1 // SPDX-License-Identifier: BSD-3-Clause 2 /* Copyright (c) 2016-2018, NXP Semiconductors 3 * Copyright (c) 2018, Sensor-Technik Wiedemann GmbH 4 * Copyright (c) 2018-2019, Vladimir Oltean <olteanv@gmail.com> 5 */ 6 #include <linux/spi/spi.h> 7 #include <linux/packing.h> 8 #include "sja1105.h" 9 10 struct sja1105_chunk { 11 u8 *buf; 12 size_t len; 13 u64 reg_addr; 14 }; 15 16 static void 17 sja1105_spi_message_pack(void *buf, const struct sja1105_spi_message *msg) 18 { 19 const int size = SJA1105_SIZE_SPI_MSG_HEADER; 20 21 memset(buf, 0, size); 22 23 sja1105_pack(buf, &msg->access, 31, 31, size); 24 sja1105_pack(buf, &msg->read_count, 30, 25, size); 25 sja1105_pack(buf, &msg->address, 24, 4, size); 26 } 27 28 /* If @rw is: 29 * - SPI_WRITE: creates and sends an SPI write message at absolute 30 * address reg_addr, taking @len bytes from *buf 31 * - SPI_READ: creates and sends an SPI read message from absolute 32 * address reg_addr, writing @len bytes into *buf 33 */ 34 static int sja1105_xfer(const struct sja1105_private *priv, 35 sja1105_spi_rw_mode_t rw, u64 reg_addr, u8 *buf, 36 size_t len, struct ptp_system_timestamp *ptp_sts) 37 { 38 u8 hdr_buf[SJA1105_SIZE_SPI_MSG_HEADER] = {0}; 39 struct spi_device *spi = priv->spidev; 40 struct spi_transfer xfers[2] = {0}; 41 struct spi_transfer *chunk_xfer; 42 struct spi_transfer *hdr_xfer; 43 struct sja1105_chunk chunk; 44 int num_chunks; 45 int rc, i = 0; 46 47 num_chunks = DIV_ROUND_UP(len, priv->max_xfer_len); 48 49 chunk.reg_addr = reg_addr; 50 chunk.buf = buf; 51 chunk.len = min_t(size_t, len, priv->max_xfer_len); 52 53 hdr_xfer = &xfers[0]; 54 chunk_xfer = &xfers[1]; 55 56 for (i = 0; i < num_chunks; i++) { 57 struct spi_transfer *ptp_sts_xfer; 58 struct sja1105_spi_message msg; 59 60 /* Populate the transfer's header buffer */ 61 msg.address = chunk.reg_addr; 62 msg.access = rw; 63 if (rw == SPI_READ) 64 msg.read_count = chunk.len / 4; 65 else 66 /* Ignored */ 67 msg.read_count = 0; 68 sja1105_spi_message_pack(hdr_buf, &msg); 69 hdr_xfer->tx_buf = hdr_buf; 70 hdr_xfer->len = SJA1105_SIZE_SPI_MSG_HEADER; 71 72 /* Populate the transfer's data buffer */ 73 if (rw == SPI_READ) 74 chunk_xfer->rx_buf = chunk.buf; 75 else 76 chunk_xfer->tx_buf = chunk.buf; 77 chunk_xfer->len = chunk.len; 78 79 /* Request timestamping for the transfer. Instead of letting 80 * callers specify which byte they want to timestamp, we can 81 * make certain assumptions: 82 * - A read operation will request a software timestamp when 83 * what's being read is the PTP time. That is snapshotted by 84 * the switch hardware at the end of the command portion 85 * (hdr_xfer). 86 * - A write operation will request a software timestamp on 87 * actions that modify the PTP time. Taking clock stepping as 88 * an example, the switch writes the PTP time at the end of 89 * the data portion (chunk_xfer). 90 */ 91 if (rw == SPI_READ) 92 ptp_sts_xfer = hdr_xfer; 93 else 94 ptp_sts_xfer = chunk_xfer; 95 ptp_sts_xfer->ptp_sts_word_pre = ptp_sts_xfer->len - 1; 96 ptp_sts_xfer->ptp_sts_word_post = ptp_sts_xfer->len - 1; 97 ptp_sts_xfer->ptp_sts = ptp_sts; 98 99 /* Calculate next chunk */ 100 chunk.buf += chunk.len; 101 chunk.reg_addr += chunk.len / 4; 102 chunk.len = min_t(size_t, (ptrdiff_t)(buf + len - chunk.buf), 103 priv->max_xfer_len); 104 105 rc = spi_sync_transfer(spi, xfers, 2); 106 if (rc < 0) { 107 dev_err(&spi->dev, "SPI transfer failed: %d\n", rc); 108 return rc; 109 } 110 } 111 112 return 0; 113 } 114 115 int sja1105_xfer_buf(const struct sja1105_private *priv, 116 sja1105_spi_rw_mode_t rw, u64 reg_addr, 117 u8 *buf, size_t len) 118 { 119 return sja1105_xfer(priv, rw, reg_addr, buf, len, NULL); 120 } 121 122 /* If @rw is: 123 * - SPI_WRITE: creates and sends an SPI write message at absolute 124 * address reg_addr 125 * - SPI_READ: creates and sends an SPI read message from absolute 126 * address reg_addr 127 * 128 * The u64 *value is unpacked, meaning that it's stored in the native 129 * CPU endianness and directly usable by software running on the core. 130 */ 131 int sja1105_xfer_u64(const struct sja1105_private *priv, 132 sja1105_spi_rw_mode_t rw, u64 reg_addr, u64 *value, 133 struct ptp_system_timestamp *ptp_sts) 134 { 135 u8 packed_buf[8]; 136 int rc; 137 138 if (rw == SPI_WRITE) 139 sja1105_pack(packed_buf, value, 63, 0, 8); 140 141 rc = sja1105_xfer(priv, rw, reg_addr, packed_buf, 8, ptp_sts); 142 143 if (rw == SPI_READ) 144 sja1105_unpack(packed_buf, value, 63, 0, 8); 145 146 return rc; 147 } 148 149 /* Same as above, but transfers only a 4 byte word */ 150 int sja1105_xfer_u32(const struct sja1105_private *priv, 151 sja1105_spi_rw_mode_t rw, u64 reg_addr, u32 *value, 152 struct ptp_system_timestamp *ptp_sts) 153 { 154 u8 packed_buf[4]; 155 u64 tmp; 156 int rc; 157 158 if (rw == SPI_WRITE) { 159 /* The packing API only supports u64 as CPU word size, 160 * so we need to convert. 161 */ 162 tmp = *value; 163 sja1105_pack(packed_buf, &tmp, 31, 0, 4); 164 } 165 166 rc = sja1105_xfer(priv, rw, reg_addr, packed_buf, 4, ptp_sts); 167 168 if (rw == SPI_READ) { 169 sja1105_unpack(packed_buf, &tmp, 31, 0, 4); 170 *value = tmp; 171 } 172 173 return rc; 174 } 175 176 static int sja1105et_reset_cmd(struct dsa_switch *ds) 177 { 178 struct sja1105_private *priv = ds->priv; 179 const struct sja1105_regs *regs = priv->info->regs; 180 u32 cold_reset = BIT(3); 181 182 /* Cold reset */ 183 return sja1105_xfer_u32(priv, SPI_WRITE, regs->rgu, &cold_reset, NULL); 184 } 185 186 static int sja1105pqrs_reset_cmd(struct dsa_switch *ds) 187 { 188 struct sja1105_private *priv = ds->priv; 189 const struct sja1105_regs *regs = priv->info->regs; 190 u32 cold_reset = BIT(2); 191 192 /* Cold reset */ 193 return sja1105_xfer_u32(priv, SPI_WRITE, regs->rgu, &cold_reset, NULL); 194 } 195 196 static int sja1110_reset_cmd(struct dsa_switch *ds) 197 { 198 struct sja1105_private *priv = ds->priv; 199 const struct sja1105_regs *regs = priv->info->regs; 200 u32 switch_reset = BIT(20); 201 202 /* Only reset the switch core. 203 * A full cold reset would re-enable the BASE_MCSS_CLOCK PLL which 204 * would turn on the microcontroller, potentially letting it execute 205 * code which could interfere with our configuration. 206 */ 207 return sja1105_xfer_u32(priv, SPI_WRITE, regs->rgu, &switch_reset, NULL); 208 } 209 210 int sja1105_inhibit_tx(const struct sja1105_private *priv, 211 unsigned long port_bitmap, bool tx_inhibited) 212 { 213 const struct sja1105_regs *regs = priv->info->regs; 214 u32 inhibit_cmd; 215 int rc; 216 217 rc = sja1105_xfer_u32(priv, SPI_READ, regs->port_control, 218 &inhibit_cmd, NULL); 219 if (rc < 0) 220 return rc; 221 222 if (tx_inhibited) 223 inhibit_cmd |= port_bitmap; 224 else 225 inhibit_cmd &= ~port_bitmap; 226 227 return sja1105_xfer_u32(priv, SPI_WRITE, regs->port_control, 228 &inhibit_cmd, NULL); 229 } 230 231 struct sja1105_status { 232 u64 configs; 233 u64 crcchkl; 234 u64 ids; 235 u64 crcchkg; 236 }; 237 238 /* This is not reading the entire General Status area, which is also 239 * divergent between E/T and P/Q/R/S, but only the relevant bits for 240 * ensuring that the static config upload procedure was successful. 241 */ 242 static void sja1105_status_unpack(void *buf, struct sja1105_status *status) 243 { 244 /* So that addition translates to 4 bytes */ 245 u32 *p = buf; 246 247 /* device_id is missing from the buffer, but we don't 248 * want to diverge from the manual definition of the 249 * register addresses, so we'll back off one step with 250 * the register pointer, and never access p[0]. 251 */ 252 p--; 253 sja1105_unpack(p + 0x1, &status->configs, 31, 31, 4); 254 sja1105_unpack(p + 0x1, &status->crcchkl, 30, 30, 4); 255 sja1105_unpack(p + 0x1, &status->ids, 29, 29, 4); 256 sja1105_unpack(p + 0x1, &status->crcchkg, 28, 28, 4); 257 } 258 259 static int sja1105_status_get(struct sja1105_private *priv, 260 struct sja1105_status *status) 261 { 262 const struct sja1105_regs *regs = priv->info->regs; 263 u8 packed_buf[4]; 264 int rc; 265 266 rc = sja1105_xfer_buf(priv, SPI_READ, regs->status, packed_buf, 4); 267 if (rc < 0) 268 return rc; 269 270 sja1105_status_unpack(packed_buf, status); 271 272 return 0; 273 } 274 275 /* Not const because unpacking priv->static_config into buffers and preparing 276 * for upload requires the recalculation of table CRCs and updating the 277 * structures with these. 278 */ 279 int static_config_buf_prepare_for_upload(struct sja1105_private *priv, 280 void *config_buf, int buf_len) 281 { 282 struct sja1105_static_config *config = &priv->static_config; 283 struct sja1105_table_header final_header; 284 sja1105_config_valid_t valid; 285 char *final_header_ptr; 286 int crc_len; 287 288 valid = sja1105_static_config_check_valid(config, 289 priv->info->max_frame_mem); 290 if (valid != SJA1105_CONFIG_OK) { 291 dev_err(&priv->spidev->dev, 292 sja1105_static_config_error_msg[valid]); 293 return -EINVAL; 294 } 295 296 /* Write Device ID and config tables to config_buf */ 297 sja1105_static_config_pack(config_buf, config); 298 /* Recalculate CRC of the last header (right now 0xDEADBEEF). 299 * Don't include the CRC field itself. 300 */ 301 crc_len = buf_len - 4; 302 /* Read the whole table header */ 303 final_header_ptr = config_buf + buf_len - SJA1105_SIZE_TABLE_HEADER; 304 sja1105_table_header_packing(final_header_ptr, &final_header, UNPACK); 305 /* Modify */ 306 final_header.crc = sja1105_crc32(config_buf, crc_len); 307 /* Rewrite */ 308 sja1105_table_header_packing(final_header_ptr, &final_header, PACK); 309 310 return 0; 311 } 312 313 #define RETRIES 10 314 315 int sja1105_static_config_upload(struct sja1105_private *priv) 316 { 317 struct sja1105_static_config *config = &priv->static_config; 318 const struct sja1105_regs *regs = priv->info->regs; 319 struct device *dev = &priv->spidev->dev; 320 struct dsa_switch *ds = priv->ds; 321 struct sja1105_status status; 322 int rc, retries = RETRIES; 323 u8 *config_buf; 324 int buf_len; 325 326 buf_len = sja1105_static_config_get_length(config); 327 config_buf = kcalloc(buf_len, sizeof(char), GFP_KERNEL); 328 if (!config_buf) 329 return -ENOMEM; 330 331 rc = static_config_buf_prepare_for_upload(priv, config_buf, buf_len); 332 if (rc < 0) { 333 dev_err(dev, "Invalid config, cannot upload\n"); 334 rc = -EINVAL; 335 goto out; 336 } 337 /* Prevent PHY jabbering during switch reset by inhibiting 338 * Tx on all ports and waiting for current packet to drain. 339 * Otherwise, the PHY will see an unterminated Ethernet packet. 340 */ 341 rc = sja1105_inhibit_tx(priv, GENMASK_ULL(ds->num_ports - 1, 0), true); 342 if (rc < 0) { 343 dev_err(dev, "Failed to inhibit Tx on ports\n"); 344 rc = -ENXIO; 345 goto out; 346 } 347 /* Wait for an eventual egress packet to finish transmission 348 * (reach IFG). It is guaranteed that a second one will not 349 * follow, and that switch cold reset is thus safe 350 */ 351 usleep_range(500, 1000); 352 do { 353 /* Put the SJA1105 in programming mode */ 354 rc = priv->info->reset_cmd(priv->ds); 355 if (rc < 0) { 356 dev_err(dev, "Failed to reset switch, retrying...\n"); 357 continue; 358 } 359 /* Wait for the switch to come out of reset */ 360 usleep_range(1000, 5000); 361 /* Upload the static config to the device */ 362 rc = sja1105_xfer_buf(priv, SPI_WRITE, regs->config, 363 config_buf, buf_len); 364 if (rc < 0) { 365 dev_err(dev, "Failed to upload config, retrying...\n"); 366 continue; 367 } 368 /* Check that SJA1105 responded well to the config upload */ 369 rc = sja1105_status_get(priv, &status); 370 if (rc < 0) 371 continue; 372 373 if (status.ids == 1) { 374 dev_err(dev, "Mismatch between hardware and static config " 375 "device id. Wrote 0x%llx, wants 0x%llx\n", 376 config->device_id, priv->info->device_id); 377 continue; 378 } 379 if (status.crcchkl == 1) { 380 dev_err(dev, "Switch reported invalid local CRC on " 381 "the uploaded config, retrying...\n"); 382 continue; 383 } 384 if (status.crcchkg == 1) { 385 dev_err(dev, "Switch reported invalid global CRC on " 386 "the uploaded config, retrying...\n"); 387 continue; 388 } 389 if (status.configs == 0) { 390 dev_err(dev, "Switch reported that configuration is " 391 "invalid, retrying...\n"); 392 continue; 393 } 394 /* Success! */ 395 break; 396 } while (--retries); 397 398 if (!retries) { 399 rc = -EIO; 400 dev_err(dev, "Failed to upload config to device, giving up\n"); 401 goto out; 402 } else if (retries != RETRIES) { 403 dev_info(dev, "Succeeded after %d tried\n", RETRIES - retries); 404 } 405 406 out: 407 kfree(config_buf); 408 return rc; 409 } 410 411 static const struct sja1105_regs sja1105et_regs = { 412 .device_id = 0x0, 413 .prod_id = 0x100BC3, 414 .status = 0x1, 415 .port_control = 0x11, 416 .vl_status = 0x10000, 417 .config = 0x020000, 418 .rgu = 0x100440, 419 /* UM10944.pdf, Table 86, ACU Register overview */ 420 .pad_mii_tx = {0x100800, 0x100802, 0x100804, 0x100806, 0x100808}, 421 .pad_mii_rx = {0x100801, 0x100803, 0x100805, 0x100807, 0x100809}, 422 .rmii_pll1 = 0x10000A, 423 .cgu_idiv = {0x10000B, 0x10000C, 0x10000D, 0x10000E, 0x10000F}, 424 .stats[MAC] = {0x200, 0x202, 0x204, 0x206, 0x208}, 425 .stats[HL1] = {0x400, 0x410, 0x420, 0x430, 0x440}, 426 .stats[HL2] = {0x600, 0x610, 0x620, 0x630, 0x640}, 427 /* UM10944.pdf, Table 78, CGU Register overview */ 428 .mii_tx_clk = {0x100013, 0x10001A, 0x100021, 0x100028, 0x10002F}, 429 .mii_rx_clk = {0x100014, 0x10001B, 0x100022, 0x100029, 0x100030}, 430 .mii_ext_tx_clk = {0x100018, 0x10001F, 0x100026, 0x10002D, 0x100034}, 431 .mii_ext_rx_clk = {0x100019, 0x100020, 0x100027, 0x10002E, 0x100035}, 432 .rgmii_tx_clk = {0x100016, 0x10001D, 0x100024, 0x10002B, 0x100032}, 433 .rmii_ref_clk = {0x100015, 0x10001C, 0x100023, 0x10002A, 0x100031}, 434 .rmii_ext_tx_clk = {0x100018, 0x10001F, 0x100026, 0x10002D, 0x100034}, 435 .ptpegr_ts = {0xC0, 0xC2, 0xC4, 0xC6, 0xC8}, 436 .ptpschtm = 0x12, /* Spans 0x12 to 0x13 */ 437 .ptppinst = 0x14, 438 .ptppindur = 0x16, 439 .ptp_control = 0x17, 440 .ptpclkval = 0x18, /* Spans 0x18 to 0x19 */ 441 .ptpclkrate = 0x1A, 442 .ptpclkcorp = 0x1D, 443 .mdio_100base_tx = SJA1105_RSV_ADDR, 444 .mdio_100base_t1 = SJA1105_RSV_ADDR, 445 }; 446 447 static const struct sja1105_regs sja1105pqrs_regs = { 448 .device_id = 0x0, 449 .prod_id = 0x100BC3, 450 .status = 0x1, 451 .port_control = 0x12, 452 .vl_status = 0x10000, 453 .config = 0x020000, 454 .rgu = 0x100440, 455 /* UM10944.pdf, Table 86, ACU Register overview */ 456 .pad_mii_tx = {0x100800, 0x100802, 0x100804, 0x100806, 0x100808}, 457 .pad_mii_rx = {0x100801, 0x100803, 0x100805, 0x100807, 0x100809}, 458 .pad_mii_id = {0x100810, 0x100811, 0x100812, 0x100813, 0x100814}, 459 .rmii_pll1 = 0x10000A, 460 .cgu_idiv = {0x10000B, 0x10000C, 0x10000D, 0x10000E, 0x10000F}, 461 .stats[MAC] = {0x200, 0x202, 0x204, 0x206, 0x208}, 462 .stats[HL1] = {0x400, 0x410, 0x420, 0x430, 0x440}, 463 .stats[HL2] = {0x600, 0x610, 0x620, 0x630, 0x640}, 464 .stats[ETHER] = {0x1400, 0x1418, 0x1430, 0x1448, 0x1460}, 465 /* UM11040.pdf, Table 114 */ 466 .mii_tx_clk = {0x100013, 0x100019, 0x10001F, 0x100025, 0x10002B}, 467 .mii_rx_clk = {0x100014, 0x10001A, 0x100020, 0x100026, 0x10002C}, 468 .mii_ext_tx_clk = {0x100017, 0x10001D, 0x100023, 0x100029, 0x10002F}, 469 .mii_ext_rx_clk = {0x100018, 0x10001E, 0x100024, 0x10002A, 0x100030}, 470 .rgmii_tx_clk = {0x100016, 0x10001C, 0x100022, 0x100028, 0x10002E}, 471 .rmii_ref_clk = {0x100015, 0x10001B, 0x100021, 0x100027, 0x10002D}, 472 .rmii_ext_tx_clk = {0x100017, 0x10001D, 0x100023, 0x100029, 0x10002F}, 473 .ptpegr_ts = {0xC0, 0xC4, 0xC8, 0xCC, 0xD0}, 474 .ptpschtm = 0x13, /* Spans 0x13 to 0x14 */ 475 .ptppinst = 0x15, 476 .ptppindur = 0x17, 477 .ptp_control = 0x18, 478 .ptpclkval = 0x19, 479 .ptpclkrate = 0x1B, 480 .ptpclkcorp = 0x1E, 481 .ptpsyncts = 0x1F, 482 .mdio_100base_tx = SJA1105_RSV_ADDR, 483 .mdio_100base_t1 = SJA1105_RSV_ADDR, 484 }; 485 486 static const struct sja1105_regs sja1110_regs = { 487 .device_id = SJA1110_SPI_ADDR(0x0), 488 .prod_id = SJA1110_ACU_ADDR(0xf00), 489 .status = SJA1110_SPI_ADDR(0x4), 490 .port_control = SJA1110_SPI_ADDR(0x50), /* actually INHIB_TX */ 491 .vl_status = 0x10000, 492 .config = 0x020000, 493 .rgu = SJA1110_RGU_ADDR(0x100), /* Reset Control Register 0 */ 494 /* Ports 2 and 3 are capable of xMII, but there isn't anything to 495 * configure in the CGU/ACU for them. 496 */ 497 .pad_mii_tx = {SJA1105_RSV_ADDR, SJA1105_RSV_ADDR, 498 SJA1105_RSV_ADDR, SJA1105_RSV_ADDR, 499 SJA1105_RSV_ADDR, SJA1105_RSV_ADDR, 500 SJA1105_RSV_ADDR, SJA1105_RSV_ADDR, 501 SJA1105_RSV_ADDR, SJA1105_RSV_ADDR, 502 SJA1105_RSV_ADDR}, 503 .pad_mii_rx = {SJA1105_RSV_ADDR, SJA1105_RSV_ADDR, 504 SJA1105_RSV_ADDR, SJA1105_RSV_ADDR, 505 SJA1105_RSV_ADDR, SJA1105_RSV_ADDR, 506 SJA1105_RSV_ADDR, SJA1105_RSV_ADDR, 507 SJA1105_RSV_ADDR, SJA1105_RSV_ADDR, 508 SJA1105_RSV_ADDR}, 509 .pad_mii_id = {SJA1105_RSV_ADDR, SJA1105_RSV_ADDR, 510 SJA1110_ACU_ADDR(0x18), SJA1110_ACU_ADDR(0x28), 511 SJA1105_RSV_ADDR, SJA1105_RSV_ADDR, 512 SJA1105_RSV_ADDR, SJA1105_RSV_ADDR, 513 SJA1105_RSV_ADDR, SJA1105_RSV_ADDR, 514 SJA1105_RSV_ADDR}, 515 .rmii_pll1 = SJA1105_RSV_ADDR, 516 .cgu_idiv = {SJA1105_RSV_ADDR, SJA1105_RSV_ADDR, SJA1105_RSV_ADDR, 517 SJA1105_RSV_ADDR, SJA1105_RSV_ADDR, SJA1105_RSV_ADDR, 518 SJA1105_RSV_ADDR, SJA1105_RSV_ADDR, SJA1105_RSV_ADDR, 519 SJA1105_RSV_ADDR, SJA1105_RSV_ADDR}, 520 .stats[MAC] = {0x200, 0x202, 0x204, 0x206, 0x208, 0x20a, 521 0x20c, 0x20e, 0x210, 0x212, 0x214}, 522 .stats[HL1] = {0x400, 0x410, 0x420, 0x430, 0x440, 0x450, 523 0x460, 0x470, 0x480, 0x490, 0x4a0}, 524 .stats[HL2] = {0x600, 0x610, 0x620, 0x630, 0x640, 0x650, 525 0x660, 0x670, 0x680, 0x690, 0x6a0}, 526 .stats[ETHER] = {0x1400, 0x1418, 0x1430, 0x1448, 0x1460, 0x1478, 527 0x1490, 0x14a8, 0x14c0, 0x14d8, 0x14f0}, 528 .mii_tx_clk = {SJA1105_RSV_ADDR, SJA1105_RSV_ADDR, SJA1105_RSV_ADDR, 529 SJA1105_RSV_ADDR, SJA1105_RSV_ADDR, SJA1105_RSV_ADDR, 530 SJA1105_RSV_ADDR, SJA1105_RSV_ADDR, SJA1105_RSV_ADDR, 531 SJA1105_RSV_ADDR, SJA1105_RSV_ADDR}, 532 .mii_rx_clk = {SJA1105_RSV_ADDR, SJA1105_RSV_ADDR, SJA1105_RSV_ADDR, 533 SJA1105_RSV_ADDR, SJA1105_RSV_ADDR, SJA1105_RSV_ADDR, 534 SJA1105_RSV_ADDR, SJA1105_RSV_ADDR, SJA1105_RSV_ADDR, 535 SJA1105_RSV_ADDR, SJA1105_RSV_ADDR}, 536 .mii_ext_tx_clk = {SJA1105_RSV_ADDR, SJA1105_RSV_ADDR, SJA1105_RSV_ADDR, 537 SJA1105_RSV_ADDR, SJA1105_RSV_ADDR, SJA1105_RSV_ADDR, 538 SJA1105_RSV_ADDR, SJA1105_RSV_ADDR, SJA1105_RSV_ADDR, 539 SJA1105_RSV_ADDR, SJA1105_RSV_ADDR}, 540 .mii_ext_rx_clk = {SJA1105_RSV_ADDR, SJA1105_RSV_ADDR, SJA1105_RSV_ADDR, 541 SJA1105_RSV_ADDR, SJA1105_RSV_ADDR, SJA1105_RSV_ADDR, 542 SJA1105_RSV_ADDR, SJA1105_RSV_ADDR, SJA1105_RSV_ADDR, 543 SJA1105_RSV_ADDR, SJA1105_RSV_ADDR}, 544 .rgmii_tx_clk = {SJA1105_RSV_ADDR, SJA1105_RSV_ADDR, SJA1105_RSV_ADDR, 545 SJA1105_RSV_ADDR, SJA1105_RSV_ADDR, SJA1105_RSV_ADDR, 546 SJA1105_RSV_ADDR, SJA1105_RSV_ADDR, SJA1105_RSV_ADDR, 547 SJA1105_RSV_ADDR, SJA1105_RSV_ADDR}, 548 .rmii_ref_clk = {SJA1105_RSV_ADDR, SJA1105_RSV_ADDR, SJA1105_RSV_ADDR, 549 SJA1105_RSV_ADDR, SJA1105_RSV_ADDR, SJA1105_RSV_ADDR, 550 SJA1105_RSV_ADDR, SJA1105_RSV_ADDR, SJA1105_RSV_ADDR, 551 SJA1105_RSV_ADDR, SJA1105_RSV_ADDR}, 552 .rmii_ext_tx_clk = {SJA1105_RSV_ADDR, SJA1105_RSV_ADDR, 553 SJA1105_RSV_ADDR, SJA1105_RSV_ADDR, 554 SJA1105_RSV_ADDR, SJA1105_RSV_ADDR, 555 SJA1105_RSV_ADDR, SJA1105_RSV_ADDR, 556 SJA1105_RSV_ADDR, SJA1105_RSV_ADDR, 557 SJA1105_RSV_ADDR}, 558 .ptpschtm = SJA1110_SPI_ADDR(0x54), 559 .ptppinst = SJA1110_SPI_ADDR(0x5c), 560 .ptppindur = SJA1110_SPI_ADDR(0x64), 561 .ptp_control = SJA1110_SPI_ADDR(0x68), 562 .ptpclkval = SJA1110_SPI_ADDR(0x6c), 563 .ptpclkrate = SJA1110_SPI_ADDR(0x74), 564 .ptpclkcorp = SJA1110_SPI_ADDR(0x80), 565 .ptpsyncts = SJA1110_SPI_ADDR(0x84), 566 .mdio_100base_tx = 0x1c2400, 567 .mdio_100base_t1 = 0x1c1000, 568 .pcs_base = {SJA1105_RSV_ADDR, 0x1c1400, 0x1c1800, 0x1c1c00, 0x1c2000, 569 SJA1105_RSV_ADDR, SJA1105_RSV_ADDR, SJA1105_RSV_ADDR, 570 SJA1105_RSV_ADDR, SJA1105_RSV_ADDR, SJA1105_RSV_ADDR}, 571 }; 572 573 const struct sja1105_info sja1105e_info = { 574 .device_id = SJA1105E_DEVICE_ID, 575 .part_no = SJA1105ET_PART_NO, 576 .static_ops = sja1105e_table_ops, 577 .dyn_ops = sja1105et_dyn_ops, 578 .tag_proto = DSA_TAG_PROTO_SJA1105, 579 .can_limit_mcast_flood = false, 580 .ptp_ts_bits = 24, 581 .ptpegr_ts_bytes = 4, 582 .max_frame_mem = SJA1105_MAX_FRAME_MEMORY, 583 .num_ports = SJA1105_NUM_PORTS, 584 .num_cbs_shapers = SJA1105ET_MAX_CBS_COUNT, 585 .reset_cmd = sja1105et_reset_cmd, 586 .fdb_add_cmd = sja1105et_fdb_add, 587 .fdb_del_cmd = sja1105et_fdb_del, 588 .ptp_cmd_packing = sja1105et_ptp_cmd_packing, 589 .rxtstamp = sja1105_rxtstamp, 590 .clocking_setup = sja1105_clocking_setup, 591 .regs = &sja1105et_regs, 592 .port_speed = { 593 [SJA1105_SPEED_AUTO] = 0, 594 [SJA1105_SPEED_10MBPS] = 3, 595 [SJA1105_SPEED_100MBPS] = 2, 596 [SJA1105_SPEED_1000MBPS] = 1, 597 [SJA1105_SPEED_2500MBPS] = 0, /* Not supported */ 598 }, 599 .supports_mii = {true, true, true, true, true}, 600 .supports_rmii = {true, true, true, true, true}, 601 .supports_rgmii = {true, true, true, true, true}, 602 .name = "SJA1105E", 603 }; 604 605 const struct sja1105_info sja1105t_info = { 606 .device_id = SJA1105T_DEVICE_ID, 607 .part_no = SJA1105ET_PART_NO, 608 .static_ops = sja1105t_table_ops, 609 .dyn_ops = sja1105et_dyn_ops, 610 .tag_proto = DSA_TAG_PROTO_SJA1105, 611 .can_limit_mcast_flood = false, 612 .ptp_ts_bits = 24, 613 .ptpegr_ts_bytes = 4, 614 .max_frame_mem = SJA1105_MAX_FRAME_MEMORY, 615 .num_ports = SJA1105_NUM_PORTS, 616 .num_cbs_shapers = SJA1105ET_MAX_CBS_COUNT, 617 .reset_cmd = sja1105et_reset_cmd, 618 .fdb_add_cmd = sja1105et_fdb_add, 619 .fdb_del_cmd = sja1105et_fdb_del, 620 .ptp_cmd_packing = sja1105et_ptp_cmd_packing, 621 .rxtstamp = sja1105_rxtstamp, 622 .clocking_setup = sja1105_clocking_setup, 623 .regs = &sja1105et_regs, 624 .port_speed = { 625 [SJA1105_SPEED_AUTO] = 0, 626 [SJA1105_SPEED_10MBPS] = 3, 627 [SJA1105_SPEED_100MBPS] = 2, 628 [SJA1105_SPEED_1000MBPS] = 1, 629 [SJA1105_SPEED_2500MBPS] = 0, /* Not supported */ 630 }, 631 .supports_mii = {true, true, true, true, true}, 632 .supports_rmii = {true, true, true, true, true}, 633 .supports_rgmii = {true, true, true, true, true}, 634 .name = "SJA1105T", 635 }; 636 637 const struct sja1105_info sja1105p_info = { 638 .device_id = SJA1105PR_DEVICE_ID, 639 .part_no = SJA1105P_PART_NO, 640 .static_ops = sja1105p_table_ops, 641 .dyn_ops = sja1105pqrs_dyn_ops, 642 .tag_proto = DSA_TAG_PROTO_SJA1105, 643 .can_limit_mcast_flood = true, 644 .ptp_ts_bits = 32, 645 .ptpegr_ts_bytes = 8, 646 .max_frame_mem = SJA1105_MAX_FRAME_MEMORY, 647 .num_ports = SJA1105_NUM_PORTS, 648 .num_cbs_shapers = SJA1105PQRS_MAX_CBS_COUNT, 649 .setup_rgmii_delay = sja1105pqrs_setup_rgmii_delay, 650 .reset_cmd = sja1105pqrs_reset_cmd, 651 .fdb_add_cmd = sja1105pqrs_fdb_add, 652 .fdb_del_cmd = sja1105pqrs_fdb_del, 653 .ptp_cmd_packing = sja1105pqrs_ptp_cmd_packing, 654 .rxtstamp = sja1105_rxtstamp, 655 .clocking_setup = sja1105_clocking_setup, 656 .regs = &sja1105pqrs_regs, 657 .port_speed = { 658 [SJA1105_SPEED_AUTO] = 0, 659 [SJA1105_SPEED_10MBPS] = 3, 660 [SJA1105_SPEED_100MBPS] = 2, 661 [SJA1105_SPEED_1000MBPS] = 1, 662 [SJA1105_SPEED_2500MBPS] = 0, /* Not supported */ 663 }, 664 .supports_mii = {true, true, true, true, true}, 665 .supports_rmii = {true, true, true, true, true}, 666 .supports_rgmii = {true, true, true, true, true}, 667 .name = "SJA1105P", 668 }; 669 670 const struct sja1105_info sja1105q_info = { 671 .device_id = SJA1105QS_DEVICE_ID, 672 .part_no = SJA1105Q_PART_NO, 673 .static_ops = sja1105q_table_ops, 674 .dyn_ops = sja1105pqrs_dyn_ops, 675 .tag_proto = DSA_TAG_PROTO_SJA1105, 676 .can_limit_mcast_flood = true, 677 .ptp_ts_bits = 32, 678 .ptpegr_ts_bytes = 8, 679 .max_frame_mem = SJA1105_MAX_FRAME_MEMORY, 680 .num_ports = SJA1105_NUM_PORTS, 681 .num_cbs_shapers = SJA1105PQRS_MAX_CBS_COUNT, 682 .setup_rgmii_delay = sja1105pqrs_setup_rgmii_delay, 683 .reset_cmd = sja1105pqrs_reset_cmd, 684 .fdb_add_cmd = sja1105pqrs_fdb_add, 685 .fdb_del_cmd = sja1105pqrs_fdb_del, 686 .ptp_cmd_packing = sja1105pqrs_ptp_cmd_packing, 687 .rxtstamp = sja1105_rxtstamp, 688 .clocking_setup = sja1105_clocking_setup, 689 .regs = &sja1105pqrs_regs, 690 .port_speed = { 691 [SJA1105_SPEED_AUTO] = 0, 692 [SJA1105_SPEED_10MBPS] = 3, 693 [SJA1105_SPEED_100MBPS] = 2, 694 [SJA1105_SPEED_1000MBPS] = 1, 695 [SJA1105_SPEED_2500MBPS] = 0, /* Not supported */ 696 }, 697 .supports_mii = {true, true, true, true, true}, 698 .supports_rmii = {true, true, true, true, true}, 699 .supports_rgmii = {true, true, true, true, true}, 700 .name = "SJA1105Q", 701 }; 702 703 const struct sja1105_info sja1105r_info = { 704 .device_id = SJA1105PR_DEVICE_ID, 705 .part_no = SJA1105R_PART_NO, 706 .static_ops = sja1105r_table_ops, 707 .dyn_ops = sja1105pqrs_dyn_ops, 708 .tag_proto = DSA_TAG_PROTO_SJA1105, 709 .can_limit_mcast_flood = true, 710 .ptp_ts_bits = 32, 711 .ptpegr_ts_bytes = 8, 712 .max_frame_mem = SJA1105_MAX_FRAME_MEMORY, 713 .num_ports = SJA1105_NUM_PORTS, 714 .num_cbs_shapers = SJA1105PQRS_MAX_CBS_COUNT, 715 .setup_rgmii_delay = sja1105pqrs_setup_rgmii_delay, 716 .reset_cmd = sja1105pqrs_reset_cmd, 717 .fdb_add_cmd = sja1105pqrs_fdb_add, 718 .fdb_del_cmd = sja1105pqrs_fdb_del, 719 .ptp_cmd_packing = sja1105pqrs_ptp_cmd_packing, 720 .rxtstamp = sja1105_rxtstamp, 721 .clocking_setup = sja1105_clocking_setup, 722 .pcs_mdio_read = sja1105_pcs_mdio_read, 723 .pcs_mdio_write = sja1105_pcs_mdio_write, 724 .regs = &sja1105pqrs_regs, 725 .port_speed = { 726 [SJA1105_SPEED_AUTO] = 0, 727 [SJA1105_SPEED_10MBPS] = 3, 728 [SJA1105_SPEED_100MBPS] = 2, 729 [SJA1105_SPEED_1000MBPS] = 1, 730 [SJA1105_SPEED_2500MBPS] = 0, /* Not supported */ 731 }, 732 .supports_mii = {true, true, true, true, true}, 733 .supports_rmii = {true, true, true, true, true}, 734 .supports_rgmii = {true, true, true, true, true}, 735 .supports_sgmii = {false, false, false, false, true}, 736 .name = "SJA1105R", 737 }; 738 739 const struct sja1105_info sja1105s_info = { 740 .device_id = SJA1105QS_DEVICE_ID, 741 .part_no = SJA1105S_PART_NO, 742 .static_ops = sja1105s_table_ops, 743 .dyn_ops = sja1105pqrs_dyn_ops, 744 .regs = &sja1105pqrs_regs, 745 .tag_proto = DSA_TAG_PROTO_SJA1105, 746 .can_limit_mcast_flood = true, 747 .ptp_ts_bits = 32, 748 .ptpegr_ts_bytes = 8, 749 .max_frame_mem = SJA1105_MAX_FRAME_MEMORY, 750 .num_ports = SJA1105_NUM_PORTS, 751 .num_cbs_shapers = SJA1105PQRS_MAX_CBS_COUNT, 752 .setup_rgmii_delay = sja1105pqrs_setup_rgmii_delay, 753 .reset_cmd = sja1105pqrs_reset_cmd, 754 .fdb_add_cmd = sja1105pqrs_fdb_add, 755 .fdb_del_cmd = sja1105pqrs_fdb_del, 756 .ptp_cmd_packing = sja1105pqrs_ptp_cmd_packing, 757 .rxtstamp = sja1105_rxtstamp, 758 .clocking_setup = sja1105_clocking_setup, 759 .pcs_mdio_read = sja1105_pcs_mdio_read, 760 .pcs_mdio_write = sja1105_pcs_mdio_write, 761 .port_speed = { 762 [SJA1105_SPEED_AUTO] = 0, 763 [SJA1105_SPEED_10MBPS] = 3, 764 [SJA1105_SPEED_100MBPS] = 2, 765 [SJA1105_SPEED_1000MBPS] = 1, 766 [SJA1105_SPEED_2500MBPS] = 0, /* Not supported */ 767 }, 768 .supports_mii = {true, true, true, true, true}, 769 .supports_rmii = {true, true, true, true, true}, 770 .supports_rgmii = {true, true, true, true, true}, 771 .supports_sgmii = {false, false, false, false, true}, 772 .name = "SJA1105S", 773 }; 774 775 const struct sja1105_info sja1110a_info = { 776 .device_id = SJA1110_DEVICE_ID, 777 .part_no = SJA1110A_PART_NO, 778 .static_ops = sja1110_table_ops, 779 .dyn_ops = sja1110_dyn_ops, 780 .regs = &sja1110_regs, 781 .tag_proto = DSA_TAG_PROTO_SJA1110, 782 .can_limit_mcast_flood = true, 783 .multiple_cascade_ports = true, 784 .ptp_ts_bits = 32, 785 .ptpegr_ts_bytes = 8, 786 .max_frame_mem = SJA1110_MAX_FRAME_MEMORY, 787 .num_ports = SJA1110_NUM_PORTS, 788 .num_cbs_shapers = SJA1110_MAX_CBS_COUNT, 789 .setup_rgmii_delay = sja1110_setup_rgmii_delay, 790 .reset_cmd = sja1110_reset_cmd, 791 .fdb_add_cmd = sja1105pqrs_fdb_add, 792 .fdb_del_cmd = sja1105pqrs_fdb_del, 793 .ptp_cmd_packing = sja1105pqrs_ptp_cmd_packing, 794 .rxtstamp = sja1110_rxtstamp, 795 .txtstamp = sja1110_txtstamp, 796 .disable_microcontroller = sja1110_disable_microcontroller, 797 .pcs_mdio_read = sja1110_pcs_mdio_read, 798 .pcs_mdio_write = sja1110_pcs_mdio_write, 799 .port_speed = { 800 [SJA1105_SPEED_AUTO] = 0, 801 [SJA1105_SPEED_10MBPS] = 4, 802 [SJA1105_SPEED_100MBPS] = 3, 803 [SJA1105_SPEED_1000MBPS] = 2, 804 [SJA1105_SPEED_2500MBPS] = 1, 805 }, 806 .supports_mii = {true, true, true, true, false, 807 true, true, true, true, true, true}, 808 .supports_rmii = {false, false, true, true, false, 809 false, false, false, false, false, false}, 810 .supports_rgmii = {false, false, true, true, false, 811 false, false, false, false, false, false}, 812 .supports_sgmii = {false, true, true, true, true, 813 false, false, false, false, false, false}, 814 .supports_2500basex = {false, false, false, true, true, 815 false, false, false, false, false, false}, 816 .internal_phy = {SJA1105_NO_PHY, SJA1105_PHY_BASE_TX, 817 SJA1105_NO_PHY, SJA1105_NO_PHY, 818 SJA1105_NO_PHY, SJA1105_PHY_BASE_T1, 819 SJA1105_PHY_BASE_T1, SJA1105_PHY_BASE_T1, 820 SJA1105_PHY_BASE_T1, SJA1105_PHY_BASE_T1, 821 SJA1105_PHY_BASE_T1}, 822 .name = "SJA1110A", 823 }; 824 825 const struct sja1105_info sja1110b_info = { 826 .device_id = SJA1110_DEVICE_ID, 827 .part_no = SJA1110B_PART_NO, 828 .static_ops = sja1110_table_ops, 829 .dyn_ops = sja1110_dyn_ops, 830 .regs = &sja1110_regs, 831 .tag_proto = DSA_TAG_PROTO_SJA1110, 832 .can_limit_mcast_flood = true, 833 .multiple_cascade_ports = true, 834 .ptp_ts_bits = 32, 835 .ptpegr_ts_bytes = 8, 836 .max_frame_mem = SJA1110_MAX_FRAME_MEMORY, 837 .num_ports = SJA1110_NUM_PORTS, 838 .num_cbs_shapers = SJA1110_MAX_CBS_COUNT, 839 .setup_rgmii_delay = sja1110_setup_rgmii_delay, 840 .reset_cmd = sja1110_reset_cmd, 841 .fdb_add_cmd = sja1105pqrs_fdb_add, 842 .fdb_del_cmd = sja1105pqrs_fdb_del, 843 .ptp_cmd_packing = sja1105pqrs_ptp_cmd_packing, 844 .rxtstamp = sja1110_rxtstamp, 845 .txtstamp = sja1110_txtstamp, 846 .disable_microcontroller = sja1110_disable_microcontroller, 847 .pcs_mdio_read = sja1110_pcs_mdio_read, 848 .pcs_mdio_write = sja1110_pcs_mdio_write, 849 .port_speed = { 850 [SJA1105_SPEED_AUTO] = 0, 851 [SJA1105_SPEED_10MBPS] = 4, 852 [SJA1105_SPEED_100MBPS] = 3, 853 [SJA1105_SPEED_1000MBPS] = 2, 854 [SJA1105_SPEED_2500MBPS] = 1, 855 }, 856 .supports_mii = {true, true, true, true, false, 857 true, true, true, true, true, false}, 858 .supports_rmii = {false, false, true, true, false, 859 false, false, false, false, false, false}, 860 .supports_rgmii = {false, false, true, true, false, 861 false, false, false, false, false, false}, 862 .supports_sgmii = {false, false, false, true, true, 863 false, false, false, false, false, false}, 864 .supports_2500basex = {false, false, false, true, true, 865 false, false, false, false, false, false}, 866 .internal_phy = {SJA1105_NO_PHY, SJA1105_PHY_BASE_TX, 867 SJA1105_NO_PHY, SJA1105_NO_PHY, 868 SJA1105_NO_PHY, SJA1105_PHY_BASE_T1, 869 SJA1105_PHY_BASE_T1, SJA1105_PHY_BASE_T1, 870 SJA1105_PHY_BASE_T1, SJA1105_PHY_BASE_T1, 871 SJA1105_NO_PHY}, 872 .name = "SJA1110B", 873 }; 874 875 const struct sja1105_info sja1110c_info = { 876 .device_id = SJA1110_DEVICE_ID, 877 .part_no = SJA1110C_PART_NO, 878 .static_ops = sja1110_table_ops, 879 .dyn_ops = sja1110_dyn_ops, 880 .regs = &sja1110_regs, 881 .tag_proto = DSA_TAG_PROTO_SJA1110, 882 .can_limit_mcast_flood = true, 883 .multiple_cascade_ports = true, 884 .ptp_ts_bits = 32, 885 .ptpegr_ts_bytes = 8, 886 .max_frame_mem = SJA1110_MAX_FRAME_MEMORY, 887 .num_ports = SJA1110_NUM_PORTS, 888 .num_cbs_shapers = SJA1110_MAX_CBS_COUNT, 889 .setup_rgmii_delay = sja1110_setup_rgmii_delay, 890 .reset_cmd = sja1110_reset_cmd, 891 .fdb_add_cmd = sja1105pqrs_fdb_add, 892 .fdb_del_cmd = sja1105pqrs_fdb_del, 893 .ptp_cmd_packing = sja1105pqrs_ptp_cmd_packing, 894 .rxtstamp = sja1110_rxtstamp, 895 .txtstamp = sja1110_txtstamp, 896 .disable_microcontroller = sja1110_disable_microcontroller, 897 .pcs_mdio_read = sja1110_pcs_mdio_read, 898 .pcs_mdio_write = sja1110_pcs_mdio_write, 899 .port_speed = { 900 [SJA1105_SPEED_AUTO] = 0, 901 [SJA1105_SPEED_10MBPS] = 4, 902 [SJA1105_SPEED_100MBPS] = 3, 903 [SJA1105_SPEED_1000MBPS] = 2, 904 [SJA1105_SPEED_2500MBPS] = 1, 905 }, 906 .supports_mii = {true, true, true, true, false, 907 true, true, true, false, false, false}, 908 .supports_rmii = {false, false, true, true, false, 909 false, false, false, false, false, false}, 910 .supports_rgmii = {false, false, true, true, false, 911 false, false, false, false, false, false}, 912 .supports_sgmii = {false, false, false, false, true, 913 false, false, false, false, false, false}, 914 .supports_2500basex = {false, false, false, false, true, 915 false, false, false, false, false, false}, 916 .internal_phy = {SJA1105_NO_PHY, SJA1105_PHY_BASE_TX, 917 SJA1105_NO_PHY, SJA1105_NO_PHY, 918 SJA1105_NO_PHY, SJA1105_PHY_BASE_T1, 919 SJA1105_PHY_BASE_T1, SJA1105_PHY_BASE_T1, 920 SJA1105_NO_PHY, SJA1105_NO_PHY, 921 SJA1105_NO_PHY}, 922 .name = "SJA1110C", 923 }; 924 925 const struct sja1105_info sja1110d_info = { 926 .device_id = SJA1110_DEVICE_ID, 927 .part_no = SJA1110D_PART_NO, 928 .static_ops = sja1110_table_ops, 929 .dyn_ops = sja1110_dyn_ops, 930 .regs = &sja1110_regs, 931 .tag_proto = DSA_TAG_PROTO_SJA1110, 932 .can_limit_mcast_flood = true, 933 .multiple_cascade_ports = true, 934 .ptp_ts_bits = 32, 935 .ptpegr_ts_bytes = 8, 936 .max_frame_mem = SJA1110_MAX_FRAME_MEMORY, 937 .num_ports = SJA1110_NUM_PORTS, 938 .num_cbs_shapers = SJA1110_MAX_CBS_COUNT, 939 .setup_rgmii_delay = sja1110_setup_rgmii_delay, 940 .reset_cmd = sja1110_reset_cmd, 941 .fdb_add_cmd = sja1105pqrs_fdb_add, 942 .fdb_del_cmd = sja1105pqrs_fdb_del, 943 .ptp_cmd_packing = sja1105pqrs_ptp_cmd_packing, 944 .rxtstamp = sja1110_rxtstamp, 945 .txtstamp = sja1110_txtstamp, 946 .disable_microcontroller = sja1110_disable_microcontroller, 947 .pcs_mdio_read = sja1110_pcs_mdio_read, 948 .pcs_mdio_write = sja1110_pcs_mdio_write, 949 .port_speed = { 950 [SJA1105_SPEED_AUTO] = 0, 951 [SJA1105_SPEED_10MBPS] = 4, 952 [SJA1105_SPEED_100MBPS] = 3, 953 [SJA1105_SPEED_1000MBPS] = 2, 954 [SJA1105_SPEED_2500MBPS] = 1, 955 }, 956 .supports_mii = {true, false, true, false, false, 957 true, true, true, false, false, false}, 958 .supports_rmii = {false, false, true, false, false, 959 false, false, false, false, false, false}, 960 .supports_rgmii = {false, false, true, false, false, 961 false, false, false, false, false, false}, 962 .supports_sgmii = {false, true, true, true, true, 963 false, false, false, false, false, false}, 964 .supports_2500basex = {false, false, false, true, true, 965 false, false, false, false, false, false}, 966 .internal_phy = {SJA1105_NO_PHY, SJA1105_NO_PHY, 967 SJA1105_NO_PHY, SJA1105_NO_PHY, 968 SJA1105_NO_PHY, SJA1105_PHY_BASE_T1, 969 SJA1105_PHY_BASE_T1, SJA1105_PHY_BASE_T1, 970 SJA1105_NO_PHY, SJA1105_NO_PHY, 971 SJA1105_NO_PHY}, 972 .name = "SJA1110D", 973 }; 974