xref: /openbmc/linux/drivers/net/dummy.c (revision a1e58bbd)
1 /* dummy.c: a dummy net driver
2 
3 	The purpose of this driver is to provide a device to point a
4 	route through, but not to actually transmit packets.
5 
6 	Why?  If you have a machine whose only connection is an occasional
7 	PPP/SLIP/PLIP link, you can only connect to your own hostname
8 	when the link is up.  Otherwise you have to use localhost.
9 	This isn't very consistent.
10 
11 	One solution is to set up a dummy link using PPP/SLIP/PLIP,
12 	but this seems (to me) too much overhead for too little gain.
13 	This driver provides a small alternative. Thus you can do
14 
15 	[when not running slip]
16 		ifconfig dummy slip.addr.ess.here up
17 	[to go to slip]
18 		ifconfig dummy down
19 		dip whatever
20 
21 	This was written by looking at Donald Becker's skeleton driver
22 	and the loopback driver.  I then threw away anything that didn't
23 	apply!	Thanks to Alan Cox for the key clue on what to do with
24 	misguided packets.
25 
26 			Nick Holloway, 27th May 1994
27 	[I tweaked this explanation a little but that's all]
28 			Alan Cox, 30th May 1994
29 */
30 
31 #include <linux/module.h>
32 #include <linux/kernel.h>
33 #include <linux/netdevice.h>
34 #include <linux/etherdevice.h>
35 #include <linux/init.h>
36 #include <linux/moduleparam.h>
37 #include <linux/rtnetlink.h>
38 #include <net/rtnetlink.h>
39 
40 static int numdummies = 1;
41 
42 static int dummy_xmit(struct sk_buff *skb, struct net_device *dev);
43 
44 static int dummy_set_address(struct net_device *dev, void *p)
45 {
46 	struct sockaddr *sa = p;
47 
48 	if (!is_valid_ether_addr(sa->sa_data))
49 		return -EADDRNOTAVAIL;
50 
51 	memcpy(dev->dev_addr, sa->sa_data, ETH_ALEN);
52 	return 0;
53 }
54 
55 /* fake multicast ability */
56 static void set_multicast_list(struct net_device *dev)
57 {
58 }
59 
60 static void dummy_setup(struct net_device *dev)
61 {
62 	/* Initialize the device structure. */
63 	dev->hard_start_xmit = dummy_xmit;
64 	dev->set_multicast_list = set_multicast_list;
65 	dev->set_mac_address = dummy_set_address;
66 	dev->destructor = free_netdev;
67 
68 	/* Fill in device structure with ethernet-generic values. */
69 	ether_setup(dev);
70 	dev->tx_queue_len = 0;
71 	dev->change_mtu = NULL;
72 	dev->flags |= IFF_NOARP;
73 	dev->flags &= ~IFF_MULTICAST;
74 	random_ether_addr(dev->dev_addr);
75 }
76 
77 static int dummy_xmit(struct sk_buff *skb, struct net_device *dev)
78 {
79 	dev->stats.tx_packets++;
80 	dev->stats.tx_bytes += skb->len;
81 
82 	dev_kfree_skb(skb);
83 	return 0;
84 }
85 
86 static int dummy_validate(struct nlattr *tb[], struct nlattr *data[])
87 {
88 	if (tb[IFLA_ADDRESS]) {
89 		if (nla_len(tb[IFLA_ADDRESS]) != ETH_ALEN)
90 			return -EINVAL;
91 		if (!is_valid_ether_addr(nla_data(tb[IFLA_ADDRESS])))
92 			return -EADDRNOTAVAIL;
93 	}
94 	return 0;
95 }
96 
97 static struct rtnl_link_ops dummy_link_ops __read_mostly = {
98 	.kind		= "dummy",
99 	.setup		= dummy_setup,
100 	.validate	= dummy_validate,
101 };
102 
103 /* Number of dummy devices to be set up by this module. */
104 module_param(numdummies, int, 0);
105 MODULE_PARM_DESC(numdummies, "Number of dummy pseudo devices");
106 
107 static int __init dummy_init_one(void)
108 {
109 	struct net_device *dev_dummy;
110 	int err;
111 
112 	dev_dummy = alloc_netdev(0, "dummy%d", dummy_setup);
113 	if (!dev_dummy)
114 		return -ENOMEM;
115 
116 	err = dev_alloc_name(dev_dummy, dev_dummy->name);
117 	if (err < 0)
118 		goto err;
119 
120 	dev_dummy->rtnl_link_ops = &dummy_link_ops;
121 	err = register_netdevice(dev_dummy);
122 	if (err < 0)
123 		goto err;
124 	return 0;
125 
126 err:
127 	free_netdev(dev_dummy);
128 	return err;
129 }
130 
131 static int __init dummy_init_module(void)
132 {
133 	int i, err = 0;
134 
135 	rtnl_lock();
136 	err = __rtnl_link_register(&dummy_link_ops);
137 
138 	for (i = 0; i < numdummies && !err; i++)
139 		err = dummy_init_one();
140 	if (err < 0)
141 		__rtnl_link_unregister(&dummy_link_ops);
142 	rtnl_unlock();
143 
144 	return err;
145 }
146 
147 static void __exit dummy_cleanup_module(void)
148 {
149 	rtnl_link_unregister(&dummy_link_ops);
150 }
151 
152 module_init(dummy_init_module);
153 module_exit(dummy_cleanup_module);
154 MODULE_LICENSE("GPL");
155 MODULE_ALIAS_RTNL_LINK("dummy");
156