1 // SPDX-License-Identifier: GPL-2.0 2 /* Realtek SMI subdriver for the Realtek RTL8366RB ethernet switch 3 * 4 * This is a sparsely documented chip, the only viable documentation seems 5 * to be a patched up code drop from the vendor that appear in various 6 * GPL source trees. 7 * 8 * Copyright (C) 2017 Linus Walleij <linus.walleij@linaro.org> 9 * Copyright (C) 2009-2010 Gabor Juhos <juhosg@openwrt.org> 10 * Copyright (C) 2010 Antti Seppälä <a.seppala@gmail.com> 11 * Copyright (C) 2010 Roman Yeryomin <roman@advem.lv> 12 * Copyright (C) 2011 Colin Leitner <colin.leitner@googlemail.com> 13 */ 14 15 #include <linux/bitops.h> 16 #include <linux/etherdevice.h> 17 #include <linux/if_bridge.h> 18 #include <linux/interrupt.h> 19 #include <linux/irqdomain.h> 20 #include <linux/irqchip/chained_irq.h> 21 #include <linux/of_irq.h> 22 #include <linux/regmap.h> 23 24 #include "realtek.h" 25 26 #define RTL8366RB_PORT_NUM_CPU 5 27 #define RTL8366RB_NUM_PORTS 6 28 #define RTL8366RB_PHY_NO_MAX 4 29 #define RTL8366RB_PHY_ADDR_MAX 31 30 31 /* Switch Global Configuration register */ 32 #define RTL8366RB_SGCR 0x0000 33 #define RTL8366RB_SGCR_EN_BC_STORM_CTRL BIT(0) 34 #define RTL8366RB_SGCR_MAX_LENGTH(a) ((a) << 4) 35 #define RTL8366RB_SGCR_MAX_LENGTH_MASK RTL8366RB_SGCR_MAX_LENGTH(0x3) 36 #define RTL8366RB_SGCR_MAX_LENGTH_1522 RTL8366RB_SGCR_MAX_LENGTH(0x0) 37 #define RTL8366RB_SGCR_MAX_LENGTH_1536 RTL8366RB_SGCR_MAX_LENGTH(0x1) 38 #define RTL8366RB_SGCR_MAX_LENGTH_1552 RTL8366RB_SGCR_MAX_LENGTH(0x2) 39 #define RTL8366RB_SGCR_MAX_LENGTH_16000 RTL8366RB_SGCR_MAX_LENGTH(0x3) 40 #define RTL8366RB_SGCR_EN_VLAN BIT(13) 41 #define RTL8366RB_SGCR_EN_VLAN_4KTB BIT(14) 42 43 /* Port Enable Control register */ 44 #define RTL8366RB_PECR 0x0001 45 46 /* Switch per-port learning disablement register */ 47 #define RTL8366RB_PORT_LEARNDIS_CTRL 0x0002 48 49 /* Security control, actually aging register */ 50 #define RTL8366RB_SECURITY_CTRL 0x0003 51 52 #define RTL8366RB_SSCR2 0x0004 53 #define RTL8366RB_SSCR2_DROP_UNKNOWN_DA BIT(0) 54 55 /* Port Mode Control registers */ 56 #define RTL8366RB_PMC0 0x0005 57 #define RTL8366RB_PMC0_SPI BIT(0) 58 #define RTL8366RB_PMC0_EN_AUTOLOAD BIT(1) 59 #define RTL8366RB_PMC0_PROBE BIT(2) 60 #define RTL8366RB_PMC0_DIS_BISR BIT(3) 61 #define RTL8366RB_PMC0_ADCTEST BIT(4) 62 #define RTL8366RB_PMC0_SRAM_DIAG BIT(5) 63 #define RTL8366RB_PMC0_EN_SCAN BIT(6) 64 #define RTL8366RB_PMC0_P4_IOMODE_SHIFT 7 65 #define RTL8366RB_PMC0_P4_IOMODE_MASK GENMASK(9, 7) 66 #define RTL8366RB_PMC0_P5_IOMODE_SHIFT 10 67 #define RTL8366RB_PMC0_P5_IOMODE_MASK GENMASK(12, 10) 68 #define RTL8366RB_PMC0_SDSMODE_SHIFT 13 69 #define RTL8366RB_PMC0_SDSMODE_MASK GENMASK(15, 13) 70 #define RTL8366RB_PMC1 0x0006 71 72 /* Port Mirror Control Register */ 73 #define RTL8366RB_PMCR 0x0007 74 #define RTL8366RB_PMCR_SOURCE_PORT(a) (a) 75 #define RTL8366RB_PMCR_SOURCE_PORT_MASK 0x000f 76 #define RTL8366RB_PMCR_MONITOR_PORT(a) ((a) << 4) 77 #define RTL8366RB_PMCR_MONITOR_PORT_MASK 0x00f0 78 #define RTL8366RB_PMCR_MIRROR_RX BIT(8) 79 #define RTL8366RB_PMCR_MIRROR_TX BIT(9) 80 #define RTL8366RB_PMCR_MIRROR_SPC BIT(10) 81 #define RTL8366RB_PMCR_MIRROR_ISO BIT(11) 82 83 /* bits 0..7 = port 0, bits 8..15 = port 1 */ 84 #define RTL8366RB_PAACR0 0x0010 85 /* bits 0..7 = port 2, bits 8..15 = port 3 */ 86 #define RTL8366RB_PAACR1 0x0011 87 /* bits 0..7 = port 4, bits 8..15 = port 5 */ 88 #define RTL8366RB_PAACR2 0x0012 89 #define RTL8366RB_PAACR_SPEED_10M 0 90 #define RTL8366RB_PAACR_SPEED_100M 1 91 #define RTL8366RB_PAACR_SPEED_1000M 2 92 #define RTL8366RB_PAACR_FULL_DUPLEX BIT(2) 93 #define RTL8366RB_PAACR_LINK_UP BIT(4) 94 #define RTL8366RB_PAACR_TX_PAUSE BIT(5) 95 #define RTL8366RB_PAACR_RX_PAUSE BIT(6) 96 #define RTL8366RB_PAACR_AN BIT(7) 97 98 #define RTL8366RB_PAACR_CPU_PORT (RTL8366RB_PAACR_SPEED_1000M | \ 99 RTL8366RB_PAACR_FULL_DUPLEX | \ 100 RTL8366RB_PAACR_LINK_UP | \ 101 RTL8366RB_PAACR_TX_PAUSE | \ 102 RTL8366RB_PAACR_RX_PAUSE) 103 104 /* bits 0..7 = port 0, bits 8..15 = port 1 */ 105 #define RTL8366RB_PSTAT0 0x0014 106 /* bits 0..7 = port 2, bits 8..15 = port 3 */ 107 #define RTL8366RB_PSTAT1 0x0015 108 /* bits 0..7 = port 4, bits 8..15 = port 5 */ 109 #define RTL8366RB_PSTAT2 0x0016 110 111 #define RTL8366RB_POWER_SAVING_REG 0x0021 112 113 /* Spanning tree status (STP) control, two bits per port per FID */ 114 #define RTL8366RB_STP_STATE_BASE 0x0050 /* 0x0050..0x0057 */ 115 #define RTL8366RB_STP_STATE_DISABLED 0x0 116 #define RTL8366RB_STP_STATE_BLOCKING 0x1 117 #define RTL8366RB_STP_STATE_LEARNING 0x2 118 #define RTL8366RB_STP_STATE_FORWARDING 0x3 119 #define RTL8366RB_STP_MASK GENMASK(1, 0) 120 #define RTL8366RB_STP_STATE(port, state) \ 121 ((state) << ((port) * 2)) 122 #define RTL8366RB_STP_STATE_MASK(port) \ 123 RTL8366RB_STP_STATE((port), RTL8366RB_STP_MASK) 124 125 /* CPU port control reg */ 126 #define RTL8368RB_CPU_CTRL_REG 0x0061 127 #define RTL8368RB_CPU_PORTS_MSK 0x00FF 128 /* Disables inserting custom tag length/type 0x8899 */ 129 #define RTL8368RB_CPU_NO_TAG BIT(15) 130 131 #define RTL8366RB_SMAR0 0x0070 /* bits 0..15 */ 132 #define RTL8366RB_SMAR1 0x0071 /* bits 16..31 */ 133 #define RTL8366RB_SMAR2 0x0072 /* bits 32..47 */ 134 135 #define RTL8366RB_RESET_CTRL_REG 0x0100 136 #define RTL8366RB_CHIP_CTRL_RESET_HW BIT(0) 137 #define RTL8366RB_CHIP_CTRL_RESET_SW BIT(1) 138 139 #define RTL8366RB_CHIP_ID_REG 0x0509 140 #define RTL8366RB_CHIP_ID_8366 0x5937 141 #define RTL8366RB_CHIP_VERSION_CTRL_REG 0x050A 142 #define RTL8366RB_CHIP_VERSION_MASK 0xf 143 144 /* PHY registers control */ 145 #define RTL8366RB_PHY_ACCESS_CTRL_REG 0x8000 146 #define RTL8366RB_PHY_CTRL_READ BIT(0) 147 #define RTL8366RB_PHY_CTRL_WRITE 0 148 #define RTL8366RB_PHY_ACCESS_BUSY_REG 0x8001 149 #define RTL8366RB_PHY_INT_BUSY BIT(0) 150 #define RTL8366RB_PHY_EXT_BUSY BIT(4) 151 #define RTL8366RB_PHY_ACCESS_DATA_REG 0x8002 152 #define RTL8366RB_PHY_EXT_CTRL_REG 0x8010 153 #define RTL8366RB_PHY_EXT_WRDATA_REG 0x8011 154 #define RTL8366RB_PHY_EXT_RDDATA_REG 0x8012 155 156 #define RTL8366RB_PHY_REG_MASK 0x1f 157 #define RTL8366RB_PHY_PAGE_OFFSET 5 158 #define RTL8366RB_PHY_PAGE_MASK (0xf << 5) 159 #define RTL8366RB_PHY_NO_OFFSET 9 160 #define RTL8366RB_PHY_NO_MASK (0x1f << 9) 161 162 /* VLAN Ingress Control Register 1, one bit per port. 163 * bit 0 .. 5 will make the switch drop ingress frames without 164 * VID such as untagged or priority-tagged frames for respective 165 * port. 166 * bit 6 .. 11 will make the switch drop ingress frames carrying 167 * a C-tag with VID != 0 for respective port. 168 */ 169 #define RTL8366RB_VLAN_INGRESS_CTRL1_REG 0x037E 170 #define RTL8366RB_VLAN_INGRESS_CTRL1_DROP(port) (BIT((port)) | BIT((port) + 6)) 171 172 /* VLAN Ingress Control Register 2, one bit per port. 173 * bit0 .. bit5 will make the switch drop all ingress frames with 174 * a VLAN classification that does not include the port is in its 175 * member set. 176 */ 177 #define RTL8366RB_VLAN_INGRESS_CTRL2_REG 0x037f 178 179 /* LED control registers */ 180 #define RTL8366RB_LED_BLINKRATE_REG 0x0430 181 #define RTL8366RB_LED_BLINKRATE_MASK 0x0007 182 #define RTL8366RB_LED_BLINKRATE_28MS 0x0000 183 #define RTL8366RB_LED_BLINKRATE_56MS 0x0001 184 #define RTL8366RB_LED_BLINKRATE_84MS 0x0002 185 #define RTL8366RB_LED_BLINKRATE_111MS 0x0003 186 #define RTL8366RB_LED_BLINKRATE_222MS 0x0004 187 #define RTL8366RB_LED_BLINKRATE_446MS 0x0005 188 189 #define RTL8366RB_LED_CTRL_REG 0x0431 190 #define RTL8366RB_LED_OFF 0x0 191 #define RTL8366RB_LED_DUP_COL 0x1 192 #define RTL8366RB_LED_LINK_ACT 0x2 193 #define RTL8366RB_LED_SPD1000 0x3 194 #define RTL8366RB_LED_SPD100 0x4 195 #define RTL8366RB_LED_SPD10 0x5 196 #define RTL8366RB_LED_SPD1000_ACT 0x6 197 #define RTL8366RB_LED_SPD100_ACT 0x7 198 #define RTL8366RB_LED_SPD10_ACT 0x8 199 #define RTL8366RB_LED_SPD100_10_ACT 0x9 200 #define RTL8366RB_LED_FIBER 0xa 201 #define RTL8366RB_LED_AN_FAULT 0xb 202 #define RTL8366RB_LED_LINK_RX 0xc 203 #define RTL8366RB_LED_LINK_TX 0xd 204 #define RTL8366RB_LED_MASTER 0xe 205 #define RTL8366RB_LED_FORCE 0xf 206 #define RTL8366RB_LED_0_1_CTRL_REG 0x0432 207 #define RTL8366RB_LED_1_OFFSET 6 208 #define RTL8366RB_LED_2_3_CTRL_REG 0x0433 209 #define RTL8366RB_LED_3_OFFSET 6 210 211 #define RTL8366RB_MIB_COUNT 33 212 #define RTL8366RB_GLOBAL_MIB_COUNT 1 213 #define RTL8366RB_MIB_COUNTER_PORT_OFFSET 0x0050 214 #define RTL8366RB_MIB_COUNTER_BASE 0x1000 215 #define RTL8366RB_MIB_CTRL_REG 0x13F0 216 #define RTL8366RB_MIB_CTRL_USER_MASK 0x0FFC 217 #define RTL8366RB_MIB_CTRL_BUSY_MASK BIT(0) 218 #define RTL8366RB_MIB_CTRL_RESET_MASK BIT(1) 219 #define RTL8366RB_MIB_CTRL_PORT_RESET(_p) BIT(2 + (_p)) 220 #define RTL8366RB_MIB_CTRL_GLOBAL_RESET BIT(11) 221 222 #define RTL8366RB_PORT_VLAN_CTRL_BASE 0x0063 223 #define RTL8366RB_PORT_VLAN_CTRL_REG(_p) \ 224 (RTL8366RB_PORT_VLAN_CTRL_BASE + (_p) / 4) 225 #define RTL8366RB_PORT_VLAN_CTRL_MASK 0xf 226 #define RTL8366RB_PORT_VLAN_CTRL_SHIFT(_p) (4 * ((_p) % 4)) 227 228 #define RTL8366RB_VLAN_TABLE_READ_BASE 0x018C 229 #define RTL8366RB_VLAN_TABLE_WRITE_BASE 0x0185 230 231 #define RTL8366RB_TABLE_ACCESS_CTRL_REG 0x0180 232 #define RTL8366RB_TABLE_VLAN_READ_CTRL 0x0E01 233 #define RTL8366RB_TABLE_VLAN_WRITE_CTRL 0x0F01 234 235 #define RTL8366RB_VLAN_MC_BASE(_x) (0x0020 + (_x) * 3) 236 237 #define RTL8366RB_PORT_LINK_STATUS_BASE 0x0014 238 #define RTL8366RB_PORT_STATUS_SPEED_MASK 0x0003 239 #define RTL8366RB_PORT_STATUS_DUPLEX_MASK 0x0004 240 #define RTL8366RB_PORT_STATUS_LINK_MASK 0x0010 241 #define RTL8366RB_PORT_STATUS_TXPAUSE_MASK 0x0020 242 #define RTL8366RB_PORT_STATUS_RXPAUSE_MASK 0x0040 243 #define RTL8366RB_PORT_STATUS_AN_MASK 0x0080 244 245 #define RTL8366RB_NUM_VLANS 16 246 #define RTL8366RB_NUM_LEDGROUPS 4 247 #define RTL8366RB_NUM_VIDS 4096 248 #define RTL8366RB_PRIORITYMAX 7 249 #define RTL8366RB_NUM_FIDS 8 250 #define RTL8366RB_FIDMAX 7 251 252 #define RTL8366RB_PORT_1 BIT(0) /* In userspace port 0 */ 253 #define RTL8366RB_PORT_2 BIT(1) /* In userspace port 1 */ 254 #define RTL8366RB_PORT_3 BIT(2) /* In userspace port 2 */ 255 #define RTL8366RB_PORT_4 BIT(3) /* In userspace port 3 */ 256 #define RTL8366RB_PORT_5 BIT(4) /* In userspace port 4 */ 257 258 #define RTL8366RB_PORT_CPU BIT(5) /* CPU port */ 259 260 #define RTL8366RB_PORT_ALL (RTL8366RB_PORT_1 | \ 261 RTL8366RB_PORT_2 | \ 262 RTL8366RB_PORT_3 | \ 263 RTL8366RB_PORT_4 | \ 264 RTL8366RB_PORT_5 | \ 265 RTL8366RB_PORT_CPU) 266 267 #define RTL8366RB_PORT_ALL_BUT_CPU (RTL8366RB_PORT_1 | \ 268 RTL8366RB_PORT_2 | \ 269 RTL8366RB_PORT_3 | \ 270 RTL8366RB_PORT_4 | \ 271 RTL8366RB_PORT_5) 272 273 #define RTL8366RB_PORT_ALL_EXTERNAL (RTL8366RB_PORT_1 | \ 274 RTL8366RB_PORT_2 | \ 275 RTL8366RB_PORT_3 | \ 276 RTL8366RB_PORT_4) 277 278 #define RTL8366RB_PORT_ALL_INTERNAL RTL8366RB_PORT_CPU 279 280 /* First configuration word per member config, VID and prio */ 281 #define RTL8366RB_VLAN_VID_MASK 0xfff 282 #define RTL8366RB_VLAN_PRIORITY_SHIFT 12 283 #define RTL8366RB_VLAN_PRIORITY_MASK 0x7 284 /* Second configuration word per member config, member and untagged */ 285 #define RTL8366RB_VLAN_UNTAG_SHIFT 8 286 #define RTL8366RB_VLAN_UNTAG_MASK 0xff 287 #define RTL8366RB_VLAN_MEMBER_MASK 0xff 288 /* Third config word per member config, STAG currently unused */ 289 #define RTL8366RB_VLAN_STAG_MBR_MASK 0xff 290 #define RTL8366RB_VLAN_STAG_MBR_SHIFT 8 291 #define RTL8366RB_VLAN_STAG_IDX_MASK 0x7 292 #define RTL8366RB_VLAN_STAG_IDX_SHIFT 5 293 #define RTL8366RB_VLAN_FID_MASK 0x7 294 295 /* Port ingress bandwidth control */ 296 #define RTL8366RB_IB_BASE 0x0200 297 #define RTL8366RB_IB_REG(pnum) (RTL8366RB_IB_BASE + (pnum)) 298 #define RTL8366RB_IB_BDTH_MASK 0x3fff 299 #define RTL8366RB_IB_PREIFG BIT(14) 300 301 /* Port egress bandwidth control */ 302 #define RTL8366RB_EB_BASE 0x02d1 303 #define RTL8366RB_EB_REG(pnum) (RTL8366RB_EB_BASE + (pnum)) 304 #define RTL8366RB_EB_BDTH_MASK 0x3fff 305 #define RTL8366RB_EB_PREIFG_REG 0x02f8 306 #define RTL8366RB_EB_PREIFG BIT(9) 307 308 #define RTL8366RB_BDTH_SW_MAX 1048512 /* 1048576? */ 309 #define RTL8366RB_BDTH_UNIT 64 310 #define RTL8366RB_BDTH_REG_DEFAULT 16383 311 312 /* QOS */ 313 #define RTL8366RB_QOS BIT(15) 314 /* Include/Exclude Preamble and IFG (20 bytes). 0:Exclude, 1:Include. */ 315 #define RTL8366RB_QOS_DEFAULT_PREIFG 1 316 317 /* Interrupt handling */ 318 #define RTL8366RB_INTERRUPT_CONTROL_REG 0x0440 319 #define RTL8366RB_INTERRUPT_POLARITY BIT(0) 320 #define RTL8366RB_P4_RGMII_LED BIT(2) 321 #define RTL8366RB_INTERRUPT_MASK_REG 0x0441 322 #define RTL8366RB_INTERRUPT_LINK_CHGALL GENMASK(11, 0) 323 #define RTL8366RB_INTERRUPT_ACLEXCEED BIT(8) 324 #define RTL8366RB_INTERRUPT_STORMEXCEED BIT(9) 325 #define RTL8366RB_INTERRUPT_P4_FIBER BIT(12) 326 #define RTL8366RB_INTERRUPT_P4_UTP BIT(13) 327 #define RTL8366RB_INTERRUPT_VALID (RTL8366RB_INTERRUPT_LINK_CHGALL | \ 328 RTL8366RB_INTERRUPT_ACLEXCEED | \ 329 RTL8366RB_INTERRUPT_STORMEXCEED | \ 330 RTL8366RB_INTERRUPT_P4_FIBER | \ 331 RTL8366RB_INTERRUPT_P4_UTP) 332 #define RTL8366RB_INTERRUPT_STATUS_REG 0x0442 333 #define RTL8366RB_NUM_INTERRUPT 14 /* 0..13 */ 334 335 /* Port isolation registers */ 336 #define RTL8366RB_PORT_ISO_BASE 0x0F08 337 #define RTL8366RB_PORT_ISO(pnum) (RTL8366RB_PORT_ISO_BASE + (pnum)) 338 #define RTL8366RB_PORT_ISO_EN BIT(0) 339 #define RTL8366RB_PORT_ISO_PORTS_MASK GENMASK(7, 1) 340 #define RTL8366RB_PORT_ISO_PORTS(pmask) ((pmask) << 1) 341 342 /* bits 0..5 enable force when cleared */ 343 #define RTL8366RB_MAC_FORCE_CTRL_REG 0x0F11 344 345 #define RTL8366RB_OAM_PARSER_REG 0x0F14 346 #define RTL8366RB_OAM_MULTIPLEXER_REG 0x0F15 347 348 #define RTL8366RB_GREEN_FEATURE_REG 0x0F51 349 #define RTL8366RB_GREEN_FEATURE_MSK 0x0007 350 #define RTL8366RB_GREEN_FEATURE_TX BIT(0) 351 #define RTL8366RB_GREEN_FEATURE_RX BIT(2) 352 353 /** 354 * struct rtl8366rb - RTL8366RB-specific data 355 * @max_mtu: per-port max MTU setting 356 * @pvid_enabled: if PVID is set for respective port 357 */ 358 struct rtl8366rb { 359 unsigned int max_mtu[RTL8366RB_NUM_PORTS]; 360 bool pvid_enabled[RTL8366RB_NUM_PORTS]; 361 }; 362 363 static struct rtl8366_mib_counter rtl8366rb_mib_counters[] = { 364 { 0, 0, 4, "IfInOctets" }, 365 { 0, 4, 4, "EtherStatsOctets" }, 366 { 0, 8, 2, "EtherStatsUnderSizePkts" }, 367 { 0, 10, 2, "EtherFragments" }, 368 { 0, 12, 2, "EtherStatsPkts64Octets" }, 369 { 0, 14, 2, "EtherStatsPkts65to127Octets" }, 370 { 0, 16, 2, "EtherStatsPkts128to255Octets" }, 371 { 0, 18, 2, "EtherStatsPkts256to511Octets" }, 372 { 0, 20, 2, "EtherStatsPkts512to1023Octets" }, 373 { 0, 22, 2, "EtherStatsPkts1024to1518Octets" }, 374 { 0, 24, 2, "EtherOversizeStats" }, 375 { 0, 26, 2, "EtherStatsJabbers" }, 376 { 0, 28, 2, "IfInUcastPkts" }, 377 { 0, 30, 2, "EtherStatsMulticastPkts" }, 378 { 0, 32, 2, "EtherStatsBroadcastPkts" }, 379 { 0, 34, 2, "EtherStatsDropEvents" }, 380 { 0, 36, 2, "Dot3StatsFCSErrors" }, 381 { 0, 38, 2, "Dot3StatsSymbolErrors" }, 382 { 0, 40, 2, "Dot3InPauseFrames" }, 383 { 0, 42, 2, "Dot3ControlInUnknownOpcodes" }, 384 { 0, 44, 4, "IfOutOctets" }, 385 { 0, 48, 2, "Dot3StatsSingleCollisionFrames" }, 386 { 0, 50, 2, "Dot3StatMultipleCollisionFrames" }, 387 { 0, 52, 2, "Dot3sDeferredTransmissions" }, 388 { 0, 54, 2, "Dot3StatsLateCollisions" }, 389 { 0, 56, 2, "EtherStatsCollisions" }, 390 { 0, 58, 2, "Dot3StatsExcessiveCollisions" }, 391 { 0, 60, 2, "Dot3OutPauseFrames" }, 392 { 0, 62, 2, "Dot1dBasePortDelayExceededDiscards" }, 393 { 0, 64, 2, "Dot1dTpPortInDiscards" }, 394 { 0, 66, 2, "IfOutUcastPkts" }, 395 { 0, 68, 2, "IfOutMulticastPkts" }, 396 { 0, 70, 2, "IfOutBroadcastPkts" }, 397 }; 398 399 static int rtl8366rb_get_mib_counter(struct realtek_priv *priv, 400 int port, 401 struct rtl8366_mib_counter *mib, 402 u64 *mibvalue) 403 { 404 u32 addr, val; 405 int ret; 406 int i; 407 408 addr = RTL8366RB_MIB_COUNTER_BASE + 409 RTL8366RB_MIB_COUNTER_PORT_OFFSET * (port) + 410 mib->offset; 411 412 /* Writing access counter address first 413 * then ASIC will prepare 64bits counter wait for being retrived 414 */ 415 ret = regmap_write(priv->map, addr, 0); /* Write whatever */ 416 if (ret) 417 return ret; 418 419 /* Read MIB control register */ 420 ret = regmap_read(priv->map, RTL8366RB_MIB_CTRL_REG, &val); 421 if (ret) 422 return -EIO; 423 424 if (val & RTL8366RB_MIB_CTRL_BUSY_MASK) 425 return -EBUSY; 426 427 if (val & RTL8366RB_MIB_CTRL_RESET_MASK) 428 return -EIO; 429 430 /* Read each individual MIB 16 bits at the time */ 431 *mibvalue = 0; 432 for (i = mib->length; i > 0; i--) { 433 ret = regmap_read(priv->map, addr + (i - 1), &val); 434 if (ret) 435 return ret; 436 *mibvalue = (*mibvalue << 16) | (val & 0xFFFF); 437 } 438 return 0; 439 } 440 441 static u32 rtl8366rb_get_irqmask(struct irq_data *d) 442 { 443 int line = irqd_to_hwirq(d); 444 u32 val; 445 446 /* For line interrupts we combine link down in bits 447 * 6..11 with link up in bits 0..5 into one interrupt. 448 */ 449 if (line < 12) 450 val = BIT(line) | BIT(line + 6); 451 else 452 val = BIT(line); 453 return val; 454 } 455 456 static void rtl8366rb_mask_irq(struct irq_data *d) 457 { 458 struct realtek_priv *priv = irq_data_get_irq_chip_data(d); 459 int ret; 460 461 ret = regmap_update_bits(priv->map, RTL8366RB_INTERRUPT_MASK_REG, 462 rtl8366rb_get_irqmask(d), 0); 463 if (ret) 464 dev_err(priv->dev, "could not mask IRQ\n"); 465 } 466 467 static void rtl8366rb_unmask_irq(struct irq_data *d) 468 { 469 struct realtek_priv *priv = irq_data_get_irq_chip_data(d); 470 int ret; 471 472 ret = regmap_update_bits(priv->map, RTL8366RB_INTERRUPT_MASK_REG, 473 rtl8366rb_get_irqmask(d), 474 rtl8366rb_get_irqmask(d)); 475 if (ret) 476 dev_err(priv->dev, "could not unmask IRQ\n"); 477 } 478 479 static irqreturn_t rtl8366rb_irq(int irq, void *data) 480 { 481 struct realtek_priv *priv = data; 482 u32 stat; 483 int ret; 484 485 /* This clears the IRQ status register */ 486 ret = regmap_read(priv->map, RTL8366RB_INTERRUPT_STATUS_REG, 487 &stat); 488 if (ret) { 489 dev_err(priv->dev, "can't read interrupt status\n"); 490 return IRQ_NONE; 491 } 492 stat &= RTL8366RB_INTERRUPT_VALID; 493 if (!stat) 494 return IRQ_NONE; 495 while (stat) { 496 int line = __ffs(stat); 497 int child_irq; 498 499 stat &= ~BIT(line); 500 /* For line interrupts we combine link down in bits 501 * 6..11 with link up in bits 0..5 into one interrupt. 502 */ 503 if (line < 12 && line > 5) 504 line -= 5; 505 child_irq = irq_find_mapping(priv->irqdomain, line); 506 handle_nested_irq(child_irq); 507 } 508 return IRQ_HANDLED; 509 } 510 511 static struct irq_chip rtl8366rb_irq_chip = { 512 .name = "RTL8366RB", 513 .irq_mask = rtl8366rb_mask_irq, 514 .irq_unmask = rtl8366rb_unmask_irq, 515 }; 516 517 static int rtl8366rb_irq_map(struct irq_domain *domain, unsigned int irq, 518 irq_hw_number_t hwirq) 519 { 520 irq_set_chip_data(irq, domain->host_data); 521 irq_set_chip_and_handler(irq, &rtl8366rb_irq_chip, handle_simple_irq); 522 irq_set_nested_thread(irq, 1); 523 irq_set_noprobe(irq); 524 525 return 0; 526 } 527 528 static void rtl8366rb_irq_unmap(struct irq_domain *d, unsigned int irq) 529 { 530 irq_set_nested_thread(irq, 0); 531 irq_set_chip_and_handler(irq, NULL, NULL); 532 irq_set_chip_data(irq, NULL); 533 } 534 535 static const struct irq_domain_ops rtl8366rb_irqdomain_ops = { 536 .map = rtl8366rb_irq_map, 537 .unmap = rtl8366rb_irq_unmap, 538 .xlate = irq_domain_xlate_onecell, 539 }; 540 541 static int rtl8366rb_setup_cascaded_irq(struct realtek_priv *priv) 542 { 543 struct device_node *intc; 544 unsigned long irq_trig; 545 int irq; 546 int ret; 547 u32 val; 548 int i; 549 550 intc = of_get_child_by_name(priv->dev->of_node, "interrupt-controller"); 551 if (!intc) { 552 dev_err(priv->dev, "missing child interrupt-controller node\n"); 553 return -EINVAL; 554 } 555 /* RB8366RB IRQs cascade off this one */ 556 irq = of_irq_get(intc, 0); 557 if (irq <= 0) { 558 dev_err(priv->dev, "failed to get parent IRQ\n"); 559 ret = irq ? irq : -EINVAL; 560 goto out_put_node; 561 } 562 563 /* This clears the IRQ status register */ 564 ret = regmap_read(priv->map, RTL8366RB_INTERRUPT_STATUS_REG, 565 &val); 566 if (ret) { 567 dev_err(priv->dev, "can't read interrupt status\n"); 568 goto out_put_node; 569 } 570 571 /* Fetch IRQ edge information from the descriptor */ 572 irq_trig = irqd_get_trigger_type(irq_get_irq_data(irq)); 573 switch (irq_trig) { 574 case IRQF_TRIGGER_RISING: 575 case IRQF_TRIGGER_HIGH: 576 dev_info(priv->dev, "active high/rising IRQ\n"); 577 val = 0; 578 break; 579 case IRQF_TRIGGER_FALLING: 580 case IRQF_TRIGGER_LOW: 581 dev_info(priv->dev, "active low/falling IRQ\n"); 582 val = RTL8366RB_INTERRUPT_POLARITY; 583 break; 584 } 585 ret = regmap_update_bits(priv->map, RTL8366RB_INTERRUPT_CONTROL_REG, 586 RTL8366RB_INTERRUPT_POLARITY, 587 val); 588 if (ret) { 589 dev_err(priv->dev, "could not configure IRQ polarity\n"); 590 goto out_put_node; 591 } 592 593 ret = devm_request_threaded_irq(priv->dev, irq, NULL, 594 rtl8366rb_irq, IRQF_ONESHOT, 595 "RTL8366RB", priv); 596 if (ret) { 597 dev_err(priv->dev, "unable to request irq: %d\n", ret); 598 goto out_put_node; 599 } 600 priv->irqdomain = irq_domain_add_linear(intc, 601 RTL8366RB_NUM_INTERRUPT, 602 &rtl8366rb_irqdomain_ops, 603 priv); 604 if (!priv->irqdomain) { 605 dev_err(priv->dev, "failed to create IRQ domain\n"); 606 ret = -EINVAL; 607 goto out_put_node; 608 } 609 for (i = 0; i < priv->num_ports; i++) 610 irq_set_parent(irq_create_mapping(priv->irqdomain, i), irq); 611 612 out_put_node: 613 of_node_put(intc); 614 return ret; 615 } 616 617 static int rtl8366rb_set_addr(struct realtek_priv *priv) 618 { 619 u8 addr[ETH_ALEN]; 620 u16 val; 621 int ret; 622 623 eth_random_addr(addr); 624 625 dev_info(priv->dev, "set MAC: %02X:%02X:%02X:%02X:%02X:%02X\n", 626 addr[0], addr[1], addr[2], addr[3], addr[4], addr[5]); 627 val = addr[0] << 8 | addr[1]; 628 ret = regmap_write(priv->map, RTL8366RB_SMAR0, val); 629 if (ret) 630 return ret; 631 val = addr[2] << 8 | addr[3]; 632 ret = regmap_write(priv->map, RTL8366RB_SMAR1, val); 633 if (ret) 634 return ret; 635 val = addr[4] << 8 | addr[5]; 636 ret = regmap_write(priv->map, RTL8366RB_SMAR2, val); 637 if (ret) 638 return ret; 639 640 return 0; 641 } 642 643 /* Found in a vendor driver */ 644 645 /* Struct for handling the jam tables' entries */ 646 struct rtl8366rb_jam_tbl_entry { 647 u16 reg; 648 u16 val; 649 }; 650 651 /* For the "version 0" early silicon, appear in most source releases */ 652 static const struct rtl8366rb_jam_tbl_entry rtl8366rb_init_jam_ver_0[] = { 653 {0x000B, 0x0001}, {0x03A6, 0x0100}, {0x03A7, 0x0001}, {0x02D1, 0x3FFF}, 654 {0x02D2, 0x3FFF}, {0x02D3, 0x3FFF}, {0x02D4, 0x3FFF}, {0x02D5, 0x3FFF}, 655 {0x02D6, 0x3FFF}, {0x02D7, 0x3FFF}, {0x02D8, 0x3FFF}, {0x022B, 0x0688}, 656 {0x022C, 0x0FAC}, {0x03D0, 0x4688}, {0x03D1, 0x01F5}, {0x0000, 0x0830}, 657 {0x02F9, 0x0200}, {0x02F7, 0x7FFF}, {0x02F8, 0x03FF}, {0x0080, 0x03E8}, 658 {0x0081, 0x00CE}, {0x0082, 0x00DA}, {0x0083, 0x0230}, {0xBE0F, 0x2000}, 659 {0x0231, 0x422A}, {0x0232, 0x422A}, {0x0233, 0x422A}, {0x0234, 0x422A}, 660 {0x0235, 0x422A}, {0x0236, 0x422A}, {0x0237, 0x422A}, {0x0238, 0x422A}, 661 {0x0239, 0x422A}, {0x023A, 0x422A}, {0x023B, 0x422A}, {0x023C, 0x422A}, 662 {0x023D, 0x422A}, {0x023E, 0x422A}, {0x023F, 0x422A}, {0x0240, 0x422A}, 663 {0x0241, 0x422A}, {0x0242, 0x422A}, {0x0243, 0x422A}, {0x0244, 0x422A}, 664 {0x0245, 0x422A}, {0x0246, 0x422A}, {0x0247, 0x422A}, {0x0248, 0x422A}, 665 {0x0249, 0x0146}, {0x024A, 0x0146}, {0x024B, 0x0146}, {0xBE03, 0xC961}, 666 {0x024D, 0x0146}, {0x024E, 0x0146}, {0x024F, 0x0146}, {0x0250, 0x0146}, 667 {0xBE64, 0x0226}, {0x0252, 0x0146}, {0x0253, 0x0146}, {0x024C, 0x0146}, 668 {0x0251, 0x0146}, {0x0254, 0x0146}, {0xBE62, 0x3FD0}, {0x0084, 0x0320}, 669 {0x0255, 0x0146}, {0x0256, 0x0146}, {0x0257, 0x0146}, {0x0258, 0x0146}, 670 {0x0259, 0x0146}, {0x025A, 0x0146}, {0x025B, 0x0146}, {0x025C, 0x0146}, 671 {0x025D, 0x0146}, {0x025E, 0x0146}, {0x025F, 0x0146}, {0x0260, 0x0146}, 672 {0x0261, 0xA23F}, {0x0262, 0x0294}, {0x0263, 0xA23F}, {0x0264, 0x0294}, 673 {0x0265, 0xA23F}, {0x0266, 0x0294}, {0x0267, 0xA23F}, {0x0268, 0x0294}, 674 {0x0269, 0xA23F}, {0x026A, 0x0294}, {0x026B, 0xA23F}, {0x026C, 0x0294}, 675 {0x026D, 0xA23F}, {0x026E, 0x0294}, {0x026F, 0xA23F}, {0x0270, 0x0294}, 676 {0x02F5, 0x0048}, {0xBE09, 0x0E00}, {0xBE1E, 0x0FA0}, {0xBE14, 0x8448}, 677 {0xBE15, 0x1007}, {0xBE4A, 0xA284}, {0xC454, 0x3F0B}, {0xC474, 0x3F0B}, 678 {0xBE48, 0x3672}, {0xBE4B, 0x17A7}, {0xBE4C, 0x0B15}, {0xBE52, 0x0EDD}, 679 {0xBE49, 0x8C00}, {0xBE5B, 0x785C}, {0xBE5C, 0x785C}, {0xBE5D, 0x785C}, 680 {0xBE61, 0x368A}, {0xBE63, 0x9B84}, {0xC456, 0xCC13}, {0xC476, 0xCC13}, 681 {0xBE65, 0x307D}, {0xBE6D, 0x0005}, {0xBE6E, 0xE120}, {0xBE2E, 0x7BAF}, 682 }; 683 684 /* This v1 init sequence is from Belkin F5D8235 U-Boot release */ 685 static const struct rtl8366rb_jam_tbl_entry rtl8366rb_init_jam_ver_1[] = { 686 {0x0000, 0x0830}, {0x0001, 0x8000}, {0x0400, 0x8130}, {0xBE78, 0x3C3C}, 687 {0x0431, 0x5432}, {0xBE37, 0x0CE4}, {0x02FA, 0xFFDF}, {0x02FB, 0xFFE0}, 688 {0xC44C, 0x1585}, {0xC44C, 0x1185}, {0xC44C, 0x1585}, {0xC46C, 0x1585}, 689 {0xC46C, 0x1185}, {0xC46C, 0x1585}, {0xC451, 0x2135}, {0xC471, 0x2135}, 690 {0xBE10, 0x8140}, {0xBE15, 0x0007}, {0xBE6E, 0xE120}, {0xBE69, 0xD20F}, 691 {0xBE6B, 0x0320}, {0xBE24, 0xB000}, {0xBE23, 0xFF51}, {0xBE22, 0xDF20}, 692 {0xBE21, 0x0140}, {0xBE20, 0x00BB}, {0xBE24, 0xB800}, {0xBE24, 0x0000}, 693 {0xBE24, 0x7000}, {0xBE23, 0xFF51}, {0xBE22, 0xDF60}, {0xBE21, 0x0140}, 694 {0xBE20, 0x0077}, {0xBE24, 0x7800}, {0xBE24, 0x0000}, {0xBE2E, 0x7B7A}, 695 {0xBE36, 0x0CE4}, {0x02F5, 0x0048}, {0xBE77, 0x2940}, {0x000A, 0x83E0}, 696 {0xBE79, 0x3C3C}, {0xBE00, 0x1340}, 697 }; 698 699 /* This v2 init sequence is from Belkin F5D8235 U-Boot release */ 700 static const struct rtl8366rb_jam_tbl_entry rtl8366rb_init_jam_ver_2[] = { 701 {0x0450, 0x0000}, {0x0400, 0x8130}, {0x000A, 0x83ED}, {0x0431, 0x5432}, 702 {0xC44F, 0x6250}, {0xC46F, 0x6250}, {0xC456, 0x0C14}, {0xC476, 0x0C14}, 703 {0xC44C, 0x1C85}, {0xC44C, 0x1885}, {0xC44C, 0x1C85}, {0xC46C, 0x1C85}, 704 {0xC46C, 0x1885}, {0xC46C, 0x1C85}, {0xC44C, 0x0885}, {0xC44C, 0x0881}, 705 {0xC44C, 0x0885}, {0xC46C, 0x0885}, {0xC46C, 0x0881}, {0xC46C, 0x0885}, 706 {0xBE2E, 0x7BA7}, {0xBE36, 0x1000}, {0xBE37, 0x1000}, {0x8000, 0x0001}, 707 {0xBE69, 0xD50F}, {0x8000, 0x0000}, {0xBE69, 0xD50F}, {0xBE6E, 0x0320}, 708 {0xBE77, 0x2940}, {0xBE78, 0x3C3C}, {0xBE79, 0x3C3C}, {0xBE6E, 0xE120}, 709 {0x8000, 0x0001}, {0xBE15, 0x1007}, {0x8000, 0x0000}, {0xBE15, 0x1007}, 710 {0xBE14, 0x0448}, {0xBE1E, 0x00A0}, {0xBE10, 0x8160}, {0xBE10, 0x8140}, 711 {0xBE00, 0x1340}, {0x0F51, 0x0010}, 712 }; 713 714 /* Appears in a DDWRT code dump */ 715 static const struct rtl8366rb_jam_tbl_entry rtl8366rb_init_jam_ver_3[] = { 716 {0x0000, 0x0830}, {0x0400, 0x8130}, {0x000A, 0x83ED}, {0x0431, 0x5432}, 717 {0x0F51, 0x0017}, {0x02F5, 0x0048}, {0x02FA, 0xFFDF}, {0x02FB, 0xFFE0}, 718 {0xC456, 0x0C14}, {0xC476, 0x0C14}, {0xC454, 0x3F8B}, {0xC474, 0x3F8B}, 719 {0xC450, 0x2071}, {0xC470, 0x2071}, {0xC451, 0x226B}, {0xC471, 0x226B}, 720 {0xC452, 0xA293}, {0xC472, 0xA293}, {0xC44C, 0x1585}, {0xC44C, 0x1185}, 721 {0xC44C, 0x1585}, {0xC46C, 0x1585}, {0xC46C, 0x1185}, {0xC46C, 0x1585}, 722 {0xC44C, 0x0185}, {0xC44C, 0x0181}, {0xC44C, 0x0185}, {0xC46C, 0x0185}, 723 {0xC46C, 0x0181}, {0xC46C, 0x0185}, {0xBE24, 0xB000}, {0xBE23, 0xFF51}, 724 {0xBE22, 0xDF20}, {0xBE21, 0x0140}, {0xBE20, 0x00BB}, {0xBE24, 0xB800}, 725 {0xBE24, 0x0000}, {0xBE24, 0x7000}, {0xBE23, 0xFF51}, {0xBE22, 0xDF60}, 726 {0xBE21, 0x0140}, {0xBE20, 0x0077}, {0xBE24, 0x7800}, {0xBE24, 0x0000}, 727 {0xBE2E, 0x7BA7}, {0xBE36, 0x1000}, {0xBE37, 0x1000}, {0x8000, 0x0001}, 728 {0xBE69, 0xD50F}, {0x8000, 0x0000}, {0xBE69, 0xD50F}, {0xBE6B, 0x0320}, 729 {0xBE77, 0x2800}, {0xBE78, 0x3C3C}, {0xBE79, 0x3C3C}, {0xBE6E, 0xE120}, 730 {0x8000, 0x0001}, {0xBE10, 0x8140}, {0x8000, 0x0000}, {0xBE10, 0x8140}, 731 {0xBE15, 0x1007}, {0xBE14, 0x0448}, {0xBE1E, 0x00A0}, {0xBE10, 0x8160}, 732 {0xBE10, 0x8140}, {0xBE00, 0x1340}, {0x0450, 0x0000}, {0x0401, 0x0000}, 733 }; 734 735 /* Belkin F5D8235 v1, "belkin,f5d8235-v1" */ 736 static const struct rtl8366rb_jam_tbl_entry rtl8366rb_init_jam_f5d8235[] = { 737 {0x0242, 0x02BF}, {0x0245, 0x02BF}, {0x0248, 0x02BF}, {0x024B, 0x02BF}, 738 {0x024E, 0x02BF}, {0x0251, 0x02BF}, {0x0254, 0x0A3F}, {0x0256, 0x0A3F}, 739 {0x0258, 0x0A3F}, {0x025A, 0x0A3F}, {0x025C, 0x0A3F}, {0x025E, 0x0A3F}, 740 {0x0263, 0x007C}, {0x0100, 0x0004}, {0xBE5B, 0x3500}, {0x800E, 0x200F}, 741 {0xBE1D, 0x0F00}, {0x8001, 0x5011}, {0x800A, 0xA2F4}, {0x800B, 0x17A3}, 742 {0xBE4B, 0x17A3}, {0xBE41, 0x5011}, {0xBE17, 0x2100}, {0x8000, 0x8304}, 743 {0xBE40, 0x8304}, {0xBE4A, 0xA2F4}, {0x800C, 0xA8D5}, {0x8014, 0x5500}, 744 {0x8015, 0x0004}, {0xBE4C, 0xA8D5}, {0xBE59, 0x0008}, {0xBE09, 0x0E00}, 745 {0xBE36, 0x1036}, {0xBE37, 0x1036}, {0x800D, 0x00FF}, {0xBE4D, 0x00FF}, 746 }; 747 748 /* DGN3500, "netgear,dgn3500", "netgear,dgn3500b" */ 749 static const struct rtl8366rb_jam_tbl_entry rtl8366rb_init_jam_dgn3500[] = { 750 {0x0000, 0x0830}, {0x0400, 0x8130}, {0x000A, 0x83ED}, {0x0F51, 0x0017}, 751 {0x02F5, 0x0048}, {0x02FA, 0xFFDF}, {0x02FB, 0xFFE0}, {0x0450, 0x0000}, 752 {0x0401, 0x0000}, {0x0431, 0x0960}, 753 }; 754 755 /* This jam table activates "green ethernet", which means low power mode 756 * and is claimed to detect the cable length and not use more power than 757 * necessary, and the ports should enter power saving mode 10 seconds after 758 * a cable is disconnected. Seems to always be the same. 759 */ 760 static const struct rtl8366rb_jam_tbl_entry rtl8366rb_green_jam[] = { 761 {0xBE78, 0x323C}, {0xBE77, 0x5000}, {0xBE2E, 0x7BA7}, 762 {0xBE59, 0x3459}, {0xBE5A, 0x745A}, {0xBE5B, 0x785C}, 763 {0xBE5C, 0x785C}, {0xBE6E, 0xE120}, {0xBE79, 0x323C}, 764 }; 765 766 /* Function that jams the tables in the proper registers */ 767 static int rtl8366rb_jam_table(const struct rtl8366rb_jam_tbl_entry *jam_table, 768 int jam_size, struct realtek_priv *priv, 769 bool write_dbg) 770 { 771 u32 val; 772 int ret; 773 int i; 774 775 for (i = 0; i < jam_size; i++) { 776 if ((jam_table[i].reg & 0xBE00) == 0xBE00) { 777 ret = regmap_read(priv->map, 778 RTL8366RB_PHY_ACCESS_BUSY_REG, 779 &val); 780 if (ret) 781 return ret; 782 if (!(val & RTL8366RB_PHY_INT_BUSY)) { 783 ret = regmap_write(priv->map, 784 RTL8366RB_PHY_ACCESS_CTRL_REG, 785 RTL8366RB_PHY_CTRL_WRITE); 786 if (ret) 787 return ret; 788 } 789 } 790 if (write_dbg) 791 dev_dbg(priv->dev, "jam %04x into register %04x\n", 792 jam_table[i].val, 793 jam_table[i].reg); 794 ret = regmap_write(priv->map, 795 jam_table[i].reg, 796 jam_table[i].val); 797 if (ret) 798 return ret; 799 } 800 return 0; 801 } 802 803 static int rtl8366rb_setup(struct dsa_switch *ds) 804 { 805 struct realtek_priv *priv = ds->priv; 806 const struct rtl8366rb_jam_tbl_entry *jam_table; 807 struct rtl8366rb *rb; 808 u32 chip_ver = 0; 809 u32 chip_id = 0; 810 int jam_size; 811 u32 val; 812 int ret; 813 int i; 814 815 rb = priv->chip_data; 816 817 ret = regmap_read(priv->map, RTL8366RB_CHIP_ID_REG, &chip_id); 818 if (ret) { 819 dev_err(priv->dev, "unable to read chip id\n"); 820 return ret; 821 } 822 823 switch (chip_id) { 824 case RTL8366RB_CHIP_ID_8366: 825 break; 826 default: 827 dev_err(priv->dev, "unknown chip id (%04x)\n", chip_id); 828 return -ENODEV; 829 } 830 831 ret = regmap_read(priv->map, RTL8366RB_CHIP_VERSION_CTRL_REG, 832 &chip_ver); 833 if (ret) { 834 dev_err(priv->dev, "unable to read chip version\n"); 835 return ret; 836 } 837 838 dev_info(priv->dev, "RTL%04x ver %u chip found\n", 839 chip_id, chip_ver & RTL8366RB_CHIP_VERSION_MASK); 840 841 /* Do the init dance using the right jam table */ 842 switch (chip_ver) { 843 case 0: 844 jam_table = rtl8366rb_init_jam_ver_0; 845 jam_size = ARRAY_SIZE(rtl8366rb_init_jam_ver_0); 846 break; 847 case 1: 848 jam_table = rtl8366rb_init_jam_ver_1; 849 jam_size = ARRAY_SIZE(rtl8366rb_init_jam_ver_1); 850 break; 851 case 2: 852 jam_table = rtl8366rb_init_jam_ver_2; 853 jam_size = ARRAY_SIZE(rtl8366rb_init_jam_ver_2); 854 break; 855 default: 856 jam_table = rtl8366rb_init_jam_ver_3; 857 jam_size = ARRAY_SIZE(rtl8366rb_init_jam_ver_3); 858 break; 859 } 860 861 /* Special jam tables for special routers 862 * TODO: are these necessary? Maintainers, please test 863 * without them, using just the off-the-shelf tables. 864 */ 865 if (of_machine_is_compatible("belkin,f5d8235-v1")) { 866 jam_table = rtl8366rb_init_jam_f5d8235; 867 jam_size = ARRAY_SIZE(rtl8366rb_init_jam_f5d8235); 868 } 869 if (of_machine_is_compatible("netgear,dgn3500") || 870 of_machine_is_compatible("netgear,dgn3500b")) { 871 jam_table = rtl8366rb_init_jam_dgn3500; 872 jam_size = ARRAY_SIZE(rtl8366rb_init_jam_dgn3500); 873 } 874 875 ret = rtl8366rb_jam_table(jam_table, jam_size, priv, true); 876 if (ret) 877 return ret; 878 879 /* Isolate all user ports so they can only send packets to itself and the CPU port */ 880 for (i = 0; i < RTL8366RB_PORT_NUM_CPU; i++) { 881 ret = regmap_write(priv->map, RTL8366RB_PORT_ISO(i), 882 RTL8366RB_PORT_ISO_PORTS(BIT(RTL8366RB_PORT_NUM_CPU)) | 883 RTL8366RB_PORT_ISO_EN); 884 if (ret) 885 return ret; 886 } 887 /* CPU port can send packets to all ports */ 888 ret = regmap_write(priv->map, RTL8366RB_PORT_ISO(RTL8366RB_PORT_NUM_CPU), 889 RTL8366RB_PORT_ISO_PORTS(dsa_user_ports(ds)) | 890 RTL8366RB_PORT_ISO_EN); 891 if (ret) 892 return ret; 893 894 /* Set up the "green ethernet" feature */ 895 ret = rtl8366rb_jam_table(rtl8366rb_green_jam, 896 ARRAY_SIZE(rtl8366rb_green_jam), priv, false); 897 if (ret) 898 return ret; 899 900 ret = regmap_write(priv->map, 901 RTL8366RB_GREEN_FEATURE_REG, 902 (chip_ver == 1) ? 0x0007 : 0x0003); 903 if (ret) 904 return ret; 905 906 /* Vendor driver sets 0x240 in registers 0xc and 0xd (undocumented) */ 907 ret = regmap_write(priv->map, 0x0c, 0x240); 908 if (ret) 909 return ret; 910 ret = regmap_write(priv->map, 0x0d, 0x240); 911 if (ret) 912 return ret; 913 914 /* Set some random MAC address */ 915 ret = rtl8366rb_set_addr(priv); 916 if (ret) 917 return ret; 918 919 /* Enable CPU port with custom DSA tag 8899. 920 * 921 * If you set RTL8368RB_CPU_NO_TAG (bit 15) in this registers 922 * the custom tag is turned off. 923 */ 924 ret = regmap_update_bits(priv->map, RTL8368RB_CPU_CTRL_REG, 925 0xFFFF, 926 BIT(priv->cpu_port)); 927 if (ret) 928 return ret; 929 930 /* Make sure we default-enable the fixed CPU port */ 931 ret = regmap_update_bits(priv->map, RTL8366RB_PECR, 932 BIT(priv->cpu_port), 933 0); 934 if (ret) 935 return ret; 936 937 /* Set maximum packet length to 1536 bytes */ 938 ret = regmap_update_bits(priv->map, RTL8366RB_SGCR, 939 RTL8366RB_SGCR_MAX_LENGTH_MASK, 940 RTL8366RB_SGCR_MAX_LENGTH_1536); 941 if (ret) 942 return ret; 943 for (i = 0; i < RTL8366RB_NUM_PORTS; i++) 944 /* layer 2 size, see rtl8366rb_change_mtu() */ 945 rb->max_mtu[i] = 1532; 946 947 /* Disable learning for all ports */ 948 ret = regmap_write(priv->map, RTL8366RB_PORT_LEARNDIS_CTRL, 949 RTL8366RB_PORT_ALL); 950 if (ret) 951 return ret; 952 953 /* Enable auto ageing for all ports */ 954 ret = regmap_write(priv->map, RTL8366RB_SECURITY_CTRL, 0); 955 if (ret) 956 return ret; 957 958 /* Port 4 setup: this enables Port 4, usually the WAN port, 959 * common PHY IO mode is apparently mode 0, and this is not what 960 * the port is initialized to. There is no explanation of the 961 * IO modes in the Realtek source code, if your WAN port is 962 * connected to something exotic such as fiber, then this might 963 * be worth experimenting with. 964 */ 965 ret = regmap_update_bits(priv->map, RTL8366RB_PMC0, 966 RTL8366RB_PMC0_P4_IOMODE_MASK, 967 0 << RTL8366RB_PMC0_P4_IOMODE_SHIFT); 968 if (ret) 969 return ret; 970 971 /* Accept all packets by default, we enable filtering on-demand */ 972 ret = regmap_write(priv->map, RTL8366RB_VLAN_INGRESS_CTRL1_REG, 973 0); 974 if (ret) 975 return ret; 976 ret = regmap_write(priv->map, RTL8366RB_VLAN_INGRESS_CTRL2_REG, 977 0); 978 if (ret) 979 return ret; 980 981 /* Don't drop packets whose DA has not been learned */ 982 ret = regmap_update_bits(priv->map, RTL8366RB_SSCR2, 983 RTL8366RB_SSCR2_DROP_UNKNOWN_DA, 0); 984 if (ret) 985 return ret; 986 987 /* Set blinking, TODO: make this configurable */ 988 ret = regmap_update_bits(priv->map, RTL8366RB_LED_BLINKRATE_REG, 989 RTL8366RB_LED_BLINKRATE_MASK, 990 RTL8366RB_LED_BLINKRATE_56MS); 991 if (ret) 992 return ret; 993 994 /* Set up LED activity: 995 * Each port has 4 LEDs, we configure all ports to the same 996 * behaviour (no individual config) but we can set up each 997 * LED separately. 998 */ 999 if (priv->leds_disabled) { 1000 /* Turn everything off */ 1001 regmap_update_bits(priv->map, 1002 RTL8366RB_LED_0_1_CTRL_REG, 1003 0x0FFF, 0); 1004 regmap_update_bits(priv->map, 1005 RTL8366RB_LED_2_3_CTRL_REG, 1006 0x0FFF, 0); 1007 regmap_update_bits(priv->map, 1008 RTL8366RB_INTERRUPT_CONTROL_REG, 1009 RTL8366RB_P4_RGMII_LED, 1010 0); 1011 val = RTL8366RB_LED_OFF; 1012 } else { 1013 /* TODO: make this configurable per LED */ 1014 val = RTL8366RB_LED_FORCE; 1015 } 1016 for (i = 0; i < 4; i++) { 1017 ret = regmap_update_bits(priv->map, 1018 RTL8366RB_LED_CTRL_REG, 1019 0xf << (i * 4), 1020 val << (i * 4)); 1021 if (ret) 1022 return ret; 1023 } 1024 1025 ret = rtl8366_reset_vlan(priv); 1026 if (ret) 1027 return ret; 1028 1029 ret = rtl8366rb_setup_cascaded_irq(priv); 1030 if (ret) 1031 dev_info(priv->dev, "no interrupt support\n"); 1032 1033 if (priv->setup_interface) { 1034 ret = priv->setup_interface(ds); 1035 if (ret) { 1036 dev_err(priv->dev, "could not set up MDIO bus\n"); 1037 return -ENODEV; 1038 } 1039 } 1040 1041 return 0; 1042 } 1043 1044 static enum dsa_tag_protocol rtl8366_get_tag_protocol(struct dsa_switch *ds, 1045 int port, 1046 enum dsa_tag_protocol mp) 1047 { 1048 /* This switch uses the 4 byte protocol A Realtek DSA tag */ 1049 return DSA_TAG_PROTO_RTL4_A; 1050 } 1051 1052 static void 1053 rtl8366rb_mac_link_up(struct dsa_switch *ds, int port, unsigned int mode, 1054 phy_interface_t interface, struct phy_device *phydev, 1055 int speed, int duplex, bool tx_pause, bool rx_pause) 1056 { 1057 struct realtek_priv *priv = ds->priv; 1058 int ret; 1059 1060 if (port != priv->cpu_port) 1061 return; 1062 1063 dev_dbg(priv->dev, "MAC link up on CPU port (%d)\n", port); 1064 1065 /* Force the fixed CPU port into 1Gbit mode, no autonegotiation */ 1066 ret = regmap_update_bits(priv->map, RTL8366RB_MAC_FORCE_CTRL_REG, 1067 BIT(port), BIT(port)); 1068 if (ret) { 1069 dev_err(priv->dev, "failed to force 1Gbit on CPU port\n"); 1070 return; 1071 } 1072 1073 ret = regmap_update_bits(priv->map, RTL8366RB_PAACR2, 1074 0xFF00U, 1075 RTL8366RB_PAACR_CPU_PORT << 8); 1076 if (ret) { 1077 dev_err(priv->dev, "failed to set PAACR on CPU port\n"); 1078 return; 1079 } 1080 1081 /* Enable the CPU port */ 1082 ret = regmap_update_bits(priv->map, RTL8366RB_PECR, BIT(port), 1083 0); 1084 if (ret) { 1085 dev_err(priv->dev, "failed to enable the CPU port\n"); 1086 return; 1087 } 1088 } 1089 1090 static void 1091 rtl8366rb_mac_link_down(struct dsa_switch *ds, int port, unsigned int mode, 1092 phy_interface_t interface) 1093 { 1094 struct realtek_priv *priv = ds->priv; 1095 int ret; 1096 1097 if (port != priv->cpu_port) 1098 return; 1099 1100 dev_dbg(priv->dev, "MAC link down on CPU port (%d)\n", port); 1101 1102 /* Disable the CPU port */ 1103 ret = regmap_update_bits(priv->map, RTL8366RB_PECR, BIT(port), 1104 BIT(port)); 1105 if (ret) { 1106 dev_err(priv->dev, "failed to disable the CPU port\n"); 1107 return; 1108 } 1109 } 1110 1111 static void rb8366rb_set_port_led(struct realtek_priv *priv, 1112 int port, bool enable) 1113 { 1114 u16 val = enable ? 0x3f : 0; 1115 int ret; 1116 1117 if (priv->leds_disabled) 1118 return; 1119 1120 switch (port) { 1121 case 0: 1122 ret = regmap_update_bits(priv->map, 1123 RTL8366RB_LED_0_1_CTRL_REG, 1124 0x3F, val); 1125 break; 1126 case 1: 1127 ret = regmap_update_bits(priv->map, 1128 RTL8366RB_LED_0_1_CTRL_REG, 1129 0x3F << RTL8366RB_LED_1_OFFSET, 1130 val << RTL8366RB_LED_1_OFFSET); 1131 break; 1132 case 2: 1133 ret = regmap_update_bits(priv->map, 1134 RTL8366RB_LED_2_3_CTRL_REG, 1135 0x3F, val); 1136 break; 1137 case 3: 1138 ret = regmap_update_bits(priv->map, 1139 RTL8366RB_LED_2_3_CTRL_REG, 1140 0x3F << RTL8366RB_LED_3_OFFSET, 1141 val << RTL8366RB_LED_3_OFFSET); 1142 break; 1143 case 4: 1144 ret = regmap_update_bits(priv->map, 1145 RTL8366RB_INTERRUPT_CONTROL_REG, 1146 RTL8366RB_P4_RGMII_LED, 1147 enable ? RTL8366RB_P4_RGMII_LED : 0); 1148 break; 1149 default: 1150 dev_err(priv->dev, "no LED for port %d\n", port); 1151 return; 1152 } 1153 if (ret) 1154 dev_err(priv->dev, "error updating LED on port %d\n", port); 1155 } 1156 1157 static int 1158 rtl8366rb_port_enable(struct dsa_switch *ds, int port, 1159 struct phy_device *phy) 1160 { 1161 struct realtek_priv *priv = ds->priv; 1162 int ret; 1163 1164 dev_dbg(priv->dev, "enable port %d\n", port); 1165 ret = regmap_update_bits(priv->map, RTL8366RB_PECR, BIT(port), 1166 0); 1167 if (ret) 1168 return ret; 1169 1170 rb8366rb_set_port_led(priv, port, true); 1171 return 0; 1172 } 1173 1174 static void 1175 rtl8366rb_port_disable(struct dsa_switch *ds, int port) 1176 { 1177 struct realtek_priv *priv = ds->priv; 1178 int ret; 1179 1180 dev_dbg(priv->dev, "disable port %d\n", port); 1181 ret = regmap_update_bits(priv->map, RTL8366RB_PECR, BIT(port), 1182 BIT(port)); 1183 if (ret) 1184 return; 1185 1186 rb8366rb_set_port_led(priv, port, false); 1187 } 1188 1189 static int 1190 rtl8366rb_port_bridge_join(struct dsa_switch *ds, int port, 1191 struct dsa_bridge bridge, 1192 bool *tx_fwd_offload, 1193 struct netlink_ext_ack *extack) 1194 { 1195 struct realtek_priv *priv = ds->priv; 1196 unsigned int port_bitmap = 0; 1197 int ret, i; 1198 1199 /* Loop over all other ports than the current one */ 1200 for (i = 0; i < RTL8366RB_PORT_NUM_CPU; i++) { 1201 /* Current port handled last */ 1202 if (i == port) 1203 continue; 1204 /* Not on this bridge */ 1205 if (!dsa_port_offloads_bridge(dsa_to_port(ds, i), &bridge)) 1206 continue; 1207 /* Join this port to each other port on the bridge */ 1208 ret = regmap_update_bits(priv->map, RTL8366RB_PORT_ISO(i), 1209 RTL8366RB_PORT_ISO_PORTS(BIT(port)), 1210 RTL8366RB_PORT_ISO_PORTS(BIT(port))); 1211 if (ret) 1212 dev_err(priv->dev, "failed to join port %d\n", port); 1213 1214 port_bitmap |= BIT(i); 1215 } 1216 1217 /* Set the bits for the ports we can access */ 1218 return regmap_update_bits(priv->map, RTL8366RB_PORT_ISO(port), 1219 RTL8366RB_PORT_ISO_PORTS(port_bitmap), 1220 RTL8366RB_PORT_ISO_PORTS(port_bitmap)); 1221 } 1222 1223 static void 1224 rtl8366rb_port_bridge_leave(struct dsa_switch *ds, int port, 1225 struct dsa_bridge bridge) 1226 { 1227 struct realtek_priv *priv = ds->priv; 1228 unsigned int port_bitmap = 0; 1229 int ret, i; 1230 1231 /* Loop over all other ports than this one */ 1232 for (i = 0; i < RTL8366RB_PORT_NUM_CPU; i++) { 1233 /* Current port handled last */ 1234 if (i == port) 1235 continue; 1236 /* Not on this bridge */ 1237 if (!dsa_port_offloads_bridge(dsa_to_port(ds, i), &bridge)) 1238 continue; 1239 /* Remove this port from any other port on the bridge */ 1240 ret = regmap_update_bits(priv->map, RTL8366RB_PORT_ISO(i), 1241 RTL8366RB_PORT_ISO_PORTS(BIT(port)), 0); 1242 if (ret) 1243 dev_err(priv->dev, "failed to leave port %d\n", port); 1244 1245 port_bitmap |= BIT(i); 1246 } 1247 1248 /* Clear the bits for the ports we can not access, leave ourselves */ 1249 regmap_update_bits(priv->map, RTL8366RB_PORT_ISO(port), 1250 RTL8366RB_PORT_ISO_PORTS(port_bitmap), 0); 1251 } 1252 1253 /** 1254 * rtl8366rb_drop_untagged() - make the switch drop untagged and C-tagged frames 1255 * @priv: SMI state container 1256 * @port: the port to drop untagged and C-tagged frames on 1257 * @drop: whether to drop or pass untagged and C-tagged frames 1258 * 1259 * Return: zero for success, a negative number on error. 1260 */ 1261 static int rtl8366rb_drop_untagged(struct realtek_priv *priv, int port, bool drop) 1262 { 1263 return regmap_update_bits(priv->map, RTL8366RB_VLAN_INGRESS_CTRL1_REG, 1264 RTL8366RB_VLAN_INGRESS_CTRL1_DROP(port), 1265 drop ? RTL8366RB_VLAN_INGRESS_CTRL1_DROP(port) : 0); 1266 } 1267 1268 static int rtl8366rb_vlan_filtering(struct dsa_switch *ds, int port, 1269 bool vlan_filtering, 1270 struct netlink_ext_ack *extack) 1271 { 1272 struct realtek_priv *priv = ds->priv; 1273 struct rtl8366rb *rb; 1274 int ret; 1275 1276 rb = priv->chip_data; 1277 1278 dev_dbg(priv->dev, "port %d: %s VLAN filtering\n", port, 1279 vlan_filtering ? "enable" : "disable"); 1280 1281 /* If the port is not in the member set, the frame will be dropped */ 1282 ret = regmap_update_bits(priv->map, RTL8366RB_VLAN_INGRESS_CTRL2_REG, 1283 BIT(port), vlan_filtering ? BIT(port) : 0); 1284 if (ret) 1285 return ret; 1286 1287 /* If VLAN filtering is enabled and PVID is also enabled, we must 1288 * not drop any untagged or C-tagged frames. If we turn off VLAN 1289 * filtering on a port, we need to accept any frames. 1290 */ 1291 if (vlan_filtering) 1292 ret = rtl8366rb_drop_untagged(priv, port, !rb->pvid_enabled[port]); 1293 else 1294 ret = rtl8366rb_drop_untagged(priv, port, false); 1295 1296 return ret; 1297 } 1298 1299 static int 1300 rtl8366rb_port_pre_bridge_flags(struct dsa_switch *ds, int port, 1301 struct switchdev_brport_flags flags, 1302 struct netlink_ext_ack *extack) 1303 { 1304 /* We support enabling/disabling learning */ 1305 if (flags.mask & ~(BR_LEARNING)) 1306 return -EINVAL; 1307 1308 return 0; 1309 } 1310 1311 static int 1312 rtl8366rb_port_bridge_flags(struct dsa_switch *ds, int port, 1313 struct switchdev_brport_flags flags, 1314 struct netlink_ext_ack *extack) 1315 { 1316 struct realtek_priv *priv = ds->priv; 1317 int ret; 1318 1319 if (flags.mask & BR_LEARNING) { 1320 ret = regmap_update_bits(priv->map, RTL8366RB_PORT_LEARNDIS_CTRL, 1321 BIT(port), 1322 (flags.val & BR_LEARNING) ? 0 : BIT(port)); 1323 if (ret) 1324 return ret; 1325 } 1326 1327 return 0; 1328 } 1329 1330 static void 1331 rtl8366rb_port_stp_state_set(struct dsa_switch *ds, int port, u8 state) 1332 { 1333 struct realtek_priv *priv = ds->priv; 1334 u32 val; 1335 int i; 1336 1337 switch (state) { 1338 case BR_STATE_DISABLED: 1339 val = RTL8366RB_STP_STATE_DISABLED; 1340 break; 1341 case BR_STATE_BLOCKING: 1342 case BR_STATE_LISTENING: 1343 val = RTL8366RB_STP_STATE_BLOCKING; 1344 break; 1345 case BR_STATE_LEARNING: 1346 val = RTL8366RB_STP_STATE_LEARNING; 1347 break; 1348 case BR_STATE_FORWARDING: 1349 val = RTL8366RB_STP_STATE_FORWARDING; 1350 break; 1351 default: 1352 dev_err(priv->dev, "unknown bridge state requested\n"); 1353 return; 1354 } 1355 1356 /* Set the same status for the port on all the FIDs */ 1357 for (i = 0; i < RTL8366RB_NUM_FIDS; i++) { 1358 regmap_update_bits(priv->map, RTL8366RB_STP_STATE_BASE + i, 1359 RTL8366RB_STP_STATE_MASK(port), 1360 RTL8366RB_STP_STATE(port, val)); 1361 } 1362 } 1363 1364 static void 1365 rtl8366rb_port_fast_age(struct dsa_switch *ds, int port) 1366 { 1367 struct realtek_priv *priv = ds->priv; 1368 1369 /* This will age out any learned L2 entries */ 1370 regmap_update_bits(priv->map, RTL8366RB_SECURITY_CTRL, 1371 BIT(port), BIT(port)); 1372 /* Restore the normal state of things */ 1373 regmap_update_bits(priv->map, RTL8366RB_SECURITY_CTRL, 1374 BIT(port), 0); 1375 } 1376 1377 static int rtl8366rb_change_mtu(struct dsa_switch *ds, int port, int new_mtu) 1378 { 1379 struct realtek_priv *priv = ds->priv; 1380 struct rtl8366rb *rb; 1381 unsigned int max_mtu; 1382 u32 len; 1383 int i; 1384 1385 /* Cache the per-port MTU setting */ 1386 rb = priv->chip_data; 1387 rb->max_mtu[port] = new_mtu; 1388 1389 /* Roof out the MTU for the entire switch to the greatest 1390 * common denominator: the biggest set for any one port will 1391 * be the biggest MTU for the switch. 1392 * 1393 * The first setting, 1522 bytes, is max IP packet 1500 bytes, 1394 * plus ethernet header, 1518 bytes, plus CPU tag, 4 bytes. 1395 * This function should consider the parameter an SDU, so the 1396 * MTU passed for this setting is 1518 bytes. The same logic 1397 * of subtracting the DSA tag of 4 bytes apply to the other 1398 * settings. 1399 */ 1400 max_mtu = 1518; 1401 for (i = 0; i < RTL8366RB_NUM_PORTS; i++) { 1402 if (rb->max_mtu[i] > max_mtu) 1403 max_mtu = rb->max_mtu[i]; 1404 } 1405 if (max_mtu <= 1518) 1406 len = RTL8366RB_SGCR_MAX_LENGTH_1522; 1407 else if (max_mtu > 1518 && max_mtu <= 1532) 1408 len = RTL8366RB_SGCR_MAX_LENGTH_1536; 1409 else if (max_mtu > 1532 && max_mtu <= 1548) 1410 len = RTL8366RB_SGCR_MAX_LENGTH_1552; 1411 else 1412 len = RTL8366RB_SGCR_MAX_LENGTH_16000; 1413 1414 return regmap_update_bits(priv->map, RTL8366RB_SGCR, 1415 RTL8366RB_SGCR_MAX_LENGTH_MASK, 1416 len); 1417 } 1418 1419 static int rtl8366rb_max_mtu(struct dsa_switch *ds, int port) 1420 { 1421 /* The max MTU is 16000 bytes, so we subtract the CPU tag 1422 * and the max presented to the system is 15996 bytes. 1423 */ 1424 return 15996; 1425 } 1426 1427 static int rtl8366rb_get_vlan_4k(struct realtek_priv *priv, u32 vid, 1428 struct rtl8366_vlan_4k *vlan4k) 1429 { 1430 u32 data[3]; 1431 int ret; 1432 int i; 1433 1434 memset(vlan4k, '\0', sizeof(struct rtl8366_vlan_4k)); 1435 1436 if (vid >= RTL8366RB_NUM_VIDS) 1437 return -EINVAL; 1438 1439 /* write VID */ 1440 ret = regmap_write(priv->map, RTL8366RB_VLAN_TABLE_WRITE_BASE, 1441 vid & RTL8366RB_VLAN_VID_MASK); 1442 if (ret) 1443 return ret; 1444 1445 /* write table access control word */ 1446 ret = regmap_write(priv->map, RTL8366RB_TABLE_ACCESS_CTRL_REG, 1447 RTL8366RB_TABLE_VLAN_READ_CTRL); 1448 if (ret) 1449 return ret; 1450 1451 for (i = 0; i < 3; i++) { 1452 ret = regmap_read(priv->map, 1453 RTL8366RB_VLAN_TABLE_READ_BASE + i, 1454 &data[i]); 1455 if (ret) 1456 return ret; 1457 } 1458 1459 vlan4k->vid = vid; 1460 vlan4k->untag = (data[1] >> RTL8366RB_VLAN_UNTAG_SHIFT) & 1461 RTL8366RB_VLAN_UNTAG_MASK; 1462 vlan4k->member = data[1] & RTL8366RB_VLAN_MEMBER_MASK; 1463 vlan4k->fid = data[2] & RTL8366RB_VLAN_FID_MASK; 1464 1465 return 0; 1466 } 1467 1468 static int rtl8366rb_set_vlan_4k(struct realtek_priv *priv, 1469 const struct rtl8366_vlan_4k *vlan4k) 1470 { 1471 u32 data[3]; 1472 int ret; 1473 int i; 1474 1475 if (vlan4k->vid >= RTL8366RB_NUM_VIDS || 1476 vlan4k->member > RTL8366RB_VLAN_MEMBER_MASK || 1477 vlan4k->untag > RTL8366RB_VLAN_UNTAG_MASK || 1478 vlan4k->fid > RTL8366RB_FIDMAX) 1479 return -EINVAL; 1480 1481 data[0] = vlan4k->vid & RTL8366RB_VLAN_VID_MASK; 1482 data[1] = (vlan4k->member & RTL8366RB_VLAN_MEMBER_MASK) | 1483 ((vlan4k->untag & RTL8366RB_VLAN_UNTAG_MASK) << 1484 RTL8366RB_VLAN_UNTAG_SHIFT); 1485 data[2] = vlan4k->fid & RTL8366RB_VLAN_FID_MASK; 1486 1487 for (i = 0; i < 3; i++) { 1488 ret = regmap_write(priv->map, 1489 RTL8366RB_VLAN_TABLE_WRITE_BASE + i, 1490 data[i]); 1491 if (ret) 1492 return ret; 1493 } 1494 1495 /* write table access control word */ 1496 ret = regmap_write(priv->map, RTL8366RB_TABLE_ACCESS_CTRL_REG, 1497 RTL8366RB_TABLE_VLAN_WRITE_CTRL); 1498 1499 return ret; 1500 } 1501 1502 static int rtl8366rb_get_vlan_mc(struct realtek_priv *priv, u32 index, 1503 struct rtl8366_vlan_mc *vlanmc) 1504 { 1505 u32 data[3]; 1506 int ret; 1507 int i; 1508 1509 memset(vlanmc, '\0', sizeof(struct rtl8366_vlan_mc)); 1510 1511 if (index >= RTL8366RB_NUM_VLANS) 1512 return -EINVAL; 1513 1514 for (i = 0; i < 3; i++) { 1515 ret = regmap_read(priv->map, 1516 RTL8366RB_VLAN_MC_BASE(index) + i, 1517 &data[i]); 1518 if (ret) 1519 return ret; 1520 } 1521 1522 vlanmc->vid = data[0] & RTL8366RB_VLAN_VID_MASK; 1523 vlanmc->priority = (data[0] >> RTL8366RB_VLAN_PRIORITY_SHIFT) & 1524 RTL8366RB_VLAN_PRIORITY_MASK; 1525 vlanmc->untag = (data[1] >> RTL8366RB_VLAN_UNTAG_SHIFT) & 1526 RTL8366RB_VLAN_UNTAG_MASK; 1527 vlanmc->member = data[1] & RTL8366RB_VLAN_MEMBER_MASK; 1528 vlanmc->fid = data[2] & RTL8366RB_VLAN_FID_MASK; 1529 1530 return 0; 1531 } 1532 1533 static int rtl8366rb_set_vlan_mc(struct realtek_priv *priv, u32 index, 1534 const struct rtl8366_vlan_mc *vlanmc) 1535 { 1536 u32 data[3]; 1537 int ret; 1538 int i; 1539 1540 if (index >= RTL8366RB_NUM_VLANS || 1541 vlanmc->vid >= RTL8366RB_NUM_VIDS || 1542 vlanmc->priority > RTL8366RB_PRIORITYMAX || 1543 vlanmc->member > RTL8366RB_VLAN_MEMBER_MASK || 1544 vlanmc->untag > RTL8366RB_VLAN_UNTAG_MASK || 1545 vlanmc->fid > RTL8366RB_FIDMAX) 1546 return -EINVAL; 1547 1548 data[0] = (vlanmc->vid & RTL8366RB_VLAN_VID_MASK) | 1549 ((vlanmc->priority & RTL8366RB_VLAN_PRIORITY_MASK) << 1550 RTL8366RB_VLAN_PRIORITY_SHIFT); 1551 data[1] = (vlanmc->member & RTL8366RB_VLAN_MEMBER_MASK) | 1552 ((vlanmc->untag & RTL8366RB_VLAN_UNTAG_MASK) << 1553 RTL8366RB_VLAN_UNTAG_SHIFT); 1554 data[2] = vlanmc->fid & RTL8366RB_VLAN_FID_MASK; 1555 1556 for (i = 0; i < 3; i++) { 1557 ret = regmap_write(priv->map, 1558 RTL8366RB_VLAN_MC_BASE(index) + i, 1559 data[i]); 1560 if (ret) 1561 return ret; 1562 } 1563 1564 return 0; 1565 } 1566 1567 static int rtl8366rb_get_mc_index(struct realtek_priv *priv, int port, int *val) 1568 { 1569 u32 data; 1570 int ret; 1571 1572 if (port >= priv->num_ports) 1573 return -EINVAL; 1574 1575 ret = regmap_read(priv->map, RTL8366RB_PORT_VLAN_CTRL_REG(port), 1576 &data); 1577 if (ret) 1578 return ret; 1579 1580 *val = (data >> RTL8366RB_PORT_VLAN_CTRL_SHIFT(port)) & 1581 RTL8366RB_PORT_VLAN_CTRL_MASK; 1582 1583 return 0; 1584 } 1585 1586 static int rtl8366rb_set_mc_index(struct realtek_priv *priv, int port, int index) 1587 { 1588 struct rtl8366rb *rb; 1589 bool pvid_enabled; 1590 int ret; 1591 1592 rb = priv->chip_data; 1593 pvid_enabled = !!index; 1594 1595 if (port >= priv->num_ports || index >= RTL8366RB_NUM_VLANS) 1596 return -EINVAL; 1597 1598 ret = regmap_update_bits(priv->map, RTL8366RB_PORT_VLAN_CTRL_REG(port), 1599 RTL8366RB_PORT_VLAN_CTRL_MASK << 1600 RTL8366RB_PORT_VLAN_CTRL_SHIFT(port), 1601 (index & RTL8366RB_PORT_VLAN_CTRL_MASK) << 1602 RTL8366RB_PORT_VLAN_CTRL_SHIFT(port)); 1603 if (ret) 1604 return ret; 1605 1606 rb->pvid_enabled[port] = pvid_enabled; 1607 1608 /* If VLAN filtering is enabled and PVID is also enabled, we must 1609 * not drop any untagged or C-tagged frames. Make sure to update the 1610 * filtering setting. 1611 */ 1612 if (dsa_port_is_vlan_filtering(dsa_to_port(priv->ds, port))) 1613 ret = rtl8366rb_drop_untagged(priv, port, !pvid_enabled); 1614 1615 return ret; 1616 } 1617 1618 static bool rtl8366rb_is_vlan_valid(struct realtek_priv *priv, unsigned int vlan) 1619 { 1620 unsigned int max = RTL8366RB_NUM_VLANS - 1; 1621 1622 if (priv->vlan4k_enabled) 1623 max = RTL8366RB_NUM_VIDS - 1; 1624 1625 if (vlan > max) 1626 return false; 1627 1628 return true; 1629 } 1630 1631 static int rtl8366rb_enable_vlan(struct realtek_priv *priv, bool enable) 1632 { 1633 dev_dbg(priv->dev, "%s VLAN\n", enable ? "enable" : "disable"); 1634 return regmap_update_bits(priv->map, 1635 RTL8366RB_SGCR, RTL8366RB_SGCR_EN_VLAN, 1636 enable ? RTL8366RB_SGCR_EN_VLAN : 0); 1637 } 1638 1639 static int rtl8366rb_enable_vlan4k(struct realtek_priv *priv, bool enable) 1640 { 1641 dev_dbg(priv->dev, "%s VLAN 4k\n", enable ? "enable" : "disable"); 1642 return regmap_update_bits(priv->map, RTL8366RB_SGCR, 1643 RTL8366RB_SGCR_EN_VLAN_4KTB, 1644 enable ? RTL8366RB_SGCR_EN_VLAN_4KTB : 0); 1645 } 1646 1647 static int rtl8366rb_phy_read(struct realtek_priv *priv, int phy, int regnum) 1648 { 1649 u32 val; 1650 u32 reg; 1651 int ret; 1652 1653 if (phy > RTL8366RB_PHY_NO_MAX) 1654 return -EINVAL; 1655 1656 mutex_lock(&priv->map_lock); 1657 1658 ret = regmap_write(priv->map_nolock, RTL8366RB_PHY_ACCESS_CTRL_REG, 1659 RTL8366RB_PHY_CTRL_READ); 1660 if (ret) 1661 goto out; 1662 1663 reg = 0x8000 | (1 << (phy + RTL8366RB_PHY_NO_OFFSET)) | regnum; 1664 1665 ret = regmap_write(priv->map_nolock, reg, 0); 1666 if (ret) { 1667 dev_err(priv->dev, 1668 "failed to write PHY%d reg %04x @ %04x, ret %d\n", 1669 phy, regnum, reg, ret); 1670 goto out; 1671 } 1672 1673 ret = regmap_read(priv->map_nolock, RTL8366RB_PHY_ACCESS_DATA_REG, 1674 &val); 1675 if (ret) 1676 goto out; 1677 1678 ret = val; 1679 1680 dev_dbg(priv->dev, "read PHY%d register 0x%04x @ %08x, val <- %04x\n", 1681 phy, regnum, reg, val); 1682 1683 out: 1684 mutex_unlock(&priv->map_lock); 1685 1686 return ret; 1687 } 1688 1689 static int rtl8366rb_phy_write(struct realtek_priv *priv, int phy, int regnum, 1690 u16 val) 1691 { 1692 u32 reg; 1693 int ret; 1694 1695 if (phy > RTL8366RB_PHY_NO_MAX) 1696 return -EINVAL; 1697 1698 mutex_lock(&priv->map_lock); 1699 1700 ret = regmap_write(priv->map_nolock, RTL8366RB_PHY_ACCESS_CTRL_REG, 1701 RTL8366RB_PHY_CTRL_WRITE); 1702 if (ret) 1703 goto out; 1704 1705 reg = 0x8000 | (1 << (phy + RTL8366RB_PHY_NO_OFFSET)) | regnum; 1706 1707 dev_dbg(priv->dev, "write PHY%d register 0x%04x @ %04x, val -> %04x\n", 1708 phy, regnum, reg, val); 1709 1710 ret = regmap_write(priv->map_nolock, reg, val); 1711 if (ret) 1712 goto out; 1713 1714 out: 1715 mutex_unlock(&priv->map_lock); 1716 1717 return ret; 1718 } 1719 1720 static int rtl8366rb_dsa_phy_read(struct dsa_switch *ds, int phy, int regnum) 1721 { 1722 return rtl8366rb_phy_read(ds->priv, phy, regnum); 1723 } 1724 1725 static int rtl8366rb_dsa_phy_write(struct dsa_switch *ds, int phy, int regnum, 1726 u16 val) 1727 { 1728 return rtl8366rb_phy_write(ds->priv, phy, regnum, val); 1729 } 1730 1731 static int rtl8366rb_reset_chip(struct realtek_priv *priv) 1732 { 1733 int timeout = 10; 1734 u32 val; 1735 int ret; 1736 1737 priv->write_reg_noack(priv, RTL8366RB_RESET_CTRL_REG, 1738 RTL8366RB_CHIP_CTRL_RESET_HW); 1739 do { 1740 usleep_range(20000, 25000); 1741 ret = regmap_read(priv->map, RTL8366RB_RESET_CTRL_REG, &val); 1742 if (ret) 1743 return ret; 1744 1745 if (!(val & RTL8366RB_CHIP_CTRL_RESET_HW)) 1746 break; 1747 } while (--timeout); 1748 1749 if (!timeout) { 1750 dev_err(priv->dev, "timeout waiting for the switch to reset\n"); 1751 return -EIO; 1752 } 1753 1754 return 0; 1755 } 1756 1757 static int rtl8366rb_detect(struct realtek_priv *priv) 1758 { 1759 struct device *dev = priv->dev; 1760 int ret; 1761 u32 val; 1762 1763 /* Detect device */ 1764 ret = regmap_read(priv->map, 0x5c, &val); 1765 if (ret) { 1766 dev_err(dev, "can't get chip ID (%d)\n", ret); 1767 return ret; 1768 } 1769 1770 switch (val) { 1771 case 0x6027: 1772 dev_info(dev, "found an RTL8366S switch\n"); 1773 dev_err(dev, "this switch is not yet supported, submit patches!\n"); 1774 return -ENODEV; 1775 case 0x5937: 1776 dev_info(dev, "found an RTL8366RB switch\n"); 1777 priv->cpu_port = RTL8366RB_PORT_NUM_CPU; 1778 priv->num_ports = RTL8366RB_NUM_PORTS; 1779 priv->num_vlan_mc = RTL8366RB_NUM_VLANS; 1780 priv->mib_counters = rtl8366rb_mib_counters; 1781 priv->num_mib_counters = ARRAY_SIZE(rtl8366rb_mib_counters); 1782 break; 1783 default: 1784 dev_info(dev, "found an Unknown Realtek switch (id=0x%04x)\n", 1785 val); 1786 break; 1787 } 1788 1789 ret = rtl8366rb_reset_chip(priv); 1790 if (ret) 1791 return ret; 1792 1793 return 0; 1794 } 1795 1796 static const struct dsa_switch_ops rtl8366rb_switch_ops_smi = { 1797 .get_tag_protocol = rtl8366_get_tag_protocol, 1798 .setup = rtl8366rb_setup, 1799 .phylink_mac_link_up = rtl8366rb_mac_link_up, 1800 .phylink_mac_link_down = rtl8366rb_mac_link_down, 1801 .get_strings = rtl8366_get_strings, 1802 .get_ethtool_stats = rtl8366_get_ethtool_stats, 1803 .get_sset_count = rtl8366_get_sset_count, 1804 .port_bridge_join = rtl8366rb_port_bridge_join, 1805 .port_bridge_leave = rtl8366rb_port_bridge_leave, 1806 .port_vlan_filtering = rtl8366rb_vlan_filtering, 1807 .port_vlan_add = rtl8366_vlan_add, 1808 .port_vlan_del = rtl8366_vlan_del, 1809 .port_enable = rtl8366rb_port_enable, 1810 .port_disable = rtl8366rb_port_disable, 1811 .port_pre_bridge_flags = rtl8366rb_port_pre_bridge_flags, 1812 .port_bridge_flags = rtl8366rb_port_bridge_flags, 1813 .port_stp_state_set = rtl8366rb_port_stp_state_set, 1814 .port_fast_age = rtl8366rb_port_fast_age, 1815 .port_change_mtu = rtl8366rb_change_mtu, 1816 .port_max_mtu = rtl8366rb_max_mtu, 1817 }; 1818 1819 static const struct dsa_switch_ops rtl8366rb_switch_ops_mdio = { 1820 .get_tag_protocol = rtl8366_get_tag_protocol, 1821 .setup = rtl8366rb_setup, 1822 .phy_read = rtl8366rb_dsa_phy_read, 1823 .phy_write = rtl8366rb_dsa_phy_write, 1824 .phylink_mac_link_up = rtl8366rb_mac_link_up, 1825 .phylink_mac_link_down = rtl8366rb_mac_link_down, 1826 .get_strings = rtl8366_get_strings, 1827 .get_ethtool_stats = rtl8366_get_ethtool_stats, 1828 .get_sset_count = rtl8366_get_sset_count, 1829 .port_bridge_join = rtl8366rb_port_bridge_join, 1830 .port_bridge_leave = rtl8366rb_port_bridge_leave, 1831 .port_vlan_filtering = rtl8366rb_vlan_filtering, 1832 .port_vlan_add = rtl8366_vlan_add, 1833 .port_vlan_del = rtl8366_vlan_del, 1834 .port_enable = rtl8366rb_port_enable, 1835 .port_disable = rtl8366rb_port_disable, 1836 .port_pre_bridge_flags = rtl8366rb_port_pre_bridge_flags, 1837 .port_bridge_flags = rtl8366rb_port_bridge_flags, 1838 .port_stp_state_set = rtl8366rb_port_stp_state_set, 1839 .port_fast_age = rtl8366rb_port_fast_age, 1840 .port_change_mtu = rtl8366rb_change_mtu, 1841 .port_max_mtu = rtl8366rb_max_mtu, 1842 }; 1843 1844 static const struct realtek_ops rtl8366rb_ops = { 1845 .detect = rtl8366rb_detect, 1846 .get_vlan_mc = rtl8366rb_get_vlan_mc, 1847 .set_vlan_mc = rtl8366rb_set_vlan_mc, 1848 .get_vlan_4k = rtl8366rb_get_vlan_4k, 1849 .set_vlan_4k = rtl8366rb_set_vlan_4k, 1850 .get_mc_index = rtl8366rb_get_mc_index, 1851 .set_mc_index = rtl8366rb_set_mc_index, 1852 .get_mib_counter = rtl8366rb_get_mib_counter, 1853 .is_vlan_valid = rtl8366rb_is_vlan_valid, 1854 .enable_vlan = rtl8366rb_enable_vlan, 1855 .enable_vlan4k = rtl8366rb_enable_vlan4k, 1856 .phy_read = rtl8366rb_phy_read, 1857 .phy_write = rtl8366rb_phy_write, 1858 }; 1859 1860 const struct realtek_variant rtl8366rb_variant = { 1861 .ds_ops_smi = &rtl8366rb_switch_ops_smi, 1862 .ds_ops_mdio = &rtl8366rb_switch_ops_mdio, 1863 .ops = &rtl8366rb_ops, 1864 .clk_delay = 10, 1865 .cmd_read = 0xa9, 1866 .cmd_write = 0xa8, 1867 .chip_data_sz = sizeof(struct rtl8366rb), 1868 }; 1869 EXPORT_SYMBOL_GPL(rtl8366rb_variant); 1870 1871 MODULE_AUTHOR("Linus Walleij <linus.walleij@linaro.org>"); 1872 MODULE_DESCRIPTION("Driver for RTL8366RB ethernet switch"); 1873 MODULE_LICENSE("GPL"); 1874