */ 856 mdio_write(nic_base + DLINK_GPIO, info->eth_phy, 0, 0x0000); 857 mdio_write(nic_base + DLINK_GPIO, info->eth_phy, 0, 0x1200); 858 info->mii_reset = jiffies; 859 } else { 860 outb(full_duplex ? 4 : 0, nic_base + DLINK_DIAG); 861 } 862 } else if (info->flags & IS_DL10019) { 863 /* Advertise 100F, 100H, 10F, 10H */ 864 mdio_write(nic_base + DLINK_GPIO, info->eth_phy, 4, 0x01e1); 865 /* Restart MII autonegotiation */ 866 mdio_write(nic_base + DLINK_GPIO, info->eth_phy, 0, 0x0000); 867 mdio_write(nic_base + DLINK_GPIO, info->eth_phy, 0, 0x1200); 868 } 869 } 870 871 /*====================================================================*/ 872 873 static void mii_phy_probe(struct net_device *dev) 874 { 875 struct pcnet_dev *info = PRIV(dev); 876 unsigned int mii_addr = dev->base_addr + DLINK_GPIO; 877 int i; 878 u_int tmp, phyid; 879 880 for (i = 31; i >= 0; i--) { 881 tmp = mdio_read(mii_addr, i, 1); 882 if ((tmp == 0) || (tmp == 0xffff)) 883 continue; 884 tmp = mdio_read(mii_addr, i, MII_PHYID_REG1); 885 phyid = tmp << 16; 886 phyid |= mdio_read(mii_addr, i, MII_PHYID_REG2); 887 phyid &= MII_PHYID_REV_MASK; 888 netdev_dbg(dev, "MII at %d is 0x%08x\n", i, phyid); 889 if (phyid == AM79C9XX_HOME_PHY) { 890 info->pna_phy = i; 891 } else if (phyid != AM79C9XX_ETH_PHY) { 892 info->eth_phy = i; 893 } 894 } 895 } 896 897 static int pcnet_open(struct net_device *dev) 898 { 899 int ret; 900 struct pcnet_dev *info = PRIV(dev); 901 struct pcmcia_device *link = info->p_dev; 902 unsigned int nic_base = dev->base_addr; 903 904 dev_dbg(&link->dev, "pcnet_open('%s')\n", dev->name); 905 906 if (!pcmcia_dev_present(link)) 907 return -ENODEV; 908 909 set_misc_reg(dev); 910 911 outb_p(0xFF, nic_base + EN0_ISR); /* Clear bogus intr. */ 912 ret = request_irq(dev->irq, ei_irq_wrapper, IRQF_SHARED, dev->name, dev); 913 if (ret) 914 return ret; 915 916 link->open++; 917 918 info->phy_id = info->eth_phy; 919 info->link_status = 0x00; 920 timer_setup(&info->watchdog, ei_watchdog, 0); 921 mod_timer(&info->watchdog, jiffies + HZ); 922 923 return ei_open(dev); 924 } /* pcnet_open */ 925 926 /*====================================================================*/ 927 928 static int pcnet_close(struct net_device *dev) 929 { 930 struct pcnet_dev *info = PRIV(dev); 931 struct pcmcia_device *link = info->p_dev; 932 933 dev_dbg(&link->dev, "pcnet_close('%s')\n", dev->name); 934 935 ei_close(dev); 936 free_irq(dev->irq, dev); 937 938 link->open--; 939 netif_stop_queue(dev); 940 del_timer_sync(&info->watchdog); 941 942 return 0; 943 } /* pcnet_close */ 944 945 /*====================================================================== 946 947 Hard reset the card. This used to pause for the same period that 948 a 8390 reset command required, but that shouldn't be necessary. 949 950 ======================================================================*/ 951 952 static void pcnet_reset_8390(struct net_device *dev) 953 { 954 unsigned int nic_base = dev->base_addr; 955 int i; 956 957 ei_status.txing = ei_status.dmaing = 0; 958 959 outb_p(E8390_NODMA+E8390_PAGE0+E8390_STOP, nic_base + E8390_CMD); 960 961 outb(inb(nic_base + PCNET_RESET), nic_base + PCNET_RESET); 962 963 for (i = 0; i < 100; i++) { 964 if ((inb_p(nic_base+EN0_ISR) & ENISR_RESET) != 0) 965 break; 966 udelay(100); 967 } 968 outb_p(ENISR_RESET, nic_base + EN0_ISR); /* Ack intr. */ 969 970 if (i == 100) 971 netdev_err(dev, "pcnet_reset_8390() did not complete.\n"); 972 973 set_misc_reg(dev); 974 975 } /* pcnet_reset_8390 */ 976 977 /*====================================================================*/ 978 979 static int set_config(struct net_device *dev, struct ifmap *map) 980 { 981 struct pcnet_dev *info = PRIV(dev); 982 if ((map->port != (u_char)(-1)) && (map->port != dev->if_port)) { 983 if (!(info->flags & HAS_MISC_REG)) 984 return -EOPNOTSUPP; 985 else if ((map->port < 1) || (map->port > 2)) 986 return -EINVAL; 987 dev->if_port = map->port; 988 netdev_info(dev, "switched to %s port\n", if_names[dev->if_port]); 989 NS8390_init(dev, 1); 990 } 991 return 0; 992 } 993 994 /*====================================================================*/ 995 996 static irqreturn_t ei_irq_wrapper(int irq, void *dev_id) 997 { 998 struct net_device *dev = dev_id; 999 struct pcnet_dev *info; 1000 irqreturn_t ret = ei_interrupt(irq, dev_id); 1001 1002 if (ret == IRQ_HANDLED) { 1003 info = PRIV(dev); 1004 info->stale = 0; 1005 } 1006 return ret; 1007 } 1008 1009 static void ei_watchdog(struct timer_list *t) 1010 { 1011 struct pcnet_dev *info = from_timer(info, t, watchdog); 1012 struct net_device *dev = info->p_dev->priv; 1013 unsigned int nic_base = dev->base_addr; 1014 unsigned int mii_addr = nic_base + DLINK_GPIO; 1015 u_short link; 1016 1017 if (!netif_device_present(dev)) goto reschedule; 1018 1019 /* Check for pending interrupt with expired latency timer: with 1020 this, we can limp along even if the interrupt is blocked */ 1021 if (info->stale++ && (inb_p(nic_base + EN0_ISR) & ENISR_ALL)) { 1022 if (!info->fast_poll) 1023 netdev_info(dev, "interrupt(s) dropped!\n"); 1024 ei_irq_wrapper(dev->irq, dev); 1025 info->fast_poll = HZ; 1026 } 1027 if (info->fast_poll) { 1028 info->fast_poll--; 1029 info->watchdog.expires = jiffies + 1; 1030 add_timer(&info->watchdog); 1031 return; 1032 } 1033 1034 if (!(info->flags & HAS_MII)) 1035 goto reschedule; 1036 1037 mdio_read(mii_addr, info->phy_id, 1); 1038 link = mdio_read(mii_addr, info->phy_id, 1); 1039 if (!link || (link == 0xffff)) { 1040 if (info->eth_phy) { 1041 info->phy_id = info->eth_phy = 0; 1042 } else { 1043 netdev_info(dev, "MII is missing!\n"); 1044 info->flags &= ~HAS_MII; 1045 } 1046 goto reschedule; 1047 } 1048 1049 link &= 0x0004; 1050 if (link != info->link_status) { 1051 u_short p = mdio_read(mii_addr, info->phy_id, 5); 1052 netdev_info(dev, "%s link beat\n", link ? "found" : "lost"); 1053 if (link && (info->flags & IS_DL10022)) { 1054 /* Disable collision detection on full duplex links */ 1055 outb((p & 0x0140) ? 4 : 0, nic_base + DLINK_DIAG); 1056 } else if (link && (info->flags & IS_DL10019)) { 1057 /* Disable collision detection on full duplex links */ 1058 write_asic(dev->base_addr, 4, (p & 0x140) ? DL19FDUPLX : 0); 1059 } 1060 if (link) { 1061 if (info->phy_id == info->eth_phy) { 1062 if (p) 1063 netdev_info(dev, "autonegotiation complete: " 1064 "%sbaseT-%cD selected\n", 1065 ((p & 0x0180) ? "100" : "10"), 1066 ((p & 0x0140) ? 'F' : 'H')); 1067 else 1068 netdev_info(dev, "link partner did not autonegotiate\n"); 1069 } 1070 NS8390_init(dev, 1); 1071 } 1072 info->link_status = link; 1073 } 1074 if (info->pna_phy && time_after(jiffies, info->mii_reset + 6*HZ)) { 1075 link = mdio_read(mii_addr, info->eth_phy, 1) & 0x0004; 1076 if (((info->phy_id == info->pna_phy) && link) || 1077 ((info->phy_id != info->pna_phy) && !link)) { 1078 /* isolate this MII and try flipping to the other one */ 1079 mdio_write(mii_addr, info->phy_id, 0, 0x0400); 1080 info->phy_id ^= info->pna_phy ^ info->eth_phy; 1081 netdev_info(dev, "switched to %s transceiver\n", 1082 (info->phy_id == info->eth_phy) ? "ethernet" : "PNA"); 1083 mdio_write(mii_addr, info->phy_id, 0, 1084 (info->phy_id == info->eth_phy) ? 0x1000 : 0); 1085 info->link_status = 0; 1086 info->mii_reset = jiffies; 1087 } 1088 } 1089 1090 reschedule: 1091 info->watchdog.expires = jiffies + HZ; 1092 add_timer(&info->watchdog); 1093 } 1094 1095 /*====================================================================*/ 1096 1097 1098 static int ei_ioctl(struct net_device *dev, struct ifreq *rq, int cmd) 1099 { 1100 struct pcnet_dev *info = PRIV(dev); 1101 struct mii_ioctl_data *data = if_mii(rq); 1102 unsigned int mii_addr = dev->base_addr + DLINK_GPIO; 1103 1104 if (!(info->flags & (IS_DL10019|IS_DL10022))) 1105 return -EINVAL; 1106 1107 switch (cmd) { 1108 case SIOCGMIIPHY: 1109 data->phy_id = info->phy_id; 1110 /* fall through */ 1111 case SIOCGMIIREG: /* Read MII PHY register. */ 1112 data->val_out = mdio_read(mii_addr, data->phy_id, data->reg_num & 0x1f); 1113 return 0; 1114 case SIOCSMIIREG: /* Write MII PHY register. */ 1115 mdio_write(mii_addr, data->phy_id, data->reg_num & 0x1f, data->val_in); 1116 return 0; 1117 } 1118 return -EOPNOTSUPP; 1119 } 1120 1121 /*====================================================================*/ 1122 1123 static void dma_get_8390_hdr(struct net_device *dev, 1124 struct e8390_pkt_hdr *hdr, 1125 int ring_page) 1126 { 1127 unsigned int nic_base = dev->base_addr; 1128 1129 if (ei_status.dmaing) { 1130 netdev_err(dev, "DMAing conflict in dma_block_input." 1131 "[DMAstat:%1x][irqlock:%1x]\n", 1132 ei_status.dmaing, ei_status.irqlock); 1133 return; 1134 } 1135 1136 ei_status.dmaing |= 0x01; 1137 outb_p(E8390_NODMA+E8390_PAGE0+E8390_START, nic_base + PCNET_CMD); 1138 outb_p(sizeof(struct e8390_pkt_hdr), nic_base + EN0_RCNTLO); 1139 outb_p(0, nic_base + EN0_RCNTHI); 1140 outb_p(0, nic_base + EN0_RSARLO); /* On page boundary */ 1141 outb_p(ring_page, nic_base + EN0_RSARHI); 1142 outb_p(E8390_RREAD+E8390_START, nic_base + PCNET_CMD); 1143 1144 insw(nic_base + PCNET_DATAPORT, hdr, 1145 sizeof(struct e8390_pkt_hdr)>>1); 1146 /* Fix for big endian systems */ 1147 hdr->count = le16_to_cpu(hdr->count); 1148 1149 outb_p(ENISR_RDC, nic_base + EN0_ISR); /* Ack intr. */ 1150 ei_status.dmaing &= ~0x01; 1151 } 1152 1153 /*====================================================================*/ 1154 1155 static void dma_block_input(struct net_device *dev, int count, 1156 struct sk_buff *skb, int ring_offset) 1157 { 1158 unsigned int nic_base = dev->base_addr; 1159 int xfer_count = count; 1160 char *buf = skb->data; 1161 struct ei_device *ei_local = netdev_priv(dev); 1162 1163 if ((netif_msg_rx_status(ei_local)) && (count != 4)) 1164 netdev_dbg(dev, "[bi=%d]\n", count+4); 1165 if (ei_status.dmaing) { 1166 netdev_err(dev, "DMAing conflict in dma_block_input." 1167 "[DMAstat:%1x][irqlock:%1x]\n", 1168 ei_status.dmaing, ei_status.irqlock); 1169 return; 1170 } 1171 ei_status.dmaing |= 0x01; 1172 outb_p(E8390_NODMA+E8390_PAGE0+E8390_START, nic_base + PCNET_CMD); 1173 outb_p(count & 0xff, nic_base + EN0_RCNTLO); 1174 outb_p(count >> 8, nic_base + EN0_RCNTHI); 1175 outb_p(ring_offset & 0xff, nic_base + EN0_RSARLO); 1176 outb_p(ring_offset >> 8, nic_base + EN0_RSARHI); 1177 outb_p(E8390_RREAD+E8390_START, nic_base + PCNET_CMD); 1178 1179 insw(nic_base + PCNET_DATAPORT,buf,count>>1); 1180 if (count & 0x01) 1181 buf[count-1] = inb(nic_base + PCNET_DATAPORT), xfer_count++; 1182 1183 /* This was for the ALPHA version only, but enough people have been 1184 encountering problems that it is still here. */ 1185 #ifdef PCMCIA_DEBUG 1186 /* DMA termination address check... */ 1187 if (netif_msg_rx_status(ei_local)) { 1188 int addr, tries = 20; 1189 do { 1190 /* DON'T check for 'inb_p(EN0_ISR) & ENISR_RDC' here 1191 -- it's broken for Rx on some cards! */ 1192 int high = inb_p(nic_base + EN0_RSARHI); 1193 int low = inb_p(nic_base + EN0_RSARLO); 1194 addr = (high << 8) + low; 1195 if (((ring_offset + xfer_count) & 0xff) == (addr & 0xff)) 1196 break; 1197 } while (--tries > 0); 1198 if (tries <= 0) 1199 netdev_notice(dev, "RX transfer address mismatch," 1200 "%#4.4x (expected) vs. %#4.4x (actual).\n", 1201 ring_offset + xfer_count, addr); 1202 } 1203 #endif 1204 outb_p(ENISR_RDC, nic_base + EN0_ISR); /* Ack intr. */ 1205 ei_status.dmaing &= ~0x01; 1206 } /* dma_block_input */ 1207 1208 /*====================================================================*/ 1209 1210 static void dma_block_output(struct net_device *dev, int count, 1211 const u_char *buf, const int start_page) 1212 { 1213 unsigned int nic_base = dev->base_addr; 1214 struct pcnet_dev *info = PRIV(dev); 1215 #ifdef PCMCIA_DEBUG 1216 int retries = 0; 1217 struct ei_device *ei_local = netdev_priv(dev); 1218 #endif 1219 u_long dma_start; 1220 1221 #ifdef PCMCIA_DEBUG 1222 netif_dbg(ei_local, tx_queued, dev, "[bo=%d]\n", count); 1223 #endif 1224 1225 /* Round the count up for word writes. Do we need to do this? 1226 What effect will an odd byte count have on the 8390? 1227 I should check someday. */ 1228 if (count & 0x01) 1229 count++; 1230 if (ei_status.dmaing) { 1231 netdev_err(dev, "DMAing conflict in dma_block_output." 1232 "[DMAstat:%1x][irqlock:%1x]\n", 1233 ei_status.dmaing, ei_status.irqlock); 1234 return; 1235 } 1236 ei_status.dmaing |= 0x01; 1237 /* We should already be in page 0, but to be safe... */ 1238 outb_p(E8390_PAGE0+E8390_START+E8390_NODMA, nic_base+PCNET_CMD); 1239 1240 #ifdef PCMCIA_DEBUG 1241 retry: 1242 #endif 1243 1244 outb_p(ENISR_RDC, nic_base + EN0_ISR); 1245 1246 /* Now the normal output. */ 1247 outb_p(count & 0xff, nic_base + EN0_RCNTLO); 1248 outb_p(count >> 8, nic_base + EN0_RCNTHI); 1249 outb_p(0x00, nic_base + EN0_RSARLO); 1250 outb_p(start_page, nic_base + EN0_RSARHI); 1251 1252 outb_p(E8390_RWRITE+E8390_START, nic_base + PCNET_CMD); 1253 outsw(nic_base + PCNET_DATAPORT, buf, count>>1); 1254 1255 dma_start = jiffies; 1256 1257 #ifdef PCMCIA_DEBUG 1258 /* This was for the ALPHA version only, but enough people have been 1259 encountering problems that it is still here. */ 1260 /* DMA termination address check... */ 1261 if (netif_msg_tx_queued(ei_local)) { 1262 int addr, tries = 20; 1263 do { 1264 int high = inb_p(nic_base + EN0_RSARHI); 1265 int low = inb_p(nic_base + EN0_RSARLO); 1266 addr = (high << 8) + low; 1267 if ((start_page << 8) + count == addr) 1268 break; 1269 } while (--tries > 0); 1270 if (tries <= 0) { 1271 netdev_notice(dev, "Tx packet transfer address mismatch," 1272 "%#4.4x (expected) vs. %#4.4x (actual).\n", 1273 (start_page << 8) + count, addr); 1274 if (retries++ == 0) 1275 goto retry; 1276 } 1277 } 1278 #endif 1279 1280 while ((inb_p(nic_base + EN0_ISR) & ENISR_RDC) == 0) 1281 if (time_after(jiffies, dma_start + PCNET_RDC_TIMEOUT)) { 1282 netdev_warn(dev, "timeout waiting for Tx RDC.\n"); 1283 pcnet_reset_8390(dev); 1284 NS8390_init(dev, 1); 1285 break; 1286 } 1287 1288 outb_p(ENISR_RDC, nic_base + EN0_ISR); /* Ack intr. */ 1289 if (info->flags & DELAY_OUTPUT) 1290 udelay((long)delay_time); 1291 ei_status.dmaing &= ~0x01; 1292 } 1293 1294 /*====================================================================*/ 1295 1296 static int setup_dma_config(struct pcmcia_device *link, int start_pg, 1297 int stop_pg) 1298 { 1299 struct net_device *dev = link->priv; 1300 1301 ei_status.tx_start_page = start_pg; 1302 ei_status.rx_start_page = start_pg + TX_PAGES; 1303 ei_status.stop_page = stop_pg; 1304 1305 /* set up block i/o functions */ 1306 ei_status.get_8390_hdr = dma_get_8390_hdr; 1307 ei_status.block_input = dma_block_input; 1308 ei_status.block_output = dma_block_output; 1309 1310 return 0; 1311 } 1312 1313 /*====================================================================*/ 1314 1315 static void copyin(void *dest, void __iomem *src, int c) 1316 { 1317 u_short *d = dest; 1318 u_short __iomem *s = src; 1319 int odd; 1320 1321 if (c <= 0) 1322 return; 1323 odd = (c & 1); c >>= 1; 1324 1325 if (c) { 1326 do { *d++ = __raw_readw(s++); } while (--c); 1327 } 1328 /* get last byte by fetching a word and masking */ 1329 if (odd) 1330 *((u_char *)d) = readw(s) & 0xff; 1331 } 1332 1333 static void copyout(void __iomem *dest, const void *src, int c) 1334 { 1335 u_short __iomem *d = dest; 1336 const u_short *s = src; 1337 int odd; 1338 1339 if (c <= 0) 1340 return; 1341 odd = (c & 1); c >>= 1; 1342 1343 if (c) { 1344 do { __raw_writew(*s++, d++); } while (--c); 1345 } 1346 /* copy last byte doing a read-modify-write */ 1347 if (odd) 1348 writew((readw(d) & 0xff00) | *(u_char *)s, d); 1349 } 1350 1351 /*====================================================================*/ 1352 1353 static void shmem_get_8390_hdr(struct net_device *dev, 1354 struct e8390_pkt_hdr *hdr, 1355 int ring_page) 1356 { 1357 void __iomem *xfer_start = ei_status.mem + (TX_PAGES<<8) 1358 + (ring_page << 8) 1359 - (ei_status.rx_start_page << 8); 1360 1361 copyin(hdr, xfer_start, sizeof(struct e8390_pkt_hdr)); 1362 /* Fix for big endian systems */ 1363 hdr->count = le16_to_cpu(hdr->count); 1364 } 1365 1366 /*====================================================================*/ 1367 1368 static void shmem_block_input(struct net_device *dev, int count, 1369 struct sk_buff *skb, int ring_offset) 1370 { 1371 void __iomem *base = ei_status.mem; 1372 unsigned long offset = (TX_PAGES<<8) + ring_offset 1373 - (ei_status.rx_start_page << 8); 1374 char *buf = skb->data; 1375 1376 if (offset + count > ei_status.priv) { 1377 /* We must wrap the input move. */ 1378 int semi_count = ei_status.priv - offset; 1379 copyin(buf, base + offset, semi_count); 1380 buf += semi_count; 1381 offset = TX_PAGES<<8; 1382 count -= semi_count; 1383 } 1384 copyin(buf, base + offset, count); 1385 } 1386 1387 /*====================================================================*/ 1388 1389 static void shmem_block_output(struct net_device *dev, int count, 1390 const u_char *buf, const int start_page) 1391 { 1392 void __iomem *shmem = ei_status.mem + (start_page << 8); 1393 shmem -= ei_status.tx_start_page << 8; 1394 copyout(shmem, buf, count); 1395 } 1396 1397 /*====================================================================*/ 1398 1399 static int setup_shmem_window(struct pcmcia_device *link, int start_pg, 1400 int stop_pg, int cm_offset) 1401 { 1402 struct net_device *dev = link->priv; 1403 struct pcnet_dev *info = PRIV(dev); 1404 int i, window_size, offset, ret; 1405 1406 window_size = (stop_pg - start_pg) << 8; 1407 if (window_size > 32 * 1024) 1408 window_size = 32 * 1024; 1409 1410 /* Make sure it's a power of two. */ 1411 window_size = roundup_pow_of_two(window_size); 1412 1413 /* Allocate a memory window */ 1414 link->resource[3]->flags |= WIN_DATA_WIDTH_16|WIN_MEMORY_TYPE_CM|WIN_ENABLE; 1415 link->resource[3]->flags |= WIN_USE_WAIT; 1416 link->resource[3]->start = 0; link->resource[3]->end = window_size; 1417 ret = pcmcia_request_window(link, link->resource[3], mem_speed); 1418 if (ret) 1419 goto failed; 1420 1421 offset = (start_pg << 8) + cm_offset; 1422 offset -= offset % window_size; 1423 ret = pcmcia_map_mem_page(link, link->resource[3], offset); 1424 if (ret) 1425 goto failed; 1426 1427 /* Try scribbling on the buffer */ 1428 info->base = ioremap(link->resource[3]->start, 1429 resource_size(link->resource[3])); 1430 for (i = 0; i < (TX_PAGES<<8); i += 2) 1431 __raw_writew((i>>1), info->base+offset+i); 1432 udelay(100); 1433 for (i = 0; i < (TX_PAGES<<8); i += 2) 1434 if (__raw_readw(info->base+offset+i) != (i>>1)) break; 1435 pcnet_reset_8390(dev); 1436 if (i != (TX_PAGES<<8)) { 1437 iounmap(info->base); 1438 pcmcia_release_window(link, link->resource[3]); 1439 info->base = NULL; 1440 goto failed; 1441 } 1442 1443 ei_status.mem = info->base + offset; 1444 ei_status.priv = resource_size(link->resource[3]); 1445 dev->mem_start = (u_long)ei_status.mem; 1446 dev->mem_end = dev->mem_start + resource_size(link->resource[3]); 1447 1448 ei_status.tx_start_page = start_pg; 1449 ei_status.rx_start_page = start_pg + TX_PAGES; 1450 ei_status.stop_page = start_pg + ( 1451 (resource_size(link->resource[3]) - offset) >> 8); 1452 1453 /* set up block i/o functions */ 1454 ei_status.get_8390_hdr = shmem_get_8390_hdr; 1455 ei_status.block_input = shmem_block_input; 1456 ei_status.block_output = shmem_block_output; 1457 1458 info->flags |= USE_SHMEM; 1459 return 0; 1460 1461 failed: 1462 return 1; 1463 } 1464 1465 /*====================================================================*/ 1466 1467 static const struct pcmcia_device_id pcnet_ids[] = { 1468 PCMCIA_PFC_DEVICE_MANF_CARD(0, 0x0057, 0x0021), 1469 PCMCIA_PFC_DEVICE_MANF_CARD(0, 0x0104, 0x000a), 1470 PCMCIA_PFC_DEVICE_MANF_CARD(0, 0x0105, 0xea15), 1471 PCMCIA_PFC_DEVICE_MANF_CARD(0, 0x0143, 0x3341), 1472 PCMCIA_PFC_DEVICE_MANF_CARD(0, 0x0143, 0xc0ab), 1473 PCMCIA_PFC_DEVICE_MANF_CARD(0, 0x021b, 0x0101), 1474 PCMCIA_PFC_DEVICE_MANF_CARD(0, 0x08a1, 0xc0ab), 1475 PCMCIA_PFC_DEVICE_PROD_ID12(0, "AnyCom", "Fast Ethernet + 56K COMBO", 0x578ba6e7, 0xb0ac62c4), 1476 PCMCIA_PFC_DEVICE_PROD_ID12(0, "ATKK", "LM33-PCM-T", 0xba9eb7e2, 0x077c174e), 1477 PCMCIA_PFC_DEVICE_PROD_ID12(0, "D-Link", "DME336T", 0x1a424a1c, 0xb23897ff), 1478 PCMCIA_PFC_DEVICE_PROD_ID12(0, "Grey Cell", "GCS3000", 0x2a151fac, 0x48b932ae), 1479 PCMCIA_PFC_DEVICE_PROD_ID12(0, "Linksys", "EtherFast 10&100 + 56K PC Card (PCMLM56)", 0x0733cc81, 0xb3765033), 1480 PCMCIA_PFC_DEVICE_PROD_ID12(0, "LINKSYS", "PCMLM336", 0xf7cb0b07, 0x7a821b58), 1481 PCMCIA_PFC_DEVICE_PROD_ID12(0, "MICRO RESEARCH", "COMBO-L/M-336", 0xb2ced065, 0x3ced0555), 1482 PCMCIA_PFC_DEVICE_PROD_ID12(0, "PCMCIAs", "ComboCard", 0xdcfe12d3, 0xcd8906cc), 1483 PCMCIA_PFC_DEVICE_PROD_ID12(0, "PCMCIAs", "LanModem", 0xdcfe12d3, 0xc67c648f), 1484 PCMCIA_MFC_DEVICE_PROD_ID12(0, "IBM", "Home and Away 28.8 PC Card ", 0xb569a6e5, 0x5bd4ff2c), 1485 PCMCIA_MFC_DEVICE_PROD_ID12(0, "IBM", "Home and Away Credit Card Adapter", 0xb569a6e5, 0x4bdf15c3), 1486 PCMCIA_MFC_DEVICE_PROD_ID12(0, "IBM", "w95 Home and Away Credit Card ", 0xb569a6e5, 0xae911c15), 1487 PCMCIA_MFC_DEVICE_PROD_ID123(0, "APEX DATA", "MULTICARD", "ETHERNET-MODEM", 0x11c2da09, 0x7289dc5d, 0xaad95e1f), 1488 PCMCIA_MFC_DEVICE_PROD_ID2(0, "FAX/Modem/Ethernet Combo Card ", 0x1ed59302), 1489 PCMCIA_DEVICE_MANF_CARD(0x0057, 0x1004), 1490 PCMCIA_DEVICE_MANF_CARD(0x0104, 0x000d), 1491 PCMCIA_DEVICE_MANF_CARD(0x0104, 0x0075), 1492 PCMCIA_DEVICE_MANF_CARD(0x0104, 0x0145), 1493 PCMCIA_DEVICE_MANF_CARD(0x0149, 0x0230), 1494 PCMCIA_DEVICE_MANF_CARD(0x0149, 0x4530), 1495 PCMCIA_DEVICE_MANF_CARD(0x0149, 0xc1ab), 1496 PCMCIA_DEVICE_MANF_CARD(0x0186, 0x0110), 1497 PCMCIA_DEVICE_MANF_CARD(0x01bf, 0x8041), 1498 PCMCIA_DEVICE_MANF_CARD(0x0213, 0x2452), 1499 PCMCIA_DEVICE_MANF_CARD(0x026f, 0x0300), 1500 PCMCIA_DEVICE_MANF_CARD(0x026f, 0x0307), 1501 PCMCIA_DEVICE_MANF_CARD(0x026f, 0x030a), 1502 PCMCIA_DEVICE_MANF_CARD(0x0274, 0x1103), 1503 PCMCIA_DEVICE_MANF_CARD(0x0274, 0x1121), 1504 PCMCIA_DEVICE_MANF_CARD(0xc001, 0x0009), 1505 PCMCIA_DEVICE_PROD_ID12("2408LAN", "Ethernet", 0x352fff7f, 0x00b2e941), 1506 PCMCIA_DEVICE_PROD_ID1234("Socket", "CF 10/100 Ethernet Card", "Revision B", "05/11/06", 0xb38bcc2e, 0x4de88352, 0xeaca6c8d, 0x7e57c22e), 1507 PCMCIA_DEVICE_PROD_ID123("Cardwell", "PCMCIA", "ETHERNET", 0x9533672e, 0x281f1c5d, 0x3ff7175b), 1508 PCMCIA_DEVICE_PROD_ID123("CNet ", "CN30BC", "ETHERNET", 0x9fe55d3d, 0x85601198, 0x3ff7175b), 1509 PCMCIA_DEVICE_PROD_ID123("Digital", "Ethernet", "Adapter", 0x9999ab35, 0x00b2e941, 0x4b0d829e), 1510 PCMCIA_DEVICE_PROD_ID123("Edimax Technology Inc.", "PCMCIA", "Ethernet Card", 0x738a0019, 0x281f1c5d, 0x5e9d92c0), 1511 PCMCIA_DEVICE_PROD_ID123("EFA ", "EFA207", "ETHERNET", 0x3d294be4, 0xeb9aab6c, 0x3ff7175b), 1512 PCMCIA_DEVICE_PROD_ID123("I-O DATA", "PCLA", "ETHERNET", 0x1d55d7ec, 0xe4c64d34, 0x3ff7175b), 1513 PCMCIA_DEVICE_PROD_ID123("IO DATA", "PCLATE", "ETHERNET", 0x547e66dc, 0x6b260753, 0x3ff7175b), 1514 PCMCIA_DEVICE_PROD_ID123("KingMax Technology Inc.", "EN10-T2", "PCMCIA Ethernet Card", 0x932b7189, 0x699e4436, 0x6f6652e0), 1515 PCMCIA_DEVICE_PROD_ID123("PCMCIA", "PCMCIA-ETHERNET-CARD", "UE2216", 0x281f1c5d, 0xd4cd2f20, 0xb87add82), 1516 PCMCIA_DEVICE_PROD_ID123("PCMCIA", "PCMCIA-ETHERNET-CARD", "UE2620", 0x281f1c5d, 0xd4cd2f20, 0x7d3d83a8), 1517 PCMCIA_DEVICE_PROD_ID1("2412LAN", 0x67f236ab), 1518 PCMCIA_DEVICE_PROD_ID12("ACCTON", "EN2212", 0xdfc6b5b2, 0xcb112a11), 1519 PCMCIA_DEVICE_PROD_ID12("ACCTON", "EN2216-PCMCIA-ETHERNET", 0xdfc6b5b2, 0x5542bfff), 1520 PCMCIA_DEVICE_PROD_ID12("Allied Telesis, K.K.", "CentreCOM LA100-PCM-T V2 100/10M LAN PC Card", 0xbb7fbdd7, 0xcd91cc68), 1521 PCMCIA_DEVICE_PROD_ID12("Allied Telesis K.K.", "LA100-PCM V2", 0x36634a66, 0xc6d05997), 1522 PCMCIA_DEVICE_PROD_ID12("Allied Telesis, K.K.", "CentreCOM LA-PCM_V2", 0xbb7fBdd7, 0x28e299f8), 1523 PCMCIA_DEVICE_PROD_ID12("Allied Telesis K.K.", "LA-PCM V3", 0x36634a66, 0x62241d96), 1524 PCMCIA_DEVICE_PROD_ID12("AmbiCom", "AMB8010", 0x5070a7f9, 0x82f96e96), 1525 PCMCIA_DEVICE_PROD_ID12("AmbiCom", "AMB8610", 0x5070a7f9, 0x86741224), 1526 PCMCIA_DEVICE_PROD_ID12("AmbiCom Inc", "AMB8002", 0x93b15570, 0x75ec3efb), 1527 PCMCIA_DEVICE_PROD_ID12("AmbiCom Inc", "AMB8002T", 0x93b15570, 0x461c5247), 1528 PCMCIA_DEVICE_PROD_ID12("AmbiCom Inc", "AMB8010", 0x93b15570, 0x82f96e96), 1529 PCMCIA_DEVICE_PROD_ID12("AnyCom", "ECO Ethernet", 0x578ba6e7, 0x0a9888c1), 1530 PCMCIA_DEVICE_PROD_ID12("AnyCom", "ECO Ethernet 10/100", 0x578ba6e7, 0x939fedbd), 1531 PCMCIA_DEVICE_PROD_ID12("AROWANA", "PCMCIA Ethernet LAN Card", 0x313adbc8, 0x08d9f190), 1532 PCMCIA_DEVICE_PROD_ID12("ASANTE", "FriendlyNet PC Card", 0x3a7ade0f, 0x41c64504), 1533 PCMCIA_DEVICE_PROD_ID12("Billionton", "LNT-10TB", 0x552ab682, 0xeeb1ba6a), 1534 PCMCIA_DEVICE_PROD_ID12("CF", "10Base-Ethernet", 0x44ebf863, 0x93ae4d79), 1535 PCMCIA_DEVICE_PROD_ID12("CNet", "CN40BC Ethernet", 0xbc477dde, 0xfba775a7), 1536 PCMCIA_DEVICE_PROD_ID12("COMPU-SHACK", "BASEline PCMCIA 10 MBit Ethernetadapter", 0xfa2e424d, 0xe9190d8a), 1537 PCMCIA_DEVICE_PROD_ID12("COMPU-SHACK", "FASTline PCMCIA 10/100 Fast-Ethernet", 0xfa2e424d, 0x3953d9b9), 1538 PCMCIA_DEVICE_PROD_ID12("CONTEC", "C-NET(PC)C-10L", 0x21cab552, 0xf6f90722), 1539 PCMCIA_DEVICE_PROD_ID12("corega", "FEther PCC-TXF", 0x0a21501a, 0xa51564a2), 1540 PCMCIA_DEVICE_PROD_ID12("corega", "Ether CF-TD", 0x0a21501a, 0x6589340a), 1541 PCMCIA_DEVICE_PROD_ID12("corega K.K.", "corega Ether CF-TD LAN Card", 0x5261440f, 0x8797663b), 1542 PCMCIA_DEVICE_PROD_ID12("corega K.K.", "corega EtherII PCC-T", 0x5261440f, 0xfa9d85bd), 1543 PCMCIA_DEVICE_PROD_ID12("corega K.K.", "corega EtherII PCC-TD", 0x5261440f, 0xc49bd73d), 1544 PCMCIA_DEVICE_PROD_ID12("Corega K.K.", "corega EtherII PCC-TD", 0xd4fdcbd8, 0xc49bd73d), 1545 PCMCIA_DEVICE_PROD_ID12("corega K.K.", "corega Ether PCC-T", 0x5261440f, 0x6705fcaa), 1546 PCMCIA_DEVICE_PROD_ID12("corega K.K.", "corega Ether PCC-TD", 0x5261440f, 0x47d5ca83), 1547 PCMCIA_DEVICE_PROD_ID12("corega K.K.", "corega FastEther PCC-TX", 0x5261440f, 0x485e85d9), 1548 PCMCIA_DEVICE_PROD_ID12("Corega,K.K.", "Ethernet LAN Card", 0x110d26d9, 0x9fd2f0a2), 1549 PCMCIA_DEVICE_PROD_ID12("corega,K.K.", "Ethernet LAN Card", 0x9791a90e, 0x9fd2f0a2), 1550 PCMCIA_DEVICE_PROD_ID12("corega K.K.", "(CG-LAPCCTXD)", 0x5261440f, 0x73ec0d88), 1551 PCMCIA_DEVICE_PROD_ID12("CouplerlessPCMCIA", "100BASE", 0xee5af0ad, 0x7c2add04), 1552 PCMCIA_DEVICE_PROD_ID12("CyQ've", "ELA-010", 0x77008979, 0x9d8d445d), 1553 PCMCIA_DEVICE_PROD_ID12("CyQ've", "ELA-110E 10/100M LAN Card", 0x77008979, 0xfd184814), 1554 PCMCIA_DEVICE_PROD_ID12("DataTrek.", "NetCard ", 0x5cd66d9d, 0x84697ce0), 1555 PCMCIA_DEVICE_PROD_ID12("Dayna Communications, Inc.", "CommuniCard E", 0x0c629325, 0xb4e7dbaf), 1556 PCMCIA_DEVICE_PROD_ID12("Digicom", "Palladio LAN 10/100", 0x697403d8, 0xe160b995), 1557 PCMCIA_DEVICE_PROD_ID12("Digicom", "Palladio LAN 10/100 Dongless", 0x697403d8, 0xa6d3b233), 1558 PCMCIA_DEVICE_PROD_ID12("DIGITAL", "DEPCM-XX", 0x69616cb3, 0xe600e76e), 1559 PCMCIA_DEVICE_PROD_ID12("D-Link", "DE-650", 0x1a424a1c, 0xf28c8398), 1560 PCMCIA_DEVICE_PROD_ID12("D-Link", "DE-660", 0x1a424a1c, 0xd9a1d05b), 1561 PCMCIA_DEVICE_PROD_ID12("D-Link", "DE-660+", 0x1a424a1c, 0x50dcd0ec), 1562 PCMCIA_DEVICE_PROD_ID12("D-Link", "DFE-650", 0x1a424a1c, 0x0f0073f9), 1563 PCMCIA_DEVICE_PROD_ID12("Dual Speed", "10/100 PC Card", 0x725b842d, 0xf1efee84), 1564 PCMCIA_DEVICE_PROD_ID12("Dual Speed", "10/100 Port Attached PC Card", 0x725b842d, 0x2db1f8e9), 1565 PCMCIA_DEVICE_PROD_ID12("Dynalink", "L10BC", 0x55632fd5, 0xdc65f2b1), 1566 PCMCIA_DEVICE_PROD_ID12("DYNALINK", "L10BC", 0x6a26d1cf, 0xdc65f2b1), 1567 PCMCIA_DEVICE_PROD_ID12("DYNALINK", "L10C", 0x6a26d1cf, 0xc4f84efb), 1568 PCMCIA_DEVICE_PROD_ID12("E-CARD", "E-CARD", 0x6701da11, 0x6701da11), 1569 PCMCIA_DEVICE_PROD_ID12("EIGER Labs Inc.", "Ethernet 10BaseT card", 0x53c864c6, 0xedd059f6), 1570 PCMCIA_DEVICE_PROD_ID12("EIGER Labs Inc.", "Ethernet Combo card", 0x53c864c6, 0x929c486c), 1571 PCMCIA_DEVICE_PROD_ID12("Ethernet", "Adapter", 0x00b2e941, 0x4b0d829e), 1572 PCMCIA_DEVICE_PROD_ID12("Ethernet Adapter", "E2000 PCMCIA Ethernet", 0x96767301, 0x71fbbc61), 1573 PCMCIA_DEVICE_PROD_ID12("Ethernet PCMCIA adapter", "EP-210", 0x8dd86181, 0xf2b52517), 1574 PCMCIA_DEVICE_PROD_ID12("Fast Ethernet", "Adapter", 0xb4be14e3, 0x4b0d829e), 1575 PCMCIA_DEVICE_PROD_ID12("Grey Cell", "GCS2000", 0x2a151fac, 0xf00555cb), 1576 PCMCIA_DEVICE_PROD_ID12("Grey Cell", "GCS2220", 0x2a151fac, 0xc1b7e327), 1577 PCMCIA_DEVICE_PROD_ID12("GVC", "NIC-2000p", 0x76e171bd, 0x6eb1c947), 1578 PCMCIA_DEVICE_PROD_ID12("IBM Corp.", "Ethernet", 0xe3736c88, 0x00b2e941), 1579 PCMCIA_DEVICE_PROD_ID12("IC-CARD", "IC-CARD", 0x60cb09a6, 0x60cb09a6), 1580 PCMCIA_DEVICE_PROD_ID12("IC-CARD+", "IC-CARD+", 0x93693494, 0x93693494), 1581 PCMCIA_DEVICE_PROD_ID12("IO DATA", "PCETTX", 0x547e66dc, 0x6fc5459b), 1582 PCMCIA_DEVICE_PROD_ID12("iPort", "10/100 Ethernet Card", 0x56c538d2, 0x11b0ffc0), 1583 PCMCIA_DEVICE_PROD_ID12("KANSAI ELECTRIC CO.,LTD", "KLA-PCM/T", 0xb18dc3b4, 0xcc51a956), 1584 PCMCIA_DEVICE_PROD_ID12("KENTRONICS", "KEP-230", 0xaf8144c9, 0x868f6616), 1585 PCMCIA_DEVICE_PROD_ID12("KCI", "PE520 PCMCIA Ethernet Adapter", 0xa89b87d3, 0x1eb88e64), 1586 PCMCIA_DEVICE_PROD_ID12("KINGMAX", "EN10T2T", 0x7bcb459a, 0xa5c81fa5), 1587 PCMCIA_DEVICE_PROD_ID12("Kingston", "KNE-PC2", 0x1128e633, 0xce2a89b3), 1588 PCMCIA_DEVICE_PROD_ID12("Kingston Technology Corp.", "EtheRx PC Card Ethernet Adapter", 0x313c7be3, 0x0afb54a2), 1589 PCMCIA_DEVICE_PROD_ID12("Laneed", "LD-10/100CD", 0x1b7827b2, 0xcda71d1c), 1590 PCMCIA_DEVICE_PROD_ID12("Laneed", "LD-CDF", 0x1b7827b2, 0xfec71e40), 1591 PCMCIA_DEVICE_PROD_ID12("Laneed", "LD-CDL/T", 0x1b7827b2, 0x79fba4f7), 1592 PCMCIA_DEVICE_PROD_ID12("Laneed", "LD-CDS", 0x1b7827b2, 0x931afaab), 1593 PCMCIA_DEVICE_PROD_ID12("LEMEL", "LM-N89TX PRO", 0xbbefb52f, 0xd2897a97), 1594 PCMCIA_DEVICE_PROD_ID12("Linksys", "Combo PCMCIA EthernetCard (EC2T)", 0x0733cc81, 0x32ee8c78), 1595 PCMCIA_DEVICE_PROD_ID12("LINKSYS", "E-CARD", 0xf7cb0b07, 0x6701da11), 1596 PCMCIA_DEVICE_PROD_ID12("Linksys", "EtherFast 10/100 Integrated PC Card (PCM100)", 0x0733cc81, 0x453c3f9d), 1597 PCMCIA_DEVICE_PROD_ID12("Linksys", "EtherFast 10/100 PC Card (PCMPC100)", 0x0733cc81, 0x66c5a389), 1598 PCMCIA_DEVICE_PROD_ID12("Linksys", "EtherFast 10/100 PC Card (PCMPC100 V2)", 0x0733cc81, 0x3a3b28e9), 1599 PCMCIA_DEVICE_PROD_ID12("Linksys", "HomeLink Phoneline + 10/100 Network PC Card (PCM100H1)", 0x733cc81, 0x7a3e5c3a), 1600 PCMCIA_DEVICE_PROD_ID12("Logitec", "LPM-LN100TX", 0x88fcdeda, 0x6d772737), 1601 PCMCIA_DEVICE_PROD_ID12("Logitec", "LPM-LN100TE", 0x88fcdeda, 0x0e714bee), 1602 PCMCIA_DEVICE_PROD_ID12("Logitec", "LPM-LN20T", 0x88fcdeda, 0x81090922), 1603 PCMCIA_DEVICE_PROD_ID12("Logitec", "LPM-LN10TE", 0x88fcdeda, 0xc1e2521c), 1604 PCMCIA_DEVICE_PROD_ID12("LONGSHINE", "PCMCIA Ethernet Card", 0xf866b0b0, 0x6f6652e0), 1605 PCMCIA_DEVICE_PROD_ID12("MACNICA", "ME1-JEIDA", 0x20841b68, 0xaf8a3578), 1606 PCMCIA_DEVICE_PROD_ID12("Macsense", "MPC-10", 0xd830297f, 0xd265c307), 1607 PCMCIA_DEVICE_PROD_ID12("Matsushita Electric Industrial Co.,LTD.", "CF-VEL211", 0x44445376, 0x8ded41d4), 1608 PCMCIA_DEVICE_PROD_ID12("MAXTECH", "PCN2000", 0x78d64bc0, 0xca0ca4b8), 1609 PCMCIA_DEVICE_PROD_ID12("MELCO", "LPC2-T", 0x481e0094, 0xa2eb0cf3), 1610 PCMCIA_DEVICE_PROD_ID12("MELCO", "LPC2-TX", 0x481e0094, 0x41a6916c), 1611 PCMCIA_DEVICE_PROD_ID12("Microcom C.E.", "Travel Card LAN 10/100", 0x4b91cec7, 0xe70220d6), 1612 PCMCIA_DEVICE_PROD_ID12("Microdyne", "NE4200", 0x2e6da59b, 0x0478e472), 1613 PCMCIA_DEVICE_PROD_ID12("MIDORI ELEC.", "LT-PCMT", 0x648d55c1, 0xbde526c7), 1614 PCMCIA_DEVICE_PROD_ID12("National Semiconductor", "InfoMover 4100", 0x36e1191f, 0x60c229b9), 1615 PCMCIA_DEVICE_PROD_ID12("National Semiconductor", "InfoMover NE4100", 0x36e1191f, 0xa6617ec8), 1616 PCMCIA_DEVICE_PROD_ID12("NEC", "PC-9801N-J12", 0x18df0ba0, 0xbc912d76), 1617 PCMCIA_DEVICE_PROD_ID12("NETGEAR", "FA410TX", 0x9aa79dc3, 0x60e5bc0e), 1618 PCMCIA_DEVICE_PROD_ID12("Network Everywhere", "Fast Ethernet 10/100 PC Card", 0x820a67b6, 0x31ed1a5f), 1619 PCMCIA_DEVICE_PROD_ID12("NextCom K.K.", "Next Hawk", 0xaedaec74, 0xad050ef1), 1620 PCMCIA_DEVICE_PROD_ID12("PCMCIA", "10/100Mbps Ethernet Card", 0x281f1c5d, 0x6e41773b), 1621 PCMCIA_DEVICE_PROD_ID12("PCMCIA", "Ethernet", 0x281f1c5d, 0x00b2e941), 1622 PCMCIA_DEVICE_PROD_ID12("PCMCIA", "ETHERNET", 0x281f1c5d, 0x3ff7175b), 1623 PCMCIA_DEVICE_PROD_ID12("PCMCIA", "Ethernet 10BaseT Card", 0x281f1c5d, 0x4de2f6c8), 1624 PCMCIA_DEVICE_PROD_ID12("PCMCIA", "Ethernet Card", 0x281f1c5d, 0x5e9d92c0), 1625 PCMCIA_DEVICE_PROD_ID12("PCMCIA", "Ethernet Combo card", 0x281f1c5d, 0x929c486c), 1626 PCMCIA_DEVICE_PROD_ID12("PCMCIA", "ETHERNET V1.0", 0x281f1c5d, 0x4d8817c8), 1627 PCMCIA_DEVICE_PROD_ID12("PCMCIA", "FastEthernet", 0x281f1c5d, 0xfe871eeb), 1628 PCMCIA_DEVICE_PROD_ID12("PCMCIA", "Fast-Ethernet", 0x281f1c5d, 0x45f1f3b4), 1629 PCMCIA_DEVICE_PROD_ID12("PCMCIA", "FAST ETHERNET CARD", 0x281f1c5d, 0xec5dbca7), 1630 PCMCIA_DEVICE_PROD_ID12("PCMCIA LAN", "Ethernet", 0x7500e246, 0x00b2e941), 1631 PCMCIA_DEVICE_PROD_ID12("PCMCIA", "LNT-10TN", 0x281f1c5d, 0xe707f641), 1632 PCMCIA_DEVICE_PROD_ID12("PCMCIAs", "ComboCard", 0xdcfe12d3, 0xcd8906cc), 1633 PCMCIA_DEVICE_PROD_ID12("PCMCIA", "UE2212", 0x281f1c5d, 0xbf17199b), 1634 PCMCIA_DEVICE_PROD_ID12("PCMCIA", " Ethernet NE2000 Compatible", 0x281f1c5d, 0x42d5d7e1), 1635 PCMCIA_DEVICE_PROD_ID12("PRETEC", "Ethernet CompactLAN 10baseT 3.3V", 0xebf91155, 0x30074c80), 1636 PCMCIA_DEVICE_PROD_ID12("PRETEC", "Ethernet CompactLAN 10BaseT 3.3V", 0xebf91155, 0x7f5a4f50), 1637 PCMCIA_DEVICE_PROD_ID12("Psion Dacom", "Gold Card Ethernet", 0xf5f025c2, 0x3a30e110), 1638 PCMCIA_DEVICE_PROD_ID12("=RELIA==", "Ethernet", 0xcdd0644a, 0x00b2e941), 1639 PCMCIA_DEVICE_PROD_ID12("RIOS Systems Co.", "PC CARD3 ETHERNET", 0x7dd33481, 0x10b41826), 1640 PCMCIA_DEVICE_PROD_ID12("RP", "1625B Ethernet NE2000 Compatible", 0xe3e66e22, 0xb96150df), 1641 PCMCIA_DEVICE_PROD_ID12("RPTI", "EP400 Ethernet NE2000 Compatible", 0xdc6f88fd, 0x4a7e2ae0), 1642 PCMCIA_DEVICE_PROD_ID12("RPTI", "EP401 Ethernet NE2000 Compatible", 0xdc6f88fd, 0x4bcbd7fd), 1643 PCMCIA_DEVICE_PROD_ID12("RPTI LTD.", "EP400", 0xc53ac515, 0x81e39388), 1644 PCMCIA_DEVICE_PROD_ID12("SCM", "Ethernet Combo card", 0xbdc3b102, 0x929c486c), 1645 PCMCIA_DEVICE_PROD_ID12("Seiko Epson Corp.", "Ethernet", 0x09928730, 0x00b2e941), 1646 PCMCIA_DEVICE_PROD_ID12("SMC", "EZCard-10-PCMCIA", 0xc4f8b18b, 0xfb21d265), 1647 PCMCIA_DEVICE_PROD_ID12("Socket Communications Inc", "Socket EA PCMCIA LAN Adapter Revision D", 0xc70a4760, 0x2ade483e), 1648 PCMCIA_DEVICE_PROD_ID12("Socket Communications Inc", "Socket EA PCMCIA LAN Adapter Revision E", 0xc70a4760, 0x5dd978a8), 1649 PCMCIA_DEVICE_PROD_ID12("TDK", "LAK-CD031 for PCMCIA", 0x1eae9475, 0x0ed386fa), 1650 PCMCIA_DEVICE_PROD_ID12("Telecom Device K.K.", "SuperSocket RE450T", 0x466b05f0, 0x8b74bc4f), 1651 PCMCIA_DEVICE_PROD_ID12("Telecom Device K.K.", "SuperSocket RE550T", 0x466b05f0, 0x33c8db2a), 1652 PCMCIA_DEVICE_PROD_ID13("Hypertec", "EP401", 0x8787bec7, 0xf6e4a31e), 1653 PCMCIA_DEVICE_PROD_ID13("KingMax Technology Inc.", "Ethernet Card", 0x932b7189, 0x5e9d92c0), 1654 PCMCIA_DEVICE_PROD_ID13("LONGSHINE", "EP401", 0xf866b0b0, 0xf6e4a31e), 1655 PCMCIA_DEVICE_PROD_ID13("Xircom", "CFE-10", 0x2e3ee845, 0x22a49f89), 1656 PCMCIA_DEVICE_PROD_ID1("CyQ've 10 Base-T LAN CARD", 0x94faf360), 1657 PCMCIA_DEVICE_PROD_ID1("EP-210 PCMCIA LAN CARD.", 0x8850b4de), 1658 PCMCIA_DEVICE_PROD_ID1("ETHER-C16", 0x06a8514f), 1659 PCMCIA_DEVICE_PROD_ID1("NE2000 Compatible", 0x75b8ad5a), 1660 PCMCIA_DEVICE_PROD_ID2("EN-6200P2", 0xa996d078), 1661 /* too generic! */ 1662 /* PCMCIA_DEVICE_PROD_ID12("PCMCIA", "10/100 Ethernet Card", 0x281f1c5d, 0x11b0ffc0), */ 1663 PCMCIA_PFC_DEVICE_CIS_PROD_ID12(0, "PCMCIA", "EN2218-LAN/MODEM", 0x281f1c5d, 0x570f348e, "cis/PCMLM28.cis"), 1664 PCMCIA_PFC_DEVICE_CIS_PROD_ID12(0, "PCMCIA", "UE2218-LAN/MODEM", 0x281f1c5d, 0x6fdcacee, "cis/PCMLM28.cis"), 1665 PCMCIA_PFC_DEVICE_CIS_PROD_ID12(0, "Psion Dacom", "Gold Card V34 Ethernet", 0xf5f025c2, 0x338e8155, "cis/PCMLM28.cis"), 1666 PCMCIA_PFC_DEVICE_CIS_PROD_ID12(0, "Psion Dacom", "Gold Card V34 Ethernet GSM", 0xf5f025c2, 0x4ae85d35, "cis/PCMLM28.cis"), 1667 PCMCIA_PFC_DEVICE_CIS_PROD_ID12(0, "LINKSYS", "PCMLM28", 0xf7cb0b07, 0x66881874, "cis/PCMLM28.cis"), 1668 PCMCIA_PFC_DEVICE_CIS_PROD_ID12(0, "TOSHIBA", "Modem/LAN Card", 0xb4585a1a, 0x53f922f8, "cis/PCMLM28.cis"), 1669 PCMCIA_MFC_DEVICE_CIS_PROD_ID12(0, "DAYNA COMMUNICATIONS", "LAN AND MODEM MULTIFUNCTION", 0x8fdf8f89, 0xdd5ed9e8, "cis/DP83903.cis"), 1670 PCMCIA_MFC_DEVICE_CIS_PROD_ID4(0, "NSC MF LAN/Modem", 0x58fc6056, "cis/DP83903.cis"), 1671 PCMCIA_MFC_DEVICE_CIS_MANF_CARD(0, 0x0175, 0x0000, "cis/DP83903.cis"), 1672 PCMCIA_DEVICE_CIS_PROD_ID12("Allied Telesis,K.K", "Ethernet LAN Card", 0x2ad62f3c, 0x9fd2f0a2, "cis/LA-PCM.cis"), 1673 PCMCIA_DEVICE_CIS_PROD_ID12("KTI", "PE520 PLUS", 0xad180345, 0x9d58d392, "cis/PE520.cis"), 1674 PCMCIA_DEVICE_CIS_PROD_ID12("NDC", "Ethernet", 0x01c43ae1, 0x00b2e941, "cis/NE2K.cis"), 1675 PCMCIA_DEVICE_CIS_PROD_ID12("PMX ", "PE-200", 0x34f3f1c8, 0x10b59f8c, "cis/PE-200.cis"), 1676 PCMCIA_DEVICE_CIS_PROD_ID12("TAMARACK", "Ethernet", 0xcf434fba, 0x00b2e941, "cis/tamarack.cis"), 1677 PCMCIA_DEVICE_PROD_ID12("Ethernet", "CF Size PC Card", 0x00b2e941, 0x43ac239b), 1678 PCMCIA_DEVICE_PROD_ID123("Fast Ethernet", "CF Size PC Card", "1.0", 1679 0xb4be14e3, 0x43ac239b, 0x0877b627), 1680 PCMCIA_DEVICE_NULL 1681 }; 1682 MODULE_DEVICE_TABLE(pcmcia, pcnet_ids); 1683 MODULE_FIRMWARE("cis/PCMLM28.cis"); 1684 MODULE_FIRMWARE("cis/DP83903.cis"); 1685 MODULE_FIRMWARE("cis/LA-PCM.cis"); 1686 MODULE_FIRMWARE("cis/PE520.cis"); 1687 MODULE_FIRMWARE("cis/NE2K.cis"); 1688 MODULE_FIRMWARE("cis/PE-200.cis"); 1689 MODULE_FIRMWARE("cis/tamarack.cis"); 1690 1691 static struct pcmcia_driver pcnet_driver = { 1692 .name = "pcnet_cs", 1693 .probe = pcnet_probe, 1694 .remove = pcnet_detach, 1695 .owner = THIS_MODULE, 1696 .id_table = pcnet_ids, 1697 .suspend = pcnet_suspend, 1698 .resume = pcnet_resume, 1699 }; 1700 module_pcmcia_driver(pcnet_driver); 1701