1 /* drivers/net/ethernet/8390/ax88796.c 2 * 3 * Copyright 2005,2007 Simtec Electronics 4 * Ben Dooks <ben@simtec.co.uk> 5 * 6 * Asix AX88796 10/100 Ethernet controller support 7 * Based on ne.c, by Donald Becker, et-al. 8 * 9 * This program is free software; you can redistribute it and/or modify 10 * it under the terms of the GNU General Public License version 2 as 11 * published by the Free Software Foundation. 12 */ 13 14 #include <linux/module.h> 15 #include <linux/kernel.h> 16 #include <linux/errno.h> 17 #include <linux/isapnp.h> 18 #include <linux/init.h> 19 #include <linux/interrupt.h> 20 #include <linux/io.h> 21 #include <linux/platform_device.h> 22 #include <linux/delay.h> 23 #include <linux/timer.h> 24 #include <linux/netdevice.h> 25 #include <linux/etherdevice.h> 26 #include <linux/ethtool.h> 27 #include <linux/mdio-bitbang.h> 28 #include <linux/phy.h> 29 #include <linux/eeprom_93cx6.h> 30 #include <linux/slab.h> 31 32 #include <net/ax88796.h> 33 34 35 /* Rename the lib8390.c functions to show that they are in this driver */ 36 #define __ei_open ax_ei_open 37 #define __ei_close ax_ei_close 38 #define __ei_poll ax_ei_poll 39 #define __ei_start_xmit ax_ei_start_xmit 40 #define __ei_tx_timeout ax_ei_tx_timeout 41 #define __ei_get_stats ax_ei_get_stats 42 #define __ei_set_multicast_list ax_ei_set_multicast_list 43 #define __ei_interrupt ax_ei_interrupt 44 #define ____alloc_ei_netdev ax__alloc_ei_netdev 45 #define __NS8390_init ax_NS8390_init 46 47 /* force unsigned long back to 'void __iomem *' */ 48 #define ax_convert_addr(_a) ((void __force __iomem *)(_a)) 49 50 #define ei_inb(_a) readb(ax_convert_addr(_a)) 51 #define ei_outb(_v, _a) writeb(_v, ax_convert_addr(_a)) 52 53 #define ei_inb_p(_a) ei_inb(_a) 54 #define ei_outb_p(_v, _a) ei_outb(_v, _a) 55 56 /* define EI_SHIFT() to take into account our register offsets */ 57 #define EI_SHIFT(x) (ei_local->reg_offset[(x)]) 58 59 /* Ensure we have our RCR base value */ 60 #define AX88796_PLATFORM 61 62 static unsigned char version[] = "ax88796.c: Copyright 2005,2007 Simtec Electronics\n"; 63 64 #include "lib8390.c" 65 66 #define DRV_NAME "ax88796" 67 #define DRV_VERSION "1.00" 68 69 /* from ne.c */ 70 #define NE_CMD EI_SHIFT(0x00) 71 #define NE_RESET EI_SHIFT(0x1f) 72 #define NE_DATAPORT EI_SHIFT(0x10) 73 74 #define NE1SM_START_PG 0x20 /* First page of TX buffer */ 75 #define NE1SM_STOP_PG 0x40 /* Last page +1 of RX ring */ 76 #define NESM_START_PG 0x40 /* First page of TX buffer */ 77 #define NESM_STOP_PG 0x80 /* Last page +1 of RX ring */ 78 79 #define AX_GPOC_PPDSET BIT(6) 80 81 /* device private data */ 82 83 struct ax_device { 84 struct mii_bus *mii_bus; 85 struct mdiobb_ctrl bb_ctrl; 86 struct phy_device *phy_dev; 87 void __iomem *addr_memr; 88 u8 reg_memr; 89 int link; 90 int speed; 91 int duplex; 92 93 void __iomem *map2; 94 const struct ax_plat_data *plat; 95 96 unsigned char running; 97 unsigned char resume_open; 98 unsigned int irqflags; 99 100 u32 reg_offsets[0x20]; 101 }; 102 103 static inline struct ax_device *to_ax_dev(struct net_device *dev) 104 { 105 struct ei_device *ei_local = netdev_priv(dev); 106 return (struct ax_device *)(ei_local + 1); 107 } 108 109 /* 110 * ax_initial_check 111 * 112 * do an initial probe for the card to check wether it exists 113 * and is functional 114 */ 115 static int ax_initial_check(struct net_device *dev) 116 { 117 struct ei_device *ei_local = netdev_priv(dev); 118 void __iomem *ioaddr = ei_local->mem; 119 int reg0; 120 int regd; 121 122 reg0 = ei_inb(ioaddr); 123 if (reg0 == 0xFF) 124 return -ENODEV; 125 126 ei_outb(E8390_NODMA + E8390_PAGE1 + E8390_STOP, ioaddr + E8390_CMD); 127 regd = ei_inb(ioaddr + 0x0d); 128 ei_outb(0xff, ioaddr + 0x0d); 129 ei_outb(E8390_NODMA + E8390_PAGE0, ioaddr + E8390_CMD); 130 ei_inb(ioaddr + EN0_COUNTER0); /* Clear the counter by reading. */ 131 if (ei_inb(ioaddr + EN0_COUNTER0) != 0) { 132 ei_outb(reg0, ioaddr); 133 ei_outb(regd, ioaddr + 0x0d); /* Restore the old values. */ 134 return -ENODEV; 135 } 136 137 return 0; 138 } 139 140 /* 141 * Hard reset the card. This used to pause for the same period that a 142 * 8390 reset command required, but that shouldn't be necessary. 143 */ 144 static void ax_reset_8390(struct net_device *dev) 145 { 146 struct ei_device *ei_local = netdev_priv(dev); 147 unsigned long reset_start_time = jiffies; 148 void __iomem *addr = (void __iomem *)dev->base_addr; 149 150 if (ei_debug > 1) 151 netdev_dbg(dev, "resetting the 8390 t=%ld\n", jiffies); 152 153 ei_outb(ei_inb(addr + NE_RESET), addr + NE_RESET); 154 155 ei_local->txing = 0; 156 ei_local->dmaing = 0; 157 158 /* This check _should_not_ be necessary, omit eventually. */ 159 while ((ei_inb(addr + EN0_ISR) & ENISR_RESET) == 0) { 160 if (jiffies - reset_start_time > 2 * HZ / 100) { 161 netdev_warn(dev, "%s: did not complete.\n", __func__); 162 break; 163 } 164 } 165 166 ei_outb(ENISR_RESET, addr + EN0_ISR); /* Ack intr. */ 167 } 168 169 170 static void ax_get_8390_hdr(struct net_device *dev, struct e8390_pkt_hdr *hdr, 171 int ring_page) 172 { 173 struct ei_device *ei_local = netdev_priv(dev); 174 void __iomem *nic_base = ei_local->mem; 175 176 /* This *shouldn't* happen. If it does, it's the last thing you'll see */ 177 if (ei_local->dmaing) { 178 netdev_err(dev, "DMAing conflict in %s " 179 "[DMAstat:%d][irqlock:%d].\n", 180 __func__, 181 ei_local->dmaing, ei_local->irqlock); 182 return; 183 } 184 185 ei_local->dmaing |= 0x01; 186 ei_outb(E8390_NODMA + E8390_PAGE0 + E8390_START, nic_base + NE_CMD); 187 ei_outb(sizeof(struct e8390_pkt_hdr), nic_base + EN0_RCNTLO); 188 ei_outb(0, nic_base + EN0_RCNTHI); 189 ei_outb(0, nic_base + EN0_RSARLO); /* On page boundary */ 190 ei_outb(ring_page, nic_base + EN0_RSARHI); 191 ei_outb(E8390_RREAD+E8390_START, nic_base + NE_CMD); 192 193 if (ei_local->word16) 194 readsw(nic_base + NE_DATAPORT, hdr, 195 sizeof(struct e8390_pkt_hdr) >> 1); 196 else 197 readsb(nic_base + NE_DATAPORT, hdr, 198 sizeof(struct e8390_pkt_hdr)); 199 200 ei_outb(ENISR_RDC, nic_base + EN0_ISR); /* Ack intr. */ 201 ei_local->dmaing &= ~0x01; 202 203 le16_to_cpus(&hdr->count); 204 } 205 206 207 /* 208 * Block input and output, similar to the Crynwr packet driver. If 209 * you are porting to a new ethercard, look at the packet driver 210 * source for hints. The NEx000 doesn't share the on-board packet 211 * memory -- you have to put the packet out through the "remote DMA" 212 * dataport using ei_outb. 213 */ 214 static void ax_block_input(struct net_device *dev, int count, 215 struct sk_buff *skb, int ring_offset) 216 { 217 struct ei_device *ei_local = netdev_priv(dev); 218 void __iomem *nic_base = ei_local->mem; 219 char *buf = skb->data; 220 221 if (ei_local->dmaing) { 222 netdev_err(dev, 223 "DMAing conflict in %s " 224 "[DMAstat:%d][irqlock:%d].\n", 225 __func__, 226 ei_local->dmaing, ei_local->irqlock); 227 return; 228 } 229 230 ei_local->dmaing |= 0x01; 231 232 ei_outb(E8390_NODMA+E8390_PAGE0+E8390_START, nic_base + NE_CMD); 233 ei_outb(count & 0xff, nic_base + EN0_RCNTLO); 234 ei_outb(count >> 8, nic_base + EN0_RCNTHI); 235 ei_outb(ring_offset & 0xff, nic_base + EN0_RSARLO); 236 ei_outb(ring_offset >> 8, nic_base + EN0_RSARHI); 237 ei_outb(E8390_RREAD+E8390_START, nic_base + NE_CMD); 238 239 if (ei_local->word16) { 240 readsw(nic_base + NE_DATAPORT, buf, count >> 1); 241 if (count & 0x01) 242 buf[count-1] = ei_inb(nic_base + NE_DATAPORT); 243 244 } else { 245 readsb(nic_base + NE_DATAPORT, buf, count); 246 } 247 248 ei_local->dmaing &= ~1; 249 } 250 251 static void ax_block_output(struct net_device *dev, int count, 252 const unsigned char *buf, const int start_page) 253 { 254 struct ei_device *ei_local = netdev_priv(dev); 255 void __iomem *nic_base = ei_local->mem; 256 unsigned long dma_start; 257 258 /* 259 * Round the count up for word writes. Do we need to do this? 260 * What effect will an odd byte count have on the 8390? I 261 * should check someday. 262 */ 263 if (ei_local->word16 && (count & 0x01)) 264 count++; 265 266 /* This *shouldn't* happen. If it does, it's the last thing you'll see */ 267 if (ei_local->dmaing) { 268 netdev_err(dev, "DMAing conflict in %s." 269 "[DMAstat:%d][irqlock:%d]\n", 270 __func__, 271 ei_local->dmaing, ei_local->irqlock); 272 return; 273 } 274 275 ei_local->dmaing |= 0x01; 276 /* We should already be in page 0, but to be safe... */ 277 ei_outb(E8390_PAGE0+E8390_START+E8390_NODMA, nic_base + NE_CMD); 278 279 ei_outb(ENISR_RDC, nic_base + EN0_ISR); 280 281 /* Now the normal output. */ 282 ei_outb(count & 0xff, nic_base + EN0_RCNTLO); 283 ei_outb(count >> 8, nic_base + EN0_RCNTHI); 284 ei_outb(0x00, nic_base + EN0_RSARLO); 285 ei_outb(start_page, nic_base + EN0_RSARHI); 286 287 ei_outb(E8390_RWRITE+E8390_START, nic_base + NE_CMD); 288 if (ei_local->word16) 289 writesw(nic_base + NE_DATAPORT, buf, count >> 1); 290 else 291 writesb(nic_base + NE_DATAPORT, buf, count); 292 293 dma_start = jiffies; 294 295 while ((ei_inb(nic_base + EN0_ISR) & ENISR_RDC) == 0) { 296 if (jiffies - dma_start > 2 * HZ / 100) { /* 20ms */ 297 netdev_warn(dev, "timeout waiting for Tx RDC.\n"); 298 ax_reset_8390(dev); 299 ax_NS8390_init(dev, 1); 300 break; 301 } 302 } 303 304 ei_outb(ENISR_RDC, nic_base + EN0_ISR); /* Ack intr. */ 305 ei_local->dmaing &= ~0x01; 306 } 307 308 /* definitions for accessing MII/EEPROM interface */ 309 310 #define AX_MEMR EI_SHIFT(0x14) 311 #define AX_MEMR_MDC BIT(0) 312 #define AX_MEMR_MDIR BIT(1) 313 #define AX_MEMR_MDI BIT(2) 314 #define AX_MEMR_MDO BIT(3) 315 #define AX_MEMR_EECS BIT(4) 316 #define AX_MEMR_EEI BIT(5) 317 #define AX_MEMR_EEO BIT(6) 318 #define AX_MEMR_EECLK BIT(7) 319 320 static void ax_handle_link_change(struct net_device *dev) 321 { 322 struct ax_device *ax = to_ax_dev(dev); 323 struct phy_device *phy_dev = ax->phy_dev; 324 int status_change = 0; 325 326 if (phy_dev->link && ((ax->speed != phy_dev->speed) || 327 (ax->duplex != phy_dev->duplex))) { 328 329 ax->speed = phy_dev->speed; 330 ax->duplex = phy_dev->duplex; 331 status_change = 1; 332 } 333 334 if (phy_dev->link != ax->link) { 335 if (!phy_dev->link) { 336 ax->speed = 0; 337 ax->duplex = -1; 338 } 339 ax->link = phy_dev->link; 340 341 status_change = 1; 342 } 343 344 if (status_change) 345 phy_print_status(phy_dev); 346 } 347 348 static int ax_mii_probe(struct net_device *dev) 349 { 350 struct ax_device *ax = to_ax_dev(dev); 351 struct phy_device *phy_dev = NULL; 352 int ret; 353 354 /* find the first phy */ 355 phy_dev = phy_find_first(ax->mii_bus); 356 if (!phy_dev) { 357 netdev_err(dev, "no PHY found\n"); 358 return -ENODEV; 359 } 360 361 ret = phy_connect_direct(dev, phy_dev, ax_handle_link_change, 0, 362 PHY_INTERFACE_MODE_MII); 363 if (ret) { 364 netdev_err(dev, "Could not attach to PHY\n"); 365 return ret; 366 } 367 368 /* mask with MAC supported features */ 369 phy_dev->supported &= PHY_BASIC_FEATURES; 370 phy_dev->advertising = phy_dev->supported; 371 372 ax->phy_dev = phy_dev; 373 374 netdev_info(dev, "PHY driver [%s] (mii_bus:phy_addr=%s, irq=%d)\n", 375 phy_dev->drv->name, dev_name(&phy_dev->dev), phy_dev->irq); 376 377 return 0; 378 } 379 380 static void ax_phy_switch(struct net_device *dev, int on) 381 { 382 struct ei_device *ei_local = netdev_priv(dev); 383 struct ax_device *ax = to_ax_dev(dev); 384 385 u8 reg_gpoc = ax->plat->gpoc_val; 386 387 if (!!on) 388 reg_gpoc &= ~AX_GPOC_PPDSET; 389 else 390 reg_gpoc |= AX_GPOC_PPDSET; 391 392 ei_outb(reg_gpoc, ei_local->mem + EI_SHIFT(0x17)); 393 } 394 395 static int ax_open(struct net_device *dev) 396 { 397 struct ax_device *ax = to_ax_dev(dev); 398 int ret; 399 400 netdev_dbg(dev, "open\n"); 401 402 ret = request_irq(dev->irq, ax_ei_interrupt, ax->irqflags, 403 dev->name, dev); 404 if (ret) 405 goto failed_request_irq; 406 407 /* turn the phy on (if turned off) */ 408 ax_phy_switch(dev, 1); 409 410 ret = ax_mii_probe(dev); 411 if (ret) 412 goto failed_mii_probe; 413 phy_start(ax->phy_dev); 414 415 ret = ax_ei_open(dev); 416 if (ret) 417 goto failed_ax_ei_open; 418 419 ax->running = 1; 420 421 return 0; 422 423 failed_ax_ei_open: 424 phy_disconnect(ax->phy_dev); 425 failed_mii_probe: 426 ax_phy_switch(dev, 0); 427 free_irq(dev->irq, dev); 428 failed_request_irq: 429 return ret; 430 } 431 432 static int ax_close(struct net_device *dev) 433 { 434 struct ax_device *ax = to_ax_dev(dev); 435 436 netdev_dbg(dev, "close\n"); 437 438 ax->running = 0; 439 wmb(); 440 441 ax_ei_close(dev); 442 443 /* turn the phy off */ 444 ax_phy_switch(dev, 0); 445 phy_disconnect(ax->phy_dev); 446 447 free_irq(dev->irq, dev); 448 return 0; 449 } 450 451 static int ax_ioctl(struct net_device *dev, struct ifreq *req, int cmd) 452 { 453 struct ax_device *ax = to_ax_dev(dev); 454 struct phy_device *phy_dev = ax->phy_dev; 455 456 if (!netif_running(dev)) 457 return -EINVAL; 458 459 if (!phy_dev) 460 return -ENODEV; 461 462 return phy_mii_ioctl(phy_dev, req, cmd); 463 } 464 465 /* ethtool ops */ 466 467 static void ax_get_drvinfo(struct net_device *dev, 468 struct ethtool_drvinfo *info) 469 { 470 struct platform_device *pdev = to_platform_device(dev->dev.parent); 471 472 strcpy(info->driver, DRV_NAME); 473 strcpy(info->version, DRV_VERSION); 474 strcpy(info->bus_info, pdev->name); 475 } 476 477 static int ax_get_settings(struct net_device *dev, struct ethtool_cmd *cmd) 478 { 479 struct ax_device *ax = to_ax_dev(dev); 480 struct phy_device *phy_dev = ax->phy_dev; 481 482 if (!phy_dev) 483 return -ENODEV; 484 485 return phy_ethtool_gset(phy_dev, cmd); 486 } 487 488 static int ax_set_settings(struct net_device *dev, struct ethtool_cmd *cmd) 489 { 490 struct ax_device *ax = to_ax_dev(dev); 491 struct phy_device *phy_dev = ax->phy_dev; 492 493 if (!phy_dev) 494 return -ENODEV; 495 496 return phy_ethtool_sset(phy_dev, cmd); 497 } 498 499 static const struct ethtool_ops ax_ethtool_ops = { 500 .get_drvinfo = ax_get_drvinfo, 501 .get_settings = ax_get_settings, 502 .set_settings = ax_set_settings, 503 .get_link = ethtool_op_get_link, 504 }; 505 506 #ifdef CONFIG_AX88796_93CX6 507 static void ax_eeprom_register_read(struct eeprom_93cx6 *eeprom) 508 { 509 struct ei_device *ei_local = eeprom->data; 510 u8 reg = ei_inb(ei_local->mem + AX_MEMR); 511 512 eeprom->reg_data_in = reg & AX_MEMR_EEI; 513 eeprom->reg_data_out = reg & AX_MEMR_EEO; /* Input pin */ 514 eeprom->reg_data_clock = reg & AX_MEMR_EECLK; 515 eeprom->reg_chip_select = reg & AX_MEMR_EECS; 516 } 517 518 static void ax_eeprom_register_write(struct eeprom_93cx6 *eeprom) 519 { 520 struct ei_device *ei_local = eeprom->data; 521 u8 reg = ei_inb(ei_local->mem + AX_MEMR); 522 523 reg &= ~(AX_MEMR_EEI | AX_MEMR_EECLK | AX_MEMR_EECS); 524 525 if (eeprom->reg_data_in) 526 reg |= AX_MEMR_EEI; 527 if (eeprom->reg_data_clock) 528 reg |= AX_MEMR_EECLK; 529 if (eeprom->reg_chip_select) 530 reg |= AX_MEMR_EECS; 531 532 ei_outb(reg, ei_local->mem + AX_MEMR); 533 udelay(10); 534 } 535 #endif 536 537 static const struct net_device_ops ax_netdev_ops = { 538 .ndo_open = ax_open, 539 .ndo_stop = ax_close, 540 .ndo_do_ioctl = ax_ioctl, 541 542 .ndo_start_xmit = ax_ei_start_xmit, 543 .ndo_tx_timeout = ax_ei_tx_timeout, 544 .ndo_get_stats = ax_ei_get_stats, 545 .ndo_set_rx_mode = ax_ei_set_multicast_list, 546 .ndo_validate_addr = eth_validate_addr, 547 .ndo_set_mac_address = eth_mac_addr, 548 .ndo_change_mtu = eth_change_mtu, 549 #ifdef CONFIG_NET_POLL_CONTROLLER 550 .ndo_poll_controller = ax_ei_poll, 551 #endif 552 }; 553 554 static void ax_bb_mdc(struct mdiobb_ctrl *ctrl, int level) 555 { 556 struct ax_device *ax = container_of(ctrl, struct ax_device, bb_ctrl); 557 558 if (level) 559 ax->reg_memr |= AX_MEMR_MDC; 560 else 561 ax->reg_memr &= ~AX_MEMR_MDC; 562 563 ei_outb(ax->reg_memr, ax->addr_memr); 564 } 565 566 static void ax_bb_dir(struct mdiobb_ctrl *ctrl, int output) 567 { 568 struct ax_device *ax = container_of(ctrl, struct ax_device, bb_ctrl); 569 570 if (output) 571 ax->reg_memr &= ~AX_MEMR_MDIR; 572 else 573 ax->reg_memr |= AX_MEMR_MDIR; 574 575 ei_outb(ax->reg_memr, ax->addr_memr); 576 } 577 578 static void ax_bb_set_data(struct mdiobb_ctrl *ctrl, int value) 579 { 580 struct ax_device *ax = container_of(ctrl, struct ax_device, bb_ctrl); 581 582 if (value) 583 ax->reg_memr |= AX_MEMR_MDO; 584 else 585 ax->reg_memr &= ~AX_MEMR_MDO; 586 587 ei_outb(ax->reg_memr, ax->addr_memr); 588 } 589 590 static int ax_bb_get_data(struct mdiobb_ctrl *ctrl) 591 { 592 struct ax_device *ax = container_of(ctrl, struct ax_device, bb_ctrl); 593 int reg_memr = ei_inb(ax->addr_memr); 594 595 return reg_memr & AX_MEMR_MDI ? 1 : 0; 596 } 597 598 static struct mdiobb_ops bb_ops = { 599 .owner = THIS_MODULE, 600 .set_mdc = ax_bb_mdc, 601 .set_mdio_dir = ax_bb_dir, 602 .set_mdio_data = ax_bb_set_data, 603 .get_mdio_data = ax_bb_get_data, 604 }; 605 606 /* setup code */ 607 608 static int ax_mii_init(struct net_device *dev) 609 { 610 struct platform_device *pdev = to_platform_device(dev->dev.parent); 611 struct ei_device *ei_local = netdev_priv(dev); 612 struct ax_device *ax = to_ax_dev(dev); 613 int err, i; 614 615 ax->bb_ctrl.ops = &bb_ops; 616 ax->addr_memr = ei_local->mem + AX_MEMR; 617 ax->mii_bus = alloc_mdio_bitbang(&ax->bb_ctrl); 618 if (!ax->mii_bus) { 619 err = -ENOMEM; 620 goto out; 621 } 622 623 ax->mii_bus->name = "ax88796_mii_bus"; 624 ax->mii_bus->parent = dev->dev.parent; 625 snprintf(ax->mii_bus->id, MII_BUS_ID_SIZE, "%s-%x", 626 pdev->name, pdev->id); 627 628 ax->mii_bus->irq = kmalloc(sizeof(int) * PHY_MAX_ADDR, GFP_KERNEL); 629 if (!ax->mii_bus->irq) { 630 err = -ENOMEM; 631 goto out_free_mdio_bitbang; 632 } 633 634 for (i = 0; i < PHY_MAX_ADDR; i++) 635 ax->mii_bus->irq[i] = PHY_POLL; 636 637 err = mdiobus_register(ax->mii_bus); 638 if (err) 639 goto out_free_irq; 640 641 return 0; 642 643 out_free_irq: 644 kfree(ax->mii_bus->irq); 645 out_free_mdio_bitbang: 646 free_mdio_bitbang(ax->mii_bus); 647 out: 648 return err; 649 } 650 651 static void ax_initial_setup(struct net_device *dev, struct ei_device *ei_local) 652 { 653 void __iomem *ioaddr = ei_local->mem; 654 struct ax_device *ax = to_ax_dev(dev); 655 656 /* Select page 0 */ 657 ei_outb(E8390_NODMA + E8390_PAGE0 + E8390_STOP, ioaddr + E8390_CMD); 658 659 /* set to byte access */ 660 ei_outb(ax->plat->dcr_val & ~1, ioaddr + EN0_DCFG); 661 ei_outb(ax->plat->gpoc_val, ioaddr + EI_SHIFT(0x17)); 662 } 663 664 /* 665 * ax_init_dev 666 * 667 * initialise the specified device, taking care to note the MAC 668 * address it may already have (if configured), ensure 669 * the device is ready to be used by lib8390.c and registerd with 670 * the network layer. 671 */ 672 static int ax_init_dev(struct net_device *dev) 673 { 674 struct ei_device *ei_local = netdev_priv(dev); 675 struct ax_device *ax = to_ax_dev(dev); 676 void __iomem *ioaddr = ei_local->mem; 677 unsigned int start_page; 678 unsigned int stop_page; 679 int ret; 680 int i; 681 682 ret = ax_initial_check(dev); 683 if (ret) 684 goto err_out; 685 686 /* setup goes here */ 687 688 ax_initial_setup(dev, ei_local); 689 690 /* read the mac from the card prom if we need it */ 691 692 if (ax->plat->flags & AXFLG_HAS_EEPROM) { 693 unsigned char SA_prom[32]; 694 695 for (i = 0; i < sizeof(SA_prom); i += 2) { 696 SA_prom[i] = ei_inb(ioaddr + NE_DATAPORT); 697 SA_prom[i + 1] = ei_inb(ioaddr + NE_DATAPORT); 698 } 699 700 if (ax->plat->wordlength == 2) 701 for (i = 0; i < 16; i++) 702 SA_prom[i] = SA_prom[i+i]; 703 704 memcpy(dev->dev_addr, SA_prom, 6); 705 } 706 707 #ifdef CONFIG_AX88796_93CX6 708 if (ax->plat->flags & AXFLG_HAS_93CX6) { 709 unsigned char mac_addr[6]; 710 struct eeprom_93cx6 eeprom; 711 712 eeprom.data = ei_local; 713 eeprom.register_read = ax_eeprom_register_read; 714 eeprom.register_write = ax_eeprom_register_write; 715 eeprom.width = PCI_EEPROM_WIDTH_93C56; 716 717 eeprom_93cx6_multiread(&eeprom, 0, 718 (__le16 __force *)mac_addr, 719 sizeof(mac_addr) >> 1); 720 721 memcpy(dev->dev_addr, mac_addr, 6); 722 } 723 #endif 724 if (ax->plat->wordlength == 2) { 725 /* We must set the 8390 for word mode. */ 726 ei_outb(ax->plat->dcr_val, ei_local->mem + EN0_DCFG); 727 start_page = NESM_START_PG; 728 stop_page = NESM_STOP_PG; 729 } else { 730 start_page = NE1SM_START_PG; 731 stop_page = NE1SM_STOP_PG; 732 } 733 734 /* load the mac-address from the device */ 735 if (ax->plat->flags & AXFLG_MAC_FROMDEV) { 736 ei_outb(E8390_NODMA + E8390_PAGE1 + E8390_STOP, 737 ei_local->mem + E8390_CMD); /* 0x61 */ 738 for (i = 0; i < ETH_ALEN; i++) 739 dev->dev_addr[i] = 740 ei_inb(ioaddr + EN1_PHYS_SHIFT(i)); 741 } 742 743 if ((ax->plat->flags & AXFLG_MAC_FROMPLATFORM) && 744 ax->plat->mac_addr) 745 memcpy(dev->dev_addr, ax->plat->mac_addr, ETH_ALEN); 746 747 ax_reset_8390(dev); 748 749 ei_local->name = "AX88796"; 750 ei_local->tx_start_page = start_page; 751 ei_local->stop_page = stop_page; 752 ei_local->word16 = (ax->plat->wordlength == 2); 753 ei_local->rx_start_page = start_page + TX_PAGES; 754 755 #ifdef PACKETBUF_MEMSIZE 756 /* Allow the packet buffer size to be overridden by know-it-alls. */ 757 ei_local->stop_page = ei_local->tx_start_page + PACKETBUF_MEMSIZE; 758 #endif 759 760 ei_local->reset_8390 = &ax_reset_8390; 761 ei_local->block_input = &ax_block_input; 762 ei_local->block_output = &ax_block_output; 763 ei_local->get_8390_hdr = &ax_get_8390_hdr; 764 ei_local->priv = 0; 765 766 dev->netdev_ops = &ax_netdev_ops; 767 dev->ethtool_ops = &ax_ethtool_ops; 768 769 ret = ax_mii_init(dev); 770 if (ret) 771 goto out_irq; 772 773 ax_NS8390_init(dev, 0); 774 775 ret = register_netdev(dev); 776 if (ret) 777 goto out_irq; 778 779 netdev_info(dev, "%dbit, irq %d, %lx, MAC: %pM\n", 780 ei_local->word16 ? 16 : 8, dev->irq, dev->base_addr, 781 dev->dev_addr); 782 783 return 0; 784 785 out_irq: 786 /* cleanup irq */ 787 free_irq(dev->irq, dev); 788 err_out: 789 return ret; 790 } 791 792 static int ax_remove(struct platform_device *pdev) 793 { 794 struct net_device *dev = platform_get_drvdata(pdev); 795 struct ei_device *ei_local = netdev_priv(dev); 796 struct ax_device *ax = to_ax_dev(dev); 797 struct resource *mem; 798 799 unregister_netdev(dev); 800 free_irq(dev->irq, dev); 801 802 iounmap(ei_local->mem); 803 mem = platform_get_resource(pdev, IORESOURCE_MEM, 0); 804 release_mem_region(mem->start, resource_size(mem)); 805 806 if (ax->map2) { 807 iounmap(ax->map2); 808 mem = platform_get_resource(pdev, IORESOURCE_MEM, 1); 809 release_mem_region(mem->start, resource_size(mem)); 810 } 811 812 free_netdev(dev); 813 814 return 0; 815 } 816 817 /* 818 * ax_probe 819 * 820 * This is the entry point when the platform device system uses to 821 * notify us of a new device to attach to. Allocate memory, find the 822 * resources and information passed, and map the necessary registers. 823 */ 824 static int ax_probe(struct platform_device *pdev) 825 { 826 struct net_device *dev; 827 struct ei_device *ei_local; 828 struct ax_device *ax; 829 struct resource *irq, *mem, *mem2; 830 resource_size_t mem_size, mem2_size = 0; 831 int ret = 0; 832 833 dev = ax__alloc_ei_netdev(sizeof(struct ax_device)); 834 if (dev == NULL) 835 return -ENOMEM; 836 837 /* ok, let's setup our device */ 838 SET_NETDEV_DEV(dev, &pdev->dev); 839 ei_local = netdev_priv(dev); 840 ax = to_ax_dev(dev); 841 842 ax->plat = pdev->dev.platform_data; 843 platform_set_drvdata(pdev, dev); 844 845 ei_local->rxcr_base = ax->plat->rcr_val; 846 847 /* find the platform resources */ 848 irq = platform_get_resource(pdev, IORESOURCE_IRQ, 0); 849 if (!irq) { 850 dev_err(&pdev->dev, "no IRQ specified\n"); 851 ret = -ENXIO; 852 goto exit_mem; 853 } 854 855 dev->irq = irq->start; 856 ax->irqflags = irq->flags & IRQF_TRIGGER_MASK; 857 858 mem = platform_get_resource(pdev, IORESOURCE_MEM, 0); 859 if (!mem) { 860 dev_err(&pdev->dev, "no MEM specified\n"); 861 ret = -ENXIO; 862 goto exit_mem; 863 } 864 865 mem_size = resource_size(mem); 866 867 /* 868 * setup the register offsets from either the platform data or 869 * by using the size of the resource provided 870 */ 871 if (ax->plat->reg_offsets) 872 ei_local->reg_offset = ax->plat->reg_offsets; 873 else { 874 ei_local->reg_offset = ax->reg_offsets; 875 for (ret = 0; ret < 0x18; ret++) 876 ax->reg_offsets[ret] = (mem_size / 0x18) * ret; 877 } 878 879 if (!request_mem_region(mem->start, mem_size, pdev->name)) { 880 dev_err(&pdev->dev, "cannot reserve registers\n"); 881 ret = -ENXIO; 882 goto exit_mem; 883 } 884 885 ei_local->mem = ioremap(mem->start, mem_size); 886 dev->base_addr = (unsigned long)ei_local->mem; 887 888 if (ei_local->mem == NULL) { 889 dev_err(&pdev->dev, "Cannot ioremap area %pR\n", mem); 890 891 ret = -ENXIO; 892 goto exit_req; 893 } 894 895 /* look for reset area */ 896 mem2 = platform_get_resource(pdev, IORESOURCE_MEM, 1); 897 if (!mem2) { 898 if (!ax->plat->reg_offsets) { 899 for (ret = 0; ret < 0x20; ret++) 900 ax->reg_offsets[ret] = (mem_size / 0x20) * ret; 901 } 902 } else { 903 mem2_size = resource_size(mem2); 904 905 if (!request_mem_region(mem2->start, mem2_size, pdev->name)) { 906 dev_err(&pdev->dev, "cannot reserve registers\n"); 907 ret = -ENXIO; 908 goto exit_mem1; 909 } 910 911 ax->map2 = ioremap(mem2->start, mem2_size); 912 if (!ax->map2) { 913 dev_err(&pdev->dev, "cannot map reset register\n"); 914 ret = -ENXIO; 915 goto exit_mem2; 916 } 917 918 ei_local->reg_offset[0x1f] = ax->map2 - ei_local->mem; 919 } 920 921 /* got resources, now initialise and register device */ 922 ret = ax_init_dev(dev); 923 if (!ret) 924 return 0; 925 926 if (!ax->map2) 927 goto exit_mem1; 928 929 iounmap(ax->map2); 930 931 exit_mem2: 932 release_mem_region(mem2->start, mem2_size); 933 934 exit_mem1: 935 iounmap(ei_local->mem); 936 937 exit_req: 938 release_mem_region(mem->start, mem_size); 939 940 exit_mem: 941 free_netdev(dev); 942 943 return ret; 944 } 945 946 /* suspend and resume */ 947 948 #ifdef CONFIG_PM 949 static int ax_suspend(struct platform_device *dev, pm_message_t state) 950 { 951 struct net_device *ndev = platform_get_drvdata(dev); 952 struct ax_device *ax = to_ax_dev(ndev); 953 954 ax->resume_open = ax->running; 955 956 netif_device_detach(ndev); 957 ax_close(ndev); 958 959 return 0; 960 } 961 962 static int ax_resume(struct platform_device *pdev) 963 { 964 struct net_device *ndev = platform_get_drvdata(pdev); 965 struct ax_device *ax = to_ax_dev(ndev); 966 967 ax_initial_setup(ndev, netdev_priv(ndev)); 968 ax_NS8390_init(ndev, ax->resume_open); 969 netif_device_attach(ndev); 970 971 if (ax->resume_open) 972 ax_open(ndev); 973 974 return 0; 975 } 976 977 #else 978 #define ax_suspend NULL 979 #define ax_resume NULL 980 #endif 981 982 static struct platform_driver axdrv = { 983 .driver = { 984 .name = "ax88796", 985 .owner = THIS_MODULE, 986 }, 987 .probe = ax_probe, 988 .remove = ax_remove, 989 .suspend = ax_suspend, 990 .resume = ax_resume, 991 }; 992 993 module_platform_driver(axdrv); 994 995 MODULE_DESCRIPTION("AX88796 10/100 Ethernet platform driver"); 996 MODULE_AUTHOR("Ben Dooks, <ben@simtec.co.uk>"); 997 MODULE_LICENSE("GPL v2"); 998 MODULE_ALIAS("platform:ax88796"); 999