xref: /openbmc/linux/drivers/net/dsa/mv88e6060.c (revision f3a8b664)
1 /*
2  * net/dsa/mv88e6060.c - Driver for Marvell 88e6060 switch chips
3  * Copyright (c) 2008-2009 Marvell Semiconductor
4  *
5  * This program is free software; you can redistribute it and/or modify
6  * it under the terms of the GNU General Public License as published by
7  * the Free Software Foundation; either version 2 of the License, or
8  * (at your option) any later version.
9  */
10 
11 #include <linux/delay.h>
12 #include <linux/jiffies.h>
13 #include <linux/list.h>
14 #include <linux/module.h>
15 #include <linux/netdevice.h>
16 #include <linux/phy.h>
17 #include <net/dsa.h>
18 #include "mv88e6060.h"
19 
20 static int reg_read(struct dsa_switch *ds, int addr, int reg)
21 {
22 	struct mv88e6060_priv *priv = ds->priv;
23 
24 	return mdiobus_read_nested(priv->bus, priv->sw_addr + addr, reg);
25 }
26 
27 #define REG_READ(addr, reg)					\
28 	({							\
29 		int __ret;					\
30 								\
31 		__ret = reg_read(ds, addr, reg);		\
32 		if (__ret < 0)					\
33 			return __ret;				\
34 		__ret;						\
35 	})
36 
37 
38 static int reg_write(struct dsa_switch *ds, int addr, int reg, u16 val)
39 {
40 	struct mv88e6060_priv *priv = ds->priv;
41 
42 	return mdiobus_write_nested(priv->bus, priv->sw_addr + addr, reg, val);
43 }
44 
45 #define REG_WRITE(addr, reg, val)				\
46 	({							\
47 		int __ret;					\
48 								\
49 		__ret = reg_write(ds, addr, reg, val);		\
50 		if (__ret < 0)					\
51 			return __ret;				\
52 	})
53 
54 static const char *mv88e6060_get_name(struct mii_bus *bus, int sw_addr)
55 {
56 	int ret;
57 
58 	ret = mdiobus_read(bus, sw_addr + REG_PORT(0), PORT_SWITCH_ID);
59 	if (ret >= 0) {
60 		if (ret == PORT_SWITCH_ID_6060)
61 			return "Marvell 88E6060 (A0)";
62 		if (ret == PORT_SWITCH_ID_6060_R1 ||
63 		    ret == PORT_SWITCH_ID_6060_R2)
64 			return "Marvell 88E6060 (B0)";
65 		if ((ret & PORT_SWITCH_ID_6060_MASK) == PORT_SWITCH_ID_6060)
66 			return "Marvell 88E6060";
67 	}
68 
69 	return NULL;
70 }
71 
72 static enum dsa_tag_protocol mv88e6060_get_tag_protocol(struct dsa_switch *ds)
73 {
74 	return DSA_TAG_PROTO_TRAILER;
75 }
76 
77 static const char *mv88e6060_drv_probe(struct device *dsa_dev,
78 				       struct device *host_dev, int sw_addr,
79 				       void **_priv)
80 {
81 	struct mii_bus *bus = dsa_host_dev_to_mii_bus(host_dev);
82 	struct mv88e6060_priv *priv;
83 	const char *name;
84 
85 	name = mv88e6060_get_name(bus, sw_addr);
86 	if (name) {
87 		priv = devm_kzalloc(dsa_dev, sizeof(*priv), GFP_KERNEL);
88 		if (!priv)
89 			return NULL;
90 		*_priv = priv;
91 		priv->bus = bus;
92 		priv->sw_addr = sw_addr;
93 	}
94 
95 	return name;
96 }
97 
98 static int mv88e6060_switch_reset(struct dsa_switch *ds)
99 {
100 	int i;
101 	int ret;
102 	unsigned long timeout;
103 
104 	/* Set all ports to the disabled state. */
105 	for (i = 0; i < MV88E6060_PORTS; i++) {
106 		ret = REG_READ(REG_PORT(i), PORT_CONTROL);
107 		REG_WRITE(REG_PORT(i), PORT_CONTROL,
108 			  ret & ~PORT_CONTROL_STATE_MASK);
109 	}
110 
111 	/* Wait for transmit queues to drain. */
112 	usleep_range(2000, 4000);
113 
114 	/* Reset the switch. */
115 	REG_WRITE(REG_GLOBAL, GLOBAL_ATU_CONTROL,
116 		  GLOBAL_ATU_CONTROL_SWRESET |
117 		  GLOBAL_ATU_CONTROL_ATUSIZE_1024 |
118 		  GLOBAL_ATU_CONTROL_ATE_AGE_5MIN);
119 
120 	/* Wait up to one second for reset to complete. */
121 	timeout = jiffies + 1 * HZ;
122 	while (time_before(jiffies, timeout)) {
123 		ret = REG_READ(REG_GLOBAL, GLOBAL_STATUS);
124 		if (ret & GLOBAL_STATUS_INIT_READY)
125 			break;
126 
127 		usleep_range(1000, 2000);
128 	}
129 	if (time_after(jiffies, timeout))
130 		return -ETIMEDOUT;
131 
132 	return 0;
133 }
134 
135 static int mv88e6060_setup_global(struct dsa_switch *ds)
136 {
137 	/* Disable discarding of frames with excessive collisions,
138 	 * set the maximum frame size to 1536 bytes, and mask all
139 	 * interrupt sources.
140 	 */
141 	REG_WRITE(REG_GLOBAL, GLOBAL_CONTROL, GLOBAL_CONTROL_MAX_FRAME_1536);
142 
143 	/* Enable automatic address learning, set the address
144 	 * database size to 1024 entries, and set the default aging
145 	 * time to 5 minutes.
146 	 */
147 	REG_WRITE(REG_GLOBAL, GLOBAL_ATU_CONTROL,
148 		  GLOBAL_ATU_CONTROL_ATUSIZE_1024 |
149 		  GLOBAL_ATU_CONTROL_ATE_AGE_5MIN);
150 
151 	return 0;
152 }
153 
154 static int mv88e6060_setup_port(struct dsa_switch *ds, int p)
155 {
156 	int addr = REG_PORT(p);
157 
158 	/* Do not force flow control, disable Ingress and Egress
159 	 * Header tagging, disable VLAN tunneling, and set the port
160 	 * state to Forwarding.  Additionally, if this is the CPU
161 	 * port, enable Ingress and Egress Trailer tagging mode.
162 	 */
163 	REG_WRITE(addr, PORT_CONTROL,
164 		  dsa_is_cpu_port(ds, p) ?
165 			PORT_CONTROL_TRAILER |
166 			PORT_CONTROL_INGRESS_MODE |
167 			PORT_CONTROL_STATE_FORWARDING :
168 			PORT_CONTROL_STATE_FORWARDING);
169 
170 	/* Port based VLAN map: give each port its own address
171 	 * database, allow the CPU port to talk to each of the 'real'
172 	 * ports, and allow each of the 'real' ports to only talk to
173 	 * the CPU port.
174 	 */
175 	REG_WRITE(addr, PORT_VLAN_MAP,
176 		  ((p & 0xf) << PORT_VLAN_MAP_DBNUM_SHIFT) |
177 		   (dsa_is_cpu_port(ds, p) ?
178 			ds->enabled_port_mask :
179 			BIT(ds->dst->cpu_port)));
180 
181 	/* Port Association Vector: when learning source addresses
182 	 * of packets, add the address to the address database using
183 	 * a port bitmap that has only the bit for this port set and
184 	 * the other bits clear.
185 	 */
186 	REG_WRITE(addr, PORT_ASSOC_VECTOR, BIT(p));
187 
188 	return 0;
189 }
190 
191 static int mv88e6060_setup(struct dsa_switch *ds)
192 {
193 	int ret;
194 	int i;
195 
196 	ret = mv88e6060_switch_reset(ds);
197 	if (ret < 0)
198 		return ret;
199 
200 	/* @@@ initialise atu */
201 
202 	ret = mv88e6060_setup_global(ds);
203 	if (ret < 0)
204 		return ret;
205 
206 	for (i = 0; i < MV88E6060_PORTS; i++) {
207 		ret = mv88e6060_setup_port(ds, i);
208 		if (ret < 0)
209 			return ret;
210 	}
211 
212 	return 0;
213 }
214 
215 static int mv88e6060_set_addr(struct dsa_switch *ds, u8 *addr)
216 {
217 	/* Use the same MAC Address as FD Pause frames for all ports */
218 	REG_WRITE(REG_GLOBAL, GLOBAL_MAC_01, (addr[0] << 9) | addr[1]);
219 	REG_WRITE(REG_GLOBAL, GLOBAL_MAC_23, (addr[2] << 8) | addr[3]);
220 	REG_WRITE(REG_GLOBAL, GLOBAL_MAC_45, (addr[4] << 8) | addr[5]);
221 
222 	return 0;
223 }
224 
225 static int mv88e6060_port_to_phy_addr(int port)
226 {
227 	if (port >= 0 && port < MV88E6060_PORTS)
228 		return port;
229 	return -1;
230 }
231 
232 static int mv88e6060_phy_read(struct dsa_switch *ds, int port, int regnum)
233 {
234 	int addr;
235 
236 	addr = mv88e6060_port_to_phy_addr(port);
237 	if (addr == -1)
238 		return 0xffff;
239 
240 	return reg_read(ds, addr, regnum);
241 }
242 
243 static int
244 mv88e6060_phy_write(struct dsa_switch *ds, int port, int regnum, u16 val)
245 {
246 	int addr;
247 
248 	addr = mv88e6060_port_to_phy_addr(port);
249 	if (addr == -1)
250 		return 0xffff;
251 
252 	return reg_write(ds, addr, regnum, val);
253 }
254 
255 static struct dsa_switch_ops mv88e6060_switch_ops = {
256 	.get_tag_protocol = mv88e6060_get_tag_protocol,
257 	.probe		= mv88e6060_drv_probe,
258 	.setup		= mv88e6060_setup,
259 	.set_addr	= mv88e6060_set_addr,
260 	.phy_read	= mv88e6060_phy_read,
261 	.phy_write	= mv88e6060_phy_write,
262 };
263 
264 static int __init mv88e6060_init(void)
265 {
266 	register_switch_driver(&mv88e6060_switch_ops);
267 	return 0;
268 }
269 module_init(mv88e6060_init);
270 
271 static void __exit mv88e6060_cleanup(void)
272 {
273 	unregister_switch_driver(&mv88e6060_switch_ops);
274 }
275 module_exit(mv88e6060_cleanup);
276 
277 MODULE_AUTHOR("Lennert Buytenhek <buytenh@wantstofly.org>");
278 MODULE_DESCRIPTION("Driver for Marvell 88E6060 ethernet switch chip");
279 MODULE_LICENSE("GPL");
280 MODULE_ALIAS("platform:mv88e6060");
281