1# 2# 8390 device configuration 3# 4 5config NET_VENDOR_8390 6 bool "National Semiconductor 8390 devices" 7 default y 8 depends on NET_VENDOR_NATSEMI 9 ---help--- 10 If you have a network (Ethernet) card belonging to this class, say Y. 11 12 Note that the answer to this question doesn't directly affect the 13 kernel: saying N will just cause the configurator to skip all 14 the questions about Western Digital cards. If you say Y, you will be 15 asked for your specific card in the following questions. 16 17if NET_VENDOR_8390 18 19config PCMCIA_AXNET 20 tristate "Asix AX88190 PCMCIA support" 21 depends on PCMCIA 22 ---help--- 23 Say Y here if you intend to attach an Asix AX88190-based PCMCIA 24 (PC-card) Fast Ethernet card to your computer. These cards are 25 nearly NE2000 compatible but need a separate driver due to a few 26 misfeatures. 27 28 To compile this driver as a module, choose M here: the module will be 29 called axnet_cs. If unsure, say N. 30 31config AX88796 32 tristate "ASIX AX88796 NE2000 clone support" 33 depends on (ARM || MIPS || SUPERH) 34 select CRC32 35 select PHYLIB 36 select MDIO_BITBANG 37 ---help--- 38 AX88796 driver, using platform bus to provide 39 chip detection and resources 40 41config AX88796_93CX6 42 bool "ASIX AX88796 external 93CX6 eeprom support" 43 depends on AX88796 44 select EEPROM_93CX6 45 ---help--- 46 Select this if your platform comes with an external 93CX6 eeprom. 47 48config HYDRA 49 tristate "Hydra support" 50 depends on ZORRO 51 select CRC32 52 ---help--- 53 If you have a Hydra Ethernet adapter, say Y. Otherwise, say N. 54 55 To compile this driver as a module, choose M here: the module 56 will be called hydra. 57 58config ARM_ETHERH 59 tristate "I-cubed EtherH/ANT EtherM support" 60 depends on ARM && ARCH_ACORN 61 select CRC32 62 ---help--- 63 If you have an Acorn system with one of these network cards, you 64 should say Y to this option if you wish to use it with Linux. 65 66config MAC8390 67 tristate "Macintosh NS 8390 based ethernet cards" 68 depends on MAC 69 select CRC32 70 ---help--- 71 If you want to include a driver to support Nubus or LC-PDS 72 Ethernet cards using an NS8390 chipset or its equivalent, say Y. 73 74config MCF8390 75 tristate "ColdFire NS8390 based Ethernet support" 76 depends on COLDFIRE 77 select CRC32 78 ---help--- 79 This driver is for Ethernet devices using an NS8390-compatible 80 chipset on many common ColdFire CPU based boards. Many of the older 81 Freescale dev boards use this, and some other common boards like 82 some SnapGear routers do as well. 83 84 If you have one of these boards and want to use the network interface 85 on them then choose Y. To compile this driver as a module, choose M 86 here, the module will be called mcf8390. 87 88config NE2000 89 tristate "NE2000/NE1000 support" 90 depends on (ISA || (Q40 && m) || M32R || MACH_TX49XX || \ 91 ATARI_ETHERNEC) 92 select CRC32 93 ---help--- 94 If you have a network (Ethernet) card of this type, say Y here. 95 Many Ethernet cards without a specific driver are compatible with 96 the NE2000. 97 98 If you have a PCI NE2000 card however, say N here and Y to "PCI 99 NE2000 and clone support" below. 100 101 To compile this driver as a module, choose M here. The module 102 will be called ne. 103 104config NE2K_PCI 105 tristate "PCI NE2000 and clones support (see help)" 106 depends on PCI 107 select CRC32 108 ---help--- 109 This driver is for NE2000 compatible PCI cards. It will not work 110 with ISA NE2000 cards (they have their own driver, "NE2000/NE1000 111 support" below). If you have a PCI NE2000 network (Ethernet) card, 112 say Y here. 113 114 This driver also works for the following NE2000 clone cards: 115 RealTek RTL-8029 Winbond 89C940 Compex RL2000 KTI ET32P2 116 NetVin NV5000SC Via 86C926 SureCom NE34 Winbond 117 Holtek HT80232 Holtek HT80229 118 119 To compile this driver as a module, choose M here. The module 120 will be called ne2k-pci. 121 122config APNE 123 tristate "PCMCIA NE2000 support" 124 depends on AMIGA_PCMCIA 125 select CRC32 126 ---help--- 127 If you have a PCMCIA NE2000 compatible adapter, say Y. Otherwise, 128 say N. 129 130 To compile this driver as a module, choose M here: the module 131 will be called apne. 132 133config PCMCIA_PCNET 134 tristate "NE2000 compatible PCMCIA support" 135 depends on PCMCIA 136 select CRC32 137 ---help--- 138 Say Y here if you intend to attach an NE2000 compatible PCMCIA 139 (PC-card) Ethernet or Fast Ethernet card to your computer. 140 141 To compile this driver as a module, choose M here: the module will be 142 called pcnet_cs. If unsure, say N. 143 144config STNIC 145 tristate "National DP83902AV support" 146 depends on SUPERH 147 select CRC32 148 ---help--- 149 Support for cards based on the National Semiconductor DP83902AV 150 ST-NIC Serial Network Interface Controller for Twisted Pair. This 151 is a 10Mbit/sec Ethernet controller. Product overview and specs at 152 <http://www.national.com/pf/DP/DP83902A.html>. 153 154 If unsure, say N. 155 156config ULTRA 157 tristate "SMC Ultra support" 158 depends on ISA 159 select CRC32 160 ---help--- 161 If you have a network (Ethernet) card of this type, say Y here. 162 163 Important: There have been many reports that, with some motherboards 164 mixing an SMC Ultra and an Adaptec AHA154x SCSI card (or compatible, 165 such as some BusLogic models) causes corruption problems with many 166 operating systems. The Linux smc-ultra driver has a work-around for 167 this but keep it in mind if you have such a SCSI card and have 168 problems. 169 170 To compile this driver as a module, choose M here. The module 171 will be called smc-ultra. 172 173config WD80x3 174 tristate "WD80*3 support" 175 depends on ISA 176 select CRC32 177 ---help--- 178 If you have a network (Ethernet) card of this type, say Y here. 179 180 To compile this driver as a module, choose M here. The module 181 will be called wd. 182 183config ZORRO8390 184 tristate "Zorro NS8390-based Ethernet support" 185 depends on ZORRO 186 select CRC32 187 ---help--- 188 This driver is for Zorro Ethernet cards using an NS8390-compatible 189 chipset, like the Village Tronic Ariadne II and the Individual 190 Computers X-Surf Ethernet cards. If you have such a card, say Y. 191 Otherwise, say N. 192 193 To compile this driver as a module, choose M here: the module 194 will be called zorro8390. 195 196endif # NET_VENDOR_8390 197