xref: /openbmc/linux/drivers/net/dsa/mv88e6060.c (revision a06c488d)
1 /*
2  * net/dsa/mv88e6060.c - Driver for Marvell 88e6060 switch chips
3  * Copyright (c) 2008-2009 Marvell Semiconductor
4  *
5  * This program is free software; you can redistribute it and/or modify
6  * it under the terms of the GNU General Public License as published by
7  * the Free Software Foundation; either version 2 of the License, or
8  * (at your option) any later version.
9  */
10 
11 #include <linux/delay.h>
12 #include <linux/jiffies.h>
13 #include <linux/list.h>
14 #include <linux/module.h>
15 #include <linux/netdevice.h>
16 #include <linux/phy.h>
17 #include <net/dsa.h>
18 #include "mv88e6060.h"
19 
20 static int reg_read(struct dsa_switch *ds, int addr, int reg)
21 {
22 	struct mii_bus *bus = dsa_host_dev_to_mii_bus(ds->master_dev);
23 
24 	if (bus == NULL)
25 		return -EINVAL;
26 
27 	return mdiobus_read_nested(bus, ds->pd->sw_addr + addr, reg);
28 }
29 
30 #define REG_READ(addr, reg)					\
31 	({							\
32 		int __ret;					\
33 								\
34 		__ret = reg_read(ds, addr, reg);		\
35 		if (__ret < 0)					\
36 			return __ret;				\
37 		__ret;						\
38 	})
39 
40 
41 static int reg_write(struct dsa_switch *ds, int addr, int reg, u16 val)
42 {
43 	struct mii_bus *bus = dsa_host_dev_to_mii_bus(ds->master_dev);
44 
45 	if (bus == NULL)
46 		return -EINVAL;
47 
48 	return mdiobus_write_nested(bus, ds->pd->sw_addr + addr, reg, val);
49 }
50 
51 #define REG_WRITE(addr, reg, val)				\
52 	({							\
53 		int __ret;					\
54 								\
55 		__ret = reg_write(ds, addr, reg, val);		\
56 		if (__ret < 0)					\
57 			return __ret;				\
58 	})
59 
60 static char *mv88e6060_probe(struct device *host_dev, int sw_addr)
61 {
62 	struct mii_bus *bus = dsa_host_dev_to_mii_bus(host_dev);
63 	int ret;
64 
65 	if (bus == NULL)
66 		return NULL;
67 
68 	ret = mdiobus_read(bus, sw_addr + REG_PORT(0), PORT_SWITCH_ID);
69 	if (ret >= 0) {
70 		if (ret == PORT_SWITCH_ID_6060)
71 			return "Marvell 88E6060 (A0)";
72 		if (ret == PORT_SWITCH_ID_6060_R1 ||
73 		    ret == PORT_SWITCH_ID_6060_R2)
74 			return "Marvell 88E6060 (B0)";
75 		if ((ret & PORT_SWITCH_ID_6060_MASK) == PORT_SWITCH_ID_6060)
76 			return "Marvell 88E6060";
77 	}
78 
79 	return NULL;
80 }
81 
82 static int mv88e6060_switch_reset(struct dsa_switch *ds)
83 {
84 	int i;
85 	int ret;
86 	unsigned long timeout;
87 
88 	/* Set all ports to the disabled state. */
89 	for (i = 0; i < MV88E6060_PORTS; i++) {
90 		ret = REG_READ(REG_PORT(i), PORT_CONTROL);
91 		REG_WRITE(REG_PORT(i), PORT_CONTROL,
92 			  ret & ~PORT_CONTROL_STATE_MASK);
93 	}
94 
95 	/* Wait for transmit queues to drain. */
96 	usleep_range(2000, 4000);
97 
98 	/* Reset the switch. */
99 	REG_WRITE(REG_GLOBAL, GLOBAL_ATU_CONTROL,
100 		  GLOBAL_ATU_CONTROL_SWRESET |
101 		  GLOBAL_ATU_CONTROL_ATUSIZE_1024 |
102 		  GLOBAL_ATU_CONTROL_ATE_AGE_5MIN);
103 
104 	/* Wait up to one second for reset to complete. */
105 	timeout = jiffies + 1 * HZ;
106 	while (time_before(jiffies, timeout)) {
107 		ret = REG_READ(REG_GLOBAL, GLOBAL_STATUS);
108 		if (ret & GLOBAL_STATUS_INIT_READY)
109 			break;
110 
111 		usleep_range(1000, 2000);
112 	}
113 	if (time_after(jiffies, timeout))
114 		return -ETIMEDOUT;
115 
116 	return 0;
117 }
118 
119 static int mv88e6060_setup_global(struct dsa_switch *ds)
120 {
121 	/* Disable discarding of frames with excessive collisions,
122 	 * set the maximum frame size to 1536 bytes, and mask all
123 	 * interrupt sources.
124 	 */
125 	REG_WRITE(REG_GLOBAL, GLOBAL_CONTROL, GLOBAL_CONTROL_MAX_FRAME_1536);
126 
127 	/* Enable automatic address learning, set the address
128 	 * database size to 1024 entries, and set the default aging
129 	 * time to 5 minutes.
130 	 */
131 	REG_WRITE(REG_GLOBAL, GLOBAL_ATU_CONTROL,
132 		  GLOBAL_ATU_CONTROL_ATUSIZE_1024 |
133 		  GLOBAL_ATU_CONTROL_ATE_AGE_5MIN);
134 
135 	return 0;
136 }
137 
138 static int mv88e6060_setup_port(struct dsa_switch *ds, int p)
139 {
140 	int addr = REG_PORT(p);
141 
142 	/* Do not force flow control, disable Ingress and Egress
143 	 * Header tagging, disable VLAN tunneling, and set the port
144 	 * state to Forwarding.  Additionally, if this is the CPU
145 	 * port, enable Ingress and Egress Trailer tagging mode.
146 	 */
147 	REG_WRITE(addr, PORT_CONTROL,
148 		  dsa_is_cpu_port(ds, p) ?
149 			PORT_CONTROL_TRAILER |
150 			PORT_CONTROL_INGRESS_MODE |
151 			PORT_CONTROL_STATE_FORWARDING :
152 			PORT_CONTROL_STATE_FORWARDING);
153 
154 	/* Port based VLAN map: give each port its own address
155 	 * database, allow the CPU port to talk to each of the 'real'
156 	 * ports, and allow each of the 'real' ports to only talk to
157 	 * the CPU port.
158 	 */
159 	REG_WRITE(addr, PORT_VLAN_MAP,
160 		  ((p & 0xf) << PORT_VLAN_MAP_DBNUM_SHIFT) |
161 		   (dsa_is_cpu_port(ds, p) ?
162 			ds->phys_port_mask :
163 			BIT(ds->dst->cpu_port)));
164 
165 	/* Port Association Vector: when learning source addresses
166 	 * of packets, add the address to the address database using
167 	 * a port bitmap that has only the bit for this port set and
168 	 * the other bits clear.
169 	 */
170 	REG_WRITE(addr, PORT_ASSOC_VECTOR, BIT(p));
171 
172 	return 0;
173 }
174 
175 static int mv88e6060_setup(struct dsa_switch *ds)
176 {
177 	int i;
178 	int ret;
179 
180 	ret = mv88e6060_switch_reset(ds);
181 	if (ret < 0)
182 		return ret;
183 
184 	/* @@@ initialise atu */
185 
186 	ret = mv88e6060_setup_global(ds);
187 	if (ret < 0)
188 		return ret;
189 
190 	for (i = 0; i < MV88E6060_PORTS; i++) {
191 		ret = mv88e6060_setup_port(ds, i);
192 		if (ret < 0)
193 			return ret;
194 	}
195 
196 	return 0;
197 }
198 
199 static int mv88e6060_set_addr(struct dsa_switch *ds, u8 *addr)
200 {
201 	/* Use the same MAC Address as FD Pause frames for all ports */
202 	REG_WRITE(REG_GLOBAL, GLOBAL_MAC_01, (addr[0] << 9) | addr[1]);
203 	REG_WRITE(REG_GLOBAL, GLOBAL_MAC_23, (addr[2] << 8) | addr[3]);
204 	REG_WRITE(REG_GLOBAL, GLOBAL_MAC_45, (addr[4] << 8) | addr[5]);
205 
206 	return 0;
207 }
208 
209 static int mv88e6060_port_to_phy_addr(int port)
210 {
211 	if (port >= 0 && port < MV88E6060_PORTS)
212 		return port;
213 	return -1;
214 }
215 
216 static int mv88e6060_phy_read(struct dsa_switch *ds, int port, int regnum)
217 {
218 	int addr;
219 
220 	addr = mv88e6060_port_to_phy_addr(port);
221 	if (addr == -1)
222 		return 0xffff;
223 
224 	return reg_read(ds, addr, regnum);
225 }
226 
227 static int
228 mv88e6060_phy_write(struct dsa_switch *ds, int port, int regnum, u16 val)
229 {
230 	int addr;
231 
232 	addr = mv88e6060_port_to_phy_addr(port);
233 	if (addr == -1)
234 		return 0xffff;
235 
236 	return reg_write(ds, addr, regnum, val);
237 }
238 
239 static struct dsa_switch_driver mv88e6060_switch_driver = {
240 	.tag_protocol	= DSA_TAG_PROTO_TRAILER,
241 	.probe		= mv88e6060_probe,
242 	.setup		= mv88e6060_setup,
243 	.set_addr	= mv88e6060_set_addr,
244 	.phy_read	= mv88e6060_phy_read,
245 	.phy_write	= mv88e6060_phy_write,
246 };
247 
248 static int __init mv88e6060_init(void)
249 {
250 	register_switch_driver(&mv88e6060_switch_driver);
251 	return 0;
252 }
253 module_init(mv88e6060_init);
254 
255 static void __exit mv88e6060_cleanup(void)
256 {
257 	unregister_switch_driver(&mv88e6060_switch_driver);
258 }
259 module_exit(mv88e6060_cleanup);
260 
261 MODULE_AUTHOR("Lennert Buytenhek <buytenh@wantstofly.org>");
262 MODULE_DESCRIPTION("Driver for Marvell 88E6060 ethernet switch chip");
263 MODULE_LICENSE("GPL");
264 MODULE_ALIAS("platform:mv88e6060");
265