1 // SPDX-License-Identifier: GPL-2.0 2 /* 3 * Microchip KSZ8795 switch driver 4 * 5 * Copyright (C) 2017 Microchip Technology Inc. 6 * Tristram Ha <Tristram.Ha@microchip.com> 7 */ 8 9 #include <linux/delay.h> 10 #include <linux/export.h> 11 #include <linux/gpio.h> 12 #include <linux/kernel.h> 13 #include <linux/module.h> 14 #include <linux/platform_data/microchip-ksz.h> 15 #include <linux/phy.h> 16 #include <linux/etherdevice.h> 17 #include <linux/if_bridge.h> 18 #include <net/dsa.h> 19 #include <net/switchdev.h> 20 21 #include "ksz_common.h" 22 #include "ksz8795_reg.h" 23 24 static const struct { 25 char string[ETH_GSTRING_LEN]; 26 } mib_names[TOTAL_SWITCH_COUNTER_NUM] = { 27 { "rx_hi" }, 28 { "rx_undersize" }, 29 { "rx_fragments" }, 30 { "rx_oversize" }, 31 { "rx_jabbers" }, 32 { "rx_symbol_err" }, 33 { "rx_crc_err" }, 34 { "rx_align_err" }, 35 { "rx_mac_ctrl" }, 36 { "rx_pause" }, 37 { "rx_bcast" }, 38 { "rx_mcast" }, 39 { "rx_ucast" }, 40 { "rx_64_or_less" }, 41 { "rx_65_127" }, 42 { "rx_128_255" }, 43 { "rx_256_511" }, 44 { "rx_512_1023" }, 45 { "rx_1024_1522" }, 46 { "rx_1523_2000" }, 47 { "rx_2001" }, 48 { "tx_hi" }, 49 { "tx_late_col" }, 50 { "tx_pause" }, 51 { "tx_bcast" }, 52 { "tx_mcast" }, 53 { "tx_ucast" }, 54 { "tx_deferred" }, 55 { "tx_total_col" }, 56 { "tx_exc_col" }, 57 { "tx_single_col" }, 58 { "tx_mult_col" }, 59 { "rx_total" }, 60 { "tx_total" }, 61 { "rx_discards" }, 62 { "tx_discards" }, 63 }; 64 65 static void ksz_cfg(struct ksz_device *dev, u32 addr, u8 bits, bool set) 66 { 67 regmap_update_bits(dev->regmap[0], addr, bits, set ? bits : 0); 68 } 69 70 static void ksz_port_cfg(struct ksz_device *dev, int port, int offset, u8 bits, 71 bool set) 72 { 73 regmap_update_bits(dev->regmap[0], PORT_CTRL_ADDR(port, offset), 74 bits, set ? bits : 0); 75 } 76 77 static int ksz8795_reset_switch(struct ksz_device *dev) 78 { 79 /* reset switch */ 80 ksz_write8(dev, REG_POWER_MANAGEMENT_1, 81 SW_SOFTWARE_POWER_DOWN << SW_POWER_MANAGEMENT_MODE_S); 82 ksz_write8(dev, REG_POWER_MANAGEMENT_1, 0); 83 84 return 0; 85 } 86 87 static void ksz8795_set_prio_queue(struct ksz_device *dev, int port, int queue) 88 { 89 u8 hi, lo; 90 91 /* Number of queues can only be 1, 2, or 4. */ 92 switch (queue) { 93 case 4: 94 case 3: 95 queue = PORT_QUEUE_SPLIT_4; 96 break; 97 case 2: 98 queue = PORT_QUEUE_SPLIT_2; 99 break; 100 default: 101 queue = PORT_QUEUE_SPLIT_1; 102 } 103 ksz_pread8(dev, port, REG_PORT_CTRL_0, &lo); 104 ksz_pread8(dev, port, P_DROP_TAG_CTRL, &hi); 105 lo &= ~PORT_QUEUE_SPLIT_L; 106 if (queue & PORT_QUEUE_SPLIT_2) 107 lo |= PORT_QUEUE_SPLIT_L; 108 hi &= ~PORT_QUEUE_SPLIT_H; 109 if (queue & PORT_QUEUE_SPLIT_4) 110 hi |= PORT_QUEUE_SPLIT_H; 111 ksz_pwrite8(dev, port, REG_PORT_CTRL_0, lo); 112 ksz_pwrite8(dev, port, P_DROP_TAG_CTRL, hi); 113 114 /* Default is port based for egress rate limit. */ 115 if (queue != PORT_QUEUE_SPLIT_1) 116 ksz_cfg(dev, REG_SW_CTRL_19, SW_OUT_RATE_LIMIT_QUEUE_BASED, 117 true); 118 } 119 120 static void ksz8795_r_mib_cnt(struct ksz_device *dev, int port, u16 addr, 121 u64 *cnt) 122 { 123 u16 ctrl_addr; 124 u32 data; 125 u8 check; 126 int loop; 127 128 ctrl_addr = addr + SWITCH_COUNTER_NUM * port; 129 ctrl_addr |= IND_ACC_TABLE(TABLE_MIB | TABLE_READ); 130 131 mutex_lock(&dev->alu_mutex); 132 ksz_write16(dev, REG_IND_CTRL_0, ctrl_addr); 133 134 /* It is almost guaranteed to always read the valid bit because of 135 * slow SPI speed. 136 */ 137 for (loop = 2; loop > 0; loop--) { 138 ksz_read8(dev, REG_IND_MIB_CHECK, &check); 139 140 if (check & MIB_COUNTER_VALID) { 141 ksz_read32(dev, REG_IND_DATA_LO, &data); 142 if (check & MIB_COUNTER_OVERFLOW) 143 *cnt += MIB_COUNTER_VALUE + 1; 144 *cnt += data & MIB_COUNTER_VALUE; 145 break; 146 } 147 } 148 mutex_unlock(&dev->alu_mutex); 149 } 150 151 static void ksz8795_r_mib_pkt(struct ksz_device *dev, int port, u16 addr, 152 u64 *dropped, u64 *cnt) 153 { 154 u16 ctrl_addr; 155 u32 data; 156 u8 check; 157 int loop; 158 159 addr -= SWITCH_COUNTER_NUM; 160 ctrl_addr = (KS_MIB_TOTAL_RX_1 - KS_MIB_TOTAL_RX_0) * port; 161 ctrl_addr += addr + KS_MIB_TOTAL_RX_0; 162 ctrl_addr |= IND_ACC_TABLE(TABLE_MIB | TABLE_READ); 163 164 mutex_lock(&dev->alu_mutex); 165 ksz_write16(dev, REG_IND_CTRL_0, ctrl_addr); 166 167 /* It is almost guaranteed to always read the valid bit because of 168 * slow SPI speed. 169 */ 170 for (loop = 2; loop > 0; loop--) { 171 ksz_read8(dev, REG_IND_MIB_CHECK, &check); 172 173 if (check & MIB_COUNTER_VALID) { 174 ksz_read32(dev, REG_IND_DATA_LO, &data); 175 if (addr < 2) { 176 u64 total; 177 178 total = check & MIB_TOTAL_BYTES_H; 179 total <<= 32; 180 *cnt += total; 181 *cnt += data; 182 if (check & MIB_COUNTER_OVERFLOW) { 183 total = MIB_TOTAL_BYTES_H + 1; 184 total <<= 32; 185 *cnt += total; 186 } 187 } else { 188 if (check & MIB_COUNTER_OVERFLOW) 189 *cnt += MIB_PACKET_DROPPED + 1; 190 *cnt += data & MIB_PACKET_DROPPED; 191 } 192 break; 193 } 194 } 195 mutex_unlock(&dev->alu_mutex); 196 } 197 198 static void ksz8795_freeze_mib(struct ksz_device *dev, int port, bool freeze) 199 { 200 /* enable the port for flush/freeze function */ 201 if (freeze) 202 ksz_cfg(dev, REG_SW_CTRL_6, BIT(port), true); 203 ksz_cfg(dev, REG_SW_CTRL_6, SW_MIB_COUNTER_FREEZE, freeze); 204 205 /* disable the port after freeze is done */ 206 if (!freeze) 207 ksz_cfg(dev, REG_SW_CTRL_6, BIT(port), false); 208 } 209 210 static void ksz8795_port_init_cnt(struct ksz_device *dev, int port) 211 { 212 struct ksz_port_mib *mib = &dev->ports[port].mib; 213 214 /* flush all enabled port MIB counters */ 215 ksz_cfg(dev, REG_SW_CTRL_6, BIT(port), true); 216 ksz_cfg(dev, REG_SW_CTRL_6, SW_MIB_COUNTER_FLUSH, true); 217 ksz_cfg(dev, REG_SW_CTRL_6, BIT(port), false); 218 219 mib->cnt_ptr = 0; 220 221 /* Some ports may not have MIB counters before SWITCH_COUNTER_NUM. */ 222 while (mib->cnt_ptr < dev->reg_mib_cnt) { 223 dev->dev_ops->r_mib_cnt(dev, port, mib->cnt_ptr, 224 &mib->counters[mib->cnt_ptr]); 225 ++mib->cnt_ptr; 226 } 227 228 /* Some ports may not have MIB counters after SWITCH_COUNTER_NUM. */ 229 while (mib->cnt_ptr < dev->mib_cnt) { 230 dev->dev_ops->r_mib_pkt(dev, port, mib->cnt_ptr, 231 NULL, &mib->counters[mib->cnt_ptr]); 232 ++mib->cnt_ptr; 233 } 234 mib->cnt_ptr = 0; 235 memset(mib->counters, 0, dev->mib_cnt * sizeof(u64)); 236 } 237 238 static void ksz8795_r_table(struct ksz_device *dev, int table, u16 addr, 239 u64 *data) 240 { 241 u16 ctrl_addr; 242 243 ctrl_addr = IND_ACC_TABLE(table | TABLE_READ) | addr; 244 245 mutex_lock(&dev->alu_mutex); 246 ksz_write16(dev, REG_IND_CTRL_0, ctrl_addr); 247 ksz_read64(dev, REG_IND_DATA_HI, data); 248 mutex_unlock(&dev->alu_mutex); 249 } 250 251 static void ksz8795_w_table(struct ksz_device *dev, int table, u16 addr, 252 u64 data) 253 { 254 u16 ctrl_addr; 255 256 ctrl_addr = IND_ACC_TABLE(table) | addr; 257 258 mutex_lock(&dev->alu_mutex); 259 ksz_write64(dev, REG_IND_DATA_HI, data); 260 ksz_write16(dev, REG_IND_CTRL_0, ctrl_addr); 261 mutex_unlock(&dev->alu_mutex); 262 } 263 264 static int ksz8795_valid_dyn_entry(struct ksz_device *dev, u8 *data) 265 { 266 int timeout = 100; 267 268 do { 269 ksz_read8(dev, REG_IND_DATA_CHECK, data); 270 timeout--; 271 } while ((*data & DYNAMIC_MAC_TABLE_NOT_READY) && timeout); 272 273 /* Entry is not ready for accessing. */ 274 if (*data & DYNAMIC_MAC_TABLE_NOT_READY) { 275 return -EAGAIN; 276 /* Entry is ready for accessing. */ 277 } else { 278 ksz_read8(dev, REG_IND_DATA_8, data); 279 280 /* There is no valid entry in the table. */ 281 if (*data & DYNAMIC_MAC_TABLE_MAC_EMPTY) 282 return -ENXIO; 283 } 284 return 0; 285 } 286 287 static int ksz8795_r_dyn_mac_table(struct ksz_device *dev, u16 addr, 288 u8 *mac_addr, u8 *fid, u8 *src_port, 289 u8 *timestamp, u16 *entries) 290 { 291 u32 data_hi, data_lo; 292 u16 ctrl_addr; 293 u8 data; 294 int rc; 295 296 ctrl_addr = IND_ACC_TABLE(TABLE_DYNAMIC_MAC | TABLE_READ) | addr; 297 298 mutex_lock(&dev->alu_mutex); 299 ksz_write16(dev, REG_IND_CTRL_0, ctrl_addr); 300 301 rc = ksz8795_valid_dyn_entry(dev, &data); 302 if (rc == -EAGAIN) { 303 if (addr == 0) 304 *entries = 0; 305 } else if (rc == -ENXIO) { 306 *entries = 0; 307 /* At least one valid entry in the table. */ 308 } else { 309 u64 buf = 0; 310 int cnt; 311 312 ksz_read64(dev, REG_IND_DATA_HI, &buf); 313 data_hi = (u32)(buf >> 32); 314 data_lo = (u32)buf; 315 316 /* Check out how many valid entry in the table. */ 317 cnt = data & DYNAMIC_MAC_TABLE_ENTRIES_H; 318 cnt <<= DYNAMIC_MAC_ENTRIES_H_S; 319 cnt |= (data_hi & DYNAMIC_MAC_TABLE_ENTRIES) >> 320 DYNAMIC_MAC_ENTRIES_S; 321 *entries = cnt + 1; 322 323 *fid = (data_hi & DYNAMIC_MAC_TABLE_FID) >> 324 DYNAMIC_MAC_FID_S; 325 *src_port = (data_hi & DYNAMIC_MAC_TABLE_SRC_PORT) >> 326 DYNAMIC_MAC_SRC_PORT_S; 327 *timestamp = (data_hi & DYNAMIC_MAC_TABLE_TIMESTAMP) >> 328 DYNAMIC_MAC_TIMESTAMP_S; 329 330 mac_addr[5] = (u8)data_lo; 331 mac_addr[4] = (u8)(data_lo >> 8); 332 mac_addr[3] = (u8)(data_lo >> 16); 333 mac_addr[2] = (u8)(data_lo >> 24); 334 335 mac_addr[1] = (u8)data_hi; 336 mac_addr[0] = (u8)(data_hi >> 8); 337 rc = 0; 338 } 339 mutex_unlock(&dev->alu_mutex); 340 341 return rc; 342 } 343 344 static int ksz8795_r_sta_mac_table(struct ksz_device *dev, u16 addr, 345 struct alu_struct *alu) 346 { 347 u32 data_hi, data_lo; 348 u64 data; 349 350 ksz8795_r_table(dev, TABLE_STATIC_MAC, addr, &data); 351 data_hi = data >> 32; 352 data_lo = (u32)data; 353 if (data_hi & (STATIC_MAC_TABLE_VALID | STATIC_MAC_TABLE_OVERRIDE)) { 354 alu->mac[5] = (u8)data_lo; 355 alu->mac[4] = (u8)(data_lo >> 8); 356 alu->mac[3] = (u8)(data_lo >> 16); 357 alu->mac[2] = (u8)(data_lo >> 24); 358 alu->mac[1] = (u8)data_hi; 359 alu->mac[0] = (u8)(data_hi >> 8); 360 alu->port_forward = (data_hi & STATIC_MAC_TABLE_FWD_PORTS) >> 361 STATIC_MAC_FWD_PORTS_S; 362 alu->is_override = 363 (data_hi & STATIC_MAC_TABLE_OVERRIDE) ? 1 : 0; 364 data_hi >>= 1; 365 alu->is_use_fid = (data_hi & STATIC_MAC_TABLE_USE_FID) ? 1 : 0; 366 alu->fid = (data_hi & STATIC_MAC_TABLE_FID) >> 367 STATIC_MAC_FID_S; 368 return 0; 369 } 370 return -ENXIO; 371 } 372 373 static void ksz8795_w_sta_mac_table(struct ksz_device *dev, u16 addr, 374 struct alu_struct *alu) 375 { 376 u32 data_hi, data_lo; 377 u64 data; 378 379 data_lo = ((u32)alu->mac[2] << 24) | 380 ((u32)alu->mac[3] << 16) | 381 ((u32)alu->mac[4] << 8) | alu->mac[5]; 382 data_hi = ((u32)alu->mac[0] << 8) | alu->mac[1]; 383 data_hi |= (u32)alu->port_forward << STATIC_MAC_FWD_PORTS_S; 384 385 if (alu->is_override) 386 data_hi |= STATIC_MAC_TABLE_OVERRIDE; 387 if (alu->is_use_fid) { 388 data_hi |= STATIC_MAC_TABLE_USE_FID; 389 data_hi |= (u32)alu->fid << STATIC_MAC_FID_S; 390 } 391 if (alu->is_static) 392 data_hi |= STATIC_MAC_TABLE_VALID; 393 else 394 data_hi &= ~STATIC_MAC_TABLE_OVERRIDE; 395 396 data = (u64)data_hi << 32 | data_lo; 397 ksz8795_w_table(dev, TABLE_STATIC_MAC, addr, data); 398 } 399 400 static void ksz8795_from_vlan(u16 vlan, u8 *fid, u8 *member, u8 *valid) 401 { 402 *fid = vlan & VLAN_TABLE_FID; 403 *member = (vlan & VLAN_TABLE_MEMBERSHIP) >> VLAN_TABLE_MEMBERSHIP_S; 404 *valid = !!(vlan & VLAN_TABLE_VALID); 405 } 406 407 static void ksz8795_to_vlan(u8 fid, u8 member, u8 valid, u16 *vlan) 408 { 409 *vlan = fid; 410 *vlan |= (u16)member << VLAN_TABLE_MEMBERSHIP_S; 411 if (valid) 412 *vlan |= VLAN_TABLE_VALID; 413 } 414 415 static void ksz8795_r_vlan_entries(struct ksz_device *dev, u16 addr) 416 { 417 u64 data; 418 int i; 419 420 ksz8795_r_table(dev, TABLE_VLAN, addr, &data); 421 addr *= 4; 422 for (i = 0; i < 4; i++) { 423 dev->vlan_cache[addr + i].table[0] = (u16)data; 424 data >>= VLAN_TABLE_S; 425 } 426 } 427 428 static void ksz8795_r_vlan_table(struct ksz_device *dev, u16 vid, u16 *vlan) 429 { 430 int index; 431 u16 *data; 432 u16 addr; 433 u64 buf; 434 435 data = (u16 *)&buf; 436 addr = vid / 4; 437 index = vid & 3; 438 ksz8795_r_table(dev, TABLE_VLAN, addr, &buf); 439 *vlan = data[index]; 440 } 441 442 static void ksz8795_w_vlan_table(struct ksz_device *dev, u16 vid, u16 vlan) 443 { 444 int index; 445 u16 *data; 446 u16 addr; 447 u64 buf; 448 449 data = (u16 *)&buf; 450 addr = vid / 4; 451 index = vid & 3; 452 ksz8795_r_table(dev, TABLE_VLAN, addr, &buf); 453 data[index] = vlan; 454 dev->vlan_cache[vid].table[0] = vlan; 455 ksz8795_w_table(dev, TABLE_VLAN, addr, buf); 456 } 457 458 static void ksz8795_r_phy(struct ksz_device *dev, u16 phy, u16 reg, u16 *val) 459 { 460 u8 restart, speed, ctrl, link; 461 int processed = true; 462 u16 data = 0; 463 u8 p = phy; 464 465 switch (reg) { 466 case PHY_REG_CTRL: 467 ksz_pread8(dev, p, P_NEG_RESTART_CTRL, &restart); 468 ksz_pread8(dev, p, P_SPEED_STATUS, &speed); 469 ksz_pread8(dev, p, P_FORCE_CTRL, &ctrl); 470 if (restart & PORT_PHY_LOOPBACK) 471 data |= PHY_LOOPBACK; 472 if (ctrl & PORT_FORCE_100_MBIT) 473 data |= PHY_SPEED_100MBIT; 474 if (!(ctrl & PORT_AUTO_NEG_DISABLE)) 475 data |= PHY_AUTO_NEG_ENABLE; 476 if (restart & PORT_POWER_DOWN) 477 data |= PHY_POWER_DOWN; 478 if (restart & PORT_AUTO_NEG_RESTART) 479 data |= PHY_AUTO_NEG_RESTART; 480 if (ctrl & PORT_FORCE_FULL_DUPLEX) 481 data |= PHY_FULL_DUPLEX; 482 if (speed & PORT_HP_MDIX) 483 data |= PHY_HP_MDIX; 484 if (restart & PORT_FORCE_MDIX) 485 data |= PHY_FORCE_MDIX; 486 if (restart & PORT_AUTO_MDIX_DISABLE) 487 data |= PHY_AUTO_MDIX_DISABLE; 488 if (restart & PORT_TX_DISABLE) 489 data |= PHY_TRANSMIT_DISABLE; 490 if (restart & PORT_LED_OFF) 491 data |= PHY_LED_DISABLE; 492 break; 493 case PHY_REG_STATUS: 494 ksz_pread8(dev, p, P_LINK_STATUS, &link); 495 data = PHY_100BTX_FD_CAPABLE | 496 PHY_100BTX_CAPABLE | 497 PHY_10BT_FD_CAPABLE | 498 PHY_10BT_CAPABLE | 499 PHY_AUTO_NEG_CAPABLE; 500 if (link & PORT_AUTO_NEG_COMPLETE) 501 data |= PHY_AUTO_NEG_ACKNOWLEDGE; 502 if (link & PORT_STAT_LINK_GOOD) 503 data |= PHY_LINK_STATUS; 504 break; 505 case PHY_REG_ID_1: 506 data = KSZ8795_ID_HI; 507 break; 508 case PHY_REG_ID_2: 509 data = KSZ8795_ID_LO; 510 break; 511 case PHY_REG_AUTO_NEGOTIATION: 512 ksz_pread8(dev, p, P_LOCAL_CTRL, &ctrl); 513 data = PHY_AUTO_NEG_802_3; 514 if (ctrl & PORT_AUTO_NEG_SYM_PAUSE) 515 data |= PHY_AUTO_NEG_SYM_PAUSE; 516 if (ctrl & PORT_AUTO_NEG_100BTX_FD) 517 data |= PHY_AUTO_NEG_100BTX_FD; 518 if (ctrl & PORT_AUTO_NEG_100BTX) 519 data |= PHY_AUTO_NEG_100BTX; 520 if (ctrl & PORT_AUTO_NEG_10BT_FD) 521 data |= PHY_AUTO_NEG_10BT_FD; 522 if (ctrl & PORT_AUTO_NEG_10BT) 523 data |= PHY_AUTO_NEG_10BT; 524 break; 525 case PHY_REG_REMOTE_CAPABILITY: 526 ksz_pread8(dev, p, P_REMOTE_STATUS, &link); 527 data = PHY_AUTO_NEG_802_3; 528 if (link & PORT_REMOTE_SYM_PAUSE) 529 data |= PHY_AUTO_NEG_SYM_PAUSE; 530 if (link & PORT_REMOTE_100BTX_FD) 531 data |= PHY_AUTO_NEG_100BTX_FD; 532 if (link & PORT_REMOTE_100BTX) 533 data |= PHY_AUTO_NEG_100BTX; 534 if (link & PORT_REMOTE_10BT_FD) 535 data |= PHY_AUTO_NEG_10BT_FD; 536 if (link & PORT_REMOTE_10BT) 537 data |= PHY_AUTO_NEG_10BT; 538 if (data & ~PHY_AUTO_NEG_802_3) 539 data |= PHY_REMOTE_ACKNOWLEDGE_NOT; 540 break; 541 default: 542 processed = false; 543 break; 544 } 545 if (processed) 546 *val = data; 547 } 548 549 static void ksz8795_w_phy(struct ksz_device *dev, u16 phy, u16 reg, u16 val) 550 { 551 u8 p = phy; 552 u8 restart, speed, ctrl, data; 553 554 switch (reg) { 555 case PHY_REG_CTRL: 556 557 /* Do not support PHY reset function. */ 558 if (val & PHY_RESET) 559 break; 560 ksz_pread8(dev, p, P_SPEED_STATUS, &speed); 561 data = speed; 562 if (val & PHY_HP_MDIX) 563 data |= PORT_HP_MDIX; 564 else 565 data &= ~PORT_HP_MDIX; 566 if (data != speed) 567 ksz_pwrite8(dev, p, P_SPEED_STATUS, data); 568 ksz_pread8(dev, p, P_FORCE_CTRL, &ctrl); 569 data = ctrl; 570 if (!(val & PHY_AUTO_NEG_ENABLE)) 571 data |= PORT_AUTO_NEG_DISABLE; 572 else 573 data &= ~PORT_AUTO_NEG_DISABLE; 574 575 /* Fiber port does not support auto-negotiation. */ 576 if (dev->ports[p].fiber) 577 data |= PORT_AUTO_NEG_DISABLE; 578 if (val & PHY_SPEED_100MBIT) 579 data |= PORT_FORCE_100_MBIT; 580 else 581 data &= ~PORT_FORCE_100_MBIT; 582 if (val & PHY_FULL_DUPLEX) 583 data |= PORT_FORCE_FULL_DUPLEX; 584 else 585 data &= ~PORT_FORCE_FULL_DUPLEX; 586 if (data != ctrl) 587 ksz_pwrite8(dev, p, P_FORCE_CTRL, data); 588 ksz_pread8(dev, p, P_NEG_RESTART_CTRL, &restart); 589 data = restart; 590 if (val & PHY_LED_DISABLE) 591 data |= PORT_LED_OFF; 592 else 593 data &= ~PORT_LED_OFF; 594 if (val & PHY_TRANSMIT_DISABLE) 595 data |= PORT_TX_DISABLE; 596 else 597 data &= ~PORT_TX_DISABLE; 598 if (val & PHY_AUTO_NEG_RESTART) 599 data |= PORT_AUTO_NEG_RESTART; 600 else 601 data &= ~(PORT_AUTO_NEG_RESTART); 602 if (val & PHY_POWER_DOWN) 603 data |= PORT_POWER_DOWN; 604 else 605 data &= ~PORT_POWER_DOWN; 606 if (val & PHY_AUTO_MDIX_DISABLE) 607 data |= PORT_AUTO_MDIX_DISABLE; 608 else 609 data &= ~PORT_AUTO_MDIX_DISABLE; 610 if (val & PHY_FORCE_MDIX) 611 data |= PORT_FORCE_MDIX; 612 else 613 data &= ~PORT_FORCE_MDIX; 614 if (val & PHY_LOOPBACK) 615 data |= PORT_PHY_LOOPBACK; 616 else 617 data &= ~PORT_PHY_LOOPBACK; 618 if (data != restart) 619 ksz_pwrite8(dev, p, P_NEG_RESTART_CTRL, data); 620 break; 621 case PHY_REG_AUTO_NEGOTIATION: 622 ksz_pread8(dev, p, P_LOCAL_CTRL, &ctrl); 623 data = ctrl; 624 data &= ~(PORT_AUTO_NEG_SYM_PAUSE | 625 PORT_AUTO_NEG_100BTX_FD | 626 PORT_AUTO_NEG_100BTX | 627 PORT_AUTO_NEG_10BT_FD | 628 PORT_AUTO_NEG_10BT); 629 if (val & PHY_AUTO_NEG_SYM_PAUSE) 630 data |= PORT_AUTO_NEG_SYM_PAUSE; 631 if (val & PHY_AUTO_NEG_100BTX_FD) 632 data |= PORT_AUTO_NEG_100BTX_FD; 633 if (val & PHY_AUTO_NEG_100BTX) 634 data |= PORT_AUTO_NEG_100BTX; 635 if (val & PHY_AUTO_NEG_10BT_FD) 636 data |= PORT_AUTO_NEG_10BT_FD; 637 if (val & PHY_AUTO_NEG_10BT) 638 data |= PORT_AUTO_NEG_10BT; 639 if (data != ctrl) 640 ksz_pwrite8(dev, p, P_LOCAL_CTRL, data); 641 break; 642 default: 643 break; 644 } 645 } 646 647 static enum dsa_tag_protocol ksz8795_get_tag_protocol(struct dsa_switch *ds, 648 int port, 649 enum dsa_tag_protocol mp) 650 { 651 return DSA_TAG_PROTO_KSZ8795; 652 } 653 654 static void ksz8795_get_strings(struct dsa_switch *ds, int port, 655 u32 stringset, uint8_t *buf) 656 { 657 int i; 658 659 for (i = 0; i < TOTAL_SWITCH_COUNTER_NUM; i++) { 660 memcpy(buf + i * ETH_GSTRING_LEN, mib_names[i].string, 661 ETH_GSTRING_LEN); 662 } 663 } 664 665 static void ksz8795_cfg_port_member(struct ksz_device *dev, int port, 666 u8 member) 667 { 668 u8 data; 669 670 ksz_pread8(dev, port, P_MIRROR_CTRL, &data); 671 data &= ~PORT_VLAN_MEMBERSHIP; 672 data |= (member & dev->port_mask); 673 ksz_pwrite8(dev, port, P_MIRROR_CTRL, data); 674 dev->ports[port].member = member; 675 } 676 677 static void ksz8795_port_stp_state_set(struct dsa_switch *ds, int port, 678 u8 state) 679 { 680 struct ksz_device *dev = ds->priv; 681 int forward = dev->member; 682 struct ksz_port *p; 683 int member = -1; 684 u8 data; 685 686 p = &dev->ports[port]; 687 688 ksz_pread8(dev, port, P_STP_CTRL, &data); 689 data &= ~(PORT_TX_ENABLE | PORT_RX_ENABLE | PORT_LEARN_DISABLE); 690 691 switch (state) { 692 case BR_STATE_DISABLED: 693 data |= PORT_LEARN_DISABLE; 694 if (port < SWITCH_PORT_NUM) 695 member = 0; 696 break; 697 case BR_STATE_LISTENING: 698 data |= (PORT_RX_ENABLE | PORT_LEARN_DISABLE); 699 if (port < SWITCH_PORT_NUM && 700 p->stp_state == BR_STATE_DISABLED) 701 member = dev->host_mask | p->vid_member; 702 break; 703 case BR_STATE_LEARNING: 704 data |= PORT_RX_ENABLE; 705 break; 706 case BR_STATE_FORWARDING: 707 data |= (PORT_TX_ENABLE | PORT_RX_ENABLE); 708 709 /* This function is also used internally. */ 710 if (port == dev->cpu_port) 711 break; 712 713 /* Port is a member of a bridge. */ 714 if (dev->br_member & BIT(port)) { 715 dev->member |= BIT(port); 716 member = dev->member; 717 } else { 718 member = dev->host_mask | p->vid_member; 719 } 720 break; 721 case BR_STATE_BLOCKING: 722 data |= PORT_LEARN_DISABLE; 723 if (port < SWITCH_PORT_NUM && 724 p->stp_state == BR_STATE_DISABLED) 725 member = dev->host_mask | p->vid_member; 726 break; 727 default: 728 dev_err(ds->dev, "invalid STP state: %d\n", state); 729 return; 730 } 731 732 ksz_pwrite8(dev, port, P_STP_CTRL, data); 733 p->stp_state = state; 734 /* Port membership may share register with STP state. */ 735 if (member >= 0 && member != p->member) 736 ksz8795_cfg_port_member(dev, port, (u8)member); 737 738 /* Check if forwarding needs to be updated. */ 739 if (state != BR_STATE_FORWARDING) { 740 if (dev->br_member & BIT(port)) 741 dev->member &= ~BIT(port); 742 } 743 744 /* When topology has changed the function ksz_update_port_member 745 * should be called to modify port forwarding behavior. 746 */ 747 if (forward != dev->member) 748 ksz_update_port_member(dev, port); 749 } 750 751 static void ksz8795_flush_dyn_mac_table(struct ksz_device *dev, int port) 752 { 753 u8 learn[TOTAL_PORT_NUM]; 754 int first, index, cnt; 755 struct ksz_port *p; 756 757 if ((uint)port < TOTAL_PORT_NUM) { 758 first = port; 759 cnt = port + 1; 760 } else { 761 /* Flush all ports. */ 762 first = 0; 763 cnt = dev->mib_port_cnt; 764 } 765 for (index = first; index < cnt; index++) { 766 p = &dev->ports[index]; 767 if (!p->on) 768 continue; 769 ksz_pread8(dev, index, P_STP_CTRL, &learn[index]); 770 if (!(learn[index] & PORT_LEARN_DISABLE)) 771 ksz_pwrite8(dev, index, P_STP_CTRL, 772 learn[index] | PORT_LEARN_DISABLE); 773 } 774 ksz_cfg(dev, S_FLUSH_TABLE_CTRL, SW_FLUSH_DYN_MAC_TABLE, true); 775 for (index = first; index < cnt; index++) { 776 p = &dev->ports[index]; 777 if (!p->on) 778 continue; 779 if (!(learn[index] & PORT_LEARN_DISABLE)) 780 ksz_pwrite8(dev, index, P_STP_CTRL, learn[index]); 781 } 782 } 783 784 static int ksz8795_port_vlan_filtering(struct dsa_switch *ds, int port, 785 bool flag) 786 { 787 struct ksz_device *dev = ds->priv; 788 789 ksz_cfg(dev, S_MIRROR_CTRL, SW_VLAN_ENABLE, flag); 790 791 return 0; 792 } 793 794 static void ksz8795_port_vlan_add(struct dsa_switch *ds, int port, 795 const struct switchdev_obj_port_vlan *vlan) 796 { 797 bool untagged = vlan->flags & BRIDGE_VLAN_INFO_UNTAGGED; 798 struct ksz_device *dev = ds->priv; 799 u16 data, vid, new_pvid = 0; 800 u8 fid, member, valid; 801 802 ksz_port_cfg(dev, port, P_TAG_CTRL, PORT_REMOVE_TAG, untagged); 803 804 for (vid = vlan->vid_begin; vid <= vlan->vid_end; vid++) { 805 ksz8795_r_vlan_table(dev, vid, &data); 806 ksz8795_from_vlan(data, &fid, &member, &valid); 807 808 /* First time to setup the VLAN entry. */ 809 if (!valid) { 810 /* Need to find a way to map VID to FID. */ 811 fid = 1; 812 valid = 1; 813 } 814 member |= BIT(port); 815 816 ksz8795_to_vlan(fid, member, valid, &data); 817 ksz8795_w_vlan_table(dev, vid, data); 818 819 /* change PVID */ 820 if (vlan->flags & BRIDGE_VLAN_INFO_PVID) 821 new_pvid = vid; 822 } 823 824 if (new_pvid) { 825 ksz_pread16(dev, port, REG_PORT_CTRL_VID, &vid); 826 vid &= 0xfff; 827 vid |= new_pvid; 828 ksz_pwrite16(dev, port, REG_PORT_CTRL_VID, vid); 829 } 830 } 831 832 static int ksz8795_port_vlan_del(struct dsa_switch *ds, int port, 833 const struct switchdev_obj_port_vlan *vlan) 834 { 835 bool untagged = vlan->flags & BRIDGE_VLAN_INFO_UNTAGGED; 836 struct ksz_device *dev = ds->priv; 837 u16 data, vid, pvid, new_pvid = 0; 838 u8 fid, member, valid; 839 840 ksz_pread16(dev, port, REG_PORT_CTRL_VID, &pvid); 841 pvid = pvid & 0xFFF; 842 843 ksz_port_cfg(dev, port, P_TAG_CTRL, PORT_REMOVE_TAG, untagged); 844 845 for (vid = vlan->vid_begin; vid <= vlan->vid_end; vid++) { 846 ksz8795_r_vlan_table(dev, vid, &data); 847 ksz8795_from_vlan(data, &fid, &member, &valid); 848 849 member &= ~BIT(port); 850 851 /* Invalidate the entry if no more member. */ 852 if (!member) { 853 fid = 0; 854 valid = 0; 855 } 856 857 if (pvid == vid) 858 new_pvid = 1; 859 860 ksz8795_to_vlan(fid, member, valid, &data); 861 ksz8795_w_vlan_table(dev, vid, data); 862 } 863 864 if (new_pvid != pvid) 865 ksz_pwrite16(dev, port, REG_PORT_CTRL_VID, pvid); 866 867 return 0; 868 } 869 870 static int ksz8795_port_mirror_add(struct dsa_switch *ds, int port, 871 struct dsa_mall_mirror_tc_entry *mirror, 872 bool ingress) 873 { 874 struct ksz_device *dev = ds->priv; 875 876 if (ingress) { 877 ksz_port_cfg(dev, port, P_MIRROR_CTRL, PORT_MIRROR_RX, true); 878 dev->mirror_rx |= BIT(port); 879 } else { 880 ksz_port_cfg(dev, port, P_MIRROR_CTRL, PORT_MIRROR_TX, true); 881 dev->mirror_tx |= BIT(port); 882 } 883 884 ksz_port_cfg(dev, port, P_MIRROR_CTRL, PORT_MIRROR_SNIFFER, false); 885 886 /* configure mirror port */ 887 if (dev->mirror_rx || dev->mirror_tx) 888 ksz_port_cfg(dev, mirror->to_local_port, P_MIRROR_CTRL, 889 PORT_MIRROR_SNIFFER, true); 890 891 return 0; 892 } 893 894 static void ksz8795_port_mirror_del(struct dsa_switch *ds, int port, 895 struct dsa_mall_mirror_tc_entry *mirror) 896 { 897 struct ksz_device *dev = ds->priv; 898 u8 data; 899 900 if (mirror->ingress) { 901 ksz_port_cfg(dev, port, P_MIRROR_CTRL, PORT_MIRROR_RX, false); 902 dev->mirror_rx &= ~BIT(port); 903 } else { 904 ksz_port_cfg(dev, port, P_MIRROR_CTRL, PORT_MIRROR_TX, false); 905 dev->mirror_tx &= ~BIT(port); 906 } 907 908 ksz_pread8(dev, port, P_MIRROR_CTRL, &data); 909 910 if (!dev->mirror_rx && !dev->mirror_tx) 911 ksz_port_cfg(dev, mirror->to_local_port, P_MIRROR_CTRL, 912 PORT_MIRROR_SNIFFER, false); 913 } 914 915 static void ksz8795_port_setup(struct ksz_device *dev, int port, bool cpu_port) 916 { 917 struct ksz_port *p = &dev->ports[port]; 918 u8 data8, member; 919 920 /* enable broadcast storm limit */ 921 ksz_port_cfg(dev, port, P_BCAST_STORM_CTRL, PORT_BROADCAST_STORM, true); 922 923 ksz8795_set_prio_queue(dev, port, 4); 924 925 /* disable DiffServ priority */ 926 ksz_port_cfg(dev, port, P_PRIO_CTRL, PORT_DIFFSERV_ENABLE, false); 927 928 /* replace priority */ 929 ksz_port_cfg(dev, port, P_802_1P_CTRL, PORT_802_1P_REMAPPING, false); 930 931 /* enable 802.1p priority */ 932 ksz_port_cfg(dev, port, P_PRIO_CTRL, PORT_802_1P_ENABLE, true); 933 934 if (cpu_port) { 935 if (!p->interface && dev->compat_interface) { 936 dev_warn(dev->dev, 937 "Using legacy switch \"phy-mode\" property, because it is missing on port %d node. " 938 "Please update your device tree.\n", 939 port); 940 p->interface = dev->compat_interface; 941 } 942 943 /* Configure MII interface for proper network communication. */ 944 ksz_read8(dev, REG_PORT_5_CTRL_6, &data8); 945 data8 &= ~PORT_INTERFACE_TYPE; 946 data8 &= ~PORT_GMII_1GPS_MODE; 947 switch (p->interface) { 948 case PHY_INTERFACE_MODE_MII: 949 p->phydev.speed = SPEED_100; 950 break; 951 case PHY_INTERFACE_MODE_RMII: 952 data8 |= PORT_INTERFACE_RMII; 953 p->phydev.speed = SPEED_100; 954 break; 955 case PHY_INTERFACE_MODE_GMII: 956 data8 |= PORT_GMII_1GPS_MODE; 957 data8 |= PORT_INTERFACE_GMII; 958 p->phydev.speed = SPEED_1000; 959 break; 960 default: 961 data8 &= ~PORT_RGMII_ID_IN_ENABLE; 962 data8 &= ~PORT_RGMII_ID_OUT_ENABLE; 963 if (p->interface == PHY_INTERFACE_MODE_RGMII_ID || 964 p->interface == PHY_INTERFACE_MODE_RGMII_RXID) 965 data8 |= PORT_RGMII_ID_IN_ENABLE; 966 if (p->interface == PHY_INTERFACE_MODE_RGMII_ID || 967 p->interface == PHY_INTERFACE_MODE_RGMII_TXID) 968 data8 |= PORT_RGMII_ID_OUT_ENABLE; 969 data8 |= PORT_GMII_1GPS_MODE; 970 data8 |= PORT_INTERFACE_RGMII; 971 p->phydev.speed = SPEED_1000; 972 break; 973 } 974 ksz_write8(dev, REG_PORT_5_CTRL_6, data8); 975 p->phydev.duplex = 1; 976 977 member = dev->port_mask; 978 } else { 979 member = dev->host_mask | p->vid_member; 980 } 981 ksz8795_cfg_port_member(dev, port, member); 982 } 983 984 static void ksz8795_config_cpu_port(struct dsa_switch *ds) 985 { 986 struct ksz_device *dev = ds->priv; 987 struct ksz_port *p; 988 u8 remote; 989 int i; 990 991 ds->num_ports = dev->port_cnt + 1; 992 993 /* Switch marks the maximum frame with extra byte as oversize. */ 994 ksz_cfg(dev, REG_SW_CTRL_2, SW_LEGAL_PACKET_DISABLE, true); 995 ksz_cfg(dev, S_TAIL_TAG_CTRL, SW_TAIL_TAG_ENABLE, true); 996 997 p = &dev->ports[dev->cpu_port]; 998 p->vid_member = dev->port_mask; 999 p->on = 1; 1000 1001 ksz8795_port_setup(dev, dev->cpu_port, true); 1002 dev->member = dev->host_mask; 1003 1004 for (i = 0; i < SWITCH_PORT_NUM; i++) { 1005 p = &dev->ports[i]; 1006 1007 /* Initialize to non-zero so that ksz_cfg_port_member() will 1008 * be called. 1009 */ 1010 p->vid_member = BIT(i); 1011 p->member = dev->port_mask; 1012 ksz8795_port_stp_state_set(ds, i, BR_STATE_DISABLED); 1013 1014 /* Last port may be disabled. */ 1015 if (i == dev->port_cnt) 1016 break; 1017 p->on = 1; 1018 p->phy = 1; 1019 } 1020 for (i = 0; i < dev->phy_port_cnt; i++) { 1021 p = &dev->ports[i]; 1022 if (!p->on) 1023 continue; 1024 ksz_pread8(dev, i, P_REMOTE_STATUS, &remote); 1025 if (remote & PORT_FIBER_MODE) 1026 p->fiber = 1; 1027 if (p->fiber) 1028 ksz_port_cfg(dev, i, P_STP_CTRL, PORT_FORCE_FLOW_CTRL, 1029 true); 1030 else 1031 ksz_port_cfg(dev, i, P_STP_CTRL, PORT_FORCE_FLOW_CTRL, 1032 false); 1033 } 1034 } 1035 1036 static int ksz8795_setup(struct dsa_switch *ds) 1037 { 1038 struct ksz_device *dev = ds->priv; 1039 struct alu_struct alu; 1040 int i, ret = 0; 1041 1042 dev->vlan_cache = devm_kcalloc(dev->dev, sizeof(struct vlan_table), 1043 dev->num_vlans, GFP_KERNEL); 1044 if (!dev->vlan_cache) 1045 return -ENOMEM; 1046 1047 ret = ksz8795_reset_switch(dev); 1048 if (ret) { 1049 dev_err(ds->dev, "failed to reset switch\n"); 1050 return ret; 1051 } 1052 1053 ksz_cfg(dev, S_REPLACE_VID_CTRL, SW_FLOW_CTRL, true); 1054 1055 /* Enable automatic fast aging when link changed detected. */ 1056 ksz_cfg(dev, S_LINK_AGING_CTRL, SW_LINK_AUTO_AGING, true); 1057 1058 /* Enable aggressive back off algorithm in half duplex mode. */ 1059 regmap_update_bits(dev->regmap[0], REG_SW_CTRL_1, 1060 SW_AGGR_BACKOFF, SW_AGGR_BACKOFF); 1061 1062 /* 1063 * Make sure unicast VLAN boundary is set as default and 1064 * enable no excessive collision drop. 1065 */ 1066 regmap_update_bits(dev->regmap[0], REG_SW_CTRL_2, 1067 UNICAST_VLAN_BOUNDARY | NO_EXC_COLLISION_DROP, 1068 UNICAST_VLAN_BOUNDARY | NO_EXC_COLLISION_DROP); 1069 1070 ksz8795_config_cpu_port(ds); 1071 1072 ksz_cfg(dev, REG_SW_CTRL_2, MULTICAST_STORM_DISABLE, true); 1073 1074 ksz_cfg(dev, S_REPLACE_VID_CTRL, SW_REPLACE_VID, false); 1075 1076 ksz_cfg(dev, S_MIRROR_CTRL, SW_MIRROR_RX_TX, false); 1077 1078 /* set broadcast storm protection 10% rate */ 1079 regmap_update_bits(dev->regmap[1], S_REPLACE_VID_CTRL, 1080 BROADCAST_STORM_RATE, 1081 (BROADCAST_STORM_VALUE * 1082 BROADCAST_STORM_PROT_RATE) / 100); 1083 1084 for (i = 0; i < VLAN_TABLE_ENTRIES; i++) 1085 ksz8795_r_vlan_entries(dev, i); 1086 1087 /* Setup STP address for STP operation. */ 1088 memset(&alu, 0, sizeof(alu)); 1089 ether_addr_copy(alu.mac, eth_stp_addr); 1090 alu.is_static = true; 1091 alu.is_override = true; 1092 alu.port_forward = dev->host_mask; 1093 1094 ksz8795_w_sta_mac_table(dev, 0, &alu); 1095 1096 ksz_init_mib_timer(dev); 1097 1098 return 0; 1099 } 1100 1101 static const struct dsa_switch_ops ksz8795_switch_ops = { 1102 .get_tag_protocol = ksz8795_get_tag_protocol, 1103 .setup = ksz8795_setup, 1104 .phy_read = ksz_phy_read16, 1105 .phy_write = ksz_phy_write16, 1106 .phylink_mac_link_down = ksz_mac_link_down, 1107 .port_enable = ksz_enable_port, 1108 .get_strings = ksz8795_get_strings, 1109 .get_ethtool_stats = ksz_get_ethtool_stats, 1110 .get_sset_count = ksz_sset_count, 1111 .port_bridge_join = ksz_port_bridge_join, 1112 .port_bridge_leave = ksz_port_bridge_leave, 1113 .port_stp_state_set = ksz8795_port_stp_state_set, 1114 .port_fast_age = ksz_port_fast_age, 1115 .port_vlan_filtering = ksz8795_port_vlan_filtering, 1116 .port_vlan_prepare = ksz_port_vlan_prepare, 1117 .port_vlan_add = ksz8795_port_vlan_add, 1118 .port_vlan_del = ksz8795_port_vlan_del, 1119 .port_fdb_dump = ksz_port_fdb_dump, 1120 .port_mdb_prepare = ksz_port_mdb_prepare, 1121 .port_mdb_add = ksz_port_mdb_add, 1122 .port_mdb_del = ksz_port_mdb_del, 1123 .port_mirror_add = ksz8795_port_mirror_add, 1124 .port_mirror_del = ksz8795_port_mirror_del, 1125 }; 1126 1127 static u32 ksz8795_get_port_addr(int port, int offset) 1128 { 1129 return PORT_CTRL_ADDR(port, offset); 1130 } 1131 1132 static int ksz8795_switch_detect(struct ksz_device *dev) 1133 { 1134 u8 id1, id2; 1135 u16 id16; 1136 int ret; 1137 1138 /* read chip id */ 1139 ret = ksz_read16(dev, REG_CHIP_ID0, &id16); 1140 if (ret) 1141 return ret; 1142 1143 id1 = id16 >> 8; 1144 id2 = id16 & SW_CHIP_ID_M; 1145 if (id1 != FAMILY_ID || 1146 (id2 != CHIP_ID_94 && id2 != CHIP_ID_95)) 1147 return -ENODEV; 1148 1149 dev->mib_port_cnt = TOTAL_PORT_NUM; 1150 dev->phy_port_cnt = SWITCH_PORT_NUM; 1151 dev->port_cnt = SWITCH_PORT_NUM; 1152 1153 if (id2 == CHIP_ID_95) { 1154 u8 val; 1155 1156 id2 = 0x95; 1157 ksz_read8(dev, REG_PORT_1_STATUS_0, &val); 1158 if (val & PORT_FIBER_MODE) 1159 id2 = 0x65; 1160 } else if (id2 == CHIP_ID_94) { 1161 dev->port_cnt--; 1162 dev->last_port = dev->port_cnt; 1163 id2 = 0x94; 1164 } 1165 id16 &= ~0xff; 1166 id16 |= id2; 1167 dev->chip_id = id16; 1168 1169 dev->cpu_port = dev->mib_port_cnt - 1; 1170 dev->host_mask = BIT(dev->cpu_port); 1171 1172 return 0; 1173 } 1174 1175 struct ksz_chip_data { 1176 u16 chip_id; 1177 const char *dev_name; 1178 int num_vlans; 1179 int num_alus; 1180 int num_statics; 1181 int cpu_ports; 1182 int port_cnt; 1183 }; 1184 1185 static const struct ksz_chip_data ksz8795_switch_chips[] = { 1186 { 1187 .chip_id = 0x8795, 1188 .dev_name = "KSZ8795", 1189 .num_vlans = 4096, 1190 .num_alus = 0, 1191 .num_statics = 8, 1192 .cpu_ports = 0x10, /* can be configured as cpu port */ 1193 .port_cnt = 4, /* total physical port count */ 1194 }, 1195 { 1196 .chip_id = 0x8794, 1197 .dev_name = "KSZ8794", 1198 .num_vlans = 4096, 1199 .num_alus = 0, 1200 .num_statics = 8, 1201 .cpu_ports = 0x10, /* can be configured as cpu port */ 1202 .port_cnt = 3, /* total physical port count */ 1203 }, 1204 { 1205 .chip_id = 0x8765, 1206 .dev_name = "KSZ8765", 1207 .num_vlans = 4096, 1208 .num_alus = 0, 1209 .num_statics = 8, 1210 .cpu_ports = 0x10, /* can be configured as cpu port */ 1211 .port_cnt = 4, /* total physical port count */ 1212 }, 1213 }; 1214 1215 static int ksz8795_switch_init(struct ksz_device *dev) 1216 { 1217 int i; 1218 1219 dev->ds->ops = &ksz8795_switch_ops; 1220 1221 for (i = 0; i < ARRAY_SIZE(ksz8795_switch_chips); i++) { 1222 const struct ksz_chip_data *chip = &ksz8795_switch_chips[i]; 1223 1224 if (dev->chip_id == chip->chip_id) { 1225 dev->name = chip->dev_name; 1226 dev->num_vlans = chip->num_vlans; 1227 dev->num_alus = chip->num_alus; 1228 dev->num_statics = chip->num_statics; 1229 dev->port_cnt = chip->port_cnt; 1230 dev->cpu_ports = chip->cpu_ports; 1231 1232 break; 1233 } 1234 } 1235 1236 /* no switch found */ 1237 if (!dev->cpu_ports) 1238 return -ENODEV; 1239 1240 dev->port_mask = BIT(dev->port_cnt) - 1; 1241 dev->port_mask |= dev->host_mask; 1242 1243 dev->reg_mib_cnt = SWITCH_COUNTER_NUM; 1244 dev->mib_cnt = TOTAL_SWITCH_COUNTER_NUM; 1245 1246 i = dev->mib_port_cnt; 1247 dev->ports = devm_kzalloc(dev->dev, sizeof(struct ksz_port) * i, 1248 GFP_KERNEL); 1249 if (!dev->ports) 1250 return -ENOMEM; 1251 for (i = 0; i < dev->mib_port_cnt; i++) { 1252 mutex_init(&dev->ports[i].mib.cnt_mutex); 1253 dev->ports[i].mib.counters = 1254 devm_kzalloc(dev->dev, 1255 sizeof(u64) * 1256 (TOTAL_SWITCH_COUNTER_NUM + 1), 1257 GFP_KERNEL); 1258 if (!dev->ports[i].mib.counters) 1259 return -ENOMEM; 1260 } 1261 1262 /* set the real number of ports */ 1263 dev->ds->num_ports = dev->port_cnt + 1; 1264 1265 return 0; 1266 } 1267 1268 static void ksz8795_switch_exit(struct ksz_device *dev) 1269 { 1270 ksz8795_reset_switch(dev); 1271 } 1272 1273 static const struct ksz_dev_ops ksz8795_dev_ops = { 1274 .get_port_addr = ksz8795_get_port_addr, 1275 .cfg_port_member = ksz8795_cfg_port_member, 1276 .flush_dyn_mac_table = ksz8795_flush_dyn_mac_table, 1277 .port_setup = ksz8795_port_setup, 1278 .r_phy = ksz8795_r_phy, 1279 .w_phy = ksz8795_w_phy, 1280 .r_dyn_mac_table = ksz8795_r_dyn_mac_table, 1281 .r_sta_mac_table = ksz8795_r_sta_mac_table, 1282 .w_sta_mac_table = ksz8795_w_sta_mac_table, 1283 .r_mib_cnt = ksz8795_r_mib_cnt, 1284 .r_mib_pkt = ksz8795_r_mib_pkt, 1285 .freeze_mib = ksz8795_freeze_mib, 1286 .port_init_cnt = ksz8795_port_init_cnt, 1287 .shutdown = ksz8795_reset_switch, 1288 .detect = ksz8795_switch_detect, 1289 .init = ksz8795_switch_init, 1290 .exit = ksz8795_switch_exit, 1291 }; 1292 1293 int ksz8795_switch_register(struct ksz_device *dev) 1294 { 1295 return ksz_switch_register(dev, &ksz8795_dev_ops); 1296 } 1297 EXPORT_SYMBOL(ksz8795_switch_register); 1298 1299 MODULE_AUTHOR("Tristram Ha <Tristram.Ha@microchip.com>"); 1300 MODULE_DESCRIPTION("Microchip KSZ8795 Series Switch DSA Driver"); 1301 MODULE_LICENSE("GPL"); 1302