1 // SPDX-License-Identifier: GPL-2.0-only 2 /* 3 * Mediatek MT7530 DSA Switch driver 4 * Copyright (C) 2017 Sean Wang <sean.wang@mediatek.com> 5 */ 6 #include <linux/etherdevice.h> 7 #include <linux/if_bridge.h> 8 #include <linux/iopoll.h> 9 #include <linux/mdio.h> 10 #include <linux/mfd/syscon.h> 11 #include <linux/module.h> 12 #include <linux/netdevice.h> 13 #include <linux/of_irq.h> 14 #include <linux/of_mdio.h> 15 #include <linux/of_net.h> 16 #include <linux/of_platform.h> 17 #include <linux/phylink.h> 18 #include <linux/regmap.h> 19 #include <linux/regulator/consumer.h> 20 #include <linux/reset.h> 21 #include <linux/gpio/consumer.h> 22 #include <linux/gpio/driver.h> 23 #include <net/dsa.h> 24 25 #include "mt7530.h" 26 27 /* String, offset, and register size in bytes if different from 4 bytes */ 28 static const struct mt7530_mib_desc mt7530_mib[] = { 29 MIB_DESC(1, 0x00, "TxDrop"), 30 MIB_DESC(1, 0x04, "TxCrcErr"), 31 MIB_DESC(1, 0x08, "TxUnicast"), 32 MIB_DESC(1, 0x0c, "TxMulticast"), 33 MIB_DESC(1, 0x10, "TxBroadcast"), 34 MIB_DESC(1, 0x14, "TxCollision"), 35 MIB_DESC(1, 0x18, "TxSingleCollision"), 36 MIB_DESC(1, 0x1c, "TxMultipleCollision"), 37 MIB_DESC(1, 0x20, "TxDeferred"), 38 MIB_DESC(1, 0x24, "TxLateCollision"), 39 MIB_DESC(1, 0x28, "TxExcessiveCollistion"), 40 MIB_DESC(1, 0x2c, "TxPause"), 41 MIB_DESC(1, 0x30, "TxPktSz64"), 42 MIB_DESC(1, 0x34, "TxPktSz65To127"), 43 MIB_DESC(1, 0x38, "TxPktSz128To255"), 44 MIB_DESC(1, 0x3c, "TxPktSz256To511"), 45 MIB_DESC(1, 0x40, "TxPktSz512To1023"), 46 MIB_DESC(1, 0x44, "Tx1024ToMax"), 47 MIB_DESC(2, 0x48, "TxBytes"), 48 MIB_DESC(1, 0x60, "RxDrop"), 49 MIB_DESC(1, 0x64, "RxFiltering"), 50 MIB_DESC(1, 0x68, "RxUnicast"), 51 MIB_DESC(1, 0x6c, "RxMulticast"), 52 MIB_DESC(1, 0x70, "RxBroadcast"), 53 MIB_DESC(1, 0x74, "RxAlignErr"), 54 MIB_DESC(1, 0x78, "RxCrcErr"), 55 MIB_DESC(1, 0x7c, "RxUnderSizeErr"), 56 MIB_DESC(1, 0x80, "RxFragErr"), 57 MIB_DESC(1, 0x84, "RxOverSzErr"), 58 MIB_DESC(1, 0x88, "RxJabberErr"), 59 MIB_DESC(1, 0x8c, "RxPause"), 60 MIB_DESC(1, 0x90, "RxPktSz64"), 61 MIB_DESC(1, 0x94, "RxPktSz65To127"), 62 MIB_DESC(1, 0x98, "RxPktSz128To255"), 63 MIB_DESC(1, 0x9c, "RxPktSz256To511"), 64 MIB_DESC(1, 0xa0, "RxPktSz512To1023"), 65 MIB_DESC(1, 0xa4, "RxPktSz1024ToMax"), 66 MIB_DESC(2, 0xa8, "RxBytes"), 67 MIB_DESC(1, 0xb0, "RxCtrlDrop"), 68 MIB_DESC(1, 0xb4, "RxIngressDrop"), 69 MIB_DESC(1, 0xb8, "RxArlDrop"), 70 }; 71 72 /* Since phy_device has not yet been created and 73 * phy_{read,write}_mmd_indirect is not available, we provide our own 74 * core_{read,write}_mmd_indirect with core_{clear,write,set} wrappers 75 * to complete this function. 76 */ 77 static int 78 core_read_mmd_indirect(struct mt7530_priv *priv, int prtad, int devad) 79 { 80 struct mii_bus *bus = priv->bus; 81 int value, ret; 82 83 /* Write the desired MMD Devad */ 84 ret = bus->write(bus, 0, MII_MMD_CTRL, devad); 85 if (ret < 0) 86 goto err; 87 88 /* Write the desired MMD register address */ 89 ret = bus->write(bus, 0, MII_MMD_DATA, prtad); 90 if (ret < 0) 91 goto err; 92 93 /* Select the Function : DATA with no post increment */ 94 ret = bus->write(bus, 0, MII_MMD_CTRL, (devad | MII_MMD_CTRL_NOINCR)); 95 if (ret < 0) 96 goto err; 97 98 /* Read the content of the MMD's selected register */ 99 value = bus->read(bus, 0, MII_MMD_DATA); 100 101 return value; 102 err: 103 dev_err(&bus->dev, "failed to read mmd register\n"); 104 105 return ret; 106 } 107 108 static int 109 core_write_mmd_indirect(struct mt7530_priv *priv, int prtad, 110 int devad, u32 data) 111 { 112 struct mii_bus *bus = priv->bus; 113 int ret; 114 115 /* Write the desired MMD Devad */ 116 ret = bus->write(bus, 0, MII_MMD_CTRL, devad); 117 if (ret < 0) 118 goto err; 119 120 /* Write the desired MMD register address */ 121 ret = bus->write(bus, 0, MII_MMD_DATA, prtad); 122 if (ret < 0) 123 goto err; 124 125 /* Select the Function : DATA with no post increment */ 126 ret = bus->write(bus, 0, MII_MMD_CTRL, (devad | MII_MMD_CTRL_NOINCR)); 127 if (ret < 0) 128 goto err; 129 130 /* Write the data into MMD's selected register */ 131 ret = bus->write(bus, 0, MII_MMD_DATA, data); 132 err: 133 if (ret < 0) 134 dev_err(&bus->dev, 135 "failed to write mmd register\n"); 136 return ret; 137 } 138 139 static void 140 core_write(struct mt7530_priv *priv, u32 reg, u32 val) 141 { 142 struct mii_bus *bus = priv->bus; 143 144 mutex_lock_nested(&bus->mdio_lock, MDIO_MUTEX_NESTED); 145 146 core_write_mmd_indirect(priv, reg, MDIO_MMD_VEND2, val); 147 148 mutex_unlock(&bus->mdio_lock); 149 } 150 151 static void 152 core_rmw(struct mt7530_priv *priv, u32 reg, u32 mask, u32 set) 153 { 154 struct mii_bus *bus = priv->bus; 155 u32 val; 156 157 mutex_lock_nested(&bus->mdio_lock, MDIO_MUTEX_NESTED); 158 159 val = core_read_mmd_indirect(priv, reg, MDIO_MMD_VEND2); 160 val &= ~mask; 161 val |= set; 162 core_write_mmd_indirect(priv, reg, MDIO_MMD_VEND2, val); 163 164 mutex_unlock(&bus->mdio_lock); 165 } 166 167 static void 168 core_set(struct mt7530_priv *priv, u32 reg, u32 val) 169 { 170 core_rmw(priv, reg, 0, val); 171 } 172 173 static void 174 core_clear(struct mt7530_priv *priv, u32 reg, u32 val) 175 { 176 core_rmw(priv, reg, val, 0); 177 } 178 179 static int 180 mt7530_mii_write(struct mt7530_priv *priv, u32 reg, u32 val) 181 { 182 struct mii_bus *bus = priv->bus; 183 u16 page, r, lo, hi; 184 int ret; 185 186 page = (reg >> 6) & 0x3ff; 187 r = (reg >> 2) & 0xf; 188 lo = val & 0xffff; 189 hi = val >> 16; 190 191 /* MT7530 uses 31 as the pseudo port */ 192 ret = bus->write(bus, 0x1f, 0x1f, page); 193 if (ret < 0) 194 goto err; 195 196 ret = bus->write(bus, 0x1f, r, lo); 197 if (ret < 0) 198 goto err; 199 200 ret = bus->write(bus, 0x1f, 0x10, hi); 201 err: 202 if (ret < 0) 203 dev_err(&bus->dev, 204 "failed to write mt7530 register\n"); 205 return ret; 206 } 207 208 static u32 209 mt7530_mii_read(struct mt7530_priv *priv, u32 reg) 210 { 211 struct mii_bus *bus = priv->bus; 212 u16 page, r, lo, hi; 213 int ret; 214 215 page = (reg >> 6) & 0x3ff; 216 r = (reg >> 2) & 0xf; 217 218 /* MT7530 uses 31 as the pseudo port */ 219 ret = bus->write(bus, 0x1f, 0x1f, page); 220 if (ret < 0) { 221 dev_err(&bus->dev, 222 "failed to read mt7530 register\n"); 223 return ret; 224 } 225 226 lo = bus->read(bus, 0x1f, r); 227 hi = bus->read(bus, 0x1f, 0x10); 228 229 return (hi << 16) | (lo & 0xffff); 230 } 231 232 static void 233 mt7530_write(struct mt7530_priv *priv, u32 reg, u32 val) 234 { 235 struct mii_bus *bus = priv->bus; 236 237 mutex_lock_nested(&bus->mdio_lock, MDIO_MUTEX_NESTED); 238 239 mt7530_mii_write(priv, reg, val); 240 241 mutex_unlock(&bus->mdio_lock); 242 } 243 244 static u32 245 _mt7530_unlocked_read(struct mt7530_dummy_poll *p) 246 { 247 return mt7530_mii_read(p->priv, p->reg); 248 } 249 250 static u32 251 _mt7530_read(struct mt7530_dummy_poll *p) 252 { 253 struct mii_bus *bus = p->priv->bus; 254 u32 val; 255 256 mutex_lock_nested(&bus->mdio_lock, MDIO_MUTEX_NESTED); 257 258 val = mt7530_mii_read(p->priv, p->reg); 259 260 mutex_unlock(&bus->mdio_lock); 261 262 return val; 263 } 264 265 static u32 266 mt7530_read(struct mt7530_priv *priv, u32 reg) 267 { 268 struct mt7530_dummy_poll p; 269 270 INIT_MT7530_DUMMY_POLL(&p, priv, reg); 271 return _mt7530_read(&p); 272 } 273 274 static void 275 mt7530_rmw(struct mt7530_priv *priv, u32 reg, 276 u32 mask, u32 set) 277 { 278 struct mii_bus *bus = priv->bus; 279 u32 val; 280 281 mutex_lock_nested(&bus->mdio_lock, MDIO_MUTEX_NESTED); 282 283 val = mt7530_mii_read(priv, reg); 284 val &= ~mask; 285 val |= set; 286 mt7530_mii_write(priv, reg, val); 287 288 mutex_unlock(&bus->mdio_lock); 289 } 290 291 static void 292 mt7530_set(struct mt7530_priv *priv, u32 reg, u32 val) 293 { 294 mt7530_rmw(priv, reg, 0, val); 295 } 296 297 static void 298 mt7530_clear(struct mt7530_priv *priv, u32 reg, u32 val) 299 { 300 mt7530_rmw(priv, reg, val, 0); 301 } 302 303 static int 304 mt7530_fdb_cmd(struct mt7530_priv *priv, enum mt7530_fdb_cmd cmd, u32 *rsp) 305 { 306 u32 val; 307 int ret; 308 struct mt7530_dummy_poll p; 309 310 /* Set the command operating upon the MAC address entries */ 311 val = ATC_BUSY | ATC_MAT(0) | cmd; 312 mt7530_write(priv, MT7530_ATC, val); 313 314 INIT_MT7530_DUMMY_POLL(&p, priv, MT7530_ATC); 315 ret = readx_poll_timeout(_mt7530_read, &p, val, 316 !(val & ATC_BUSY), 20, 20000); 317 if (ret < 0) { 318 dev_err(priv->dev, "reset timeout\n"); 319 return ret; 320 } 321 322 /* Additional sanity for read command if the specified 323 * entry is invalid 324 */ 325 val = mt7530_read(priv, MT7530_ATC); 326 if ((cmd == MT7530_FDB_READ) && (val & ATC_INVALID)) 327 return -EINVAL; 328 329 if (rsp) 330 *rsp = val; 331 332 return 0; 333 } 334 335 static void 336 mt7530_fdb_read(struct mt7530_priv *priv, struct mt7530_fdb *fdb) 337 { 338 u32 reg[3]; 339 int i; 340 341 /* Read from ARL table into an array */ 342 for (i = 0; i < 3; i++) { 343 reg[i] = mt7530_read(priv, MT7530_TSRA1 + (i * 4)); 344 345 dev_dbg(priv->dev, "%s(%d) reg[%d]=0x%x\n", 346 __func__, __LINE__, i, reg[i]); 347 } 348 349 fdb->vid = (reg[1] >> CVID) & CVID_MASK; 350 fdb->aging = (reg[2] >> AGE_TIMER) & AGE_TIMER_MASK; 351 fdb->port_mask = (reg[2] >> PORT_MAP) & PORT_MAP_MASK; 352 fdb->mac[0] = (reg[0] >> MAC_BYTE_0) & MAC_BYTE_MASK; 353 fdb->mac[1] = (reg[0] >> MAC_BYTE_1) & MAC_BYTE_MASK; 354 fdb->mac[2] = (reg[0] >> MAC_BYTE_2) & MAC_BYTE_MASK; 355 fdb->mac[3] = (reg[0] >> MAC_BYTE_3) & MAC_BYTE_MASK; 356 fdb->mac[4] = (reg[1] >> MAC_BYTE_4) & MAC_BYTE_MASK; 357 fdb->mac[5] = (reg[1] >> MAC_BYTE_5) & MAC_BYTE_MASK; 358 fdb->noarp = ((reg[2] >> ENT_STATUS) & ENT_STATUS_MASK) == STATIC_ENT; 359 } 360 361 static void 362 mt7530_fdb_write(struct mt7530_priv *priv, u16 vid, 363 u8 port_mask, const u8 *mac, 364 u8 aging, u8 type) 365 { 366 u32 reg[3] = { 0 }; 367 int i; 368 369 reg[1] |= vid & CVID_MASK; 370 reg[1] |= ATA2_IVL; 371 reg[1] |= ATA2_FID(FID_BRIDGED); 372 reg[2] |= (aging & AGE_TIMER_MASK) << AGE_TIMER; 373 reg[2] |= (port_mask & PORT_MAP_MASK) << PORT_MAP; 374 /* STATIC_ENT indicate that entry is static wouldn't 375 * be aged out and STATIC_EMP specified as erasing an 376 * entry 377 */ 378 reg[2] |= (type & ENT_STATUS_MASK) << ENT_STATUS; 379 reg[1] |= mac[5] << MAC_BYTE_5; 380 reg[1] |= mac[4] << MAC_BYTE_4; 381 reg[0] |= mac[3] << MAC_BYTE_3; 382 reg[0] |= mac[2] << MAC_BYTE_2; 383 reg[0] |= mac[1] << MAC_BYTE_1; 384 reg[0] |= mac[0] << MAC_BYTE_0; 385 386 /* Write array into the ARL table */ 387 for (i = 0; i < 3; i++) 388 mt7530_write(priv, MT7530_ATA1 + (i * 4), reg[i]); 389 } 390 391 /* Setup TX circuit including relevant PAD and driving */ 392 static int 393 mt7530_pad_clk_setup(struct dsa_switch *ds, phy_interface_t interface) 394 { 395 struct mt7530_priv *priv = ds->priv; 396 u32 ncpo1, ssc_delta, trgint, i, xtal; 397 398 xtal = mt7530_read(priv, MT7530_MHWTRAP) & HWTRAP_XTAL_MASK; 399 400 if (xtal == HWTRAP_XTAL_20MHZ) { 401 dev_err(priv->dev, 402 "%s: MT7530 with a 20MHz XTAL is not supported!\n", 403 __func__); 404 return -EINVAL; 405 } 406 407 switch (interface) { 408 case PHY_INTERFACE_MODE_RGMII: 409 trgint = 0; 410 /* PLL frequency: 125MHz */ 411 ncpo1 = 0x0c80; 412 break; 413 case PHY_INTERFACE_MODE_TRGMII: 414 trgint = 1; 415 if (priv->id == ID_MT7621) { 416 /* PLL frequency: 150MHz: 1.2GBit */ 417 if (xtal == HWTRAP_XTAL_40MHZ) 418 ncpo1 = 0x0780; 419 if (xtal == HWTRAP_XTAL_25MHZ) 420 ncpo1 = 0x0a00; 421 } else { /* PLL frequency: 250MHz: 2.0Gbit */ 422 if (xtal == HWTRAP_XTAL_40MHZ) 423 ncpo1 = 0x0c80; 424 if (xtal == HWTRAP_XTAL_25MHZ) 425 ncpo1 = 0x1400; 426 } 427 break; 428 default: 429 dev_err(priv->dev, "xMII interface %d not supported\n", 430 interface); 431 return -EINVAL; 432 } 433 434 if (xtal == HWTRAP_XTAL_25MHZ) 435 ssc_delta = 0x57; 436 else 437 ssc_delta = 0x87; 438 439 mt7530_rmw(priv, MT7530_P6ECR, P6_INTF_MODE_MASK, 440 P6_INTF_MODE(trgint)); 441 442 /* Lower Tx Driving for TRGMII path */ 443 for (i = 0 ; i < NUM_TRGMII_CTRL ; i++) 444 mt7530_write(priv, MT7530_TRGMII_TD_ODT(i), 445 TD_DM_DRVP(8) | TD_DM_DRVN(8)); 446 447 /* Disable MT7530 core and TRGMII Tx clocks */ 448 core_clear(priv, CORE_TRGMII_GSW_CLK_CG, 449 REG_GSWCK_EN | REG_TRGMIICK_EN); 450 451 /* Setup core clock for MT7530 */ 452 /* Disable PLL */ 453 core_write(priv, CORE_GSWPLL_GRP1, 0); 454 455 /* Set core clock into 500Mhz */ 456 core_write(priv, CORE_GSWPLL_GRP2, 457 RG_GSWPLL_POSDIV_500M(1) | 458 RG_GSWPLL_FBKDIV_500M(25)); 459 460 /* Enable PLL */ 461 core_write(priv, CORE_GSWPLL_GRP1, 462 RG_GSWPLL_EN_PRE | 463 RG_GSWPLL_POSDIV_200M(2) | 464 RG_GSWPLL_FBKDIV_200M(32)); 465 466 /* Setup the MT7530 TRGMII Tx Clock */ 467 core_write(priv, CORE_PLL_GROUP5, RG_LCDDS_PCW_NCPO1(ncpo1)); 468 core_write(priv, CORE_PLL_GROUP6, RG_LCDDS_PCW_NCPO0(0)); 469 core_write(priv, CORE_PLL_GROUP10, RG_LCDDS_SSC_DELTA(ssc_delta)); 470 core_write(priv, CORE_PLL_GROUP11, RG_LCDDS_SSC_DELTA1(ssc_delta)); 471 core_write(priv, CORE_PLL_GROUP4, 472 RG_SYSPLL_DDSFBK_EN | RG_SYSPLL_BIAS_EN | 473 RG_SYSPLL_BIAS_LPF_EN); 474 core_write(priv, CORE_PLL_GROUP2, 475 RG_SYSPLL_EN_NORMAL | RG_SYSPLL_VODEN | 476 RG_SYSPLL_POSDIV(1)); 477 core_write(priv, CORE_PLL_GROUP7, 478 RG_LCDDS_PCW_NCPO_CHG | RG_LCCDS_C(3) | 479 RG_LCDDS_PWDB | RG_LCDDS_ISO_EN); 480 481 /* Enable MT7530 core and TRGMII Tx clocks */ 482 core_set(priv, CORE_TRGMII_GSW_CLK_CG, 483 REG_GSWCK_EN | REG_TRGMIICK_EN); 484 485 if (!trgint) 486 for (i = 0 ; i < NUM_TRGMII_CTRL; i++) 487 mt7530_rmw(priv, MT7530_TRGMII_RD(i), 488 RD_TAP_MASK, RD_TAP(16)); 489 return 0; 490 } 491 492 static bool mt7531_dual_sgmii_supported(struct mt7530_priv *priv) 493 { 494 u32 val; 495 496 val = mt7530_read(priv, MT7531_TOP_SIG_SR); 497 498 return (val & PAD_DUAL_SGMII_EN) != 0; 499 } 500 501 static int 502 mt7531_pad_setup(struct dsa_switch *ds, phy_interface_t interface) 503 { 504 struct mt7530_priv *priv = ds->priv; 505 u32 top_sig; 506 u32 hwstrap; 507 u32 xtal; 508 u32 val; 509 510 if (mt7531_dual_sgmii_supported(priv)) 511 return 0; 512 513 val = mt7530_read(priv, MT7531_CREV); 514 top_sig = mt7530_read(priv, MT7531_TOP_SIG_SR); 515 hwstrap = mt7530_read(priv, MT7531_HWTRAP); 516 if ((val & CHIP_REV_M) > 0) 517 xtal = (top_sig & PAD_MCM_SMI_EN) ? HWTRAP_XTAL_FSEL_40MHZ : 518 HWTRAP_XTAL_FSEL_25MHZ; 519 else 520 xtal = hwstrap & HWTRAP_XTAL_FSEL_MASK; 521 522 /* Step 1 : Disable MT7531 COREPLL */ 523 val = mt7530_read(priv, MT7531_PLLGP_EN); 524 val &= ~EN_COREPLL; 525 mt7530_write(priv, MT7531_PLLGP_EN, val); 526 527 /* Step 2: switch to XTAL output */ 528 val = mt7530_read(priv, MT7531_PLLGP_EN); 529 val |= SW_CLKSW; 530 mt7530_write(priv, MT7531_PLLGP_EN, val); 531 532 val = mt7530_read(priv, MT7531_PLLGP_CR0); 533 val &= ~RG_COREPLL_EN; 534 mt7530_write(priv, MT7531_PLLGP_CR0, val); 535 536 /* Step 3: disable PLLGP and enable program PLLGP */ 537 val = mt7530_read(priv, MT7531_PLLGP_EN); 538 val |= SW_PLLGP; 539 mt7530_write(priv, MT7531_PLLGP_EN, val); 540 541 /* Step 4: program COREPLL output frequency to 500MHz */ 542 val = mt7530_read(priv, MT7531_PLLGP_CR0); 543 val &= ~RG_COREPLL_POSDIV_M; 544 val |= 2 << RG_COREPLL_POSDIV_S; 545 mt7530_write(priv, MT7531_PLLGP_CR0, val); 546 usleep_range(25, 35); 547 548 switch (xtal) { 549 case HWTRAP_XTAL_FSEL_25MHZ: 550 val = mt7530_read(priv, MT7531_PLLGP_CR0); 551 val &= ~RG_COREPLL_SDM_PCW_M; 552 val |= 0x140000 << RG_COREPLL_SDM_PCW_S; 553 mt7530_write(priv, MT7531_PLLGP_CR0, val); 554 break; 555 case HWTRAP_XTAL_FSEL_40MHZ: 556 val = mt7530_read(priv, MT7531_PLLGP_CR0); 557 val &= ~RG_COREPLL_SDM_PCW_M; 558 val |= 0x190000 << RG_COREPLL_SDM_PCW_S; 559 mt7530_write(priv, MT7531_PLLGP_CR0, val); 560 break; 561 } 562 563 /* Set feedback divide ratio update signal to high */ 564 val = mt7530_read(priv, MT7531_PLLGP_CR0); 565 val |= RG_COREPLL_SDM_PCW_CHG; 566 mt7530_write(priv, MT7531_PLLGP_CR0, val); 567 /* Wait for at least 16 XTAL clocks */ 568 usleep_range(10, 20); 569 570 /* Step 5: set feedback divide ratio update signal to low */ 571 val = mt7530_read(priv, MT7531_PLLGP_CR0); 572 val &= ~RG_COREPLL_SDM_PCW_CHG; 573 mt7530_write(priv, MT7531_PLLGP_CR0, val); 574 575 /* Enable 325M clock for SGMII */ 576 mt7530_write(priv, MT7531_ANA_PLLGP_CR5, 0xad0000); 577 578 /* Enable 250SSC clock for RGMII */ 579 mt7530_write(priv, MT7531_ANA_PLLGP_CR2, 0x4f40000); 580 581 /* Step 6: Enable MT7531 PLL */ 582 val = mt7530_read(priv, MT7531_PLLGP_CR0); 583 val |= RG_COREPLL_EN; 584 mt7530_write(priv, MT7531_PLLGP_CR0, val); 585 586 val = mt7530_read(priv, MT7531_PLLGP_EN); 587 val |= EN_COREPLL; 588 mt7530_write(priv, MT7531_PLLGP_EN, val); 589 usleep_range(25, 35); 590 591 return 0; 592 } 593 594 static void 595 mt7530_mib_reset(struct dsa_switch *ds) 596 { 597 struct mt7530_priv *priv = ds->priv; 598 599 mt7530_write(priv, MT7530_MIB_CCR, CCR_MIB_FLUSH); 600 mt7530_write(priv, MT7530_MIB_CCR, CCR_MIB_ACTIVATE); 601 } 602 603 static int mt7530_phy_read(struct mt7530_priv *priv, int port, int regnum) 604 { 605 return mdiobus_read_nested(priv->bus, port, regnum); 606 } 607 608 static int mt7530_phy_write(struct mt7530_priv *priv, int port, int regnum, 609 u16 val) 610 { 611 return mdiobus_write_nested(priv->bus, port, regnum, val); 612 } 613 614 static int 615 mt7531_ind_c45_phy_read(struct mt7530_priv *priv, int port, int devad, 616 int regnum) 617 { 618 struct mii_bus *bus = priv->bus; 619 struct mt7530_dummy_poll p; 620 u32 reg, val; 621 int ret; 622 623 INIT_MT7530_DUMMY_POLL(&p, priv, MT7531_PHY_IAC); 624 625 mutex_lock_nested(&bus->mdio_lock, MDIO_MUTEX_NESTED); 626 627 ret = readx_poll_timeout(_mt7530_unlocked_read, &p, val, 628 !(val & MT7531_PHY_ACS_ST), 20, 100000); 629 if (ret < 0) { 630 dev_err(priv->dev, "poll timeout\n"); 631 goto out; 632 } 633 634 reg = MT7531_MDIO_CL45_ADDR | MT7531_MDIO_PHY_ADDR(port) | 635 MT7531_MDIO_DEV_ADDR(devad) | regnum; 636 mt7530_mii_write(priv, MT7531_PHY_IAC, reg | MT7531_PHY_ACS_ST); 637 638 ret = readx_poll_timeout(_mt7530_unlocked_read, &p, val, 639 !(val & MT7531_PHY_ACS_ST), 20, 100000); 640 if (ret < 0) { 641 dev_err(priv->dev, "poll timeout\n"); 642 goto out; 643 } 644 645 reg = MT7531_MDIO_CL45_READ | MT7531_MDIO_PHY_ADDR(port) | 646 MT7531_MDIO_DEV_ADDR(devad); 647 mt7530_mii_write(priv, MT7531_PHY_IAC, reg | MT7531_PHY_ACS_ST); 648 649 ret = readx_poll_timeout(_mt7530_unlocked_read, &p, val, 650 !(val & MT7531_PHY_ACS_ST), 20, 100000); 651 if (ret < 0) { 652 dev_err(priv->dev, "poll timeout\n"); 653 goto out; 654 } 655 656 ret = val & MT7531_MDIO_RW_DATA_MASK; 657 out: 658 mutex_unlock(&bus->mdio_lock); 659 660 return ret; 661 } 662 663 static int 664 mt7531_ind_c45_phy_write(struct mt7530_priv *priv, int port, int devad, 665 int regnum, u32 data) 666 { 667 struct mii_bus *bus = priv->bus; 668 struct mt7530_dummy_poll p; 669 u32 val, reg; 670 int ret; 671 672 INIT_MT7530_DUMMY_POLL(&p, priv, MT7531_PHY_IAC); 673 674 mutex_lock_nested(&bus->mdio_lock, MDIO_MUTEX_NESTED); 675 676 ret = readx_poll_timeout(_mt7530_unlocked_read, &p, val, 677 !(val & MT7531_PHY_ACS_ST), 20, 100000); 678 if (ret < 0) { 679 dev_err(priv->dev, "poll timeout\n"); 680 goto out; 681 } 682 683 reg = MT7531_MDIO_CL45_ADDR | MT7531_MDIO_PHY_ADDR(port) | 684 MT7531_MDIO_DEV_ADDR(devad) | regnum; 685 mt7530_mii_write(priv, MT7531_PHY_IAC, reg | MT7531_PHY_ACS_ST); 686 687 ret = readx_poll_timeout(_mt7530_unlocked_read, &p, val, 688 !(val & MT7531_PHY_ACS_ST), 20, 100000); 689 if (ret < 0) { 690 dev_err(priv->dev, "poll timeout\n"); 691 goto out; 692 } 693 694 reg = MT7531_MDIO_CL45_WRITE | MT7531_MDIO_PHY_ADDR(port) | 695 MT7531_MDIO_DEV_ADDR(devad) | data; 696 mt7530_mii_write(priv, MT7531_PHY_IAC, reg | MT7531_PHY_ACS_ST); 697 698 ret = readx_poll_timeout(_mt7530_unlocked_read, &p, val, 699 !(val & MT7531_PHY_ACS_ST), 20, 100000); 700 if (ret < 0) { 701 dev_err(priv->dev, "poll timeout\n"); 702 goto out; 703 } 704 705 out: 706 mutex_unlock(&bus->mdio_lock); 707 708 return ret; 709 } 710 711 static int 712 mt7531_ind_c22_phy_read(struct mt7530_priv *priv, int port, int regnum) 713 { 714 struct mii_bus *bus = priv->bus; 715 struct mt7530_dummy_poll p; 716 int ret; 717 u32 val; 718 719 INIT_MT7530_DUMMY_POLL(&p, priv, MT7531_PHY_IAC); 720 721 mutex_lock_nested(&bus->mdio_lock, MDIO_MUTEX_NESTED); 722 723 ret = readx_poll_timeout(_mt7530_unlocked_read, &p, val, 724 !(val & MT7531_PHY_ACS_ST), 20, 100000); 725 if (ret < 0) { 726 dev_err(priv->dev, "poll timeout\n"); 727 goto out; 728 } 729 730 val = MT7531_MDIO_CL22_READ | MT7531_MDIO_PHY_ADDR(port) | 731 MT7531_MDIO_REG_ADDR(regnum); 732 733 mt7530_mii_write(priv, MT7531_PHY_IAC, val | MT7531_PHY_ACS_ST); 734 735 ret = readx_poll_timeout(_mt7530_unlocked_read, &p, val, 736 !(val & MT7531_PHY_ACS_ST), 20, 100000); 737 if (ret < 0) { 738 dev_err(priv->dev, "poll timeout\n"); 739 goto out; 740 } 741 742 ret = val & MT7531_MDIO_RW_DATA_MASK; 743 out: 744 mutex_unlock(&bus->mdio_lock); 745 746 return ret; 747 } 748 749 static int 750 mt7531_ind_c22_phy_write(struct mt7530_priv *priv, int port, int regnum, 751 u16 data) 752 { 753 struct mii_bus *bus = priv->bus; 754 struct mt7530_dummy_poll p; 755 int ret; 756 u32 reg; 757 758 INIT_MT7530_DUMMY_POLL(&p, priv, MT7531_PHY_IAC); 759 760 mutex_lock_nested(&bus->mdio_lock, MDIO_MUTEX_NESTED); 761 762 ret = readx_poll_timeout(_mt7530_unlocked_read, &p, reg, 763 !(reg & MT7531_PHY_ACS_ST), 20, 100000); 764 if (ret < 0) { 765 dev_err(priv->dev, "poll timeout\n"); 766 goto out; 767 } 768 769 reg = MT7531_MDIO_CL22_WRITE | MT7531_MDIO_PHY_ADDR(port) | 770 MT7531_MDIO_REG_ADDR(regnum) | data; 771 772 mt7530_mii_write(priv, MT7531_PHY_IAC, reg | MT7531_PHY_ACS_ST); 773 774 ret = readx_poll_timeout(_mt7530_unlocked_read, &p, reg, 775 !(reg & MT7531_PHY_ACS_ST), 20, 100000); 776 if (ret < 0) { 777 dev_err(priv->dev, "poll timeout\n"); 778 goto out; 779 } 780 781 out: 782 mutex_unlock(&bus->mdio_lock); 783 784 return ret; 785 } 786 787 static int 788 mt7531_ind_phy_read(struct mt7530_priv *priv, int port, int regnum) 789 { 790 int devad; 791 int ret; 792 793 if (regnum & MII_ADDR_C45) { 794 devad = (regnum >> MII_DEVADDR_C45_SHIFT) & 0x1f; 795 ret = mt7531_ind_c45_phy_read(priv, port, devad, 796 regnum & MII_REGADDR_C45_MASK); 797 } else { 798 ret = mt7531_ind_c22_phy_read(priv, port, regnum); 799 } 800 801 return ret; 802 } 803 804 static int 805 mt7531_ind_phy_write(struct mt7530_priv *priv, int port, int regnum, 806 u16 data) 807 { 808 int devad; 809 int ret; 810 811 if (regnum & MII_ADDR_C45) { 812 devad = (regnum >> MII_DEVADDR_C45_SHIFT) & 0x1f; 813 ret = mt7531_ind_c45_phy_write(priv, port, devad, 814 regnum & MII_REGADDR_C45_MASK, 815 data); 816 } else { 817 ret = mt7531_ind_c22_phy_write(priv, port, regnum, data); 818 } 819 820 return ret; 821 } 822 823 static int 824 mt753x_phy_read(struct mii_bus *bus, int port, int regnum) 825 { 826 struct mt7530_priv *priv = bus->priv; 827 828 return priv->info->phy_read(priv, port, regnum); 829 } 830 831 static int 832 mt753x_phy_write(struct mii_bus *bus, int port, int regnum, u16 val) 833 { 834 struct mt7530_priv *priv = bus->priv; 835 836 return priv->info->phy_write(priv, port, regnum, val); 837 } 838 839 static void 840 mt7530_get_strings(struct dsa_switch *ds, int port, u32 stringset, 841 uint8_t *data) 842 { 843 int i; 844 845 if (stringset != ETH_SS_STATS) 846 return; 847 848 for (i = 0; i < ARRAY_SIZE(mt7530_mib); i++) 849 strncpy(data + i * ETH_GSTRING_LEN, mt7530_mib[i].name, 850 ETH_GSTRING_LEN); 851 } 852 853 static void 854 mt7530_get_ethtool_stats(struct dsa_switch *ds, int port, 855 uint64_t *data) 856 { 857 struct mt7530_priv *priv = ds->priv; 858 const struct mt7530_mib_desc *mib; 859 u32 reg, i; 860 u64 hi; 861 862 for (i = 0; i < ARRAY_SIZE(mt7530_mib); i++) { 863 mib = &mt7530_mib[i]; 864 reg = MT7530_PORT_MIB_COUNTER(port) + mib->offset; 865 866 data[i] = mt7530_read(priv, reg); 867 if (mib->size == 2) { 868 hi = mt7530_read(priv, reg + 4); 869 data[i] |= hi << 32; 870 } 871 } 872 } 873 874 static int 875 mt7530_get_sset_count(struct dsa_switch *ds, int port, int sset) 876 { 877 if (sset != ETH_SS_STATS) 878 return 0; 879 880 return ARRAY_SIZE(mt7530_mib); 881 } 882 883 static int 884 mt7530_set_ageing_time(struct dsa_switch *ds, unsigned int msecs) 885 { 886 struct mt7530_priv *priv = ds->priv; 887 unsigned int secs = msecs / 1000; 888 unsigned int tmp_age_count; 889 unsigned int error = -1; 890 unsigned int age_count; 891 unsigned int age_unit; 892 893 /* Applied timer is (AGE_CNT + 1) * (AGE_UNIT + 1) seconds */ 894 if (secs < 1 || secs > (AGE_CNT_MAX + 1) * (AGE_UNIT_MAX + 1)) 895 return -ERANGE; 896 897 /* iterate through all possible age_count to find the closest pair */ 898 for (tmp_age_count = 0; tmp_age_count <= AGE_CNT_MAX; ++tmp_age_count) { 899 unsigned int tmp_age_unit = secs / (tmp_age_count + 1) - 1; 900 901 if (tmp_age_unit <= AGE_UNIT_MAX) { 902 unsigned int tmp_error = secs - 903 (tmp_age_count + 1) * (tmp_age_unit + 1); 904 905 /* found a closer pair */ 906 if (error > tmp_error) { 907 error = tmp_error; 908 age_count = tmp_age_count; 909 age_unit = tmp_age_unit; 910 } 911 912 /* found the exact match, so break the loop */ 913 if (!error) 914 break; 915 } 916 } 917 918 mt7530_write(priv, MT7530_AAC, AGE_CNT(age_count) | AGE_UNIT(age_unit)); 919 920 return 0; 921 } 922 923 static void mt7530_setup_port5(struct dsa_switch *ds, phy_interface_t interface) 924 { 925 struct mt7530_priv *priv = ds->priv; 926 u8 tx_delay = 0; 927 int val; 928 929 mutex_lock(&priv->reg_mutex); 930 931 val = mt7530_read(priv, MT7530_MHWTRAP); 932 933 val |= MHWTRAP_MANUAL | MHWTRAP_P5_MAC_SEL | MHWTRAP_P5_DIS; 934 val &= ~MHWTRAP_P5_RGMII_MODE & ~MHWTRAP_PHY0_SEL; 935 936 switch (priv->p5_intf_sel) { 937 case P5_INTF_SEL_PHY_P0: 938 /* MT7530_P5_MODE_GPHY_P0: 2nd GMAC -> P5 -> P0 */ 939 val |= MHWTRAP_PHY0_SEL; 940 fallthrough; 941 case P5_INTF_SEL_PHY_P4: 942 /* MT7530_P5_MODE_GPHY_P4: 2nd GMAC -> P5 -> P4 */ 943 val &= ~MHWTRAP_P5_MAC_SEL & ~MHWTRAP_P5_DIS; 944 945 /* Setup the MAC by default for the cpu port */ 946 mt7530_write(priv, MT7530_PMCR_P(5), 0x56300); 947 break; 948 case P5_INTF_SEL_GMAC5: 949 /* MT7530_P5_MODE_GMAC: P5 -> External phy or 2nd GMAC */ 950 val &= ~MHWTRAP_P5_DIS; 951 break; 952 case P5_DISABLED: 953 interface = PHY_INTERFACE_MODE_NA; 954 break; 955 default: 956 dev_err(ds->dev, "Unsupported p5_intf_sel %d\n", 957 priv->p5_intf_sel); 958 goto unlock_exit; 959 } 960 961 /* Setup RGMII settings */ 962 if (phy_interface_mode_is_rgmii(interface)) { 963 val |= MHWTRAP_P5_RGMII_MODE; 964 965 /* P5 RGMII RX Clock Control: delay setting for 1000M */ 966 mt7530_write(priv, MT7530_P5RGMIIRXCR, CSR_RGMII_EDGE_ALIGN); 967 968 /* Don't set delay in DSA mode */ 969 if (!dsa_is_dsa_port(priv->ds, 5) && 970 (interface == PHY_INTERFACE_MODE_RGMII_TXID || 971 interface == PHY_INTERFACE_MODE_RGMII_ID)) 972 tx_delay = 4; /* n * 0.5 ns */ 973 974 /* P5 RGMII TX Clock Control: delay x */ 975 mt7530_write(priv, MT7530_P5RGMIITXCR, 976 CSR_RGMII_TXC_CFG(0x10 + tx_delay)); 977 978 /* reduce P5 RGMII Tx driving, 8mA */ 979 mt7530_write(priv, MT7530_IO_DRV_CR, 980 P5_IO_CLK_DRV(1) | P5_IO_DATA_DRV(1)); 981 } 982 983 mt7530_write(priv, MT7530_MHWTRAP, val); 984 985 dev_dbg(ds->dev, "Setup P5, HWTRAP=0x%x, intf_sel=%s, phy-mode=%s\n", 986 val, p5_intf_modes(priv->p5_intf_sel), phy_modes(interface)); 987 988 priv->p5_interface = interface; 989 990 unlock_exit: 991 mutex_unlock(&priv->reg_mutex); 992 } 993 994 static int 995 mt753x_cpu_port_enable(struct dsa_switch *ds, int port) 996 { 997 struct mt7530_priv *priv = ds->priv; 998 int ret; 999 1000 /* Setup max capability of CPU port at first */ 1001 if (priv->info->cpu_port_config) { 1002 ret = priv->info->cpu_port_config(ds, port); 1003 if (ret) 1004 return ret; 1005 } 1006 1007 /* Enable Mediatek header mode on the cpu port */ 1008 mt7530_write(priv, MT7530_PVC_P(port), 1009 PORT_SPEC_TAG); 1010 1011 /* Disable flooding by default */ 1012 mt7530_rmw(priv, MT7530_MFC, BC_FFP_MASK | UNM_FFP_MASK | UNU_FFP_MASK, 1013 BC_FFP(BIT(port)) | UNM_FFP(BIT(port)) | UNU_FFP(BIT(port))); 1014 1015 /* Set CPU port number */ 1016 if (priv->id == ID_MT7621) 1017 mt7530_rmw(priv, MT7530_MFC, CPU_MASK, CPU_EN | CPU_PORT(port)); 1018 1019 /* CPU port gets connected to all user ports of 1020 * the switch. 1021 */ 1022 mt7530_write(priv, MT7530_PCR_P(port), 1023 PCR_MATRIX(dsa_user_ports(priv->ds))); 1024 1025 /* Set to fallback mode for independent VLAN learning */ 1026 mt7530_rmw(priv, MT7530_PCR_P(port), PCR_PORT_VLAN_MASK, 1027 MT7530_PORT_FALLBACK_MODE); 1028 1029 return 0; 1030 } 1031 1032 static int 1033 mt7530_port_enable(struct dsa_switch *ds, int port, 1034 struct phy_device *phy) 1035 { 1036 struct mt7530_priv *priv = ds->priv; 1037 1038 mutex_lock(&priv->reg_mutex); 1039 1040 /* Allow the user port gets connected to the cpu port and also 1041 * restore the port matrix if the port is the member of a certain 1042 * bridge. 1043 */ 1044 priv->ports[port].pm |= PCR_MATRIX(BIT(MT7530_CPU_PORT)); 1045 priv->ports[port].enable = true; 1046 mt7530_rmw(priv, MT7530_PCR_P(port), PCR_MATRIX_MASK, 1047 priv->ports[port].pm); 1048 mt7530_clear(priv, MT7530_PMCR_P(port), PMCR_LINK_SETTINGS_MASK); 1049 1050 mutex_unlock(&priv->reg_mutex); 1051 1052 return 0; 1053 } 1054 1055 static void 1056 mt7530_port_disable(struct dsa_switch *ds, int port) 1057 { 1058 struct mt7530_priv *priv = ds->priv; 1059 1060 mutex_lock(&priv->reg_mutex); 1061 1062 /* Clear up all port matrix which could be restored in the next 1063 * enablement for the port. 1064 */ 1065 priv->ports[port].enable = false; 1066 mt7530_rmw(priv, MT7530_PCR_P(port), PCR_MATRIX_MASK, 1067 PCR_MATRIX_CLR); 1068 mt7530_clear(priv, MT7530_PMCR_P(port), PMCR_LINK_SETTINGS_MASK); 1069 1070 mutex_unlock(&priv->reg_mutex); 1071 } 1072 1073 static int 1074 mt7530_port_change_mtu(struct dsa_switch *ds, int port, int new_mtu) 1075 { 1076 struct mt7530_priv *priv = ds->priv; 1077 struct mii_bus *bus = priv->bus; 1078 int length; 1079 u32 val; 1080 1081 /* When a new MTU is set, DSA always set the CPU port's MTU to the 1082 * largest MTU of the slave ports. Because the switch only has a global 1083 * RX length register, only allowing CPU port here is enough. 1084 */ 1085 if (!dsa_is_cpu_port(ds, port)) 1086 return 0; 1087 1088 mutex_lock_nested(&bus->mdio_lock, MDIO_MUTEX_NESTED); 1089 1090 val = mt7530_mii_read(priv, MT7530_GMACCR); 1091 val &= ~MAX_RX_PKT_LEN_MASK; 1092 1093 /* RX length also includes Ethernet header, MTK tag, and FCS length */ 1094 length = new_mtu + ETH_HLEN + MTK_HDR_LEN + ETH_FCS_LEN; 1095 if (length <= 1522) { 1096 val |= MAX_RX_PKT_LEN_1522; 1097 } else if (length <= 1536) { 1098 val |= MAX_RX_PKT_LEN_1536; 1099 } else if (length <= 1552) { 1100 val |= MAX_RX_PKT_LEN_1552; 1101 } else { 1102 val &= ~MAX_RX_JUMBO_MASK; 1103 val |= MAX_RX_JUMBO(DIV_ROUND_UP(length, 1024)); 1104 val |= MAX_RX_PKT_LEN_JUMBO; 1105 } 1106 1107 mt7530_mii_write(priv, MT7530_GMACCR, val); 1108 1109 mutex_unlock(&bus->mdio_lock); 1110 1111 return 0; 1112 } 1113 1114 static int 1115 mt7530_port_max_mtu(struct dsa_switch *ds, int port) 1116 { 1117 return MT7530_MAX_MTU; 1118 } 1119 1120 static void 1121 mt7530_stp_state_set(struct dsa_switch *ds, int port, u8 state) 1122 { 1123 struct mt7530_priv *priv = ds->priv; 1124 u32 stp_state; 1125 1126 switch (state) { 1127 case BR_STATE_DISABLED: 1128 stp_state = MT7530_STP_DISABLED; 1129 break; 1130 case BR_STATE_BLOCKING: 1131 stp_state = MT7530_STP_BLOCKING; 1132 break; 1133 case BR_STATE_LISTENING: 1134 stp_state = MT7530_STP_LISTENING; 1135 break; 1136 case BR_STATE_LEARNING: 1137 stp_state = MT7530_STP_LEARNING; 1138 break; 1139 case BR_STATE_FORWARDING: 1140 default: 1141 stp_state = MT7530_STP_FORWARDING; 1142 break; 1143 } 1144 1145 mt7530_rmw(priv, MT7530_SSP_P(port), FID_PST_MASK(FID_BRIDGED), 1146 FID_PST(FID_BRIDGED, stp_state)); 1147 } 1148 1149 static int 1150 mt7530_port_pre_bridge_flags(struct dsa_switch *ds, int port, 1151 struct switchdev_brport_flags flags, 1152 struct netlink_ext_ack *extack) 1153 { 1154 if (flags.mask & ~(BR_LEARNING | BR_FLOOD | BR_MCAST_FLOOD | 1155 BR_BCAST_FLOOD)) 1156 return -EINVAL; 1157 1158 return 0; 1159 } 1160 1161 static int 1162 mt7530_port_bridge_flags(struct dsa_switch *ds, int port, 1163 struct switchdev_brport_flags flags, 1164 struct netlink_ext_ack *extack) 1165 { 1166 struct mt7530_priv *priv = ds->priv; 1167 1168 if (flags.mask & BR_LEARNING) 1169 mt7530_rmw(priv, MT7530_PSC_P(port), SA_DIS, 1170 flags.val & BR_LEARNING ? 0 : SA_DIS); 1171 1172 if (flags.mask & BR_FLOOD) 1173 mt7530_rmw(priv, MT7530_MFC, UNU_FFP(BIT(port)), 1174 flags.val & BR_FLOOD ? UNU_FFP(BIT(port)) : 0); 1175 1176 if (flags.mask & BR_MCAST_FLOOD) 1177 mt7530_rmw(priv, MT7530_MFC, UNM_FFP(BIT(port)), 1178 flags.val & BR_MCAST_FLOOD ? UNM_FFP(BIT(port)) : 0); 1179 1180 if (flags.mask & BR_BCAST_FLOOD) 1181 mt7530_rmw(priv, MT7530_MFC, BC_FFP(BIT(port)), 1182 flags.val & BR_BCAST_FLOOD ? BC_FFP(BIT(port)) : 0); 1183 1184 return 0; 1185 } 1186 1187 static int 1188 mt7530_port_bridge_join(struct dsa_switch *ds, int port, 1189 struct dsa_bridge bridge, bool *tx_fwd_offload) 1190 { 1191 struct dsa_port *dp = dsa_to_port(ds, port), *other_dp; 1192 u32 port_bitmap = BIT(MT7530_CPU_PORT); 1193 struct mt7530_priv *priv = ds->priv; 1194 1195 mutex_lock(&priv->reg_mutex); 1196 1197 dsa_switch_for_each_user_port(other_dp, ds) { 1198 int other_port = other_dp->index; 1199 1200 if (dp == other_dp) 1201 continue; 1202 1203 /* Add this port to the port matrix of the other ports in the 1204 * same bridge. If the port is disabled, port matrix is kept 1205 * and not being setup until the port becomes enabled. 1206 */ 1207 if (!dsa_port_offloads_bridge(other_dp, &bridge)) 1208 continue; 1209 1210 if (priv->ports[other_port].enable) 1211 mt7530_set(priv, MT7530_PCR_P(other_port), 1212 PCR_MATRIX(BIT(port))); 1213 priv->ports[other_port].pm |= PCR_MATRIX(BIT(port)); 1214 1215 port_bitmap |= BIT(other_port); 1216 } 1217 1218 /* Add the all other ports to this port matrix. */ 1219 if (priv->ports[port].enable) 1220 mt7530_rmw(priv, MT7530_PCR_P(port), 1221 PCR_MATRIX_MASK, PCR_MATRIX(port_bitmap)); 1222 priv->ports[port].pm |= PCR_MATRIX(port_bitmap); 1223 1224 /* Set to fallback mode for independent VLAN learning */ 1225 mt7530_rmw(priv, MT7530_PCR_P(port), PCR_PORT_VLAN_MASK, 1226 MT7530_PORT_FALLBACK_MODE); 1227 1228 mutex_unlock(&priv->reg_mutex); 1229 1230 return 0; 1231 } 1232 1233 static void 1234 mt7530_port_set_vlan_unaware(struct dsa_switch *ds, int port) 1235 { 1236 struct mt7530_priv *priv = ds->priv; 1237 bool all_user_ports_removed = true; 1238 int i; 1239 1240 /* This is called after .port_bridge_leave when leaving a VLAN-aware 1241 * bridge. Don't set standalone ports to fallback mode. 1242 */ 1243 if (dsa_port_bridge_dev_get(dsa_to_port(ds, port))) 1244 mt7530_rmw(priv, MT7530_PCR_P(port), PCR_PORT_VLAN_MASK, 1245 MT7530_PORT_FALLBACK_MODE); 1246 1247 mt7530_rmw(priv, MT7530_PVC_P(port), 1248 VLAN_ATTR_MASK | PVC_EG_TAG_MASK | ACC_FRM_MASK, 1249 VLAN_ATTR(MT7530_VLAN_TRANSPARENT) | 1250 PVC_EG_TAG(MT7530_VLAN_EG_CONSISTENT) | 1251 MT7530_VLAN_ACC_ALL); 1252 1253 /* Set PVID to 0 */ 1254 mt7530_rmw(priv, MT7530_PPBV1_P(port), G0_PORT_VID_MASK, 1255 G0_PORT_VID_DEF); 1256 1257 for (i = 0; i < MT7530_NUM_PORTS; i++) { 1258 if (dsa_is_user_port(ds, i) && 1259 dsa_port_is_vlan_filtering(dsa_to_port(ds, i))) { 1260 all_user_ports_removed = false; 1261 break; 1262 } 1263 } 1264 1265 /* CPU port also does the same thing until all user ports belonging to 1266 * the CPU port get out of VLAN filtering mode. 1267 */ 1268 if (all_user_ports_removed) { 1269 mt7530_write(priv, MT7530_PCR_P(MT7530_CPU_PORT), 1270 PCR_MATRIX(dsa_user_ports(priv->ds))); 1271 mt7530_write(priv, MT7530_PVC_P(MT7530_CPU_PORT), PORT_SPEC_TAG 1272 | PVC_EG_TAG(MT7530_VLAN_EG_CONSISTENT)); 1273 } 1274 } 1275 1276 static void 1277 mt7530_port_set_vlan_aware(struct dsa_switch *ds, int port) 1278 { 1279 struct mt7530_priv *priv = ds->priv; 1280 1281 /* Trapped into security mode allows packet forwarding through VLAN 1282 * table lookup. 1283 */ 1284 if (dsa_is_user_port(ds, port)) { 1285 mt7530_rmw(priv, MT7530_PCR_P(port), PCR_PORT_VLAN_MASK, 1286 MT7530_PORT_SECURITY_MODE); 1287 mt7530_rmw(priv, MT7530_PPBV1_P(port), G0_PORT_VID_MASK, 1288 G0_PORT_VID(priv->ports[port].pvid)); 1289 1290 /* Only accept tagged frames if PVID is not set */ 1291 if (!priv->ports[port].pvid) 1292 mt7530_rmw(priv, MT7530_PVC_P(port), ACC_FRM_MASK, 1293 MT7530_VLAN_ACC_TAGGED); 1294 } 1295 1296 /* Set the port as a user port which is to be able to recognize VID 1297 * from incoming packets before fetching entry within the VLAN table. 1298 */ 1299 mt7530_rmw(priv, MT7530_PVC_P(port), VLAN_ATTR_MASK | PVC_EG_TAG_MASK, 1300 VLAN_ATTR(MT7530_VLAN_USER) | 1301 PVC_EG_TAG(MT7530_VLAN_EG_DISABLED)); 1302 } 1303 1304 static void 1305 mt7530_port_bridge_leave(struct dsa_switch *ds, int port, 1306 struct dsa_bridge bridge) 1307 { 1308 struct dsa_port *dp = dsa_to_port(ds, port), *other_dp; 1309 struct mt7530_priv *priv = ds->priv; 1310 1311 mutex_lock(&priv->reg_mutex); 1312 1313 dsa_switch_for_each_user_port(other_dp, ds) { 1314 int other_port = other_dp->index; 1315 1316 if (dp == other_dp) 1317 continue; 1318 1319 /* Remove this port from the port matrix of the other ports 1320 * in the same bridge. If the port is disabled, port matrix 1321 * is kept and not being setup until the port becomes enabled. 1322 */ 1323 if (!dsa_port_offloads_bridge(other_dp, &bridge)) 1324 continue; 1325 1326 if (priv->ports[other_port].enable) 1327 mt7530_clear(priv, MT7530_PCR_P(other_port), 1328 PCR_MATRIX(BIT(port))); 1329 priv->ports[other_port].pm &= ~PCR_MATRIX(BIT(port)); 1330 } 1331 1332 /* Set the cpu port to be the only one in the port matrix of 1333 * this port. 1334 */ 1335 if (priv->ports[port].enable) 1336 mt7530_rmw(priv, MT7530_PCR_P(port), PCR_MATRIX_MASK, 1337 PCR_MATRIX(BIT(MT7530_CPU_PORT))); 1338 priv->ports[port].pm = PCR_MATRIX(BIT(MT7530_CPU_PORT)); 1339 1340 /* When a port is removed from the bridge, the port would be set up 1341 * back to the default as is at initial boot which is a VLAN-unaware 1342 * port. 1343 */ 1344 mt7530_rmw(priv, MT7530_PCR_P(port), PCR_PORT_VLAN_MASK, 1345 MT7530_PORT_MATRIX_MODE); 1346 1347 mutex_unlock(&priv->reg_mutex); 1348 } 1349 1350 static int 1351 mt7530_port_fdb_add(struct dsa_switch *ds, int port, 1352 const unsigned char *addr, u16 vid) 1353 { 1354 struct mt7530_priv *priv = ds->priv; 1355 int ret; 1356 u8 port_mask = BIT(port); 1357 1358 mutex_lock(&priv->reg_mutex); 1359 mt7530_fdb_write(priv, vid, port_mask, addr, -1, STATIC_ENT); 1360 ret = mt7530_fdb_cmd(priv, MT7530_FDB_WRITE, NULL); 1361 mutex_unlock(&priv->reg_mutex); 1362 1363 return ret; 1364 } 1365 1366 static int 1367 mt7530_port_fdb_del(struct dsa_switch *ds, int port, 1368 const unsigned char *addr, u16 vid) 1369 { 1370 struct mt7530_priv *priv = ds->priv; 1371 int ret; 1372 u8 port_mask = BIT(port); 1373 1374 mutex_lock(&priv->reg_mutex); 1375 mt7530_fdb_write(priv, vid, port_mask, addr, -1, STATIC_EMP); 1376 ret = mt7530_fdb_cmd(priv, MT7530_FDB_WRITE, NULL); 1377 mutex_unlock(&priv->reg_mutex); 1378 1379 return ret; 1380 } 1381 1382 static int 1383 mt7530_port_fdb_dump(struct dsa_switch *ds, int port, 1384 dsa_fdb_dump_cb_t *cb, void *data) 1385 { 1386 struct mt7530_priv *priv = ds->priv; 1387 struct mt7530_fdb _fdb = { 0 }; 1388 int cnt = MT7530_NUM_FDB_RECORDS; 1389 int ret = 0; 1390 u32 rsp = 0; 1391 1392 mutex_lock(&priv->reg_mutex); 1393 1394 ret = mt7530_fdb_cmd(priv, MT7530_FDB_START, &rsp); 1395 if (ret < 0) 1396 goto err; 1397 1398 do { 1399 if (rsp & ATC_SRCH_HIT) { 1400 mt7530_fdb_read(priv, &_fdb); 1401 if (_fdb.port_mask & BIT(port)) { 1402 ret = cb(_fdb.mac, _fdb.vid, _fdb.noarp, 1403 data); 1404 if (ret < 0) 1405 break; 1406 } 1407 } 1408 } while (--cnt && 1409 !(rsp & ATC_SRCH_END) && 1410 !mt7530_fdb_cmd(priv, MT7530_FDB_NEXT, &rsp)); 1411 err: 1412 mutex_unlock(&priv->reg_mutex); 1413 1414 return 0; 1415 } 1416 1417 static int 1418 mt7530_port_mdb_add(struct dsa_switch *ds, int port, 1419 const struct switchdev_obj_port_mdb *mdb) 1420 { 1421 struct mt7530_priv *priv = ds->priv; 1422 const u8 *addr = mdb->addr; 1423 u16 vid = mdb->vid; 1424 u8 port_mask = 0; 1425 int ret; 1426 1427 mutex_lock(&priv->reg_mutex); 1428 1429 mt7530_fdb_write(priv, vid, 0, addr, 0, STATIC_EMP); 1430 if (!mt7530_fdb_cmd(priv, MT7530_FDB_READ, NULL)) 1431 port_mask = (mt7530_read(priv, MT7530_ATRD) >> PORT_MAP) 1432 & PORT_MAP_MASK; 1433 1434 port_mask |= BIT(port); 1435 mt7530_fdb_write(priv, vid, port_mask, addr, -1, STATIC_ENT); 1436 ret = mt7530_fdb_cmd(priv, MT7530_FDB_WRITE, NULL); 1437 1438 mutex_unlock(&priv->reg_mutex); 1439 1440 return ret; 1441 } 1442 1443 static int 1444 mt7530_port_mdb_del(struct dsa_switch *ds, int port, 1445 const struct switchdev_obj_port_mdb *mdb) 1446 { 1447 struct mt7530_priv *priv = ds->priv; 1448 const u8 *addr = mdb->addr; 1449 u16 vid = mdb->vid; 1450 u8 port_mask = 0; 1451 int ret; 1452 1453 mutex_lock(&priv->reg_mutex); 1454 1455 mt7530_fdb_write(priv, vid, 0, addr, 0, STATIC_EMP); 1456 if (!mt7530_fdb_cmd(priv, MT7530_FDB_READ, NULL)) 1457 port_mask = (mt7530_read(priv, MT7530_ATRD) >> PORT_MAP) 1458 & PORT_MAP_MASK; 1459 1460 port_mask &= ~BIT(port); 1461 mt7530_fdb_write(priv, vid, port_mask, addr, -1, 1462 port_mask ? STATIC_ENT : STATIC_EMP); 1463 ret = mt7530_fdb_cmd(priv, MT7530_FDB_WRITE, NULL); 1464 1465 mutex_unlock(&priv->reg_mutex); 1466 1467 return ret; 1468 } 1469 1470 static int 1471 mt7530_vlan_cmd(struct mt7530_priv *priv, enum mt7530_vlan_cmd cmd, u16 vid) 1472 { 1473 struct mt7530_dummy_poll p; 1474 u32 val; 1475 int ret; 1476 1477 val = VTCR_BUSY | VTCR_FUNC(cmd) | vid; 1478 mt7530_write(priv, MT7530_VTCR, val); 1479 1480 INIT_MT7530_DUMMY_POLL(&p, priv, MT7530_VTCR); 1481 ret = readx_poll_timeout(_mt7530_read, &p, val, 1482 !(val & VTCR_BUSY), 20, 20000); 1483 if (ret < 0) { 1484 dev_err(priv->dev, "poll timeout\n"); 1485 return ret; 1486 } 1487 1488 val = mt7530_read(priv, MT7530_VTCR); 1489 if (val & VTCR_INVALID) { 1490 dev_err(priv->dev, "read VTCR invalid\n"); 1491 return -EINVAL; 1492 } 1493 1494 return 0; 1495 } 1496 1497 static int 1498 mt7530_port_vlan_filtering(struct dsa_switch *ds, int port, bool vlan_filtering, 1499 struct netlink_ext_ack *extack) 1500 { 1501 if (vlan_filtering) { 1502 /* The port is being kept as VLAN-unaware port when bridge is 1503 * set up with vlan_filtering not being set, Otherwise, the 1504 * port and the corresponding CPU port is required the setup 1505 * for becoming a VLAN-aware port. 1506 */ 1507 mt7530_port_set_vlan_aware(ds, port); 1508 mt7530_port_set_vlan_aware(ds, MT7530_CPU_PORT); 1509 } else { 1510 mt7530_port_set_vlan_unaware(ds, port); 1511 } 1512 1513 return 0; 1514 } 1515 1516 static void 1517 mt7530_hw_vlan_add(struct mt7530_priv *priv, 1518 struct mt7530_hw_vlan_entry *entry) 1519 { 1520 u8 new_members; 1521 u32 val; 1522 1523 new_members = entry->old_members | BIT(entry->port) | 1524 BIT(MT7530_CPU_PORT); 1525 1526 /* Validate the entry with independent learning, create egress tag per 1527 * VLAN and joining the port as one of the port members. 1528 */ 1529 val = IVL_MAC | VTAG_EN | PORT_MEM(new_members) | FID(FID_BRIDGED) | 1530 VLAN_VALID; 1531 mt7530_write(priv, MT7530_VAWD1, val); 1532 1533 /* Decide whether adding tag or not for those outgoing packets from the 1534 * port inside the VLAN. 1535 */ 1536 val = entry->untagged ? MT7530_VLAN_EGRESS_UNTAG : 1537 MT7530_VLAN_EGRESS_TAG; 1538 mt7530_rmw(priv, MT7530_VAWD2, 1539 ETAG_CTRL_P_MASK(entry->port), 1540 ETAG_CTRL_P(entry->port, val)); 1541 1542 /* CPU port is always taken as a tagged port for serving more than one 1543 * VLANs across and also being applied with egress type stack mode for 1544 * that VLAN tags would be appended after hardware special tag used as 1545 * DSA tag. 1546 */ 1547 mt7530_rmw(priv, MT7530_VAWD2, 1548 ETAG_CTRL_P_MASK(MT7530_CPU_PORT), 1549 ETAG_CTRL_P(MT7530_CPU_PORT, 1550 MT7530_VLAN_EGRESS_STACK)); 1551 } 1552 1553 static void 1554 mt7530_hw_vlan_del(struct mt7530_priv *priv, 1555 struct mt7530_hw_vlan_entry *entry) 1556 { 1557 u8 new_members; 1558 u32 val; 1559 1560 new_members = entry->old_members & ~BIT(entry->port); 1561 1562 val = mt7530_read(priv, MT7530_VAWD1); 1563 if (!(val & VLAN_VALID)) { 1564 dev_err(priv->dev, 1565 "Cannot be deleted due to invalid entry\n"); 1566 return; 1567 } 1568 1569 /* If certain member apart from CPU port is still alive in the VLAN, 1570 * the entry would be kept valid. Otherwise, the entry is got to be 1571 * disabled. 1572 */ 1573 if (new_members && new_members != BIT(MT7530_CPU_PORT)) { 1574 val = IVL_MAC | VTAG_EN | PORT_MEM(new_members) | 1575 VLAN_VALID; 1576 mt7530_write(priv, MT7530_VAWD1, val); 1577 } else { 1578 mt7530_write(priv, MT7530_VAWD1, 0); 1579 mt7530_write(priv, MT7530_VAWD2, 0); 1580 } 1581 } 1582 1583 static void 1584 mt7530_hw_vlan_update(struct mt7530_priv *priv, u16 vid, 1585 struct mt7530_hw_vlan_entry *entry, 1586 mt7530_vlan_op vlan_op) 1587 { 1588 u32 val; 1589 1590 /* Fetch entry */ 1591 mt7530_vlan_cmd(priv, MT7530_VTCR_RD_VID, vid); 1592 1593 val = mt7530_read(priv, MT7530_VAWD1); 1594 1595 entry->old_members = (val >> PORT_MEM_SHFT) & PORT_MEM_MASK; 1596 1597 /* Manipulate entry */ 1598 vlan_op(priv, entry); 1599 1600 /* Flush result to hardware */ 1601 mt7530_vlan_cmd(priv, MT7530_VTCR_WR_VID, vid); 1602 } 1603 1604 static int 1605 mt7530_setup_vlan0(struct mt7530_priv *priv) 1606 { 1607 u32 val; 1608 1609 /* Validate the entry with independent learning, keep the original 1610 * ingress tag attribute. 1611 */ 1612 val = IVL_MAC | EG_CON | PORT_MEM(MT7530_ALL_MEMBERS) | FID(FID_BRIDGED) | 1613 VLAN_VALID; 1614 mt7530_write(priv, MT7530_VAWD1, val); 1615 1616 return mt7530_vlan_cmd(priv, MT7530_VTCR_WR_VID, 0); 1617 } 1618 1619 static int 1620 mt7530_port_vlan_add(struct dsa_switch *ds, int port, 1621 const struct switchdev_obj_port_vlan *vlan, 1622 struct netlink_ext_ack *extack) 1623 { 1624 bool untagged = vlan->flags & BRIDGE_VLAN_INFO_UNTAGGED; 1625 bool pvid = vlan->flags & BRIDGE_VLAN_INFO_PVID; 1626 struct mt7530_hw_vlan_entry new_entry; 1627 struct mt7530_priv *priv = ds->priv; 1628 1629 mutex_lock(&priv->reg_mutex); 1630 1631 mt7530_hw_vlan_entry_init(&new_entry, port, untagged); 1632 mt7530_hw_vlan_update(priv, vlan->vid, &new_entry, mt7530_hw_vlan_add); 1633 1634 if (pvid) { 1635 priv->ports[port].pvid = vlan->vid; 1636 1637 /* Accept all frames if PVID is set */ 1638 mt7530_rmw(priv, MT7530_PVC_P(port), ACC_FRM_MASK, 1639 MT7530_VLAN_ACC_ALL); 1640 1641 /* Only configure PVID if VLAN filtering is enabled */ 1642 if (dsa_port_is_vlan_filtering(dsa_to_port(ds, port))) 1643 mt7530_rmw(priv, MT7530_PPBV1_P(port), 1644 G0_PORT_VID_MASK, 1645 G0_PORT_VID(vlan->vid)); 1646 } else if (vlan->vid && priv->ports[port].pvid == vlan->vid) { 1647 /* This VLAN is overwritten without PVID, so unset it */ 1648 priv->ports[port].pvid = G0_PORT_VID_DEF; 1649 1650 /* Only accept tagged frames if the port is VLAN-aware */ 1651 if (dsa_port_is_vlan_filtering(dsa_to_port(ds, port))) 1652 mt7530_rmw(priv, MT7530_PVC_P(port), ACC_FRM_MASK, 1653 MT7530_VLAN_ACC_TAGGED); 1654 1655 mt7530_rmw(priv, MT7530_PPBV1_P(port), G0_PORT_VID_MASK, 1656 G0_PORT_VID_DEF); 1657 } 1658 1659 mutex_unlock(&priv->reg_mutex); 1660 1661 return 0; 1662 } 1663 1664 static int 1665 mt7530_port_vlan_del(struct dsa_switch *ds, int port, 1666 const struct switchdev_obj_port_vlan *vlan) 1667 { 1668 struct mt7530_hw_vlan_entry target_entry; 1669 struct mt7530_priv *priv = ds->priv; 1670 1671 mutex_lock(&priv->reg_mutex); 1672 1673 mt7530_hw_vlan_entry_init(&target_entry, port, 0); 1674 mt7530_hw_vlan_update(priv, vlan->vid, &target_entry, 1675 mt7530_hw_vlan_del); 1676 1677 /* PVID is being restored to the default whenever the PVID port 1678 * is being removed from the VLAN. 1679 */ 1680 if (priv->ports[port].pvid == vlan->vid) { 1681 priv->ports[port].pvid = G0_PORT_VID_DEF; 1682 1683 /* Only accept tagged frames if the port is VLAN-aware */ 1684 if (dsa_port_is_vlan_filtering(dsa_to_port(ds, port))) 1685 mt7530_rmw(priv, MT7530_PVC_P(port), ACC_FRM_MASK, 1686 MT7530_VLAN_ACC_TAGGED); 1687 1688 mt7530_rmw(priv, MT7530_PPBV1_P(port), G0_PORT_VID_MASK, 1689 G0_PORT_VID_DEF); 1690 } 1691 1692 1693 mutex_unlock(&priv->reg_mutex); 1694 1695 return 0; 1696 } 1697 1698 static int mt753x_mirror_port_get(unsigned int id, u32 val) 1699 { 1700 return (id == ID_MT7531) ? MT7531_MIRROR_PORT_GET(val) : 1701 MIRROR_PORT(val); 1702 } 1703 1704 static int mt753x_mirror_port_set(unsigned int id, u32 val) 1705 { 1706 return (id == ID_MT7531) ? MT7531_MIRROR_PORT_SET(val) : 1707 MIRROR_PORT(val); 1708 } 1709 1710 static int mt753x_port_mirror_add(struct dsa_switch *ds, int port, 1711 struct dsa_mall_mirror_tc_entry *mirror, 1712 bool ingress) 1713 { 1714 struct mt7530_priv *priv = ds->priv; 1715 int monitor_port; 1716 u32 val; 1717 1718 /* Check for existent entry */ 1719 if ((ingress ? priv->mirror_rx : priv->mirror_tx) & BIT(port)) 1720 return -EEXIST; 1721 1722 val = mt7530_read(priv, MT753X_MIRROR_REG(priv->id)); 1723 1724 /* MT7530 only supports one monitor port */ 1725 monitor_port = mt753x_mirror_port_get(priv->id, val); 1726 if (val & MT753X_MIRROR_EN(priv->id) && 1727 monitor_port != mirror->to_local_port) 1728 return -EEXIST; 1729 1730 val |= MT753X_MIRROR_EN(priv->id); 1731 val &= ~MT753X_MIRROR_MASK(priv->id); 1732 val |= mt753x_mirror_port_set(priv->id, mirror->to_local_port); 1733 mt7530_write(priv, MT753X_MIRROR_REG(priv->id), val); 1734 1735 val = mt7530_read(priv, MT7530_PCR_P(port)); 1736 if (ingress) { 1737 val |= PORT_RX_MIR; 1738 priv->mirror_rx |= BIT(port); 1739 } else { 1740 val |= PORT_TX_MIR; 1741 priv->mirror_tx |= BIT(port); 1742 } 1743 mt7530_write(priv, MT7530_PCR_P(port), val); 1744 1745 return 0; 1746 } 1747 1748 static void mt753x_port_mirror_del(struct dsa_switch *ds, int port, 1749 struct dsa_mall_mirror_tc_entry *mirror) 1750 { 1751 struct mt7530_priv *priv = ds->priv; 1752 u32 val; 1753 1754 val = mt7530_read(priv, MT7530_PCR_P(port)); 1755 if (mirror->ingress) { 1756 val &= ~PORT_RX_MIR; 1757 priv->mirror_rx &= ~BIT(port); 1758 } else { 1759 val &= ~PORT_TX_MIR; 1760 priv->mirror_tx &= ~BIT(port); 1761 } 1762 mt7530_write(priv, MT7530_PCR_P(port), val); 1763 1764 if (!priv->mirror_rx && !priv->mirror_tx) { 1765 val = mt7530_read(priv, MT753X_MIRROR_REG(priv->id)); 1766 val &= ~MT753X_MIRROR_EN(priv->id); 1767 mt7530_write(priv, MT753X_MIRROR_REG(priv->id), val); 1768 } 1769 } 1770 1771 static enum dsa_tag_protocol 1772 mtk_get_tag_protocol(struct dsa_switch *ds, int port, 1773 enum dsa_tag_protocol mp) 1774 { 1775 return DSA_TAG_PROTO_MTK; 1776 } 1777 1778 #ifdef CONFIG_GPIOLIB 1779 static inline u32 1780 mt7530_gpio_to_bit(unsigned int offset) 1781 { 1782 /* Map GPIO offset to register bit 1783 * [ 2: 0] port 0 LED 0..2 as GPIO 0..2 1784 * [ 6: 4] port 1 LED 0..2 as GPIO 3..5 1785 * [10: 8] port 2 LED 0..2 as GPIO 6..8 1786 * [14:12] port 3 LED 0..2 as GPIO 9..11 1787 * [18:16] port 4 LED 0..2 as GPIO 12..14 1788 */ 1789 return BIT(offset + offset / 3); 1790 } 1791 1792 static int 1793 mt7530_gpio_get(struct gpio_chip *gc, unsigned int offset) 1794 { 1795 struct mt7530_priv *priv = gpiochip_get_data(gc); 1796 u32 bit = mt7530_gpio_to_bit(offset); 1797 1798 return !!(mt7530_read(priv, MT7530_LED_GPIO_DATA) & bit); 1799 } 1800 1801 static void 1802 mt7530_gpio_set(struct gpio_chip *gc, unsigned int offset, int value) 1803 { 1804 struct mt7530_priv *priv = gpiochip_get_data(gc); 1805 u32 bit = mt7530_gpio_to_bit(offset); 1806 1807 if (value) 1808 mt7530_set(priv, MT7530_LED_GPIO_DATA, bit); 1809 else 1810 mt7530_clear(priv, MT7530_LED_GPIO_DATA, bit); 1811 } 1812 1813 static int 1814 mt7530_gpio_get_direction(struct gpio_chip *gc, unsigned int offset) 1815 { 1816 struct mt7530_priv *priv = gpiochip_get_data(gc); 1817 u32 bit = mt7530_gpio_to_bit(offset); 1818 1819 return (mt7530_read(priv, MT7530_LED_GPIO_DIR) & bit) ? 1820 GPIO_LINE_DIRECTION_OUT : GPIO_LINE_DIRECTION_IN; 1821 } 1822 1823 static int 1824 mt7530_gpio_direction_input(struct gpio_chip *gc, unsigned int offset) 1825 { 1826 struct mt7530_priv *priv = gpiochip_get_data(gc); 1827 u32 bit = mt7530_gpio_to_bit(offset); 1828 1829 mt7530_clear(priv, MT7530_LED_GPIO_OE, bit); 1830 mt7530_clear(priv, MT7530_LED_GPIO_DIR, bit); 1831 1832 return 0; 1833 } 1834 1835 static int 1836 mt7530_gpio_direction_output(struct gpio_chip *gc, unsigned int offset, int value) 1837 { 1838 struct mt7530_priv *priv = gpiochip_get_data(gc); 1839 u32 bit = mt7530_gpio_to_bit(offset); 1840 1841 mt7530_set(priv, MT7530_LED_GPIO_DIR, bit); 1842 1843 if (value) 1844 mt7530_set(priv, MT7530_LED_GPIO_DATA, bit); 1845 else 1846 mt7530_clear(priv, MT7530_LED_GPIO_DATA, bit); 1847 1848 mt7530_set(priv, MT7530_LED_GPIO_OE, bit); 1849 1850 return 0; 1851 } 1852 1853 static int 1854 mt7530_setup_gpio(struct mt7530_priv *priv) 1855 { 1856 struct device *dev = priv->dev; 1857 struct gpio_chip *gc; 1858 1859 gc = devm_kzalloc(dev, sizeof(*gc), GFP_KERNEL); 1860 if (!gc) 1861 return -ENOMEM; 1862 1863 mt7530_write(priv, MT7530_LED_GPIO_OE, 0); 1864 mt7530_write(priv, MT7530_LED_GPIO_DIR, 0); 1865 mt7530_write(priv, MT7530_LED_IO_MODE, 0); 1866 1867 gc->label = "mt7530"; 1868 gc->parent = dev; 1869 gc->owner = THIS_MODULE; 1870 gc->get_direction = mt7530_gpio_get_direction; 1871 gc->direction_input = mt7530_gpio_direction_input; 1872 gc->direction_output = mt7530_gpio_direction_output; 1873 gc->get = mt7530_gpio_get; 1874 gc->set = mt7530_gpio_set; 1875 gc->base = -1; 1876 gc->ngpio = 15; 1877 gc->can_sleep = true; 1878 1879 return devm_gpiochip_add_data(dev, gc, priv); 1880 } 1881 #endif /* CONFIG_GPIOLIB */ 1882 1883 static irqreturn_t 1884 mt7530_irq_thread_fn(int irq, void *dev_id) 1885 { 1886 struct mt7530_priv *priv = dev_id; 1887 bool handled = false; 1888 u32 val; 1889 int p; 1890 1891 mutex_lock_nested(&priv->bus->mdio_lock, MDIO_MUTEX_NESTED); 1892 val = mt7530_mii_read(priv, MT7530_SYS_INT_STS); 1893 mt7530_mii_write(priv, MT7530_SYS_INT_STS, val); 1894 mutex_unlock(&priv->bus->mdio_lock); 1895 1896 for (p = 0; p < MT7530_NUM_PHYS; p++) { 1897 if (BIT(p) & val) { 1898 unsigned int irq; 1899 1900 irq = irq_find_mapping(priv->irq_domain, p); 1901 handle_nested_irq(irq); 1902 handled = true; 1903 } 1904 } 1905 1906 return IRQ_RETVAL(handled); 1907 } 1908 1909 static void 1910 mt7530_irq_mask(struct irq_data *d) 1911 { 1912 struct mt7530_priv *priv = irq_data_get_irq_chip_data(d); 1913 1914 priv->irq_enable &= ~BIT(d->hwirq); 1915 } 1916 1917 static void 1918 mt7530_irq_unmask(struct irq_data *d) 1919 { 1920 struct mt7530_priv *priv = irq_data_get_irq_chip_data(d); 1921 1922 priv->irq_enable |= BIT(d->hwirq); 1923 } 1924 1925 static void 1926 mt7530_irq_bus_lock(struct irq_data *d) 1927 { 1928 struct mt7530_priv *priv = irq_data_get_irq_chip_data(d); 1929 1930 mutex_lock_nested(&priv->bus->mdio_lock, MDIO_MUTEX_NESTED); 1931 } 1932 1933 static void 1934 mt7530_irq_bus_sync_unlock(struct irq_data *d) 1935 { 1936 struct mt7530_priv *priv = irq_data_get_irq_chip_data(d); 1937 1938 mt7530_mii_write(priv, MT7530_SYS_INT_EN, priv->irq_enable); 1939 mutex_unlock(&priv->bus->mdio_lock); 1940 } 1941 1942 static struct irq_chip mt7530_irq_chip = { 1943 .name = KBUILD_MODNAME, 1944 .irq_mask = mt7530_irq_mask, 1945 .irq_unmask = mt7530_irq_unmask, 1946 .irq_bus_lock = mt7530_irq_bus_lock, 1947 .irq_bus_sync_unlock = mt7530_irq_bus_sync_unlock, 1948 }; 1949 1950 static int 1951 mt7530_irq_map(struct irq_domain *domain, unsigned int irq, 1952 irq_hw_number_t hwirq) 1953 { 1954 irq_set_chip_data(irq, domain->host_data); 1955 irq_set_chip_and_handler(irq, &mt7530_irq_chip, handle_simple_irq); 1956 irq_set_nested_thread(irq, true); 1957 irq_set_noprobe(irq); 1958 1959 return 0; 1960 } 1961 1962 static const struct irq_domain_ops mt7530_irq_domain_ops = { 1963 .map = mt7530_irq_map, 1964 .xlate = irq_domain_xlate_onecell, 1965 }; 1966 1967 static void 1968 mt7530_setup_mdio_irq(struct mt7530_priv *priv) 1969 { 1970 struct dsa_switch *ds = priv->ds; 1971 int p; 1972 1973 for (p = 0; p < MT7530_NUM_PHYS; p++) { 1974 if (BIT(p) & ds->phys_mii_mask) { 1975 unsigned int irq; 1976 1977 irq = irq_create_mapping(priv->irq_domain, p); 1978 ds->slave_mii_bus->irq[p] = irq; 1979 } 1980 } 1981 } 1982 1983 static int 1984 mt7530_setup_irq(struct mt7530_priv *priv) 1985 { 1986 struct device *dev = priv->dev; 1987 struct device_node *np = dev->of_node; 1988 int ret; 1989 1990 if (!of_property_read_bool(np, "interrupt-controller")) { 1991 dev_info(dev, "no interrupt support\n"); 1992 return 0; 1993 } 1994 1995 priv->irq = of_irq_get(np, 0); 1996 if (priv->irq <= 0) { 1997 dev_err(dev, "failed to get parent IRQ: %d\n", priv->irq); 1998 return priv->irq ? : -EINVAL; 1999 } 2000 2001 priv->irq_domain = irq_domain_add_linear(np, MT7530_NUM_PHYS, 2002 &mt7530_irq_domain_ops, priv); 2003 if (!priv->irq_domain) { 2004 dev_err(dev, "failed to create IRQ domain\n"); 2005 return -ENOMEM; 2006 } 2007 2008 /* This register must be set for MT7530 to properly fire interrupts */ 2009 if (priv->id != ID_MT7531) 2010 mt7530_set(priv, MT7530_TOP_SIG_CTRL, TOP_SIG_CTRL_NORMAL); 2011 2012 ret = request_threaded_irq(priv->irq, NULL, mt7530_irq_thread_fn, 2013 IRQF_ONESHOT, KBUILD_MODNAME, priv); 2014 if (ret) { 2015 irq_domain_remove(priv->irq_domain); 2016 dev_err(dev, "failed to request IRQ: %d\n", ret); 2017 return ret; 2018 } 2019 2020 return 0; 2021 } 2022 2023 static void 2024 mt7530_free_mdio_irq(struct mt7530_priv *priv) 2025 { 2026 int p; 2027 2028 for (p = 0; p < MT7530_NUM_PHYS; p++) { 2029 if (BIT(p) & priv->ds->phys_mii_mask) { 2030 unsigned int irq; 2031 2032 irq = irq_find_mapping(priv->irq_domain, p); 2033 irq_dispose_mapping(irq); 2034 } 2035 } 2036 } 2037 2038 static void 2039 mt7530_free_irq_common(struct mt7530_priv *priv) 2040 { 2041 free_irq(priv->irq, priv); 2042 irq_domain_remove(priv->irq_domain); 2043 } 2044 2045 static void 2046 mt7530_free_irq(struct mt7530_priv *priv) 2047 { 2048 mt7530_free_mdio_irq(priv); 2049 mt7530_free_irq_common(priv); 2050 } 2051 2052 static int 2053 mt7530_setup_mdio(struct mt7530_priv *priv) 2054 { 2055 struct dsa_switch *ds = priv->ds; 2056 struct device *dev = priv->dev; 2057 struct mii_bus *bus; 2058 static int idx; 2059 int ret; 2060 2061 bus = devm_mdiobus_alloc(dev); 2062 if (!bus) 2063 return -ENOMEM; 2064 2065 ds->slave_mii_bus = bus; 2066 bus->priv = priv; 2067 bus->name = KBUILD_MODNAME "-mii"; 2068 snprintf(bus->id, MII_BUS_ID_SIZE, KBUILD_MODNAME "-%d", idx++); 2069 bus->read = mt753x_phy_read; 2070 bus->write = mt753x_phy_write; 2071 bus->parent = dev; 2072 bus->phy_mask = ~ds->phys_mii_mask; 2073 2074 if (priv->irq) 2075 mt7530_setup_mdio_irq(priv); 2076 2077 ret = devm_mdiobus_register(dev, bus); 2078 if (ret) { 2079 dev_err(dev, "failed to register MDIO bus: %d\n", ret); 2080 if (priv->irq) 2081 mt7530_free_mdio_irq(priv); 2082 } 2083 2084 return ret; 2085 } 2086 2087 static int 2088 mt7530_setup(struct dsa_switch *ds) 2089 { 2090 struct mt7530_priv *priv = ds->priv; 2091 struct device_node *phy_node; 2092 struct device_node *mac_np; 2093 struct mt7530_dummy_poll p; 2094 phy_interface_t interface; 2095 struct device_node *dn; 2096 u32 id, val; 2097 int ret, i; 2098 2099 /* The parent node of master netdev which holds the common system 2100 * controller also is the container for two GMACs nodes representing 2101 * as two netdev instances. 2102 */ 2103 dn = dsa_to_port(ds, MT7530_CPU_PORT)->master->dev.of_node->parent; 2104 ds->assisted_learning_on_cpu_port = true; 2105 ds->mtu_enforcement_ingress = true; 2106 2107 if (priv->id == ID_MT7530) { 2108 regulator_set_voltage(priv->core_pwr, 1000000, 1000000); 2109 ret = regulator_enable(priv->core_pwr); 2110 if (ret < 0) { 2111 dev_err(priv->dev, 2112 "Failed to enable core power: %d\n", ret); 2113 return ret; 2114 } 2115 2116 regulator_set_voltage(priv->io_pwr, 3300000, 3300000); 2117 ret = regulator_enable(priv->io_pwr); 2118 if (ret < 0) { 2119 dev_err(priv->dev, "Failed to enable io pwr: %d\n", 2120 ret); 2121 return ret; 2122 } 2123 } 2124 2125 /* Reset whole chip through gpio pin or memory-mapped registers for 2126 * different type of hardware 2127 */ 2128 if (priv->mcm) { 2129 reset_control_assert(priv->rstc); 2130 usleep_range(1000, 1100); 2131 reset_control_deassert(priv->rstc); 2132 } else { 2133 gpiod_set_value_cansleep(priv->reset, 0); 2134 usleep_range(1000, 1100); 2135 gpiod_set_value_cansleep(priv->reset, 1); 2136 } 2137 2138 /* Waiting for MT7530 got to stable */ 2139 INIT_MT7530_DUMMY_POLL(&p, priv, MT7530_HWTRAP); 2140 ret = readx_poll_timeout(_mt7530_read, &p, val, val != 0, 2141 20, 1000000); 2142 if (ret < 0) { 2143 dev_err(priv->dev, "reset timeout\n"); 2144 return ret; 2145 } 2146 2147 id = mt7530_read(priv, MT7530_CREV); 2148 id >>= CHIP_NAME_SHIFT; 2149 if (id != MT7530_ID) { 2150 dev_err(priv->dev, "chip %x can't be supported\n", id); 2151 return -ENODEV; 2152 } 2153 2154 /* Reset the switch through internal reset */ 2155 mt7530_write(priv, MT7530_SYS_CTRL, 2156 SYS_CTRL_PHY_RST | SYS_CTRL_SW_RST | 2157 SYS_CTRL_REG_RST); 2158 2159 /* Enable Port 6 only; P5 as GMAC5 which currently is not supported */ 2160 val = mt7530_read(priv, MT7530_MHWTRAP); 2161 val &= ~MHWTRAP_P6_DIS & ~MHWTRAP_PHY_ACCESS; 2162 val |= MHWTRAP_MANUAL; 2163 mt7530_write(priv, MT7530_MHWTRAP, val); 2164 2165 priv->p6_interface = PHY_INTERFACE_MODE_NA; 2166 2167 /* Enable and reset MIB counters */ 2168 mt7530_mib_reset(ds); 2169 2170 for (i = 0; i < MT7530_NUM_PORTS; i++) { 2171 /* Disable forwarding by default on all ports */ 2172 mt7530_rmw(priv, MT7530_PCR_P(i), PCR_MATRIX_MASK, 2173 PCR_MATRIX_CLR); 2174 2175 /* Disable learning by default on all ports */ 2176 mt7530_set(priv, MT7530_PSC_P(i), SA_DIS); 2177 2178 if (dsa_is_cpu_port(ds, i)) { 2179 ret = mt753x_cpu_port_enable(ds, i); 2180 if (ret) 2181 return ret; 2182 } else { 2183 mt7530_port_disable(ds, i); 2184 2185 /* Set default PVID to 0 on all user ports */ 2186 mt7530_rmw(priv, MT7530_PPBV1_P(i), G0_PORT_VID_MASK, 2187 G0_PORT_VID_DEF); 2188 } 2189 /* Enable consistent egress tag */ 2190 mt7530_rmw(priv, MT7530_PVC_P(i), PVC_EG_TAG_MASK, 2191 PVC_EG_TAG(MT7530_VLAN_EG_CONSISTENT)); 2192 } 2193 2194 /* Setup VLAN ID 0 for VLAN-unaware bridges */ 2195 ret = mt7530_setup_vlan0(priv); 2196 if (ret) 2197 return ret; 2198 2199 /* Setup port 5 */ 2200 priv->p5_intf_sel = P5_DISABLED; 2201 interface = PHY_INTERFACE_MODE_NA; 2202 2203 if (!dsa_is_unused_port(ds, 5)) { 2204 priv->p5_intf_sel = P5_INTF_SEL_GMAC5; 2205 ret = of_get_phy_mode(dsa_to_port(ds, 5)->dn, &interface); 2206 if (ret && ret != -ENODEV) 2207 return ret; 2208 } else { 2209 /* Scan the ethernet nodes. look for GMAC1, lookup used phy */ 2210 for_each_child_of_node(dn, mac_np) { 2211 if (!of_device_is_compatible(mac_np, 2212 "mediatek,eth-mac")) 2213 continue; 2214 2215 ret = of_property_read_u32(mac_np, "reg", &id); 2216 if (ret < 0 || id != 1) 2217 continue; 2218 2219 phy_node = of_parse_phandle(mac_np, "phy-handle", 0); 2220 if (!phy_node) 2221 continue; 2222 2223 if (phy_node->parent == priv->dev->of_node->parent) { 2224 ret = of_get_phy_mode(mac_np, &interface); 2225 if (ret && ret != -ENODEV) { 2226 of_node_put(mac_np); 2227 return ret; 2228 } 2229 id = of_mdio_parse_addr(ds->dev, phy_node); 2230 if (id == 0) 2231 priv->p5_intf_sel = P5_INTF_SEL_PHY_P0; 2232 if (id == 4) 2233 priv->p5_intf_sel = P5_INTF_SEL_PHY_P4; 2234 } 2235 of_node_put(mac_np); 2236 of_node_put(phy_node); 2237 break; 2238 } 2239 } 2240 2241 #ifdef CONFIG_GPIOLIB 2242 if (of_property_read_bool(priv->dev->of_node, "gpio-controller")) { 2243 ret = mt7530_setup_gpio(priv); 2244 if (ret) 2245 return ret; 2246 } 2247 #endif /* CONFIG_GPIOLIB */ 2248 2249 mt7530_setup_port5(ds, interface); 2250 2251 /* Flush the FDB table */ 2252 ret = mt7530_fdb_cmd(priv, MT7530_FDB_FLUSH, NULL); 2253 if (ret < 0) 2254 return ret; 2255 2256 return 0; 2257 } 2258 2259 static int 2260 mt7531_setup(struct dsa_switch *ds) 2261 { 2262 struct mt7530_priv *priv = ds->priv; 2263 struct mt7530_dummy_poll p; 2264 u32 val, id; 2265 int ret, i; 2266 2267 /* Reset whole chip through gpio pin or memory-mapped registers for 2268 * different type of hardware 2269 */ 2270 if (priv->mcm) { 2271 reset_control_assert(priv->rstc); 2272 usleep_range(1000, 1100); 2273 reset_control_deassert(priv->rstc); 2274 } else { 2275 gpiod_set_value_cansleep(priv->reset, 0); 2276 usleep_range(1000, 1100); 2277 gpiod_set_value_cansleep(priv->reset, 1); 2278 } 2279 2280 /* Waiting for MT7530 got to stable */ 2281 INIT_MT7530_DUMMY_POLL(&p, priv, MT7530_HWTRAP); 2282 ret = readx_poll_timeout(_mt7530_read, &p, val, val != 0, 2283 20, 1000000); 2284 if (ret < 0) { 2285 dev_err(priv->dev, "reset timeout\n"); 2286 return ret; 2287 } 2288 2289 id = mt7530_read(priv, MT7531_CREV); 2290 id >>= CHIP_NAME_SHIFT; 2291 2292 if (id != MT7531_ID) { 2293 dev_err(priv->dev, "chip %x can't be supported\n", id); 2294 return -ENODEV; 2295 } 2296 2297 /* Reset the switch through internal reset */ 2298 mt7530_write(priv, MT7530_SYS_CTRL, 2299 SYS_CTRL_PHY_RST | SYS_CTRL_SW_RST | 2300 SYS_CTRL_REG_RST); 2301 2302 if (mt7531_dual_sgmii_supported(priv)) { 2303 priv->p5_intf_sel = P5_INTF_SEL_GMAC5_SGMII; 2304 2305 /* Let ds->slave_mii_bus be able to access external phy. */ 2306 mt7530_rmw(priv, MT7531_GPIO_MODE1, MT7531_GPIO11_RG_RXD2_MASK, 2307 MT7531_EXT_P_MDC_11); 2308 mt7530_rmw(priv, MT7531_GPIO_MODE1, MT7531_GPIO12_RG_RXD3_MASK, 2309 MT7531_EXT_P_MDIO_12); 2310 } else { 2311 priv->p5_intf_sel = P5_INTF_SEL_GMAC5; 2312 } 2313 dev_dbg(ds->dev, "P5 support %s interface\n", 2314 p5_intf_modes(priv->p5_intf_sel)); 2315 2316 mt7530_rmw(priv, MT7531_GPIO_MODE0, MT7531_GPIO0_MASK, 2317 MT7531_GPIO0_INTERRUPT); 2318 2319 /* Let phylink decide the interface later. */ 2320 priv->p5_interface = PHY_INTERFACE_MODE_NA; 2321 priv->p6_interface = PHY_INTERFACE_MODE_NA; 2322 2323 /* Enable PHY core PLL, since phy_device has not yet been created 2324 * provided for phy_[read,write]_mmd_indirect is called, we provide 2325 * our own mt7531_ind_mmd_phy_[read,write] to complete this 2326 * function. 2327 */ 2328 val = mt7531_ind_c45_phy_read(priv, MT753X_CTRL_PHY_ADDR, 2329 MDIO_MMD_VEND2, CORE_PLL_GROUP4); 2330 val |= MT7531_PHY_PLL_BYPASS_MODE; 2331 val &= ~MT7531_PHY_PLL_OFF; 2332 mt7531_ind_c45_phy_write(priv, MT753X_CTRL_PHY_ADDR, MDIO_MMD_VEND2, 2333 CORE_PLL_GROUP4, val); 2334 2335 /* BPDU to CPU port */ 2336 mt7530_rmw(priv, MT7531_CFC, MT7531_CPU_PMAP_MASK, 2337 BIT(MT7530_CPU_PORT)); 2338 mt7530_rmw(priv, MT753X_BPC, MT753X_BPDU_PORT_FW_MASK, 2339 MT753X_BPDU_CPU_ONLY); 2340 2341 /* Enable and reset MIB counters */ 2342 mt7530_mib_reset(ds); 2343 2344 for (i = 0; i < MT7530_NUM_PORTS; i++) { 2345 /* Disable forwarding by default on all ports */ 2346 mt7530_rmw(priv, MT7530_PCR_P(i), PCR_MATRIX_MASK, 2347 PCR_MATRIX_CLR); 2348 2349 /* Disable learning by default on all ports */ 2350 mt7530_set(priv, MT7530_PSC_P(i), SA_DIS); 2351 2352 mt7530_set(priv, MT7531_DBG_CNT(i), MT7531_DIS_CLR); 2353 2354 if (dsa_is_cpu_port(ds, i)) { 2355 ret = mt753x_cpu_port_enable(ds, i); 2356 if (ret) 2357 return ret; 2358 } else { 2359 mt7530_port_disable(ds, i); 2360 2361 /* Set default PVID to 0 on all user ports */ 2362 mt7530_rmw(priv, MT7530_PPBV1_P(i), G0_PORT_VID_MASK, 2363 G0_PORT_VID_DEF); 2364 } 2365 2366 /* Enable consistent egress tag */ 2367 mt7530_rmw(priv, MT7530_PVC_P(i), PVC_EG_TAG_MASK, 2368 PVC_EG_TAG(MT7530_VLAN_EG_CONSISTENT)); 2369 } 2370 2371 /* Setup VLAN ID 0 for VLAN-unaware bridges */ 2372 ret = mt7530_setup_vlan0(priv); 2373 if (ret) 2374 return ret; 2375 2376 ds->assisted_learning_on_cpu_port = true; 2377 ds->mtu_enforcement_ingress = true; 2378 2379 /* Flush the FDB table */ 2380 ret = mt7530_fdb_cmd(priv, MT7530_FDB_FLUSH, NULL); 2381 if (ret < 0) 2382 return ret; 2383 2384 return 0; 2385 } 2386 2387 static bool 2388 mt7530_phy_mode_supported(struct dsa_switch *ds, int port, 2389 const struct phylink_link_state *state) 2390 { 2391 struct mt7530_priv *priv = ds->priv; 2392 2393 switch (port) { 2394 case 0 ... 4: /* Internal phy */ 2395 if (state->interface != PHY_INTERFACE_MODE_GMII) 2396 return false; 2397 break; 2398 case 5: /* 2nd cpu port with phy of port 0 or 4 / external phy */ 2399 if (!phy_interface_mode_is_rgmii(state->interface) && 2400 state->interface != PHY_INTERFACE_MODE_MII && 2401 state->interface != PHY_INTERFACE_MODE_GMII) 2402 return false; 2403 break; 2404 case 6: /* 1st cpu port */ 2405 if (state->interface != PHY_INTERFACE_MODE_RGMII && 2406 state->interface != PHY_INTERFACE_MODE_TRGMII) 2407 return false; 2408 break; 2409 default: 2410 dev_err(priv->dev, "%s: unsupported port: %i\n", __func__, 2411 port); 2412 return false; 2413 } 2414 2415 return true; 2416 } 2417 2418 static bool mt7531_is_rgmii_port(struct mt7530_priv *priv, u32 port) 2419 { 2420 return (port == 5) && (priv->p5_intf_sel != P5_INTF_SEL_GMAC5_SGMII); 2421 } 2422 2423 static bool 2424 mt7531_phy_mode_supported(struct dsa_switch *ds, int port, 2425 const struct phylink_link_state *state) 2426 { 2427 struct mt7530_priv *priv = ds->priv; 2428 2429 switch (port) { 2430 case 0 ... 4: /* Internal phy */ 2431 if (state->interface != PHY_INTERFACE_MODE_GMII) 2432 return false; 2433 break; 2434 case 5: /* 2nd cpu port supports either rgmii or sgmii/8023z */ 2435 if (mt7531_is_rgmii_port(priv, port)) 2436 return phy_interface_mode_is_rgmii(state->interface); 2437 fallthrough; 2438 case 6: /* 1st cpu port supports sgmii/8023z only */ 2439 if (state->interface != PHY_INTERFACE_MODE_SGMII && 2440 !phy_interface_mode_is_8023z(state->interface)) 2441 return false; 2442 break; 2443 default: 2444 dev_err(priv->dev, "%s: unsupported port: %i\n", __func__, 2445 port); 2446 return false; 2447 } 2448 2449 return true; 2450 } 2451 2452 static bool 2453 mt753x_phy_mode_supported(struct dsa_switch *ds, int port, 2454 const struct phylink_link_state *state) 2455 { 2456 struct mt7530_priv *priv = ds->priv; 2457 2458 return priv->info->phy_mode_supported(ds, port, state); 2459 } 2460 2461 static int 2462 mt753x_pad_setup(struct dsa_switch *ds, const struct phylink_link_state *state) 2463 { 2464 struct mt7530_priv *priv = ds->priv; 2465 2466 return priv->info->pad_setup(ds, state->interface); 2467 } 2468 2469 static int 2470 mt7530_mac_config(struct dsa_switch *ds, int port, unsigned int mode, 2471 phy_interface_t interface) 2472 { 2473 struct mt7530_priv *priv = ds->priv; 2474 2475 /* Only need to setup port5. */ 2476 if (port != 5) 2477 return 0; 2478 2479 mt7530_setup_port5(priv->ds, interface); 2480 2481 return 0; 2482 } 2483 2484 static int mt7531_rgmii_setup(struct mt7530_priv *priv, u32 port, 2485 phy_interface_t interface, 2486 struct phy_device *phydev) 2487 { 2488 u32 val; 2489 2490 if (!mt7531_is_rgmii_port(priv, port)) { 2491 dev_err(priv->dev, "RGMII mode is not available for port %d\n", 2492 port); 2493 return -EINVAL; 2494 } 2495 2496 val = mt7530_read(priv, MT7531_CLKGEN_CTRL); 2497 val |= GP_CLK_EN; 2498 val &= ~GP_MODE_MASK; 2499 val |= GP_MODE(MT7531_GP_MODE_RGMII); 2500 val &= ~CLK_SKEW_IN_MASK; 2501 val |= CLK_SKEW_IN(MT7531_CLK_SKEW_NO_CHG); 2502 val &= ~CLK_SKEW_OUT_MASK; 2503 val |= CLK_SKEW_OUT(MT7531_CLK_SKEW_NO_CHG); 2504 val |= TXCLK_NO_REVERSE | RXCLK_NO_DELAY; 2505 2506 /* Do not adjust rgmii delay when vendor phy driver presents. */ 2507 if (!phydev || phy_driver_is_genphy(phydev)) { 2508 val &= ~(TXCLK_NO_REVERSE | RXCLK_NO_DELAY); 2509 switch (interface) { 2510 case PHY_INTERFACE_MODE_RGMII: 2511 val |= TXCLK_NO_REVERSE; 2512 val |= RXCLK_NO_DELAY; 2513 break; 2514 case PHY_INTERFACE_MODE_RGMII_RXID: 2515 val |= TXCLK_NO_REVERSE; 2516 break; 2517 case PHY_INTERFACE_MODE_RGMII_TXID: 2518 val |= RXCLK_NO_DELAY; 2519 break; 2520 case PHY_INTERFACE_MODE_RGMII_ID: 2521 break; 2522 default: 2523 return -EINVAL; 2524 } 2525 } 2526 mt7530_write(priv, MT7531_CLKGEN_CTRL, val); 2527 2528 return 0; 2529 } 2530 2531 static void mt7531_sgmii_validate(struct mt7530_priv *priv, int port, 2532 unsigned long *supported) 2533 { 2534 /* Port5 supports ethier RGMII or SGMII. 2535 * Port6 supports SGMII only. 2536 */ 2537 switch (port) { 2538 case 5: 2539 if (mt7531_is_rgmii_port(priv, port)) 2540 break; 2541 fallthrough; 2542 case 6: 2543 phylink_set(supported, 1000baseX_Full); 2544 phylink_set(supported, 2500baseX_Full); 2545 phylink_set(supported, 2500baseT_Full); 2546 } 2547 } 2548 2549 static void 2550 mt7531_sgmii_link_up_force(struct dsa_switch *ds, int port, 2551 unsigned int mode, phy_interface_t interface, 2552 int speed, int duplex) 2553 { 2554 struct mt7530_priv *priv = ds->priv; 2555 unsigned int val; 2556 2557 /* For adjusting speed and duplex of SGMII force mode. */ 2558 if (interface != PHY_INTERFACE_MODE_SGMII || 2559 phylink_autoneg_inband(mode)) 2560 return; 2561 2562 /* SGMII force mode setting */ 2563 val = mt7530_read(priv, MT7531_SGMII_MODE(port)); 2564 val &= ~MT7531_SGMII_IF_MODE_MASK; 2565 2566 switch (speed) { 2567 case SPEED_10: 2568 val |= MT7531_SGMII_FORCE_SPEED_10; 2569 break; 2570 case SPEED_100: 2571 val |= MT7531_SGMII_FORCE_SPEED_100; 2572 break; 2573 case SPEED_1000: 2574 val |= MT7531_SGMII_FORCE_SPEED_1000; 2575 break; 2576 } 2577 2578 /* MT7531 SGMII 1G force mode can only work in full duplex mode, 2579 * no matter MT7531_SGMII_FORCE_HALF_DUPLEX is set or not. 2580 */ 2581 if ((speed == SPEED_10 || speed == SPEED_100) && 2582 duplex != DUPLEX_FULL) 2583 val |= MT7531_SGMII_FORCE_HALF_DUPLEX; 2584 2585 mt7530_write(priv, MT7531_SGMII_MODE(port), val); 2586 } 2587 2588 static bool mt753x_is_mac_port(u32 port) 2589 { 2590 return (port == 5 || port == 6); 2591 } 2592 2593 static int mt7531_sgmii_setup_mode_force(struct mt7530_priv *priv, u32 port, 2594 phy_interface_t interface) 2595 { 2596 u32 val; 2597 2598 if (!mt753x_is_mac_port(port)) 2599 return -EINVAL; 2600 2601 mt7530_set(priv, MT7531_QPHY_PWR_STATE_CTRL(port), 2602 MT7531_SGMII_PHYA_PWD); 2603 2604 val = mt7530_read(priv, MT7531_PHYA_CTRL_SIGNAL3(port)); 2605 val &= ~MT7531_RG_TPHY_SPEED_MASK; 2606 /* Setup 2.5 times faster clock for 2.5Gbps data speeds with 10B/8B 2607 * encoding. 2608 */ 2609 val |= (interface == PHY_INTERFACE_MODE_2500BASEX) ? 2610 MT7531_RG_TPHY_SPEED_3_125G : MT7531_RG_TPHY_SPEED_1_25G; 2611 mt7530_write(priv, MT7531_PHYA_CTRL_SIGNAL3(port), val); 2612 2613 mt7530_clear(priv, MT7531_PCS_CONTROL_1(port), MT7531_SGMII_AN_ENABLE); 2614 2615 /* MT7531 SGMII 1G and 2.5G force mode can only work in full duplex 2616 * mode, no matter MT7531_SGMII_FORCE_HALF_DUPLEX is set or not. 2617 */ 2618 mt7530_rmw(priv, MT7531_SGMII_MODE(port), 2619 MT7531_SGMII_IF_MODE_MASK | MT7531_SGMII_REMOTE_FAULT_DIS, 2620 MT7531_SGMII_FORCE_SPEED_1000); 2621 2622 mt7530_write(priv, MT7531_QPHY_PWR_STATE_CTRL(port), 0); 2623 2624 return 0; 2625 } 2626 2627 static int mt7531_sgmii_setup_mode_an(struct mt7530_priv *priv, int port, 2628 phy_interface_t interface) 2629 { 2630 if (!mt753x_is_mac_port(port)) 2631 return -EINVAL; 2632 2633 mt7530_set(priv, MT7531_QPHY_PWR_STATE_CTRL(port), 2634 MT7531_SGMII_PHYA_PWD); 2635 2636 mt7530_rmw(priv, MT7531_PHYA_CTRL_SIGNAL3(port), 2637 MT7531_RG_TPHY_SPEED_MASK, MT7531_RG_TPHY_SPEED_1_25G); 2638 2639 mt7530_set(priv, MT7531_SGMII_MODE(port), 2640 MT7531_SGMII_REMOTE_FAULT_DIS | 2641 MT7531_SGMII_SPEED_DUPLEX_AN); 2642 2643 mt7530_rmw(priv, MT7531_PCS_SPEED_ABILITY(port), 2644 MT7531_SGMII_TX_CONFIG_MASK, 1); 2645 2646 mt7530_set(priv, MT7531_PCS_CONTROL_1(port), MT7531_SGMII_AN_ENABLE); 2647 2648 mt7530_set(priv, MT7531_PCS_CONTROL_1(port), MT7531_SGMII_AN_RESTART); 2649 2650 mt7530_write(priv, MT7531_QPHY_PWR_STATE_CTRL(port), 0); 2651 2652 return 0; 2653 } 2654 2655 static void mt7531_sgmii_restart_an(struct dsa_switch *ds, int port) 2656 { 2657 struct mt7530_priv *priv = ds->priv; 2658 u32 val; 2659 2660 /* Only restart AN when AN is enabled */ 2661 val = mt7530_read(priv, MT7531_PCS_CONTROL_1(port)); 2662 if (val & MT7531_SGMII_AN_ENABLE) { 2663 val |= MT7531_SGMII_AN_RESTART; 2664 mt7530_write(priv, MT7531_PCS_CONTROL_1(port), val); 2665 } 2666 } 2667 2668 static int 2669 mt7531_mac_config(struct dsa_switch *ds, int port, unsigned int mode, 2670 phy_interface_t interface) 2671 { 2672 struct mt7530_priv *priv = ds->priv; 2673 struct phy_device *phydev; 2674 struct dsa_port *dp; 2675 2676 if (!mt753x_is_mac_port(port)) { 2677 dev_err(priv->dev, "port %d is not a MAC port\n", port); 2678 return -EINVAL; 2679 } 2680 2681 switch (interface) { 2682 case PHY_INTERFACE_MODE_RGMII: 2683 case PHY_INTERFACE_MODE_RGMII_ID: 2684 case PHY_INTERFACE_MODE_RGMII_RXID: 2685 case PHY_INTERFACE_MODE_RGMII_TXID: 2686 dp = dsa_to_port(ds, port); 2687 phydev = dp->slave->phydev; 2688 return mt7531_rgmii_setup(priv, port, interface, phydev); 2689 case PHY_INTERFACE_MODE_SGMII: 2690 return mt7531_sgmii_setup_mode_an(priv, port, interface); 2691 case PHY_INTERFACE_MODE_NA: 2692 case PHY_INTERFACE_MODE_1000BASEX: 2693 case PHY_INTERFACE_MODE_2500BASEX: 2694 if (phylink_autoneg_inband(mode)) 2695 return -EINVAL; 2696 2697 return mt7531_sgmii_setup_mode_force(priv, port, interface); 2698 default: 2699 return -EINVAL; 2700 } 2701 2702 return -EINVAL; 2703 } 2704 2705 static int 2706 mt753x_mac_config(struct dsa_switch *ds, int port, unsigned int mode, 2707 const struct phylink_link_state *state) 2708 { 2709 struct mt7530_priv *priv = ds->priv; 2710 2711 return priv->info->mac_port_config(ds, port, mode, state->interface); 2712 } 2713 2714 static void 2715 mt753x_phylink_mac_config(struct dsa_switch *ds, int port, unsigned int mode, 2716 const struct phylink_link_state *state) 2717 { 2718 struct mt7530_priv *priv = ds->priv; 2719 u32 mcr_cur, mcr_new; 2720 2721 if (!mt753x_phy_mode_supported(ds, port, state)) 2722 goto unsupported; 2723 2724 switch (port) { 2725 case 0 ... 4: /* Internal phy */ 2726 if (state->interface != PHY_INTERFACE_MODE_GMII) 2727 goto unsupported; 2728 break; 2729 case 5: /* 2nd cpu port with phy of port 0 or 4 / external phy */ 2730 if (priv->p5_interface == state->interface) 2731 break; 2732 2733 if (mt753x_mac_config(ds, port, mode, state) < 0) 2734 goto unsupported; 2735 2736 if (priv->p5_intf_sel != P5_DISABLED) 2737 priv->p5_interface = state->interface; 2738 break; 2739 case 6: /* 1st cpu port */ 2740 if (priv->p6_interface == state->interface) 2741 break; 2742 2743 mt753x_pad_setup(ds, state); 2744 2745 if (mt753x_mac_config(ds, port, mode, state) < 0) 2746 goto unsupported; 2747 2748 priv->p6_interface = state->interface; 2749 break; 2750 default: 2751 unsupported: 2752 dev_err(ds->dev, "%s: unsupported %s port: %i\n", 2753 __func__, phy_modes(state->interface), port); 2754 return; 2755 } 2756 2757 if (phylink_autoneg_inband(mode) && 2758 state->interface != PHY_INTERFACE_MODE_SGMII) { 2759 dev_err(ds->dev, "%s: in-band negotiation unsupported\n", 2760 __func__); 2761 return; 2762 } 2763 2764 mcr_cur = mt7530_read(priv, MT7530_PMCR_P(port)); 2765 mcr_new = mcr_cur; 2766 mcr_new &= ~PMCR_LINK_SETTINGS_MASK; 2767 mcr_new |= PMCR_IFG_XMIT(1) | PMCR_MAC_MODE | PMCR_BACKOFF_EN | 2768 PMCR_BACKPR_EN | PMCR_FORCE_MODE_ID(priv->id); 2769 2770 /* Are we connected to external phy */ 2771 if (port == 5 && dsa_is_user_port(ds, 5)) 2772 mcr_new |= PMCR_EXT_PHY; 2773 2774 if (mcr_new != mcr_cur) 2775 mt7530_write(priv, MT7530_PMCR_P(port), mcr_new); 2776 } 2777 2778 static void 2779 mt753x_phylink_mac_an_restart(struct dsa_switch *ds, int port) 2780 { 2781 struct mt7530_priv *priv = ds->priv; 2782 2783 if (!priv->info->mac_pcs_an_restart) 2784 return; 2785 2786 priv->info->mac_pcs_an_restart(ds, port); 2787 } 2788 2789 static void mt753x_phylink_mac_link_down(struct dsa_switch *ds, int port, 2790 unsigned int mode, 2791 phy_interface_t interface) 2792 { 2793 struct mt7530_priv *priv = ds->priv; 2794 2795 mt7530_clear(priv, MT7530_PMCR_P(port), PMCR_LINK_SETTINGS_MASK); 2796 } 2797 2798 static void mt753x_mac_pcs_link_up(struct dsa_switch *ds, int port, 2799 unsigned int mode, phy_interface_t interface, 2800 int speed, int duplex) 2801 { 2802 struct mt7530_priv *priv = ds->priv; 2803 2804 if (!priv->info->mac_pcs_link_up) 2805 return; 2806 2807 priv->info->mac_pcs_link_up(ds, port, mode, interface, speed, duplex); 2808 } 2809 2810 static void mt753x_phylink_mac_link_up(struct dsa_switch *ds, int port, 2811 unsigned int mode, 2812 phy_interface_t interface, 2813 struct phy_device *phydev, 2814 int speed, int duplex, 2815 bool tx_pause, bool rx_pause) 2816 { 2817 struct mt7530_priv *priv = ds->priv; 2818 u32 mcr; 2819 2820 mt753x_mac_pcs_link_up(ds, port, mode, interface, speed, duplex); 2821 2822 mcr = PMCR_RX_EN | PMCR_TX_EN | PMCR_FORCE_LNK; 2823 2824 /* MT753x MAC works in 1G full duplex mode for all up-clocked 2825 * variants. 2826 */ 2827 if (interface == PHY_INTERFACE_MODE_TRGMII || 2828 (phy_interface_mode_is_8023z(interface))) { 2829 speed = SPEED_1000; 2830 duplex = DUPLEX_FULL; 2831 } 2832 2833 switch (speed) { 2834 case SPEED_1000: 2835 mcr |= PMCR_FORCE_SPEED_1000; 2836 break; 2837 case SPEED_100: 2838 mcr |= PMCR_FORCE_SPEED_100; 2839 break; 2840 } 2841 if (duplex == DUPLEX_FULL) { 2842 mcr |= PMCR_FORCE_FDX; 2843 if (tx_pause) 2844 mcr |= PMCR_TX_FC_EN; 2845 if (rx_pause) 2846 mcr |= PMCR_RX_FC_EN; 2847 } 2848 2849 if (mode == MLO_AN_PHY && phydev && phy_init_eee(phydev, 0) >= 0) { 2850 switch (speed) { 2851 case SPEED_1000: 2852 mcr |= PMCR_FORCE_EEE1G; 2853 break; 2854 case SPEED_100: 2855 mcr |= PMCR_FORCE_EEE100; 2856 break; 2857 } 2858 } 2859 2860 mt7530_set(priv, MT7530_PMCR_P(port), mcr); 2861 } 2862 2863 static int 2864 mt7531_cpu_port_config(struct dsa_switch *ds, int port) 2865 { 2866 struct mt7530_priv *priv = ds->priv; 2867 phy_interface_t interface; 2868 int speed; 2869 int ret; 2870 2871 switch (port) { 2872 case 5: 2873 if (mt7531_is_rgmii_port(priv, port)) 2874 interface = PHY_INTERFACE_MODE_RGMII; 2875 else 2876 interface = PHY_INTERFACE_MODE_2500BASEX; 2877 2878 priv->p5_interface = interface; 2879 break; 2880 case 6: 2881 interface = PHY_INTERFACE_MODE_2500BASEX; 2882 2883 mt7531_pad_setup(ds, interface); 2884 2885 priv->p6_interface = interface; 2886 break; 2887 default: 2888 return -EINVAL; 2889 } 2890 2891 if (interface == PHY_INTERFACE_MODE_2500BASEX) 2892 speed = SPEED_2500; 2893 else 2894 speed = SPEED_1000; 2895 2896 ret = mt7531_mac_config(ds, port, MLO_AN_FIXED, interface); 2897 if (ret) 2898 return ret; 2899 mt7530_write(priv, MT7530_PMCR_P(port), 2900 PMCR_CPU_PORT_SETTING(priv->id)); 2901 mt753x_phylink_mac_link_up(ds, port, MLO_AN_FIXED, interface, NULL, 2902 speed, DUPLEX_FULL, true, true); 2903 2904 return 0; 2905 } 2906 2907 static void 2908 mt7530_mac_port_validate(struct dsa_switch *ds, int port, 2909 unsigned long *supported) 2910 { 2911 if (port == 5) 2912 phylink_set(supported, 1000baseX_Full); 2913 } 2914 2915 static void mt7531_mac_port_validate(struct dsa_switch *ds, int port, 2916 unsigned long *supported) 2917 { 2918 struct mt7530_priv *priv = ds->priv; 2919 2920 mt7531_sgmii_validate(priv, port, supported); 2921 } 2922 2923 static void 2924 mt753x_phylink_validate(struct dsa_switch *ds, int port, 2925 unsigned long *supported, 2926 struct phylink_link_state *state) 2927 { 2928 __ETHTOOL_DECLARE_LINK_MODE_MASK(mask) = { 0, }; 2929 struct mt7530_priv *priv = ds->priv; 2930 2931 if (state->interface != PHY_INTERFACE_MODE_NA && 2932 !mt753x_phy_mode_supported(ds, port, state)) { 2933 linkmode_zero(supported); 2934 return; 2935 } 2936 2937 phylink_set_port_modes(mask); 2938 2939 if (state->interface != PHY_INTERFACE_MODE_TRGMII || 2940 !phy_interface_mode_is_8023z(state->interface)) { 2941 phylink_set(mask, 10baseT_Half); 2942 phylink_set(mask, 10baseT_Full); 2943 phylink_set(mask, 100baseT_Half); 2944 phylink_set(mask, 100baseT_Full); 2945 phylink_set(mask, Autoneg); 2946 } 2947 2948 /* This switch only supports 1G full-duplex. */ 2949 if (state->interface != PHY_INTERFACE_MODE_MII) 2950 phylink_set(mask, 1000baseT_Full); 2951 2952 priv->info->mac_port_validate(ds, port, mask); 2953 2954 phylink_set(mask, Pause); 2955 phylink_set(mask, Asym_Pause); 2956 2957 linkmode_and(supported, supported, mask); 2958 linkmode_and(state->advertising, state->advertising, mask); 2959 2960 /* We can only operate at 2500BaseX or 1000BaseX. If requested 2961 * to advertise both, only report advertising at 2500BaseX. 2962 */ 2963 phylink_helper_basex_speed(state); 2964 } 2965 2966 static int 2967 mt7530_phylink_mac_link_state(struct dsa_switch *ds, int port, 2968 struct phylink_link_state *state) 2969 { 2970 struct mt7530_priv *priv = ds->priv; 2971 u32 pmsr; 2972 2973 if (port < 0 || port >= MT7530_NUM_PORTS) 2974 return -EINVAL; 2975 2976 pmsr = mt7530_read(priv, MT7530_PMSR_P(port)); 2977 2978 state->link = (pmsr & PMSR_LINK); 2979 state->an_complete = state->link; 2980 state->duplex = !!(pmsr & PMSR_DPX); 2981 2982 switch (pmsr & PMSR_SPEED_MASK) { 2983 case PMSR_SPEED_10: 2984 state->speed = SPEED_10; 2985 break; 2986 case PMSR_SPEED_100: 2987 state->speed = SPEED_100; 2988 break; 2989 case PMSR_SPEED_1000: 2990 state->speed = SPEED_1000; 2991 break; 2992 default: 2993 state->speed = SPEED_UNKNOWN; 2994 break; 2995 } 2996 2997 state->pause &= ~(MLO_PAUSE_RX | MLO_PAUSE_TX); 2998 if (pmsr & PMSR_RX_FC) 2999 state->pause |= MLO_PAUSE_RX; 3000 if (pmsr & PMSR_TX_FC) 3001 state->pause |= MLO_PAUSE_TX; 3002 3003 return 1; 3004 } 3005 3006 static int 3007 mt7531_sgmii_pcs_get_state_an(struct mt7530_priv *priv, int port, 3008 struct phylink_link_state *state) 3009 { 3010 u32 status, val; 3011 u16 config_reg; 3012 3013 status = mt7530_read(priv, MT7531_PCS_CONTROL_1(port)); 3014 state->link = !!(status & MT7531_SGMII_LINK_STATUS); 3015 if (state->interface == PHY_INTERFACE_MODE_SGMII && 3016 (status & MT7531_SGMII_AN_ENABLE)) { 3017 val = mt7530_read(priv, MT7531_PCS_SPEED_ABILITY(port)); 3018 config_reg = val >> 16; 3019 3020 switch (config_reg & LPA_SGMII_SPD_MASK) { 3021 case LPA_SGMII_1000: 3022 state->speed = SPEED_1000; 3023 break; 3024 case LPA_SGMII_100: 3025 state->speed = SPEED_100; 3026 break; 3027 case LPA_SGMII_10: 3028 state->speed = SPEED_10; 3029 break; 3030 default: 3031 dev_err(priv->dev, "invalid sgmii PHY speed\n"); 3032 state->link = false; 3033 return -EINVAL; 3034 } 3035 3036 if (config_reg & LPA_SGMII_FULL_DUPLEX) 3037 state->duplex = DUPLEX_FULL; 3038 else 3039 state->duplex = DUPLEX_HALF; 3040 } 3041 3042 return 0; 3043 } 3044 3045 static int 3046 mt7531_phylink_mac_link_state(struct dsa_switch *ds, int port, 3047 struct phylink_link_state *state) 3048 { 3049 struct mt7530_priv *priv = ds->priv; 3050 3051 if (state->interface == PHY_INTERFACE_MODE_SGMII) 3052 return mt7531_sgmii_pcs_get_state_an(priv, port, state); 3053 3054 return -EOPNOTSUPP; 3055 } 3056 3057 static int 3058 mt753x_phylink_mac_link_state(struct dsa_switch *ds, int port, 3059 struct phylink_link_state *state) 3060 { 3061 struct mt7530_priv *priv = ds->priv; 3062 3063 return priv->info->mac_port_get_state(ds, port, state); 3064 } 3065 3066 static int 3067 mt753x_setup(struct dsa_switch *ds) 3068 { 3069 struct mt7530_priv *priv = ds->priv; 3070 int ret = priv->info->sw_setup(ds); 3071 3072 if (ret) 3073 return ret; 3074 3075 ret = mt7530_setup_irq(priv); 3076 if (ret) 3077 return ret; 3078 3079 ret = mt7530_setup_mdio(priv); 3080 if (ret && priv->irq) 3081 mt7530_free_irq_common(priv); 3082 3083 return ret; 3084 } 3085 3086 static int mt753x_get_mac_eee(struct dsa_switch *ds, int port, 3087 struct ethtool_eee *e) 3088 { 3089 struct mt7530_priv *priv = ds->priv; 3090 u32 eeecr = mt7530_read(priv, MT7530_PMEEECR_P(port)); 3091 3092 e->tx_lpi_enabled = !(eeecr & LPI_MODE_EN); 3093 e->tx_lpi_timer = GET_LPI_THRESH(eeecr); 3094 3095 return 0; 3096 } 3097 3098 static int mt753x_set_mac_eee(struct dsa_switch *ds, int port, 3099 struct ethtool_eee *e) 3100 { 3101 struct mt7530_priv *priv = ds->priv; 3102 u32 set, mask = LPI_THRESH_MASK | LPI_MODE_EN; 3103 3104 if (e->tx_lpi_timer > 0xFFF) 3105 return -EINVAL; 3106 3107 set = SET_LPI_THRESH(e->tx_lpi_timer); 3108 if (!e->tx_lpi_enabled) 3109 /* Force LPI Mode without a delay */ 3110 set |= LPI_MODE_EN; 3111 mt7530_rmw(priv, MT7530_PMEEECR_P(port), mask, set); 3112 3113 return 0; 3114 } 3115 3116 static const struct dsa_switch_ops mt7530_switch_ops = { 3117 .get_tag_protocol = mtk_get_tag_protocol, 3118 .setup = mt753x_setup, 3119 .get_strings = mt7530_get_strings, 3120 .get_ethtool_stats = mt7530_get_ethtool_stats, 3121 .get_sset_count = mt7530_get_sset_count, 3122 .set_ageing_time = mt7530_set_ageing_time, 3123 .port_enable = mt7530_port_enable, 3124 .port_disable = mt7530_port_disable, 3125 .port_change_mtu = mt7530_port_change_mtu, 3126 .port_max_mtu = mt7530_port_max_mtu, 3127 .port_stp_state_set = mt7530_stp_state_set, 3128 .port_pre_bridge_flags = mt7530_port_pre_bridge_flags, 3129 .port_bridge_flags = mt7530_port_bridge_flags, 3130 .port_bridge_join = mt7530_port_bridge_join, 3131 .port_bridge_leave = mt7530_port_bridge_leave, 3132 .port_fdb_add = mt7530_port_fdb_add, 3133 .port_fdb_del = mt7530_port_fdb_del, 3134 .port_fdb_dump = mt7530_port_fdb_dump, 3135 .port_mdb_add = mt7530_port_mdb_add, 3136 .port_mdb_del = mt7530_port_mdb_del, 3137 .port_vlan_filtering = mt7530_port_vlan_filtering, 3138 .port_vlan_add = mt7530_port_vlan_add, 3139 .port_vlan_del = mt7530_port_vlan_del, 3140 .port_mirror_add = mt753x_port_mirror_add, 3141 .port_mirror_del = mt753x_port_mirror_del, 3142 .phylink_validate = mt753x_phylink_validate, 3143 .phylink_mac_link_state = mt753x_phylink_mac_link_state, 3144 .phylink_mac_config = mt753x_phylink_mac_config, 3145 .phylink_mac_an_restart = mt753x_phylink_mac_an_restart, 3146 .phylink_mac_link_down = mt753x_phylink_mac_link_down, 3147 .phylink_mac_link_up = mt753x_phylink_mac_link_up, 3148 .get_mac_eee = mt753x_get_mac_eee, 3149 .set_mac_eee = mt753x_set_mac_eee, 3150 }; 3151 3152 static const struct mt753x_info mt753x_table[] = { 3153 [ID_MT7621] = { 3154 .id = ID_MT7621, 3155 .sw_setup = mt7530_setup, 3156 .phy_read = mt7530_phy_read, 3157 .phy_write = mt7530_phy_write, 3158 .pad_setup = mt7530_pad_clk_setup, 3159 .phy_mode_supported = mt7530_phy_mode_supported, 3160 .mac_port_validate = mt7530_mac_port_validate, 3161 .mac_port_get_state = mt7530_phylink_mac_link_state, 3162 .mac_port_config = mt7530_mac_config, 3163 }, 3164 [ID_MT7530] = { 3165 .id = ID_MT7530, 3166 .sw_setup = mt7530_setup, 3167 .phy_read = mt7530_phy_read, 3168 .phy_write = mt7530_phy_write, 3169 .pad_setup = mt7530_pad_clk_setup, 3170 .phy_mode_supported = mt7530_phy_mode_supported, 3171 .mac_port_validate = mt7530_mac_port_validate, 3172 .mac_port_get_state = mt7530_phylink_mac_link_state, 3173 .mac_port_config = mt7530_mac_config, 3174 }, 3175 [ID_MT7531] = { 3176 .id = ID_MT7531, 3177 .sw_setup = mt7531_setup, 3178 .phy_read = mt7531_ind_phy_read, 3179 .phy_write = mt7531_ind_phy_write, 3180 .pad_setup = mt7531_pad_setup, 3181 .cpu_port_config = mt7531_cpu_port_config, 3182 .phy_mode_supported = mt7531_phy_mode_supported, 3183 .mac_port_validate = mt7531_mac_port_validate, 3184 .mac_port_get_state = mt7531_phylink_mac_link_state, 3185 .mac_port_config = mt7531_mac_config, 3186 .mac_pcs_an_restart = mt7531_sgmii_restart_an, 3187 .mac_pcs_link_up = mt7531_sgmii_link_up_force, 3188 }, 3189 }; 3190 3191 static const struct of_device_id mt7530_of_match[] = { 3192 { .compatible = "mediatek,mt7621", .data = &mt753x_table[ID_MT7621], }, 3193 { .compatible = "mediatek,mt7530", .data = &mt753x_table[ID_MT7530], }, 3194 { .compatible = "mediatek,mt7531", .data = &mt753x_table[ID_MT7531], }, 3195 { /* sentinel */ }, 3196 }; 3197 MODULE_DEVICE_TABLE(of, mt7530_of_match); 3198 3199 static int 3200 mt7530_probe(struct mdio_device *mdiodev) 3201 { 3202 struct mt7530_priv *priv; 3203 struct device_node *dn; 3204 3205 dn = mdiodev->dev.of_node; 3206 3207 priv = devm_kzalloc(&mdiodev->dev, sizeof(*priv), GFP_KERNEL); 3208 if (!priv) 3209 return -ENOMEM; 3210 3211 priv->ds = devm_kzalloc(&mdiodev->dev, sizeof(*priv->ds), GFP_KERNEL); 3212 if (!priv->ds) 3213 return -ENOMEM; 3214 3215 priv->ds->dev = &mdiodev->dev; 3216 priv->ds->num_ports = MT7530_NUM_PORTS; 3217 3218 /* Use medatek,mcm property to distinguish hardware type that would 3219 * casues a little bit differences on power-on sequence. 3220 */ 3221 priv->mcm = of_property_read_bool(dn, "mediatek,mcm"); 3222 if (priv->mcm) { 3223 dev_info(&mdiodev->dev, "MT7530 adapts as multi-chip module\n"); 3224 3225 priv->rstc = devm_reset_control_get(&mdiodev->dev, "mcm"); 3226 if (IS_ERR(priv->rstc)) { 3227 dev_err(&mdiodev->dev, "Couldn't get our reset line\n"); 3228 return PTR_ERR(priv->rstc); 3229 } 3230 } 3231 3232 /* Get the hardware identifier from the devicetree node. 3233 * We will need it for some of the clock and regulator setup. 3234 */ 3235 priv->info = of_device_get_match_data(&mdiodev->dev); 3236 if (!priv->info) 3237 return -EINVAL; 3238 3239 /* Sanity check if these required device operations are filled 3240 * properly. 3241 */ 3242 if (!priv->info->sw_setup || !priv->info->pad_setup || 3243 !priv->info->phy_read || !priv->info->phy_write || 3244 !priv->info->phy_mode_supported || 3245 !priv->info->mac_port_validate || 3246 !priv->info->mac_port_get_state || !priv->info->mac_port_config) 3247 return -EINVAL; 3248 3249 priv->id = priv->info->id; 3250 3251 if (priv->id == ID_MT7530) { 3252 priv->core_pwr = devm_regulator_get(&mdiodev->dev, "core"); 3253 if (IS_ERR(priv->core_pwr)) 3254 return PTR_ERR(priv->core_pwr); 3255 3256 priv->io_pwr = devm_regulator_get(&mdiodev->dev, "io"); 3257 if (IS_ERR(priv->io_pwr)) 3258 return PTR_ERR(priv->io_pwr); 3259 } 3260 3261 /* Not MCM that indicates switch works as the remote standalone 3262 * integrated circuit so the GPIO pin would be used to complete 3263 * the reset, otherwise memory-mapped register accessing used 3264 * through syscon provides in the case of MCM. 3265 */ 3266 if (!priv->mcm) { 3267 priv->reset = devm_gpiod_get_optional(&mdiodev->dev, "reset", 3268 GPIOD_OUT_LOW); 3269 if (IS_ERR(priv->reset)) { 3270 dev_err(&mdiodev->dev, "Couldn't get our reset line\n"); 3271 return PTR_ERR(priv->reset); 3272 } 3273 } 3274 3275 priv->bus = mdiodev->bus; 3276 priv->dev = &mdiodev->dev; 3277 priv->ds->priv = priv; 3278 priv->ds->ops = &mt7530_switch_ops; 3279 mutex_init(&priv->reg_mutex); 3280 dev_set_drvdata(&mdiodev->dev, priv); 3281 3282 return dsa_register_switch(priv->ds); 3283 } 3284 3285 static void 3286 mt7530_remove(struct mdio_device *mdiodev) 3287 { 3288 struct mt7530_priv *priv = dev_get_drvdata(&mdiodev->dev); 3289 int ret = 0; 3290 3291 if (!priv) 3292 return; 3293 3294 ret = regulator_disable(priv->core_pwr); 3295 if (ret < 0) 3296 dev_err(priv->dev, 3297 "Failed to disable core power: %d\n", ret); 3298 3299 ret = regulator_disable(priv->io_pwr); 3300 if (ret < 0) 3301 dev_err(priv->dev, "Failed to disable io pwr: %d\n", 3302 ret); 3303 3304 if (priv->irq) 3305 mt7530_free_irq(priv); 3306 3307 dsa_unregister_switch(priv->ds); 3308 mutex_destroy(&priv->reg_mutex); 3309 3310 dev_set_drvdata(&mdiodev->dev, NULL); 3311 } 3312 3313 static void mt7530_shutdown(struct mdio_device *mdiodev) 3314 { 3315 struct mt7530_priv *priv = dev_get_drvdata(&mdiodev->dev); 3316 3317 if (!priv) 3318 return; 3319 3320 dsa_switch_shutdown(priv->ds); 3321 3322 dev_set_drvdata(&mdiodev->dev, NULL); 3323 } 3324 3325 static struct mdio_driver mt7530_mdio_driver = { 3326 .probe = mt7530_probe, 3327 .remove = mt7530_remove, 3328 .shutdown = mt7530_shutdown, 3329 .mdiodrv.driver = { 3330 .name = "mt7530", 3331 .of_match_table = mt7530_of_match, 3332 }, 3333 }; 3334 3335 mdio_module_driver(mt7530_mdio_driver); 3336 3337 MODULE_AUTHOR("Sean Wang <sean.wang@mediatek.com>"); 3338 MODULE_DESCRIPTION("Driver for Mediatek MT7530 Switch"); 3339 MODULE_LICENSE("GPL"); 3340