1 // SPDX-License-Identifier: BSD-3-Clause 2 /* Copyright (c) 2016-2018, NXP Semiconductors 3 * Copyright (c) 2018, Sensor-Technik Wiedemann GmbH 4 * Copyright (c) 2018-2019, Vladimir Oltean <olteanv@gmail.com> 5 */ 6 #include <linux/spi/spi.h> 7 #include <linux/packing.h> 8 #include "sja1105.h" 9 10 #define SJA1105_SIZE_RESET_CMD 4 11 #define SJA1105_SIZE_SPI_MSG_HEADER 4 12 #define SJA1105_SIZE_SPI_MSG_MAXLEN (64 * 4) 13 14 struct sja1105_chunk { 15 u8 *buf; 16 size_t len; 17 u64 reg_addr; 18 }; 19 20 static void 21 sja1105_spi_message_pack(void *buf, const struct sja1105_spi_message *msg) 22 { 23 const int size = SJA1105_SIZE_SPI_MSG_HEADER; 24 25 memset(buf, 0, size); 26 27 sja1105_pack(buf, &msg->access, 31, 31, size); 28 sja1105_pack(buf, &msg->read_count, 30, 25, size); 29 sja1105_pack(buf, &msg->address, 24, 4, size); 30 } 31 32 #define sja1105_hdr_xfer(xfers, chunk) \ 33 ((xfers) + 2 * (chunk)) 34 #define sja1105_chunk_xfer(xfers, chunk) \ 35 ((xfers) + 2 * (chunk) + 1) 36 #define sja1105_hdr_buf(hdr_bufs, chunk) \ 37 ((hdr_bufs) + (chunk) * SJA1105_SIZE_SPI_MSG_HEADER) 38 39 /* If @rw is: 40 * - SPI_WRITE: creates and sends an SPI write message at absolute 41 * address reg_addr, taking @len bytes from *buf 42 * - SPI_READ: creates and sends an SPI read message from absolute 43 * address reg_addr, writing @len bytes into *buf 44 */ 45 static int sja1105_xfer(const struct sja1105_private *priv, 46 sja1105_spi_rw_mode_t rw, u64 reg_addr, u8 *buf, 47 size_t len, struct ptp_system_timestamp *ptp_sts) 48 { 49 struct sja1105_chunk chunk = { 50 .len = min_t(size_t, len, SJA1105_SIZE_SPI_MSG_MAXLEN), 51 .reg_addr = reg_addr, 52 .buf = buf, 53 }; 54 struct spi_device *spi = priv->spidev; 55 struct spi_transfer *xfers; 56 int num_chunks; 57 int rc, i = 0; 58 u8 *hdr_bufs; 59 60 num_chunks = DIV_ROUND_UP(len, SJA1105_SIZE_SPI_MSG_MAXLEN); 61 62 /* One transfer for each message header, one for each message 63 * payload (chunk). 64 */ 65 xfers = kcalloc(2 * num_chunks, sizeof(struct spi_transfer), 66 GFP_KERNEL); 67 if (!xfers) 68 return -ENOMEM; 69 70 /* Packed buffers for the num_chunks SPI message headers, 71 * stored as a contiguous array 72 */ 73 hdr_bufs = kcalloc(num_chunks, SJA1105_SIZE_SPI_MSG_HEADER, 74 GFP_KERNEL); 75 if (!hdr_bufs) { 76 kfree(xfers); 77 return -ENOMEM; 78 } 79 80 for (i = 0; i < num_chunks; i++) { 81 struct spi_transfer *chunk_xfer = sja1105_chunk_xfer(xfers, i); 82 struct spi_transfer *hdr_xfer = sja1105_hdr_xfer(xfers, i); 83 u8 *hdr_buf = sja1105_hdr_buf(hdr_bufs, i); 84 struct spi_transfer *ptp_sts_xfer; 85 struct sja1105_spi_message msg; 86 87 /* Populate the transfer's header buffer */ 88 msg.address = chunk.reg_addr; 89 msg.access = rw; 90 if (rw == SPI_READ) 91 msg.read_count = chunk.len / 4; 92 else 93 /* Ignored */ 94 msg.read_count = 0; 95 sja1105_spi_message_pack(hdr_buf, &msg); 96 hdr_xfer->tx_buf = hdr_buf; 97 hdr_xfer->len = SJA1105_SIZE_SPI_MSG_HEADER; 98 99 /* Populate the transfer's data buffer */ 100 if (rw == SPI_READ) 101 chunk_xfer->rx_buf = chunk.buf; 102 else 103 chunk_xfer->tx_buf = chunk.buf; 104 chunk_xfer->len = chunk.len; 105 106 /* Request timestamping for the transfer. Instead of letting 107 * callers specify which byte they want to timestamp, we can 108 * make certain assumptions: 109 * - A read operation will request a software timestamp when 110 * what's being read is the PTP time. That is snapshotted by 111 * the switch hardware at the end of the command portion 112 * (hdr_xfer). 113 * - A write operation will request a software timestamp on 114 * actions that modify the PTP time. Taking clock stepping as 115 * an example, the switch writes the PTP time at the end of 116 * the data portion (chunk_xfer). 117 */ 118 if (rw == SPI_READ) 119 ptp_sts_xfer = hdr_xfer; 120 else 121 ptp_sts_xfer = chunk_xfer; 122 ptp_sts_xfer->ptp_sts_word_pre = ptp_sts_xfer->len - 1; 123 ptp_sts_xfer->ptp_sts_word_post = ptp_sts_xfer->len - 1; 124 ptp_sts_xfer->ptp_sts = ptp_sts; 125 126 /* Calculate next chunk */ 127 chunk.buf += chunk.len; 128 chunk.reg_addr += chunk.len / 4; 129 chunk.len = min_t(size_t, (ptrdiff_t)(buf + len - chunk.buf), 130 SJA1105_SIZE_SPI_MSG_MAXLEN); 131 132 /* De-assert the chip select after each chunk. */ 133 if (chunk.len) 134 chunk_xfer->cs_change = 1; 135 } 136 137 rc = spi_sync_transfer(spi, xfers, 2 * num_chunks); 138 if (rc < 0) 139 dev_err(&spi->dev, "SPI transfer failed: %d\n", rc); 140 141 kfree(hdr_bufs); 142 kfree(xfers); 143 144 return rc; 145 } 146 147 int sja1105_xfer_buf(const struct sja1105_private *priv, 148 sja1105_spi_rw_mode_t rw, u64 reg_addr, 149 u8 *buf, size_t len) 150 { 151 return sja1105_xfer(priv, rw, reg_addr, buf, len, NULL); 152 } 153 154 /* If @rw is: 155 * - SPI_WRITE: creates and sends an SPI write message at absolute 156 * address reg_addr 157 * - SPI_READ: creates and sends an SPI read message from absolute 158 * address reg_addr 159 * 160 * The u64 *value is unpacked, meaning that it's stored in the native 161 * CPU endianness and directly usable by software running on the core. 162 */ 163 int sja1105_xfer_u64(const struct sja1105_private *priv, 164 sja1105_spi_rw_mode_t rw, u64 reg_addr, u64 *value, 165 struct ptp_system_timestamp *ptp_sts) 166 { 167 u8 packed_buf[8]; 168 int rc; 169 170 if (rw == SPI_WRITE) 171 sja1105_pack(packed_buf, value, 63, 0, 8); 172 173 rc = sja1105_xfer(priv, rw, reg_addr, packed_buf, 8, ptp_sts); 174 175 if (rw == SPI_READ) 176 sja1105_unpack(packed_buf, value, 63, 0, 8); 177 178 return rc; 179 } 180 181 /* Same as above, but transfers only a 4 byte word */ 182 int sja1105_xfer_u32(const struct sja1105_private *priv, 183 sja1105_spi_rw_mode_t rw, u64 reg_addr, u32 *value, 184 struct ptp_system_timestamp *ptp_sts) 185 { 186 u8 packed_buf[4]; 187 u64 tmp; 188 int rc; 189 190 if (rw == SPI_WRITE) { 191 /* The packing API only supports u64 as CPU word size, 192 * so we need to convert. 193 */ 194 tmp = *value; 195 sja1105_pack(packed_buf, &tmp, 31, 0, 4); 196 } 197 198 rc = sja1105_xfer(priv, rw, reg_addr, packed_buf, 4, ptp_sts); 199 200 if (rw == SPI_READ) { 201 sja1105_unpack(packed_buf, &tmp, 31, 0, 4); 202 *value = tmp; 203 } 204 205 return rc; 206 } 207 208 static int sja1105et_reset_cmd(struct dsa_switch *ds) 209 { 210 struct sja1105_private *priv = ds->priv; 211 const struct sja1105_regs *regs = priv->info->regs; 212 u8 packed_buf[SJA1105_SIZE_RESET_CMD] = {0}; 213 const int size = SJA1105_SIZE_RESET_CMD; 214 u64 cold_rst = 1; 215 216 sja1105_pack(packed_buf, &cold_rst, 3, 3, size); 217 218 return sja1105_xfer_buf(priv, SPI_WRITE, regs->rgu, packed_buf, 219 SJA1105_SIZE_RESET_CMD); 220 } 221 222 static int sja1105pqrs_reset_cmd(struct dsa_switch *ds) 223 { 224 struct sja1105_private *priv = ds->priv; 225 const struct sja1105_regs *regs = priv->info->regs; 226 u8 packed_buf[SJA1105_SIZE_RESET_CMD] = {0}; 227 const int size = SJA1105_SIZE_RESET_CMD; 228 u64 cold_rst = 1; 229 230 sja1105_pack(packed_buf, &cold_rst, 2, 2, size); 231 232 return sja1105_xfer_buf(priv, SPI_WRITE, regs->rgu, packed_buf, 233 SJA1105_SIZE_RESET_CMD); 234 } 235 236 int sja1105_inhibit_tx(const struct sja1105_private *priv, 237 unsigned long port_bitmap, bool tx_inhibited) 238 { 239 const struct sja1105_regs *regs = priv->info->regs; 240 u32 inhibit_cmd; 241 int rc; 242 243 rc = sja1105_xfer_u32(priv, SPI_READ, regs->port_control, 244 &inhibit_cmd, NULL); 245 if (rc < 0) 246 return rc; 247 248 if (tx_inhibited) 249 inhibit_cmd |= port_bitmap; 250 else 251 inhibit_cmd &= ~port_bitmap; 252 253 return sja1105_xfer_u32(priv, SPI_WRITE, regs->port_control, 254 &inhibit_cmd, NULL); 255 } 256 257 struct sja1105_status { 258 u64 configs; 259 u64 crcchkl; 260 u64 ids; 261 u64 crcchkg; 262 }; 263 264 /* This is not reading the entire General Status area, which is also 265 * divergent between E/T and P/Q/R/S, but only the relevant bits for 266 * ensuring that the static config upload procedure was successful. 267 */ 268 static void sja1105_status_unpack(void *buf, struct sja1105_status *status) 269 { 270 /* So that addition translates to 4 bytes */ 271 u32 *p = buf; 272 273 /* device_id is missing from the buffer, but we don't 274 * want to diverge from the manual definition of the 275 * register addresses, so we'll back off one step with 276 * the register pointer, and never access p[0]. 277 */ 278 p--; 279 sja1105_unpack(p + 0x1, &status->configs, 31, 31, 4); 280 sja1105_unpack(p + 0x1, &status->crcchkl, 30, 30, 4); 281 sja1105_unpack(p + 0x1, &status->ids, 29, 29, 4); 282 sja1105_unpack(p + 0x1, &status->crcchkg, 28, 28, 4); 283 } 284 285 static int sja1105_status_get(struct sja1105_private *priv, 286 struct sja1105_status *status) 287 { 288 const struct sja1105_regs *regs = priv->info->regs; 289 u8 packed_buf[4]; 290 int rc; 291 292 rc = sja1105_xfer_buf(priv, SPI_READ, regs->status, packed_buf, 4); 293 if (rc < 0) 294 return rc; 295 296 sja1105_status_unpack(packed_buf, status); 297 298 return 0; 299 } 300 301 /* Not const because unpacking priv->static_config into buffers and preparing 302 * for upload requires the recalculation of table CRCs and updating the 303 * structures with these. 304 */ 305 int static_config_buf_prepare_for_upload(struct sja1105_private *priv, 306 void *config_buf, int buf_len) 307 { 308 struct sja1105_static_config *config = &priv->static_config; 309 struct sja1105_table_header final_header; 310 sja1105_config_valid_t valid; 311 char *final_header_ptr; 312 int crc_len; 313 314 valid = sja1105_static_config_check_valid(config); 315 if (valid != SJA1105_CONFIG_OK) { 316 dev_err(&priv->spidev->dev, 317 sja1105_static_config_error_msg[valid]); 318 return -EINVAL; 319 } 320 321 /* Write Device ID and config tables to config_buf */ 322 sja1105_static_config_pack(config_buf, config); 323 /* Recalculate CRC of the last header (right now 0xDEADBEEF). 324 * Don't include the CRC field itself. 325 */ 326 crc_len = buf_len - 4; 327 /* Read the whole table header */ 328 final_header_ptr = config_buf + buf_len - SJA1105_SIZE_TABLE_HEADER; 329 sja1105_table_header_packing(final_header_ptr, &final_header, UNPACK); 330 /* Modify */ 331 final_header.crc = sja1105_crc32(config_buf, crc_len); 332 /* Rewrite */ 333 sja1105_table_header_packing(final_header_ptr, &final_header, PACK); 334 335 return 0; 336 } 337 338 #define RETRIES 10 339 340 int sja1105_static_config_upload(struct sja1105_private *priv) 341 { 342 unsigned long port_bitmap = GENMASK_ULL(SJA1105_NUM_PORTS - 1, 0); 343 struct sja1105_static_config *config = &priv->static_config; 344 const struct sja1105_regs *regs = priv->info->regs; 345 struct device *dev = &priv->spidev->dev; 346 struct sja1105_status status; 347 int rc, retries = RETRIES; 348 u8 *config_buf; 349 int buf_len; 350 351 buf_len = sja1105_static_config_get_length(config); 352 config_buf = kcalloc(buf_len, sizeof(char), GFP_KERNEL); 353 if (!config_buf) 354 return -ENOMEM; 355 356 rc = static_config_buf_prepare_for_upload(priv, config_buf, buf_len); 357 if (rc < 0) { 358 dev_err(dev, "Invalid config, cannot upload\n"); 359 rc = -EINVAL; 360 goto out; 361 } 362 /* Prevent PHY jabbering during switch reset by inhibiting 363 * Tx on all ports and waiting for current packet to drain. 364 * Otherwise, the PHY will see an unterminated Ethernet packet. 365 */ 366 rc = sja1105_inhibit_tx(priv, port_bitmap, true); 367 if (rc < 0) { 368 dev_err(dev, "Failed to inhibit Tx on ports\n"); 369 rc = -ENXIO; 370 goto out; 371 } 372 /* Wait for an eventual egress packet to finish transmission 373 * (reach IFG). It is guaranteed that a second one will not 374 * follow, and that switch cold reset is thus safe 375 */ 376 usleep_range(500, 1000); 377 do { 378 /* Put the SJA1105 in programming mode */ 379 rc = priv->info->reset_cmd(priv->ds); 380 if (rc < 0) { 381 dev_err(dev, "Failed to reset switch, retrying...\n"); 382 continue; 383 } 384 /* Wait for the switch to come out of reset */ 385 usleep_range(1000, 5000); 386 /* Upload the static config to the device */ 387 rc = sja1105_xfer_buf(priv, SPI_WRITE, regs->config, 388 config_buf, buf_len); 389 if (rc < 0) { 390 dev_err(dev, "Failed to upload config, retrying...\n"); 391 continue; 392 } 393 /* Check that SJA1105 responded well to the config upload */ 394 rc = sja1105_status_get(priv, &status); 395 if (rc < 0) 396 continue; 397 398 if (status.ids == 1) { 399 dev_err(dev, "Mismatch between hardware and static config " 400 "device id. Wrote 0x%llx, wants 0x%llx\n", 401 config->device_id, priv->info->device_id); 402 continue; 403 } 404 if (status.crcchkl == 1) { 405 dev_err(dev, "Switch reported invalid local CRC on " 406 "the uploaded config, retrying...\n"); 407 continue; 408 } 409 if (status.crcchkg == 1) { 410 dev_err(dev, "Switch reported invalid global CRC on " 411 "the uploaded config, retrying...\n"); 412 continue; 413 } 414 if (status.configs == 0) { 415 dev_err(dev, "Switch reported that configuration is " 416 "invalid, retrying...\n"); 417 continue; 418 } 419 /* Success! */ 420 break; 421 } while (--retries); 422 423 if (!retries) { 424 rc = -EIO; 425 dev_err(dev, "Failed to upload config to device, giving up\n"); 426 goto out; 427 } else if (retries != RETRIES) { 428 dev_info(dev, "Succeeded after %d tried\n", RETRIES - retries); 429 } 430 431 out: 432 kfree(config_buf); 433 return rc; 434 } 435 436 static struct sja1105_regs sja1105et_regs = { 437 .device_id = 0x0, 438 .prod_id = 0x100BC3, 439 .status = 0x1, 440 .port_control = 0x11, 441 .vl_status = 0x10000, 442 .config = 0x020000, 443 .rgu = 0x100440, 444 /* UM10944.pdf, Table 86, ACU Register overview */ 445 .pad_mii_tx = {0x100800, 0x100802, 0x100804, 0x100806, 0x100808}, 446 .pad_mii_rx = {0x100801, 0x100803, 0x100805, 0x100807, 0x100809}, 447 .rmii_pll1 = 0x10000A, 448 .cgu_idiv = {0x10000B, 0x10000C, 0x10000D, 0x10000E, 0x10000F}, 449 .mac = {0x200, 0x202, 0x204, 0x206, 0x208}, 450 .mac_hl1 = {0x400, 0x410, 0x420, 0x430, 0x440}, 451 .mac_hl2 = {0x600, 0x610, 0x620, 0x630, 0x640}, 452 /* UM10944.pdf, Table 78, CGU Register overview */ 453 .mii_tx_clk = {0x100013, 0x10001A, 0x100021, 0x100028, 0x10002F}, 454 .mii_rx_clk = {0x100014, 0x10001B, 0x100022, 0x100029, 0x100030}, 455 .mii_ext_tx_clk = {0x100018, 0x10001F, 0x100026, 0x10002D, 0x100034}, 456 .mii_ext_rx_clk = {0x100019, 0x100020, 0x100027, 0x10002E, 0x100035}, 457 .rgmii_tx_clk = {0x100016, 0x10001D, 0x100024, 0x10002B, 0x100032}, 458 .rmii_ref_clk = {0x100015, 0x10001C, 0x100023, 0x10002A, 0x100031}, 459 .rmii_ext_tx_clk = {0x100018, 0x10001F, 0x100026, 0x10002D, 0x100034}, 460 .ptpegr_ts = {0xC0, 0xC2, 0xC4, 0xC6, 0xC8}, 461 .ptpschtm = 0x12, /* Spans 0x12 to 0x13 */ 462 .ptppinst = 0x14, 463 .ptppindur = 0x16, 464 .ptp_control = 0x17, 465 .ptpclkval = 0x18, /* Spans 0x18 to 0x19 */ 466 .ptpclkrate = 0x1A, 467 .ptpclkcorp = 0x1D, 468 }; 469 470 static struct sja1105_regs sja1105pqrs_regs = { 471 .device_id = 0x0, 472 .prod_id = 0x100BC3, 473 .status = 0x1, 474 .port_control = 0x12, 475 .vl_status = 0x10000, 476 .config = 0x020000, 477 .rgu = 0x100440, 478 /* UM10944.pdf, Table 86, ACU Register overview */ 479 .pad_mii_tx = {0x100800, 0x100802, 0x100804, 0x100806, 0x100808}, 480 .pad_mii_rx = {0x100801, 0x100803, 0x100805, 0x100807, 0x100809}, 481 .pad_mii_id = {0x100810, 0x100811, 0x100812, 0x100813, 0x100814}, 482 .sgmii = 0x1F0000, 483 .rmii_pll1 = 0x10000A, 484 .cgu_idiv = {0x10000B, 0x10000C, 0x10000D, 0x10000E, 0x10000F}, 485 .mac = {0x200, 0x202, 0x204, 0x206, 0x208}, 486 .mac_hl1 = {0x400, 0x410, 0x420, 0x430, 0x440}, 487 .mac_hl2 = {0x600, 0x610, 0x620, 0x630, 0x640}, 488 .ether_stats = {0x1400, 0x1418, 0x1430, 0x1448, 0x1460}, 489 /* UM11040.pdf, Table 114 */ 490 .mii_tx_clk = {0x100013, 0x100019, 0x10001F, 0x100025, 0x10002B}, 491 .mii_rx_clk = {0x100014, 0x10001A, 0x100020, 0x100026, 0x10002C}, 492 .mii_ext_tx_clk = {0x100017, 0x10001D, 0x100023, 0x100029, 0x10002F}, 493 .mii_ext_rx_clk = {0x100018, 0x10001E, 0x100024, 0x10002A, 0x100030}, 494 .rgmii_tx_clk = {0x100016, 0x10001C, 0x100022, 0x100028, 0x10002E}, 495 .rmii_ref_clk = {0x100015, 0x10001B, 0x100021, 0x100027, 0x10002D}, 496 .rmii_ext_tx_clk = {0x100017, 0x10001D, 0x100023, 0x100029, 0x10002F}, 497 .qlevel = {0x604, 0x614, 0x624, 0x634, 0x644}, 498 .ptpegr_ts = {0xC0, 0xC4, 0xC8, 0xCC, 0xD0}, 499 .ptpschtm = 0x13, /* Spans 0x13 to 0x14 */ 500 .ptppinst = 0x15, 501 .ptppindur = 0x17, 502 .ptp_control = 0x18, 503 .ptpclkval = 0x19, 504 .ptpclkrate = 0x1B, 505 .ptpclkcorp = 0x1E, 506 .ptpsyncts = 0x1F, 507 }; 508 509 const struct sja1105_info sja1105e_info = { 510 .device_id = SJA1105E_DEVICE_ID, 511 .part_no = SJA1105ET_PART_NO, 512 .static_ops = sja1105e_table_ops, 513 .dyn_ops = sja1105et_dyn_ops, 514 .qinq_tpid = ETH_P_8021Q, 515 .ptp_ts_bits = 24, 516 .ptpegr_ts_bytes = 4, 517 .num_cbs_shapers = SJA1105ET_MAX_CBS_COUNT, 518 .reset_cmd = sja1105et_reset_cmd, 519 .fdb_add_cmd = sja1105et_fdb_add, 520 .fdb_del_cmd = sja1105et_fdb_del, 521 .ptp_cmd_packing = sja1105et_ptp_cmd_packing, 522 .regs = &sja1105et_regs, 523 .name = "SJA1105E", 524 }; 525 526 const struct sja1105_info sja1105t_info = { 527 .device_id = SJA1105T_DEVICE_ID, 528 .part_no = SJA1105ET_PART_NO, 529 .static_ops = sja1105t_table_ops, 530 .dyn_ops = sja1105et_dyn_ops, 531 .qinq_tpid = ETH_P_8021Q, 532 .ptp_ts_bits = 24, 533 .ptpegr_ts_bytes = 4, 534 .num_cbs_shapers = SJA1105ET_MAX_CBS_COUNT, 535 .reset_cmd = sja1105et_reset_cmd, 536 .fdb_add_cmd = sja1105et_fdb_add, 537 .fdb_del_cmd = sja1105et_fdb_del, 538 .ptp_cmd_packing = sja1105et_ptp_cmd_packing, 539 .regs = &sja1105et_regs, 540 .name = "SJA1105T", 541 }; 542 543 const struct sja1105_info sja1105p_info = { 544 .device_id = SJA1105PR_DEVICE_ID, 545 .part_no = SJA1105P_PART_NO, 546 .static_ops = sja1105p_table_ops, 547 .dyn_ops = sja1105pqrs_dyn_ops, 548 .qinq_tpid = ETH_P_8021AD, 549 .ptp_ts_bits = 32, 550 .ptpegr_ts_bytes = 8, 551 .num_cbs_shapers = SJA1105PQRS_MAX_CBS_COUNT, 552 .setup_rgmii_delay = sja1105pqrs_setup_rgmii_delay, 553 .reset_cmd = sja1105pqrs_reset_cmd, 554 .fdb_add_cmd = sja1105pqrs_fdb_add, 555 .fdb_del_cmd = sja1105pqrs_fdb_del, 556 .ptp_cmd_packing = sja1105pqrs_ptp_cmd_packing, 557 .regs = &sja1105pqrs_regs, 558 .name = "SJA1105P", 559 }; 560 561 const struct sja1105_info sja1105q_info = { 562 .device_id = SJA1105QS_DEVICE_ID, 563 .part_no = SJA1105Q_PART_NO, 564 .static_ops = sja1105q_table_ops, 565 .dyn_ops = sja1105pqrs_dyn_ops, 566 .qinq_tpid = ETH_P_8021AD, 567 .ptp_ts_bits = 32, 568 .ptpegr_ts_bytes = 8, 569 .num_cbs_shapers = SJA1105PQRS_MAX_CBS_COUNT, 570 .setup_rgmii_delay = sja1105pqrs_setup_rgmii_delay, 571 .reset_cmd = sja1105pqrs_reset_cmd, 572 .fdb_add_cmd = sja1105pqrs_fdb_add, 573 .fdb_del_cmd = sja1105pqrs_fdb_del, 574 .ptp_cmd_packing = sja1105pqrs_ptp_cmd_packing, 575 .regs = &sja1105pqrs_regs, 576 .name = "SJA1105Q", 577 }; 578 579 const struct sja1105_info sja1105r_info = { 580 .device_id = SJA1105PR_DEVICE_ID, 581 .part_no = SJA1105R_PART_NO, 582 .static_ops = sja1105r_table_ops, 583 .dyn_ops = sja1105pqrs_dyn_ops, 584 .qinq_tpid = ETH_P_8021AD, 585 .ptp_ts_bits = 32, 586 .ptpegr_ts_bytes = 8, 587 .num_cbs_shapers = SJA1105PQRS_MAX_CBS_COUNT, 588 .setup_rgmii_delay = sja1105pqrs_setup_rgmii_delay, 589 .reset_cmd = sja1105pqrs_reset_cmd, 590 .fdb_add_cmd = sja1105pqrs_fdb_add, 591 .fdb_del_cmd = sja1105pqrs_fdb_del, 592 .ptp_cmd_packing = sja1105pqrs_ptp_cmd_packing, 593 .regs = &sja1105pqrs_regs, 594 .name = "SJA1105R", 595 }; 596 597 const struct sja1105_info sja1105s_info = { 598 .device_id = SJA1105QS_DEVICE_ID, 599 .part_no = SJA1105S_PART_NO, 600 .static_ops = sja1105s_table_ops, 601 .dyn_ops = sja1105pqrs_dyn_ops, 602 .regs = &sja1105pqrs_regs, 603 .qinq_tpid = ETH_P_8021AD, 604 .ptp_ts_bits = 32, 605 .ptpegr_ts_bytes = 8, 606 .num_cbs_shapers = SJA1105PQRS_MAX_CBS_COUNT, 607 .setup_rgmii_delay = sja1105pqrs_setup_rgmii_delay, 608 .reset_cmd = sja1105pqrs_reset_cmd, 609 .fdb_add_cmd = sja1105pqrs_fdb_add, 610 .fdb_del_cmd = sja1105pqrs_fdb_del, 611 .ptp_cmd_packing = sja1105pqrs_ptp_cmd_packing, 612 .name = "SJA1105S", 613 }; 614