1 /* 2 * Support for ColdFire CPU based boards using a NS8390 Ethernet device. 3 * 4 * Derived from the many other 8390 drivers. 5 * 6 * (C) Copyright 2012, Greg Ungerer <gerg@uclinux.org> 7 * 8 * This file is subject to the terms and conditions of the GNU General Public 9 * License. See the file COPYING in the main directory of the Linux 10 * distribution for more details. 11 */ 12 13 #include <linux/module.h> 14 #include <linux/kernel.h> 15 #include <linux/errno.h> 16 #include <linux/init.h> 17 #include <linux/platform_device.h> 18 #include <linux/netdevice.h> 19 #include <linux/etherdevice.h> 20 #include <linux/jiffies.h> 21 #include <linux/io.h> 22 #include <asm/mcf8390.h> 23 24 static const char version[] = 25 "mcf8390.c: (15-06-2012) Greg Ungerer <gerg@uclinux.org>"; 26 27 #define NE_CMD 0x00 28 #define NE_DATAPORT 0x10 /* NatSemi-defined port window offset */ 29 #define NE_RESET 0x1f /* Issue a read to reset ,a write to clear */ 30 #define NE_EN0_ISR 0x07 31 #define NE_EN0_DCFG 0x0e 32 #define NE_EN0_RSARLO 0x08 33 #define NE_EN0_RSARHI 0x09 34 #define NE_EN0_RCNTLO 0x0a 35 #define NE_EN0_RXCR 0x0c 36 #define NE_EN0_TXCR 0x0d 37 #define NE_EN0_RCNTHI 0x0b 38 #define NE_EN0_IMR 0x0f 39 40 #define NESM_START_PG 0x40 /* First page of TX buffer */ 41 #define NESM_STOP_PG 0x80 /* Last page +1 of RX ring */ 42 43 #ifdef NE2000_ODDOFFSET 44 /* 45 * A lot of the ColdFire boards use a separate address region for odd offset 46 * register addresses. The following functions convert and map as required. 47 * Note that the data port accesses are treated a little differently, and 48 * always accessed via the insX/outsX functions. 49 */ 50 static inline u32 NE_PTR(u32 addr) 51 { 52 if (addr & 1) 53 return addr - 1 + NE2000_ODDOFFSET; 54 return addr; 55 } 56 57 static inline u32 NE_DATA_PTR(u32 addr) 58 { 59 return addr; 60 } 61 62 void ei_outb(u32 val, u32 addr) 63 { 64 NE2000_BYTE *rp; 65 66 rp = (NE2000_BYTE *) NE_PTR(addr); 67 *rp = RSWAP(val); 68 } 69 70 #define ei_inb ei_inb 71 u8 ei_inb(u32 addr) 72 { 73 NE2000_BYTE *rp, val; 74 75 rp = (NE2000_BYTE *) NE_PTR(addr); 76 val = *rp; 77 return (u8) (RSWAP(val) & 0xff); 78 } 79 80 void ei_insb(u32 addr, void *vbuf, int len) 81 { 82 NE2000_BYTE *rp, val; 83 u8 *buf; 84 85 buf = (u8 *) vbuf; 86 rp = (NE2000_BYTE *) NE_DATA_PTR(addr); 87 for (; (len > 0); len--) { 88 val = *rp; 89 *buf++ = RSWAP(val); 90 } 91 } 92 93 void ei_insw(u32 addr, void *vbuf, int len) 94 { 95 volatile u16 *rp; 96 u16 w, *buf; 97 98 buf = (u16 *) vbuf; 99 rp = (volatile u16 *) NE_DATA_PTR(addr); 100 for (; (len > 0); len--) { 101 w = *rp; 102 *buf++ = BSWAP(w); 103 } 104 } 105 106 void ei_outsb(u32 addr, const void *vbuf, int len) 107 { 108 NE2000_BYTE *rp, val; 109 u8 *buf; 110 111 buf = (u8 *) vbuf; 112 rp = (NE2000_BYTE *) NE_DATA_PTR(addr); 113 for (; (len > 0); len--) { 114 val = *buf++; 115 *rp = RSWAP(val); 116 } 117 } 118 119 void ei_outsw(u32 addr, const void *vbuf, int len) 120 { 121 volatile u16 *rp; 122 u16 w, *buf; 123 124 buf = (u16 *) vbuf; 125 rp = (volatile u16 *) NE_DATA_PTR(addr); 126 for (; (len > 0); len--) { 127 w = *buf++; 128 *rp = BSWAP(w); 129 } 130 } 131 132 #else /* !NE2000_ODDOFFSET */ 133 134 #define ei_inb inb 135 #define ei_outb outb 136 #define ei_insb insb 137 #define ei_insw insw 138 #define ei_outsb outsb 139 #define ei_outsw outsw 140 141 #endif /* !NE2000_ODDOFFSET */ 142 143 #define ei_inb_p ei_inb 144 #define ei_outb_p ei_outb 145 146 #include "lib8390.c" 147 148 /* 149 * Hard reset the card. This used to pause for the same period that a 150 * 8390 reset command required, but that shouldn't be necessary. 151 */ 152 static void mcf8390_reset_8390(struct net_device *dev) 153 { 154 unsigned long reset_start_time = jiffies; 155 u32 addr = dev->base_addr; 156 157 if (ei_debug > 1) 158 netdev_dbg(dev, "resetting the 8390 t=%ld...\n", jiffies); 159 160 ei_outb(ei_inb(addr + NE_RESET), addr + NE_RESET); 161 162 ei_status.txing = 0; 163 ei_status.dmaing = 0; 164 165 /* This check _should_not_ be necessary, omit eventually. */ 166 while ((ei_inb(addr + NE_EN0_ISR) & ENISR_RESET) == 0) { 167 if (time_after(jiffies, reset_start_time + 2 * HZ / 100)) { 168 netdev_warn(dev, "%s: did not complete\n", __func__); 169 break; 170 } 171 } 172 173 ei_outb(ENISR_RESET, addr + NE_EN0_ISR); 174 } 175 176 /* 177 * This *shouldn't* happen. 178 * If it does, it's the last thing you'll see 179 */ 180 static void mcf8390_dmaing_err(const char *func, struct net_device *dev, 181 struct ei_device *ei_local) 182 { 183 netdev_err(dev, "%s: DMAing conflict [DMAstat:%d][irqlock:%d]\n", 184 func, ei_local->dmaing, ei_local->irqlock); 185 } 186 187 /* 188 * Grab the 8390 specific header. Similar to the block_input routine, but 189 * we don't need to be concerned with ring wrap as the header will be at 190 * the start of a page, so we optimize accordingly. 191 */ 192 static void mcf8390_get_8390_hdr(struct net_device *dev, 193 struct e8390_pkt_hdr *hdr, int ring_page) 194 { 195 struct ei_device *ei_local = netdev_priv(dev); 196 u32 addr = dev->base_addr; 197 198 if (ei_local->dmaing) { 199 mcf8390_dmaing_err(__func__, dev, ei_local); 200 return; 201 } 202 203 ei_local->dmaing |= 0x01; 204 ei_outb(E8390_NODMA + E8390_PAGE0 + E8390_START, addr + NE_CMD); 205 ei_outb(ENISR_RDC, addr + NE_EN0_ISR); 206 ei_outb(sizeof(struct e8390_pkt_hdr), addr + NE_EN0_RCNTLO); 207 ei_outb(0, addr + NE_EN0_RCNTHI); 208 ei_outb(0, addr + NE_EN0_RSARLO); /* On page boundary */ 209 ei_outb(ring_page, addr + NE_EN0_RSARHI); 210 ei_outb(E8390_RREAD + E8390_START, addr + NE_CMD); 211 212 ei_insw(addr + NE_DATAPORT, hdr, sizeof(struct e8390_pkt_hdr) >> 1); 213 214 outb(ENISR_RDC, addr + NE_EN0_ISR); /* Ack intr */ 215 ei_local->dmaing &= ~0x01; 216 217 hdr->count = cpu_to_le16(hdr->count); 218 } 219 220 /* 221 * Block input and output, similar to the Crynwr packet driver. 222 * If you are porting to a new ethercard, look at the packet driver source 223 * for hints. The NEx000 doesn't share the on-board packet memory -- 224 * you have to put the packet out through the "remote DMA" dataport 225 * using z_writeb. 226 */ 227 static void mcf8390_block_input(struct net_device *dev, int count, 228 struct sk_buff *skb, int ring_offset) 229 { 230 struct ei_device *ei_local = netdev_priv(dev); 231 u32 addr = dev->base_addr; 232 char *buf = skb->data; 233 234 if (ei_local->dmaing) { 235 mcf8390_dmaing_err(__func__, dev, ei_local); 236 return; 237 } 238 239 ei_local->dmaing |= 0x01; 240 ei_outb(E8390_NODMA + E8390_PAGE0 + E8390_START, addr + NE_CMD); 241 ei_outb(ENISR_RDC, addr + NE_EN0_ISR); 242 ei_outb(count & 0xff, addr + NE_EN0_RCNTLO); 243 ei_outb(count >> 8, addr + NE_EN0_RCNTHI); 244 ei_outb(ring_offset & 0xff, addr + NE_EN0_RSARLO); 245 ei_outb(ring_offset >> 8, addr + NE_EN0_RSARHI); 246 ei_outb(E8390_RREAD + E8390_START, addr + NE_CMD); 247 248 ei_insw(addr + NE_DATAPORT, buf, count >> 1); 249 if (count & 1) 250 buf[count - 1] = ei_inb(addr + NE_DATAPORT); 251 252 ei_outb(ENISR_RDC, addr + NE_EN0_ISR); /* Ack intr */ 253 ei_local->dmaing &= ~0x01; 254 } 255 256 static void mcf8390_block_output(struct net_device *dev, int count, 257 const unsigned char *buf, 258 const int start_page) 259 { 260 struct ei_device *ei_local = netdev_priv(dev); 261 u32 addr = dev->base_addr; 262 unsigned long dma_start; 263 264 /* Make sure we transfer all bytes if 16bit IO writes */ 265 if (count & 0x1) 266 count++; 267 268 if (ei_local->dmaing) { 269 mcf8390_dmaing_err(__func__, dev, ei_local); 270 return; 271 } 272 273 ei_local->dmaing |= 0x01; 274 /* We should already be in page 0, but to be safe... */ 275 ei_outb(E8390_PAGE0 + E8390_START + E8390_NODMA, addr + NE_CMD); 276 277 ei_outb(ENISR_RDC, addr + NE_EN0_ISR); 278 279 /* Now the normal output. */ 280 ei_outb(count & 0xff, addr + NE_EN0_RCNTLO); 281 ei_outb(count >> 8, addr + NE_EN0_RCNTHI); 282 ei_outb(0x00, addr + NE_EN0_RSARLO); 283 ei_outb(start_page, addr + NE_EN0_RSARHI); 284 ei_outb(E8390_RWRITE + E8390_START, addr + NE_CMD); 285 286 ei_outsw(addr + NE_DATAPORT, buf, count >> 1); 287 288 dma_start = jiffies; 289 while ((ei_inb(addr + NE_EN0_ISR) & ENISR_RDC) == 0) { 290 if (time_after(jiffies, dma_start + 2 * HZ / 100)) { /* 20ms */ 291 netdev_err(dev, "timeout waiting for Tx RDC\n"); 292 mcf8390_reset_8390(dev); 293 __NS8390_init(dev, 1); 294 break; 295 } 296 } 297 298 ei_outb(ENISR_RDC, addr + NE_EN0_ISR); /* Ack intr */ 299 ei_local->dmaing &= ~0x01; 300 } 301 302 static const struct net_device_ops mcf8390_netdev_ops = { 303 .ndo_open = __ei_open, 304 .ndo_stop = __ei_close, 305 .ndo_start_xmit = __ei_start_xmit, 306 .ndo_tx_timeout = __ei_tx_timeout, 307 .ndo_get_stats = __ei_get_stats, 308 .ndo_set_rx_mode = __ei_set_multicast_list, 309 .ndo_validate_addr = eth_validate_addr, 310 .ndo_set_mac_address = eth_mac_addr, 311 .ndo_change_mtu = eth_change_mtu, 312 #ifdef CONFIG_NET_POLL_CONTROLLER 313 .ndo_poll_controller = __ei_poll, 314 #endif 315 }; 316 317 static int mcf8390_init(struct net_device *dev) 318 { 319 static u32 offsets[] = { 320 0x00, 0x01, 0x02, 0x03, 0x04, 0x05, 0x06, 0x07, 321 0x08, 0x09, 0x0a, 0x0b, 0x0c, 0x0d, 0x0e, 0x0f, 322 }; 323 struct ei_device *ei_local = netdev_priv(dev); 324 unsigned char SA_prom[32]; 325 u32 addr = dev->base_addr; 326 int start_page, stop_page; 327 int i, ret; 328 329 mcf8390_reset_8390(dev); 330 331 /* 332 * Read the 16 bytes of station address PROM. 333 * We must first initialize registers, 334 * similar to NS8390_init(eifdev, 0). 335 * We can't reliably read the SAPROM address without this. 336 * (I learned the hard way!). 337 */ 338 { 339 static const struct { 340 u32 value; 341 u32 offset; 342 } program_seq[] = { 343 {E8390_NODMA + E8390_PAGE0 + E8390_STOP, NE_CMD}, 344 /* Select page 0 */ 345 {0x48, NE_EN0_DCFG}, /* 0x48: Set byte-wide access */ 346 {0x00, NE_EN0_RCNTLO}, /* Clear the count regs */ 347 {0x00, NE_EN0_RCNTHI}, 348 {0x00, NE_EN0_IMR}, /* Mask completion irq */ 349 {0xFF, NE_EN0_ISR}, 350 {E8390_RXOFF, NE_EN0_RXCR}, /* 0x20 Set to monitor */ 351 {E8390_TXOFF, NE_EN0_TXCR}, /* 0x02 and loopback mode */ 352 {32, NE_EN0_RCNTLO}, 353 {0x00, NE_EN0_RCNTHI}, 354 {0x00, NE_EN0_RSARLO}, /* DMA starting at 0x0000 */ 355 {0x00, NE_EN0_RSARHI}, 356 {E8390_RREAD + E8390_START, NE_CMD}, 357 }; 358 for (i = 0; i < ARRAY_SIZE(program_seq); i++) { 359 ei_outb(program_seq[i].value, 360 addr + program_seq[i].offset); 361 } 362 } 363 364 for (i = 0; i < 16; i++) { 365 SA_prom[i] = ei_inb(addr + NE_DATAPORT); 366 ei_inb(addr + NE_DATAPORT); 367 } 368 369 /* We must set the 8390 for word mode. */ 370 ei_outb(0x49, addr + NE_EN0_DCFG); 371 start_page = NESM_START_PG; 372 stop_page = NESM_STOP_PG; 373 374 /* Install the Interrupt handler */ 375 ret = request_irq(dev->irq, __ei_interrupt, 0, dev->name, dev); 376 if (ret) 377 return ret; 378 379 for (i = 0; i < ETH_ALEN; i++) 380 dev->dev_addr[i] = SA_prom[i]; 381 382 netdev_dbg(dev, "Found ethernet address: %pM\n", dev->dev_addr); 383 384 ei_local->name = "mcf8390"; 385 ei_local->tx_start_page = start_page; 386 ei_local->stop_page = stop_page; 387 ei_local->word16 = 1; 388 ei_local->rx_start_page = start_page + TX_PAGES; 389 ei_local->reset_8390 = mcf8390_reset_8390; 390 ei_local->block_input = mcf8390_block_input; 391 ei_local->block_output = mcf8390_block_output; 392 ei_local->get_8390_hdr = mcf8390_get_8390_hdr; 393 ei_local->reg_offset = offsets; 394 395 dev->netdev_ops = &mcf8390_netdev_ops; 396 __NS8390_init(dev, 0); 397 ret = register_netdev(dev); 398 if (ret) { 399 free_irq(dev->irq, dev); 400 return ret; 401 } 402 403 netdev_info(dev, "addr=0x%08x irq=%d, Ethernet Address %pM\n", 404 addr, dev->irq, dev->dev_addr); 405 return 0; 406 } 407 408 static int mcf8390_probe(struct platform_device *pdev) 409 { 410 struct net_device *dev; 411 struct ei_device *ei_local; 412 struct resource *mem, *irq; 413 resource_size_t msize; 414 int ret; 415 416 irq = platform_get_resource(pdev, IORESOURCE_IRQ, 0); 417 if (irq == NULL) { 418 dev_err(&pdev->dev, "no IRQ specified?\n"); 419 return -ENXIO; 420 } 421 422 mem = platform_get_resource(pdev, IORESOURCE_MEM, 0); 423 if (mem == NULL) { 424 dev_err(&pdev->dev, "no memory address specified?\n"); 425 return -ENXIO; 426 } 427 msize = resource_size(mem); 428 if (!request_mem_region(mem->start, msize, pdev->name)) 429 return -EBUSY; 430 431 dev = ____alloc_ei_netdev(0); 432 if (dev == NULL) { 433 release_mem_region(mem->start, msize); 434 return -ENOMEM; 435 } 436 437 SET_NETDEV_DEV(dev, &pdev->dev); 438 platform_set_drvdata(pdev, dev); 439 ei_local = netdev_priv(dev); 440 441 dev->irq = irq->start; 442 dev->base_addr = mem->start; 443 444 ret = mcf8390_init(dev); 445 if (ret) { 446 release_mem_region(mem->start, msize); 447 free_netdev(dev); 448 return ret; 449 } 450 return 0; 451 } 452 453 static int mcf8390_remove(struct platform_device *pdev) 454 { 455 struct net_device *dev = platform_get_drvdata(pdev); 456 struct resource *mem; 457 458 unregister_netdev(dev); 459 mem = platform_get_resource(pdev, IORESOURCE_MEM, 0); 460 if (mem) 461 release_mem_region(mem->start, resource_size(mem)); 462 free_netdev(dev); 463 return 0; 464 } 465 466 static struct platform_driver mcf8390_drv = { 467 .driver = { 468 .name = "mcf8390", 469 .owner = THIS_MODULE, 470 }, 471 .probe = mcf8390_probe, 472 .remove = mcf8390_remove, 473 }; 474 475 module_platform_driver(mcf8390_drv); 476 477 MODULE_DESCRIPTION("MCF8390 ColdFire NS8390 driver"); 478 MODULE_AUTHOR("Greg Ungerer <gerg@uclinux.org>"); 479 MODULE_LICENSE("GPL"); 480 MODULE_ALIAS("platform:mcf8390"); 481