1 // SPDX-License-Identifier: GPL-2.0 2 /* 3 * Microchip KSZ9477 switch driver main logic 4 * 5 * Copyright (C) 2017-2019 Microchip Technology Inc. 6 */ 7 8 #include <linux/kernel.h> 9 #include <linux/module.h> 10 #include <linux/iopoll.h> 11 #include <linux/platform_data/microchip-ksz.h> 12 #include <linux/phy.h> 13 #include <linux/if_bridge.h> 14 #include <net/dsa.h> 15 #include <net/switchdev.h> 16 17 #include "ksz9477_reg.h" 18 #include "ksz_common.h" 19 20 /* Used with variable features to indicate capabilities. */ 21 #define GBIT_SUPPORT BIT(0) 22 #define NEW_XMII BIT(1) 23 #define IS_9893 BIT(2) 24 25 static const struct { 26 int index; 27 char string[ETH_GSTRING_LEN]; 28 } ksz9477_mib_names[TOTAL_SWITCH_COUNTER_NUM] = { 29 { 0x00, "rx_hi" }, 30 { 0x01, "rx_undersize" }, 31 { 0x02, "rx_fragments" }, 32 { 0x03, "rx_oversize" }, 33 { 0x04, "rx_jabbers" }, 34 { 0x05, "rx_symbol_err" }, 35 { 0x06, "rx_crc_err" }, 36 { 0x07, "rx_align_err" }, 37 { 0x08, "rx_mac_ctrl" }, 38 { 0x09, "rx_pause" }, 39 { 0x0A, "rx_bcast" }, 40 { 0x0B, "rx_mcast" }, 41 { 0x0C, "rx_ucast" }, 42 { 0x0D, "rx_64_or_less" }, 43 { 0x0E, "rx_65_127" }, 44 { 0x0F, "rx_128_255" }, 45 { 0x10, "rx_256_511" }, 46 { 0x11, "rx_512_1023" }, 47 { 0x12, "rx_1024_1522" }, 48 { 0x13, "rx_1523_2000" }, 49 { 0x14, "rx_2001" }, 50 { 0x15, "tx_hi" }, 51 { 0x16, "tx_late_col" }, 52 { 0x17, "tx_pause" }, 53 { 0x18, "tx_bcast" }, 54 { 0x19, "tx_mcast" }, 55 { 0x1A, "tx_ucast" }, 56 { 0x1B, "tx_deferred" }, 57 { 0x1C, "tx_total_col" }, 58 { 0x1D, "tx_exc_col" }, 59 { 0x1E, "tx_single_col" }, 60 { 0x1F, "tx_mult_col" }, 61 { 0x80, "rx_total" }, 62 { 0x81, "tx_total" }, 63 { 0x82, "rx_discards" }, 64 { 0x83, "tx_discards" }, 65 }; 66 67 static void ksz_cfg(struct ksz_device *dev, u32 addr, u8 bits, bool set) 68 { 69 regmap_update_bits(dev->regmap[0], addr, bits, set ? bits : 0); 70 } 71 72 static void ksz_port_cfg(struct ksz_device *dev, int port, int offset, u8 bits, 73 bool set) 74 { 75 regmap_update_bits(dev->regmap[0], PORT_CTRL_ADDR(port, offset), 76 bits, set ? bits : 0); 77 } 78 79 static void ksz9477_cfg32(struct ksz_device *dev, u32 addr, u32 bits, bool set) 80 { 81 regmap_update_bits(dev->regmap[2], addr, bits, set ? bits : 0); 82 } 83 84 static void ksz9477_port_cfg32(struct ksz_device *dev, int port, int offset, 85 u32 bits, bool set) 86 { 87 regmap_update_bits(dev->regmap[2], PORT_CTRL_ADDR(port, offset), 88 bits, set ? bits : 0); 89 } 90 91 static int ksz9477_wait_vlan_ctrl_ready(struct ksz_device *dev) 92 { 93 unsigned int val; 94 95 return regmap_read_poll_timeout(dev->regmap[0], REG_SW_VLAN_CTRL, 96 val, !(val & VLAN_START), 10, 1000); 97 } 98 99 static int ksz9477_get_vlan_table(struct ksz_device *dev, u16 vid, 100 u32 *vlan_table) 101 { 102 int ret; 103 104 mutex_lock(&dev->vlan_mutex); 105 106 ksz_write16(dev, REG_SW_VLAN_ENTRY_INDEX__2, vid & VLAN_INDEX_M); 107 ksz_write8(dev, REG_SW_VLAN_CTRL, VLAN_READ | VLAN_START); 108 109 /* wait to be cleared */ 110 ret = ksz9477_wait_vlan_ctrl_ready(dev); 111 if (ret) { 112 dev_dbg(dev->dev, "Failed to read vlan table\n"); 113 goto exit; 114 } 115 116 ksz_read32(dev, REG_SW_VLAN_ENTRY__4, &vlan_table[0]); 117 ksz_read32(dev, REG_SW_VLAN_ENTRY_UNTAG__4, &vlan_table[1]); 118 ksz_read32(dev, REG_SW_VLAN_ENTRY_PORTS__4, &vlan_table[2]); 119 120 ksz_write8(dev, REG_SW_VLAN_CTRL, 0); 121 122 exit: 123 mutex_unlock(&dev->vlan_mutex); 124 125 return ret; 126 } 127 128 static int ksz9477_set_vlan_table(struct ksz_device *dev, u16 vid, 129 u32 *vlan_table) 130 { 131 int ret; 132 133 mutex_lock(&dev->vlan_mutex); 134 135 ksz_write32(dev, REG_SW_VLAN_ENTRY__4, vlan_table[0]); 136 ksz_write32(dev, REG_SW_VLAN_ENTRY_UNTAG__4, vlan_table[1]); 137 ksz_write32(dev, REG_SW_VLAN_ENTRY_PORTS__4, vlan_table[2]); 138 139 ksz_write16(dev, REG_SW_VLAN_ENTRY_INDEX__2, vid & VLAN_INDEX_M); 140 ksz_write8(dev, REG_SW_VLAN_CTRL, VLAN_START | VLAN_WRITE); 141 142 /* wait to be cleared */ 143 ret = ksz9477_wait_vlan_ctrl_ready(dev); 144 if (ret) { 145 dev_dbg(dev->dev, "Failed to write vlan table\n"); 146 goto exit; 147 } 148 149 ksz_write8(dev, REG_SW_VLAN_CTRL, 0); 150 151 /* update vlan cache table */ 152 dev->vlan_cache[vid].table[0] = vlan_table[0]; 153 dev->vlan_cache[vid].table[1] = vlan_table[1]; 154 dev->vlan_cache[vid].table[2] = vlan_table[2]; 155 156 exit: 157 mutex_unlock(&dev->vlan_mutex); 158 159 return ret; 160 } 161 162 static void ksz9477_read_table(struct ksz_device *dev, u32 *table) 163 { 164 ksz_read32(dev, REG_SW_ALU_VAL_A, &table[0]); 165 ksz_read32(dev, REG_SW_ALU_VAL_B, &table[1]); 166 ksz_read32(dev, REG_SW_ALU_VAL_C, &table[2]); 167 ksz_read32(dev, REG_SW_ALU_VAL_D, &table[3]); 168 } 169 170 static void ksz9477_write_table(struct ksz_device *dev, u32 *table) 171 { 172 ksz_write32(dev, REG_SW_ALU_VAL_A, table[0]); 173 ksz_write32(dev, REG_SW_ALU_VAL_B, table[1]); 174 ksz_write32(dev, REG_SW_ALU_VAL_C, table[2]); 175 ksz_write32(dev, REG_SW_ALU_VAL_D, table[3]); 176 } 177 178 static int ksz9477_wait_alu_ready(struct ksz_device *dev) 179 { 180 unsigned int val; 181 182 return regmap_read_poll_timeout(dev->regmap[2], REG_SW_ALU_CTRL__4, 183 val, !(val & ALU_START), 10, 1000); 184 } 185 186 static int ksz9477_wait_alu_sta_ready(struct ksz_device *dev) 187 { 188 unsigned int val; 189 190 return regmap_read_poll_timeout(dev->regmap[2], 191 REG_SW_ALU_STAT_CTRL__4, 192 val, !(val & ALU_STAT_START), 193 10, 1000); 194 } 195 196 static int ksz9477_reset_switch(struct ksz_device *dev) 197 { 198 u8 data8; 199 u32 data32; 200 201 /* reset switch */ 202 ksz_cfg(dev, REG_SW_OPERATION, SW_RESET, true); 203 204 /* turn off SPI DO Edge select */ 205 regmap_update_bits(dev->regmap[0], REG_SW_GLOBAL_SERIAL_CTRL_0, 206 SPI_AUTO_EDGE_DETECTION, 0); 207 208 /* default configuration */ 209 ksz_read8(dev, REG_SW_LUE_CTRL_1, &data8); 210 data8 = SW_AGING_ENABLE | SW_LINK_AUTO_AGING | 211 SW_SRC_ADDR_FILTER | SW_FLUSH_STP_TABLE | SW_FLUSH_MSTP_TABLE; 212 ksz_write8(dev, REG_SW_LUE_CTRL_1, data8); 213 214 /* disable interrupts */ 215 ksz_write32(dev, REG_SW_INT_MASK__4, SWITCH_INT_MASK); 216 ksz_write32(dev, REG_SW_PORT_INT_MASK__4, 0x7F); 217 ksz_read32(dev, REG_SW_PORT_INT_STATUS__4, &data32); 218 219 /* set broadcast storm protection 10% rate */ 220 regmap_update_bits(dev->regmap[1], REG_SW_MAC_CTRL_2, 221 BROADCAST_STORM_RATE, 222 (BROADCAST_STORM_VALUE * 223 BROADCAST_STORM_PROT_RATE) / 100); 224 225 if (dev->synclko_125) 226 ksz_write8(dev, REG_SW_GLOBAL_OUTPUT_CTRL__1, 227 SW_ENABLE_REFCLKO | SW_REFCLKO_IS_125MHZ); 228 229 return 0; 230 } 231 232 static void ksz9477_r_mib_cnt(struct ksz_device *dev, int port, u16 addr, 233 u64 *cnt) 234 { 235 struct ksz_port *p = &dev->ports[port]; 236 unsigned int val; 237 u32 data; 238 int ret; 239 240 /* retain the flush/freeze bit */ 241 data = p->freeze ? MIB_COUNTER_FLUSH_FREEZE : 0; 242 data |= MIB_COUNTER_READ; 243 data |= (addr << MIB_COUNTER_INDEX_S); 244 ksz_pwrite32(dev, port, REG_PORT_MIB_CTRL_STAT__4, data); 245 246 ret = regmap_read_poll_timeout(dev->regmap[2], 247 PORT_CTRL_ADDR(port, REG_PORT_MIB_CTRL_STAT__4), 248 val, !(val & MIB_COUNTER_READ), 10, 1000); 249 /* failed to read MIB. get out of loop */ 250 if (ret) { 251 dev_dbg(dev->dev, "Failed to get MIB\n"); 252 return; 253 } 254 255 /* count resets upon read */ 256 ksz_pread32(dev, port, REG_PORT_MIB_DATA, &data); 257 *cnt += data; 258 } 259 260 static void ksz9477_r_mib_pkt(struct ksz_device *dev, int port, u16 addr, 261 u64 *dropped, u64 *cnt) 262 { 263 addr = ksz9477_mib_names[addr].index; 264 ksz9477_r_mib_cnt(dev, port, addr, cnt); 265 } 266 267 static void ksz9477_freeze_mib(struct ksz_device *dev, int port, bool freeze) 268 { 269 u32 val = freeze ? MIB_COUNTER_FLUSH_FREEZE : 0; 270 struct ksz_port *p = &dev->ports[port]; 271 272 /* enable/disable the port for flush/freeze function */ 273 mutex_lock(&p->mib.cnt_mutex); 274 ksz_pwrite32(dev, port, REG_PORT_MIB_CTRL_STAT__4, val); 275 276 /* used by MIB counter reading code to know freeze is enabled */ 277 p->freeze = freeze; 278 mutex_unlock(&p->mib.cnt_mutex); 279 } 280 281 static void ksz9477_port_init_cnt(struct ksz_device *dev, int port) 282 { 283 struct ksz_port_mib *mib = &dev->ports[port].mib; 284 285 /* flush all enabled port MIB counters */ 286 mutex_lock(&mib->cnt_mutex); 287 ksz_pwrite32(dev, port, REG_PORT_MIB_CTRL_STAT__4, 288 MIB_COUNTER_FLUSH_FREEZE); 289 ksz_write8(dev, REG_SW_MAC_CTRL_6, SW_MIB_COUNTER_FLUSH); 290 ksz_pwrite32(dev, port, REG_PORT_MIB_CTRL_STAT__4, 0); 291 mutex_unlock(&mib->cnt_mutex); 292 293 mib->cnt_ptr = 0; 294 memset(mib->counters, 0, dev->mib_cnt * sizeof(u64)); 295 } 296 297 static enum dsa_tag_protocol ksz9477_get_tag_protocol(struct dsa_switch *ds, 298 int port, 299 enum dsa_tag_protocol mp) 300 { 301 enum dsa_tag_protocol proto = DSA_TAG_PROTO_KSZ9477; 302 struct ksz_device *dev = ds->priv; 303 304 if (dev->features & IS_9893) 305 proto = DSA_TAG_PROTO_KSZ9893; 306 return proto; 307 } 308 309 static int ksz9477_phy_read16(struct dsa_switch *ds, int addr, int reg) 310 { 311 struct ksz_device *dev = ds->priv; 312 u16 val = 0xffff; 313 314 /* No real PHY after this. Simulate the PHY. 315 * A fixed PHY can be setup in the device tree, but this function is 316 * still called for that port during initialization. 317 * For RGMII PHY there is no way to access it so the fixed PHY should 318 * be used. For SGMII PHY the supporting code will be added later. 319 */ 320 if (addr >= dev->phy_port_cnt) { 321 struct ksz_port *p = &dev->ports[addr]; 322 323 switch (reg) { 324 case MII_BMCR: 325 val = 0x1140; 326 break; 327 case MII_BMSR: 328 val = 0x796d; 329 break; 330 case MII_PHYSID1: 331 val = 0x0022; 332 break; 333 case MII_PHYSID2: 334 val = 0x1631; 335 break; 336 case MII_ADVERTISE: 337 val = 0x05e1; 338 break; 339 case MII_LPA: 340 val = 0xc5e1; 341 break; 342 case MII_CTRL1000: 343 val = 0x0700; 344 break; 345 case MII_STAT1000: 346 if (p->phydev.speed == SPEED_1000) 347 val = 0x3800; 348 else 349 val = 0; 350 break; 351 } 352 } else { 353 ksz_pread16(dev, addr, 0x100 + (reg << 1), &val); 354 } 355 356 return val; 357 } 358 359 static int ksz9477_phy_write16(struct dsa_switch *ds, int addr, int reg, 360 u16 val) 361 { 362 struct ksz_device *dev = ds->priv; 363 364 /* No real PHY after this. */ 365 if (addr >= dev->phy_port_cnt) 366 return 0; 367 368 /* No gigabit support. Do not write to this register. */ 369 if (!(dev->features & GBIT_SUPPORT) && reg == MII_CTRL1000) 370 return 0; 371 ksz_pwrite16(dev, addr, 0x100 + (reg << 1), val); 372 373 return 0; 374 } 375 376 static void ksz9477_get_strings(struct dsa_switch *ds, int port, 377 u32 stringset, uint8_t *buf) 378 { 379 int i; 380 381 if (stringset != ETH_SS_STATS) 382 return; 383 384 for (i = 0; i < TOTAL_SWITCH_COUNTER_NUM; i++) { 385 memcpy(buf + i * ETH_GSTRING_LEN, ksz9477_mib_names[i].string, 386 ETH_GSTRING_LEN); 387 } 388 } 389 390 static void ksz9477_cfg_port_member(struct ksz_device *dev, int port, 391 u8 member) 392 { 393 ksz_pwrite32(dev, port, REG_PORT_VLAN_MEMBERSHIP__4, member); 394 dev->ports[port].member = member; 395 } 396 397 static void ksz9477_port_stp_state_set(struct dsa_switch *ds, int port, 398 u8 state) 399 { 400 struct ksz_device *dev = ds->priv; 401 struct ksz_port *p = &dev->ports[port]; 402 u8 data; 403 int member = -1; 404 int forward = dev->member; 405 406 ksz_pread8(dev, port, P_STP_CTRL, &data); 407 data &= ~(PORT_TX_ENABLE | PORT_RX_ENABLE | PORT_LEARN_DISABLE); 408 409 switch (state) { 410 case BR_STATE_DISABLED: 411 data |= PORT_LEARN_DISABLE; 412 if (port != dev->cpu_port) 413 member = 0; 414 break; 415 case BR_STATE_LISTENING: 416 data |= (PORT_RX_ENABLE | PORT_LEARN_DISABLE); 417 if (port != dev->cpu_port && 418 p->stp_state == BR_STATE_DISABLED) 419 member = dev->host_mask | p->vid_member; 420 break; 421 case BR_STATE_LEARNING: 422 data |= PORT_RX_ENABLE; 423 break; 424 case BR_STATE_FORWARDING: 425 data |= (PORT_TX_ENABLE | PORT_RX_ENABLE); 426 427 /* This function is also used internally. */ 428 if (port == dev->cpu_port) 429 break; 430 431 member = dev->host_mask | p->vid_member; 432 mutex_lock(&dev->dev_mutex); 433 434 /* Port is a member of a bridge. */ 435 if (dev->br_member & (1 << port)) { 436 dev->member |= (1 << port); 437 member = dev->member; 438 } 439 mutex_unlock(&dev->dev_mutex); 440 break; 441 case BR_STATE_BLOCKING: 442 data |= PORT_LEARN_DISABLE; 443 if (port != dev->cpu_port && 444 p->stp_state == BR_STATE_DISABLED) 445 member = dev->host_mask | p->vid_member; 446 break; 447 default: 448 dev_err(ds->dev, "invalid STP state: %d\n", state); 449 return; 450 } 451 452 ksz_pwrite8(dev, port, P_STP_CTRL, data); 453 p->stp_state = state; 454 mutex_lock(&dev->dev_mutex); 455 /* Port membership may share register with STP state. */ 456 if (member >= 0 && member != p->member) 457 ksz9477_cfg_port_member(dev, port, (u8)member); 458 459 /* Check if forwarding needs to be updated. */ 460 if (state != BR_STATE_FORWARDING) { 461 if (dev->br_member & (1 << port)) 462 dev->member &= ~(1 << port); 463 } 464 465 /* When topology has changed the function ksz_update_port_member 466 * should be called to modify port forwarding behavior. 467 */ 468 if (forward != dev->member) 469 ksz_update_port_member(dev, port); 470 mutex_unlock(&dev->dev_mutex); 471 } 472 473 static void ksz9477_flush_dyn_mac_table(struct ksz_device *dev, int port) 474 { 475 u8 data; 476 477 regmap_update_bits(dev->regmap[0], REG_SW_LUE_CTRL_2, 478 SW_FLUSH_OPTION_M << SW_FLUSH_OPTION_S, 479 SW_FLUSH_OPTION_DYN_MAC << SW_FLUSH_OPTION_S); 480 481 if (port < dev->mib_port_cnt) { 482 /* flush individual port */ 483 ksz_pread8(dev, port, P_STP_CTRL, &data); 484 if (!(data & PORT_LEARN_DISABLE)) 485 ksz_pwrite8(dev, port, P_STP_CTRL, 486 data | PORT_LEARN_DISABLE); 487 ksz_cfg(dev, S_FLUSH_TABLE_CTRL, SW_FLUSH_DYN_MAC_TABLE, true); 488 ksz_pwrite8(dev, port, P_STP_CTRL, data); 489 } else { 490 /* flush all */ 491 ksz_cfg(dev, S_FLUSH_TABLE_CTRL, SW_FLUSH_STP_TABLE, true); 492 } 493 } 494 495 static int ksz9477_port_vlan_filtering(struct dsa_switch *ds, int port, 496 bool flag) 497 { 498 struct ksz_device *dev = ds->priv; 499 500 if (flag) { 501 ksz_port_cfg(dev, port, REG_PORT_LUE_CTRL, 502 PORT_VLAN_LOOKUP_VID_0, true); 503 ksz_cfg(dev, REG_SW_LUE_CTRL_0, SW_VLAN_ENABLE, true); 504 } else { 505 ksz_cfg(dev, REG_SW_LUE_CTRL_0, SW_VLAN_ENABLE, false); 506 ksz_port_cfg(dev, port, REG_PORT_LUE_CTRL, 507 PORT_VLAN_LOOKUP_VID_0, false); 508 } 509 510 return 0; 511 } 512 513 static void ksz9477_port_vlan_add(struct dsa_switch *ds, int port, 514 const struct switchdev_obj_port_vlan *vlan) 515 { 516 struct ksz_device *dev = ds->priv; 517 u32 vlan_table[3]; 518 u16 vid; 519 bool untagged = vlan->flags & BRIDGE_VLAN_INFO_UNTAGGED; 520 521 for (vid = vlan->vid_begin; vid <= vlan->vid_end; vid++) { 522 if (ksz9477_get_vlan_table(dev, vid, vlan_table)) { 523 dev_dbg(dev->dev, "Failed to get vlan table\n"); 524 return; 525 } 526 527 vlan_table[0] = VLAN_VALID | (vid & VLAN_FID_M); 528 if (untagged) 529 vlan_table[1] |= BIT(port); 530 else 531 vlan_table[1] &= ~BIT(port); 532 vlan_table[1] &= ~(BIT(dev->cpu_port)); 533 534 vlan_table[2] |= BIT(port) | BIT(dev->cpu_port); 535 536 if (ksz9477_set_vlan_table(dev, vid, vlan_table)) { 537 dev_dbg(dev->dev, "Failed to set vlan table\n"); 538 return; 539 } 540 541 /* change PVID */ 542 if (vlan->flags & BRIDGE_VLAN_INFO_PVID) 543 ksz_pwrite16(dev, port, REG_PORT_DEFAULT_VID, vid); 544 } 545 } 546 547 static int ksz9477_port_vlan_del(struct dsa_switch *ds, int port, 548 const struct switchdev_obj_port_vlan *vlan) 549 { 550 struct ksz_device *dev = ds->priv; 551 bool untagged = vlan->flags & BRIDGE_VLAN_INFO_UNTAGGED; 552 u32 vlan_table[3]; 553 u16 vid; 554 u16 pvid; 555 556 ksz_pread16(dev, port, REG_PORT_DEFAULT_VID, &pvid); 557 pvid = pvid & 0xFFF; 558 559 for (vid = vlan->vid_begin; vid <= vlan->vid_end; vid++) { 560 if (ksz9477_get_vlan_table(dev, vid, vlan_table)) { 561 dev_dbg(dev->dev, "Failed to get vlan table\n"); 562 return -ETIMEDOUT; 563 } 564 565 vlan_table[2] &= ~BIT(port); 566 567 if (pvid == vid) 568 pvid = 1; 569 570 if (untagged) 571 vlan_table[1] &= ~BIT(port); 572 573 if (ksz9477_set_vlan_table(dev, vid, vlan_table)) { 574 dev_dbg(dev->dev, "Failed to set vlan table\n"); 575 return -ETIMEDOUT; 576 } 577 } 578 579 ksz_pwrite16(dev, port, REG_PORT_DEFAULT_VID, pvid); 580 581 return 0; 582 } 583 584 static int ksz9477_port_fdb_add(struct dsa_switch *ds, int port, 585 const unsigned char *addr, u16 vid) 586 { 587 struct ksz_device *dev = ds->priv; 588 u32 alu_table[4]; 589 u32 data; 590 int ret = 0; 591 592 mutex_lock(&dev->alu_mutex); 593 594 /* find any entry with mac & vid */ 595 data = vid << ALU_FID_INDEX_S; 596 data |= ((addr[0] << 8) | addr[1]); 597 ksz_write32(dev, REG_SW_ALU_INDEX_0, data); 598 599 data = ((addr[2] << 24) | (addr[3] << 16)); 600 data |= ((addr[4] << 8) | addr[5]); 601 ksz_write32(dev, REG_SW_ALU_INDEX_1, data); 602 603 /* start read operation */ 604 ksz_write32(dev, REG_SW_ALU_CTRL__4, ALU_READ | ALU_START); 605 606 /* wait to be finished */ 607 ret = ksz9477_wait_alu_ready(dev); 608 if (ret) { 609 dev_dbg(dev->dev, "Failed to read ALU\n"); 610 goto exit; 611 } 612 613 /* read ALU entry */ 614 ksz9477_read_table(dev, alu_table); 615 616 /* update ALU entry */ 617 alu_table[0] = ALU_V_STATIC_VALID; 618 alu_table[1] |= BIT(port); 619 if (vid) 620 alu_table[1] |= ALU_V_USE_FID; 621 alu_table[2] = (vid << ALU_V_FID_S); 622 alu_table[2] |= ((addr[0] << 8) | addr[1]); 623 alu_table[3] = ((addr[2] << 24) | (addr[3] << 16)); 624 alu_table[3] |= ((addr[4] << 8) | addr[5]); 625 626 ksz9477_write_table(dev, alu_table); 627 628 ksz_write32(dev, REG_SW_ALU_CTRL__4, ALU_WRITE | ALU_START); 629 630 /* wait to be finished */ 631 ret = ksz9477_wait_alu_ready(dev); 632 if (ret) 633 dev_dbg(dev->dev, "Failed to write ALU\n"); 634 635 exit: 636 mutex_unlock(&dev->alu_mutex); 637 638 return ret; 639 } 640 641 static int ksz9477_port_fdb_del(struct dsa_switch *ds, int port, 642 const unsigned char *addr, u16 vid) 643 { 644 struct ksz_device *dev = ds->priv; 645 u32 alu_table[4]; 646 u32 data; 647 int ret = 0; 648 649 mutex_lock(&dev->alu_mutex); 650 651 /* read any entry with mac & vid */ 652 data = vid << ALU_FID_INDEX_S; 653 data |= ((addr[0] << 8) | addr[1]); 654 ksz_write32(dev, REG_SW_ALU_INDEX_0, data); 655 656 data = ((addr[2] << 24) | (addr[3] << 16)); 657 data |= ((addr[4] << 8) | addr[5]); 658 ksz_write32(dev, REG_SW_ALU_INDEX_1, data); 659 660 /* start read operation */ 661 ksz_write32(dev, REG_SW_ALU_CTRL__4, ALU_READ | ALU_START); 662 663 /* wait to be finished */ 664 ret = ksz9477_wait_alu_ready(dev); 665 if (ret) { 666 dev_dbg(dev->dev, "Failed to read ALU\n"); 667 goto exit; 668 } 669 670 ksz_read32(dev, REG_SW_ALU_VAL_A, &alu_table[0]); 671 if (alu_table[0] & ALU_V_STATIC_VALID) { 672 ksz_read32(dev, REG_SW_ALU_VAL_B, &alu_table[1]); 673 ksz_read32(dev, REG_SW_ALU_VAL_C, &alu_table[2]); 674 ksz_read32(dev, REG_SW_ALU_VAL_D, &alu_table[3]); 675 676 /* clear forwarding port */ 677 alu_table[2] &= ~BIT(port); 678 679 /* if there is no port to forward, clear table */ 680 if ((alu_table[2] & ALU_V_PORT_MAP) == 0) { 681 alu_table[0] = 0; 682 alu_table[1] = 0; 683 alu_table[2] = 0; 684 alu_table[3] = 0; 685 } 686 } else { 687 alu_table[0] = 0; 688 alu_table[1] = 0; 689 alu_table[2] = 0; 690 alu_table[3] = 0; 691 } 692 693 ksz9477_write_table(dev, alu_table); 694 695 ksz_write32(dev, REG_SW_ALU_CTRL__4, ALU_WRITE | ALU_START); 696 697 /* wait to be finished */ 698 ret = ksz9477_wait_alu_ready(dev); 699 if (ret) 700 dev_dbg(dev->dev, "Failed to write ALU\n"); 701 702 exit: 703 mutex_unlock(&dev->alu_mutex); 704 705 return ret; 706 } 707 708 static void ksz9477_convert_alu(struct alu_struct *alu, u32 *alu_table) 709 { 710 alu->is_static = !!(alu_table[0] & ALU_V_STATIC_VALID); 711 alu->is_src_filter = !!(alu_table[0] & ALU_V_SRC_FILTER); 712 alu->is_dst_filter = !!(alu_table[0] & ALU_V_DST_FILTER); 713 alu->prio_age = (alu_table[0] >> ALU_V_PRIO_AGE_CNT_S) & 714 ALU_V_PRIO_AGE_CNT_M; 715 alu->mstp = alu_table[0] & ALU_V_MSTP_M; 716 717 alu->is_override = !!(alu_table[1] & ALU_V_OVERRIDE); 718 alu->is_use_fid = !!(alu_table[1] & ALU_V_USE_FID); 719 alu->port_forward = alu_table[1] & ALU_V_PORT_MAP; 720 721 alu->fid = (alu_table[2] >> ALU_V_FID_S) & ALU_V_FID_M; 722 723 alu->mac[0] = (alu_table[2] >> 8) & 0xFF; 724 alu->mac[1] = alu_table[2] & 0xFF; 725 alu->mac[2] = (alu_table[3] >> 24) & 0xFF; 726 alu->mac[3] = (alu_table[3] >> 16) & 0xFF; 727 alu->mac[4] = (alu_table[3] >> 8) & 0xFF; 728 alu->mac[5] = alu_table[3] & 0xFF; 729 } 730 731 static int ksz9477_port_fdb_dump(struct dsa_switch *ds, int port, 732 dsa_fdb_dump_cb_t *cb, void *data) 733 { 734 struct ksz_device *dev = ds->priv; 735 int ret = 0; 736 u32 ksz_data; 737 u32 alu_table[4]; 738 struct alu_struct alu; 739 int timeout; 740 741 mutex_lock(&dev->alu_mutex); 742 743 /* start ALU search */ 744 ksz_write32(dev, REG_SW_ALU_CTRL__4, ALU_START | ALU_SEARCH); 745 746 do { 747 timeout = 1000; 748 do { 749 ksz_read32(dev, REG_SW_ALU_CTRL__4, &ksz_data); 750 if ((ksz_data & ALU_VALID) || !(ksz_data & ALU_START)) 751 break; 752 usleep_range(1, 10); 753 } while (timeout-- > 0); 754 755 if (!timeout) { 756 dev_dbg(dev->dev, "Failed to search ALU\n"); 757 ret = -ETIMEDOUT; 758 goto exit; 759 } 760 761 /* read ALU table */ 762 ksz9477_read_table(dev, alu_table); 763 764 ksz9477_convert_alu(&alu, alu_table); 765 766 if (alu.port_forward & BIT(port)) { 767 ret = cb(alu.mac, alu.fid, alu.is_static, data); 768 if (ret) 769 goto exit; 770 } 771 } while (ksz_data & ALU_START); 772 773 exit: 774 775 /* stop ALU search */ 776 ksz_write32(dev, REG_SW_ALU_CTRL__4, 0); 777 778 mutex_unlock(&dev->alu_mutex); 779 780 return ret; 781 } 782 783 static void ksz9477_port_mdb_add(struct dsa_switch *ds, int port, 784 const struct switchdev_obj_port_mdb *mdb) 785 { 786 struct ksz_device *dev = ds->priv; 787 u32 static_table[4]; 788 u32 data; 789 int index; 790 u32 mac_hi, mac_lo; 791 792 mac_hi = ((mdb->addr[0] << 8) | mdb->addr[1]); 793 mac_lo = ((mdb->addr[2] << 24) | (mdb->addr[3] << 16)); 794 mac_lo |= ((mdb->addr[4] << 8) | mdb->addr[5]); 795 796 mutex_lock(&dev->alu_mutex); 797 798 for (index = 0; index < dev->num_statics; index++) { 799 /* find empty slot first */ 800 data = (index << ALU_STAT_INDEX_S) | 801 ALU_STAT_READ | ALU_STAT_START; 802 ksz_write32(dev, REG_SW_ALU_STAT_CTRL__4, data); 803 804 /* wait to be finished */ 805 if (ksz9477_wait_alu_sta_ready(dev)) { 806 dev_dbg(dev->dev, "Failed to read ALU STATIC\n"); 807 goto exit; 808 } 809 810 /* read ALU static table */ 811 ksz9477_read_table(dev, static_table); 812 813 if (static_table[0] & ALU_V_STATIC_VALID) { 814 /* check this has same vid & mac address */ 815 if (((static_table[2] >> ALU_V_FID_S) == mdb->vid) && 816 ((static_table[2] & ALU_V_MAC_ADDR_HI) == mac_hi) && 817 static_table[3] == mac_lo) { 818 /* found matching one */ 819 break; 820 } 821 } else { 822 /* found empty one */ 823 break; 824 } 825 } 826 827 /* no available entry */ 828 if (index == dev->num_statics) 829 goto exit; 830 831 /* add entry */ 832 static_table[0] = ALU_V_STATIC_VALID; 833 static_table[1] |= BIT(port); 834 if (mdb->vid) 835 static_table[1] |= ALU_V_USE_FID; 836 static_table[2] = (mdb->vid << ALU_V_FID_S); 837 static_table[2] |= mac_hi; 838 static_table[3] = mac_lo; 839 840 ksz9477_write_table(dev, static_table); 841 842 data = (index << ALU_STAT_INDEX_S) | ALU_STAT_START; 843 ksz_write32(dev, REG_SW_ALU_STAT_CTRL__4, data); 844 845 /* wait to be finished */ 846 if (ksz9477_wait_alu_sta_ready(dev)) 847 dev_dbg(dev->dev, "Failed to read ALU STATIC\n"); 848 849 exit: 850 mutex_unlock(&dev->alu_mutex); 851 } 852 853 static int ksz9477_port_mdb_del(struct dsa_switch *ds, int port, 854 const struct switchdev_obj_port_mdb *mdb) 855 { 856 struct ksz_device *dev = ds->priv; 857 u32 static_table[4]; 858 u32 data; 859 int index; 860 int ret = 0; 861 u32 mac_hi, mac_lo; 862 863 mac_hi = ((mdb->addr[0] << 8) | mdb->addr[1]); 864 mac_lo = ((mdb->addr[2] << 24) | (mdb->addr[3] << 16)); 865 mac_lo |= ((mdb->addr[4] << 8) | mdb->addr[5]); 866 867 mutex_lock(&dev->alu_mutex); 868 869 for (index = 0; index < dev->num_statics; index++) { 870 /* find empty slot first */ 871 data = (index << ALU_STAT_INDEX_S) | 872 ALU_STAT_READ | ALU_STAT_START; 873 ksz_write32(dev, REG_SW_ALU_STAT_CTRL__4, data); 874 875 /* wait to be finished */ 876 ret = ksz9477_wait_alu_sta_ready(dev); 877 if (ret) { 878 dev_dbg(dev->dev, "Failed to read ALU STATIC\n"); 879 goto exit; 880 } 881 882 /* read ALU static table */ 883 ksz9477_read_table(dev, static_table); 884 885 if (static_table[0] & ALU_V_STATIC_VALID) { 886 /* check this has same vid & mac address */ 887 888 if (((static_table[2] >> ALU_V_FID_S) == mdb->vid) && 889 ((static_table[2] & ALU_V_MAC_ADDR_HI) == mac_hi) && 890 static_table[3] == mac_lo) { 891 /* found matching one */ 892 break; 893 } 894 } 895 } 896 897 /* no available entry */ 898 if (index == dev->num_statics) 899 goto exit; 900 901 /* clear port */ 902 static_table[1] &= ~BIT(port); 903 904 if ((static_table[1] & ALU_V_PORT_MAP) == 0) { 905 /* delete entry */ 906 static_table[0] = 0; 907 static_table[1] = 0; 908 static_table[2] = 0; 909 static_table[3] = 0; 910 } 911 912 ksz9477_write_table(dev, static_table); 913 914 data = (index << ALU_STAT_INDEX_S) | ALU_STAT_START; 915 ksz_write32(dev, REG_SW_ALU_STAT_CTRL__4, data); 916 917 /* wait to be finished */ 918 ret = ksz9477_wait_alu_sta_ready(dev); 919 if (ret) 920 dev_dbg(dev->dev, "Failed to read ALU STATIC\n"); 921 922 exit: 923 mutex_unlock(&dev->alu_mutex); 924 925 return ret; 926 } 927 928 static int ksz9477_port_mirror_add(struct dsa_switch *ds, int port, 929 struct dsa_mall_mirror_tc_entry *mirror, 930 bool ingress) 931 { 932 struct ksz_device *dev = ds->priv; 933 934 if (ingress) 935 ksz_port_cfg(dev, port, P_MIRROR_CTRL, PORT_MIRROR_RX, true); 936 else 937 ksz_port_cfg(dev, port, P_MIRROR_CTRL, PORT_MIRROR_TX, true); 938 939 ksz_port_cfg(dev, port, P_MIRROR_CTRL, PORT_MIRROR_SNIFFER, false); 940 941 /* configure mirror port */ 942 ksz_port_cfg(dev, mirror->to_local_port, P_MIRROR_CTRL, 943 PORT_MIRROR_SNIFFER, true); 944 945 ksz_cfg(dev, S_MIRROR_CTRL, SW_MIRROR_RX_TX, false); 946 947 return 0; 948 } 949 950 static void ksz9477_port_mirror_del(struct dsa_switch *ds, int port, 951 struct dsa_mall_mirror_tc_entry *mirror) 952 { 953 struct ksz_device *dev = ds->priv; 954 u8 data; 955 956 if (mirror->ingress) 957 ksz_port_cfg(dev, port, P_MIRROR_CTRL, PORT_MIRROR_RX, false); 958 else 959 ksz_port_cfg(dev, port, P_MIRROR_CTRL, PORT_MIRROR_TX, false); 960 961 ksz_pread8(dev, port, P_MIRROR_CTRL, &data); 962 963 if (!(data & (PORT_MIRROR_RX | PORT_MIRROR_TX))) 964 ksz_port_cfg(dev, mirror->to_local_port, P_MIRROR_CTRL, 965 PORT_MIRROR_SNIFFER, false); 966 } 967 968 static bool ksz9477_get_gbit(struct ksz_device *dev, u8 data) 969 { 970 bool gbit; 971 972 if (dev->features & NEW_XMII) 973 gbit = !(data & PORT_MII_NOT_1GBIT); 974 else 975 gbit = !!(data & PORT_MII_1000MBIT_S1); 976 return gbit; 977 } 978 979 static void ksz9477_set_gbit(struct ksz_device *dev, bool gbit, u8 *data) 980 { 981 if (dev->features & NEW_XMII) { 982 if (gbit) 983 *data &= ~PORT_MII_NOT_1GBIT; 984 else 985 *data |= PORT_MII_NOT_1GBIT; 986 } else { 987 if (gbit) 988 *data |= PORT_MII_1000MBIT_S1; 989 else 990 *data &= ~PORT_MII_1000MBIT_S1; 991 } 992 } 993 994 static int ksz9477_get_xmii(struct ksz_device *dev, u8 data) 995 { 996 int mode; 997 998 if (dev->features & NEW_XMII) { 999 switch (data & PORT_MII_SEL_M) { 1000 case PORT_MII_SEL: 1001 mode = 0; 1002 break; 1003 case PORT_RMII_SEL: 1004 mode = 1; 1005 break; 1006 case PORT_GMII_SEL: 1007 mode = 2; 1008 break; 1009 default: 1010 mode = 3; 1011 } 1012 } else { 1013 switch (data & PORT_MII_SEL_M) { 1014 case PORT_MII_SEL_S1: 1015 mode = 0; 1016 break; 1017 case PORT_RMII_SEL_S1: 1018 mode = 1; 1019 break; 1020 case PORT_GMII_SEL_S1: 1021 mode = 2; 1022 break; 1023 default: 1024 mode = 3; 1025 } 1026 } 1027 return mode; 1028 } 1029 1030 static void ksz9477_set_xmii(struct ksz_device *dev, int mode, u8 *data) 1031 { 1032 u8 xmii; 1033 1034 if (dev->features & NEW_XMII) { 1035 switch (mode) { 1036 case 0: 1037 xmii = PORT_MII_SEL; 1038 break; 1039 case 1: 1040 xmii = PORT_RMII_SEL; 1041 break; 1042 case 2: 1043 xmii = PORT_GMII_SEL; 1044 break; 1045 default: 1046 xmii = PORT_RGMII_SEL; 1047 break; 1048 } 1049 } else { 1050 switch (mode) { 1051 case 0: 1052 xmii = PORT_MII_SEL_S1; 1053 break; 1054 case 1: 1055 xmii = PORT_RMII_SEL_S1; 1056 break; 1057 case 2: 1058 xmii = PORT_GMII_SEL_S1; 1059 break; 1060 default: 1061 xmii = PORT_RGMII_SEL_S1; 1062 break; 1063 } 1064 } 1065 *data &= ~PORT_MII_SEL_M; 1066 *data |= xmii; 1067 } 1068 1069 static phy_interface_t ksz9477_get_interface(struct ksz_device *dev, int port) 1070 { 1071 phy_interface_t interface; 1072 bool gbit; 1073 int mode; 1074 u8 data8; 1075 1076 if (port < dev->phy_port_cnt) 1077 return PHY_INTERFACE_MODE_NA; 1078 ksz_pread8(dev, port, REG_PORT_XMII_CTRL_1, &data8); 1079 gbit = ksz9477_get_gbit(dev, data8); 1080 mode = ksz9477_get_xmii(dev, data8); 1081 switch (mode) { 1082 case 2: 1083 interface = PHY_INTERFACE_MODE_GMII; 1084 if (gbit) 1085 break; 1086 fallthrough; 1087 case 0: 1088 interface = PHY_INTERFACE_MODE_MII; 1089 break; 1090 case 1: 1091 interface = PHY_INTERFACE_MODE_RMII; 1092 break; 1093 default: 1094 interface = PHY_INTERFACE_MODE_RGMII; 1095 if (data8 & PORT_RGMII_ID_EG_ENABLE) 1096 interface = PHY_INTERFACE_MODE_RGMII_TXID; 1097 if (data8 & PORT_RGMII_ID_IG_ENABLE) { 1098 interface = PHY_INTERFACE_MODE_RGMII_RXID; 1099 if (data8 & PORT_RGMII_ID_EG_ENABLE) 1100 interface = PHY_INTERFACE_MODE_RGMII_ID; 1101 } 1102 break; 1103 } 1104 return interface; 1105 } 1106 1107 static void ksz9477_port_mmd_write(struct ksz_device *dev, int port, 1108 u8 dev_addr, u16 reg_addr, u16 val) 1109 { 1110 ksz_pwrite16(dev, port, REG_PORT_PHY_MMD_SETUP, 1111 MMD_SETUP(PORT_MMD_OP_INDEX, dev_addr)); 1112 ksz_pwrite16(dev, port, REG_PORT_PHY_MMD_INDEX_DATA, reg_addr); 1113 ksz_pwrite16(dev, port, REG_PORT_PHY_MMD_SETUP, 1114 MMD_SETUP(PORT_MMD_OP_DATA_NO_INCR, dev_addr)); 1115 ksz_pwrite16(dev, port, REG_PORT_PHY_MMD_INDEX_DATA, val); 1116 } 1117 1118 static void ksz9477_phy_errata_setup(struct ksz_device *dev, int port) 1119 { 1120 /* Apply PHY settings to address errata listed in 1121 * KSZ9477, KSZ9897, KSZ9896, KSZ9567, KSZ8565 1122 * Silicon Errata and Data Sheet Clarification documents: 1123 * 1124 * Register settings are needed to improve PHY receive performance 1125 */ 1126 ksz9477_port_mmd_write(dev, port, 0x01, 0x6f, 0xdd0b); 1127 ksz9477_port_mmd_write(dev, port, 0x01, 0x8f, 0x6032); 1128 ksz9477_port_mmd_write(dev, port, 0x01, 0x9d, 0x248c); 1129 ksz9477_port_mmd_write(dev, port, 0x01, 0x75, 0x0060); 1130 ksz9477_port_mmd_write(dev, port, 0x01, 0xd3, 0x7777); 1131 ksz9477_port_mmd_write(dev, port, 0x1c, 0x06, 0x3008); 1132 ksz9477_port_mmd_write(dev, port, 0x1c, 0x08, 0x2001); 1133 1134 /* Transmit waveform amplitude can be improved 1135 * (1000BASE-T, 100BASE-TX, 10BASE-Te) 1136 */ 1137 ksz9477_port_mmd_write(dev, port, 0x1c, 0x04, 0x00d0); 1138 1139 /* Energy Efficient Ethernet (EEE) feature select must 1140 * be manually disabled (except on KSZ8565 which is 100Mbit) 1141 */ 1142 if (dev->features & GBIT_SUPPORT) 1143 ksz9477_port_mmd_write(dev, port, 0x07, 0x3c, 0x0000); 1144 1145 /* Register settings are required to meet data sheet 1146 * supply current specifications 1147 */ 1148 ksz9477_port_mmd_write(dev, port, 0x1c, 0x13, 0x6eff); 1149 ksz9477_port_mmd_write(dev, port, 0x1c, 0x14, 0xe6ff); 1150 ksz9477_port_mmd_write(dev, port, 0x1c, 0x15, 0x6eff); 1151 ksz9477_port_mmd_write(dev, port, 0x1c, 0x16, 0xe6ff); 1152 ksz9477_port_mmd_write(dev, port, 0x1c, 0x17, 0x00ff); 1153 ksz9477_port_mmd_write(dev, port, 0x1c, 0x18, 0x43ff); 1154 ksz9477_port_mmd_write(dev, port, 0x1c, 0x19, 0xc3ff); 1155 ksz9477_port_mmd_write(dev, port, 0x1c, 0x1a, 0x6fff); 1156 ksz9477_port_mmd_write(dev, port, 0x1c, 0x1b, 0x07ff); 1157 ksz9477_port_mmd_write(dev, port, 0x1c, 0x1c, 0x0fff); 1158 ksz9477_port_mmd_write(dev, port, 0x1c, 0x1d, 0xe7ff); 1159 ksz9477_port_mmd_write(dev, port, 0x1c, 0x1e, 0xefff); 1160 ksz9477_port_mmd_write(dev, port, 0x1c, 0x20, 0xeeee); 1161 } 1162 1163 static void ksz9477_port_setup(struct ksz_device *dev, int port, bool cpu_port) 1164 { 1165 u8 data8; 1166 u8 member; 1167 u16 data16; 1168 struct ksz_port *p = &dev->ports[port]; 1169 1170 /* enable tag tail for host port */ 1171 if (cpu_port) 1172 ksz_port_cfg(dev, port, REG_PORT_CTRL_0, PORT_TAIL_TAG_ENABLE, 1173 true); 1174 1175 ksz_port_cfg(dev, port, REG_PORT_CTRL_0, PORT_MAC_LOOPBACK, false); 1176 1177 /* set back pressure */ 1178 ksz_port_cfg(dev, port, REG_PORT_MAC_CTRL_1, PORT_BACK_PRESSURE, true); 1179 1180 /* enable broadcast storm limit */ 1181 ksz_port_cfg(dev, port, P_BCAST_STORM_CTRL, PORT_BROADCAST_STORM, true); 1182 1183 /* disable DiffServ priority */ 1184 ksz_port_cfg(dev, port, P_PRIO_CTRL, PORT_DIFFSERV_PRIO_ENABLE, false); 1185 1186 /* replace priority */ 1187 ksz_port_cfg(dev, port, REG_PORT_MRI_MAC_CTRL, PORT_USER_PRIO_CEILING, 1188 false); 1189 ksz9477_port_cfg32(dev, port, REG_PORT_MTI_QUEUE_CTRL_0__4, 1190 MTI_PVID_REPLACE, false); 1191 1192 /* enable 802.1p priority */ 1193 ksz_port_cfg(dev, port, P_PRIO_CTRL, PORT_802_1P_PRIO_ENABLE, true); 1194 1195 if (port < dev->phy_port_cnt) { 1196 /* do not force flow control */ 1197 ksz_port_cfg(dev, port, REG_PORT_CTRL_0, 1198 PORT_FORCE_TX_FLOW_CTRL | PORT_FORCE_RX_FLOW_CTRL, 1199 false); 1200 1201 if (dev->phy_errata_9477) 1202 ksz9477_phy_errata_setup(dev, port); 1203 } else { 1204 /* force flow control */ 1205 ksz_port_cfg(dev, port, REG_PORT_CTRL_0, 1206 PORT_FORCE_TX_FLOW_CTRL | PORT_FORCE_RX_FLOW_CTRL, 1207 true); 1208 1209 /* configure MAC to 1G & RGMII mode */ 1210 ksz_pread8(dev, port, REG_PORT_XMII_CTRL_1, &data8); 1211 switch (dev->interface) { 1212 case PHY_INTERFACE_MODE_MII: 1213 ksz9477_set_xmii(dev, 0, &data8); 1214 ksz9477_set_gbit(dev, false, &data8); 1215 p->phydev.speed = SPEED_100; 1216 break; 1217 case PHY_INTERFACE_MODE_RMII: 1218 ksz9477_set_xmii(dev, 1, &data8); 1219 ksz9477_set_gbit(dev, false, &data8); 1220 p->phydev.speed = SPEED_100; 1221 break; 1222 case PHY_INTERFACE_MODE_GMII: 1223 ksz9477_set_xmii(dev, 2, &data8); 1224 ksz9477_set_gbit(dev, true, &data8); 1225 p->phydev.speed = SPEED_1000; 1226 break; 1227 default: 1228 ksz9477_set_xmii(dev, 3, &data8); 1229 ksz9477_set_gbit(dev, true, &data8); 1230 data8 &= ~PORT_RGMII_ID_IG_ENABLE; 1231 data8 &= ~PORT_RGMII_ID_EG_ENABLE; 1232 if (dev->interface == PHY_INTERFACE_MODE_RGMII_ID || 1233 dev->interface == PHY_INTERFACE_MODE_RGMII_RXID) 1234 data8 |= PORT_RGMII_ID_IG_ENABLE; 1235 if (dev->interface == PHY_INTERFACE_MODE_RGMII_ID || 1236 dev->interface == PHY_INTERFACE_MODE_RGMII_TXID) 1237 data8 |= PORT_RGMII_ID_EG_ENABLE; 1238 p->phydev.speed = SPEED_1000; 1239 break; 1240 } 1241 ksz_pwrite8(dev, port, REG_PORT_XMII_CTRL_1, data8); 1242 p->phydev.duplex = 1; 1243 } 1244 mutex_lock(&dev->dev_mutex); 1245 if (cpu_port) 1246 member = dev->port_mask; 1247 else 1248 member = dev->host_mask | p->vid_member; 1249 mutex_unlock(&dev->dev_mutex); 1250 ksz9477_cfg_port_member(dev, port, member); 1251 1252 /* clear pending interrupts */ 1253 if (port < dev->phy_port_cnt) 1254 ksz_pread16(dev, port, REG_PORT_PHY_INT_ENABLE, &data16); 1255 } 1256 1257 static void ksz9477_config_cpu_port(struct dsa_switch *ds) 1258 { 1259 struct ksz_device *dev = ds->priv; 1260 struct ksz_port *p; 1261 int i; 1262 1263 ds->num_ports = dev->port_cnt; 1264 1265 for (i = 0; i < dev->port_cnt; i++) { 1266 if (dsa_is_cpu_port(ds, i) && (dev->cpu_ports & (1 << i))) { 1267 phy_interface_t interface; 1268 1269 dev->cpu_port = i; 1270 dev->host_mask = (1 << dev->cpu_port); 1271 dev->port_mask |= dev->host_mask; 1272 1273 /* Read from XMII register to determine host port 1274 * interface. If set specifically in device tree 1275 * note the difference to help debugging. 1276 */ 1277 interface = ksz9477_get_interface(dev, i); 1278 if (!dev->interface) 1279 dev->interface = interface; 1280 if (interface && interface != dev->interface) 1281 dev_info(dev->dev, 1282 "use %s instead of %s\n", 1283 phy_modes(dev->interface), 1284 phy_modes(interface)); 1285 1286 /* enable cpu port */ 1287 ksz9477_port_setup(dev, i, true); 1288 p = &dev->ports[dev->cpu_port]; 1289 p->vid_member = dev->port_mask; 1290 p->on = 1; 1291 } 1292 } 1293 1294 dev->member = dev->host_mask; 1295 1296 for (i = 0; i < dev->mib_port_cnt; i++) { 1297 if (i == dev->cpu_port) 1298 continue; 1299 p = &dev->ports[i]; 1300 1301 /* Initialize to non-zero so that ksz_cfg_port_member() will 1302 * be called. 1303 */ 1304 p->vid_member = (1 << i); 1305 p->member = dev->port_mask; 1306 ksz9477_port_stp_state_set(ds, i, BR_STATE_DISABLED); 1307 p->on = 1; 1308 if (i < dev->phy_port_cnt) 1309 p->phy = 1; 1310 if (dev->chip_id == 0x00947700 && i == 6) { 1311 p->sgmii = 1; 1312 1313 /* SGMII PHY detection code is not implemented yet. */ 1314 p->phy = 0; 1315 } 1316 } 1317 } 1318 1319 static int ksz9477_setup(struct dsa_switch *ds) 1320 { 1321 struct ksz_device *dev = ds->priv; 1322 int ret = 0; 1323 1324 dev->vlan_cache = devm_kcalloc(dev->dev, sizeof(struct vlan_table), 1325 dev->num_vlans, GFP_KERNEL); 1326 if (!dev->vlan_cache) 1327 return -ENOMEM; 1328 1329 ret = ksz9477_reset_switch(dev); 1330 if (ret) { 1331 dev_err(ds->dev, "failed to reset switch\n"); 1332 return ret; 1333 } 1334 1335 /* Required for port partitioning. */ 1336 ksz9477_cfg32(dev, REG_SW_QM_CTRL__4, UNICAST_VLAN_BOUNDARY, 1337 true); 1338 1339 /* Do not work correctly with tail tagging. */ 1340 ksz_cfg(dev, REG_SW_MAC_CTRL_0, SW_CHECK_LENGTH, false); 1341 1342 /* accept packet up to 2000bytes */ 1343 ksz_cfg(dev, REG_SW_MAC_CTRL_1, SW_LEGAL_PACKET_DISABLE, true); 1344 1345 ksz9477_config_cpu_port(ds); 1346 1347 ksz_cfg(dev, REG_SW_MAC_CTRL_1, MULTICAST_STORM_DISABLE, true); 1348 1349 /* queue based egress rate limit */ 1350 ksz_cfg(dev, REG_SW_MAC_CTRL_5, SW_OUT_RATE_LIMIT_QUEUE_BASED, true); 1351 1352 /* enable global MIB counter freeze function */ 1353 ksz_cfg(dev, REG_SW_MAC_CTRL_6, SW_MIB_COUNTER_FREEZE, true); 1354 1355 /* start switch */ 1356 ksz_cfg(dev, REG_SW_OPERATION, SW_START, true); 1357 1358 ksz_init_mib_timer(dev); 1359 1360 return 0; 1361 } 1362 1363 static const struct dsa_switch_ops ksz9477_switch_ops = { 1364 .get_tag_protocol = ksz9477_get_tag_protocol, 1365 .setup = ksz9477_setup, 1366 .phy_read = ksz9477_phy_read16, 1367 .phy_write = ksz9477_phy_write16, 1368 .phylink_mac_link_down = ksz_mac_link_down, 1369 .port_enable = ksz_enable_port, 1370 .get_strings = ksz9477_get_strings, 1371 .get_ethtool_stats = ksz_get_ethtool_stats, 1372 .get_sset_count = ksz_sset_count, 1373 .port_bridge_join = ksz_port_bridge_join, 1374 .port_bridge_leave = ksz_port_bridge_leave, 1375 .port_stp_state_set = ksz9477_port_stp_state_set, 1376 .port_fast_age = ksz_port_fast_age, 1377 .port_vlan_filtering = ksz9477_port_vlan_filtering, 1378 .port_vlan_prepare = ksz_port_vlan_prepare, 1379 .port_vlan_add = ksz9477_port_vlan_add, 1380 .port_vlan_del = ksz9477_port_vlan_del, 1381 .port_fdb_dump = ksz9477_port_fdb_dump, 1382 .port_fdb_add = ksz9477_port_fdb_add, 1383 .port_fdb_del = ksz9477_port_fdb_del, 1384 .port_mdb_prepare = ksz_port_mdb_prepare, 1385 .port_mdb_add = ksz9477_port_mdb_add, 1386 .port_mdb_del = ksz9477_port_mdb_del, 1387 .port_mirror_add = ksz9477_port_mirror_add, 1388 .port_mirror_del = ksz9477_port_mirror_del, 1389 }; 1390 1391 static u32 ksz9477_get_port_addr(int port, int offset) 1392 { 1393 return PORT_CTRL_ADDR(port, offset); 1394 } 1395 1396 static int ksz9477_switch_detect(struct ksz_device *dev) 1397 { 1398 u8 data8; 1399 u8 id_hi; 1400 u8 id_lo; 1401 u32 id32; 1402 int ret; 1403 1404 /* turn off SPI DO Edge select */ 1405 ret = ksz_read8(dev, REG_SW_GLOBAL_SERIAL_CTRL_0, &data8); 1406 if (ret) 1407 return ret; 1408 1409 data8 &= ~SPI_AUTO_EDGE_DETECTION; 1410 ret = ksz_write8(dev, REG_SW_GLOBAL_SERIAL_CTRL_0, data8); 1411 if (ret) 1412 return ret; 1413 1414 /* read chip id */ 1415 ret = ksz_read32(dev, REG_CHIP_ID0__1, &id32); 1416 if (ret) 1417 return ret; 1418 ret = ksz_read8(dev, REG_GLOBAL_OPTIONS, &data8); 1419 if (ret) 1420 return ret; 1421 1422 /* Number of ports can be reduced depending on chip. */ 1423 dev->mib_port_cnt = TOTAL_PORT_NUM; 1424 dev->phy_port_cnt = 5; 1425 1426 /* Default capability is gigabit capable. */ 1427 dev->features = GBIT_SUPPORT; 1428 1429 id_hi = (u8)(id32 >> 16); 1430 id_lo = (u8)(id32 >> 8); 1431 if ((id_lo & 0xf) == 3) { 1432 /* Chip is from KSZ9893 design. */ 1433 dev->features |= IS_9893; 1434 1435 /* Chip does not support gigabit. */ 1436 if (data8 & SW_QW_ABLE) 1437 dev->features &= ~GBIT_SUPPORT; 1438 dev->mib_port_cnt = 3; 1439 dev->phy_port_cnt = 2; 1440 } else { 1441 /* Chip uses new XMII register definitions. */ 1442 dev->features |= NEW_XMII; 1443 1444 /* Chip does not support gigabit. */ 1445 if (!(data8 & SW_GIGABIT_ABLE)) 1446 dev->features &= ~GBIT_SUPPORT; 1447 } 1448 1449 /* Change chip id to known ones so it can be matched against them. */ 1450 id32 = (id_hi << 16) | (id_lo << 8); 1451 1452 dev->chip_id = id32; 1453 1454 return 0; 1455 } 1456 1457 struct ksz_chip_data { 1458 u32 chip_id; 1459 const char *dev_name; 1460 int num_vlans; 1461 int num_alus; 1462 int num_statics; 1463 int cpu_ports; 1464 int port_cnt; 1465 bool phy_errata_9477; 1466 }; 1467 1468 static const struct ksz_chip_data ksz9477_switch_chips[] = { 1469 { 1470 .chip_id = 0x00947700, 1471 .dev_name = "KSZ9477", 1472 .num_vlans = 4096, 1473 .num_alus = 4096, 1474 .num_statics = 16, 1475 .cpu_ports = 0x7F, /* can be configured as cpu port */ 1476 .port_cnt = 7, /* total physical port count */ 1477 .phy_errata_9477 = true, 1478 }, 1479 { 1480 .chip_id = 0x00989700, 1481 .dev_name = "KSZ9897", 1482 .num_vlans = 4096, 1483 .num_alus = 4096, 1484 .num_statics = 16, 1485 .cpu_ports = 0x7F, /* can be configured as cpu port */ 1486 .port_cnt = 7, /* total physical port count */ 1487 .phy_errata_9477 = true, 1488 }, 1489 { 1490 .chip_id = 0x00989300, 1491 .dev_name = "KSZ9893", 1492 .num_vlans = 4096, 1493 .num_alus = 4096, 1494 .num_statics = 16, 1495 .cpu_ports = 0x07, /* can be configured as cpu port */ 1496 .port_cnt = 3, /* total port count */ 1497 }, 1498 { 1499 .chip_id = 0x00956700, 1500 .dev_name = "KSZ9567", 1501 .num_vlans = 4096, 1502 .num_alus = 4096, 1503 .num_statics = 16, 1504 .cpu_ports = 0x7F, /* can be configured as cpu port */ 1505 .port_cnt = 7, /* total physical port count */ 1506 }, 1507 }; 1508 1509 static int ksz9477_switch_init(struct ksz_device *dev) 1510 { 1511 int i; 1512 1513 dev->ds->ops = &ksz9477_switch_ops; 1514 1515 for (i = 0; i < ARRAY_SIZE(ksz9477_switch_chips); i++) { 1516 const struct ksz_chip_data *chip = &ksz9477_switch_chips[i]; 1517 1518 if (dev->chip_id == chip->chip_id) { 1519 dev->name = chip->dev_name; 1520 dev->num_vlans = chip->num_vlans; 1521 dev->num_alus = chip->num_alus; 1522 dev->num_statics = chip->num_statics; 1523 dev->port_cnt = chip->port_cnt; 1524 dev->cpu_ports = chip->cpu_ports; 1525 dev->phy_errata_9477 = chip->phy_errata_9477; 1526 1527 break; 1528 } 1529 } 1530 1531 /* no switch found */ 1532 if (!dev->port_cnt) 1533 return -ENODEV; 1534 1535 dev->port_mask = (1 << dev->port_cnt) - 1; 1536 1537 dev->reg_mib_cnt = SWITCH_COUNTER_NUM; 1538 dev->mib_cnt = TOTAL_SWITCH_COUNTER_NUM; 1539 1540 i = dev->mib_port_cnt; 1541 dev->ports = devm_kzalloc(dev->dev, sizeof(struct ksz_port) * i, 1542 GFP_KERNEL); 1543 if (!dev->ports) 1544 return -ENOMEM; 1545 for (i = 0; i < dev->mib_port_cnt; i++) { 1546 mutex_init(&dev->ports[i].mib.cnt_mutex); 1547 dev->ports[i].mib.counters = 1548 devm_kzalloc(dev->dev, 1549 sizeof(u64) * 1550 (TOTAL_SWITCH_COUNTER_NUM + 1), 1551 GFP_KERNEL); 1552 if (!dev->ports[i].mib.counters) 1553 return -ENOMEM; 1554 } 1555 1556 /* set the real number of ports */ 1557 dev->ds->num_ports = dev->port_cnt; 1558 1559 return 0; 1560 } 1561 1562 static void ksz9477_switch_exit(struct ksz_device *dev) 1563 { 1564 ksz9477_reset_switch(dev); 1565 } 1566 1567 static const struct ksz_dev_ops ksz9477_dev_ops = { 1568 .get_port_addr = ksz9477_get_port_addr, 1569 .cfg_port_member = ksz9477_cfg_port_member, 1570 .flush_dyn_mac_table = ksz9477_flush_dyn_mac_table, 1571 .port_setup = ksz9477_port_setup, 1572 .r_mib_cnt = ksz9477_r_mib_cnt, 1573 .r_mib_pkt = ksz9477_r_mib_pkt, 1574 .freeze_mib = ksz9477_freeze_mib, 1575 .port_init_cnt = ksz9477_port_init_cnt, 1576 .shutdown = ksz9477_reset_switch, 1577 .detect = ksz9477_switch_detect, 1578 .init = ksz9477_switch_init, 1579 .exit = ksz9477_switch_exit, 1580 }; 1581 1582 int ksz9477_switch_register(struct ksz_device *dev) 1583 { 1584 int ret, i; 1585 struct phy_device *phydev; 1586 1587 ret = ksz_switch_register(dev, &ksz9477_dev_ops); 1588 if (ret) 1589 return ret; 1590 1591 for (i = 0; i < dev->phy_port_cnt; ++i) { 1592 if (!dsa_is_user_port(dev->ds, i)) 1593 continue; 1594 1595 phydev = dsa_to_port(dev->ds, i)->slave->phydev; 1596 1597 /* The MAC actually cannot run in 1000 half-duplex mode. */ 1598 phy_remove_link_mode(phydev, 1599 ETHTOOL_LINK_MODE_1000baseT_Half_BIT); 1600 1601 /* PHY does not support gigabit. */ 1602 if (!(dev->features & GBIT_SUPPORT)) 1603 phy_remove_link_mode(phydev, 1604 ETHTOOL_LINK_MODE_1000baseT_Full_BIT); 1605 } 1606 return ret; 1607 } 1608 EXPORT_SYMBOL(ksz9477_switch_register); 1609 1610 MODULE_AUTHOR("Woojung Huh <Woojung.Huh@microchip.com>"); 1611 MODULE_DESCRIPTION("Microchip KSZ9477 Series Switch DSA Driver"); 1612 MODULE_LICENSE("GPL"); 1613