1 // SPDX-License-Identifier: BSD-3-Clause
2 /* Copyright 2016-2018 NXP
3  * Copyright (c) 2018, Sensor-Technik Wiedemann GmbH
4  * Copyright (c) 2018-2019, Vladimir Oltean <olteanv@gmail.com>
5  */
6 #include <linux/spi/spi.h>
7 #include <linux/packing.h>
8 #include "sja1105.h"
9 
10 struct sja1105_chunk {
11 	u8	*buf;
12 	size_t	len;
13 	u64	reg_addr;
14 };
15 
16 static void
17 sja1105_spi_message_pack(void *buf, const struct sja1105_spi_message *msg)
18 {
19 	const int size = SJA1105_SIZE_SPI_MSG_HEADER;
20 
21 	memset(buf, 0, size);
22 
23 	sja1105_pack(buf, &msg->access,     31, 31, size);
24 	sja1105_pack(buf, &msg->read_count, 30, 25, size);
25 	sja1105_pack(buf, &msg->address,    24,  4, size);
26 }
27 
28 /* If @rw is:
29  * - SPI_WRITE: creates and sends an SPI write message at absolute
30  *		address reg_addr, taking @len bytes from *buf
31  * - SPI_READ:  creates and sends an SPI read message from absolute
32  *		address reg_addr, writing @len bytes into *buf
33  */
34 static int sja1105_xfer(const struct sja1105_private *priv,
35 			sja1105_spi_rw_mode_t rw, u64 reg_addr, u8 *buf,
36 			size_t len, struct ptp_system_timestamp *ptp_sts)
37 {
38 	u8 hdr_buf[SJA1105_SIZE_SPI_MSG_HEADER] = {0};
39 	struct spi_device *spi = priv->spidev;
40 	struct spi_transfer xfers[2] = {0};
41 	struct spi_transfer *chunk_xfer;
42 	struct spi_transfer *hdr_xfer;
43 	struct sja1105_chunk chunk;
44 	int num_chunks;
45 	int rc, i = 0;
46 
47 	num_chunks = DIV_ROUND_UP(len, priv->max_xfer_len);
48 
49 	chunk.reg_addr = reg_addr;
50 	chunk.buf = buf;
51 	chunk.len = min_t(size_t, len, priv->max_xfer_len);
52 
53 	hdr_xfer = &xfers[0];
54 	chunk_xfer = &xfers[1];
55 
56 	for (i = 0; i < num_chunks; i++) {
57 		struct spi_transfer *ptp_sts_xfer;
58 		struct sja1105_spi_message msg;
59 
60 		/* Populate the transfer's header buffer */
61 		msg.address = chunk.reg_addr;
62 		msg.access = rw;
63 		if (rw == SPI_READ)
64 			msg.read_count = chunk.len / 4;
65 		else
66 			/* Ignored */
67 			msg.read_count = 0;
68 		sja1105_spi_message_pack(hdr_buf, &msg);
69 		hdr_xfer->tx_buf = hdr_buf;
70 		hdr_xfer->len = SJA1105_SIZE_SPI_MSG_HEADER;
71 
72 		/* Populate the transfer's data buffer */
73 		if (rw == SPI_READ)
74 			chunk_xfer->rx_buf = chunk.buf;
75 		else
76 			chunk_xfer->tx_buf = chunk.buf;
77 		chunk_xfer->len = chunk.len;
78 
79 		/* Request timestamping for the transfer. Instead of letting
80 		 * callers specify which byte they want to timestamp, we can
81 		 * make certain assumptions:
82 		 * - A read operation will request a software timestamp when
83 		 *   what's being read is the PTP time. That is snapshotted by
84 		 *   the switch hardware at the end of the command portion
85 		 *   (hdr_xfer).
86 		 * - A write operation will request a software timestamp on
87 		 *   actions that modify the PTP time. Taking clock stepping as
88 		 *   an example, the switch writes the PTP time at the end of
89 		 *   the data portion (chunk_xfer).
90 		 */
91 		if (rw == SPI_READ)
92 			ptp_sts_xfer = hdr_xfer;
93 		else
94 			ptp_sts_xfer = chunk_xfer;
95 		ptp_sts_xfer->ptp_sts_word_pre = ptp_sts_xfer->len - 1;
96 		ptp_sts_xfer->ptp_sts_word_post = ptp_sts_xfer->len - 1;
97 		ptp_sts_xfer->ptp_sts = ptp_sts;
98 
99 		/* Calculate next chunk */
100 		chunk.buf += chunk.len;
101 		chunk.reg_addr += chunk.len / 4;
102 		chunk.len = min_t(size_t, (ptrdiff_t)(buf + len - chunk.buf),
103 				  priv->max_xfer_len);
104 
105 		rc = spi_sync_transfer(spi, xfers, 2);
106 		if (rc < 0) {
107 			dev_err(&spi->dev, "SPI transfer failed: %d\n", rc);
108 			return rc;
109 		}
110 	}
111 
112 	return 0;
113 }
114 
115 int sja1105_xfer_buf(const struct sja1105_private *priv,
116 		     sja1105_spi_rw_mode_t rw, u64 reg_addr,
117 		     u8 *buf, size_t len)
118 {
119 	return sja1105_xfer(priv, rw, reg_addr, buf, len, NULL);
120 }
121 
122 /* If @rw is:
123  * - SPI_WRITE: creates and sends an SPI write message at absolute
124  *		address reg_addr
125  * - SPI_READ:  creates and sends an SPI read message from absolute
126  *		address reg_addr
127  *
128  * The u64 *value is unpacked, meaning that it's stored in the native
129  * CPU endianness and directly usable by software running on the core.
130  */
131 int sja1105_xfer_u64(const struct sja1105_private *priv,
132 		     sja1105_spi_rw_mode_t rw, u64 reg_addr, u64 *value,
133 		     struct ptp_system_timestamp *ptp_sts)
134 {
135 	u8 packed_buf[8];
136 	int rc;
137 
138 	if (rw == SPI_WRITE)
139 		sja1105_pack(packed_buf, value, 63, 0, 8);
140 
141 	rc = sja1105_xfer(priv, rw, reg_addr, packed_buf, 8, ptp_sts);
142 
143 	if (rw == SPI_READ)
144 		sja1105_unpack(packed_buf, value, 63, 0, 8);
145 
146 	return rc;
147 }
148 
149 /* Same as above, but transfers only a 4 byte word */
150 int sja1105_xfer_u32(const struct sja1105_private *priv,
151 		     sja1105_spi_rw_mode_t rw, u64 reg_addr, u32 *value,
152 		     struct ptp_system_timestamp *ptp_sts)
153 {
154 	u8 packed_buf[4];
155 	u64 tmp;
156 	int rc;
157 
158 	if (rw == SPI_WRITE) {
159 		/* The packing API only supports u64 as CPU word size,
160 		 * so we need to convert.
161 		 */
162 		tmp = *value;
163 		sja1105_pack(packed_buf, &tmp, 31, 0, 4);
164 	}
165 
166 	rc = sja1105_xfer(priv, rw, reg_addr, packed_buf, 4, ptp_sts);
167 
168 	if (rw == SPI_READ) {
169 		sja1105_unpack(packed_buf, &tmp, 31, 0, 4);
170 		*value = tmp;
171 	}
172 
173 	return rc;
174 }
175 
176 static int sja1105et_reset_cmd(struct dsa_switch *ds)
177 {
178 	struct sja1105_private *priv = ds->priv;
179 	const struct sja1105_regs *regs = priv->info->regs;
180 	u32 cold_reset = BIT(3);
181 
182 	/* Cold reset */
183 	return sja1105_xfer_u32(priv, SPI_WRITE, regs->rgu, &cold_reset, NULL);
184 }
185 
186 static int sja1105pqrs_reset_cmd(struct dsa_switch *ds)
187 {
188 	struct sja1105_private *priv = ds->priv;
189 	const struct sja1105_regs *regs = priv->info->regs;
190 	u32 cold_reset = BIT(2);
191 
192 	/* Cold reset */
193 	return sja1105_xfer_u32(priv, SPI_WRITE, regs->rgu, &cold_reset, NULL);
194 }
195 
196 static int sja1110_reset_cmd(struct dsa_switch *ds)
197 {
198 	struct sja1105_private *priv = ds->priv;
199 	const struct sja1105_regs *regs = priv->info->regs;
200 	u32 switch_reset = BIT(20);
201 
202 	/* Only reset the switch core.
203 	 * A full cold reset would re-enable the BASE_MCSS_CLOCK PLL which
204 	 * would turn on the microcontroller, potentially letting it execute
205 	 * code which could interfere with our configuration.
206 	 */
207 	return sja1105_xfer_u32(priv, SPI_WRITE, regs->rgu, &switch_reset, NULL);
208 }
209 
210 int sja1105_inhibit_tx(const struct sja1105_private *priv,
211 		       unsigned long port_bitmap, bool tx_inhibited)
212 {
213 	const struct sja1105_regs *regs = priv->info->regs;
214 	u32 inhibit_cmd;
215 	int rc;
216 
217 	rc = sja1105_xfer_u32(priv, SPI_READ, regs->port_control,
218 			      &inhibit_cmd, NULL);
219 	if (rc < 0)
220 		return rc;
221 
222 	if (tx_inhibited)
223 		inhibit_cmd |= port_bitmap;
224 	else
225 		inhibit_cmd &= ~port_bitmap;
226 
227 	return sja1105_xfer_u32(priv, SPI_WRITE, regs->port_control,
228 				&inhibit_cmd, NULL);
229 }
230 
231 struct sja1105_status {
232 	u64 configs;
233 	u64 crcchkl;
234 	u64 ids;
235 	u64 crcchkg;
236 };
237 
238 /* This is not reading the entire General Status area, which is also
239  * divergent between E/T and P/Q/R/S, but only the relevant bits for
240  * ensuring that the static config upload procedure was successful.
241  */
242 static void sja1105_status_unpack(void *buf, struct sja1105_status *status)
243 {
244 	/* So that addition translates to 4 bytes */
245 	u32 *p = buf;
246 
247 	/* device_id is missing from the buffer, but we don't
248 	 * want to diverge from the manual definition of the
249 	 * register addresses, so we'll back off one step with
250 	 * the register pointer, and never access p[0].
251 	 */
252 	p--;
253 	sja1105_unpack(p + 0x1, &status->configs,   31, 31, 4);
254 	sja1105_unpack(p + 0x1, &status->crcchkl,   30, 30, 4);
255 	sja1105_unpack(p + 0x1, &status->ids,       29, 29, 4);
256 	sja1105_unpack(p + 0x1, &status->crcchkg,   28, 28, 4);
257 }
258 
259 static int sja1105_status_get(struct sja1105_private *priv,
260 			      struct sja1105_status *status)
261 {
262 	const struct sja1105_regs *regs = priv->info->regs;
263 	u8 packed_buf[4];
264 	int rc;
265 
266 	rc = sja1105_xfer_buf(priv, SPI_READ, regs->status, packed_buf, 4);
267 	if (rc < 0)
268 		return rc;
269 
270 	sja1105_status_unpack(packed_buf, status);
271 
272 	return 0;
273 }
274 
275 /* Not const because unpacking priv->static_config into buffers and preparing
276  * for upload requires the recalculation of table CRCs and updating the
277  * structures with these.
278  */
279 int static_config_buf_prepare_for_upload(struct sja1105_private *priv,
280 					 void *config_buf, int buf_len)
281 {
282 	struct sja1105_static_config *config = &priv->static_config;
283 	struct sja1105_table_header final_header;
284 	sja1105_config_valid_t valid;
285 	char *final_header_ptr;
286 	int crc_len;
287 
288 	valid = sja1105_static_config_check_valid(config,
289 						  priv->info->max_frame_mem);
290 	if (valid != SJA1105_CONFIG_OK) {
291 		dev_err(&priv->spidev->dev,
292 			sja1105_static_config_error_msg[valid]);
293 		return -EINVAL;
294 	}
295 
296 	/* Write Device ID and config tables to config_buf */
297 	sja1105_static_config_pack(config_buf, config);
298 	/* Recalculate CRC of the last header (right now 0xDEADBEEF).
299 	 * Don't include the CRC field itself.
300 	 */
301 	crc_len = buf_len - 4;
302 	/* Read the whole table header */
303 	final_header_ptr = config_buf + buf_len - SJA1105_SIZE_TABLE_HEADER;
304 	sja1105_table_header_packing(final_header_ptr, &final_header, UNPACK);
305 	/* Modify */
306 	final_header.crc = sja1105_crc32(config_buf, crc_len);
307 	/* Rewrite */
308 	sja1105_table_header_packing(final_header_ptr, &final_header, PACK);
309 
310 	return 0;
311 }
312 
313 #define RETRIES 10
314 
315 int sja1105_static_config_upload(struct sja1105_private *priv)
316 {
317 	struct sja1105_static_config *config = &priv->static_config;
318 	const struct sja1105_regs *regs = priv->info->regs;
319 	struct device *dev = &priv->spidev->dev;
320 	struct dsa_switch *ds = priv->ds;
321 	struct sja1105_status status;
322 	int rc, retries = RETRIES;
323 	u8 *config_buf;
324 	int buf_len;
325 
326 	buf_len = sja1105_static_config_get_length(config);
327 	config_buf = kcalloc(buf_len, sizeof(char), GFP_KERNEL);
328 	if (!config_buf)
329 		return -ENOMEM;
330 
331 	rc = static_config_buf_prepare_for_upload(priv, config_buf, buf_len);
332 	if (rc < 0) {
333 		dev_err(dev, "Invalid config, cannot upload\n");
334 		rc = -EINVAL;
335 		goto out;
336 	}
337 	/* Prevent PHY jabbering during switch reset by inhibiting
338 	 * Tx on all ports and waiting for current packet to drain.
339 	 * Otherwise, the PHY will see an unterminated Ethernet packet.
340 	 */
341 	rc = sja1105_inhibit_tx(priv, GENMASK_ULL(ds->num_ports - 1, 0), true);
342 	if (rc < 0) {
343 		dev_err(dev, "Failed to inhibit Tx on ports\n");
344 		rc = -ENXIO;
345 		goto out;
346 	}
347 	/* Wait for an eventual egress packet to finish transmission
348 	 * (reach IFG). It is guaranteed that a second one will not
349 	 * follow, and that switch cold reset is thus safe
350 	 */
351 	usleep_range(500, 1000);
352 	do {
353 		/* Put the SJA1105 in programming mode */
354 		rc = priv->info->reset_cmd(priv->ds);
355 		if (rc < 0) {
356 			dev_err(dev, "Failed to reset switch, retrying...\n");
357 			continue;
358 		}
359 		/* Wait for the switch to come out of reset */
360 		usleep_range(1000, 5000);
361 		/* Upload the static config to the device */
362 		rc = sja1105_xfer_buf(priv, SPI_WRITE, regs->config,
363 				      config_buf, buf_len);
364 		if (rc < 0) {
365 			dev_err(dev, "Failed to upload config, retrying...\n");
366 			continue;
367 		}
368 		/* Check that SJA1105 responded well to the config upload */
369 		rc = sja1105_status_get(priv, &status);
370 		if (rc < 0)
371 			continue;
372 
373 		if (status.ids == 1) {
374 			dev_err(dev, "Mismatch between hardware and static config "
375 				"device id. Wrote 0x%llx, wants 0x%llx\n",
376 				config->device_id, priv->info->device_id);
377 			continue;
378 		}
379 		if (status.crcchkl == 1) {
380 			dev_err(dev, "Switch reported invalid local CRC on "
381 				"the uploaded config, retrying...\n");
382 			continue;
383 		}
384 		if (status.crcchkg == 1) {
385 			dev_err(dev, "Switch reported invalid global CRC on "
386 				"the uploaded config, retrying...\n");
387 			continue;
388 		}
389 		if (status.configs == 0) {
390 			dev_err(dev, "Switch reported that configuration is "
391 				"invalid, retrying...\n");
392 			continue;
393 		}
394 		/* Success! */
395 		break;
396 	} while (--retries);
397 
398 	if (!retries) {
399 		rc = -EIO;
400 		dev_err(dev, "Failed to upload config to device, giving up\n");
401 		goto out;
402 	} else if (retries != RETRIES) {
403 		dev_info(dev, "Succeeded after %d tried\n", RETRIES - retries);
404 	}
405 
406 out:
407 	kfree(config_buf);
408 	return rc;
409 }
410 
411 static const struct sja1105_regs sja1105et_regs = {
412 	.device_id = 0x0,
413 	.prod_id = 0x100BC3,
414 	.status = 0x1,
415 	.port_control = 0x11,
416 	.vl_status = 0x10000,
417 	.config = 0x020000,
418 	.rgu = 0x100440,
419 	/* UM10944.pdf, Table 86, ACU Register overview */
420 	.pad_mii_tx = {0x100800, 0x100802, 0x100804, 0x100806, 0x100808},
421 	.pad_mii_rx = {0x100801, 0x100803, 0x100805, 0x100807, 0x100809},
422 	.rmii_pll1 = 0x10000A,
423 	.cgu_idiv = {0x10000B, 0x10000C, 0x10000D, 0x10000E, 0x10000F},
424 	.stats[MAC] = {0x200, 0x202, 0x204, 0x206, 0x208},
425 	.stats[HL1] = {0x400, 0x410, 0x420, 0x430, 0x440},
426 	.stats[HL2] = {0x600, 0x610, 0x620, 0x630, 0x640},
427 	/* UM10944.pdf, Table 78, CGU Register overview */
428 	.mii_tx_clk = {0x100013, 0x10001A, 0x100021, 0x100028, 0x10002F},
429 	.mii_rx_clk = {0x100014, 0x10001B, 0x100022, 0x100029, 0x100030},
430 	.mii_ext_tx_clk = {0x100018, 0x10001F, 0x100026, 0x10002D, 0x100034},
431 	.mii_ext_rx_clk = {0x100019, 0x100020, 0x100027, 0x10002E, 0x100035},
432 	.rgmii_tx_clk = {0x100016, 0x10001D, 0x100024, 0x10002B, 0x100032},
433 	.rmii_ref_clk = {0x100015, 0x10001C, 0x100023, 0x10002A, 0x100031},
434 	.rmii_ext_tx_clk = {0x100018, 0x10001F, 0x100026, 0x10002D, 0x100034},
435 	.ptpegr_ts = {0xC0, 0xC2, 0xC4, 0xC6, 0xC8},
436 	.ptpschtm = 0x12, /* Spans 0x12 to 0x13 */
437 	.ptppinst = 0x14,
438 	.ptppindur = 0x16,
439 	.ptp_control = 0x17,
440 	.ptpclkval = 0x18, /* Spans 0x18 to 0x19 */
441 	.ptpclkrate = 0x1A,
442 	.ptpclkcorp = 0x1D,
443 	.mdio_100base_tx = SJA1105_RSV_ADDR,
444 	.mdio_100base_t1 = SJA1105_RSV_ADDR,
445 };
446 
447 static const struct sja1105_regs sja1105pqrs_regs = {
448 	.device_id = 0x0,
449 	.prod_id = 0x100BC3,
450 	.status = 0x1,
451 	.port_control = 0x12,
452 	.vl_status = 0x10000,
453 	.config = 0x020000,
454 	.rgu = 0x100440,
455 	/* UM10944.pdf, Table 86, ACU Register overview */
456 	.pad_mii_tx = {0x100800, 0x100802, 0x100804, 0x100806, 0x100808},
457 	.pad_mii_rx = {0x100801, 0x100803, 0x100805, 0x100807, 0x100809},
458 	.pad_mii_id = {0x100810, 0x100811, 0x100812, 0x100813, 0x100814},
459 	.rmii_pll1 = 0x10000A,
460 	.cgu_idiv = {0x10000B, 0x10000C, 0x10000D, 0x10000E, 0x10000F},
461 	.stats[MAC] = {0x200, 0x202, 0x204, 0x206, 0x208},
462 	.stats[HL1] = {0x400, 0x410, 0x420, 0x430, 0x440},
463 	.stats[HL2] = {0x600, 0x610, 0x620, 0x630, 0x640},
464 	.stats[ETHER] = {0x1400, 0x1418, 0x1430, 0x1448, 0x1460},
465 	/* UM11040.pdf, Table 114 */
466 	.mii_tx_clk = {0x100013, 0x100019, 0x10001F, 0x100025, 0x10002B},
467 	.mii_rx_clk = {0x100014, 0x10001A, 0x100020, 0x100026, 0x10002C},
468 	.mii_ext_tx_clk = {0x100017, 0x10001D, 0x100023, 0x100029, 0x10002F},
469 	.mii_ext_rx_clk = {0x100018, 0x10001E, 0x100024, 0x10002A, 0x100030},
470 	.rgmii_tx_clk = {0x100016, 0x10001C, 0x100022, 0x100028, 0x10002E},
471 	.rmii_ref_clk = {0x100015, 0x10001B, 0x100021, 0x100027, 0x10002D},
472 	.rmii_ext_tx_clk = {0x100017, 0x10001D, 0x100023, 0x100029, 0x10002F},
473 	.ptpegr_ts = {0xC0, 0xC4, 0xC8, 0xCC, 0xD0},
474 	.ptpschtm = 0x13, /* Spans 0x13 to 0x14 */
475 	.ptppinst = 0x15,
476 	.ptppindur = 0x17,
477 	.ptp_control = 0x18,
478 	.ptpclkval = 0x19,
479 	.ptpclkrate = 0x1B,
480 	.ptpclkcorp = 0x1E,
481 	.ptpsyncts = 0x1F,
482 	.mdio_100base_tx = SJA1105_RSV_ADDR,
483 	.mdio_100base_t1 = SJA1105_RSV_ADDR,
484 };
485 
486 static const struct sja1105_regs sja1110_regs = {
487 	.device_id = SJA1110_SPI_ADDR(0x0),
488 	.prod_id = SJA1110_ACU_ADDR(0xf00),
489 	.status = SJA1110_SPI_ADDR(0x4),
490 	.port_control = SJA1110_SPI_ADDR(0x50), /* actually INHIB_TX */
491 	.vl_status = 0x10000,
492 	.config = 0x020000,
493 	.rgu = SJA1110_RGU_ADDR(0x100), /* Reset Control Register 0 */
494 	/* Ports 2 and 3 are capable of xMII, but there isn't anything to
495 	 * configure in the CGU/ACU for them.
496 	 */
497 	.pad_mii_tx = {SJA1105_RSV_ADDR, SJA1105_RSV_ADDR,
498 		       SJA1105_RSV_ADDR, SJA1105_RSV_ADDR,
499 		       SJA1105_RSV_ADDR, SJA1105_RSV_ADDR,
500 		       SJA1105_RSV_ADDR, SJA1105_RSV_ADDR,
501 		       SJA1105_RSV_ADDR, SJA1105_RSV_ADDR,
502 		       SJA1105_RSV_ADDR},
503 	.pad_mii_rx = {SJA1105_RSV_ADDR, SJA1105_RSV_ADDR,
504 		       SJA1105_RSV_ADDR, SJA1105_RSV_ADDR,
505 		       SJA1105_RSV_ADDR, SJA1105_RSV_ADDR,
506 		       SJA1105_RSV_ADDR, SJA1105_RSV_ADDR,
507 		       SJA1105_RSV_ADDR, SJA1105_RSV_ADDR,
508 		       SJA1105_RSV_ADDR},
509 	.pad_mii_id = {SJA1105_RSV_ADDR, SJA1105_RSV_ADDR,
510 		       SJA1110_ACU_ADDR(0x18), SJA1110_ACU_ADDR(0x28),
511 		       SJA1105_RSV_ADDR, SJA1105_RSV_ADDR,
512 		       SJA1105_RSV_ADDR, SJA1105_RSV_ADDR,
513 		       SJA1105_RSV_ADDR, SJA1105_RSV_ADDR,
514 		       SJA1105_RSV_ADDR},
515 	.rmii_pll1 = SJA1105_RSV_ADDR,
516 	.cgu_idiv = {SJA1105_RSV_ADDR, SJA1105_RSV_ADDR, SJA1105_RSV_ADDR,
517 		     SJA1105_RSV_ADDR, SJA1105_RSV_ADDR, SJA1105_RSV_ADDR,
518 		     SJA1105_RSV_ADDR, SJA1105_RSV_ADDR, SJA1105_RSV_ADDR,
519 		     SJA1105_RSV_ADDR, SJA1105_RSV_ADDR},
520 	.stats[MAC] = {0x200, 0x202, 0x204, 0x206, 0x208, 0x20a,
521 		       0x20c, 0x20e, 0x210, 0x212, 0x214},
522 	.stats[HL1] = {0x400, 0x410, 0x420, 0x430, 0x440, 0x450,
523 		       0x460, 0x470, 0x480, 0x490, 0x4a0},
524 	.stats[HL2] = {0x600, 0x610, 0x620, 0x630, 0x640, 0x650,
525 		       0x660, 0x670, 0x680, 0x690, 0x6a0},
526 	.stats[ETHER] = {0x1400, 0x1418, 0x1430, 0x1448, 0x1460, 0x1478,
527 			 0x1490, 0x14a8, 0x14c0, 0x14d8, 0x14f0},
528 	.mii_tx_clk = {SJA1105_RSV_ADDR, SJA1105_RSV_ADDR, SJA1105_RSV_ADDR,
529 		       SJA1105_RSV_ADDR, SJA1105_RSV_ADDR, SJA1105_RSV_ADDR,
530 		       SJA1105_RSV_ADDR, SJA1105_RSV_ADDR, SJA1105_RSV_ADDR,
531 		       SJA1105_RSV_ADDR, SJA1105_RSV_ADDR},
532 	.mii_rx_clk = {SJA1105_RSV_ADDR, SJA1105_RSV_ADDR, SJA1105_RSV_ADDR,
533 		       SJA1105_RSV_ADDR, SJA1105_RSV_ADDR, SJA1105_RSV_ADDR,
534 		       SJA1105_RSV_ADDR, SJA1105_RSV_ADDR, SJA1105_RSV_ADDR,
535 		       SJA1105_RSV_ADDR, SJA1105_RSV_ADDR},
536 	.mii_ext_tx_clk = {SJA1105_RSV_ADDR, SJA1105_RSV_ADDR, SJA1105_RSV_ADDR,
537 			   SJA1105_RSV_ADDR, SJA1105_RSV_ADDR, SJA1105_RSV_ADDR,
538 			   SJA1105_RSV_ADDR, SJA1105_RSV_ADDR, SJA1105_RSV_ADDR,
539 			   SJA1105_RSV_ADDR, SJA1105_RSV_ADDR},
540 	.mii_ext_rx_clk = {SJA1105_RSV_ADDR, SJA1105_RSV_ADDR, SJA1105_RSV_ADDR,
541 			   SJA1105_RSV_ADDR, SJA1105_RSV_ADDR, SJA1105_RSV_ADDR,
542 			   SJA1105_RSV_ADDR, SJA1105_RSV_ADDR, SJA1105_RSV_ADDR,
543 			   SJA1105_RSV_ADDR, SJA1105_RSV_ADDR},
544 	.rgmii_tx_clk = {SJA1105_RSV_ADDR, SJA1105_RSV_ADDR, SJA1105_RSV_ADDR,
545 			 SJA1105_RSV_ADDR, SJA1105_RSV_ADDR, SJA1105_RSV_ADDR,
546 			 SJA1105_RSV_ADDR, SJA1105_RSV_ADDR, SJA1105_RSV_ADDR,
547 			 SJA1105_RSV_ADDR, SJA1105_RSV_ADDR},
548 	.rmii_ref_clk = {SJA1105_RSV_ADDR, SJA1105_RSV_ADDR, SJA1105_RSV_ADDR,
549 			 SJA1105_RSV_ADDR, SJA1105_RSV_ADDR, SJA1105_RSV_ADDR,
550 			 SJA1105_RSV_ADDR, SJA1105_RSV_ADDR, SJA1105_RSV_ADDR,
551 			 SJA1105_RSV_ADDR, SJA1105_RSV_ADDR},
552 	.rmii_ext_tx_clk = {SJA1105_RSV_ADDR, SJA1105_RSV_ADDR,
553 			    SJA1105_RSV_ADDR, SJA1105_RSV_ADDR,
554 			    SJA1105_RSV_ADDR, SJA1105_RSV_ADDR,
555 			    SJA1105_RSV_ADDR, SJA1105_RSV_ADDR,
556 			    SJA1105_RSV_ADDR, SJA1105_RSV_ADDR,
557 			    SJA1105_RSV_ADDR},
558 	.ptpschtm = SJA1110_SPI_ADDR(0x54),
559 	.ptppinst = SJA1110_SPI_ADDR(0x5c),
560 	.ptppindur = SJA1110_SPI_ADDR(0x64),
561 	.ptp_control = SJA1110_SPI_ADDR(0x68),
562 	.ptpclkval = SJA1110_SPI_ADDR(0x6c),
563 	.ptpclkrate = SJA1110_SPI_ADDR(0x74),
564 	.ptpclkcorp = SJA1110_SPI_ADDR(0x80),
565 	.ptpsyncts = SJA1110_SPI_ADDR(0x84),
566 	.mdio_100base_tx = 0x1c2400,
567 	.mdio_100base_t1 = 0x1c1000,
568 	.pcs_base = {SJA1105_RSV_ADDR, 0x1c1400, 0x1c1800, 0x1c1c00, 0x1c2000,
569 		     SJA1105_RSV_ADDR, SJA1105_RSV_ADDR, SJA1105_RSV_ADDR,
570 		     SJA1105_RSV_ADDR, SJA1105_RSV_ADDR, SJA1105_RSV_ADDR},
571 };
572 
573 const struct sja1105_info sja1105e_info = {
574 	.device_id		= SJA1105E_DEVICE_ID,
575 	.part_no		= SJA1105ET_PART_NO,
576 	.static_ops		= sja1105e_table_ops,
577 	.dyn_ops		= sja1105et_dyn_ops,
578 	.tag_proto		= DSA_TAG_PROTO_SJA1105,
579 	.can_limit_mcast_flood	= false,
580 	.ptp_ts_bits		= 24,
581 	.ptpegr_ts_bytes	= 4,
582 	.max_frame_mem		= SJA1105_MAX_FRAME_MEMORY,
583 	.num_ports		= SJA1105_NUM_PORTS,
584 	.num_cbs_shapers	= SJA1105ET_MAX_CBS_COUNT,
585 	.reset_cmd		= sja1105et_reset_cmd,
586 	.fdb_add_cmd		= sja1105et_fdb_add,
587 	.fdb_del_cmd		= sja1105et_fdb_del,
588 	.ptp_cmd_packing	= sja1105et_ptp_cmd_packing,
589 	.rxtstamp		= sja1105_rxtstamp,
590 	.clocking_setup		= sja1105_clocking_setup,
591 	.regs			= &sja1105et_regs,
592 	.port_speed		= {
593 		[SJA1105_SPEED_AUTO] = 0,
594 		[SJA1105_SPEED_10MBPS] = 3,
595 		[SJA1105_SPEED_100MBPS] = 2,
596 		[SJA1105_SPEED_1000MBPS] = 1,
597 		[SJA1105_SPEED_2500MBPS] = 0, /* Not supported */
598 	},
599 	.supports_mii		= {true, true, true, true, true},
600 	.supports_rmii		= {true, true, true, true, true},
601 	.supports_rgmii		= {true, true, true, true, true},
602 	.name			= "SJA1105E",
603 };
604 
605 const struct sja1105_info sja1105t_info = {
606 	.device_id		= SJA1105T_DEVICE_ID,
607 	.part_no		= SJA1105ET_PART_NO,
608 	.static_ops		= sja1105t_table_ops,
609 	.dyn_ops		= sja1105et_dyn_ops,
610 	.tag_proto		= DSA_TAG_PROTO_SJA1105,
611 	.can_limit_mcast_flood	= false,
612 	.ptp_ts_bits		= 24,
613 	.ptpegr_ts_bytes	= 4,
614 	.max_frame_mem		= SJA1105_MAX_FRAME_MEMORY,
615 	.num_ports		= SJA1105_NUM_PORTS,
616 	.num_cbs_shapers	= SJA1105ET_MAX_CBS_COUNT,
617 	.reset_cmd		= sja1105et_reset_cmd,
618 	.fdb_add_cmd		= sja1105et_fdb_add,
619 	.fdb_del_cmd		= sja1105et_fdb_del,
620 	.ptp_cmd_packing	= sja1105et_ptp_cmd_packing,
621 	.rxtstamp		= sja1105_rxtstamp,
622 	.clocking_setup		= sja1105_clocking_setup,
623 	.regs			= &sja1105et_regs,
624 	.port_speed		= {
625 		[SJA1105_SPEED_AUTO] = 0,
626 		[SJA1105_SPEED_10MBPS] = 3,
627 		[SJA1105_SPEED_100MBPS] = 2,
628 		[SJA1105_SPEED_1000MBPS] = 1,
629 		[SJA1105_SPEED_2500MBPS] = 0, /* Not supported */
630 	},
631 	.supports_mii		= {true, true, true, true, true},
632 	.supports_rmii		= {true, true, true, true, true},
633 	.supports_rgmii		= {true, true, true, true, true},
634 	.name			= "SJA1105T",
635 };
636 
637 const struct sja1105_info sja1105p_info = {
638 	.device_id		= SJA1105PR_DEVICE_ID,
639 	.part_no		= SJA1105P_PART_NO,
640 	.static_ops		= sja1105p_table_ops,
641 	.dyn_ops		= sja1105pqrs_dyn_ops,
642 	.tag_proto		= DSA_TAG_PROTO_SJA1105,
643 	.can_limit_mcast_flood	= true,
644 	.ptp_ts_bits		= 32,
645 	.ptpegr_ts_bytes	= 8,
646 	.max_frame_mem		= SJA1105_MAX_FRAME_MEMORY,
647 	.num_ports		= SJA1105_NUM_PORTS,
648 	.num_cbs_shapers	= SJA1105PQRS_MAX_CBS_COUNT,
649 	.setup_rgmii_delay	= sja1105pqrs_setup_rgmii_delay,
650 	.reset_cmd		= sja1105pqrs_reset_cmd,
651 	.fdb_add_cmd		= sja1105pqrs_fdb_add,
652 	.fdb_del_cmd		= sja1105pqrs_fdb_del,
653 	.ptp_cmd_packing	= sja1105pqrs_ptp_cmd_packing,
654 	.rxtstamp		= sja1105_rxtstamp,
655 	.clocking_setup		= sja1105_clocking_setup,
656 	.regs			= &sja1105pqrs_regs,
657 	.port_speed		= {
658 		[SJA1105_SPEED_AUTO] = 0,
659 		[SJA1105_SPEED_10MBPS] = 3,
660 		[SJA1105_SPEED_100MBPS] = 2,
661 		[SJA1105_SPEED_1000MBPS] = 1,
662 		[SJA1105_SPEED_2500MBPS] = 0, /* Not supported */
663 	},
664 	.supports_mii		= {true, true, true, true, true},
665 	.supports_rmii		= {true, true, true, true, true},
666 	.supports_rgmii		= {true, true, true, true, true},
667 	.name			= "SJA1105P",
668 };
669 
670 const struct sja1105_info sja1105q_info = {
671 	.device_id		= SJA1105QS_DEVICE_ID,
672 	.part_no		= SJA1105Q_PART_NO,
673 	.static_ops		= sja1105q_table_ops,
674 	.dyn_ops		= sja1105pqrs_dyn_ops,
675 	.tag_proto		= DSA_TAG_PROTO_SJA1105,
676 	.can_limit_mcast_flood	= true,
677 	.ptp_ts_bits		= 32,
678 	.ptpegr_ts_bytes	= 8,
679 	.max_frame_mem		= SJA1105_MAX_FRAME_MEMORY,
680 	.num_ports		= SJA1105_NUM_PORTS,
681 	.num_cbs_shapers	= SJA1105PQRS_MAX_CBS_COUNT,
682 	.setup_rgmii_delay	= sja1105pqrs_setup_rgmii_delay,
683 	.reset_cmd		= sja1105pqrs_reset_cmd,
684 	.fdb_add_cmd		= sja1105pqrs_fdb_add,
685 	.fdb_del_cmd		= sja1105pqrs_fdb_del,
686 	.ptp_cmd_packing	= sja1105pqrs_ptp_cmd_packing,
687 	.rxtstamp		= sja1105_rxtstamp,
688 	.clocking_setup		= sja1105_clocking_setup,
689 	.regs			= &sja1105pqrs_regs,
690 	.port_speed		= {
691 		[SJA1105_SPEED_AUTO] = 0,
692 		[SJA1105_SPEED_10MBPS] = 3,
693 		[SJA1105_SPEED_100MBPS] = 2,
694 		[SJA1105_SPEED_1000MBPS] = 1,
695 		[SJA1105_SPEED_2500MBPS] = 0, /* Not supported */
696 	},
697 	.supports_mii		= {true, true, true, true, true},
698 	.supports_rmii		= {true, true, true, true, true},
699 	.supports_rgmii		= {true, true, true, true, true},
700 	.name			= "SJA1105Q",
701 };
702 
703 const struct sja1105_info sja1105r_info = {
704 	.device_id		= SJA1105PR_DEVICE_ID,
705 	.part_no		= SJA1105R_PART_NO,
706 	.static_ops		= sja1105r_table_ops,
707 	.dyn_ops		= sja1105pqrs_dyn_ops,
708 	.tag_proto		= DSA_TAG_PROTO_SJA1105,
709 	.can_limit_mcast_flood	= true,
710 	.ptp_ts_bits		= 32,
711 	.ptpegr_ts_bytes	= 8,
712 	.max_frame_mem		= SJA1105_MAX_FRAME_MEMORY,
713 	.num_ports		= SJA1105_NUM_PORTS,
714 	.num_cbs_shapers	= SJA1105PQRS_MAX_CBS_COUNT,
715 	.setup_rgmii_delay	= sja1105pqrs_setup_rgmii_delay,
716 	.reset_cmd		= sja1105pqrs_reset_cmd,
717 	.fdb_add_cmd		= sja1105pqrs_fdb_add,
718 	.fdb_del_cmd		= sja1105pqrs_fdb_del,
719 	.ptp_cmd_packing	= sja1105pqrs_ptp_cmd_packing,
720 	.rxtstamp		= sja1105_rxtstamp,
721 	.clocking_setup		= sja1105_clocking_setup,
722 	.pcs_mdio_read_c45	= sja1105_pcs_mdio_read_c45,
723 	.pcs_mdio_write_c45	= sja1105_pcs_mdio_write_c45,
724 	.regs			= &sja1105pqrs_regs,
725 	.port_speed		= {
726 		[SJA1105_SPEED_AUTO] = 0,
727 		[SJA1105_SPEED_10MBPS] = 3,
728 		[SJA1105_SPEED_100MBPS] = 2,
729 		[SJA1105_SPEED_1000MBPS] = 1,
730 		[SJA1105_SPEED_2500MBPS] = 0, /* Not supported */
731 	},
732 	.supports_mii		= {true, true, true, true, true},
733 	.supports_rmii		= {true, true, true, true, true},
734 	.supports_rgmii		= {true, true, true, true, true},
735 	.supports_sgmii		= {false, false, false, false, true},
736 	.name			= "SJA1105R",
737 };
738 
739 const struct sja1105_info sja1105s_info = {
740 	.device_id		= SJA1105QS_DEVICE_ID,
741 	.part_no		= SJA1105S_PART_NO,
742 	.static_ops		= sja1105s_table_ops,
743 	.dyn_ops		= sja1105pqrs_dyn_ops,
744 	.regs			= &sja1105pqrs_regs,
745 	.tag_proto		= DSA_TAG_PROTO_SJA1105,
746 	.can_limit_mcast_flood	= true,
747 	.ptp_ts_bits		= 32,
748 	.ptpegr_ts_bytes	= 8,
749 	.max_frame_mem		= SJA1105_MAX_FRAME_MEMORY,
750 	.num_ports		= SJA1105_NUM_PORTS,
751 	.num_cbs_shapers	= SJA1105PQRS_MAX_CBS_COUNT,
752 	.setup_rgmii_delay	= sja1105pqrs_setup_rgmii_delay,
753 	.reset_cmd		= sja1105pqrs_reset_cmd,
754 	.fdb_add_cmd		= sja1105pqrs_fdb_add,
755 	.fdb_del_cmd		= sja1105pqrs_fdb_del,
756 	.ptp_cmd_packing	= sja1105pqrs_ptp_cmd_packing,
757 	.rxtstamp		= sja1105_rxtstamp,
758 	.clocking_setup		= sja1105_clocking_setup,
759 	.pcs_mdio_read_c45	= sja1105_pcs_mdio_read_c45,
760 	.pcs_mdio_write_c45	= sja1105_pcs_mdio_write_c45,
761 	.port_speed		= {
762 		[SJA1105_SPEED_AUTO] = 0,
763 		[SJA1105_SPEED_10MBPS] = 3,
764 		[SJA1105_SPEED_100MBPS] = 2,
765 		[SJA1105_SPEED_1000MBPS] = 1,
766 		[SJA1105_SPEED_2500MBPS] = 0, /* Not supported */
767 	},
768 	.supports_mii		= {true, true, true, true, true},
769 	.supports_rmii		= {true, true, true, true, true},
770 	.supports_rgmii		= {true, true, true, true, true},
771 	.supports_sgmii		= {false, false, false, false, true},
772 	.name			= "SJA1105S",
773 };
774 
775 const struct sja1105_info sja1110a_info = {
776 	.device_id		= SJA1110_DEVICE_ID,
777 	.part_no		= SJA1110A_PART_NO,
778 	.static_ops		= sja1110_table_ops,
779 	.dyn_ops		= sja1110_dyn_ops,
780 	.regs			= &sja1110_regs,
781 	.tag_proto		= DSA_TAG_PROTO_SJA1110,
782 	.can_limit_mcast_flood	= true,
783 	.multiple_cascade_ports	= true,
784 	.fixed_cbs_mapping	= true,
785 	.ptp_ts_bits		= 32,
786 	.ptpegr_ts_bytes	= 8,
787 	.max_frame_mem		= SJA1110_MAX_FRAME_MEMORY,
788 	.num_ports		= SJA1110_NUM_PORTS,
789 	.num_cbs_shapers	= SJA1110_MAX_CBS_COUNT,
790 	.setup_rgmii_delay	= sja1110_setup_rgmii_delay,
791 	.reset_cmd		= sja1110_reset_cmd,
792 	.fdb_add_cmd		= sja1105pqrs_fdb_add,
793 	.fdb_del_cmd		= sja1105pqrs_fdb_del,
794 	.ptp_cmd_packing	= sja1105pqrs_ptp_cmd_packing,
795 	.rxtstamp		= sja1110_rxtstamp,
796 	.txtstamp		= sja1110_txtstamp,
797 	.disable_microcontroller = sja1110_disable_microcontroller,
798 	.pcs_mdio_read_c45	= sja1110_pcs_mdio_read_c45,
799 	.pcs_mdio_write_c45	= sja1110_pcs_mdio_write_c45,
800 	.port_speed		= {
801 		[SJA1105_SPEED_AUTO] = 0,
802 		[SJA1105_SPEED_10MBPS] = 4,
803 		[SJA1105_SPEED_100MBPS] = 3,
804 		[SJA1105_SPEED_1000MBPS] = 2,
805 		[SJA1105_SPEED_2500MBPS] = 1,
806 	},
807 	.supports_mii		= {true, true, true, true, false,
808 				   true, true, true, true, true, true},
809 	.supports_rmii		= {false, false, true, true, false,
810 				   false, false, false, false, false, false},
811 	.supports_rgmii		= {false, false, true, true, false,
812 				   false, false, false, false, false, false},
813 	.supports_sgmii		= {false, true, true, true, true,
814 				   false, false, false, false, false, false},
815 	.supports_2500basex	= {false, false, false, true, true,
816 				   false, false, false, false, false, false},
817 	.internal_phy		= {SJA1105_NO_PHY, SJA1105_PHY_BASE_TX,
818 				   SJA1105_NO_PHY, SJA1105_NO_PHY,
819 				   SJA1105_NO_PHY, SJA1105_PHY_BASE_T1,
820 				   SJA1105_PHY_BASE_T1, SJA1105_PHY_BASE_T1,
821 				   SJA1105_PHY_BASE_T1, SJA1105_PHY_BASE_T1,
822 				   SJA1105_PHY_BASE_T1},
823 	.name			= "SJA1110A",
824 };
825 
826 const struct sja1105_info sja1110b_info = {
827 	.device_id		= SJA1110_DEVICE_ID,
828 	.part_no		= SJA1110B_PART_NO,
829 	.static_ops		= sja1110_table_ops,
830 	.dyn_ops		= sja1110_dyn_ops,
831 	.regs			= &sja1110_regs,
832 	.tag_proto		= DSA_TAG_PROTO_SJA1110,
833 	.can_limit_mcast_flood	= true,
834 	.multiple_cascade_ports	= true,
835 	.fixed_cbs_mapping	= true,
836 	.ptp_ts_bits		= 32,
837 	.ptpegr_ts_bytes	= 8,
838 	.max_frame_mem		= SJA1110_MAX_FRAME_MEMORY,
839 	.num_ports		= SJA1110_NUM_PORTS,
840 	.num_cbs_shapers	= SJA1110_MAX_CBS_COUNT,
841 	.setup_rgmii_delay	= sja1110_setup_rgmii_delay,
842 	.reset_cmd		= sja1110_reset_cmd,
843 	.fdb_add_cmd		= sja1105pqrs_fdb_add,
844 	.fdb_del_cmd		= sja1105pqrs_fdb_del,
845 	.ptp_cmd_packing	= sja1105pqrs_ptp_cmd_packing,
846 	.rxtstamp		= sja1110_rxtstamp,
847 	.txtstamp		= sja1110_txtstamp,
848 	.disable_microcontroller = sja1110_disable_microcontroller,
849 	.pcs_mdio_read_c45	= sja1110_pcs_mdio_read_c45,
850 	.pcs_mdio_write_c45	= sja1110_pcs_mdio_write_c45,
851 	.port_speed		= {
852 		[SJA1105_SPEED_AUTO] = 0,
853 		[SJA1105_SPEED_10MBPS] = 4,
854 		[SJA1105_SPEED_100MBPS] = 3,
855 		[SJA1105_SPEED_1000MBPS] = 2,
856 		[SJA1105_SPEED_2500MBPS] = 1,
857 	},
858 	.supports_mii		= {true, true, true, true, false,
859 				   true, true, true, true, true, false},
860 	.supports_rmii		= {false, false, true, true, false,
861 				   false, false, false, false, false, false},
862 	.supports_rgmii		= {false, false, true, true, false,
863 				   false, false, false, false, false, false},
864 	.supports_sgmii		= {false, false, false, true, true,
865 				   false, false, false, false, false, false},
866 	.supports_2500basex	= {false, false, false, true, true,
867 				   false, false, false, false, false, false},
868 	.internal_phy		= {SJA1105_NO_PHY, SJA1105_PHY_BASE_TX,
869 				   SJA1105_NO_PHY, SJA1105_NO_PHY,
870 				   SJA1105_NO_PHY, SJA1105_PHY_BASE_T1,
871 				   SJA1105_PHY_BASE_T1, SJA1105_PHY_BASE_T1,
872 				   SJA1105_PHY_BASE_T1, SJA1105_PHY_BASE_T1,
873 				   SJA1105_NO_PHY},
874 	.name			= "SJA1110B",
875 };
876 
877 const struct sja1105_info sja1110c_info = {
878 	.device_id		= SJA1110_DEVICE_ID,
879 	.part_no		= SJA1110C_PART_NO,
880 	.static_ops		= sja1110_table_ops,
881 	.dyn_ops		= sja1110_dyn_ops,
882 	.regs			= &sja1110_regs,
883 	.tag_proto		= DSA_TAG_PROTO_SJA1110,
884 	.can_limit_mcast_flood	= true,
885 	.multiple_cascade_ports	= true,
886 	.fixed_cbs_mapping	= true,
887 	.ptp_ts_bits		= 32,
888 	.ptpegr_ts_bytes	= 8,
889 	.max_frame_mem		= SJA1110_MAX_FRAME_MEMORY,
890 	.num_ports		= SJA1110_NUM_PORTS,
891 	.num_cbs_shapers	= SJA1110_MAX_CBS_COUNT,
892 	.setup_rgmii_delay	= sja1110_setup_rgmii_delay,
893 	.reset_cmd		= sja1110_reset_cmd,
894 	.fdb_add_cmd		= sja1105pqrs_fdb_add,
895 	.fdb_del_cmd		= sja1105pqrs_fdb_del,
896 	.ptp_cmd_packing	= sja1105pqrs_ptp_cmd_packing,
897 	.rxtstamp		= sja1110_rxtstamp,
898 	.txtstamp		= sja1110_txtstamp,
899 	.disable_microcontroller = sja1110_disable_microcontroller,
900 	.pcs_mdio_read_c45	= sja1110_pcs_mdio_read_c45,
901 	.pcs_mdio_write_c45	= sja1110_pcs_mdio_write_c45,
902 	.port_speed		= {
903 		[SJA1105_SPEED_AUTO] = 0,
904 		[SJA1105_SPEED_10MBPS] = 4,
905 		[SJA1105_SPEED_100MBPS] = 3,
906 		[SJA1105_SPEED_1000MBPS] = 2,
907 		[SJA1105_SPEED_2500MBPS] = 1,
908 	},
909 	.supports_mii		= {true, true, true, true, false,
910 				   true, true, true, false, false, false},
911 	.supports_rmii		= {false, false, true, true, false,
912 				   false, false, false, false, false, false},
913 	.supports_rgmii		= {false, false, true, true, false,
914 				   false, false, false, false, false, false},
915 	.supports_sgmii		= {false, false, false, false, true,
916 				   false, false, false, false, false, false},
917 	.supports_2500basex	= {false, false, false, false, true,
918 				   false, false, false, false, false, false},
919 	.internal_phy		= {SJA1105_NO_PHY, SJA1105_PHY_BASE_TX,
920 				   SJA1105_NO_PHY, SJA1105_NO_PHY,
921 				   SJA1105_NO_PHY, SJA1105_PHY_BASE_T1,
922 				   SJA1105_PHY_BASE_T1, SJA1105_PHY_BASE_T1,
923 				   SJA1105_NO_PHY, SJA1105_NO_PHY,
924 				   SJA1105_NO_PHY},
925 	.name			= "SJA1110C",
926 };
927 
928 const struct sja1105_info sja1110d_info = {
929 	.device_id		= SJA1110_DEVICE_ID,
930 	.part_no		= SJA1110D_PART_NO,
931 	.static_ops		= sja1110_table_ops,
932 	.dyn_ops		= sja1110_dyn_ops,
933 	.regs			= &sja1110_regs,
934 	.tag_proto		= DSA_TAG_PROTO_SJA1110,
935 	.can_limit_mcast_flood	= true,
936 	.multiple_cascade_ports	= true,
937 	.fixed_cbs_mapping	= true,
938 	.ptp_ts_bits		= 32,
939 	.ptpegr_ts_bytes	= 8,
940 	.max_frame_mem		= SJA1110_MAX_FRAME_MEMORY,
941 	.num_ports		= SJA1110_NUM_PORTS,
942 	.num_cbs_shapers	= SJA1110_MAX_CBS_COUNT,
943 	.setup_rgmii_delay	= sja1110_setup_rgmii_delay,
944 	.reset_cmd		= sja1110_reset_cmd,
945 	.fdb_add_cmd		= sja1105pqrs_fdb_add,
946 	.fdb_del_cmd		= sja1105pqrs_fdb_del,
947 	.ptp_cmd_packing	= sja1105pqrs_ptp_cmd_packing,
948 	.rxtstamp		= sja1110_rxtstamp,
949 	.txtstamp		= sja1110_txtstamp,
950 	.disable_microcontroller = sja1110_disable_microcontroller,
951 	.pcs_mdio_read_c45	= sja1110_pcs_mdio_read_c45,
952 	.pcs_mdio_write_c45	= sja1110_pcs_mdio_write_c45,
953 	.port_speed		= {
954 		[SJA1105_SPEED_AUTO] = 0,
955 		[SJA1105_SPEED_10MBPS] = 4,
956 		[SJA1105_SPEED_100MBPS] = 3,
957 		[SJA1105_SPEED_1000MBPS] = 2,
958 		[SJA1105_SPEED_2500MBPS] = 1,
959 	},
960 	.supports_mii		= {true, false, true, false, false,
961 				   true, true, true, false, false, false},
962 	.supports_rmii		= {false, false, true, false, false,
963 				   false, false, false, false, false, false},
964 	.supports_rgmii		= {false, false, true, false, false,
965 				   false, false, false, false, false, false},
966 	.supports_sgmii		= {false, true, true, true, true,
967 				   false, false, false, false, false, false},
968 	.supports_2500basex     = {false, false, false, true, true,
969 				   false, false, false, false, false, false},
970 	.internal_phy		= {SJA1105_NO_PHY, SJA1105_NO_PHY,
971 				   SJA1105_NO_PHY, SJA1105_NO_PHY,
972 				   SJA1105_NO_PHY, SJA1105_PHY_BASE_T1,
973 				   SJA1105_PHY_BASE_T1, SJA1105_PHY_BASE_T1,
974 				   SJA1105_NO_PHY, SJA1105_NO_PHY,
975 				   SJA1105_NO_PHY},
976 	.name			= "SJA1110D",
977 };
978