1 // SPDX-License-Identifier: GPL-2.0
2 /* DSA driver for:
3  * Vitesse VSC7385 SparX-G5 5+1-port Integrated Gigabit Ethernet Switch
4  * Vitesse VSC7388 SparX-G8 8-port Integrated Gigabit Ethernet Switch
5  * Vitesse VSC7395 SparX-G5e 5+1-port Integrated Gigabit Ethernet Switch
6  * Vitesse VSC7398 SparX-G8e 8-port Integrated Gigabit Ethernet Switch
7  *
8  * These switches have a built-in 8051 CPU and can download and execute a
9  * firmware in this CPU. They can also be configured to use an external CPU
10  * handling the switch in a memory-mapped manner by connecting to that external
11  * CPU's memory bus.
12  *
13  * Copyright (C) 2018 Linus Wallej <linus.walleij@linaro.org>
14  * Includes portions of code from the firmware uploader by:
15  * Copyright (C) 2009 Gabor Juhos <juhosg@openwrt.org>
16  */
17 #include <linux/kernel.h>
18 #include <linux/module.h>
19 #include <linux/device.h>
20 #include <linux/of.h>
21 #include <linux/of_device.h>
22 #include <linux/of_mdio.h>
23 #include <linux/bitops.h>
24 #include <linux/if_bridge.h>
25 #include <linux/etherdevice.h>
26 #include <linux/gpio/consumer.h>
27 #include <linux/gpio/driver.h>
28 #include <linux/random.h>
29 #include <net/dsa.h>
30 
31 #include "vitesse-vsc73xx.h"
32 
33 #define VSC73XX_BLOCK_MAC	0x1 /* Subblocks 0-4, 6 (CPU port) */
34 #define VSC73XX_BLOCK_ANALYZER	0x2 /* Only subblock 0 */
35 #define VSC73XX_BLOCK_MII	0x3 /* Subblocks 0 and 1 */
36 #define VSC73XX_BLOCK_MEMINIT	0x3 /* Only subblock 2 */
37 #define VSC73XX_BLOCK_CAPTURE	0x4 /* Only subblock 2 */
38 #define VSC73XX_BLOCK_ARBITER	0x5 /* Only subblock 0 */
39 #define VSC73XX_BLOCK_SYSTEM	0x7 /* Only subblock 0 */
40 
41 #define CPU_PORT	6 /* CPU port */
42 
43 /* MAC Block registers */
44 #define VSC73XX_MAC_CFG		0x00
45 #define VSC73XX_MACHDXGAP	0x02
46 #define VSC73XX_FCCONF		0x04
47 #define VSC73XX_FCMACHI		0x08
48 #define VSC73XX_FCMACLO		0x0c
49 #define VSC73XX_MAXLEN		0x10
50 #define VSC73XX_ADVPORTM	0x19
51 #define VSC73XX_TXUPDCFG	0x24
52 #define VSC73XX_TXQ_SELECT_CFG	0x28
53 #define VSC73XX_RXOCT		0x50
54 #define VSC73XX_TXOCT		0x51
55 #define VSC73XX_C_RX0		0x52
56 #define VSC73XX_C_RX1		0x53
57 #define VSC73XX_C_RX2		0x54
58 #define VSC73XX_C_TX0		0x55
59 #define VSC73XX_C_TX1		0x56
60 #define VSC73XX_C_TX2		0x57
61 #define VSC73XX_C_CFG		0x58
62 #define VSC73XX_CAT_DROP	0x6e
63 #define VSC73XX_CAT_PR_MISC_L2	0x6f
64 #define VSC73XX_CAT_PR_USR_PRIO	0x75
65 #define VSC73XX_Q_MISC_CONF	0xdf
66 
67 /* MAC_CFG register bits */
68 #define VSC73XX_MAC_CFG_WEXC_DIS	BIT(31)
69 #define VSC73XX_MAC_CFG_PORT_RST	BIT(29)
70 #define VSC73XX_MAC_CFG_TX_EN		BIT(28)
71 #define VSC73XX_MAC_CFG_SEED_LOAD	BIT(27)
72 #define VSC73XX_MAC_CFG_SEED_MASK	GENMASK(26, 19)
73 #define VSC73XX_MAC_CFG_SEED_OFFSET	19
74 #define VSC73XX_MAC_CFG_FDX		BIT(18)
75 #define VSC73XX_MAC_CFG_GIGA_MODE	BIT(17)
76 #define VSC73XX_MAC_CFG_RX_EN		BIT(16)
77 #define VSC73XX_MAC_CFG_VLAN_DBLAWR	BIT(15)
78 #define VSC73XX_MAC_CFG_VLAN_AWR	BIT(14)
79 #define VSC73XX_MAC_CFG_100_BASE_T	BIT(13) /* Not in manual */
80 #define VSC73XX_MAC_CFG_TX_IPG_MASK	GENMASK(10, 6)
81 #define VSC73XX_MAC_CFG_TX_IPG_OFFSET	6
82 #define VSC73XX_MAC_CFG_TX_IPG_1000M	(6 << VSC73XX_MAC_CFG_TX_IPG_OFFSET)
83 #define VSC73XX_MAC_CFG_TX_IPG_100_10M	(17 << VSC73XX_MAC_CFG_TX_IPG_OFFSET)
84 #define VSC73XX_MAC_CFG_MAC_RX_RST	BIT(5)
85 #define VSC73XX_MAC_CFG_MAC_TX_RST	BIT(4)
86 #define VSC73XX_MAC_CFG_CLK_SEL_MASK	GENMASK(2, 0)
87 #define VSC73XX_MAC_CFG_CLK_SEL_OFFSET	0
88 #define VSC73XX_MAC_CFG_CLK_SEL_1000M	1
89 #define VSC73XX_MAC_CFG_CLK_SEL_100M	2
90 #define VSC73XX_MAC_CFG_CLK_SEL_10M	3
91 #define VSC73XX_MAC_CFG_CLK_SEL_EXT	4
92 
93 #define VSC73XX_MAC_CFG_1000M_F_PHY	(VSC73XX_MAC_CFG_FDX | \
94 					 VSC73XX_MAC_CFG_GIGA_MODE | \
95 					 VSC73XX_MAC_CFG_TX_IPG_1000M | \
96 					 VSC73XX_MAC_CFG_CLK_SEL_EXT)
97 #define VSC73XX_MAC_CFG_100_10M_F_PHY	(VSC73XX_MAC_CFG_FDX | \
98 					 VSC73XX_MAC_CFG_TX_IPG_100_10M | \
99 					 VSC73XX_MAC_CFG_CLK_SEL_EXT)
100 #define VSC73XX_MAC_CFG_100_10M_H_PHY	(VSC73XX_MAC_CFG_TX_IPG_100_10M | \
101 					 VSC73XX_MAC_CFG_CLK_SEL_EXT)
102 #define VSC73XX_MAC_CFG_1000M_F_RGMII	(VSC73XX_MAC_CFG_FDX | \
103 					 VSC73XX_MAC_CFG_GIGA_MODE | \
104 					 VSC73XX_MAC_CFG_TX_IPG_1000M | \
105 					 VSC73XX_MAC_CFG_CLK_SEL_1000M)
106 #define VSC73XX_MAC_CFG_RESET		(VSC73XX_MAC_CFG_PORT_RST | \
107 					 VSC73XX_MAC_CFG_MAC_RX_RST | \
108 					 VSC73XX_MAC_CFG_MAC_TX_RST)
109 
110 /* Flow control register bits */
111 #define VSC73XX_FCCONF_ZERO_PAUSE_EN	BIT(17)
112 #define VSC73XX_FCCONF_FLOW_CTRL_OBEY	BIT(16)
113 #define VSC73XX_FCCONF_PAUSE_VAL_MASK	GENMASK(15, 0)
114 
115 /* ADVPORTM advanced port setup register bits */
116 #define VSC73XX_ADVPORTM_IFG_PPM	BIT(7)
117 #define VSC73XX_ADVPORTM_EXC_COL_CONT	BIT(6)
118 #define VSC73XX_ADVPORTM_EXT_PORT	BIT(5)
119 #define VSC73XX_ADVPORTM_INV_GTX	BIT(4)
120 #define VSC73XX_ADVPORTM_ENA_GTX	BIT(3)
121 #define VSC73XX_ADVPORTM_DDR_MODE	BIT(2)
122 #define VSC73XX_ADVPORTM_IO_LOOPBACK	BIT(1)
123 #define VSC73XX_ADVPORTM_HOST_LOOPBACK	BIT(0)
124 
125 /* CAT_DROP categorizer frame dropping register bits */
126 #define VSC73XX_CAT_DROP_DROP_MC_SMAC_ENA	BIT(6)
127 #define VSC73XX_CAT_DROP_FWD_CTRL_ENA		BIT(4)
128 #define VSC73XX_CAT_DROP_FWD_PAUSE_ENA		BIT(3)
129 #define VSC73XX_CAT_DROP_UNTAGGED_ENA		BIT(2)
130 #define VSC73XX_CAT_DROP_TAGGED_ENA		BIT(1)
131 #define VSC73XX_CAT_DROP_NULL_MAC_ENA		BIT(0)
132 
133 #define VSC73XX_Q_MISC_CONF_EXTENT_MEM		BIT(31)
134 #define VSC73XX_Q_MISC_CONF_EARLY_TX_MASK	GENMASK(4, 1)
135 #define VSC73XX_Q_MISC_CONF_EARLY_TX_512	(1 << 1)
136 #define VSC73XX_Q_MISC_CONF_MAC_PAUSE_MODE	BIT(0)
137 
138 /* Frame analyzer block 2 registers */
139 #define VSC73XX_STORMLIMIT	0x02
140 #define VSC73XX_ADVLEARN	0x03
141 #define VSC73XX_IFLODMSK	0x04
142 #define VSC73XX_VLANMASK	0x05
143 #define VSC73XX_MACHDATA	0x06
144 #define VSC73XX_MACLDATA	0x07
145 #define VSC73XX_ANMOVED		0x08
146 #define VSC73XX_ANAGEFIL	0x09
147 #define VSC73XX_ANEVENTS	0x0a
148 #define VSC73XX_ANCNTMASK	0x0b
149 #define VSC73XX_ANCNTVAL	0x0c
150 #define VSC73XX_LEARNMASK	0x0d
151 #define VSC73XX_UFLODMASK	0x0e
152 #define VSC73XX_MFLODMASK	0x0f
153 #define VSC73XX_RECVMASK	0x10
154 #define VSC73XX_AGGRCTRL	0x20
155 #define VSC73XX_AGGRMSKS	0x30 /* Until 0x3f */
156 #define VSC73XX_DSTMASKS	0x40 /* Until 0x7f */
157 #define VSC73XX_SRCMASKS	0x80 /* Until 0x87 */
158 #define VSC73XX_CAPENAB		0xa0
159 #define VSC73XX_MACACCESS	0xb0
160 #define VSC73XX_IPMCACCESS	0xb1
161 #define VSC73XX_MACTINDX	0xc0
162 #define VSC73XX_VLANACCESS	0xd0
163 #define VSC73XX_VLANTIDX	0xe0
164 #define VSC73XX_AGENCTRL	0xf0
165 #define VSC73XX_CAPRST		0xff
166 
167 #define VSC73XX_MACACCESS_CPU_COPY		BIT(14)
168 #define VSC73XX_MACACCESS_FWD_KILL		BIT(13)
169 #define VSC73XX_MACACCESS_IGNORE_VLAN		BIT(12)
170 #define VSC73XX_MACACCESS_AGED_FLAG		BIT(11)
171 #define VSC73XX_MACACCESS_VALID			BIT(10)
172 #define VSC73XX_MACACCESS_LOCKED		BIT(9)
173 #define VSC73XX_MACACCESS_DEST_IDX_MASK		GENMASK(8, 3)
174 #define VSC73XX_MACACCESS_CMD_MASK		GENMASK(2, 0)
175 #define VSC73XX_MACACCESS_CMD_IDLE		0
176 #define VSC73XX_MACACCESS_CMD_LEARN		1
177 #define VSC73XX_MACACCESS_CMD_FORGET		2
178 #define VSC73XX_MACACCESS_CMD_AGE_TABLE		3
179 #define VSC73XX_MACACCESS_CMD_FLUSH_TABLE	4
180 #define VSC73XX_MACACCESS_CMD_CLEAR_TABLE	5
181 #define VSC73XX_MACACCESS_CMD_READ_ENTRY	6
182 #define VSC73XX_MACACCESS_CMD_WRITE_ENTRY	7
183 
184 #define VSC73XX_VLANACCESS_LEARN_DISABLED	BIT(30)
185 #define VSC73XX_VLANACCESS_VLAN_MIRROR		BIT(29)
186 #define VSC73XX_VLANACCESS_VLAN_SRC_CHECK	BIT(28)
187 #define VSC73XX_VLANACCESS_VLAN_PORT_MASK	GENMASK(9, 2)
188 #define VSC73XX_VLANACCESS_VLAN_TBL_CMD_MASK	GENMASK(2, 0)
189 #define VSC73XX_VLANACCESS_VLAN_TBL_CMD_IDLE	0
190 #define VSC73XX_VLANACCESS_VLAN_TBL_CMD_READ_ENTRY	1
191 #define VSC73XX_VLANACCESS_VLAN_TBL_CMD_WRITE_ENTRY	2
192 #define VSC73XX_VLANACCESS_VLAN_TBL_CMD_CLEAR_TABLE	3
193 
194 /* MII block 3 registers */
195 #define VSC73XX_MII_STAT	0x0
196 #define VSC73XX_MII_CMD		0x1
197 #define VSC73XX_MII_DATA	0x2
198 
199 /* Arbiter block 5 registers */
200 #define VSC73XX_ARBEMPTY		0x0c
201 #define VSC73XX_ARBDISC			0x0e
202 #define VSC73XX_SBACKWDROP		0x12
203 #define VSC73XX_DBACKWDROP		0x13
204 #define VSC73XX_ARBBURSTPROB		0x15
205 
206 /* System block 7 registers */
207 #define VSC73XX_ICPU_SIPAD		0x01
208 #define VSC73XX_GMIIDELAY		0x05
209 #define VSC73XX_ICPU_CTRL		0x10
210 #define VSC73XX_ICPU_ADDR		0x11
211 #define VSC73XX_ICPU_SRAM		0x12
212 #define VSC73XX_HWSEM			0x13
213 #define VSC73XX_GLORESET		0x14
214 #define VSC73XX_ICPU_MBOX_VAL		0x15
215 #define VSC73XX_ICPU_MBOX_SET		0x16
216 #define VSC73XX_ICPU_MBOX_CLR		0x17
217 #define VSC73XX_CHIPID			0x18
218 #define VSC73XX_GPIO			0x34
219 
220 #define VSC73XX_GMIIDELAY_GMII0_GTXDELAY_NONE	0
221 #define VSC73XX_GMIIDELAY_GMII0_GTXDELAY_1_4_NS	1
222 #define VSC73XX_GMIIDELAY_GMII0_GTXDELAY_1_7_NS	2
223 #define VSC73XX_GMIIDELAY_GMII0_GTXDELAY_2_0_NS	3
224 
225 #define VSC73XX_GMIIDELAY_GMII0_RXDELAY_NONE	(0 << 4)
226 #define VSC73XX_GMIIDELAY_GMII0_RXDELAY_1_4_NS	(1 << 4)
227 #define VSC73XX_GMIIDELAY_GMII0_RXDELAY_1_7_NS	(2 << 4)
228 #define VSC73XX_GMIIDELAY_GMII0_RXDELAY_2_0_NS	(3 << 4)
229 
230 #define VSC73XX_ICPU_CTRL_WATCHDOG_RST	BIT(31)
231 #define VSC73XX_ICPU_CTRL_CLK_DIV_MASK	GENMASK(12, 8)
232 #define VSC73XX_ICPU_CTRL_SRST_HOLD	BIT(7)
233 #define VSC73XX_ICPU_CTRL_ICPU_PI_EN	BIT(6)
234 #define VSC73XX_ICPU_CTRL_BOOT_EN	BIT(3)
235 #define VSC73XX_ICPU_CTRL_EXT_ACC_EN	BIT(2)
236 #define VSC73XX_ICPU_CTRL_CLK_EN	BIT(1)
237 #define VSC73XX_ICPU_CTRL_SRST		BIT(0)
238 
239 #define VSC73XX_CHIPID_ID_SHIFT		12
240 #define VSC73XX_CHIPID_ID_MASK		0xffff
241 #define VSC73XX_CHIPID_REV_SHIFT	28
242 #define VSC73XX_CHIPID_REV_MASK		0xf
243 #define VSC73XX_CHIPID_ID_7385		0x7385
244 #define VSC73XX_CHIPID_ID_7388		0x7388
245 #define VSC73XX_CHIPID_ID_7395		0x7395
246 #define VSC73XX_CHIPID_ID_7398		0x7398
247 
248 #define VSC73XX_GLORESET_STROBE		BIT(4)
249 #define VSC73XX_GLORESET_ICPU_LOCK	BIT(3)
250 #define VSC73XX_GLORESET_MEM_LOCK	BIT(2)
251 #define VSC73XX_GLORESET_PHY_RESET	BIT(1)
252 #define VSC73XX_GLORESET_MASTER_RESET	BIT(0)
253 
254 #define VSC7385_CLOCK_DELAY		((3 << 4) | 3)
255 #define VSC7385_CLOCK_DELAY_MASK	((3 << 4) | 3)
256 
257 #define VSC73XX_ICPU_CTRL_STOP	(VSC73XX_ICPU_CTRL_SRST_HOLD | \
258 				 VSC73XX_ICPU_CTRL_BOOT_EN | \
259 				 VSC73XX_ICPU_CTRL_EXT_ACC_EN)
260 
261 #define VSC73XX_ICPU_CTRL_START	(VSC73XX_ICPU_CTRL_CLK_DIV | \
262 				 VSC73XX_ICPU_CTRL_BOOT_EN | \
263 				 VSC73XX_ICPU_CTRL_CLK_EN | \
264 				 VSC73XX_ICPU_CTRL_SRST)
265 
266 #define IS_7385(a) ((a)->chipid == VSC73XX_CHIPID_ID_7385)
267 #define IS_7388(a) ((a)->chipid == VSC73XX_CHIPID_ID_7388)
268 #define IS_7395(a) ((a)->chipid == VSC73XX_CHIPID_ID_7395)
269 #define IS_7398(a) ((a)->chipid == VSC73XX_CHIPID_ID_7398)
270 #define IS_739X(a) (IS_7395(a) || IS_7398(a))
271 
272 struct vsc73xx_counter {
273 	u8 counter;
274 	const char *name;
275 };
276 
277 /* Counters are named according to the MIB standards where applicable.
278  * Some counters are custom, non-standard. The standard counters are
279  * named in accordance with RFC2819, RFC2021 and IEEE Std 802.3-2002 Annex
280  * 30A Counters.
281  */
282 static const struct vsc73xx_counter vsc73xx_rx_counters[] = {
283 	{ 0, "RxEtherStatsPkts" },
284 	{ 1, "RxBroadcast+MulticastPkts" }, /* non-standard counter */
285 	{ 2, "RxTotalErrorPackets" }, /* non-standard counter */
286 	{ 3, "RxEtherStatsBroadcastPkts" },
287 	{ 4, "RxEtherStatsMulticastPkts" },
288 	{ 5, "RxEtherStatsPkts64Octets" },
289 	{ 6, "RxEtherStatsPkts65to127Octets" },
290 	{ 7, "RxEtherStatsPkts128to255Octets" },
291 	{ 8, "RxEtherStatsPkts256to511Octets" },
292 	{ 9, "RxEtherStatsPkts512to1023Octets" },
293 	{ 10, "RxEtherStatsPkts1024to1518Octets" },
294 	{ 11, "RxJumboFrames" }, /* non-standard counter */
295 	{ 12, "RxaPauseMACControlFramesTransmitted" },
296 	{ 13, "RxFIFODrops" }, /* non-standard counter */
297 	{ 14, "RxBackwardDrops" }, /* non-standard counter */
298 	{ 15, "RxClassifierDrops" }, /* non-standard counter */
299 	{ 16, "RxEtherStatsCRCAlignErrors" },
300 	{ 17, "RxEtherStatsUndersizePkts" },
301 	{ 18, "RxEtherStatsOversizePkts" },
302 	{ 19, "RxEtherStatsFragments" },
303 	{ 20, "RxEtherStatsJabbers" },
304 	{ 21, "RxaMACControlFramesReceived" },
305 	/* 22-24 are undefined */
306 	{ 25, "RxaFramesReceivedOK" },
307 	{ 26, "RxQoSClass0" }, /* non-standard counter */
308 	{ 27, "RxQoSClass1" }, /* non-standard counter */
309 	{ 28, "RxQoSClass2" }, /* non-standard counter */
310 	{ 29, "RxQoSClass3" }, /* non-standard counter */
311 };
312 
313 static const struct vsc73xx_counter vsc73xx_tx_counters[] = {
314 	{ 0, "TxEtherStatsPkts" },
315 	{ 1, "TxBroadcast+MulticastPkts" }, /* non-standard counter */
316 	{ 2, "TxTotalErrorPackets" }, /* non-standard counter */
317 	{ 3, "TxEtherStatsBroadcastPkts" },
318 	{ 4, "TxEtherStatsMulticastPkts" },
319 	{ 5, "TxEtherStatsPkts64Octets" },
320 	{ 6, "TxEtherStatsPkts65to127Octets" },
321 	{ 7, "TxEtherStatsPkts128to255Octets" },
322 	{ 8, "TxEtherStatsPkts256to511Octets" },
323 	{ 9, "TxEtherStatsPkts512to1023Octets" },
324 	{ 10, "TxEtherStatsPkts1024to1518Octets" },
325 	{ 11, "TxJumboFrames" }, /* non-standard counter */
326 	{ 12, "TxaPauseMACControlFramesTransmitted" },
327 	{ 13, "TxFIFODrops" }, /* non-standard counter */
328 	{ 14, "TxDrops" }, /* non-standard counter */
329 	{ 15, "TxEtherStatsCollisions" },
330 	{ 16, "TxEtherStatsCRCAlignErrors" },
331 	{ 17, "TxEtherStatsUndersizePkts" },
332 	{ 18, "TxEtherStatsOversizePkts" },
333 	{ 19, "TxEtherStatsFragments" },
334 	{ 20, "TxEtherStatsJabbers" },
335 	/* 21-24 are undefined */
336 	{ 25, "TxaFramesReceivedOK" },
337 	{ 26, "TxQoSClass0" }, /* non-standard counter */
338 	{ 27, "TxQoSClass1" }, /* non-standard counter */
339 	{ 28, "TxQoSClass2" }, /* non-standard counter */
340 	{ 29, "TxQoSClass3" }, /* non-standard counter */
341 };
342 
343 int vsc73xx_is_addr_valid(u8 block, u8 subblock)
344 {
345 	switch (block) {
346 	case VSC73XX_BLOCK_MAC:
347 		switch (subblock) {
348 		case 0 ... 4:
349 		case 6:
350 			return 1;
351 		}
352 		break;
353 
354 	case VSC73XX_BLOCK_ANALYZER:
355 	case VSC73XX_BLOCK_SYSTEM:
356 		switch (subblock) {
357 		case 0:
358 			return 1;
359 		}
360 		break;
361 
362 	case VSC73XX_BLOCK_MII:
363 	case VSC73XX_BLOCK_CAPTURE:
364 	case VSC73XX_BLOCK_ARBITER:
365 		switch (subblock) {
366 		case 0 ... 1:
367 			return 1;
368 		}
369 		break;
370 	}
371 
372 	return 0;
373 }
374 EXPORT_SYMBOL(vsc73xx_is_addr_valid);
375 
376 static int vsc73xx_read(struct vsc73xx *vsc, u8 block, u8 subblock, u8 reg,
377 			u32 *val)
378 {
379 	return vsc->ops->read(vsc, block, subblock, reg, val);
380 }
381 
382 static int vsc73xx_write(struct vsc73xx *vsc, u8 block, u8 subblock, u8 reg,
383 			 u32 val)
384 {
385 	return vsc->ops->write(vsc, block, subblock, reg, val);
386 }
387 
388 static int vsc73xx_update_bits(struct vsc73xx *vsc, u8 block, u8 subblock,
389 			       u8 reg, u32 mask, u32 val)
390 {
391 	u32 tmp, orig;
392 	int ret;
393 
394 	/* Same read-modify-write algorithm as e.g. regmap */
395 	ret = vsc73xx_read(vsc, block, subblock, reg, &orig);
396 	if (ret)
397 		return ret;
398 	tmp = orig & ~mask;
399 	tmp |= val & mask;
400 	return vsc73xx_write(vsc, block, subblock, reg, tmp);
401 }
402 
403 static int vsc73xx_detect(struct vsc73xx *vsc)
404 {
405 	bool icpu_si_boot_en;
406 	bool icpu_pi_en;
407 	u32 val;
408 	u32 rev;
409 	int ret;
410 	u32 id;
411 
412 	ret = vsc73xx_read(vsc, VSC73XX_BLOCK_SYSTEM, 0,
413 			   VSC73XX_ICPU_MBOX_VAL, &val);
414 	if (ret) {
415 		dev_err(vsc->dev, "unable to read mailbox (%d)\n", ret);
416 		return ret;
417 	}
418 
419 	if (val == 0xffffffff) {
420 		dev_info(vsc->dev, "chip seems dead.\n");
421 		return -EAGAIN;
422 	}
423 
424 	ret = vsc73xx_read(vsc, VSC73XX_BLOCK_SYSTEM, 0,
425 			   VSC73XX_CHIPID, &val);
426 	if (ret) {
427 		dev_err(vsc->dev, "unable to read chip id (%d)\n", ret);
428 		return ret;
429 	}
430 
431 	id = (val >> VSC73XX_CHIPID_ID_SHIFT) &
432 		VSC73XX_CHIPID_ID_MASK;
433 	switch (id) {
434 	case VSC73XX_CHIPID_ID_7385:
435 	case VSC73XX_CHIPID_ID_7388:
436 	case VSC73XX_CHIPID_ID_7395:
437 	case VSC73XX_CHIPID_ID_7398:
438 		break;
439 	default:
440 		dev_err(vsc->dev, "unsupported chip, id=%04x\n", id);
441 		return -ENODEV;
442 	}
443 
444 	vsc->chipid = id;
445 	rev = (val >> VSC73XX_CHIPID_REV_SHIFT) &
446 		VSC73XX_CHIPID_REV_MASK;
447 	dev_info(vsc->dev, "VSC%04X (rev: %d) switch found\n", id, rev);
448 
449 	ret = vsc73xx_read(vsc, VSC73XX_BLOCK_SYSTEM, 0,
450 			   VSC73XX_ICPU_CTRL, &val);
451 	if (ret) {
452 		dev_err(vsc->dev, "unable to read iCPU control\n");
453 		return ret;
454 	}
455 
456 	/* The iCPU can always be used but can boot in different ways.
457 	 * If it is initially disabled and has no external memory,
458 	 * we are in control and can do whatever we like, else we
459 	 * are probably in trouble (we need some way to communicate
460 	 * with the running firmware) so we bail out for now.
461 	 */
462 	icpu_pi_en = !!(val & VSC73XX_ICPU_CTRL_ICPU_PI_EN);
463 	icpu_si_boot_en = !!(val & VSC73XX_ICPU_CTRL_BOOT_EN);
464 	if (icpu_si_boot_en && icpu_pi_en) {
465 		dev_err(vsc->dev,
466 			"iCPU enabled boots from SI, has external memory\n");
467 		dev_err(vsc->dev, "no idea how to deal with this\n");
468 		return -ENODEV;
469 	}
470 	if (icpu_si_boot_en && !icpu_pi_en) {
471 		dev_err(vsc->dev,
472 			"iCPU enabled boots from PI/SI, no external memory\n");
473 		return -EAGAIN;
474 	}
475 	if (!icpu_si_boot_en && icpu_pi_en) {
476 		dev_err(vsc->dev,
477 			"iCPU enabled, boots from PI external memory\n");
478 		dev_err(vsc->dev, "no idea how to deal with this\n");
479 		return -ENODEV;
480 	}
481 	/* !icpu_si_boot_en && !cpu_pi_en */
482 	dev_info(vsc->dev, "iCPU disabled, no external memory\n");
483 
484 	return 0;
485 }
486 
487 static int vsc73xx_phy_read(struct dsa_switch *ds, int phy, int regnum)
488 {
489 	struct vsc73xx *vsc = ds->priv;
490 	u32 cmd;
491 	u32 val;
492 	int ret;
493 
494 	/* Setting bit 26 means "read" */
495 	cmd = BIT(26) | (phy << 21) | (regnum << 16);
496 	ret = vsc73xx_write(vsc, VSC73XX_BLOCK_MII, 0, 1, cmd);
497 	if (ret)
498 		return ret;
499 	msleep(2);
500 	ret = vsc73xx_read(vsc, VSC73XX_BLOCK_MII, 0, 2, &val);
501 	if (ret)
502 		return ret;
503 	if (val & BIT(16)) {
504 		dev_err(vsc->dev, "reading reg %02x from phy%d failed\n",
505 			regnum, phy);
506 		return -EIO;
507 	}
508 	val &= 0xFFFFU;
509 
510 	dev_dbg(vsc->dev, "read reg %02x from phy%d = %04x\n",
511 		regnum, phy, val);
512 
513 	return val;
514 }
515 
516 static int vsc73xx_phy_write(struct dsa_switch *ds, int phy, int regnum,
517 			     u16 val)
518 {
519 	struct vsc73xx *vsc = ds->priv;
520 	u32 cmd;
521 	int ret;
522 
523 	/* It was found through tedious experiments that this router
524 	 * chip really hates to have it's PHYs reset. They
525 	 * never recover if that happens: autonegotiation stops
526 	 * working after a reset. Just filter out this command.
527 	 * (Resetting the whole chip is OK.)
528 	 */
529 	if (regnum == 0 && (val & BIT(15))) {
530 		dev_info(vsc->dev, "reset PHY - disallowed\n");
531 		return 0;
532 	}
533 
534 	cmd = (phy << 21) | (regnum << 16);
535 	ret = vsc73xx_write(vsc, VSC73XX_BLOCK_MII, 0, 1, cmd);
536 	if (ret)
537 		return ret;
538 
539 	dev_dbg(vsc->dev, "write %04x to reg %02x in phy%d\n",
540 		val, regnum, phy);
541 	return 0;
542 }
543 
544 static enum dsa_tag_protocol vsc73xx_get_tag_protocol(struct dsa_switch *ds,
545 						      int port,
546 						      enum dsa_tag_protocol mp)
547 {
548 	/* The switch internally uses a 8 byte header with length,
549 	 * source port, tag, LPA and priority. This is supposedly
550 	 * only accessible when operating the switch using the internal
551 	 * CPU or with an external CPU mapping the device in, but not
552 	 * when operating the switch over SPI and putting frames in/out
553 	 * on port 6 (the CPU port). So far we must assume that we
554 	 * cannot access the tag. (See "Internal frame header" section
555 	 * 3.9.1 in the manual.)
556 	 */
557 	return DSA_TAG_PROTO_NONE;
558 }
559 
560 static int vsc73xx_setup(struct dsa_switch *ds)
561 {
562 	struct vsc73xx *vsc = ds->priv;
563 	int i;
564 
565 	dev_info(vsc->dev, "set up the switch\n");
566 
567 	/* Issue RESET */
568 	vsc73xx_write(vsc, VSC73XX_BLOCK_SYSTEM, 0, VSC73XX_GLORESET,
569 		      VSC73XX_GLORESET_MASTER_RESET);
570 	usleep_range(125, 200);
571 
572 	/* Initialize memory, initialize RAM bank 0..15 except 6 and 7
573 	 * This sequence appears in the
574 	 * VSC7385 SparX-G5 datasheet section 6.6.1
575 	 * VSC7395 SparX-G5e datasheet section 6.6.1
576 	 * "initialization sequence".
577 	 * No explanation is given to the 0x1010400 magic number.
578 	 */
579 	for (i = 0; i <= 15; i++) {
580 		if (i != 6 && i != 7) {
581 			vsc73xx_write(vsc, VSC73XX_BLOCK_MEMINIT,
582 				      2,
583 				      0, 0x1010400 + i);
584 			mdelay(1);
585 		}
586 	}
587 	mdelay(30);
588 
589 	/* Clear MAC table */
590 	vsc73xx_write(vsc, VSC73XX_BLOCK_ANALYZER, 0,
591 		      VSC73XX_MACACCESS,
592 		      VSC73XX_MACACCESS_CMD_CLEAR_TABLE);
593 
594 	/* Clear VLAN table */
595 	vsc73xx_write(vsc, VSC73XX_BLOCK_ANALYZER, 0,
596 		      VSC73XX_VLANACCESS,
597 		      VSC73XX_VLANACCESS_VLAN_TBL_CMD_CLEAR_TABLE);
598 
599 	msleep(40);
600 
601 	/* Use 20KiB buffers on all ports on VSC7395
602 	 * The VSC7385 has 16KiB buffers and that is the
603 	 * default if we don't set this up explicitly.
604 	 * Port "31" is "all ports".
605 	 */
606 	if (IS_739X(vsc))
607 		vsc73xx_write(vsc, VSC73XX_BLOCK_MAC, 0x1f,
608 			      VSC73XX_Q_MISC_CONF,
609 			      VSC73XX_Q_MISC_CONF_EXTENT_MEM);
610 
611 	/* Put all ports into reset until enabled */
612 	for (i = 0; i < 7; i++) {
613 		if (i == 5)
614 			continue;
615 		vsc73xx_write(vsc, VSC73XX_BLOCK_MAC, 4,
616 			      VSC73XX_MAC_CFG, VSC73XX_MAC_CFG_RESET);
617 	}
618 
619 	/* MII delay, set both GTX and RX delay to 2 ns */
620 	vsc73xx_write(vsc, VSC73XX_BLOCK_SYSTEM, 0, VSC73XX_GMIIDELAY,
621 		      VSC73XX_GMIIDELAY_GMII0_GTXDELAY_2_0_NS |
622 		      VSC73XX_GMIIDELAY_GMII0_RXDELAY_2_0_NS);
623 	/* Enable reception of frames on all ports */
624 	vsc73xx_write(vsc, VSC73XX_BLOCK_ANALYZER, 0, VSC73XX_RECVMASK,
625 		      0x5f);
626 	/* IP multicast flood mask (table 144) */
627 	vsc73xx_write(vsc, VSC73XX_BLOCK_ANALYZER, 0, VSC73XX_IFLODMSK,
628 		      0xff);
629 
630 	mdelay(50);
631 
632 	/* Release reset from the internal PHYs */
633 	vsc73xx_write(vsc, VSC73XX_BLOCK_SYSTEM, 0, VSC73XX_GLORESET,
634 		      VSC73XX_GLORESET_PHY_RESET);
635 
636 	udelay(4);
637 
638 	return 0;
639 }
640 
641 static void vsc73xx_init_port(struct vsc73xx *vsc, int port)
642 {
643 	u32 val;
644 
645 	/* MAC configure, first reset the port and then write defaults */
646 	vsc73xx_write(vsc, VSC73XX_BLOCK_MAC,
647 		      port,
648 		      VSC73XX_MAC_CFG,
649 		      VSC73XX_MAC_CFG_RESET);
650 
651 	/* Take up the port in 1Gbit mode by default, this will be
652 	 * augmented after auto-negotiation on the PHY-facing
653 	 * ports.
654 	 */
655 	if (port == CPU_PORT)
656 		val = VSC73XX_MAC_CFG_1000M_F_RGMII;
657 	else
658 		val = VSC73XX_MAC_CFG_1000M_F_PHY;
659 
660 	vsc73xx_write(vsc, VSC73XX_BLOCK_MAC,
661 		      port,
662 		      VSC73XX_MAC_CFG,
663 		      val |
664 		      VSC73XX_MAC_CFG_TX_EN |
665 		      VSC73XX_MAC_CFG_RX_EN);
666 
667 	/* Max length, we can do up to 9.6 KiB, so allow that.
668 	 * According to application not "VSC7398 Jumbo Frames" setting
669 	 * up the MTU to 9.6 KB does not affect the performance on standard
670 	 * frames, so just enable it. It is clear from the application note
671 	 * that "9.6 kilobytes" == 9600 bytes.
672 	 */
673 	vsc73xx_write(vsc, VSC73XX_BLOCK_MAC,
674 		      port,
675 		      VSC73XX_MAXLEN, 9600);
676 
677 	/* Flow control for the CPU port:
678 	 * Use a zero delay pause frame when pause condition is left
679 	 * Obey pause control frames
680 	 */
681 	vsc73xx_write(vsc, VSC73XX_BLOCK_MAC,
682 		      port,
683 		      VSC73XX_FCCONF,
684 		      VSC73XX_FCCONF_ZERO_PAUSE_EN |
685 		      VSC73XX_FCCONF_FLOW_CTRL_OBEY);
686 
687 	/* Issue pause control frames on PHY facing ports.
688 	 * Allow early initiation of MAC transmission if the amount
689 	 * of egress data is below 512 bytes on CPU port.
690 	 * FIXME: enable 20KiB buffers?
691 	 */
692 	if (port == CPU_PORT)
693 		val = VSC73XX_Q_MISC_CONF_EARLY_TX_512;
694 	else
695 		val = VSC73XX_Q_MISC_CONF_MAC_PAUSE_MODE;
696 	val |= VSC73XX_Q_MISC_CONF_EXTENT_MEM;
697 	vsc73xx_write(vsc, VSC73XX_BLOCK_MAC,
698 		      port,
699 		      VSC73XX_Q_MISC_CONF,
700 		      val);
701 
702 	/* Flow control MAC: a MAC address used in flow control frames */
703 	val = (vsc->addr[5] << 16) | (vsc->addr[4] << 8) | (vsc->addr[3]);
704 	vsc73xx_write(vsc, VSC73XX_BLOCK_MAC,
705 		      port,
706 		      VSC73XX_FCMACHI,
707 		      val);
708 	val = (vsc->addr[2] << 16) | (vsc->addr[1] << 8) | (vsc->addr[0]);
709 	vsc73xx_write(vsc, VSC73XX_BLOCK_MAC,
710 		      port,
711 		      VSC73XX_FCMACLO,
712 		      val);
713 
714 	/* Tell the categorizer to forward pause frames, not control
715 	 * frame. Do not drop anything.
716 	 */
717 	vsc73xx_write(vsc, VSC73XX_BLOCK_MAC,
718 		      port,
719 		      VSC73XX_CAT_DROP,
720 		      VSC73XX_CAT_DROP_FWD_PAUSE_ENA);
721 
722 	/* Clear all counters */
723 	vsc73xx_write(vsc, VSC73XX_BLOCK_MAC,
724 		      port, VSC73XX_C_RX0, 0);
725 }
726 
727 static void vsc73xx_adjust_enable_port(struct vsc73xx *vsc,
728 				       int port, struct phy_device *phydev,
729 				       u32 initval)
730 {
731 	u32 val = initval;
732 	u8 seed;
733 
734 	/* Reset this port FIXME: break out subroutine */
735 	val |= VSC73XX_MAC_CFG_RESET;
736 	vsc73xx_write(vsc, VSC73XX_BLOCK_MAC, port, VSC73XX_MAC_CFG, val);
737 
738 	/* Seed the port randomness with randomness */
739 	get_random_bytes(&seed, 1);
740 	val |= seed << VSC73XX_MAC_CFG_SEED_OFFSET;
741 	val |= VSC73XX_MAC_CFG_SEED_LOAD;
742 	val |= VSC73XX_MAC_CFG_WEXC_DIS;
743 	vsc73xx_write(vsc, VSC73XX_BLOCK_MAC, port, VSC73XX_MAC_CFG, val);
744 
745 	/* Flow control for the PHY facing ports:
746 	 * Use a zero delay pause frame when pause condition is left
747 	 * Obey pause control frames
748 	 * When generating pause frames, use 0xff as pause value
749 	 */
750 	vsc73xx_write(vsc, VSC73XX_BLOCK_MAC, port, VSC73XX_FCCONF,
751 		      VSC73XX_FCCONF_ZERO_PAUSE_EN |
752 		      VSC73XX_FCCONF_FLOW_CTRL_OBEY |
753 		      0xff);
754 
755 	/* Disallow backward dropping of frames from this port */
756 	vsc73xx_update_bits(vsc, VSC73XX_BLOCK_ARBITER, 0,
757 			    VSC73XX_SBACKWDROP, BIT(port), 0);
758 
759 	/* Enable TX, RX, deassert reset, stop loading seed */
760 	vsc73xx_update_bits(vsc, VSC73XX_BLOCK_MAC, port,
761 			    VSC73XX_MAC_CFG,
762 			    VSC73XX_MAC_CFG_RESET | VSC73XX_MAC_CFG_SEED_LOAD |
763 			    VSC73XX_MAC_CFG_TX_EN | VSC73XX_MAC_CFG_RX_EN,
764 			    VSC73XX_MAC_CFG_TX_EN | VSC73XX_MAC_CFG_RX_EN);
765 }
766 
767 static void vsc73xx_adjust_link(struct dsa_switch *ds, int port,
768 				struct phy_device *phydev)
769 {
770 	struct vsc73xx *vsc = ds->priv;
771 	u32 val;
772 
773 	/* Special handling of the CPU-facing port */
774 	if (port == CPU_PORT) {
775 		/* Other ports are already initialized but not this one */
776 		vsc73xx_init_port(vsc, CPU_PORT);
777 		/* Select the external port for this interface (EXT_PORT)
778 		 * Enable the GMII GTX external clock
779 		 * Use double data rate (DDR mode)
780 		 */
781 		vsc73xx_write(vsc, VSC73XX_BLOCK_MAC,
782 			      CPU_PORT,
783 			      VSC73XX_ADVPORTM,
784 			      VSC73XX_ADVPORTM_EXT_PORT |
785 			      VSC73XX_ADVPORTM_ENA_GTX |
786 			      VSC73XX_ADVPORTM_DDR_MODE);
787 	}
788 
789 	/* This is the MAC confiuration that always need to happen
790 	 * after a PHY or the CPU port comes up or down.
791 	 */
792 	if (!phydev->link) {
793 		int maxloop = 10;
794 
795 		dev_dbg(vsc->dev, "port %d: went down\n",
796 			port);
797 
798 		/* Disable RX on this port */
799 		vsc73xx_update_bits(vsc, VSC73XX_BLOCK_MAC, port,
800 				    VSC73XX_MAC_CFG,
801 				    VSC73XX_MAC_CFG_RX_EN, 0);
802 
803 		/* Discard packets */
804 		vsc73xx_update_bits(vsc, VSC73XX_BLOCK_ARBITER, 0,
805 				    VSC73XX_ARBDISC, BIT(port), BIT(port));
806 
807 		/* Wait until queue is empty */
808 		vsc73xx_read(vsc, VSC73XX_BLOCK_ARBITER, 0,
809 			     VSC73XX_ARBEMPTY, &val);
810 		while (!(val & BIT(port))) {
811 			msleep(1);
812 			vsc73xx_read(vsc, VSC73XX_BLOCK_ARBITER, 0,
813 				     VSC73XX_ARBEMPTY, &val);
814 			if (--maxloop == 0) {
815 				dev_err(vsc->dev,
816 					"timeout waiting for block arbiter\n");
817 				/* Continue anyway */
818 				break;
819 			}
820 		}
821 
822 		/* Put this port into reset */
823 		vsc73xx_write(vsc, VSC73XX_BLOCK_MAC, port, VSC73XX_MAC_CFG,
824 			      VSC73XX_MAC_CFG_RESET);
825 
826 		/* Accept packets again */
827 		vsc73xx_update_bits(vsc, VSC73XX_BLOCK_ARBITER, 0,
828 				    VSC73XX_ARBDISC, BIT(port), 0);
829 
830 		/* Allow backward dropping of frames from this port */
831 		vsc73xx_update_bits(vsc, VSC73XX_BLOCK_ARBITER, 0,
832 				    VSC73XX_SBACKWDROP, BIT(port), BIT(port));
833 
834 		/* Receive mask (disable forwarding) */
835 		vsc73xx_update_bits(vsc, VSC73XX_BLOCK_ANALYZER, 0,
836 				    VSC73XX_RECVMASK, BIT(port), 0);
837 
838 		return;
839 	}
840 
841 	/* Figure out what speed was negotiated */
842 	if (phydev->speed == SPEED_1000) {
843 		dev_dbg(vsc->dev, "port %d: 1000 Mbit mode full duplex\n",
844 			port);
845 
846 		/* Set up default for internal port or external RGMII */
847 		if (phydev->interface == PHY_INTERFACE_MODE_RGMII)
848 			val = VSC73XX_MAC_CFG_1000M_F_RGMII;
849 		else
850 			val = VSC73XX_MAC_CFG_1000M_F_PHY;
851 		vsc73xx_adjust_enable_port(vsc, port, phydev, val);
852 	} else if (phydev->speed == SPEED_100) {
853 		if (phydev->duplex == DUPLEX_FULL) {
854 			val = VSC73XX_MAC_CFG_100_10M_F_PHY;
855 			dev_dbg(vsc->dev,
856 				"port %d: 100 Mbit full duplex mode\n",
857 				port);
858 		} else {
859 			val = VSC73XX_MAC_CFG_100_10M_H_PHY;
860 			dev_dbg(vsc->dev,
861 				"port %d: 100 Mbit half duplex mode\n",
862 				port);
863 		}
864 		vsc73xx_adjust_enable_port(vsc, port, phydev, val);
865 	} else if (phydev->speed == SPEED_10) {
866 		if (phydev->duplex == DUPLEX_FULL) {
867 			val = VSC73XX_MAC_CFG_100_10M_F_PHY;
868 			dev_dbg(vsc->dev,
869 				"port %d: 10 Mbit full duplex mode\n",
870 				port);
871 		} else {
872 			val = VSC73XX_MAC_CFG_100_10M_H_PHY;
873 			dev_dbg(vsc->dev,
874 				"port %d: 10 Mbit half duplex mode\n",
875 				port);
876 		}
877 		vsc73xx_adjust_enable_port(vsc, port, phydev, val);
878 	} else {
879 		dev_err(vsc->dev,
880 			"could not adjust link: unknown speed\n");
881 	}
882 
883 	/* Enable port (forwarding) in the receieve mask */
884 	vsc73xx_update_bits(vsc, VSC73XX_BLOCK_ANALYZER, 0,
885 			    VSC73XX_RECVMASK, BIT(port), BIT(port));
886 }
887 
888 static int vsc73xx_port_enable(struct dsa_switch *ds, int port,
889 			       struct phy_device *phy)
890 {
891 	struct vsc73xx *vsc = ds->priv;
892 
893 	dev_info(vsc->dev, "enable port %d\n", port);
894 	vsc73xx_init_port(vsc, port);
895 
896 	return 0;
897 }
898 
899 static void vsc73xx_port_disable(struct dsa_switch *ds, int port)
900 {
901 	struct vsc73xx *vsc = ds->priv;
902 
903 	/* Just put the port into reset */
904 	vsc73xx_write(vsc, VSC73XX_BLOCK_MAC, port,
905 		      VSC73XX_MAC_CFG, VSC73XX_MAC_CFG_RESET);
906 }
907 
908 static const struct vsc73xx_counter *
909 vsc73xx_find_counter(struct vsc73xx *vsc,
910 		     u8 counter,
911 		     bool tx)
912 {
913 	const struct vsc73xx_counter *cnts;
914 	int num_cnts;
915 	int i;
916 
917 	if (tx) {
918 		cnts = vsc73xx_tx_counters;
919 		num_cnts = ARRAY_SIZE(vsc73xx_tx_counters);
920 	} else {
921 		cnts = vsc73xx_rx_counters;
922 		num_cnts = ARRAY_SIZE(vsc73xx_rx_counters);
923 	}
924 
925 	for (i = 0; i < num_cnts; i++) {
926 		const struct vsc73xx_counter *cnt;
927 
928 		cnt = &cnts[i];
929 		if (cnt->counter == counter)
930 			return cnt;
931 	}
932 
933 	return NULL;
934 }
935 
936 static void vsc73xx_get_strings(struct dsa_switch *ds, int port, u32 stringset,
937 				uint8_t *data)
938 {
939 	const struct vsc73xx_counter *cnt;
940 	struct vsc73xx *vsc = ds->priv;
941 	u8 indices[6];
942 	int i, j;
943 	u32 val;
944 	int ret;
945 
946 	if (stringset != ETH_SS_STATS)
947 		return;
948 
949 	ret = vsc73xx_read(vsc, VSC73XX_BLOCK_MAC, port,
950 			   VSC73XX_C_CFG, &val);
951 	if (ret)
952 		return;
953 
954 	indices[0] = (val & 0x1f); /* RX counter 0 */
955 	indices[1] = ((val >> 5) & 0x1f); /* RX counter 1 */
956 	indices[2] = ((val >> 10) & 0x1f); /* RX counter 2 */
957 	indices[3] = ((val >> 16) & 0x1f); /* TX counter 0 */
958 	indices[4] = ((val >> 21) & 0x1f); /* TX counter 1 */
959 	indices[5] = ((val >> 26) & 0x1f); /* TX counter 2 */
960 
961 	/* The first counters is the RX octets */
962 	j = 0;
963 	strncpy(data + j * ETH_GSTRING_LEN,
964 		"RxEtherStatsOctets", ETH_GSTRING_LEN);
965 	j++;
966 
967 	/* Each port supports recording 3 RX counters and 3 TX counters,
968 	 * figure out what counters we use in this set-up and return the
969 	 * names of them. The hardware default counters will be number of
970 	 * packets on RX/TX, combined broadcast+multicast packets RX/TX and
971 	 * total error packets RX/TX.
972 	 */
973 	for (i = 0; i < 3; i++) {
974 		cnt = vsc73xx_find_counter(vsc, indices[i], false);
975 		if (cnt)
976 			strncpy(data + j * ETH_GSTRING_LEN,
977 				cnt->name, ETH_GSTRING_LEN);
978 		j++;
979 	}
980 
981 	/* TX stats begins with the number of TX octets */
982 	strncpy(data + j * ETH_GSTRING_LEN,
983 		"TxEtherStatsOctets", ETH_GSTRING_LEN);
984 	j++;
985 
986 	for (i = 3; i < 6; i++) {
987 		cnt = vsc73xx_find_counter(vsc, indices[i], true);
988 		if (cnt)
989 			strncpy(data + j * ETH_GSTRING_LEN,
990 				cnt->name, ETH_GSTRING_LEN);
991 		j++;
992 	}
993 }
994 
995 static int vsc73xx_get_sset_count(struct dsa_switch *ds, int port, int sset)
996 {
997 	/* We only support SS_STATS */
998 	if (sset != ETH_SS_STATS)
999 		return 0;
1000 	/* RX and TX packets, then 3 RX counters, 3 TX counters */
1001 	return 8;
1002 }
1003 
1004 static void vsc73xx_get_ethtool_stats(struct dsa_switch *ds, int port,
1005 				      uint64_t *data)
1006 {
1007 	struct vsc73xx *vsc = ds->priv;
1008 	u8 regs[] = {
1009 		VSC73XX_RXOCT,
1010 		VSC73XX_C_RX0,
1011 		VSC73XX_C_RX1,
1012 		VSC73XX_C_RX2,
1013 		VSC73XX_TXOCT,
1014 		VSC73XX_C_TX0,
1015 		VSC73XX_C_TX1,
1016 		VSC73XX_C_TX2,
1017 	};
1018 	u32 val;
1019 	int ret;
1020 	int i;
1021 
1022 	for (i = 0; i < ARRAY_SIZE(regs); i++) {
1023 		ret = vsc73xx_read(vsc, VSC73XX_BLOCK_MAC, port,
1024 				   regs[i], &val);
1025 		if (ret) {
1026 			dev_err(vsc->dev, "error reading counter %d\n", i);
1027 			return;
1028 		}
1029 		data[i] = val;
1030 	}
1031 }
1032 
1033 static const struct dsa_switch_ops vsc73xx_ds_ops = {
1034 	.get_tag_protocol = vsc73xx_get_tag_protocol,
1035 	.setup = vsc73xx_setup,
1036 	.phy_read = vsc73xx_phy_read,
1037 	.phy_write = vsc73xx_phy_write,
1038 	.adjust_link = vsc73xx_adjust_link,
1039 	.get_strings = vsc73xx_get_strings,
1040 	.get_ethtool_stats = vsc73xx_get_ethtool_stats,
1041 	.get_sset_count = vsc73xx_get_sset_count,
1042 	.port_enable = vsc73xx_port_enable,
1043 	.port_disable = vsc73xx_port_disable,
1044 };
1045 
1046 static int vsc73xx_gpio_get(struct gpio_chip *chip, unsigned int offset)
1047 {
1048 	struct vsc73xx *vsc = gpiochip_get_data(chip);
1049 	u32 val;
1050 	int ret;
1051 
1052 	ret = vsc73xx_read(vsc, VSC73XX_BLOCK_SYSTEM, 0,
1053 			   VSC73XX_GPIO, &val);
1054 	if (ret)
1055 		return ret;
1056 
1057 	return !!(val & BIT(offset));
1058 }
1059 
1060 static void vsc73xx_gpio_set(struct gpio_chip *chip, unsigned int offset,
1061 			     int val)
1062 {
1063 	struct vsc73xx *vsc = gpiochip_get_data(chip);
1064 	u32 tmp = val ? BIT(offset) : 0;
1065 
1066 	vsc73xx_update_bits(vsc, VSC73XX_BLOCK_SYSTEM, 0,
1067 			    VSC73XX_GPIO, BIT(offset), tmp);
1068 }
1069 
1070 static int vsc73xx_gpio_direction_output(struct gpio_chip *chip,
1071 					 unsigned int offset, int val)
1072 {
1073 	struct vsc73xx *vsc = gpiochip_get_data(chip);
1074 	u32 tmp = val ? BIT(offset) : 0;
1075 
1076 	return vsc73xx_update_bits(vsc, VSC73XX_BLOCK_SYSTEM, 0,
1077 				   VSC73XX_GPIO, BIT(offset + 4) | BIT(offset),
1078 				   BIT(offset + 4) | tmp);
1079 }
1080 
1081 static int vsc73xx_gpio_direction_input(struct gpio_chip *chip,
1082 					unsigned int offset)
1083 {
1084 	struct vsc73xx *vsc = gpiochip_get_data(chip);
1085 
1086 	return  vsc73xx_update_bits(vsc, VSC73XX_BLOCK_SYSTEM, 0,
1087 				    VSC73XX_GPIO, BIT(offset + 4),
1088 				    0);
1089 }
1090 
1091 static int vsc73xx_gpio_get_direction(struct gpio_chip *chip,
1092 				      unsigned int offset)
1093 {
1094 	struct vsc73xx *vsc = gpiochip_get_data(chip);
1095 	u32 val;
1096 	int ret;
1097 
1098 	ret = vsc73xx_read(vsc, VSC73XX_BLOCK_SYSTEM, 0,
1099 			   VSC73XX_GPIO, &val);
1100 	if (ret)
1101 		return ret;
1102 
1103 	return !(val & BIT(offset + 4));
1104 }
1105 
1106 static int vsc73xx_gpio_probe(struct vsc73xx *vsc)
1107 {
1108 	int ret;
1109 
1110 	vsc->gc.label = devm_kasprintf(vsc->dev, GFP_KERNEL, "VSC%04x",
1111 				       vsc->chipid);
1112 	vsc->gc.ngpio = 4;
1113 	vsc->gc.owner = THIS_MODULE;
1114 	vsc->gc.parent = vsc->dev;
1115 #if IS_ENABLED(CONFIG_OF_GPIO)
1116 	vsc->gc.of_node = vsc->dev->of_node;
1117 #endif
1118 	vsc->gc.base = -1;
1119 	vsc->gc.get = vsc73xx_gpio_get;
1120 	vsc->gc.set = vsc73xx_gpio_set;
1121 	vsc->gc.direction_input = vsc73xx_gpio_direction_input;
1122 	vsc->gc.direction_output = vsc73xx_gpio_direction_output;
1123 	vsc->gc.get_direction = vsc73xx_gpio_get_direction;
1124 	vsc->gc.can_sleep = true;
1125 	ret = devm_gpiochip_add_data(vsc->dev, &vsc->gc, vsc);
1126 	if (ret) {
1127 		dev_err(vsc->dev, "unable to register GPIO chip\n");
1128 		return ret;
1129 	}
1130 	return 0;
1131 }
1132 
1133 int vsc73xx_probe(struct vsc73xx *vsc)
1134 {
1135 	struct device *dev = vsc->dev;
1136 	int ret;
1137 
1138 	/* Release reset, if any */
1139 	vsc->reset = devm_gpiod_get_optional(dev, "reset", GPIOD_OUT_LOW);
1140 	if (IS_ERR(vsc->reset)) {
1141 		dev_err(dev, "failed to get RESET GPIO\n");
1142 		return PTR_ERR(vsc->reset);
1143 	}
1144 	if (vsc->reset)
1145 		/* Wait 20ms according to datasheet table 245 */
1146 		msleep(20);
1147 
1148 	ret = vsc73xx_detect(vsc);
1149 	if (ret == -EAGAIN) {
1150 		dev_err(vsc->dev,
1151 			"Chip seems to be out of control. Assert reset and try again.\n");
1152 		gpiod_set_value_cansleep(vsc->reset, 1);
1153 		/* Reset pulse should be 20ns minimum, according to datasheet
1154 		 * table 245, so 10us should be fine
1155 		 */
1156 		usleep_range(10, 100);
1157 		gpiod_set_value_cansleep(vsc->reset, 0);
1158 		/* Wait 20ms according to datasheet table 245 */
1159 		msleep(20);
1160 		ret = vsc73xx_detect(vsc);
1161 	}
1162 	if (ret) {
1163 		dev_err(dev, "no chip found (%d)\n", ret);
1164 		return -ENODEV;
1165 	}
1166 
1167 	eth_random_addr(vsc->addr);
1168 	dev_info(vsc->dev,
1169 		 "MAC for control frames: %02X:%02X:%02X:%02X:%02X:%02X\n",
1170 		 vsc->addr[0], vsc->addr[1], vsc->addr[2],
1171 		 vsc->addr[3], vsc->addr[4], vsc->addr[5]);
1172 
1173 	/* The VSC7395 switch chips have 5+1 ports which means 5
1174 	 * ordinary ports and a sixth CPU port facing the processor
1175 	 * with an RGMII interface. These ports are numbered 0..4
1176 	 * and 6, so they leave a "hole" in the port map for port 5,
1177 	 * which is invalid.
1178 	 *
1179 	 * The VSC7398 has 8 ports, port 7 is again the CPU port.
1180 	 *
1181 	 * We allocate 8 ports and avoid access to the nonexistant
1182 	 * ports.
1183 	 */
1184 	vsc->ds = devm_kzalloc(dev, sizeof(*vsc->ds), GFP_KERNEL);
1185 	if (!vsc->ds)
1186 		return -ENOMEM;
1187 
1188 	vsc->ds->dev = dev;
1189 	vsc->ds->num_ports = 8;
1190 	vsc->ds->priv = vsc;
1191 
1192 	vsc->ds->ops = &vsc73xx_ds_ops;
1193 	ret = dsa_register_switch(vsc->ds);
1194 	if (ret) {
1195 		dev_err(dev, "unable to register switch (%d)\n", ret);
1196 		return ret;
1197 	}
1198 
1199 	ret = vsc73xx_gpio_probe(vsc);
1200 	if (ret) {
1201 		dsa_unregister_switch(vsc->ds);
1202 		return ret;
1203 	}
1204 
1205 	return 0;
1206 }
1207 EXPORT_SYMBOL(vsc73xx_probe);
1208 
1209 int vsc73xx_remove(struct vsc73xx *vsc)
1210 {
1211 	dsa_unregister_switch(vsc->ds);
1212 	gpiod_set_value(vsc->reset, 1);
1213 
1214 	return 0;
1215 }
1216 EXPORT_SYMBOL(vsc73xx_remove);
1217 
1218 MODULE_AUTHOR("Linus Walleij <linus.walleij@linaro.org>");
1219 MODULE_DESCRIPTION("Vitesse VSC7385/7388/7395/7398 driver");
1220 MODULE_LICENSE("GPL v2");
1221