1 /* ======================================================================
2  *
3  * A PCMCIA ethernet driver for the 3com 3c589 card.
4  *
5  * Copyright (C) 1999 David A. Hinds -- dahinds@users.sourceforge.net
6  *
7  * 3c589_cs.c 1.162 2001/10/13 00:08:50
8  *
9  * The network driver code is based on Donald Becker's 3c589 code:
10  *
11  * Written 1994 by Donald Becker.
12  * Copyright 1993 United States Government as represented by the
13  * Director, National Security Agency.  This software may be used and
14  * distributed according to the terms of the GNU General Public License,
15  * incorporated herein by reference.
16  * Donald Becker may be reached at becker@scyld.com
17  *
18  * Updated for 2.5.x by Alan Cox <alan@lxorguk.ukuu.org.uk>
19  *
20  * ======================================================================
21  */
22 
23 #define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
24 
25 #define DRV_NAME	"3c589_cs"
26 
27 #include <linux/module.h>
28 #include <linux/kernel.h>
29 #include <linux/ptrace.h>
30 #include <linux/slab.h>
31 #include <linux/string.h>
32 #include <linux/timer.h>
33 #include <linux/interrupt.h>
34 #include <linux/in.h>
35 #include <linux/delay.h>
36 #include <linux/ethtool.h>
37 #include <linux/netdevice.h>
38 #include <linux/etherdevice.h>
39 #include <linux/skbuff.h>
40 #include <linux/if_arp.h>
41 #include <linux/ioport.h>
42 #include <linux/bitops.h>
43 #include <linux/jiffies.h>
44 #include <linux/uaccess.h>
45 #include <linux/io.h>
46 
47 #include <pcmcia/cistpl.h>
48 #include <pcmcia/cisreg.h>
49 #include <pcmcia/ciscode.h>
50 #include <pcmcia/ds.h>
51 
52 
53 /* To minimize the size of the driver source I only define operating
54  * constants if they are used several times. You'll need the manual
55  * if you want to understand driver details.
56  */
57 
58 /* Offsets from base I/O address. */
59 #define EL3_DATA	0x00
60 #define EL3_TIMER	0x0a
61 #define EL3_CMD		0x0e
62 #define EL3_STATUS	0x0e
63 
64 #define EEPROM_READ	0x0080
65 #define EEPROM_BUSY	0x8000
66 
67 #define EL3WINDOW(win_num) outw(SelectWindow + (win_num), ioaddr + EL3_CMD)
68 
69 /* The top five bits written to EL3_CMD are a command, the lower
70  * 11 bits are the parameter, if applicable.
71  */
72 
73 enum c509cmd {
74 	TotalReset	= 0<<11,
75 	SelectWindow	= 1<<11,
76 	StartCoax	= 2<<11,
77 	RxDisable	= 3<<11,
78 	RxEnable	= 4<<11,
79 	RxReset		= 5<<11,
80 	RxDiscard	= 8<<11,
81 	TxEnable	= 9<<11,
82 	TxDisable	= 10<<11,
83 	TxReset		= 11<<11,
84 	FakeIntr	= 12<<11,
85 	AckIntr		= 13<<11,
86 	SetIntrEnb	= 14<<11,
87 	SetStatusEnb	= 15<<11,
88 	SetRxFilter	= 16<<11,
89 	SetRxThreshold	= 17<<11,
90 	SetTxThreshold	= 18<<11,
91 	SetTxStart	= 19<<11,
92 	StatsEnable	= 21<<11,
93 	StatsDisable	= 22<<11,
94 	StopCoax	= 23<<11
95 };
96 
97 enum c509status {
98 	IntLatch	= 0x0001,
99 	AdapterFailure	= 0x0002,
100 	TxComplete	= 0x0004,
101 	TxAvailable	= 0x0008,
102 	RxComplete	= 0x0010,
103 	RxEarly		= 0x0020,
104 	IntReq		= 0x0040,
105 	StatsFull	= 0x0080,
106 	CmdBusy		= 0x1000
107 };
108 
109 /* The SetRxFilter command accepts the following classes: */
110 enum RxFilter {
111 	RxStation	= 1,
112 	RxMulticast	= 2,
113 	RxBroadcast	= 4,
114 	RxProm		= 8
115 };
116 
117 /* Register window 1 offsets, the window used in normal operation. */
118 #define TX_FIFO		0x00
119 #define RX_FIFO		0x00
120 #define RX_STATUS	0x08
121 #define TX_STATUS	0x0B
122 #define TX_FREE		0x0C	/* Remaining free bytes in Tx buffer. */
123 
124 #define WN0_IRQ		0x08	/* Window 0: Set IRQ line in bits 12-15. */
125 #define WN4_MEDIA	0x0A	/* Window 4: Various transcvr/media bits. */
126 #define MEDIA_TP	0x00C0	/* Enable link beat and jabber for 10baseT. */
127 #define MEDIA_LED	0x0001	/* Enable link light on 3C589E cards. */
128 
129 /* Time in jiffies before concluding Tx hung */
130 #define TX_TIMEOUT	((400*HZ)/1000)
131 
132 struct el3_private {
133 	struct pcmcia_device	*p_dev;
134 	/* For transceiver monitoring */
135 	struct timer_list	media;
136 	u16			media_status;
137 	u16			fast_poll;
138 	unsigned long		last_irq;
139 	spinlock_t		lock;
140 };
141 
142 static const char *if_names[] = { "auto", "10baseT", "10base2", "AUI" };
143 
144 /*====================================================================*/
145 
146 /* Module parameters */
147 
148 MODULE_AUTHOR("David Hinds <dahinds@users.sourceforge.net>");
149 MODULE_DESCRIPTION("3Com 3c589 series PCMCIA ethernet driver");
150 MODULE_LICENSE("GPL");
151 
152 #define INT_MODULE_PARM(n, v) static int n = v; module_param(n, int, 0)
153 
154 /* Special hook for setting if_port when module is loaded */
155 INT_MODULE_PARM(if_port, 0);
156 
157 
158 /*====================================================================*/
159 
160 static int tc589_config(struct pcmcia_device *link);
161 static void tc589_release(struct pcmcia_device *link);
162 
163 static u16 read_eeprom(unsigned int ioaddr, int index);
164 static void tc589_reset(struct net_device *dev);
165 static void media_check(struct timer_list *t);
166 static int el3_config(struct net_device *dev, struct ifmap *map);
167 static int el3_open(struct net_device *dev);
168 static netdev_tx_t el3_start_xmit(struct sk_buff *skb,
169 					struct net_device *dev);
170 static irqreturn_t el3_interrupt(int irq, void *dev_id);
171 static void update_stats(struct net_device *dev);
172 static struct net_device_stats *el3_get_stats(struct net_device *dev);
173 static int el3_rx(struct net_device *dev);
174 static int el3_close(struct net_device *dev);
175 static void el3_tx_timeout(struct net_device *dev, unsigned int txqueue);
176 static void set_rx_mode(struct net_device *dev);
177 static void set_multicast_list(struct net_device *dev);
178 static const struct ethtool_ops netdev_ethtool_ops;
179 
180 static void tc589_detach(struct pcmcia_device *p_dev);
181 
182 static const struct net_device_ops el3_netdev_ops = {
183 	.ndo_open		= el3_open,
184 	.ndo_stop		= el3_close,
185 	.ndo_start_xmit		= el3_start_xmit,
186 	.ndo_tx_timeout		= el3_tx_timeout,
187 	.ndo_set_config		= el3_config,
188 	.ndo_get_stats		= el3_get_stats,
189 	.ndo_set_rx_mode	= set_multicast_list,
190 	.ndo_set_mac_address	= eth_mac_addr,
191 	.ndo_validate_addr	= eth_validate_addr,
192 };
193 
194 static int tc589_probe(struct pcmcia_device *link)
195 {
196 	struct el3_private *lp;
197 	struct net_device *dev;
198 
199 	dev_dbg(&link->dev, "3c589_attach()\n");
200 
201 	/* Create new ethernet device */
202 	dev = alloc_etherdev(sizeof(struct el3_private));
203 	if (!dev)
204 		return -ENOMEM;
205 	lp = netdev_priv(dev);
206 	link->priv = dev;
207 	lp->p_dev = link;
208 
209 	spin_lock_init(&lp->lock);
210 	link->resource[0]->end = 16;
211 	link->resource[0]->flags |= IO_DATA_PATH_WIDTH_16;
212 
213 	link->config_flags |= CONF_ENABLE_IRQ;
214 	link->config_index = 1;
215 
216 	dev->netdev_ops = &el3_netdev_ops;
217 	dev->watchdog_timeo = TX_TIMEOUT;
218 
219 	dev->ethtool_ops = &netdev_ethtool_ops;
220 
221 	return tc589_config(link);
222 }
223 
224 static void tc589_detach(struct pcmcia_device *link)
225 {
226 	struct net_device *dev = link->priv;
227 
228 	dev_dbg(&link->dev, "3c589_detach\n");
229 
230 	unregister_netdev(dev);
231 
232 	tc589_release(link);
233 
234 	free_netdev(dev);
235 } /* tc589_detach */
236 
237 static int tc589_config(struct pcmcia_device *link)
238 {
239 	struct net_device *dev = link->priv;
240 	int ret, i, j, multi = 0, fifo;
241 	__be16 addr[ETH_ALEN / 2];
242 	unsigned int ioaddr;
243 	static const char * const ram_split[] = {"5:3", "3:1", "1:1", "3:5"};
244 	u8 *buf;
245 	size_t len;
246 
247 	dev_dbg(&link->dev, "3c589_config\n");
248 
249 	/* Is this a 3c562? */
250 	if (link->manf_id != MANFID_3COM)
251 		dev_info(&link->dev, "hmmm, is this really a 3Com card??\n");
252 	multi = (link->card_id == PRODID_3COM_3C562);
253 
254 	link->io_lines = 16;
255 
256 	/* For the 3c562, the base address must be xx00-xx7f */
257 	for (i = j = 0; j < 0x400; j += 0x10) {
258 		if (multi && (j & 0x80))
259 			continue;
260 		link->resource[0]->start = j ^ 0x300;
261 		i = pcmcia_request_io(link);
262 		if (i == 0)
263 			break;
264 	}
265 	if (i != 0)
266 		goto failed;
267 
268 	ret = pcmcia_request_irq(link, el3_interrupt);
269 	if (ret)
270 		goto failed;
271 
272 	ret = pcmcia_enable_device(link);
273 	if (ret)
274 		goto failed;
275 
276 	dev->irq = link->irq;
277 	dev->base_addr = link->resource[0]->start;
278 	ioaddr = dev->base_addr;
279 	EL3WINDOW(0);
280 
281 	/* The 3c589 has an extra EEPROM for configuration info, including
282 	 * the hardware address.  The 3c562 puts the address in the CIS.
283 	 */
284 	len = pcmcia_get_tuple(link, 0x88, &buf);
285 	if (buf && len >= 6) {
286 		for (i = 0; i < 3; i++)
287 			addr[i] = htons(le16_to_cpu(buf[i*2]));
288 		kfree(buf);
289 	} else {
290 		kfree(buf); /* 0 < len < 6 */
291 		for (i = 0; i < 3; i++)
292 			addr[i] = htons(read_eeprom(ioaddr, i));
293 		if (addr[0] == htons(0x6060)) {
294 			dev_err(&link->dev, "IO port conflict at 0x%03lx-0x%03lx\n",
295 					dev->base_addr, dev->base_addr+15);
296 			goto failed;
297 		}
298 	}
299 	eth_hw_addr_set(dev, (u8 *)addr);
300 
301 	/* The address and resource configuration register aren't loaded from
302 	 * the EEPROM and *must* be set to 0 and IRQ3 for the PCMCIA version.
303 	 */
304 
305 	outw(0x3f00, ioaddr + 8);
306 	fifo = inl(ioaddr);
307 
308 	/* The if_port symbol can be set when the module is loaded */
309 	if ((if_port >= 0) && (if_port <= 3))
310 		dev->if_port = if_port;
311 	else
312 		dev_err(&link->dev, "invalid if_port requested\n");
313 
314 	SET_NETDEV_DEV(dev, &link->dev);
315 
316 	if (register_netdev(dev) != 0) {
317 		dev_err(&link->dev, "register_netdev() failed\n");
318 		goto failed;
319 	}
320 
321 	netdev_info(dev, "3Com 3c%s, io %#3lx, irq %d, hw_addr %pM\n",
322 			(multi ? "562" : "589"), dev->base_addr, dev->irq,
323 			dev->dev_addr);
324 	netdev_info(dev, "  %dK FIFO split %s Rx:Tx, %s xcvr\n",
325 			(fifo & 7) ? 32 : 8, ram_split[(fifo >> 16) & 3],
326 			if_names[dev->if_port]);
327 	return 0;
328 
329 failed:
330 	tc589_release(link);
331 	return -ENODEV;
332 } /* tc589_config */
333 
334 static void tc589_release(struct pcmcia_device *link)
335 {
336 	pcmcia_disable_device(link);
337 }
338 
339 static int tc589_suspend(struct pcmcia_device *link)
340 {
341 	struct net_device *dev = link->priv;
342 
343 	if (link->open)
344 		netif_device_detach(dev);
345 
346 	return 0;
347 }
348 
349 static int tc589_resume(struct pcmcia_device *link)
350 {
351 	struct net_device *dev = link->priv;
352 
353 	if (link->open) {
354 		tc589_reset(dev);
355 		netif_device_attach(dev);
356 	}
357 
358 	return 0;
359 }
360 
361 /*====================================================================*/
362 
363 /* Use this for commands that may take time to finish */
364 
365 static void tc589_wait_for_completion(struct net_device *dev, int cmd)
366 {
367 	int i = 100;
368 	outw(cmd, dev->base_addr + EL3_CMD);
369 	while (--i > 0)
370 		if (!(inw(dev->base_addr + EL3_STATUS) & 0x1000))
371 			break;
372 	if (i == 0)
373 		netdev_warn(dev, "command 0x%04x did not complete!\n", cmd);
374 }
375 
376 /* Read a word from the EEPROM using the regular EEPROM access register.
377  * Assume that we are in register window zero.
378  */
379 
380 static u16 read_eeprom(unsigned int ioaddr, int index)
381 {
382 	int i;
383 	outw(EEPROM_READ + index, ioaddr + 10);
384 	/* Reading the eeprom takes 162 us */
385 	for (i = 1620; i >= 0; i--)
386 		if ((inw(ioaddr + 10) & EEPROM_BUSY) == 0)
387 			break;
388 	return inw(ioaddr + 12);
389 }
390 
391 /* Set transceiver type, perhaps to something other than what the user
392  * specified in dev->if_port.
393  */
394 
395 static void tc589_set_xcvr(struct net_device *dev, int if_port)
396 {
397 	struct el3_private *lp = netdev_priv(dev);
398 	unsigned int ioaddr = dev->base_addr;
399 
400 	EL3WINDOW(0);
401 	switch (if_port) {
402 	case 0:
403 	case 1:
404 		outw(0, ioaddr + 6);
405 		break;
406 	case 2:
407 		outw(3<<14, ioaddr + 6);
408 		break;
409 	case 3:
410 		outw(1<<14, ioaddr + 6);
411 		break;
412 	}
413 	/* On PCMCIA, this just turns on the LED */
414 	outw((if_port == 2) ? StartCoax : StopCoax, ioaddr + EL3_CMD);
415 	/* 10baseT interface, enable link beat and jabber check. */
416 	EL3WINDOW(4);
417 	outw(MEDIA_LED | ((if_port < 2) ? MEDIA_TP : 0), ioaddr + WN4_MEDIA);
418 	EL3WINDOW(1);
419 	if (if_port == 2)
420 		lp->media_status = ((dev->if_port == 0) ? 0x8000 : 0x4000);
421 	else
422 		lp->media_status = ((dev->if_port == 0) ? 0x4010 : 0x8800);
423 }
424 
425 static void dump_status(struct net_device *dev)
426 {
427 	unsigned int ioaddr = dev->base_addr;
428 	EL3WINDOW(1);
429 	netdev_info(dev, "  irq status %04x, rx status %04x, tx status %02x  tx free %04x\n",
430 			inw(ioaddr+EL3_STATUS), inw(ioaddr+RX_STATUS),
431 			inb(ioaddr+TX_STATUS), inw(ioaddr+TX_FREE));
432 	EL3WINDOW(4);
433 	netdev_info(dev, "  diagnostics: fifo %04x net %04x ethernet %04x media %04x\n",
434 			inw(ioaddr+0x04), inw(ioaddr+0x06), inw(ioaddr+0x08),
435 			inw(ioaddr+0x0a));
436 	EL3WINDOW(1);
437 }
438 
439 /* Reset and restore all of the 3c589 registers. */
440 static void tc589_reset(struct net_device *dev)
441 {
442 	unsigned int ioaddr = dev->base_addr;
443 	int i;
444 
445 	EL3WINDOW(0);
446 	outw(0x0001, ioaddr + 4);			/* Activate board. */
447 	outw(0x3f00, ioaddr + 8);			/* Set the IRQ line. */
448 
449 	/* Set the station address in window 2. */
450 	EL3WINDOW(2);
451 	for (i = 0; i < 6; i++)
452 		outb(dev->dev_addr[i], ioaddr + i);
453 
454 	tc589_set_xcvr(dev, dev->if_port);
455 
456 	/* Switch to the stats window, and clear all stats by reading. */
457 	outw(StatsDisable, ioaddr + EL3_CMD);
458 	EL3WINDOW(6);
459 	for (i = 0; i < 9; i++)
460 		inb(ioaddr+i);
461 	inw(ioaddr + 10);
462 	inw(ioaddr + 12);
463 
464 	/* Switch to register set 1 for normal use. */
465 	EL3WINDOW(1);
466 
467 	set_rx_mode(dev);
468 	outw(StatsEnable, ioaddr + EL3_CMD); /* Turn on statistics. */
469 	outw(RxEnable, ioaddr + EL3_CMD); /* Enable the receiver. */
470 	outw(TxEnable, ioaddr + EL3_CMD); /* Enable transmitter. */
471 	/* Allow status bits to be seen. */
472 	outw(SetStatusEnb | 0xff, ioaddr + EL3_CMD);
473 	/* Ack all pending events, and set active indicator mask. */
474 	outw(AckIntr | IntLatch | TxAvailable | RxEarly | IntReq,
475 	 ioaddr + EL3_CMD);
476 	outw(SetIntrEnb | IntLatch | TxAvailable | RxComplete | StatsFull
477 	 | AdapterFailure, ioaddr + EL3_CMD);
478 }
479 
480 static void netdev_get_drvinfo(struct net_device *dev,
481 			       struct ethtool_drvinfo *info)
482 {
483 	strlcpy(info->driver, DRV_NAME, sizeof(info->driver));
484 	snprintf(info->bus_info, sizeof(info->bus_info),
485 		"PCMCIA 0x%lx", dev->base_addr);
486 }
487 
488 static const struct ethtool_ops netdev_ethtool_ops = {
489 	.get_drvinfo		= netdev_get_drvinfo,
490 };
491 
492 static int el3_config(struct net_device *dev, struct ifmap *map)
493 {
494 	if ((map->port != (u_char)(-1)) && (map->port != dev->if_port)) {
495 		if (map->port <= 3) {
496 			dev->if_port = map->port;
497 			netdev_info(dev, "switched to %s port\n", if_names[dev->if_port]);
498 			tc589_set_xcvr(dev, dev->if_port);
499 		} else {
500 			return -EINVAL;
501 		}
502 	}
503 	return 0;
504 }
505 
506 static int el3_open(struct net_device *dev)
507 {
508 	struct el3_private *lp = netdev_priv(dev);
509 	struct pcmcia_device *link = lp->p_dev;
510 
511 	if (!pcmcia_dev_present(link))
512 		return -ENODEV;
513 
514 	link->open++;
515 	netif_start_queue(dev);
516 
517 	tc589_reset(dev);
518 	timer_setup(&lp->media, media_check, 0);
519 	mod_timer(&lp->media, jiffies + HZ);
520 
521 	dev_dbg(&link->dev, "%s: opened, status %4.4x.\n",
522 	  dev->name, inw(dev->base_addr + EL3_STATUS));
523 
524 	return 0;
525 }
526 
527 static void el3_tx_timeout(struct net_device *dev, unsigned int txqueue)
528 {
529 	unsigned int ioaddr = dev->base_addr;
530 
531 	netdev_warn(dev, "Transmit timed out!\n");
532 	dump_status(dev);
533 	dev->stats.tx_errors++;
534 	netif_trans_update(dev); /* prevent tx timeout */
535 	/* Issue TX_RESET and TX_START commands. */
536 	tc589_wait_for_completion(dev, TxReset);
537 	outw(TxEnable, ioaddr + EL3_CMD);
538 	netif_wake_queue(dev);
539 }
540 
541 static void pop_tx_status(struct net_device *dev)
542 {
543 	unsigned int ioaddr = dev->base_addr;
544 	int i;
545 
546 	/* Clear the Tx status stack. */
547 	for (i = 32; i > 0; i--) {
548 		u_char tx_status = inb(ioaddr + TX_STATUS);
549 		if (!(tx_status & 0x84))
550 			break;
551 		/* reset transmitter on jabber error or underrun */
552 		if (tx_status & 0x30)
553 			tc589_wait_for_completion(dev, TxReset);
554 		if (tx_status & 0x38) {
555 			netdev_dbg(dev, "transmit error: status 0x%02x\n", tx_status);
556 			outw(TxEnable, ioaddr + EL3_CMD);
557 			dev->stats.tx_aborted_errors++;
558 		}
559 		outb(0x00, ioaddr + TX_STATUS); /* Pop the status stack. */
560 	}
561 }
562 
563 static netdev_tx_t el3_start_xmit(struct sk_buff *skb,
564 					struct net_device *dev)
565 {
566 	unsigned int ioaddr = dev->base_addr;
567 	struct el3_private *priv = netdev_priv(dev);
568 	unsigned long flags;
569 
570 	netdev_dbg(dev, "el3_start_xmit(length = %ld) called, status %4.4x.\n",
571 	       (long)skb->len, inw(ioaddr + EL3_STATUS));
572 
573 	spin_lock_irqsave(&priv->lock, flags);
574 
575 	dev->stats.tx_bytes += skb->len;
576 
577 	/* Put out the doubleword header... */
578 	outw(skb->len, ioaddr + TX_FIFO);
579 	outw(0x00, ioaddr + TX_FIFO);
580 	/* ... and the packet rounded to a doubleword. */
581 	outsl(ioaddr + TX_FIFO, skb->data, (skb->len + 3) >> 2);
582 
583 	if (inw(ioaddr + TX_FREE) <= 1536) {
584 		netif_stop_queue(dev);
585 		/* Interrupt us when the FIFO has room for max-sized packet. */
586 		outw(SetTxThreshold + 1536, ioaddr + EL3_CMD);
587 	}
588 
589 	pop_tx_status(dev);
590 	spin_unlock_irqrestore(&priv->lock, flags);
591 	dev_kfree_skb(skb);
592 
593 	return NETDEV_TX_OK;
594 }
595 
596 /* The EL3 interrupt handler. */
597 static irqreturn_t el3_interrupt(int irq, void *dev_id)
598 {
599 	struct net_device *dev = (struct net_device *) dev_id;
600 	struct el3_private *lp = netdev_priv(dev);
601 	unsigned int ioaddr;
602 	__u16 status;
603 	int i = 0, handled = 1;
604 
605 	if (!netif_device_present(dev))
606 		return IRQ_NONE;
607 
608 	ioaddr = dev->base_addr;
609 
610 	netdev_dbg(dev, "interrupt, status %4.4x.\n", inw(ioaddr + EL3_STATUS));
611 
612 	spin_lock(&lp->lock);
613 	while ((status = inw(ioaddr + EL3_STATUS)) &
614 	(IntLatch | RxComplete | StatsFull)) {
615 		if ((status & 0xe000) != 0x2000) {
616 			netdev_dbg(dev, "interrupt from dead card\n");
617 			handled = 0;
618 			break;
619 		}
620 		if (status & RxComplete)
621 			el3_rx(dev);
622 		if (status & TxAvailable) {
623 			netdev_dbg(dev, "    TX room bit was handled.\n");
624 			/* There's room in the FIFO for a full-sized packet. */
625 			outw(AckIntr | TxAvailable, ioaddr + EL3_CMD);
626 			netif_wake_queue(dev);
627 		}
628 		if (status & TxComplete)
629 			pop_tx_status(dev);
630 		if (status & (AdapterFailure | RxEarly | StatsFull)) {
631 			/* Handle all uncommon interrupts. */
632 			if (status & StatsFull)		/* Empty statistics. */
633 				update_stats(dev);
634 			if (status & RxEarly) {
635 				/* Rx early is unused. */
636 				el3_rx(dev);
637 				outw(AckIntr | RxEarly, ioaddr + EL3_CMD);
638 			}
639 			if (status & AdapterFailure) {
640 				u16 fifo_diag;
641 				EL3WINDOW(4);
642 				fifo_diag = inw(ioaddr + 4);
643 				EL3WINDOW(1);
644 				netdev_warn(dev, "adapter failure, FIFO diagnostic register %04x.\n",
645 			    fifo_diag);
646 				if (fifo_diag & 0x0400) {
647 					/* Tx overrun */
648 					tc589_wait_for_completion(dev, TxReset);
649 					outw(TxEnable, ioaddr + EL3_CMD);
650 				}
651 				if (fifo_diag & 0x2000) {
652 					/* Rx underrun */
653 					tc589_wait_for_completion(dev, RxReset);
654 					set_rx_mode(dev);
655 					outw(RxEnable, ioaddr + EL3_CMD);
656 				}
657 				outw(AckIntr | AdapterFailure, ioaddr + EL3_CMD);
658 			}
659 		}
660 		if (++i > 10) {
661 			netdev_err(dev, "infinite loop in interrupt, status %4.4x.\n",
662 					status);
663 			/* Clear all interrupts */
664 			outw(AckIntr | 0xFF, ioaddr + EL3_CMD);
665 			break;
666 		}
667 		/* Acknowledge the IRQ. */
668 		outw(AckIntr | IntReq | IntLatch, ioaddr + EL3_CMD);
669 	}
670 	lp->last_irq = jiffies;
671 	spin_unlock(&lp->lock);
672 	netdev_dbg(dev, "exiting interrupt, status %4.4x.\n",
673 			inw(ioaddr + EL3_STATUS));
674 	return IRQ_RETVAL(handled);
675 }
676 
677 static void media_check(struct timer_list *t)
678 {
679 	struct el3_private *lp = from_timer(lp, t, media);
680 	struct net_device *dev = lp->p_dev->priv;
681 	unsigned int ioaddr = dev->base_addr;
682 	u16 media, errs;
683 	unsigned long flags;
684 
685 	if (!netif_device_present(dev))
686 		goto reschedule;
687 
688 	/* Check for pending interrupt with expired latency timer: with
689 	 * this, we can limp along even if the interrupt is blocked
690 	 */
691 	if ((inw(ioaddr + EL3_STATUS) & IntLatch) &&
692 	(inb(ioaddr + EL3_TIMER) == 0xff)) {
693 		if (!lp->fast_poll)
694 			netdev_warn(dev, "interrupt(s) dropped!\n");
695 
696 		local_irq_save(flags);
697 		el3_interrupt(dev->irq, dev);
698 		local_irq_restore(flags);
699 
700 		lp->fast_poll = HZ;
701 	}
702 	if (lp->fast_poll) {
703 		lp->fast_poll--;
704 		lp->media.expires = jiffies + HZ/100;
705 		add_timer(&lp->media);
706 		return;
707 	}
708 
709 	/* lp->lock guards the EL3 window. Window should always be 1 except
710 	 * when the lock is held
711 	 */
712 
713 	spin_lock_irqsave(&lp->lock, flags);
714 	EL3WINDOW(4);
715 	media = inw(ioaddr+WN4_MEDIA) & 0xc810;
716 
717 	/* Ignore collisions unless we've had no irq's recently */
718 	if (time_before(jiffies, lp->last_irq + HZ)) {
719 		media &= ~0x0010;
720 	} else {
721 		/* Try harder to detect carrier errors */
722 		EL3WINDOW(6);
723 		outw(StatsDisable, ioaddr + EL3_CMD);
724 		errs = inb(ioaddr + 0);
725 		outw(StatsEnable, ioaddr + EL3_CMD);
726 		dev->stats.tx_carrier_errors += errs;
727 		if (errs || (lp->media_status & 0x0010))
728 			media |= 0x0010;
729 	}
730 
731 	if (media != lp->media_status) {
732 		if ((media & lp->media_status & 0x8000) &&
733 				((lp->media_status ^ media) & 0x0800))
734 		netdev_info(dev, "%s link beat\n",
735 				(lp->media_status & 0x0800 ? "lost" : "found"));
736 		else if ((media & lp->media_status & 0x4000) &&
737 		 ((lp->media_status ^ media) & 0x0010))
738 		netdev_info(dev, "coax cable %s\n",
739 				(lp->media_status & 0x0010 ? "ok" : "problem"));
740 		if (dev->if_port == 0) {
741 			if (media & 0x8000) {
742 				if (media & 0x0800)
743 					netdev_info(dev, "flipped to 10baseT\n");
744 				else
745 			tc589_set_xcvr(dev, 2);
746 			} else if (media & 0x4000) {
747 				if (media & 0x0010)
748 					tc589_set_xcvr(dev, 1);
749 				else
750 					netdev_info(dev, "flipped to 10base2\n");
751 			}
752 		}
753 		lp->media_status = media;
754 	}
755 
756 	EL3WINDOW(1);
757 	spin_unlock_irqrestore(&lp->lock, flags);
758 
759 reschedule:
760 	lp->media.expires = jiffies + HZ;
761 	add_timer(&lp->media);
762 }
763 
764 static struct net_device_stats *el3_get_stats(struct net_device *dev)
765 {
766 	struct el3_private *lp = netdev_priv(dev);
767 	unsigned long flags;
768 	struct pcmcia_device *link = lp->p_dev;
769 
770 	if (pcmcia_dev_present(link)) {
771 		spin_lock_irqsave(&lp->lock, flags);
772 		update_stats(dev);
773 		spin_unlock_irqrestore(&lp->lock, flags);
774 	}
775 	return &dev->stats;
776 }
777 
778 /* Update statistics.  We change to register window 6, so this should be run
779 * single-threaded if the device is active. This is expected to be a rare
780 * operation, and it's simpler for the rest of the driver to assume that
781 * window 1 is always valid rather than use a special window-state variable.
782 *
783 * Caller must hold the lock for this
784 */
785 
786 static void update_stats(struct net_device *dev)
787 {
788 	unsigned int ioaddr = dev->base_addr;
789 
790 	netdev_dbg(dev, "updating the statistics.\n");
791 	/* Turn off statistics updates while reading. */
792 	outw(StatsDisable, ioaddr + EL3_CMD);
793 	/* Switch to the stats window, and read everything. */
794 	EL3WINDOW(6);
795 	dev->stats.tx_carrier_errors	+= inb(ioaddr + 0);
796 	dev->stats.tx_heartbeat_errors	+= inb(ioaddr + 1);
797 	/* Multiple collisions. */
798 	inb(ioaddr + 2);
799 	dev->stats.collisions		+= inb(ioaddr + 3);
800 	dev->stats.tx_window_errors		+= inb(ioaddr + 4);
801 	dev->stats.rx_fifo_errors		+= inb(ioaddr + 5);
802 	dev->stats.tx_packets		+= inb(ioaddr + 6);
803 	/* Rx packets   */
804 	inb(ioaddr + 7);
805 	/* Tx deferrals */
806 	inb(ioaddr + 8);
807 	/* Rx octets */
808 	inw(ioaddr + 10);
809 	/* Tx octets */
810 	inw(ioaddr + 12);
811 
812 	/* Back to window 1, and turn statistics back on. */
813 	EL3WINDOW(1);
814 	outw(StatsEnable, ioaddr + EL3_CMD);
815 }
816 
817 static int el3_rx(struct net_device *dev)
818 {
819 	unsigned int ioaddr = dev->base_addr;
820 	int worklimit = 32;
821 	short rx_status;
822 
823 	netdev_dbg(dev, "in rx_packet(), status %4.4x, rx_status %4.4x.\n",
824 	       inw(ioaddr+EL3_STATUS), inw(ioaddr+RX_STATUS));
825 	while (!((rx_status = inw(ioaddr + RX_STATUS)) & 0x8000) &&
826 		    worklimit > 0) {
827 		worklimit--;
828 		if (rx_status & 0x4000) { /* Error, update stats. */
829 			short error = rx_status & 0x3800;
830 			dev->stats.rx_errors++;
831 			switch (error) {
832 			case 0x0000:
833 				dev->stats.rx_over_errors++;
834 				break;
835 			case 0x0800:
836 				dev->stats.rx_length_errors++;
837 				break;
838 			case 0x1000:
839 				dev->stats.rx_frame_errors++;
840 				break;
841 			case 0x1800:
842 				dev->stats.rx_length_errors++;
843 				break;
844 			case 0x2000:
845 				dev->stats.rx_frame_errors++;
846 				break;
847 			case 0x2800:
848 				dev->stats.rx_crc_errors++;
849 				break;
850 			}
851 		} else {
852 			short pkt_len = rx_status & 0x7ff;
853 			struct sk_buff *skb;
854 
855 			skb = netdev_alloc_skb(dev, pkt_len + 5);
856 
857 			netdev_dbg(dev, "    Receiving packet size %d status %4.4x.\n",
858 		       pkt_len, rx_status);
859 			if (skb != NULL) {
860 				skb_reserve(skb, 2);
861 				insl(ioaddr+RX_FIFO, skb_put(skb, pkt_len),
862 			(pkt_len+3)>>2);
863 				skb->protocol = eth_type_trans(skb, dev);
864 				netif_rx(skb);
865 				dev->stats.rx_packets++;
866 				dev->stats.rx_bytes += pkt_len;
867 			} else {
868 				netdev_dbg(dev, "couldn't allocate a sk_buff of size %d.\n",
869 			   pkt_len);
870 				dev->stats.rx_dropped++;
871 			}
872 		}
873 		/* Pop the top of the Rx FIFO */
874 		tc589_wait_for_completion(dev, RxDiscard);
875 	}
876 	if (worklimit == 0)
877 		netdev_warn(dev, "too much work in el3_rx!\n");
878 	return 0;
879 }
880 
881 static void set_rx_mode(struct net_device *dev)
882 {
883 	unsigned int ioaddr = dev->base_addr;
884 	u16 opts = SetRxFilter | RxStation | RxBroadcast;
885 
886 	if (dev->flags & IFF_PROMISC)
887 		opts |= RxMulticast | RxProm;
888 	else if (!netdev_mc_empty(dev) || (dev->flags & IFF_ALLMULTI))
889 		opts |= RxMulticast;
890 	outw(opts, ioaddr + EL3_CMD);
891 }
892 
893 static void set_multicast_list(struct net_device *dev)
894 {
895 	struct el3_private *priv = netdev_priv(dev);
896 	unsigned long flags;
897 
898 	spin_lock_irqsave(&priv->lock, flags);
899 	set_rx_mode(dev);
900 	spin_unlock_irqrestore(&priv->lock, flags);
901 }
902 
903 static int el3_close(struct net_device *dev)
904 {
905 	struct el3_private *lp = netdev_priv(dev);
906 	struct pcmcia_device *link = lp->p_dev;
907 	unsigned int ioaddr = dev->base_addr;
908 
909 	dev_dbg(&link->dev, "%s: shutting down ethercard.\n", dev->name);
910 
911 	if (pcmcia_dev_present(link)) {
912 		/* Turn off statistics ASAP.  We update dev->stats below. */
913 		outw(StatsDisable, ioaddr + EL3_CMD);
914 
915 		/* Disable the receiver and transmitter. */
916 		outw(RxDisable, ioaddr + EL3_CMD);
917 		outw(TxDisable, ioaddr + EL3_CMD);
918 
919 		if (dev->if_port == 2)
920 			/* Turn off thinnet power.  Green! */
921 			outw(StopCoax, ioaddr + EL3_CMD);
922 		else if (dev->if_port == 1) {
923 			/* Disable link beat and jabber */
924 			EL3WINDOW(4);
925 			outw(0, ioaddr + WN4_MEDIA);
926 		}
927 
928 		/* Switching back to window 0 disables the IRQ. */
929 		EL3WINDOW(0);
930 		/* But we explicitly zero the IRQ line select anyway. */
931 		outw(0x0f00, ioaddr + WN0_IRQ);
932 
933 		/* Check if the card still exists */
934 		if ((inw(ioaddr+EL3_STATUS) & 0xe000) == 0x2000)
935 			update_stats(dev);
936 	}
937 
938 	link->open--;
939 	netif_stop_queue(dev);
940 	del_timer_sync(&lp->media);
941 
942 	return 0;
943 }
944 
945 static const struct pcmcia_device_id tc589_ids[] = {
946 	PCMCIA_MFC_DEVICE_MANF_CARD(0, 0x0101, 0x0562),
947 	PCMCIA_MFC_DEVICE_PROD_ID1(0, "Motorola MARQUIS", 0xf03e4e77),
948 	PCMCIA_DEVICE_MANF_CARD(0x0101, 0x0589),
949 	PCMCIA_DEVICE_PROD_ID12("Farallon", "ENet", 0x58d93fc4, 0x992c2202),
950 	PCMCIA_MFC_DEVICE_CIS_MANF_CARD(0, 0x0101, 0x0035, "cis/3CXEM556.cis"),
951 	PCMCIA_MFC_DEVICE_CIS_MANF_CARD(0, 0x0101, 0x003d, "cis/3CXEM556.cis"),
952 	PCMCIA_DEVICE_NULL,
953 };
954 MODULE_DEVICE_TABLE(pcmcia, tc589_ids);
955 
956 static struct pcmcia_driver tc589_driver = {
957 	.owner		= THIS_MODULE,
958 	.name		= "3c589_cs",
959 	.probe		= tc589_probe,
960 	.remove		= tc589_detach,
961 	.id_table	= tc589_ids,
962 	.suspend	= tc589_suspend,
963 	.resume		= tc589_resume,
964 };
965 module_pcmcia_driver(tc589_driver);
966