1 /* ne2k-pci.c: A NE2000 clone on PCI bus driver for Linux. */ 2 /* 3 A Linux device driver for PCI NE2000 clones. 4 5 Authors and other copyright holders: 6 1992-2000 by Donald Becker, NE2000 core and various modifications. 7 1995-1998 by Paul Gortmaker, core modifications and PCI support. 8 Copyright 1993 assigned to the United States Government as represented 9 by the Director, National Security Agency. 10 11 This software may be used and distributed according to the terms of 12 the GNU General Public License (GPL), incorporated herein by reference. 13 Drivers based on or derived from this code fall under the GPL and must 14 retain the authorship, copyright and license notice. This file is not 15 a complete program and may only be used when the entire operating 16 system is licensed under the GPL. 17 18 The author may be reached as becker@scyld.com, or C/O 19 Scyld Computing Corporation 20 410 Severn Ave., Suite 210 21 Annapolis MD 21403 22 23 Issues remaining: 24 People are making PCI ne2000 clones! Oh the horror, the horror... 25 Limited full-duplex support. 26 */ 27 28 #define DRV_NAME "ne2k-pci" 29 #define DRV_VERSION "1.03" 30 #define DRV_RELDATE "9/22/2003" 31 32 33 /* The user-configurable values. 34 These may be modified when a driver module is loaded.*/ 35 36 #define MAX_UNITS 8 /* More are supported, limit only on options */ 37 /* Used to pass the full-duplex flag, etc. */ 38 static int full_duplex[MAX_UNITS]; 39 static int options[MAX_UNITS]; 40 41 /* Force a non std. amount of memory. Units are 256 byte pages. */ 42 /* #define PACKETBUF_MEMSIZE 0x40 */ 43 44 45 #include <linux/module.h> 46 #include <linux/kernel.h> 47 #include <linux/errno.h> 48 #include <linux/pci.h> 49 #include <linux/init.h> 50 #include <linux/interrupt.h> 51 #include <linux/ethtool.h> 52 #include <linux/netdevice.h> 53 #include <linux/etherdevice.h> 54 55 #include <asm/io.h> 56 #include <asm/irq.h> 57 #include <asm/uaccess.h> 58 59 #include "8390.h" 60 61 static u32 ne2k_msg_enable; 62 63 /* These identify the driver base version and may not be removed. */ 64 static const char version[] = 65 KERN_INFO DRV_NAME ".c:v" DRV_VERSION " " DRV_RELDATE 66 " D. Becker/P. Gortmaker\n"; 67 68 #if defined(__powerpc__) 69 #define inl_le(addr) le32_to_cpu(inl(addr)) 70 #define inw_le(addr) le16_to_cpu(inw(addr)) 71 #endif 72 73 #define PFX DRV_NAME ": " 74 75 MODULE_AUTHOR("Donald Becker / Paul Gortmaker"); 76 MODULE_DESCRIPTION("PCI NE2000 clone driver"); 77 MODULE_LICENSE("GPL"); 78 79 module_param_named(msg_enable, ne2k_msg_enable, uint, (S_IRUSR|S_IRGRP|S_IROTH)); 80 module_param_array(options, int, NULL, 0); 81 module_param_array(full_duplex, int, NULL, 0); 82 MODULE_PARM_DESC(msg_enable, "Debug message level (see linux/netdevice.h for bitmap)"); 83 MODULE_PARM_DESC(options, "Bit 5: full duplex"); 84 MODULE_PARM_DESC(full_duplex, "full duplex setting(s) (1)"); 85 86 /* Some defines that people can play with if so inclined. */ 87 88 /* Use 32 bit data-movement operations instead of 16 bit. */ 89 #define USE_LONGIO 90 91 /* Do we implement the read before write bugfix ? */ 92 /* #define NE_RW_BUGFIX */ 93 94 /* Flags. We rename an existing ei_status field to store flags! */ 95 /* Thus only the low 8 bits are usable for non-init-time flags. */ 96 #define ne2k_flags reg0 97 enum { 98 ONLY_16BIT_IO=8, ONLY_32BIT_IO=4, /* Chip can do only 16/32-bit xfers. */ 99 FORCE_FDX=0x20, /* User override. */ 100 REALTEK_FDX=0x40, HOLTEK_FDX=0x80, 101 STOP_PG_0x60=0x100, 102 }; 103 104 enum ne2k_pci_chipsets { 105 CH_RealTek_RTL_8029 = 0, 106 CH_Winbond_89C940, 107 CH_Compex_RL2000, 108 CH_KTI_ET32P2, 109 CH_NetVin_NV5000SC, 110 CH_Via_86C926, 111 CH_SureCom_NE34, 112 CH_Winbond_W89C940F, 113 CH_Holtek_HT80232, 114 CH_Holtek_HT80229, 115 CH_Winbond_89C940_8c4a, 116 }; 117 118 119 static struct { 120 char *name; 121 int flags; 122 } pci_clone_list[] = { 123 {"RealTek RTL-8029", REALTEK_FDX}, 124 {"Winbond 89C940", 0}, 125 {"Compex RL2000", 0}, 126 {"KTI ET32P2", 0}, 127 {"NetVin NV5000SC", 0}, 128 {"Via 86C926", ONLY_16BIT_IO}, 129 {"SureCom NE34", 0}, 130 {"Winbond W89C940F", 0}, 131 {"Holtek HT80232", ONLY_16BIT_IO | HOLTEK_FDX}, 132 {"Holtek HT80229", ONLY_32BIT_IO | HOLTEK_FDX | STOP_PG_0x60 }, 133 {"Winbond W89C940(misprogrammed)", 0}, 134 {NULL,} 135 }; 136 137 138 static const struct pci_device_id ne2k_pci_tbl[] = { 139 { 0x10ec, 0x8029, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CH_RealTek_RTL_8029 }, 140 { 0x1050, 0x0940, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CH_Winbond_89C940 }, 141 { 0x11f6, 0x1401, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CH_Compex_RL2000 }, 142 { 0x8e2e, 0x3000, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CH_KTI_ET32P2 }, 143 { 0x4a14, 0x5000, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CH_NetVin_NV5000SC }, 144 { 0x1106, 0x0926, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CH_Via_86C926 }, 145 { 0x10bd, 0x0e34, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CH_SureCom_NE34 }, 146 { 0x1050, 0x5a5a, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CH_Winbond_W89C940F }, 147 { 0x12c3, 0x0058, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CH_Holtek_HT80232 }, 148 { 0x12c3, 0x5598, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CH_Holtek_HT80229 }, 149 { 0x8c4a, 0x1980, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CH_Winbond_89C940_8c4a }, 150 { 0, } 151 }; 152 MODULE_DEVICE_TABLE(pci, ne2k_pci_tbl); 153 154 155 /* ---- No user-serviceable parts below ---- */ 156 157 #define NE_BASE (dev->base_addr) 158 #define NE_CMD 0x00 159 #define NE_DATAPORT 0x10 /* NatSemi-defined port window offset. */ 160 #define NE_RESET 0x1f /* Issue a read to reset, a write to clear. */ 161 #define NE_IO_EXTENT 0x20 162 163 #define NESM_START_PG 0x40 /* First page of TX buffer */ 164 #define NESM_STOP_PG 0x80 /* Last page +1 of RX ring */ 165 166 167 static int ne2k_pci_open(struct net_device *dev); 168 static int ne2k_pci_close(struct net_device *dev); 169 170 static void ne2k_pci_reset_8390(struct net_device *dev); 171 static void ne2k_pci_get_8390_hdr(struct net_device *dev, struct e8390_pkt_hdr *hdr, 172 int ring_page); 173 static void ne2k_pci_block_input(struct net_device *dev, int count, 174 struct sk_buff *skb, int ring_offset); 175 static void ne2k_pci_block_output(struct net_device *dev, const int count, 176 const unsigned char *buf, const int start_page); 177 static const struct ethtool_ops ne2k_pci_ethtool_ops; 178 179 180 181 /* There is no room in the standard 8390 structure for extra info we need, 182 so we build a meta/outer-wrapper structure.. */ 183 struct ne2k_pci_card { 184 struct net_device *dev; 185 struct pci_dev *pci_dev; 186 }; 187 188 189 190 /* 191 NEx000-clone boards have a Station Address (SA) PROM (SAPROM) in the packet 192 buffer memory space. By-the-spec NE2000 clones have 0x57,0x57 in bytes 193 0x0e,0x0f of the SAPROM, while other supposed NE2000 clones must be 194 detected by their SA prefix. 195 196 Reading the SAPROM from a word-wide card with the 8390 set in byte-wide 197 mode results in doubled values, which can be detected and compensated for. 198 199 The probe is also responsible for initializing the card and filling 200 in the 'dev' and 'ei_status' structures. 201 */ 202 203 static const struct net_device_ops ne2k_netdev_ops = { 204 .ndo_open = ne2k_pci_open, 205 .ndo_stop = ne2k_pci_close, 206 .ndo_start_xmit = ei_start_xmit, 207 .ndo_tx_timeout = ei_tx_timeout, 208 .ndo_get_stats = ei_get_stats, 209 .ndo_set_rx_mode = ei_set_multicast_list, 210 .ndo_validate_addr = eth_validate_addr, 211 .ndo_set_mac_address = eth_mac_addr, 212 .ndo_change_mtu = eth_change_mtu, 213 #ifdef CONFIG_NET_POLL_CONTROLLER 214 .ndo_poll_controller = ei_poll, 215 #endif 216 }; 217 218 static int ne2k_pci_init_one(struct pci_dev *pdev, 219 const struct pci_device_id *ent) 220 { 221 struct net_device *dev; 222 int i; 223 unsigned char SA_prom[32]; 224 int start_page, stop_page; 225 int irq, reg0, chip_idx = ent->driver_data; 226 static unsigned int fnd_cnt; 227 long ioaddr; 228 int flags = pci_clone_list[chip_idx].flags; 229 struct ei_device *ei_local; 230 231 /* when built into the kernel, we only print version if device is found */ 232 #ifndef MODULE 233 static int printed_version; 234 if (!printed_version++) 235 printk(version); 236 #endif 237 238 fnd_cnt++; 239 240 i = pci_enable_device (pdev); 241 if (i) 242 return i; 243 244 ioaddr = pci_resource_start (pdev, 0); 245 irq = pdev->irq; 246 247 if (!ioaddr || ((pci_resource_flags (pdev, 0) & IORESOURCE_IO) == 0)) { 248 dev_err(&pdev->dev, "no I/O resource at PCI BAR #0\n"); 249 return -ENODEV; 250 } 251 252 if (request_region (ioaddr, NE_IO_EXTENT, DRV_NAME) == NULL) { 253 dev_err(&pdev->dev, "I/O resource 0x%x @ 0x%lx busy\n", 254 NE_IO_EXTENT, ioaddr); 255 return -EBUSY; 256 } 257 258 reg0 = inb(ioaddr); 259 if (reg0 == 0xFF) 260 goto err_out_free_res; 261 262 /* Do a preliminary verification that we have a 8390. */ 263 { 264 int regd; 265 outb(E8390_NODMA+E8390_PAGE1+E8390_STOP, ioaddr + E8390_CMD); 266 regd = inb(ioaddr + 0x0d); 267 outb(0xff, ioaddr + 0x0d); 268 outb(E8390_NODMA+E8390_PAGE0, ioaddr + E8390_CMD); 269 inb(ioaddr + EN0_COUNTER0); /* Clear the counter by reading. */ 270 if (inb(ioaddr + EN0_COUNTER0) != 0) { 271 outb(reg0, ioaddr); 272 outb(regd, ioaddr + 0x0d); /* Restore the old values. */ 273 goto err_out_free_res; 274 } 275 } 276 277 /* Allocate net_device, dev->priv; fill in 8390 specific dev fields. */ 278 dev = alloc_ei_netdev(); 279 if (!dev) { 280 dev_err(&pdev->dev, "cannot allocate ethernet device\n"); 281 goto err_out_free_res; 282 } 283 dev->netdev_ops = &ne2k_netdev_ops; 284 ei_local = netdev_priv(dev); 285 ei_local->msg_enable = ne2k_msg_enable; 286 287 SET_NETDEV_DEV(dev, &pdev->dev); 288 289 /* Reset card. Who knows what dain-bramaged state it was left in. */ 290 { 291 unsigned long reset_start_time = jiffies; 292 293 outb(inb(ioaddr + NE_RESET), ioaddr + NE_RESET); 294 295 /* This looks like a horrible timing loop, but it should never take 296 more than a few cycles. 297 */ 298 while ((inb(ioaddr + EN0_ISR) & ENISR_RESET) == 0) 299 /* Limit wait: '2' avoids jiffy roll-over. */ 300 if (jiffies - reset_start_time > 2) { 301 dev_err(&pdev->dev, 302 "Card failure (no reset ack).\n"); 303 goto err_out_free_netdev; 304 } 305 306 outb(0xff, ioaddr + EN0_ISR); /* Ack all intr. */ 307 } 308 309 /* Read the 16 bytes of station address PROM. 310 We must first initialize registers, similar to NS8390_init(eifdev, 0). 311 We can't reliably read the SAPROM address without this. 312 (I learned the hard way!). */ 313 { 314 struct {unsigned char value, offset; } program_seq[] = { 315 {E8390_NODMA+E8390_PAGE0+E8390_STOP, E8390_CMD}, /* Select page 0*/ 316 {0x49, EN0_DCFG}, /* Set word-wide access. */ 317 {0x00, EN0_RCNTLO}, /* Clear the count regs. */ 318 {0x00, EN0_RCNTHI}, 319 {0x00, EN0_IMR}, /* Mask completion irq. */ 320 {0xFF, EN0_ISR}, 321 {E8390_RXOFF, EN0_RXCR}, /* 0x20 Set to monitor */ 322 {E8390_TXOFF, EN0_TXCR}, /* 0x02 and loopback mode. */ 323 {32, EN0_RCNTLO}, 324 {0x00, EN0_RCNTHI}, 325 {0x00, EN0_RSARLO}, /* DMA starting at 0x0000. */ 326 {0x00, EN0_RSARHI}, 327 {E8390_RREAD+E8390_START, E8390_CMD}, 328 }; 329 for (i = 0; i < ARRAY_SIZE(program_seq); i++) 330 outb(program_seq[i].value, ioaddr + program_seq[i].offset); 331 332 } 333 334 /* Note: all PCI cards have at least 16 bit access, so we don't have 335 to check for 8 bit cards. Most cards permit 32 bit access. */ 336 if (flags & ONLY_32BIT_IO) { 337 for (i = 0; i < 4 ; i++) 338 ((u32 *)SA_prom)[i] = le32_to_cpu(inl(ioaddr + NE_DATAPORT)); 339 } else 340 for(i = 0; i < 32 /*sizeof(SA_prom)*/; i++) 341 SA_prom[i] = inb(ioaddr + NE_DATAPORT); 342 343 /* We always set the 8390 registers for word mode. */ 344 outb(0x49, ioaddr + EN0_DCFG); 345 start_page = NESM_START_PG; 346 347 stop_page = flags & STOP_PG_0x60 ? 0x60 : NESM_STOP_PG; 348 349 /* Set up the rest of the parameters. */ 350 dev->irq = irq; 351 dev->base_addr = ioaddr; 352 pci_set_drvdata(pdev, dev); 353 354 ei_status.name = pci_clone_list[chip_idx].name; 355 ei_status.tx_start_page = start_page; 356 ei_status.stop_page = stop_page; 357 ei_status.word16 = 1; 358 ei_status.ne2k_flags = flags; 359 if (fnd_cnt < MAX_UNITS) { 360 if (full_duplex[fnd_cnt] > 0 || (options[fnd_cnt] & FORCE_FDX)) 361 ei_status.ne2k_flags |= FORCE_FDX; 362 } 363 364 ei_status.rx_start_page = start_page + TX_PAGES; 365 #ifdef PACKETBUF_MEMSIZE 366 /* Allow the packet buffer size to be overridden by know-it-alls. */ 367 ei_status.stop_page = ei_status.tx_start_page + PACKETBUF_MEMSIZE; 368 #endif 369 370 ei_status.reset_8390 = &ne2k_pci_reset_8390; 371 ei_status.block_input = &ne2k_pci_block_input; 372 ei_status.block_output = &ne2k_pci_block_output; 373 ei_status.get_8390_hdr = &ne2k_pci_get_8390_hdr; 374 ei_status.priv = (unsigned long) pdev; 375 376 dev->ethtool_ops = &ne2k_pci_ethtool_ops; 377 NS8390_init(dev, 0); 378 379 memcpy(dev->dev_addr, SA_prom, dev->addr_len); 380 381 i = register_netdev(dev); 382 if (i) 383 goto err_out_free_netdev; 384 385 netdev_info(dev, "%s found at %#lx, IRQ %d, %pM.\n", 386 pci_clone_list[chip_idx].name, ioaddr, dev->irq, 387 dev->dev_addr); 388 389 return 0; 390 391 err_out_free_netdev: 392 free_netdev (dev); 393 err_out_free_res: 394 release_region (ioaddr, NE_IO_EXTENT); 395 return -ENODEV; 396 } 397 398 /* 399 * Magic incantation sequence for full duplex on the supported cards. 400 */ 401 static inline int set_realtek_fdx(struct net_device *dev) 402 { 403 long ioaddr = dev->base_addr; 404 405 outb(0xC0 + E8390_NODMA, ioaddr + NE_CMD); /* Page 3 */ 406 outb(0xC0, ioaddr + 0x01); /* Enable writes to CONFIG3 */ 407 outb(0x40, ioaddr + 0x06); /* Enable full duplex */ 408 outb(0x00, ioaddr + 0x01); /* Disable writes to CONFIG3 */ 409 outb(E8390_PAGE0 + E8390_NODMA, ioaddr + NE_CMD); /* Page 0 */ 410 return 0; 411 } 412 413 static inline int set_holtek_fdx(struct net_device *dev) 414 { 415 long ioaddr = dev->base_addr; 416 417 outb(inb(ioaddr + 0x20) | 0x80, ioaddr + 0x20); 418 return 0; 419 } 420 421 static int ne2k_pci_set_fdx(struct net_device *dev) 422 { 423 if (ei_status.ne2k_flags & REALTEK_FDX) 424 return set_realtek_fdx(dev); 425 else if (ei_status.ne2k_flags & HOLTEK_FDX) 426 return set_holtek_fdx(dev); 427 428 return -EOPNOTSUPP; 429 } 430 431 static int ne2k_pci_open(struct net_device *dev) 432 { 433 int ret = request_irq(dev->irq, ei_interrupt, IRQF_SHARED, dev->name, dev); 434 if (ret) 435 return ret; 436 437 if (ei_status.ne2k_flags & FORCE_FDX) 438 ne2k_pci_set_fdx(dev); 439 440 ei_open(dev); 441 return 0; 442 } 443 444 static int ne2k_pci_close(struct net_device *dev) 445 { 446 ei_close(dev); 447 free_irq(dev->irq, dev); 448 return 0; 449 } 450 451 /* Hard reset the card. This used to pause for the same period that a 452 8390 reset command required, but that shouldn't be necessary. */ 453 static void ne2k_pci_reset_8390(struct net_device *dev) 454 { 455 unsigned long reset_start_time = jiffies; 456 struct ei_device *ei_local = netdev_priv(dev); 457 458 netif_dbg(ei_local, hw, dev, "resetting the 8390 t=%ld...\n", 459 jiffies); 460 461 outb(inb(NE_BASE + NE_RESET), NE_BASE + NE_RESET); 462 463 ei_status.txing = 0; 464 ei_status.dmaing = 0; 465 466 /* This check _should_not_ be necessary, omit eventually. */ 467 while ((inb(NE_BASE+EN0_ISR) & ENISR_RESET) == 0) 468 if (jiffies - reset_start_time > 2) { 469 netdev_err(dev, "ne2k_pci_reset_8390() did not complete.\n"); 470 break; 471 } 472 outb(ENISR_RESET, NE_BASE + EN0_ISR); /* Ack intr. */ 473 } 474 475 /* Grab the 8390 specific header. Similar to the block_input routine, but 476 we don't need to be concerned with ring wrap as the header will be at 477 the start of a page, so we optimize accordingly. */ 478 479 static void ne2k_pci_get_8390_hdr(struct net_device *dev, struct e8390_pkt_hdr *hdr, int ring_page) 480 { 481 482 long nic_base = dev->base_addr; 483 484 /* This *shouldn't* happen. If it does, it's the last thing you'll see */ 485 if (ei_status.dmaing) { 486 netdev_err(dev, "DMAing conflict in ne2k_pci_get_8390_hdr " 487 "[DMAstat:%d][irqlock:%d].\n", 488 ei_status.dmaing, ei_status.irqlock); 489 return; 490 } 491 492 ei_status.dmaing |= 0x01; 493 outb(E8390_NODMA+E8390_PAGE0+E8390_START, nic_base+ NE_CMD); 494 outb(sizeof(struct e8390_pkt_hdr), nic_base + EN0_RCNTLO); 495 outb(0, nic_base + EN0_RCNTHI); 496 outb(0, nic_base + EN0_RSARLO); /* On page boundary */ 497 outb(ring_page, nic_base + EN0_RSARHI); 498 outb(E8390_RREAD+E8390_START, nic_base + NE_CMD); 499 500 if (ei_status.ne2k_flags & ONLY_16BIT_IO) { 501 insw(NE_BASE + NE_DATAPORT, hdr, sizeof(struct e8390_pkt_hdr)>>1); 502 } else { 503 *(u32*)hdr = le32_to_cpu(inl(NE_BASE + NE_DATAPORT)); 504 le16_to_cpus(&hdr->count); 505 } 506 507 outb(ENISR_RDC, nic_base + EN0_ISR); /* Ack intr. */ 508 ei_status.dmaing &= ~0x01; 509 } 510 511 /* Block input and output, similar to the Crynwr packet driver. If you 512 are porting to a new ethercard, look at the packet driver source for hints. 513 The NEx000 doesn't share the on-board packet memory -- you have to put 514 the packet out through the "remote DMA" dataport using outb. */ 515 516 static void ne2k_pci_block_input(struct net_device *dev, int count, 517 struct sk_buff *skb, int ring_offset) 518 { 519 long nic_base = dev->base_addr; 520 char *buf = skb->data; 521 522 /* This *shouldn't* happen. If it does, it's the last thing you'll see */ 523 if (ei_status.dmaing) { 524 netdev_err(dev, "DMAing conflict in ne2k_pci_block_input " 525 "[DMAstat:%d][irqlock:%d].\n", 526 ei_status.dmaing, ei_status.irqlock); 527 return; 528 } 529 ei_status.dmaing |= 0x01; 530 if (ei_status.ne2k_flags & ONLY_32BIT_IO) 531 count = (count + 3) & 0xFFFC; 532 outb(E8390_NODMA+E8390_PAGE0+E8390_START, nic_base+ NE_CMD); 533 outb(count & 0xff, nic_base + EN0_RCNTLO); 534 outb(count >> 8, nic_base + EN0_RCNTHI); 535 outb(ring_offset & 0xff, nic_base + EN0_RSARLO); 536 outb(ring_offset >> 8, nic_base + EN0_RSARHI); 537 outb(E8390_RREAD+E8390_START, nic_base + NE_CMD); 538 539 if (ei_status.ne2k_flags & ONLY_16BIT_IO) { 540 insw(NE_BASE + NE_DATAPORT,buf,count>>1); 541 if (count & 0x01) { 542 buf[count-1] = inb(NE_BASE + NE_DATAPORT); 543 } 544 } else { 545 insl(NE_BASE + NE_DATAPORT, buf, count>>2); 546 if (count & 3) { 547 buf += count & ~3; 548 if (count & 2) { 549 __le16 *b = (__le16 *)buf; 550 551 *b++ = cpu_to_le16(inw(NE_BASE + NE_DATAPORT)); 552 buf = (char *)b; 553 } 554 if (count & 1) 555 *buf = inb(NE_BASE + NE_DATAPORT); 556 } 557 } 558 559 outb(ENISR_RDC, nic_base + EN0_ISR); /* Ack intr. */ 560 ei_status.dmaing &= ~0x01; 561 } 562 563 static void ne2k_pci_block_output(struct net_device *dev, int count, 564 const unsigned char *buf, const int start_page) 565 { 566 long nic_base = NE_BASE; 567 unsigned long dma_start; 568 569 /* On little-endian it's always safe to round the count up for 570 word writes. */ 571 if (ei_status.ne2k_flags & ONLY_32BIT_IO) 572 count = (count + 3) & 0xFFFC; 573 else 574 if (count & 0x01) 575 count++; 576 577 /* This *shouldn't* happen. If it does, it's the last thing you'll see */ 578 if (ei_status.dmaing) { 579 netdev_err(dev, "DMAing conflict in ne2k_pci_block_output." 580 "[DMAstat:%d][irqlock:%d]\n", 581 ei_status.dmaing, ei_status.irqlock); 582 return; 583 } 584 ei_status.dmaing |= 0x01; 585 /* We should already be in page 0, but to be safe... */ 586 outb(E8390_PAGE0+E8390_START+E8390_NODMA, nic_base + NE_CMD); 587 588 #ifdef NE8390_RW_BUGFIX 589 /* Handle the read-before-write bug the same way as the 590 Crynwr packet driver -- the NatSemi method doesn't work. 591 Actually this doesn't always work either, but if you have 592 problems with your NEx000 this is better than nothing! */ 593 outb(0x42, nic_base + EN0_RCNTLO); 594 outb(0x00, nic_base + EN0_RCNTHI); 595 outb(0x42, nic_base + EN0_RSARLO); 596 outb(0x00, nic_base + EN0_RSARHI); 597 outb(E8390_RREAD+E8390_START, nic_base + NE_CMD); 598 #endif 599 outb(ENISR_RDC, nic_base + EN0_ISR); 600 601 /* Now the normal output. */ 602 outb(count & 0xff, nic_base + EN0_RCNTLO); 603 outb(count >> 8, nic_base + EN0_RCNTHI); 604 outb(0x00, nic_base + EN0_RSARLO); 605 outb(start_page, nic_base + EN0_RSARHI); 606 outb(E8390_RWRITE+E8390_START, nic_base + NE_CMD); 607 if (ei_status.ne2k_flags & ONLY_16BIT_IO) { 608 outsw(NE_BASE + NE_DATAPORT, buf, count>>1); 609 } else { 610 outsl(NE_BASE + NE_DATAPORT, buf, count>>2); 611 if (count & 3) { 612 buf += count & ~3; 613 if (count & 2) { 614 __le16 *b = (__le16 *)buf; 615 616 outw(le16_to_cpu(*b++), NE_BASE + NE_DATAPORT); 617 buf = (char *)b; 618 } 619 } 620 } 621 622 dma_start = jiffies; 623 624 while ((inb(nic_base + EN0_ISR) & ENISR_RDC) == 0) 625 if (jiffies - dma_start > 2) { /* Avoid clock roll-over. */ 626 netdev_warn(dev, "timeout waiting for Tx RDC.\n"); 627 ne2k_pci_reset_8390(dev); 628 NS8390_init(dev,1); 629 break; 630 } 631 632 outb(ENISR_RDC, nic_base + EN0_ISR); /* Ack intr. */ 633 ei_status.dmaing &= ~0x01; 634 } 635 636 static void ne2k_pci_get_drvinfo(struct net_device *dev, 637 struct ethtool_drvinfo *info) 638 { 639 struct ei_device *ei = netdev_priv(dev); 640 struct pci_dev *pci_dev = (struct pci_dev *) ei->priv; 641 642 strlcpy(info->driver, DRV_NAME, sizeof(info->driver)); 643 strlcpy(info->version, DRV_VERSION, sizeof(info->version)); 644 strlcpy(info->bus_info, pci_name(pci_dev), sizeof(info->bus_info)); 645 } 646 647 static u32 ne2k_pci_get_msglevel(struct net_device *dev) 648 { 649 struct ei_device *ei_local = netdev_priv(dev); 650 651 return ei_local->msg_enable; 652 } 653 654 static void ne2k_pci_set_msglevel(struct net_device *dev, u32 v) 655 { 656 struct ei_device *ei_local = netdev_priv(dev); 657 658 ei_local->msg_enable = v; 659 } 660 661 static const struct ethtool_ops ne2k_pci_ethtool_ops = { 662 .get_drvinfo = ne2k_pci_get_drvinfo, 663 .get_msglevel = ne2k_pci_get_msglevel, 664 .set_msglevel = ne2k_pci_set_msglevel, 665 }; 666 667 static void ne2k_pci_remove_one(struct pci_dev *pdev) 668 { 669 struct net_device *dev = pci_get_drvdata(pdev); 670 671 BUG_ON(!dev); 672 unregister_netdev(dev); 673 release_region(dev->base_addr, NE_IO_EXTENT); 674 free_netdev(dev); 675 pci_disable_device(pdev); 676 } 677 678 #ifdef CONFIG_PM 679 static int ne2k_pci_suspend (struct pci_dev *pdev, pm_message_t state) 680 { 681 struct net_device *dev = pci_get_drvdata (pdev); 682 683 netif_device_detach(dev); 684 pci_save_state(pdev); 685 pci_disable_device(pdev); 686 pci_set_power_state(pdev, pci_choose_state(pdev, state)); 687 688 return 0; 689 } 690 691 static int ne2k_pci_resume (struct pci_dev *pdev) 692 { 693 struct net_device *dev = pci_get_drvdata (pdev); 694 int rc; 695 696 pci_set_power_state(pdev, PCI_D0); 697 pci_restore_state(pdev); 698 699 rc = pci_enable_device(pdev); 700 if (rc) 701 return rc; 702 703 NS8390_init(dev, 1); 704 netif_device_attach(dev); 705 706 return 0; 707 } 708 709 #endif /* CONFIG_PM */ 710 711 712 static struct pci_driver ne2k_driver = { 713 .name = DRV_NAME, 714 .probe = ne2k_pci_init_one, 715 .remove = ne2k_pci_remove_one, 716 .id_table = ne2k_pci_tbl, 717 #ifdef CONFIG_PM 718 .suspend = ne2k_pci_suspend, 719 .resume = ne2k_pci_resume, 720 #endif /* CONFIG_PM */ 721 722 }; 723 724 725 static int __init ne2k_pci_init(void) 726 { 727 /* when a module, this is printed whether or not devices are found in probe */ 728 #ifdef MODULE 729 printk(version); 730 #endif 731 return pci_register_driver(&ne2k_driver); 732 } 733 734 735 static void __exit ne2k_pci_cleanup(void) 736 { 737 pci_unregister_driver (&ne2k_driver); 738 } 739 740 module_init(ne2k_pci_init); 741 module_exit(ne2k_pci_cleanup); 742