1 /* 2 * Mediatek MT7530 DSA Switch driver 3 * Copyright (C) 2017 Sean Wang <sean.wang@mediatek.com> 4 * 5 * This program is free software; you can redistribute it and/or modify 6 * it under the terms of the GNU General Public License version 2 as 7 * published by the Free Software Foundation. 8 * 9 * This program is distributed in the hope that it will be useful, 10 * but WITHOUT ANY WARRANTY; without even the implied warranty of 11 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the 12 * GNU General Public License for more details. 13 */ 14 #include <linux/etherdevice.h> 15 #include <linux/if_bridge.h> 16 #include <linux/iopoll.h> 17 #include <linux/mdio.h> 18 #include <linux/mfd/syscon.h> 19 #include <linux/module.h> 20 #include <linux/netdevice.h> 21 #include <linux/of_mdio.h> 22 #include <linux/of_net.h> 23 #include <linux/of_platform.h> 24 #include <linux/phy.h> 25 #include <linux/regmap.h> 26 #include <linux/regulator/consumer.h> 27 #include <linux/reset.h> 28 #include <linux/gpio/consumer.h> 29 #include <net/dsa.h> 30 31 #include "mt7530.h" 32 33 /* String, offset, and register size in bytes if different from 4 bytes */ 34 static const struct mt7530_mib_desc mt7530_mib[] = { 35 MIB_DESC(1, 0x00, "TxDrop"), 36 MIB_DESC(1, 0x04, "TxCrcErr"), 37 MIB_DESC(1, 0x08, "TxUnicast"), 38 MIB_DESC(1, 0x0c, "TxMulticast"), 39 MIB_DESC(1, 0x10, "TxBroadcast"), 40 MIB_DESC(1, 0x14, "TxCollision"), 41 MIB_DESC(1, 0x18, "TxSingleCollision"), 42 MIB_DESC(1, 0x1c, "TxMultipleCollision"), 43 MIB_DESC(1, 0x20, "TxDeferred"), 44 MIB_DESC(1, 0x24, "TxLateCollision"), 45 MIB_DESC(1, 0x28, "TxExcessiveCollistion"), 46 MIB_DESC(1, 0x2c, "TxPause"), 47 MIB_DESC(1, 0x30, "TxPktSz64"), 48 MIB_DESC(1, 0x34, "TxPktSz65To127"), 49 MIB_DESC(1, 0x38, "TxPktSz128To255"), 50 MIB_DESC(1, 0x3c, "TxPktSz256To511"), 51 MIB_DESC(1, 0x40, "TxPktSz512To1023"), 52 MIB_DESC(1, 0x44, "Tx1024ToMax"), 53 MIB_DESC(2, 0x48, "TxBytes"), 54 MIB_DESC(1, 0x60, "RxDrop"), 55 MIB_DESC(1, 0x64, "RxFiltering"), 56 MIB_DESC(1, 0x6c, "RxMulticast"), 57 MIB_DESC(1, 0x70, "RxBroadcast"), 58 MIB_DESC(1, 0x74, "RxAlignErr"), 59 MIB_DESC(1, 0x78, "RxCrcErr"), 60 MIB_DESC(1, 0x7c, "RxUnderSizeErr"), 61 MIB_DESC(1, 0x80, "RxFragErr"), 62 MIB_DESC(1, 0x84, "RxOverSzErr"), 63 MIB_DESC(1, 0x88, "RxJabberErr"), 64 MIB_DESC(1, 0x8c, "RxPause"), 65 MIB_DESC(1, 0x90, "RxPktSz64"), 66 MIB_DESC(1, 0x94, "RxPktSz65To127"), 67 MIB_DESC(1, 0x98, "RxPktSz128To255"), 68 MIB_DESC(1, 0x9c, "RxPktSz256To511"), 69 MIB_DESC(1, 0xa0, "RxPktSz512To1023"), 70 MIB_DESC(1, 0xa4, "RxPktSz1024ToMax"), 71 MIB_DESC(2, 0xa8, "RxBytes"), 72 MIB_DESC(1, 0xb0, "RxCtrlDrop"), 73 MIB_DESC(1, 0xb4, "RxIngressDrop"), 74 MIB_DESC(1, 0xb8, "RxArlDrop"), 75 }; 76 77 static int 78 mt7623_trgmii_write(struct mt7530_priv *priv, u32 reg, u32 val) 79 { 80 int ret; 81 82 ret = regmap_write(priv->ethernet, TRGMII_BASE(reg), val); 83 if (ret < 0) 84 dev_err(priv->dev, 85 "failed to priv write register\n"); 86 return ret; 87 } 88 89 static u32 90 mt7623_trgmii_read(struct mt7530_priv *priv, u32 reg) 91 { 92 int ret; 93 u32 val; 94 95 ret = regmap_read(priv->ethernet, TRGMII_BASE(reg), &val); 96 if (ret < 0) { 97 dev_err(priv->dev, 98 "failed to priv read register\n"); 99 return ret; 100 } 101 102 return val; 103 } 104 105 static void 106 mt7623_trgmii_rmw(struct mt7530_priv *priv, u32 reg, 107 u32 mask, u32 set) 108 { 109 u32 val; 110 111 val = mt7623_trgmii_read(priv, reg); 112 val &= ~mask; 113 val |= set; 114 mt7623_trgmii_write(priv, reg, val); 115 } 116 117 static void 118 mt7623_trgmii_set(struct mt7530_priv *priv, u32 reg, u32 val) 119 { 120 mt7623_trgmii_rmw(priv, reg, 0, val); 121 } 122 123 static void 124 mt7623_trgmii_clear(struct mt7530_priv *priv, u32 reg, u32 val) 125 { 126 mt7623_trgmii_rmw(priv, reg, val, 0); 127 } 128 129 static int 130 core_read_mmd_indirect(struct mt7530_priv *priv, int prtad, int devad) 131 { 132 struct mii_bus *bus = priv->bus; 133 int value, ret; 134 135 /* Write the desired MMD Devad */ 136 ret = bus->write(bus, 0, MII_MMD_CTRL, devad); 137 if (ret < 0) 138 goto err; 139 140 /* Write the desired MMD register address */ 141 ret = bus->write(bus, 0, MII_MMD_DATA, prtad); 142 if (ret < 0) 143 goto err; 144 145 /* Select the Function : DATA with no post increment */ 146 ret = bus->write(bus, 0, MII_MMD_CTRL, (devad | MII_MMD_CTRL_NOINCR)); 147 if (ret < 0) 148 goto err; 149 150 /* Read the content of the MMD's selected register */ 151 value = bus->read(bus, 0, MII_MMD_DATA); 152 153 return value; 154 err: 155 dev_err(&bus->dev, "failed to read mmd register\n"); 156 157 return ret; 158 } 159 160 static int 161 core_write_mmd_indirect(struct mt7530_priv *priv, int prtad, 162 int devad, u32 data) 163 { 164 struct mii_bus *bus = priv->bus; 165 int ret; 166 167 /* Write the desired MMD Devad */ 168 ret = bus->write(bus, 0, MII_MMD_CTRL, devad); 169 if (ret < 0) 170 goto err; 171 172 /* Write the desired MMD register address */ 173 ret = bus->write(bus, 0, MII_MMD_DATA, prtad); 174 if (ret < 0) 175 goto err; 176 177 /* Select the Function : DATA with no post increment */ 178 ret = bus->write(bus, 0, MII_MMD_CTRL, (devad | MII_MMD_CTRL_NOINCR)); 179 if (ret < 0) 180 goto err; 181 182 /* Write the data into MMD's selected register */ 183 ret = bus->write(bus, 0, MII_MMD_DATA, data); 184 err: 185 if (ret < 0) 186 dev_err(&bus->dev, 187 "failed to write mmd register\n"); 188 return ret; 189 } 190 191 static void 192 core_write(struct mt7530_priv *priv, u32 reg, u32 val) 193 { 194 struct mii_bus *bus = priv->bus; 195 196 mutex_lock_nested(&bus->mdio_lock, MDIO_MUTEX_NESTED); 197 198 core_write_mmd_indirect(priv, reg, MDIO_MMD_VEND2, val); 199 200 mutex_unlock(&bus->mdio_lock); 201 } 202 203 static void 204 core_rmw(struct mt7530_priv *priv, u32 reg, u32 mask, u32 set) 205 { 206 struct mii_bus *bus = priv->bus; 207 u32 val; 208 209 mutex_lock_nested(&bus->mdio_lock, MDIO_MUTEX_NESTED); 210 211 val = core_read_mmd_indirect(priv, reg, MDIO_MMD_VEND2); 212 val &= ~mask; 213 val |= set; 214 core_write_mmd_indirect(priv, reg, MDIO_MMD_VEND2, val); 215 216 mutex_unlock(&bus->mdio_lock); 217 } 218 219 static void 220 core_set(struct mt7530_priv *priv, u32 reg, u32 val) 221 { 222 core_rmw(priv, reg, 0, val); 223 } 224 225 static void 226 core_clear(struct mt7530_priv *priv, u32 reg, u32 val) 227 { 228 core_rmw(priv, reg, val, 0); 229 } 230 231 static int 232 mt7530_mii_write(struct mt7530_priv *priv, u32 reg, u32 val) 233 { 234 struct mii_bus *bus = priv->bus; 235 u16 page, r, lo, hi; 236 int ret; 237 238 page = (reg >> 6) & 0x3ff; 239 r = (reg >> 2) & 0xf; 240 lo = val & 0xffff; 241 hi = val >> 16; 242 243 /* MT7530 uses 31 as the pseudo port */ 244 ret = bus->write(bus, 0x1f, 0x1f, page); 245 if (ret < 0) 246 goto err; 247 248 ret = bus->write(bus, 0x1f, r, lo); 249 if (ret < 0) 250 goto err; 251 252 ret = bus->write(bus, 0x1f, 0x10, hi); 253 err: 254 if (ret < 0) 255 dev_err(&bus->dev, 256 "failed to write mt7530 register\n"); 257 return ret; 258 } 259 260 static u32 261 mt7530_mii_read(struct mt7530_priv *priv, u32 reg) 262 { 263 struct mii_bus *bus = priv->bus; 264 u16 page, r, lo, hi; 265 int ret; 266 267 page = (reg >> 6) & 0x3ff; 268 r = (reg >> 2) & 0xf; 269 270 /* MT7530 uses 31 as the pseudo port */ 271 ret = bus->write(bus, 0x1f, 0x1f, page); 272 if (ret < 0) { 273 dev_err(&bus->dev, 274 "failed to read mt7530 register\n"); 275 return ret; 276 } 277 278 lo = bus->read(bus, 0x1f, r); 279 hi = bus->read(bus, 0x1f, 0x10); 280 281 return (hi << 16) | (lo & 0xffff); 282 } 283 284 static void 285 mt7530_write(struct mt7530_priv *priv, u32 reg, u32 val) 286 { 287 struct mii_bus *bus = priv->bus; 288 289 mutex_lock_nested(&bus->mdio_lock, MDIO_MUTEX_NESTED); 290 291 mt7530_mii_write(priv, reg, val); 292 293 mutex_unlock(&bus->mdio_lock); 294 } 295 296 static u32 297 _mt7530_read(struct mt7530_dummy_poll *p) 298 { 299 struct mii_bus *bus = p->priv->bus; 300 u32 val; 301 302 mutex_lock_nested(&bus->mdio_lock, MDIO_MUTEX_NESTED); 303 304 val = mt7530_mii_read(p->priv, p->reg); 305 306 mutex_unlock(&bus->mdio_lock); 307 308 return val; 309 } 310 311 static u32 312 mt7530_read(struct mt7530_priv *priv, u32 reg) 313 { 314 struct mt7530_dummy_poll p; 315 316 INIT_MT7530_DUMMY_POLL(&p, priv, reg); 317 return _mt7530_read(&p); 318 } 319 320 static void 321 mt7530_rmw(struct mt7530_priv *priv, u32 reg, 322 u32 mask, u32 set) 323 { 324 struct mii_bus *bus = priv->bus; 325 u32 val; 326 327 mutex_lock_nested(&bus->mdio_lock, MDIO_MUTEX_NESTED); 328 329 val = mt7530_mii_read(priv, reg); 330 val &= ~mask; 331 val |= set; 332 mt7530_mii_write(priv, reg, val); 333 334 mutex_unlock(&bus->mdio_lock); 335 } 336 337 static void 338 mt7530_set(struct mt7530_priv *priv, u32 reg, u32 val) 339 { 340 mt7530_rmw(priv, reg, 0, val); 341 } 342 343 static void 344 mt7530_clear(struct mt7530_priv *priv, u32 reg, u32 val) 345 { 346 mt7530_rmw(priv, reg, val, 0); 347 } 348 349 static int 350 mt7530_fdb_cmd(struct mt7530_priv *priv, enum mt7530_fdb_cmd cmd, u32 *rsp) 351 { 352 u32 val; 353 int ret; 354 struct mt7530_dummy_poll p; 355 356 /* Set the command operating upon the MAC address entries */ 357 val = ATC_BUSY | ATC_MAT(0) | cmd; 358 mt7530_write(priv, MT7530_ATC, val); 359 360 INIT_MT7530_DUMMY_POLL(&p, priv, MT7530_ATC); 361 ret = readx_poll_timeout(_mt7530_read, &p, val, 362 !(val & ATC_BUSY), 20, 20000); 363 if (ret < 0) { 364 dev_err(priv->dev, "reset timeout\n"); 365 return ret; 366 } 367 368 /* Additional sanity for read command if the specified 369 * entry is invalid 370 */ 371 val = mt7530_read(priv, MT7530_ATC); 372 if ((cmd == MT7530_FDB_READ) && (val & ATC_INVALID)) 373 return -EINVAL; 374 375 if (rsp) 376 *rsp = val; 377 378 return 0; 379 } 380 381 static void 382 mt7530_fdb_read(struct mt7530_priv *priv, struct mt7530_fdb *fdb) 383 { 384 u32 reg[3]; 385 int i; 386 387 /* Read from ARL table into an array */ 388 for (i = 0; i < 3; i++) { 389 reg[i] = mt7530_read(priv, MT7530_TSRA1 + (i * 4)); 390 391 dev_dbg(priv->dev, "%s(%d) reg[%d]=0x%x\n", 392 __func__, __LINE__, i, reg[i]); 393 } 394 395 fdb->vid = (reg[1] >> CVID) & CVID_MASK; 396 fdb->aging = (reg[2] >> AGE_TIMER) & AGE_TIMER_MASK; 397 fdb->port_mask = (reg[2] >> PORT_MAP) & PORT_MAP_MASK; 398 fdb->mac[0] = (reg[0] >> MAC_BYTE_0) & MAC_BYTE_MASK; 399 fdb->mac[1] = (reg[0] >> MAC_BYTE_1) & MAC_BYTE_MASK; 400 fdb->mac[2] = (reg[0] >> MAC_BYTE_2) & MAC_BYTE_MASK; 401 fdb->mac[3] = (reg[0] >> MAC_BYTE_3) & MAC_BYTE_MASK; 402 fdb->mac[4] = (reg[1] >> MAC_BYTE_4) & MAC_BYTE_MASK; 403 fdb->mac[5] = (reg[1] >> MAC_BYTE_5) & MAC_BYTE_MASK; 404 fdb->noarp = ((reg[2] >> ENT_STATUS) & ENT_STATUS_MASK) == STATIC_ENT; 405 } 406 407 static void 408 mt7530_fdb_write(struct mt7530_priv *priv, u16 vid, 409 u8 port_mask, const u8 *mac, 410 u8 aging, u8 type) 411 { 412 u32 reg[3] = { 0 }; 413 int i; 414 415 reg[1] |= vid & CVID_MASK; 416 reg[2] |= (aging & AGE_TIMER_MASK) << AGE_TIMER; 417 reg[2] |= (port_mask & PORT_MAP_MASK) << PORT_MAP; 418 /* STATIC_ENT indicate that entry is static wouldn't 419 * be aged out and STATIC_EMP specified as erasing an 420 * entry 421 */ 422 reg[2] |= (type & ENT_STATUS_MASK) << ENT_STATUS; 423 reg[1] |= mac[5] << MAC_BYTE_5; 424 reg[1] |= mac[4] << MAC_BYTE_4; 425 reg[0] |= mac[3] << MAC_BYTE_3; 426 reg[0] |= mac[2] << MAC_BYTE_2; 427 reg[0] |= mac[1] << MAC_BYTE_1; 428 reg[0] |= mac[0] << MAC_BYTE_0; 429 430 /* Write array into the ARL table */ 431 for (i = 0; i < 3; i++) 432 mt7530_write(priv, MT7530_ATA1 + (i * 4), reg[i]); 433 } 434 435 static int 436 mt7530_pad_clk_setup(struct dsa_switch *ds, int mode) 437 { 438 struct mt7530_priv *priv = ds->priv; 439 u32 ncpo1, ssc_delta, trgint, i; 440 441 switch (mode) { 442 case PHY_INTERFACE_MODE_RGMII: 443 trgint = 0; 444 ncpo1 = 0x0c80; 445 ssc_delta = 0x87; 446 break; 447 case PHY_INTERFACE_MODE_TRGMII: 448 trgint = 1; 449 ncpo1 = 0x1400; 450 ssc_delta = 0x57; 451 break; 452 default: 453 dev_err(priv->dev, "xMII mode %d not supported\n", mode); 454 return -EINVAL; 455 } 456 457 mt7530_rmw(priv, MT7530_P6ECR, P6_INTF_MODE_MASK, 458 P6_INTF_MODE(trgint)); 459 460 /* Lower Tx Driving for TRGMII path */ 461 for (i = 0 ; i < NUM_TRGMII_CTRL ; i++) 462 mt7530_write(priv, MT7530_TRGMII_TD_ODT(i), 463 TD_DM_DRVP(8) | TD_DM_DRVN(8)); 464 465 /* Setup core clock for MT7530 */ 466 if (!trgint) { 467 /* Disable MT7530 core clock */ 468 core_clear(priv, CORE_TRGMII_GSW_CLK_CG, REG_GSWCK_EN); 469 470 /* Disable PLL, since phy_device has not yet been created 471 * provided for phy_[read,write]_mmd_indirect is called, we 472 * provide our own core_write_mmd_indirect to complete this 473 * function. 474 */ 475 core_write_mmd_indirect(priv, 476 CORE_GSWPLL_GRP1, 477 MDIO_MMD_VEND2, 478 0); 479 480 /* Set core clock into 500Mhz */ 481 core_write(priv, CORE_GSWPLL_GRP2, 482 RG_GSWPLL_POSDIV_500M(1) | 483 RG_GSWPLL_FBKDIV_500M(25)); 484 485 /* Enable PLL */ 486 core_write(priv, CORE_GSWPLL_GRP1, 487 RG_GSWPLL_EN_PRE | 488 RG_GSWPLL_POSDIV_200M(2) | 489 RG_GSWPLL_FBKDIV_200M(32)); 490 491 /* Enable MT7530 core clock */ 492 core_set(priv, CORE_TRGMII_GSW_CLK_CG, REG_GSWCK_EN); 493 } 494 495 /* Setup the MT7530 TRGMII Tx Clock */ 496 core_set(priv, CORE_TRGMII_GSW_CLK_CG, REG_GSWCK_EN); 497 core_write(priv, CORE_PLL_GROUP5, RG_LCDDS_PCW_NCPO1(ncpo1)); 498 core_write(priv, CORE_PLL_GROUP6, RG_LCDDS_PCW_NCPO0(0)); 499 core_write(priv, CORE_PLL_GROUP10, RG_LCDDS_SSC_DELTA(ssc_delta)); 500 core_write(priv, CORE_PLL_GROUP11, RG_LCDDS_SSC_DELTA1(ssc_delta)); 501 core_write(priv, CORE_PLL_GROUP4, 502 RG_SYSPLL_DDSFBK_EN | RG_SYSPLL_BIAS_EN | 503 RG_SYSPLL_BIAS_LPF_EN); 504 core_write(priv, CORE_PLL_GROUP2, 505 RG_SYSPLL_EN_NORMAL | RG_SYSPLL_VODEN | 506 RG_SYSPLL_POSDIV(1)); 507 core_write(priv, CORE_PLL_GROUP7, 508 RG_LCDDS_PCW_NCPO_CHG | RG_LCCDS_C(3) | 509 RG_LCDDS_PWDB | RG_LCDDS_ISO_EN); 510 core_set(priv, CORE_TRGMII_GSW_CLK_CG, 511 REG_GSWCK_EN | REG_TRGMIICK_EN); 512 513 if (!trgint) 514 for (i = 0 ; i < NUM_TRGMII_CTRL; i++) 515 mt7530_rmw(priv, MT7530_TRGMII_RD(i), 516 RD_TAP_MASK, RD_TAP(16)); 517 else 518 mt7623_trgmii_set(priv, GSW_INTF_MODE, INTF_MODE_TRGMII); 519 520 return 0; 521 } 522 523 static int 524 mt7623_pad_clk_setup(struct dsa_switch *ds) 525 { 526 struct mt7530_priv *priv = ds->priv; 527 int i; 528 529 for (i = 0 ; i < NUM_TRGMII_CTRL; i++) 530 mt7623_trgmii_write(priv, GSW_TRGMII_TD_ODT(i), 531 TD_DM_DRVP(8) | TD_DM_DRVN(8)); 532 533 mt7623_trgmii_set(priv, GSW_TRGMII_RCK_CTRL, RX_RST | RXC_DQSISEL); 534 mt7623_trgmii_clear(priv, GSW_TRGMII_RCK_CTRL, RX_RST); 535 536 return 0; 537 } 538 539 static void 540 mt7530_mib_reset(struct dsa_switch *ds) 541 { 542 struct mt7530_priv *priv = ds->priv; 543 544 mt7530_write(priv, MT7530_MIB_CCR, CCR_MIB_FLUSH); 545 mt7530_write(priv, MT7530_MIB_CCR, CCR_MIB_ACTIVATE); 546 } 547 548 static void 549 mt7530_port_set_status(struct mt7530_priv *priv, int port, int enable) 550 { 551 u32 mask = PMCR_TX_EN | PMCR_RX_EN; 552 553 if (enable) 554 mt7530_set(priv, MT7530_PMCR_P(port), mask); 555 else 556 mt7530_clear(priv, MT7530_PMCR_P(port), mask); 557 } 558 559 static int mt7530_phy_read(struct dsa_switch *ds, int port, int regnum) 560 { 561 struct mt7530_priv *priv = ds->priv; 562 563 return mdiobus_read_nested(priv->bus, port, regnum); 564 } 565 566 static int mt7530_phy_write(struct dsa_switch *ds, int port, int regnum, 567 u16 val) 568 { 569 struct mt7530_priv *priv = ds->priv; 570 571 return mdiobus_write_nested(priv->bus, port, regnum, val); 572 } 573 574 static void 575 mt7530_get_strings(struct dsa_switch *ds, int port, u32 stringset, 576 uint8_t *data) 577 { 578 int i; 579 580 if (stringset != ETH_SS_STATS) 581 return; 582 583 for (i = 0; i < ARRAY_SIZE(mt7530_mib); i++) 584 strncpy(data + i * ETH_GSTRING_LEN, mt7530_mib[i].name, 585 ETH_GSTRING_LEN); 586 } 587 588 static void 589 mt7530_get_ethtool_stats(struct dsa_switch *ds, int port, 590 uint64_t *data) 591 { 592 struct mt7530_priv *priv = ds->priv; 593 const struct mt7530_mib_desc *mib; 594 u32 reg, i; 595 u64 hi; 596 597 for (i = 0; i < ARRAY_SIZE(mt7530_mib); i++) { 598 mib = &mt7530_mib[i]; 599 reg = MT7530_PORT_MIB_COUNTER(port) + mib->offset; 600 601 data[i] = mt7530_read(priv, reg); 602 if (mib->size == 2) { 603 hi = mt7530_read(priv, reg + 4); 604 data[i] |= hi << 32; 605 } 606 } 607 } 608 609 static int 610 mt7530_get_sset_count(struct dsa_switch *ds, int port, int sset) 611 { 612 if (sset != ETH_SS_STATS) 613 return 0; 614 615 return ARRAY_SIZE(mt7530_mib); 616 } 617 618 static void mt7530_adjust_link(struct dsa_switch *ds, int port, 619 struct phy_device *phydev) 620 { 621 struct mt7530_priv *priv = ds->priv; 622 623 if (phy_is_pseudo_fixed_link(phydev)) { 624 if (priv->id == ID_MT7530) { 625 dev_dbg(priv->dev, "phy-mode for master device = %x\n", 626 phydev->interface); 627 628 /* Setup TX circuit incluing relevant PAD and driving */ 629 mt7530_pad_clk_setup(ds, phydev->interface); 630 631 /* Setup RX circuit, relevant PAD and driving on the 632 * host which must be placed after the setup on the 633 * device side is all finished. 634 */ 635 mt7623_pad_clk_setup(ds); 636 } 637 } else { 638 u16 lcl_adv = 0, rmt_adv = 0; 639 u8 flowctrl; 640 u32 mcr = PMCR_USERP_LINK | PMCR_FORCE_MODE; 641 642 switch (phydev->speed) { 643 case SPEED_1000: 644 mcr |= PMCR_FORCE_SPEED_1000; 645 break; 646 case SPEED_100: 647 mcr |= PMCR_FORCE_SPEED_100; 648 break; 649 } 650 651 if (phydev->link) 652 mcr |= PMCR_FORCE_LNK; 653 654 if (phydev->duplex) { 655 mcr |= PMCR_FORCE_FDX; 656 657 if (phydev->pause) 658 rmt_adv = LPA_PAUSE_CAP; 659 if (phydev->asym_pause) 660 rmt_adv |= LPA_PAUSE_ASYM; 661 662 lcl_adv = linkmode_adv_to_lcl_adv_t( 663 phydev->advertising); 664 flowctrl = mii_resolve_flowctrl_fdx(lcl_adv, rmt_adv); 665 666 if (flowctrl & FLOW_CTRL_TX) 667 mcr |= PMCR_TX_FC_EN; 668 if (flowctrl & FLOW_CTRL_RX) 669 mcr |= PMCR_RX_FC_EN; 670 } 671 mt7530_write(priv, MT7530_PMCR_P(port), mcr); 672 } 673 } 674 675 static int 676 mt7530_cpu_port_enable(struct mt7530_priv *priv, 677 int port) 678 { 679 /* Enable Mediatek header mode on the cpu port */ 680 mt7530_write(priv, MT7530_PVC_P(port), 681 PORT_SPEC_TAG); 682 683 /* Setup the MAC by default for the cpu port */ 684 mt7530_write(priv, MT7530_PMCR_P(port), PMCR_CPUP_LINK); 685 686 /* Disable auto learning on the cpu port */ 687 mt7530_set(priv, MT7530_PSC_P(port), SA_DIS); 688 689 /* Unknown unicast frame fordwarding to the cpu port */ 690 mt7530_set(priv, MT7530_MFC, UNU_FFP(BIT(port))); 691 692 /* Set CPU port number */ 693 if (priv->id == ID_MT7621) 694 mt7530_rmw(priv, MT7530_MFC, CPU_MASK, CPU_EN | CPU_PORT(port)); 695 696 /* CPU port gets connected to all user ports of 697 * the switch 698 */ 699 mt7530_write(priv, MT7530_PCR_P(port), 700 PCR_MATRIX(dsa_user_ports(priv->ds))); 701 702 return 0; 703 } 704 705 static int 706 mt7530_port_enable(struct dsa_switch *ds, int port, 707 struct phy_device *phy) 708 { 709 struct mt7530_priv *priv = ds->priv; 710 711 mutex_lock(&priv->reg_mutex); 712 713 /* Setup the MAC for the user port */ 714 mt7530_write(priv, MT7530_PMCR_P(port), PMCR_USERP_LINK); 715 716 /* Allow the user port gets connected to the cpu port and also 717 * restore the port matrix if the port is the member of a certain 718 * bridge. 719 */ 720 priv->ports[port].pm |= PCR_MATRIX(BIT(MT7530_CPU_PORT)); 721 priv->ports[port].enable = true; 722 mt7530_rmw(priv, MT7530_PCR_P(port), PCR_MATRIX_MASK, 723 priv->ports[port].pm); 724 mt7530_port_set_status(priv, port, 1); 725 726 mutex_unlock(&priv->reg_mutex); 727 728 return 0; 729 } 730 731 static void 732 mt7530_port_disable(struct dsa_switch *ds, int port) 733 { 734 struct mt7530_priv *priv = ds->priv; 735 736 mutex_lock(&priv->reg_mutex); 737 738 /* Clear up all port matrix which could be restored in the next 739 * enablement for the port. 740 */ 741 priv->ports[port].enable = false; 742 mt7530_rmw(priv, MT7530_PCR_P(port), PCR_MATRIX_MASK, 743 PCR_MATRIX_CLR); 744 mt7530_port_set_status(priv, port, 0); 745 746 mutex_unlock(&priv->reg_mutex); 747 } 748 749 static void 750 mt7530_stp_state_set(struct dsa_switch *ds, int port, u8 state) 751 { 752 struct mt7530_priv *priv = ds->priv; 753 u32 stp_state; 754 755 switch (state) { 756 case BR_STATE_DISABLED: 757 stp_state = MT7530_STP_DISABLED; 758 break; 759 case BR_STATE_BLOCKING: 760 stp_state = MT7530_STP_BLOCKING; 761 break; 762 case BR_STATE_LISTENING: 763 stp_state = MT7530_STP_LISTENING; 764 break; 765 case BR_STATE_LEARNING: 766 stp_state = MT7530_STP_LEARNING; 767 break; 768 case BR_STATE_FORWARDING: 769 default: 770 stp_state = MT7530_STP_FORWARDING; 771 break; 772 } 773 774 mt7530_rmw(priv, MT7530_SSP_P(port), FID_PST_MASK, stp_state); 775 } 776 777 static int 778 mt7530_port_bridge_join(struct dsa_switch *ds, int port, 779 struct net_device *bridge) 780 { 781 struct mt7530_priv *priv = ds->priv; 782 u32 port_bitmap = BIT(MT7530_CPU_PORT); 783 int i; 784 785 mutex_lock(&priv->reg_mutex); 786 787 for (i = 0; i < MT7530_NUM_PORTS; i++) { 788 /* Add this port to the port matrix of the other ports in the 789 * same bridge. If the port is disabled, port matrix is kept 790 * and not being setup until the port becomes enabled. 791 */ 792 if (dsa_is_user_port(ds, i) && i != port) { 793 if (dsa_to_port(ds, i)->bridge_dev != bridge) 794 continue; 795 if (priv->ports[i].enable) 796 mt7530_set(priv, MT7530_PCR_P(i), 797 PCR_MATRIX(BIT(port))); 798 priv->ports[i].pm |= PCR_MATRIX(BIT(port)); 799 800 port_bitmap |= BIT(i); 801 } 802 } 803 804 /* Add the all other ports to this port matrix. */ 805 if (priv->ports[port].enable) 806 mt7530_rmw(priv, MT7530_PCR_P(port), 807 PCR_MATRIX_MASK, PCR_MATRIX(port_bitmap)); 808 priv->ports[port].pm |= PCR_MATRIX(port_bitmap); 809 810 mutex_unlock(&priv->reg_mutex); 811 812 return 0; 813 } 814 815 static void 816 mt7530_port_set_vlan_unaware(struct dsa_switch *ds, int port) 817 { 818 struct mt7530_priv *priv = ds->priv; 819 bool all_user_ports_removed = true; 820 int i; 821 822 /* When a port is removed from the bridge, the port would be set up 823 * back to the default as is at initial boot which is a VLAN-unaware 824 * port. 825 */ 826 mt7530_rmw(priv, MT7530_PCR_P(port), PCR_PORT_VLAN_MASK, 827 MT7530_PORT_MATRIX_MODE); 828 mt7530_rmw(priv, MT7530_PVC_P(port), VLAN_ATTR_MASK, 829 VLAN_ATTR(MT7530_VLAN_TRANSPARENT)); 830 831 priv->ports[port].vlan_filtering = false; 832 833 for (i = 0; i < MT7530_NUM_PORTS; i++) { 834 if (dsa_is_user_port(ds, i) && 835 priv->ports[i].vlan_filtering) { 836 all_user_ports_removed = false; 837 break; 838 } 839 } 840 841 /* CPU port also does the same thing until all user ports belonging to 842 * the CPU port get out of VLAN filtering mode. 843 */ 844 if (all_user_ports_removed) { 845 mt7530_write(priv, MT7530_PCR_P(MT7530_CPU_PORT), 846 PCR_MATRIX(dsa_user_ports(priv->ds))); 847 mt7530_write(priv, MT7530_PVC_P(MT7530_CPU_PORT), 848 PORT_SPEC_TAG); 849 } 850 } 851 852 static void 853 mt7530_port_set_vlan_aware(struct dsa_switch *ds, int port) 854 { 855 struct mt7530_priv *priv = ds->priv; 856 857 /* The real fabric path would be decided on the membership in the 858 * entry of VLAN table. PCR_MATRIX set up here with ALL_MEMBERS 859 * means potential VLAN can be consisting of certain subset of all 860 * ports. 861 */ 862 mt7530_rmw(priv, MT7530_PCR_P(port), 863 PCR_MATRIX_MASK, PCR_MATRIX(MT7530_ALL_MEMBERS)); 864 865 /* Trapped into security mode allows packet forwarding through VLAN 866 * table lookup. 867 */ 868 mt7530_rmw(priv, MT7530_PCR_P(port), PCR_PORT_VLAN_MASK, 869 MT7530_PORT_SECURITY_MODE); 870 871 /* Set the port as a user port which is to be able to recognize VID 872 * from incoming packets before fetching entry within the VLAN table. 873 */ 874 mt7530_rmw(priv, MT7530_PVC_P(port), VLAN_ATTR_MASK, 875 VLAN_ATTR(MT7530_VLAN_USER)); 876 } 877 878 static void 879 mt7530_port_bridge_leave(struct dsa_switch *ds, int port, 880 struct net_device *bridge) 881 { 882 struct mt7530_priv *priv = ds->priv; 883 int i; 884 885 mutex_lock(&priv->reg_mutex); 886 887 for (i = 0; i < MT7530_NUM_PORTS; i++) { 888 /* Remove this port from the port matrix of the other ports 889 * in the same bridge. If the port is disabled, port matrix 890 * is kept and not being setup until the port becomes enabled. 891 * And the other port's port matrix cannot be broken when the 892 * other port is still a VLAN-aware port. 893 */ 894 if (!priv->ports[i].vlan_filtering && 895 dsa_is_user_port(ds, i) && i != port) { 896 if (dsa_to_port(ds, i)->bridge_dev != bridge) 897 continue; 898 if (priv->ports[i].enable) 899 mt7530_clear(priv, MT7530_PCR_P(i), 900 PCR_MATRIX(BIT(port))); 901 priv->ports[i].pm &= ~PCR_MATRIX(BIT(port)); 902 } 903 } 904 905 /* Set the cpu port to be the only one in the port matrix of 906 * this port. 907 */ 908 if (priv->ports[port].enable) 909 mt7530_rmw(priv, MT7530_PCR_P(port), PCR_MATRIX_MASK, 910 PCR_MATRIX(BIT(MT7530_CPU_PORT))); 911 priv->ports[port].pm = PCR_MATRIX(BIT(MT7530_CPU_PORT)); 912 913 mt7530_port_set_vlan_unaware(ds, port); 914 915 mutex_unlock(&priv->reg_mutex); 916 } 917 918 static int 919 mt7530_port_fdb_add(struct dsa_switch *ds, int port, 920 const unsigned char *addr, u16 vid) 921 { 922 struct mt7530_priv *priv = ds->priv; 923 int ret; 924 u8 port_mask = BIT(port); 925 926 mutex_lock(&priv->reg_mutex); 927 mt7530_fdb_write(priv, vid, port_mask, addr, -1, STATIC_ENT); 928 ret = mt7530_fdb_cmd(priv, MT7530_FDB_WRITE, NULL); 929 mutex_unlock(&priv->reg_mutex); 930 931 return ret; 932 } 933 934 static int 935 mt7530_port_fdb_del(struct dsa_switch *ds, int port, 936 const unsigned char *addr, u16 vid) 937 { 938 struct mt7530_priv *priv = ds->priv; 939 int ret; 940 u8 port_mask = BIT(port); 941 942 mutex_lock(&priv->reg_mutex); 943 mt7530_fdb_write(priv, vid, port_mask, addr, -1, STATIC_EMP); 944 ret = mt7530_fdb_cmd(priv, MT7530_FDB_WRITE, NULL); 945 mutex_unlock(&priv->reg_mutex); 946 947 return ret; 948 } 949 950 static int 951 mt7530_port_fdb_dump(struct dsa_switch *ds, int port, 952 dsa_fdb_dump_cb_t *cb, void *data) 953 { 954 struct mt7530_priv *priv = ds->priv; 955 struct mt7530_fdb _fdb = { 0 }; 956 int cnt = MT7530_NUM_FDB_RECORDS; 957 int ret = 0; 958 u32 rsp = 0; 959 960 mutex_lock(&priv->reg_mutex); 961 962 ret = mt7530_fdb_cmd(priv, MT7530_FDB_START, &rsp); 963 if (ret < 0) 964 goto err; 965 966 do { 967 if (rsp & ATC_SRCH_HIT) { 968 mt7530_fdb_read(priv, &_fdb); 969 if (_fdb.port_mask & BIT(port)) { 970 ret = cb(_fdb.mac, _fdb.vid, _fdb.noarp, 971 data); 972 if (ret < 0) 973 break; 974 } 975 } 976 } while (--cnt && 977 !(rsp & ATC_SRCH_END) && 978 !mt7530_fdb_cmd(priv, MT7530_FDB_NEXT, &rsp)); 979 err: 980 mutex_unlock(&priv->reg_mutex); 981 982 return 0; 983 } 984 985 static int 986 mt7530_vlan_cmd(struct mt7530_priv *priv, enum mt7530_vlan_cmd cmd, u16 vid) 987 { 988 struct mt7530_dummy_poll p; 989 u32 val; 990 int ret; 991 992 val = VTCR_BUSY | VTCR_FUNC(cmd) | vid; 993 mt7530_write(priv, MT7530_VTCR, val); 994 995 INIT_MT7530_DUMMY_POLL(&p, priv, MT7530_VTCR); 996 ret = readx_poll_timeout(_mt7530_read, &p, val, 997 !(val & VTCR_BUSY), 20, 20000); 998 if (ret < 0) { 999 dev_err(priv->dev, "poll timeout\n"); 1000 return ret; 1001 } 1002 1003 val = mt7530_read(priv, MT7530_VTCR); 1004 if (val & VTCR_INVALID) { 1005 dev_err(priv->dev, "read VTCR invalid\n"); 1006 return -EINVAL; 1007 } 1008 1009 return 0; 1010 } 1011 1012 static int 1013 mt7530_port_vlan_filtering(struct dsa_switch *ds, int port, 1014 bool vlan_filtering) 1015 { 1016 struct mt7530_priv *priv = ds->priv; 1017 1018 priv->ports[port].vlan_filtering = vlan_filtering; 1019 1020 if (vlan_filtering) { 1021 /* The port is being kept as VLAN-unaware port when bridge is 1022 * set up with vlan_filtering not being set, Otherwise, the 1023 * port and the corresponding CPU port is required the setup 1024 * for becoming a VLAN-aware port. 1025 */ 1026 mt7530_port_set_vlan_aware(ds, port); 1027 mt7530_port_set_vlan_aware(ds, MT7530_CPU_PORT); 1028 } 1029 1030 return 0; 1031 } 1032 1033 static int 1034 mt7530_port_vlan_prepare(struct dsa_switch *ds, int port, 1035 const struct switchdev_obj_port_vlan *vlan) 1036 { 1037 /* nothing needed */ 1038 1039 return 0; 1040 } 1041 1042 static void 1043 mt7530_hw_vlan_add(struct mt7530_priv *priv, 1044 struct mt7530_hw_vlan_entry *entry) 1045 { 1046 u8 new_members; 1047 u32 val; 1048 1049 new_members = entry->old_members | BIT(entry->port) | 1050 BIT(MT7530_CPU_PORT); 1051 1052 /* Validate the entry with independent learning, create egress tag per 1053 * VLAN and joining the port as one of the port members. 1054 */ 1055 val = IVL_MAC | VTAG_EN | PORT_MEM(new_members) | VLAN_VALID; 1056 mt7530_write(priv, MT7530_VAWD1, val); 1057 1058 /* Decide whether adding tag or not for those outgoing packets from the 1059 * port inside the VLAN. 1060 */ 1061 val = entry->untagged ? MT7530_VLAN_EGRESS_UNTAG : 1062 MT7530_VLAN_EGRESS_TAG; 1063 mt7530_rmw(priv, MT7530_VAWD2, 1064 ETAG_CTRL_P_MASK(entry->port), 1065 ETAG_CTRL_P(entry->port, val)); 1066 1067 /* CPU port is always taken as a tagged port for serving more than one 1068 * VLANs across and also being applied with egress type stack mode for 1069 * that VLAN tags would be appended after hardware special tag used as 1070 * DSA tag. 1071 */ 1072 mt7530_rmw(priv, MT7530_VAWD2, 1073 ETAG_CTRL_P_MASK(MT7530_CPU_PORT), 1074 ETAG_CTRL_P(MT7530_CPU_PORT, 1075 MT7530_VLAN_EGRESS_STACK)); 1076 } 1077 1078 static void 1079 mt7530_hw_vlan_del(struct mt7530_priv *priv, 1080 struct mt7530_hw_vlan_entry *entry) 1081 { 1082 u8 new_members; 1083 u32 val; 1084 1085 new_members = entry->old_members & ~BIT(entry->port); 1086 1087 val = mt7530_read(priv, MT7530_VAWD1); 1088 if (!(val & VLAN_VALID)) { 1089 dev_err(priv->dev, 1090 "Cannot be deleted due to invalid entry\n"); 1091 return; 1092 } 1093 1094 /* If certain member apart from CPU port is still alive in the VLAN, 1095 * the entry would be kept valid. Otherwise, the entry is got to be 1096 * disabled. 1097 */ 1098 if (new_members && new_members != BIT(MT7530_CPU_PORT)) { 1099 val = IVL_MAC | VTAG_EN | PORT_MEM(new_members) | 1100 VLAN_VALID; 1101 mt7530_write(priv, MT7530_VAWD1, val); 1102 } else { 1103 mt7530_write(priv, MT7530_VAWD1, 0); 1104 mt7530_write(priv, MT7530_VAWD2, 0); 1105 } 1106 } 1107 1108 static void 1109 mt7530_hw_vlan_update(struct mt7530_priv *priv, u16 vid, 1110 struct mt7530_hw_vlan_entry *entry, 1111 mt7530_vlan_op vlan_op) 1112 { 1113 u32 val; 1114 1115 /* Fetch entry */ 1116 mt7530_vlan_cmd(priv, MT7530_VTCR_RD_VID, vid); 1117 1118 val = mt7530_read(priv, MT7530_VAWD1); 1119 1120 entry->old_members = (val >> PORT_MEM_SHFT) & PORT_MEM_MASK; 1121 1122 /* Manipulate entry */ 1123 vlan_op(priv, entry); 1124 1125 /* Flush result to hardware */ 1126 mt7530_vlan_cmd(priv, MT7530_VTCR_WR_VID, vid); 1127 } 1128 1129 static void 1130 mt7530_port_vlan_add(struct dsa_switch *ds, int port, 1131 const struct switchdev_obj_port_vlan *vlan) 1132 { 1133 bool untagged = vlan->flags & BRIDGE_VLAN_INFO_UNTAGGED; 1134 bool pvid = vlan->flags & BRIDGE_VLAN_INFO_PVID; 1135 struct mt7530_hw_vlan_entry new_entry; 1136 struct mt7530_priv *priv = ds->priv; 1137 u16 vid; 1138 1139 /* The port is kept as VLAN-unaware if bridge with vlan_filtering not 1140 * being set. 1141 */ 1142 if (!priv->ports[port].vlan_filtering) 1143 return; 1144 1145 mutex_lock(&priv->reg_mutex); 1146 1147 for (vid = vlan->vid_begin; vid <= vlan->vid_end; ++vid) { 1148 mt7530_hw_vlan_entry_init(&new_entry, port, untagged); 1149 mt7530_hw_vlan_update(priv, vid, &new_entry, 1150 mt7530_hw_vlan_add); 1151 } 1152 1153 if (pvid) { 1154 mt7530_rmw(priv, MT7530_PPBV1_P(port), G0_PORT_VID_MASK, 1155 G0_PORT_VID(vlan->vid_end)); 1156 priv->ports[port].pvid = vlan->vid_end; 1157 } 1158 1159 mutex_unlock(&priv->reg_mutex); 1160 } 1161 1162 static int 1163 mt7530_port_vlan_del(struct dsa_switch *ds, int port, 1164 const struct switchdev_obj_port_vlan *vlan) 1165 { 1166 struct mt7530_hw_vlan_entry target_entry; 1167 struct mt7530_priv *priv = ds->priv; 1168 u16 vid, pvid; 1169 1170 /* The port is kept as VLAN-unaware if bridge with vlan_filtering not 1171 * being set. 1172 */ 1173 if (!priv->ports[port].vlan_filtering) 1174 return 0; 1175 1176 mutex_lock(&priv->reg_mutex); 1177 1178 pvid = priv->ports[port].pvid; 1179 for (vid = vlan->vid_begin; vid <= vlan->vid_end; ++vid) { 1180 mt7530_hw_vlan_entry_init(&target_entry, port, 0); 1181 mt7530_hw_vlan_update(priv, vid, &target_entry, 1182 mt7530_hw_vlan_del); 1183 1184 /* PVID is being restored to the default whenever the PVID port 1185 * is being removed from the VLAN. 1186 */ 1187 if (pvid == vid) 1188 pvid = G0_PORT_VID_DEF; 1189 } 1190 1191 mt7530_rmw(priv, MT7530_PPBV1_P(port), G0_PORT_VID_MASK, pvid); 1192 priv->ports[port].pvid = pvid; 1193 1194 mutex_unlock(&priv->reg_mutex); 1195 1196 return 0; 1197 } 1198 1199 static enum dsa_tag_protocol 1200 mtk_get_tag_protocol(struct dsa_switch *ds, int port) 1201 { 1202 struct mt7530_priv *priv = ds->priv; 1203 1204 if (port != MT7530_CPU_PORT) { 1205 dev_warn(priv->dev, 1206 "port not matched with tagging CPU port\n"); 1207 return DSA_TAG_PROTO_NONE; 1208 } else { 1209 return DSA_TAG_PROTO_MTK; 1210 } 1211 } 1212 1213 static int 1214 mt7530_setup(struct dsa_switch *ds) 1215 { 1216 struct mt7530_priv *priv = ds->priv; 1217 int ret, i; 1218 u32 id, val; 1219 struct device_node *dn; 1220 struct mt7530_dummy_poll p; 1221 1222 /* The parent node of master netdev which holds the common system 1223 * controller also is the container for two GMACs nodes representing 1224 * as two netdev instances. 1225 */ 1226 dn = ds->ports[MT7530_CPU_PORT].master->dev.of_node->parent; 1227 1228 if (priv->id == ID_MT7530) { 1229 priv->ethernet = syscon_node_to_regmap(dn); 1230 if (IS_ERR(priv->ethernet)) 1231 return PTR_ERR(priv->ethernet); 1232 1233 regulator_set_voltage(priv->core_pwr, 1000000, 1000000); 1234 ret = regulator_enable(priv->core_pwr); 1235 if (ret < 0) { 1236 dev_err(priv->dev, 1237 "Failed to enable core power: %d\n", ret); 1238 return ret; 1239 } 1240 1241 regulator_set_voltage(priv->io_pwr, 3300000, 3300000); 1242 ret = regulator_enable(priv->io_pwr); 1243 if (ret < 0) { 1244 dev_err(priv->dev, "Failed to enable io pwr: %d\n", 1245 ret); 1246 return ret; 1247 } 1248 } 1249 1250 /* Reset whole chip through gpio pin or memory-mapped registers for 1251 * different type of hardware 1252 */ 1253 if (priv->mcm) { 1254 reset_control_assert(priv->rstc); 1255 usleep_range(1000, 1100); 1256 reset_control_deassert(priv->rstc); 1257 } else { 1258 gpiod_set_value_cansleep(priv->reset, 0); 1259 usleep_range(1000, 1100); 1260 gpiod_set_value_cansleep(priv->reset, 1); 1261 } 1262 1263 /* Waiting for MT7530 got to stable */ 1264 INIT_MT7530_DUMMY_POLL(&p, priv, MT7530_HWTRAP); 1265 ret = readx_poll_timeout(_mt7530_read, &p, val, val != 0, 1266 20, 1000000); 1267 if (ret < 0) { 1268 dev_err(priv->dev, "reset timeout\n"); 1269 return ret; 1270 } 1271 1272 id = mt7530_read(priv, MT7530_CREV); 1273 id >>= CHIP_NAME_SHIFT; 1274 if (id != MT7530_ID) { 1275 dev_err(priv->dev, "chip %x can't be supported\n", id); 1276 return -ENODEV; 1277 } 1278 1279 /* Reset the switch through internal reset */ 1280 mt7530_write(priv, MT7530_SYS_CTRL, 1281 SYS_CTRL_PHY_RST | SYS_CTRL_SW_RST | 1282 SYS_CTRL_REG_RST); 1283 1284 /* Enable Port 6 only; P5 as GMAC5 which currently is not supported */ 1285 val = mt7530_read(priv, MT7530_MHWTRAP); 1286 val &= ~MHWTRAP_P6_DIS & ~MHWTRAP_PHY_ACCESS; 1287 val |= MHWTRAP_MANUAL; 1288 mt7530_write(priv, MT7530_MHWTRAP, val); 1289 1290 /* Enable and reset MIB counters */ 1291 mt7530_mib_reset(ds); 1292 1293 mt7530_clear(priv, MT7530_MFC, UNU_FFP_MASK); 1294 1295 for (i = 0; i < MT7530_NUM_PORTS; i++) { 1296 /* Disable forwarding by default on all ports */ 1297 mt7530_rmw(priv, MT7530_PCR_P(i), PCR_MATRIX_MASK, 1298 PCR_MATRIX_CLR); 1299 1300 if (dsa_is_cpu_port(ds, i)) 1301 mt7530_cpu_port_enable(priv, i); 1302 else 1303 mt7530_port_disable(ds, i); 1304 } 1305 1306 /* Flush the FDB table */ 1307 ret = mt7530_fdb_cmd(priv, MT7530_FDB_FLUSH, NULL); 1308 if (ret < 0) 1309 return ret; 1310 1311 return 0; 1312 } 1313 1314 static const struct dsa_switch_ops mt7530_switch_ops = { 1315 .get_tag_protocol = mtk_get_tag_protocol, 1316 .setup = mt7530_setup, 1317 .get_strings = mt7530_get_strings, 1318 .phy_read = mt7530_phy_read, 1319 .phy_write = mt7530_phy_write, 1320 .get_ethtool_stats = mt7530_get_ethtool_stats, 1321 .get_sset_count = mt7530_get_sset_count, 1322 .adjust_link = mt7530_adjust_link, 1323 .port_enable = mt7530_port_enable, 1324 .port_disable = mt7530_port_disable, 1325 .port_stp_state_set = mt7530_stp_state_set, 1326 .port_bridge_join = mt7530_port_bridge_join, 1327 .port_bridge_leave = mt7530_port_bridge_leave, 1328 .port_fdb_add = mt7530_port_fdb_add, 1329 .port_fdb_del = mt7530_port_fdb_del, 1330 .port_fdb_dump = mt7530_port_fdb_dump, 1331 .port_vlan_filtering = mt7530_port_vlan_filtering, 1332 .port_vlan_prepare = mt7530_port_vlan_prepare, 1333 .port_vlan_add = mt7530_port_vlan_add, 1334 .port_vlan_del = mt7530_port_vlan_del, 1335 }; 1336 1337 static const struct of_device_id mt7530_of_match[] = { 1338 { .compatible = "mediatek,mt7621", .data = (void *)ID_MT7621, }, 1339 { .compatible = "mediatek,mt7530", .data = (void *)ID_MT7530, }, 1340 { /* sentinel */ }, 1341 }; 1342 MODULE_DEVICE_TABLE(of, mt7530_of_match); 1343 1344 static int 1345 mt7530_probe(struct mdio_device *mdiodev) 1346 { 1347 struct mt7530_priv *priv; 1348 struct device_node *dn; 1349 1350 dn = mdiodev->dev.of_node; 1351 1352 priv = devm_kzalloc(&mdiodev->dev, sizeof(*priv), GFP_KERNEL); 1353 if (!priv) 1354 return -ENOMEM; 1355 1356 priv->ds = dsa_switch_alloc(&mdiodev->dev, DSA_MAX_PORTS); 1357 if (!priv->ds) 1358 return -ENOMEM; 1359 1360 /* Use medatek,mcm property to distinguish hardware type that would 1361 * casues a little bit differences on power-on sequence. 1362 */ 1363 priv->mcm = of_property_read_bool(dn, "mediatek,mcm"); 1364 if (priv->mcm) { 1365 dev_info(&mdiodev->dev, "MT7530 adapts as multi-chip module\n"); 1366 1367 priv->rstc = devm_reset_control_get(&mdiodev->dev, "mcm"); 1368 if (IS_ERR(priv->rstc)) { 1369 dev_err(&mdiodev->dev, "Couldn't get our reset line\n"); 1370 return PTR_ERR(priv->rstc); 1371 } 1372 } 1373 1374 /* Get the hardware identifier from the devicetree node. 1375 * We will need it for some of the clock and regulator setup. 1376 */ 1377 priv->id = (unsigned int)(unsigned long) 1378 of_device_get_match_data(&mdiodev->dev); 1379 1380 if (priv->id == ID_MT7530) { 1381 priv->core_pwr = devm_regulator_get(&mdiodev->dev, "core"); 1382 if (IS_ERR(priv->core_pwr)) 1383 return PTR_ERR(priv->core_pwr); 1384 1385 priv->io_pwr = devm_regulator_get(&mdiodev->dev, "io"); 1386 if (IS_ERR(priv->io_pwr)) 1387 return PTR_ERR(priv->io_pwr); 1388 } 1389 1390 /* Not MCM that indicates switch works as the remote standalone 1391 * integrated circuit so the GPIO pin would be used to complete 1392 * the reset, otherwise memory-mapped register accessing used 1393 * through syscon provides in the case of MCM. 1394 */ 1395 if (!priv->mcm) { 1396 priv->reset = devm_gpiod_get_optional(&mdiodev->dev, "reset", 1397 GPIOD_OUT_LOW); 1398 if (IS_ERR(priv->reset)) { 1399 dev_err(&mdiodev->dev, "Couldn't get our reset line\n"); 1400 return PTR_ERR(priv->reset); 1401 } 1402 } 1403 1404 priv->bus = mdiodev->bus; 1405 priv->dev = &mdiodev->dev; 1406 priv->ds->priv = priv; 1407 priv->ds->ops = &mt7530_switch_ops; 1408 mutex_init(&priv->reg_mutex); 1409 dev_set_drvdata(&mdiodev->dev, priv); 1410 1411 return dsa_register_switch(priv->ds); 1412 } 1413 1414 static void 1415 mt7530_remove(struct mdio_device *mdiodev) 1416 { 1417 struct mt7530_priv *priv = dev_get_drvdata(&mdiodev->dev); 1418 int ret = 0; 1419 1420 ret = regulator_disable(priv->core_pwr); 1421 if (ret < 0) 1422 dev_err(priv->dev, 1423 "Failed to disable core power: %d\n", ret); 1424 1425 ret = regulator_disable(priv->io_pwr); 1426 if (ret < 0) 1427 dev_err(priv->dev, "Failed to disable io pwr: %d\n", 1428 ret); 1429 1430 dsa_unregister_switch(priv->ds); 1431 mutex_destroy(&priv->reg_mutex); 1432 } 1433 1434 static struct mdio_driver mt7530_mdio_driver = { 1435 .probe = mt7530_probe, 1436 .remove = mt7530_remove, 1437 .mdiodrv.driver = { 1438 .name = "mt7530", 1439 .of_match_table = mt7530_of_match, 1440 }, 1441 }; 1442 1443 mdio_module_driver(mt7530_mdio_driver); 1444 1445 MODULE_AUTHOR("Sean Wang <sean.wang@mediatek.com>"); 1446 MODULE_DESCRIPTION("Driver for Mediatek MT7530 Switch"); 1447 MODULE_LICENSE("GPL"); 1448