1# 2# 8390 device configuration 3# 4 5config NET_VENDOR_8390 6 bool "National Semi-conductor 8390 devices" 7 default y 8 depends on NET_VENDOR_NATSEMI 9 ---help--- 10 If you have a network (Ethernet) card belonging to this class, say Y 11 and read the Ethernet-HOWTO, available from 12 <http://www.tldp.org/docs.html#howto>. 13 14 Note that the answer to this question doesn't directly affect the 15 kernel: saying N will just cause the configurator to skip all 16 the questions about Western Digital cards. If you say Y, you will be 17 asked for your specific card in the following questions. 18 19if NET_VENDOR_8390 20 21config PCMCIA_AXNET 22 tristate "Asix AX88190 PCMCIA support" 23 depends on PCMCIA 24 ---help--- 25 Say Y here if you intend to attach an Asix AX88190-based PCMCIA 26 (PC-card) Fast Ethernet card to your computer. These cards are 27 nearly NE2000 compatible but need a separate driver due to a few 28 misfeatures. 29 30 To compile this driver as a module, choose M here: the module will be 31 called axnet_cs. If unsure, say N. 32 33config AX88796 34 tristate "ASIX AX88796 NE2000 clone support" 35 depends on (ARM || MIPS || SUPERH) 36 select CRC32 37 select PHYLIB 38 select MDIO_BITBANG 39 ---help--- 40 AX88796 driver, using platform bus to provide 41 chip detection and resources 42 43config AX88796_93CX6 44 bool "ASIX AX88796 external 93CX6 eeprom support" 45 depends on AX88796 46 select EEPROM_93CX6 47 ---help--- 48 Select this if your platform comes with an external 93CX6 eeprom. 49 50config HYDRA 51 tristate "Hydra support" 52 depends on ZORRO 53 select CRC32 54 ---help--- 55 If you have a Hydra Ethernet adapter, say Y. Otherwise, say N. 56 57 To compile this driver as a module, choose M here: the module 58 will be called hydra. 59 60config ARM_ETHERH 61 tristate "I-cubed EtherH/ANT EtherM support" 62 depends on ARM && ARCH_ACORN 63 select CRC32 64 ---help--- 65 If you have an Acorn system with one of these network cards, you 66 should say Y to this option if you wish to use it with Linux. 67 68config MAC8390 69 bool "Macintosh NS 8390 based ethernet cards" 70 depends on MAC 71 select CRC32 72 ---help--- 73 If you want to include a driver to support Nubus or LC-PDS 74 Ethernet cards using an NS8390 chipset or its equivalent, say Y 75 and read the Ethernet-HOWTO, available from 76 <http://www.tldp.org/docs.html#howto>. 77 78config MCF8390 79 tristate "ColdFire NS8390 based Ethernet support" 80 depends on COLDFIRE 81 select CRC32 82 ---help--- 83 This driver is for Ethernet devices using an NS8390-compatible 84 chipset on many common ColdFire CPU based boards. Many of the older 85 Freescale dev boards use this, and some other common boards like 86 some SnapGear routers do as well. 87 88 If you have one of these boards and want to use the network interface 89 on them then choose Y. To compile this driver as a module, choose M 90 here, the module will be called mcf8390. 91 92config NE2000 93 tristate "NE2000/NE1000 support" 94 depends on (ISA || (Q40 && m) || M32R || MACH_TX49XX || \ 95 ATARI_ETHERNEC) 96 select CRC32 97 ---help--- 98 If you have a network (Ethernet) card of this type, say Y and read 99 the Ethernet-HOWTO, available from 100 <http://www.tldp.org/docs.html#howto>. Many Ethernet cards 101 without a specific driver are compatible with NE2000. 102 103 If you have a PCI NE2000 card however, say N here and Y to "PCI 104 NE2000 and clone support" below. 105 106 To compile this driver as a module, choose M here. The module 107 will be called ne. 108 109config NE2K_PCI 110 tristate "PCI NE2000 and clones support (see help)" 111 depends on PCI 112 select CRC32 113 ---help--- 114 This driver is for NE2000 compatible PCI cards. It will not work 115 with ISA NE2000 cards (they have their own driver, "NE2000/NE1000 116 support" below). If you have a PCI NE2000 network (Ethernet) card, 117 say Y and read the Ethernet-HOWTO, available from 118 <http://www.tldp.org/docs.html#howto>. 119 120 This driver also works for the following NE2000 clone cards: 121 RealTek RTL-8029 Winbond 89C940 Compex RL2000 KTI ET32P2 122 NetVin NV5000SC Via 86C926 SureCom NE34 Winbond 123 Holtek HT80232 Holtek HT80229 124 125 To compile this driver as a module, choose M here. The module 126 will be called ne2k-pci. 127 128config APNE 129 tristate "PCMCIA NE2000 support" 130 depends on AMIGA_PCMCIA 131 select CRC32 132 ---help--- 133 If you have a PCMCIA NE2000 compatible adapter, say Y. Otherwise, 134 say N. 135 136 To compile this driver as a module, choose M here: the module 137 will be called apne. 138 139config PCMCIA_PCNET 140 tristate "NE2000 compatible PCMCIA support" 141 depends on PCMCIA 142 select CRC32 143 ---help--- 144 Say Y here if you intend to attach an NE2000 compatible PCMCIA 145 (PC-card) Ethernet or Fast Ethernet card to your computer. 146 147 To compile this driver as a module, choose M here: the module will be 148 called pcnet_cs. If unsure, say N. 149 150config STNIC 151 tristate "National DP83902AV support" 152 depends on SUPERH 153 select CRC32 154 ---help--- 155 Support for cards based on the National Semiconductor DP83902AV 156 ST-NIC Serial Network Interface Controller for Twisted Pair. This 157 is a 10Mbit/sec Ethernet controller. Product overview and specs at 158 <http://www.national.com/pf/DP/DP83902A.html>. 159 160 If unsure, say N. 161 162config ULTRA 163 tristate "SMC Ultra support" 164 depends on ISA 165 select CRC32 166 ---help--- 167 If you have a network (Ethernet) card of this type, say Y and read 168 the Ethernet-HOWTO, available from 169 <http://www.tldp.org/docs.html#howto>. 170 171 Important: There have been many reports that, with some motherboards 172 mixing an SMC Ultra and an Adaptec AHA154x SCSI card (or compatible, 173 such as some BusLogic models) causes corruption problems with many 174 operating systems. The Linux smc-ultra driver has a work-around for 175 this but keep it in mind if you have such a SCSI card and have 176 problems. 177 178 To compile this driver as a module, choose M here. The module 179 will be called smc-ultra. 180 181config WD80x3 182 tristate "WD80*3 support" 183 depends on ISA 184 select CRC32 185 ---help--- 186 If you have a network (Ethernet) card of this type, say Y and read 187 the Ethernet-HOWTO, available from 188 <http://www.tldp.org/docs.html#howto>. 189 190 To compile this driver as a module, choose M here. The module 191 will be called wd. 192 193config ZORRO8390 194 tristate "Zorro NS8390-based Ethernet support" 195 depends on ZORRO 196 select CRC32 197 ---help--- 198 This driver is for Zorro Ethernet cards using an NS8390-compatible 199 chipset, like the Village Tronic Ariadne II and the Individual 200 Computers X-Surf Ethernet cards. If you have such a card, say Y. 201 Otherwise, say N. 202 203 To compile this driver as a module, choose M here: the module 204 will be called zorro8390. 205 206endif # NET_VENDOR_8390 207