1 // SPDX-License-Identifier: GPL-2.0
2 /*
3  * Microchip KSZ8795 switch driver
4  *
5  * Copyright (C) 2017 Microchip Technology Inc.
6  *	Tristram Ha <Tristram.Ha@microchip.com>
7  */
8 
9 #include <linux/delay.h>
10 #include <linux/export.h>
11 #include <linux/gpio.h>
12 #include <linux/kernel.h>
13 #include <linux/module.h>
14 #include <linux/platform_data/microchip-ksz.h>
15 #include <linux/phy.h>
16 #include <linux/etherdevice.h>
17 #include <linux/if_bridge.h>
18 #include <net/dsa.h>
19 #include <net/switchdev.h>
20 
21 #include "ksz_common.h"
22 #include "ksz8795_reg.h"
23 
24 static const struct {
25 	char string[ETH_GSTRING_LEN];
26 } mib_names[TOTAL_SWITCH_COUNTER_NUM] = {
27 	{ "rx_hi" },
28 	{ "rx_undersize" },
29 	{ "rx_fragments" },
30 	{ "rx_oversize" },
31 	{ "rx_jabbers" },
32 	{ "rx_symbol_err" },
33 	{ "rx_crc_err" },
34 	{ "rx_align_err" },
35 	{ "rx_mac_ctrl" },
36 	{ "rx_pause" },
37 	{ "rx_bcast" },
38 	{ "rx_mcast" },
39 	{ "rx_ucast" },
40 	{ "rx_64_or_less" },
41 	{ "rx_65_127" },
42 	{ "rx_128_255" },
43 	{ "rx_256_511" },
44 	{ "rx_512_1023" },
45 	{ "rx_1024_1522" },
46 	{ "rx_1523_2000" },
47 	{ "rx_2001" },
48 	{ "tx_hi" },
49 	{ "tx_late_col" },
50 	{ "tx_pause" },
51 	{ "tx_bcast" },
52 	{ "tx_mcast" },
53 	{ "tx_ucast" },
54 	{ "tx_deferred" },
55 	{ "tx_total_col" },
56 	{ "tx_exc_col" },
57 	{ "tx_single_col" },
58 	{ "tx_mult_col" },
59 	{ "rx_total" },
60 	{ "tx_total" },
61 	{ "rx_discards" },
62 	{ "tx_discards" },
63 };
64 
65 static void ksz_cfg(struct ksz_device *dev, u32 addr, u8 bits, bool set)
66 {
67 	regmap_update_bits(dev->regmap[0], addr, bits, set ? bits : 0);
68 }
69 
70 static void ksz_port_cfg(struct ksz_device *dev, int port, int offset, u8 bits,
71 			 bool set)
72 {
73 	regmap_update_bits(dev->regmap[0], PORT_CTRL_ADDR(port, offset),
74 			   bits, set ? bits : 0);
75 }
76 
77 static int ksz8795_reset_switch(struct ksz_device *dev)
78 {
79 	/* reset switch */
80 	ksz_write8(dev, REG_POWER_MANAGEMENT_1,
81 		   SW_SOFTWARE_POWER_DOWN << SW_POWER_MANAGEMENT_MODE_S);
82 	ksz_write8(dev, REG_POWER_MANAGEMENT_1, 0);
83 
84 	return 0;
85 }
86 
87 static void ksz8795_set_prio_queue(struct ksz_device *dev, int port, int queue)
88 {
89 	u8 hi, lo;
90 
91 	/* Number of queues can only be 1, 2, or 4. */
92 	switch (queue) {
93 	case 4:
94 	case 3:
95 		queue = PORT_QUEUE_SPLIT_4;
96 		break;
97 	case 2:
98 		queue = PORT_QUEUE_SPLIT_2;
99 		break;
100 	default:
101 		queue = PORT_QUEUE_SPLIT_1;
102 	}
103 	ksz_pread8(dev, port, REG_PORT_CTRL_0, &lo);
104 	ksz_pread8(dev, port, P_DROP_TAG_CTRL, &hi);
105 	lo &= ~PORT_QUEUE_SPLIT_L;
106 	if (queue & PORT_QUEUE_SPLIT_2)
107 		lo |= PORT_QUEUE_SPLIT_L;
108 	hi &= ~PORT_QUEUE_SPLIT_H;
109 	if (queue & PORT_QUEUE_SPLIT_4)
110 		hi |= PORT_QUEUE_SPLIT_H;
111 	ksz_pwrite8(dev, port, REG_PORT_CTRL_0, lo);
112 	ksz_pwrite8(dev, port, P_DROP_TAG_CTRL, hi);
113 
114 	/* Default is port based for egress rate limit. */
115 	if (queue != PORT_QUEUE_SPLIT_1)
116 		ksz_cfg(dev, REG_SW_CTRL_19, SW_OUT_RATE_LIMIT_QUEUE_BASED,
117 			true);
118 }
119 
120 static void ksz8795_r_mib_cnt(struct ksz_device *dev, int port, u16 addr,
121 			      u64 *cnt)
122 {
123 	u16 ctrl_addr;
124 	u32 data;
125 	u8 check;
126 	int loop;
127 
128 	ctrl_addr = addr + SWITCH_COUNTER_NUM * port;
129 	ctrl_addr |= IND_ACC_TABLE(TABLE_MIB | TABLE_READ);
130 
131 	mutex_lock(&dev->alu_mutex);
132 	ksz_write16(dev, REG_IND_CTRL_0, ctrl_addr);
133 
134 	/* It is almost guaranteed to always read the valid bit because of
135 	 * slow SPI speed.
136 	 */
137 	for (loop = 2; loop > 0; loop--) {
138 		ksz_read8(dev, REG_IND_MIB_CHECK, &check);
139 
140 		if (check & MIB_COUNTER_VALID) {
141 			ksz_read32(dev, REG_IND_DATA_LO, &data);
142 			if (check & MIB_COUNTER_OVERFLOW)
143 				*cnt += MIB_COUNTER_VALUE + 1;
144 			*cnt += data & MIB_COUNTER_VALUE;
145 			break;
146 		}
147 	}
148 	mutex_unlock(&dev->alu_mutex);
149 }
150 
151 static void ksz8795_r_mib_pkt(struct ksz_device *dev, int port, u16 addr,
152 			      u64 *dropped, u64 *cnt)
153 {
154 	u16 ctrl_addr;
155 	u32 data;
156 	u8 check;
157 	int loop;
158 
159 	addr -= SWITCH_COUNTER_NUM;
160 	ctrl_addr = (KS_MIB_TOTAL_RX_1 - KS_MIB_TOTAL_RX_0) * port;
161 	ctrl_addr += addr + KS_MIB_TOTAL_RX_0;
162 	ctrl_addr |= IND_ACC_TABLE(TABLE_MIB | TABLE_READ);
163 
164 	mutex_lock(&dev->alu_mutex);
165 	ksz_write16(dev, REG_IND_CTRL_0, ctrl_addr);
166 
167 	/* It is almost guaranteed to always read the valid bit because of
168 	 * slow SPI speed.
169 	 */
170 	for (loop = 2; loop > 0; loop--) {
171 		ksz_read8(dev, REG_IND_MIB_CHECK, &check);
172 
173 		if (check & MIB_COUNTER_VALID) {
174 			ksz_read32(dev, REG_IND_DATA_LO, &data);
175 			if (addr < 2) {
176 				u64 total;
177 
178 				total = check & MIB_TOTAL_BYTES_H;
179 				total <<= 32;
180 				*cnt += total;
181 				*cnt += data;
182 				if (check & MIB_COUNTER_OVERFLOW) {
183 					total = MIB_TOTAL_BYTES_H + 1;
184 					total <<= 32;
185 					*cnt += total;
186 				}
187 			} else {
188 				if (check & MIB_COUNTER_OVERFLOW)
189 					*cnt += MIB_PACKET_DROPPED + 1;
190 				*cnt += data & MIB_PACKET_DROPPED;
191 			}
192 			break;
193 		}
194 	}
195 	mutex_unlock(&dev->alu_mutex);
196 }
197 
198 static void ksz8795_freeze_mib(struct ksz_device *dev, int port, bool freeze)
199 {
200 	/* enable the port for flush/freeze function */
201 	if (freeze)
202 		ksz_cfg(dev, REG_SW_CTRL_6, BIT(port), true);
203 	ksz_cfg(dev, REG_SW_CTRL_6, SW_MIB_COUNTER_FREEZE, freeze);
204 
205 	/* disable the port after freeze is done */
206 	if (!freeze)
207 		ksz_cfg(dev, REG_SW_CTRL_6, BIT(port), false);
208 }
209 
210 static void ksz8795_port_init_cnt(struct ksz_device *dev, int port)
211 {
212 	struct ksz_port_mib *mib = &dev->ports[port].mib;
213 
214 	/* flush all enabled port MIB counters */
215 	ksz_cfg(dev, REG_SW_CTRL_6, BIT(port), true);
216 	ksz_cfg(dev, REG_SW_CTRL_6, SW_MIB_COUNTER_FLUSH, true);
217 	ksz_cfg(dev, REG_SW_CTRL_6, BIT(port), false);
218 
219 	mib->cnt_ptr = 0;
220 
221 	/* Some ports may not have MIB counters before SWITCH_COUNTER_NUM. */
222 	while (mib->cnt_ptr < dev->reg_mib_cnt) {
223 		dev->dev_ops->r_mib_cnt(dev, port, mib->cnt_ptr,
224 					&mib->counters[mib->cnt_ptr]);
225 		++mib->cnt_ptr;
226 	}
227 
228 	/* Some ports may not have MIB counters after SWITCH_COUNTER_NUM. */
229 	while (mib->cnt_ptr < dev->mib_cnt) {
230 		dev->dev_ops->r_mib_pkt(dev, port, mib->cnt_ptr,
231 					NULL, &mib->counters[mib->cnt_ptr]);
232 		++mib->cnt_ptr;
233 	}
234 	mib->cnt_ptr = 0;
235 	memset(mib->counters, 0, dev->mib_cnt * sizeof(u64));
236 }
237 
238 static void ksz8795_r_table(struct ksz_device *dev, int table, u16 addr,
239 			    u64 *data)
240 {
241 	u16 ctrl_addr;
242 
243 	ctrl_addr = IND_ACC_TABLE(table | TABLE_READ) | addr;
244 
245 	mutex_lock(&dev->alu_mutex);
246 	ksz_write16(dev, REG_IND_CTRL_0, ctrl_addr);
247 	ksz_read64(dev, REG_IND_DATA_HI, data);
248 	mutex_unlock(&dev->alu_mutex);
249 }
250 
251 static void ksz8795_w_table(struct ksz_device *dev, int table, u16 addr,
252 			    u64 data)
253 {
254 	u16 ctrl_addr;
255 
256 	ctrl_addr = IND_ACC_TABLE(table) | addr;
257 
258 	mutex_lock(&dev->alu_mutex);
259 	ksz_write64(dev, REG_IND_DATA_HI, data);
260 	ksz_write16(dev, REG_IND_CTRL_0, ctrl_addr);
261 	mutex_unlock(&dev->alu_mutex);
262 }
263 
264 static int ksz8795_valid_dyn_entry(struct ksz_device *dev, u8 *data)
265 {
266 	int timeout = 100;
267 
268 	do {
269 		ksz_read8(dev, REG_IND_DATA_CHECK, data);
270 		timeout--;
271 	} while ((*data & DYNAMIC_MAC_TABLE_NOT_READY) && timeout);
272 
273 	/* Entry is not ready for accessing. */
274 	if (*data & DYNAMIC_MAC_TABLE_NOT_READY) {
275 		return -EAGAIN;
276 	/* Entry is ready for accessing. */
277 	} else {
278 		ksz_read8(dev, REG_IND_DATA_8, data);
279 
280 		/* There is no valid entry in the table. */
281 		if (*data & DYNAMIC_MAC_TABLE_MAC_EMPTY)
282 			return -ENXIO;
283 	}
284 	return 0;
285 }
286 
287 static int ksz8795_r_dyn_mac_table(struct ksz_device *dev, u16 addr,
288 				   u8 *mac_addr, u8 *fid, u8 *src_port,
289 				   u8 *timestamp, u16 *entries)
290 {
291 	u32 data_hi, data_lo;
292 	u16 ctrl_addr;
293 	u8 data;
294 	int rc;
295 
296 	ctrl_addr = IND_ACC_TABLE(TABLE_DYNAMIC_MAC | TABLE_READ) | addr;
297 
298 	mutex_lock(&dev->alu_mutex);
299 	ksz_write16(dev, REG_IND_CTRL_0, ctrl_addr);
300 
301 	rc = ksz8795_valid_dyn_entry(dev, &data);
302 	if (rc == -EAGAIN) {
303 		if (addr == 0)
304 			*entries = 0;
305 	} else if (rc == -ENXIO) {
306 		*entries = 0;
307 	/* At least one valid entry in the table. */
308 	} else {
309 		u64 buf = 0;
310 		int cnt;
311 
312 		ksz_read64(dev, REG_IND_DATA_HI, &buf);
313 		data_hi = (u32)(buf >> 32);
314 		data_lo = (u32)buf;
315 
316 		/* Check out how many valid entry in the table. */
317 		cnt = data & DYNAMIC_MAC_TABLE_ENTRIES_H;
318 		cnt <<= DYNAMIC_MAC_ENTRIES_H_S;
319 		cnt |= (data_hi & DYNAMIC_MAC_TABLE_ENTRIES) >>
320 			DYNAMIC_MAC_ENTRIES_S;
321 		*entries = cnt + 1;
322 
323 		*fid = (data_hi & DYNAMIC_MAC_TABLE_FID) >>
324 			DYNAMIC_MAC_FID_S;
325 		*src_port = (data_hi & DYNAMIC_MAC_TABLE_SRC_PORT) >>
326 			DYNAMIC_MAC_SRC_PORT_S;
327 		*timestamp = (data_hi & DYNAMIC_MAC_TABLE_TIMESTAMP) >>
328 			DYNAMIC_MAC_TIMESTAMP_S;
329 
330 		mac_addr[5] = (u8)data_lo;
331 		mac_addr[4] = (u8)(data_lo >> 8);
332 		mac_addr[3] = (u8)(data_lo >> 16);
333 		mac_addr[2] = (u8)(data_lo >> 24);
334 
335 		mac_addr[1] = (u8)data_hi;
336 		mac_addr[0] = (u8)(data_hi >> 8);
337 		rc = 0;
338 	}
339 	mutex_unlock(&dev->alu_mutex);
340 
341 	return rc;
342 }
343 
344 static int ksz8795_r_sta_mac_table(struct ksz_device *dev, u16 addr,
345 				   struct alu_struct *alu)
346 {
347 	u32 data_hi, data_lo;
348 	u64 data;
349 
350 	ksz8795_r_table(dev, TABLE_STATIC_MAC, addr, &data);
351 	data_hi = data >> 32;
352 	data_lo = (u32)data;
353 	if (data_hi & (STATIC_MAC_TABLE_VALID | STATIC_MAC_TABLE_OVERRIDE)) {
354 		alu->mac[5] = (u8)data_lo;
355 		alu->mac[4] = (u8)(data_lo >> 8);
356 		alu->mac[3] = (u8)(data_lo >> 16);
357 		alu->mac[2] = (u8)(data_lo >> 24);
358 		alu->mac[1] = (u8)data_hi;
359 		alu->mac[0] = (u8)(data_hi >> 8);
360 		alu->port_forward = (data_hi & STATIC_MAC_TABLE_FWD_PORTS) >>
361 			STATIC_MAC_FWD_PORTS_S;
362 		alu->is_override =
363 			(data_hi & STATIC_MAC_TABLE_OVERRIDE) ? 1 : 0;
364 		data_hi >>= 1;
365 		alu->is_use_fid = (data_hi & STATIC_MAC_TABLE_USE_FID) ? 1 : 0;
366 		alu->fid = (data_hi & STATIC_MAC_TABLE_FID) >>
367 			STATIC_MAC_FID_S;
368 		return 0;
369 	}
370 	return -ENXIO;
371 }
372 
373 static void ksz8795_w_sta_mac_table(struct ksz_device *dev, u16 addr,
374 				    struct alu_struct *alu)
375 {
376 	u32 data_hi, data_lo;
377 	u64 data;
378 
379 	data_lo = ((u32)alu->mac[2] << 24) |
380 		((u32)alu->mac[3] << 16) |
381 		((u32)alu->mac[4] << 8) | alu->mac[5];
382 	data_hi = ((u32)alu->mac[0] << 8) | alu->mac[1];
383 	data_hi |= (u32)alu->port_forward << STATIC_MAC_FWD_PORTS_S;
384 
385 	if (alu->is_override)
386 		data_hi |= STATIC_MAC_TABLE_OVERRIDE;
387 	if (alu->is_use_fid) {
388 		data_hi |= STATIC_MAC_TABLE_USE_FID;
389 		data_hi |= (u32)alu->fid << STATIC_MAC_FID_S;
390 	}
391 	if (alu->is_static)
392 		data_hi |= STATIC_MAC_TABLE_VALID;
393 	else
394 		data_hi &= ~STATIC_MAC_TABLE_OVERRIDE;
395 
396 	data = (u64)data_hi << 32 | data_lo;
397 	ksz8795_w_table(dev, TABLE_STATIC_MAC, addr, data);
398 }
399 
400 static void ksz8795_from_vlan(u16 vlan, u8 *fid, u8 *member, u8 *valid)
401 {
402 	*fid = vlan & VLAN_TABLE_FID;
403 	*member = (vlan & VLAN_TABLE_MEMBERSHIP) >> VLAN_TABLE_MEMBERSHIP_S;
404 	*valid = !!(vlan & VLAN_TABLE_VALID);
405 }
406 
407 static void ksz8795_to_vlan(u8 fid, u8 member, u8 valid, u16 *vlan)
408 {
409 	*vlan = fid;
410 	*vlan |= (u16)member << VLAN_TABLE_MEMBERSHIP_S;
411 	if (valid)
412 		*vlan |= VLAN_TABLE_VALID;
413 }
414 
415 static void ksz8795_r_vlan_entries(struct ksz_device *dev, u16 addr)
416 {
417 	u64 data;
418 	int i;
419 
420 	ksz8795_r_table(dev, TABLE_VLAN, addr, &data);
421 	addr *= 4;
422 	for (i = 0; i < 4; i++) {
423 		dev->vlan_cache[addr + i].table[0] = (u16)data;
424 		data >>= VLAN_TABLE_S;
425 	}
426 }
427 
428 static void ksz8795_r_vlan_table(struct ksz_device *dev, u16 vid, u16 *vlan)
429 {
430 	int index;
431 	u16 *data;
432 	u16 addr;
433 	u64 buf;
434 
435 	data = (u16 *)&buf;
436 	addr = vid / 4;
437 	index = vid & 3;
438 	ksz8795_r_table(dev, TABLE_VLAN, addr, &buf);
439 	*vlan = data[index];
440 }
441 
442 static void ksz8795_w_vlan_table(struct ksz_device *dev, u16 vid, u16 vlan)
443 {
444 	int index;
445 	u16 *data;
446 	u16 addr;
447 	u64 buf;
448 
449 	data = (u16 *)&buf;
450 	addr = vid / 4;
451 	index = vid & 3;
452 	ksz8795_r_table(dev, TABLE_VLAN, addr, &buf);
453 	data[index] = vlan;
454 	dev->vlan_cache[vid].table[0] = vlan;
455 	ksz8795_w_table(dev, TABLE_VLAN, addr, buf);
456 }
457 
458 static void ksz8795_r_phy(struct ksz_device *dev, u16 phy, u16 reg, u16 *val)
459 {
460 	u8 restart, speed, ctrl, link;
461 	int processed = true;
462 	u16 data = 0;
463 	u8 p = phy;
464 
465 	switch (reg) {
466 	case PHY_REG_CTRL:
467 		ksz_pread8(dev, p, P_NEG_RESTART_CTRL, &restart);
468 		ksz_pread8(dev, p, P_SPEED_STATUS, &speed);
469 		ksz_pread8(dev, p, P_FORCE_CTRL, &ctrl);
470 		if (restart & PORT_PHY_LOOPBACK)
471 			data |= PHY_LOOPBACK;
472 		if (ctrl & PORT_FORCE_100_MBIT)
473 			data |= PHY_SPEED_100MBIT;
474 		if (!(ctrl & PORT_AUTO_NEG_DISABLE))
475 			data |= PHY_AUTO_NEG_ENABLE;
476 		if (restart & PORT_POWER_DOWN)
477 			data |= PHY_POWER_DOWN;
478 		if (restart & PORT_AUTO_NEG_RESTART)
479 			data |= PHY_AUTO_NEG_RESTART;
480 		if (ctrl & PORT_FORCE_FULL_DUPLEX)
481 			data |= PHY_FULL_DUPLEX;
482 		if (speed & PORT_HP_MDIX)
483 			data |= PHY_HP_MDIX;
484 		if (restart & PORT_FORCE_MDIX)
485 			data |= PHY_FORCE_MDIX;
486 		if (restart & PORT_AUTO_MDIX_DISABLE)
487 			data |= PHY_AUTO_MDIX_DISABLE;
488 		if (restart & PORT_TX_DISABLE)
489 			data |= PHY_TRANSMIT_DISABLE;
490 		if (restart & PORT_LED_OFF)
491 			data |= PHY_LED_DISABLE;
492 		break;
493 	case PHY_REG_STATUS:
494 		ksz_pread8(dev, p, P_LINK_STATUS, &link);
495 		data = PHY_100BTX_FD_CAPABLE |
496 		       PHY_100BTX_CAPABLE |
497 		       PHY_10BT_FD_CAPABLE |
498 		       PHY_10BT_CAPABLE |
499 		       PHY_AUTO_NEG_CAPABLE;
500 		if (link & PORT_AUTO_NEG_COMPLETE)
501 			data |= PHY_AUTO_NEG_ACKNOWLEDGE;
502 		if (link & PORT_STAT_LINK_GOOD)
503 			data |= PHY_LINK_STATUS;
504 		break;
505 	case PHY_REG_ID_1:
506 		data = KSZ8795_ID_HI;
507 		break;
508 	case PHY_REG_ID_2:
509 		data = KSZ8795_ID_LO;
510 		break;
511 	case PHY_REG_AUTO_NEGOTIATION:
512 		ksz_pread8(dev, p, P_LOCAL_CTRL, &ctrl);
513 		data = PHY_AUTO_NEG_802_3;
514 		if (ctrl & PORT_AUTO_NEG_SYM_PAUSE)
515 			data |= PHY_AUTO_NEG_SYM_PAUSE;
516 		if (ctrl & PORT_AUTO_NEG_100BTX_FD)
517 			data |= PHY_AUTO_NEG_100BTX_FD;
518 		if (ctrl & PORT_AUTO_NEG_100BTX)
519 			data |= PHY_AUTO_NEG_100BTX;
520 		if (ctrl & PORT_AUTO_NEG_10BT_FD)
521 			data |= PHY_AUTO_NEG_10BT_FD;
522 		if (ctrl & PORT_AUTO_NEG_10BT)
523 			data |= PHY_AUTO_NEG_10BT;
524 		break;
525 	case PHY_REG_REMOTE_CAPABILITY:
526 		ksz_pread8(dev, p, P_REMOTE_STATUS, &link);
527 		data = PHY_AUTO_NEG_802_3;
528 		if (link & PORT_REMOTE_SYM_PAUSE)
529 			data |= PHY_AUTO_NEG_SYM_PAUSE;
530 		if (link & PORT_REMOTE_100BTX_FD)
531 			data |= PHY_AUTO_NEG_100BTX_FD;
532 		if (link & PORT_REMOTE_100BTX)
533 			data |= PHY_AUTO_NEG_100BTX;
534 		if (link & PORT_REMOTE_10BT_FD)
535 			data |= PHY_AUTO_NEG_10BT_FD;
536 		if (link & PORT_REMOTE_10BT)
537 			data |= PHY_AUTO_NEG_10BT;
538 		if (data & ~PHY_AUTO_NEG_802_3)
539 			data |= PHY_REMOTE_ACKNOWLEDGE_NOT;
540 		break;
541 	default:
542 		processed = false;
543 		break;
544 	}
545 	if (processed)
546 		*val = data;
547 }
548 
549 static void ksz8795_w_phy(struct ksz_device *dev, u16 phy, u16 reg, u16 val)
550 {
551 	u8 p = phy;
552 	u8 restart, speed, ctrl, data;
553 
554 	switch (reg) {
555 	case PHY_REG_CTRL:
556 
557 		/* Do not support PHY reset function. */
558 		if (val & PHY_RESET)
559 			break;
560 		ksz_pread8(dev, p, P_SPEED_STATUS, &speed);
561 		data = speed;
562 		if (val & PHY_HP_MDIX)
563 			data |= PORT_HP_MDIX;
564 		else
565 			data &= ~PORT_HP_MDIX;
566 		if (data != speed)
567 			ksz_pwrite8(dev, p, P_SPEED_STATUS, data);
568 		ksz_pread8(dev, p, P_FORCE_CTRL, &ctrl);
569 		data = ctrl;
570 		if (!(val & PHY_AUTO_NEG_ENABLE))
571 			data |= PORT_AUTO_NEG_DISABLE;
572 		else
573 			data &= ~PORT_AUTO_NEG_DISABLE;
574 
575 		/* Fiber port does not support auto-negotiation. */
576 		if (dev->ports[p].fiber)
577 			data |= PORT_AUTO_NEG_DISABLE;
578 		if (val & PHY_SPEED_100MBIT)
579 			data |= PORT_FORCE_100_MBIT;
580 		else
581 			data &= ~PORT_FORCE_100_MBIT;
582 		if (val & PHY_FULL_DUPLEX)
583 			data |= PORT_FORCE_FULL_DUPLEX;
584 		else
585 			data &= ~PORT_FORCE_FULL_DUPLEX;
586 		if (data != ctrl)
587 			ksz_pwrite8(dev, p, P_FORCE_CTRL, data);
588 		ksz_pread8(dev, p, P_NEG_RESTART_CTRL, &restart);
589 		data = restart;
590 		if (val & PHY_LED_DISABLE)
591 			data |= PORT_LED_OFF;
592 		else
593 			data &= ~PORT_LED_OFF;
594 		if (val & PHY_TRANSMIT_DISABLE)
595 			data |= PORT_TX_DISABLE;
596 		else
597 			data &= ~PORT_TX_DISABLE;
598 		if (val & PHY_AUTO_NEG_RESTART)
599 			data |= PORT_AUTO_NEG_RESTART;
600 		else
601 			data &= ~(PORT_AUTO_NEG_RESTART);
602 		if (val & PHY_POWER_DOWN)
603 			data |= PORT_POWER_DOWN;
604 		else
605 			data &= ~PORT_POWER_DOWN;
606 		if (val & PHY_AUTO_MDIX_DISABLE)
607 			data |= PORT_AUTO_MDIX_DISABLE;
608 		else
609 			data &= ~PORT_AUTO_MDIX_DISABLE;
610 		if (val & PHY_FORCE_MDIX)
611 			data |= PORT_FORCE_MDIX;
612 		else
613 			data &= ~PORT_FORCE_MDIX;
614 		if (val & PHY_LOOPBACK)
615 			data |= PORT_PHY_LOOPBACK;
616 		else
617 			data &= ~PORT_PHY_LOOPBACK;
618 		if (data != restart)
619 			ksz_pwrite8(dev, p, P_NEG_RESTART_CTRL, data);
620 		break;
621 	case PHY_REG_AUTO_NEGOTIATION:
622 		ksz_pread8(dev, p, P_LOCAL_CTRL, &ctrl);
623 		data = ctrl;
624 		data &= ~(PORT_AUTO_NEG_SYM_PAUSE |
625 			  PORT_AUTO_NEG_100BTX_FD |
626 			  PORT_AUTO_NEG_100BTX |
627 			  PORT_AUTO_NEG_10BT_FD |
628 			  PORT_AUTO_NEG_10BT);
629 		if (val & PHY_AUTO_NEG_SYM_PAUSE)
630 			data |= PORT_AUTO_NEG_SYM_PAUSE;
631 		if (val & PHY_AUTO_NEG_100BTX_FD)
632 			data |= PORT_AUTO_NEG_100BTX_FD;
633 		if (val & PHY_AUTO_NEG_100BTX)
634 			data |= PORT_AUTO_NEG_100BTX;
635 		if (val & PHY_AUTO_NEG_10BT_FD)
636 			data |= PORT_AUTO_NEG_10BT_FD;
637 		if (val & PHY_AUTO_NEG_10BT)
638 			data |= PORT_AUTO_NEG_10BT;
639 		if (data != ctrl)
640 			ksz_pwrite8(dev, p, P_LOCAL_CTRL, data);
641 		break;
642 	default:
643 		break;
644 	}
645 }
646 
647 static enum dsa_tag_protocol ksz8795_get_tag_protocol(struct dsa_switch *ds,
648 						      int port)
649 {
650 	return DSA_TAG_PROTO_KSZ8795;
651 }
652 
653 static void ksz8795_get_strings(struct dsa_switch *ds, int port,
654 				u32 stringset, uint8_t *buf)
655 {
656 	int i;
657 
658 	for (i = 0; i < TOTAL_SWITCH_COUNTER_NUM; i++) {
659 		memcpy(buf + i * ETH_GSTRING_LEN, mib_names[i].string,
660 		       ETH_GSTRING_LEN);
661 	}
662 }
663 
664 static void ksz8795_cfg_port_member(struct ksz_device *dev, int port,
665 				    u8 member)
666 {
667 	u8 data;
668 
669 	ksz_pread8(dev, port, P_MIRROR_CTRL, &data);
670 	data &= ~PORT_VLAN_MEMBERSHIP;
671 	data |= (member & dev->port_mask);
672 	ksz_pwrite8(dev, port, P_MIRROR_CTRL, data);
673 	dev->ports[port].member = member;
674 }
675 
676 static void ksz8795_port_stp_state_set(struct dsa_switch *ds, int port,
677 				       u8 state)
678 {
679 	struct ksz_device *dev = ds->priv;
680 	int forward = dev->member;
681 	struct ksz_port *p;
682 	int member = -1;
683 	u8 data;
684 
685 	p = &dev->ports[port];
686 
687 	ksz_pread8(dev, port, P_STP_CTRL, &data);
688 	data &= ~(PORT_TX_ENABLE | PORT_RX_ENABLE | PORT_LEARN_DISABLE);
689 
690 	switch (state) {
691 	case BR_STATE_DISABLED:
692 		data |= PORT_LEARN_DISABLE;
693 		if (port < SWITCH_PORT_NUM)
694 			member = 0;
695 		break;
696 	case BR_STATE_LISTENING:
697 		data |= (PORT_RX_ENABLE | PORT_LEARN_DISABLE);
698 		if (port < SWITCH_PORT_NUM &&
699 		    p->stp_state == BR_STATE_DISABLED)
700 			member = dev->host_mask | p->vid_member;
701 		break;
702 	case BR_STATE_LEARNING:
703 		data |= PORT_RX_ENABLE;
704 		break;
705 	case BR_STATE_FORWARDING:
706 		data |= (PORT_TX_ENABLE | PORT_RX_ENABLE);
707 
708 		/* This function is also used internally. */
709 		if (port == dev->cpu_port)
710 			break;
711 
712 		/* Port is a member of a bridge. */
713 		if (dev->br_member & BIT(port)) {
714 			dev->member |= BIT(port);
715 			member = dev->member;
716 		} else {
717 			member = dev->host_mask | p->vid_member;
718 		}
719 		break;
720 	case BR_STATE_BLOCKING:
721 		data |= PORT_LEARN_DISABLE;
722 		if (port < SWITCH_PORT_NUM &&
723 		    p->stp_state == BR_STATE_DISABLED)
724 			member = dev->host_mask | p->vid_member;
725 		break;
726 	default:
727 		dev_err(ds->dev, "invalid STP state: %d\n", state);
728 		return;
729 	}
730 
731 	ksz_pwrite8(dev, port, P_STP_CTRL, data);
732 	p->stp_state = state;
733 	if (data & PORT_RX_ENABLE)
734 		dev->rx_ports |= BIT(port);
735 	else
736 		dev->rx_ports &= ~BIT(port);
737 	if (data & PORT_TX_ENABLE)
738 		dev->tx_ports |= BIT(port);
739 	else
740 		dev->tx_ports &= ~BIT(port);
741 
742 	/* Port membership may share register with STP state. */
743 	if (member >= 0 && member != p->member)
744 		ksz8795_cfg_port_member(dev, port, (u8)member);
745 
746 	/* Check if forwarding needs to be updated. */
747 	if (state != BR_STATE_FORWARDING) {
748 		if (dev->br_member & BIT(port))
749 			dev->member &= ~BIT(port);
750 	}
751 
752 	/* When topology has changed the function ksz_update_port_member
753 	 * should be called to modify port forwarding behavior.
754 	 */
755 	if (forward != dev->member)
756 		ksz_update_port_member(dev, port);
757 }
758 
759 static void ksz8795_flush_dyn_mac_table(struct ksz_device *dev, int port)
760 {
761 	u8 learn[TOTAL_PORT_NUM];
762 	int first, index, cnt;
763 	struct ksz_port *p;
764 
765 	if ((uint)port < TOTAL_PORT_NUM) {
766 		first = port;
767 		cnt = port + 1;
768 	} else {
769 		/* Flush all ports. */
770 		first = 0;
771 		cnt = dev->mib_port_cnt;
772 	}
773 	for (index = first; index < cnt; index++) {
774 		p = &dev->ports[index];
775 		if (!p->on)
776 			continue;
777 		ksz_pread8(dev, index, P_STP_CTRL, &learn[index]);
778 		if (!(learn[index] & PORT_LEARN_DISABLE))
779 			ksz_pwrite8(dev, index, P_STP_CTRL,
780 				    learn[index] | PORT_LEARN_DISABLE);
781 	}
782 	ksz_cfg(dev, S_FLUSH_TABLE_CTRL, SW_FLUSH_DYN_MAC_TABLE, true);
783 	for (index = first; index < cnt; index++) {
784 		p = &dev->ports[index];
785 		if (!p->on)
786 			continue;
787 		if (!(learn[index] & PORT_LEARN_DISABLE))
788 			ksz_pwrite8(dev, index, P_STP_CTRL, learn[index]);
789 	}
790 }
791 
792 static int ksz8795_port_vlan_filtering(struct dsa_switch *ds, int port,
793 				       bool flag)
794 {
795 	struct ksz_device *dev = ds->priv;
796 
797 	ksz_cfg(dev, S_MIRROR_CTRL, SW_VLAN_ENABLE, flag);
798 
799 	return 0;
800 }
801 
802 static void ksz8795_port_vlan_add(struct dsa_switch *ds, int port,
803 				  const struct switchdev_obj_port_vlan *vlan)
804 {
805 	bool untagged = vlan->flags & BRIDGE_VLAN_INFO_UNTAGGED;
806 	struct ksz_device *dev = ds->priv;
807 	u16 data, vid, new_pvid = 0;
808 	u8 fid, member, valid;
809 
810 	ksz_port_cfg(dev, port, P_TAG_CTRL, PORT_REMOVE_TAG, untagged);
811 
812 	for (vid = vlan->vid_begin; vid <= vlan->vid_end; vid++) {
813 		ksz8795_r_vlan_table(dev, vid, &data);
814 		ksz8795_from_vlan(data, &fid, &member, &valid);
815 
816 		/* First time to setup the VLAN entry. */
817 		if (!valid) {
818 			/* Need to find a way to map VID to FID. */
819 			fid = 1;
820 			valid = 1;
821 		}
822 		member |= BIT(port);
823 
824 		ksz8795_to_vlan(fid, member, valid, &data);
825 		ksz8795_w_vlan_table(dev, vid, data);
826 
827 		/* change PVID */
828 		if (vlan->flags & BRIDGE_VLAN_INFO_PVID)
829 			new_pvid = vid;
830 	}
831 
832 	if (new_pvid) {
833 		ksz_pread16(dev, port, REG_PORT_CTRL_VID, &vid);
834 		vid &= 0xfff;
835 		vid |= new_pvid;
836 		ksz_pwrite16(dev, port, REG_PORT_CTRL_VID, vid);
837 	}
838 }
839 
840 static int ksz8795_port_vlan_del(struct dsa_switch *ds, int port,
841 				 const struct switchdev_obj_port_vlan *vlan)
842 {
843 	bool untagged = vlan->flags & BRIDGE_VLAN_INFO_UNTAGGED;
844 	struct ksz_device *dev = ds->priv;
845 	u16 data, vid, pvid, new_pvid = 0;
846 	u8 fid, member, valid;
847 
848 	ksz_pread16(dev, port, REG_PORT_CTRL_VID, &pvid);
849 	pvid = pvid & 0xFFF;
850 
851 	ksz_port_cfg(dev, port, P_TAG_CTRL, PORT_REMOVE_TAG, untagged);
852 
853 	for (vid = vlan->vid_begin; vid <= vlan->vid_end; vid++) {
854 		ksz8795_r_vlan_table(dev, vid, &data);
855 		ksz8795_from_vlan(data, &fid, &member, &valid);
856 
857 		member &= ~BIT(port);
858 
859 		/* Invalidate the entry if no more member. */
860 		if (!member) {
861 			fid = 0;
862 			valid = 0;
863 		}
864 
865 		if (pvid == vid)
866 			new_pvid = 1;
867 
868 		ksz8795_to_vlan(fid, member, valid, &data);
869 		ksz8795_w_vlan_table(dev, vid, data);
870 	}
871 
872 	if (new_pvid != pvid)
873 		ksz_pwrite16(dev, port, REG_PORT_CTRL_VID, pvid);
874 
875 	return 0;
876 }
877 
878 static int ksz8795_port_mirror_add(struct dsa_switch *ds, int port,
879 				   struct dsa_mall_mirror_tc_entry *mirror,
880 				   bool ingress)
881 {
882 	struct ksz_device *dev = ds->priv;
883 
884 	if (ingress) {
885 		ksz_port_cfg(dev, port, P_MIRROR_CTRL, PORT_MIRROR_RX, true);
886 		dev->mirror_rx |= BIT(port);
887 	} else {
888 		ksz_port_cfg(dev, port, P_MIRROR_CTRL, PORT_MIRROR_TX, true);
889 		dev->mirror_tx |= BIT(port);
890 	}
891 
892 	ksz_port_cfg(dev, port, P_MIRROR_CTRL, PORT_MIRROR_SNIFFER, false);
893 
894 	/* configure mirror port */
895 	if (dev->mirror_rx || dev->mirror_tx)
896 		ksz_port_cfg(dev, mirror->to_local_port, P_MIRROR_CTRL,
897 			     PORT_MIRROR_SNIFFER, true);
898 
899 	return 0;
900 }
901 
902 static void ksz8795_port_mirror_del(struct dsa_switch *ds, int port,
903 				    struct dsa_mall_mirror_tc_entry *mirror)
904 {
905 	struct ksz_device *dev = ds->priv;
906 	u8 data;
907 
908 	if (mirror->ingress) {
909 		ksz_port_cfg(dev, port, P_MIRROR_CTRL, PORT_MIRROR_RX, false);
910 		dev->mirror_rx &= ~BIT(port);
911 	} else {
912 		ksz_port_cfg(dev, port, P_MIRROR_CTRL, PORT_MIRROR_TX, false);
913 		dev->mirror_tx &= ~BIT(port);
914 	}
915 
916 	ksz_pread8(dev, port, P_MIRROR_CTRL, &data);
917 
918 	if (!dev->mirror_rx && !dev->mirror_tx)
919 		ksz_port_cfg(dev, mirror->to_local_port, P_MIRROR_CTRL,
920 			     PORT_MIRROR_SNIFFER, false);
921 }
922 
923 static void ksz8795_port_setup(struct ksz_device *dev, int port, bool cpu_port)
924 {
925 	struct ksz_port *p = &dev->ports[port];
926 	u8 data8, member;
927 
928 	/* enable broadcast storm limit */
929 	ksz_port_cfg(dev, port, P_BCAST_STORM_CTRL, PORT_BROADCAST_STORM, true);
930 
931 	ksz8795_set_prio_queue(dev, port, 4);
932 
933 	/* disable DiffServ priority */
934 	ksz_port_cfg(dev, port, P_PRIO_CTRL, PORT_DIFFSERV_ENABLE, false);
935 
936 	/* replace priority */
937 	ksz_port_cfg(dev, port, P_802_1P_CTRL, PORT_802_1P_REMAPPING, false);
938 
939 	/* enable 802.1p priority */
940 	ksz_port_cfg(dev, port, P_PRIO_CTRL, PORT_802_1P_ENABLE, true);
941 
942 	if (cpu_port) {
943 		/* Configure MII interface for proper network communication. */
944 		ksz_read8(dev, REG_PORT_5_CTRL_6, &data8);
945 		data8 &= ~PORT_INTERFACE_TYPE;
946 		data8 &= ~PORT_GMII_1GPS_MODE;
947 		switch (dev->interface) {
948 		case PHY_INTERFACE_MODE_MII:
949 			p->phydev.speed = SPEED_100;
950 			break;
951 		case PHY_INTERFACE_MODE_RMII:
952 			data8 |= PORT_INTERFACE_RMII;
953 			p->phydev.speed = SPEED_100;
954 			break;
955 		case PHY_INTERFACE_MODE_GMII:
956 			data8 |= PORT_GMII_1GPS_MODE;
957 			data8 |= PORT_INTERFACE_GMII;
958 			p->phydev.speed = SPEED_1000;
959 			break;
960 		default:
961 			data8 &= ~PORT_RGMII_ID_IN_ENABLE;
962 			data8 &= ~PORT_RGMII_ID_OUT_ENABLE;
963 			if (dev->interface == PHY_INTERFACE_MODE_RGMII_ID ||
964 			    dev->interface == PHY_INTERFACE_MODE_RGMII_RXID)
965 				data8 |= PORT_RGMII_ID_IN_ENABLE;
966 			if (dev->interface == PHY_INTERFACE_MODE_RGMII_ID ||
967 			    dev->interface == PHY_INTERFACE_MODE_RGMII_TXID)
968 				data8 |= PORT_RGMII_ID_OUT_ENABLE;
969 			data8 |= PORT_GMII_1GPS_MODE;
970 			data8 |= PORT_INTERFACE_RGMII;
971 			p->phydev.speed = SPEED_1000;
972 			break;
973 		}
974 		ksz_write8(dev, REG_PORT_5_CTRL_6, data8);
975 		p->phydev.duplex = 1;
976 
977 		member = dev->port_mask;
978 		dev->on_ports = dev->host_mask;
979 		dev->live_ports = dev->host_mask;
980 	} else {
981 		member = dev->host_mask | p->vid_member;
982 		dev->on_ports |= BIT(port);
983 
984 		/* Link was detected before port is enabled. */
985 		if (p->phydev.link)
986 			dev->live_ports |= BIT(port);
987 	}
988 	ksz8795_cfg_port_member(dev, port, member);
989 }
990 
991 static void ksz8795_config_cpu_port(struct dsa_switch *ds)
992 {
993 	struct ksz_device *dev = ds->priv;
994 	struct ksz_port *p;
995 	u8 remote;
996 	int i;
997 
998 	ds->num_ports = dev->port_cnt + 1;
999 
1000 	/* Switch marks the maximum frame with extra byte as oversize. */
1001 	ksz_cfg(dev, REG_SW_CTRL_2, SW_LEGAL_PACKET_DISABLE, true);
1002 	ksz_cfg(dev, S_TAIL_TAG_CTRL, SW_TAIL_TAG_ENABLE, true);
1003 
1004 	p = &dev->ports[dev->cpu_port];
1005 	p->vid_member = dev->port_mask;
1006 	p->on = 1;
1007 
1008 	ksz8795_port_setup(dev, dev->cpu_port, true);
1009 	dev->member = dev->host_mask;
1010 
1011 	for (i = 0; i < SWITCH_PORT_NUM; i++) {
1012 		p = &dev->ports[i];
1013 
1014 		/* Initialize to non-zero so that ksz_cfg_port_member() will
1015 		 * be called.
1016 		 */
1017 		p->vid_member = BIT(i);
1018 		p->member = dev->port_mask;
1019 		ksz8795_port_stp_state_set(ds, i, BR_STATE_DISABLED);
1020 
1021 		/* Last port may be disabled. */
1022 		if (i == dev->port_cnt)
1023 			break;
1024 		p->on = 1;
1025 		p->phy = 1;
1026 	}
1027 	for (i = 0; i < dev->phy_port_cnt; i++) {
1028 		p = &dev->ports[i];
1029 		if (!p->on)
1030 			continue;
1031 		ksz_pread8(dev, i, P_REMOTE_STATUS, &remote);
1032 		if (remote & PORT_FIBER_MODE)
1033 			p->fiber = 1;
1034 		if (p->fiber)
1035 			ksz_port_cfg(dev, i, P_STP_CTRL, PORT_FORCE_FLOW_CTRL,
1036 				     true);
1037 		else
1038 			ksz_port_cfg(dev, i, P_STP_CTRL, PORT_FORCE_FLOW_CTRL,
1039 				     false);
1040 	}
1041 }
1042 
1043 static int ksz8795_setup(struct dsa_switch *ds)
1044 {
1045 	struct ksz_device *dev = ds->priv;
1046 	struct alu_struct alu;
1047 	int i, ret = 0;
1048 
1049 	dev->vlan_cache = devm_kcalloc(dev->dev, sizeof(struct vlan_table),
1050 				       dev->num_vlans, GFP_KERNEL);
1051 	if (!dev->vlan_cache)
1052 		return -ENOMEM;
1053 
1054 	ret = ksz8795_reset_switch(dev);
1055 	if (ret) {
1056 		dev_err(ds->dev, "failed to reset switch\n");
1057 		return ret;
1058 	}
1059 
1060 	ksz_cfg(dev, S_REPLACE_VID_CTRL, SW_FLOW_CTRL, true);
1061 
1062 	/* Enable automatic fast aging when link changed detected. */
1063 	ksz_cfg(dev, S_LINK_AGING_CTRL, SW_LINK_AUTO_AGING, true);
1064 
1065 	/* Enable aggressive back off algorithm in half duplex mode. */
1066 	regmap_update_bits(dev->regmap[0], REG_SW_CTRL_1,
1067 			   SW_AGGR_BACKOFF, SW_AGGR_BACKOFF);
1068 
1069 	/*
1070 	 * Make sure unicast VLAN boundary is set as default and
1071 	 * enable no excessive collision drop.
1072 	 */
1073 	regmap_update_bits(dev->regmap[0], REG_SW_CTRL_2,
1074 			   UNICAST_VLAN_BOUNDARY | NO_EXC_COLLISION_DROP,
1075 			   UNICAST_VLAN_BOUNDARY | NO_EXC_COLLISION_DROP);
1076 
1077 	ksz8795_config_cpu_port(ds);
1078 
1079 	ksz_cfg(dev, REG_SW_CTRL_2, MULTICAST_STORM_DISABLE, true);
1080 
1081 	ksz_cfg(dev, S_REPLACE_VID_CTRL, SW_REPLACE_VID, false);
1082 
1083 	ksz_cfg(dev, S_MIRROR_CTRL, SW_MIRROR_RX_TX, false);
1084 
1085 	/* set broadcast storm protection 10% rate */
1086 	regmap_update_bits(dev->regmap[1], S_REPLACE_VID_CTRL,
1087 			   BROADCAST_STORM_RATE,
1088 			   (BROADCAST_STORM_VALUE *
1089 			   BROADCAST_STORM_PROT_RATE) / 100);
1090 
1091 	for (i = 0; i < VLAN_TABLE_ENTRIES; i++)
1092 		ksz8795_r_vlan_entries(dev, i);
1093 
1094 	/* Setup STP address for STP operation. */
1095 	memset(&alu, 0, sizeof(alu));
1096 	ether_addr_copy(alu.mac, eth_stp_addr);
1097 	alu.is_static = true;
1098 	alu.is_override = true;
1099 	alu.port_forward = dev->host_mask;
1100 
1101 	ksz8795_w_sta_mac_table(dev, 0, &alu);
1102 
1103 	ksz_init_mib_timer(dev);
1104 
1105 	return 0;
1106 }
1107 
1108 static const struct dsa_switch_ops ksz8795_switch_ops = {
1109 	.get_tag_protocol	= ksz8795_get_tag_protocol,
1110 	.setup			= ksz8795_setup,
1111 	.phy_read		= ksz_phy_read16,
1112 	.phy_write		= ksz_phy_write16,
1113 	.adjust_link		= ksz_adjust_link,
1114 	.port_enable		= ksz_enable_port,
1115 	.port_disable		= ksz_disable_port,
1116 	.get_strings		= ksz8795_get_strings,
1117 	.get_ethtool_stats	= ksz_get_ethtool_stats,
1118 	.get_sset_count		= ksz_sset_count,
1119 	.port_bridge_join	= ksz_port_bridge_join,
1120 	.port_bridge_leave	= ksz_port_bridge_leave,
1121 	.port_stp_state_set	= ksz8795_port_stp_state_set,
1122 	.port_fast_age		= ksz_port_fast_age,
1123 	.port_vlan_filtering	= ksz8795_port_vlan_filtering,
1124 	.port_vlan_prepare	= ksz_port_vlan_prepare,
1125 	.port_vlan_add		= ksz8795_port_vlan_add,
1126 	.port_vlan_del		= ksz8795_port_vlan_del,
1127 	.port_fdb_dump		= ksz_port_fdb_dump,
1128 	.port_mdb_prepare       = ksz_port_mdb_prepare,
1129 	.port_mdb_add           = ksz_port_mdb_add,
1130 	.port_mdb_del           = ksz_port_mdb_del,
1131 	.port_mirror_add	= ksz8795_port_mirror_add,
1132 	.port_mirror_del	= ksz8795_port_mirror_del,
1133 };
1134 
1135 static u32 ksz8795_get_port_addr(int port, int offset)
1136 {
1137 	return PORT_CTRL_ADDR(port, offset);
1138 }
1139 
1140 static int ksz8795_switch_detect(struct ksz_device *dev)
1141 {
1142 	u8 id1, id2;
1143 	u16 id16;
1144 	int ret;
1145 
1146 	/* read chip id */
1147 	ret = ksz_read16(dev, REG_CHIP_ID0, &id16);
1148 	if (ret)
1149 		return ret;
1150 
1151 	id1 = id16 >> 8;
1152 	id2 = id16 & SW_CHIP_ID_M;
1153 	if (id1 != FAMILY_ID ||
1154 	    (id2 != CHIP_ID_94 && id2 != CHIP_ID_95))
1155 		return -ENODEV;
1156 
1157 	dev->mib_port_cnt = TOTAL_PORT_NUM;
1158 	dev->phy_port_cnt = SWITCH_PORT_NUM;
1159 	dev->port_cnt = SWITCH_PORT_NUM;
1160 
1161 	if (id2 == CHIP_ID_95) {
1162 		u8 val;
1163 
1164 		id2 = 0x95;
1165 		ksz_read8(dev, REG_PORT_1_STATUS_0, &val);
1166 		if (val & PORT_FIBER_MODE)
1167 			id2 = 0x65;
1168 	} else if (id2 == CHIP_ID_94) {
1169 		dev->port_cnt--;
1170 		dev->last_port = dev->port_cnt;
1171 		id2 = 0x94;
1172 	}
1173 	id16 &= ~0xff;
1174 	id16 |= id2;
1175 	dev->chip_id = id16;
1176 
1177 	dev->cpu_port = dev->mib_port_cnt - 1;
1178 	dev->host_mask = BIT(dev->cpu_port);
1179 
1180 	return 0;
1181 }
1182 
1183 struct ksz_chip_data {
1184 	u16 chip_id;
1185 	const char *dev_name;
1186 	int num_vlans;
1187 	int num_alus;
1188 	int num_statics;
1189 	int cpu_ports;
1190 	int port_cnt;
1191 };
1192 
1193 static const struct ksz_chip_data ksz8795_switch_chips[] = {
1194 	{
1195 		.chip_id = 0x8795,
1196 		.dev_name = "KSZ8795",
1197 		.num_vlans = 4096,
1198 		.num_alus = 0,
1199 		.num_statics = 8,
1200 		.cpu_ports = 0x10,	/* can be configured as cpu port */
1201 		.port_cnt = 4,		/* total physical port count */
1202 	},
1203 	{
1204 		.chip_id = 0x8794,
1205 		.dev_name = "KSZ8794",
1206 		.num_vlans = 4096,
1207 		.num_alus = 0,
1208 		.num_statics = 8,
1209 		.cpu_ports = 0x10,	/* can be configured as cpu port */
1210 		.port_cnt = 3,		/* total physical port count */
1211 	},
1212 	{
1213 		.chip_id = 0x8765,
1214 		.dev_name = "KSZ8765",
1215 		.num_vlans = 4096,
1216 		.num_alus = 0,
1217 		.num_statics = 8,
1218 		.cpu_ports = 0x10,	/* can be configured as cpu port */
1219 		.port_cnt = 4,		/* total physical port count */
1220 	},
1221 };
1222 
1223 static int ksz8795_switch_init(struct ksz_device *dev)
1224 {
1225 	int i;
1226 
1227 	mutex_init(&dev->stats_mutex);
1228 	mutex_init(&dev->alu_mutex);
1229 	mutex_init(&dev->vlan_mutex);
1230 
1231 	dev->ds->ops = &ksz8795_switch_ops;
1232 
1233 	for (i = 0; i < ARRAY_SIZE(ksz8795_switch_chips); i++) {
1234 		const struct ksz_chip_data *chip = &ksz8795_switch_chips[i];
1235 
1236 		if (dev->chip_id == chip->chip_id) {
1237 			dev->name = chip->dev_name;
1238 			dev->num_vlans = chip->num_vlans;
1239 			dev->num_alus = chip->num_alus;
1240 			dev->num_statics = chip->num_statics;
1241 			dev->port_cnt = chip->port_cnt;
1242 			dev->cpu_ports = chip->cpu_ports;
1243 
1244 			break;
1245 		}
1246 	}
1247 
1248 	/* no switch found */
1249 	if (!dev->cpu_ports)
1250 		return -ENODEV;
1251 
1252 	dev->port_mask = BIT(dev->port_cnt) - 1;
1253 	dev->port_mask |= dev->host_mask;
1254 
1255 	dev->reg_mib_cnt = SWITCH_COUNTER_NUM;
1256 	dev->mib_cnt = TOTAL_SWITCH_COUNTER_NUM;
1257 
1258 	i = dev->mib_port_cnt;
1259 	dev->ports = devm_kzalloc(dev->dev, sizeof(struct ksz_port) * i,
1260 				  GFP_KERNEL);
1261 	if (!dev->ports)
1262 		return -ENOMEM;
1263 	for (i = 0; i < dev->mib_port_cnt; i++) {
1264 		mutex_init(&dev->ports[i].mib.cnt_mutex);
1265 		dev->ports[i].mib.counters =
1266 			devm_kzalloc(dev->dev,
1267 				     sizeof(u64) *
1268 				     (TOTAL_SWITCH_COUNTER_NUM + 1),
1269 				     GFP_KERNEL);
1270 		if (!dev->ports[i].mib.counters)
1271 			return -ENOMEM;
1272 	}
1273 
1274 	return 0;
1275 }
1276 
1277 static void ksz8795_switch_exit(struct ksz_device *dev)
1278 {
1279 	ksz8795_reset_switch(dev);
1280 }
1281 
1282 static const struct ksz_dev_ops ksz8795_dev_ops = {
1283 	.get_port_addr = ksz8795_get_port_addr,
1284 	.cfg_port_member = ksz8795_cfg_port_member,
1285 	.flush_dyn_mac_table = ksz8795_flush_dyn_mac_table,
1286 	.port_setup = ksz8795_port_setup,
1287 	.r_phy = ksz8795_r_phy,
1288 	.w_phy = ksz8795_w_phy,
1289 	.r_dyn_mac_table = ksz8795_r_dyn_mac_table,
1290 	.r_sta_mac_table = ksz8795_r_sta_mac_table,
1291 	.w_sta_mac_table = ksz8795_w_sta_mac_table,
1292 	.r_mib_cnt = ksz8795_r_mib_cnt,
1293 	.r_mib_pkt = ksz8795_r_mib_pkt,
1294 	.freeze_mib = ksz8795_freeze_mib,
1295 	.port_init_cnt = ksz8795_port_init_cnt,
1296 	.shutdown = ksz8795_reset_switch,
1297 	.detect = ksz8795_switch_detect,
1298 	.init = ksz8795_switch_init,
1299 	.exit = ksz8795_switch_exit,
1300 };
1301 
1302 int ksz8795_switch_register(struct ksz_device *dev)
1303 {
1304 	return ksz_switch_register(dev, &ksz8795_dev_ops);
1305 }
1306 EXPORT_SYMBOL(ksz8795_switch_register);
1307 
1308 MODULE_AUTHOR("Tristram Ha <Tristram.Ha@microchip.com>");
1309 MODULE_DESCRIPTION("Microchip KSZ8795 Series Switch DSA Driver");
1310 MODULE_LICENSE("GPL");
1311