1# 2# 8390 device configuration 3# 4 5config NET_VENDOR_8390 6 bool "National Semi-conductor 8390 devices" 7 default y 8 depends on NET_VENDOR_NATSEMI 9 ---help--- 10 If you have a network (Ethernet) card belonging to this class, say Y 11 and read the Ethernet-HOWTO, available from 12 <http://www.tldp.org/docs.html#howto>. 13 14 Note that the answer to this question doesn't directly affect the 15 kernel: saying N will just cause the configurator to skip all 16 the questions about Western Digital cards. If you say Y, you will be 17 asked for your specific card in the following questions. 18 19if NET_VENDOR_8390 20 21config PCMCIA_AXNET 22 tristate "Asix AX88190 PCMCIA support" 23 depends on PCMCIA 24 ---help--- 25 Say Y here if you intend to attach an Asix AX88190-based PCMCIA 26 (PC-card) Fast Ethernet card to your computer. These cards are 27 nearly NE2000 compatible but need a separate driver due to a few 28 misfeatures. 29 30 To compile this driver as a module, choose M here: the module will be 31 called axnet_cs. If unsure, say N. 32 33config AX88796 34 tristate "ASIX AX88796 NE2000 clone support" 35 depends on (ARM || MIPS || SUPERH) 36 select CRC32 37 select PHYLIB 38 select MDIO_BITBANG 39 ---help--- 40 AX88796 driver, using platform bus to provide 41 chip detection and resources 42 43config AX88796_93CX6 44 bool "ASIX AX88796 external 93CX6 eeprom support" 45 depends on AX88796 46 select EEPROM_93CX6 47 ---help--- 48 Select this if your platform comes with an external 93CX6 eeprom. 49 50config HYDRA 51 tristate "Hydra support" 52 depends on ZORRO 53 select CRC32 54 ---help--- 55 If you have a Hydra Ethernet adapter, say Y. Otherwise, say N. 56 57 To compile this driver as a module, choose M here: the module 58 will be called hydra. 59 60config ARM_ETHERH 61 tristate "I-cubed EtherH/ANT EtherM support" 62 depends on ARM && ARCH_ACORN 63 select CRC32 64 ---help--- 65 If you have an Acorn system with one of these network cards, you 66 should say Y to this option if you wish to use it with Linux. 67 68config MAC8390 69 bool "Macintosh NS 8390 based ethernet cards" 70 depends on MAC 71 select CRC32 72 ---help--- 73 If you want to include a driver to support Nubus or LC-PDS 74 Ethernet cards using an NS8390 chipset or its equivalent, say Y 75 and read the Ethernet-HOWTO, available from 76 <http://www.tldp.org/docs.html#howto>. 77 78config MCF8390 79 tristate "ColdFire NS8390 based Ethernet support" 80 depends on COLDFIRE 81 select CRC32 82 ---help--- 83 This driver is for Ethernet devices using an NS8390-compatible 84 chipset on many common ColdFire CPU based boards. Many of the older 85 Freescale dev boards use this, and some other common boards like 86 some SnapGear routers do as well. 87 88 If you have one of these boards and want to use the network interface 89 on them then choose Y. To compile this driver as a module, choose M 90 here, the module will be called mcf8390. 91 92config NE2000 93 tristate "NE2000/NE1000 support" 94 depends on (ISA || (Q40 && m) || M32R || MACH_TX49XX) 95 select CRC32 96 ---help--- 97 If you have a network (Ethernet) card of this type, say Y and read 98 the Ethernet-HOWTO, available from 99 <http://www.tldp.org/docs.html#howto>. Many Ethernet cards 100 without a specific driver are compatible with NE2000. 101 102 If you have a PCI NE2000 card however, say N here and Y to "PCI 103 NE2000 and clone support" below. 104 105 To compile this driver as a module, choose M here. The module 106 will be called ne. 107 108config NE2K_PCI 109 tristate "PCI NE2000 and clones support (see help)" 110 depends on PCI 111 select CRC32 112 ---help--- 113 This driver is for NE2000 compatible PCI cards. It will not work 114 with ISA NE2000 cards (they have their own driver, "NE2000/NE1000 115 support" below). If you have a PCI NE2000 network (Ethernet) card, 116 say Y and read the Ethernet-HOWTO, available from 117 <http://www.tldp.org/docs.html#howto>. 118 119 This driver also works for the following NE2000 clone cards: 120 RealTek RTL-8029 Winbond 89C940 Compex RL2000 KTI ET32P2 121 NetVin NV5000SC Via 86C926 SureCom NE34 Winbond 122 Holtek HT80232 Holtek HT80229 123 124 To compile this driver as a module, choose M here. The module 125 will be called ne2k-pci. 126 127config APNE 128 tristate "PCMCIA NE2000 support" 129 depends on AMIGA_PCMCIA 130 select CRC32 131 ---help--- 132 If you have a PCMCIA NE2000 compatible adapter, say Y. Otherwise, 133 say N. 134 135 To compile this driver as a module, choose M here: the module 136 will be called apne. 137 138config PCMCIA_PCNET 139 tristate "NE2000 compatible PCMCIA support" 140 depends on PCMCIA 141 select CRC32 142 ---help--- 143 Say Y here if you intend to attach an NE2000 compatible PCMCIA 144 (PC-card) Ethernet or Fast Ethernet card to your computer. 145 146 To compile this driver as a module, choose M here: the module will be 147 called pcnet_cs. If unsure, say N. 148 149config NE_H8300 150 tristate "NE2000 compatible support for H8/300" 151 depends on H8300 152 ---help--- 153 Say Y here if you want to use the NE2000 compatible 154 controller on the Renesas H8/300 processor. 155 156config STNIC 157 tristate "National DP83902AV support" 158 depends on SUPERH 159 select CRC32 160 ---help--- 161 Support for cards based on the National Semiconductor DP83902AV 162 ST-NIC Serial Network Interface Controller for Twisted Pair. This 163 is a 10Mbit/sec Ethernet controller. Product overview and specs at 164 <http://www.national.com/pf/DP/DP83902A.html>. 165 166 If unsure, say N. 167 168config ULTRA 169 tristate "SMC Ultra support" 170 depends on ISA 171 select CRC32 172 ---help--- 173 If you have a network (Ethernet) card of this type, say Y and read 174 the Ethernet-HOWTO, available from 175 <http://www.tldp.org/docs.html#howto>. 176 177 Important: There have been many reports that, with some motherboards 178 mixing an SMC Ultra and an Adaptec AHA154x SCSI card (or compatible, 179 such as some BusLogic models) causes corruption problems with many 180 operating systems. The Linux smc-ultra driver has a work-around for 181 this but keep it in mind if you have such a SCSI card and have 182 problems. 183 184 To compile this driver as a module, choose M here. The module 185 will be called smc-ultra. 186 187config WD80x3 188 tristate "WD80*3 support" 189 depends on ISA 190 select CRC32 191 ---help--- 192 If you have a network (Ethernet) card of this type, say Y and read 193 the Ethernet-HOWTO, available from 194 <http://www.tldp.org/docs.html#howto>. 195 196 To compile this driver as a module, choose M here. The module 197 will be called wd. 198 199config ZORRO8390 200 tristate "Zorro NS8390-based Ethernet support" 201 depends on ZORRO 202 select CRC32 203 ---help--- 204 This driver is for Zorro Ethernet cards using an NS8390-compatible 205 chipset, like the Village Tronic Ariadne II and the Individual 206 Computers X-Surf Ethernet cards. If you have such a card, say Y. 207 Otherwise, say N. 208 209 To compile this driver as a module, choose M here: the module 210 will be called zorro8390. 211 212endif # NET_VENDOR_8390 213