1 // SPDX-License-Identifier: GPL-2.0 or BSD-3-Clause 2 /* 3 * Northstar Plus switch SerDes/SGMII PHY main logic 4 * 5 * Copyright (C) 2018 Florian Fainelli <f.fainelli@gmail.com> 6 */ 7 8 #define pr_fmt(fmt) KBUILD_MODNAME ": " fmt 9 10 #include <linux/delay.h> 11 #include <linux/kernel.h> 12 #include <linux/phy.h> 13 #include <linux/phylink.h> 14 #include <net/dsa.h> 15 16 #include "b53_priv.h" 17 #include "b53_serdes.h" 18 #include "b53_regs.h" 19 20 static void b53_serdes_write_blk(struct b53_device *dev, u8 offset, u16 block, 21 u16 value) 22 { 23 b53_write16(dev, B53_SERDES_PAGE, B53_SERDES_BLKADDR, block); 24 b53_write16(dev, B53_SERDES_PAGE, offset, value); 25 } 26 27 static u16 b53_serdes_read_blk(struct b53_device *dev, u8 offset, u16 block) 28 { 29 u16 value; 30 31 b53_write16(dev, B53_SERDES_PAGE, B53_SERDES_BLKADDR, block); 32 b53_read16(dev, B53_SERDES_PAGE, offset, &value); 33 34 return value; 35 } 36 37 static void b53_serdes_set_lane(struct b53_device *dev, u8 lane) 38 { 39 if (dev->serdes_lane == lane) 40 return; 41 42 WARN_ON(lane > 1); 43 44 b53_serdes_write_blk(dev, B53_SERDES_LANE, 45 SERDES_XGXSBLK0_BLOCKADDRESS, lane); 46 dev->serdes_lane = lane; 47 } 48 49 static void b53_serdes_write(struct b53_device *dev, u8 lane, 50 u8 offset, u16 block, u16 value) 51 { 52 b53_serdes_set_lane(dev, lane); 53 b53_serdes_write_blk(dev, offset, block, value); 54 } 55 56 static u16 b53_serdes_read(struct b53_device *dev, u8 lane, 57 u8 offset, u16 block) 58 { 59 b53_serdes_set_lane(dev, lane); 60 return b53_serdes_read_blk(dev, offset, block); 61 } 62 63 void b53_serdes_config(struct b53_device *dev, int port, unsigned int mode, 64 const struct phylink_link_state *state) 65 { 66 u8 lane = b53_serdes_map_lane(dev, port); 67 u16 reg; 68 69 if (lane == B53_INVALID_LANE) 70 return; 71 72 reg = b53_serdes_read(dev, lane, B53_SERDES_DIGITAL_CONTROL(1), 73 SERDES_DIGITAL_BLK); 74 if (state->interface == PHY_INTERFACE_MODE_1000BASEX) 75 reg |= FIBER_MODE_1000X; 76 else 77 reg &= ~FIBER_MODE_1000X; 78 b53_serdes_write(dev, lane, B53_SERDES_DIGITAL_CONTROL(1), 79 SERDES_DIGITAL_BLK, reg); 80 } 81 EXPORT_SYMBOL(b53_serdes_config); 82 83 void b53_serdes_an_restart(struct b53_device *dev, int port) 84 { 85 u8 lane = b53_serdes_map_lane(dev, port); 86 u16 reg; 87 88 if (lane == B53_INVALID_LANE) 89 return; 90 91 reg = b53_serdes_read(dev, lane, B53_SERDES_MII_REG(MII_BMCR), 92 SERDES_MII_BLK); 93 reg |= BMCR_ANRESTART; 94 b53_serdes_write(dev, lane, B53_SERDES_MII_REG(MII_BMCR), 95 SERDES_MII_BLK, reg); 96 } 97 EXPORT_SYMBOL(b53_serdes_an_restart); 98 99 int b53_serdes_link_state(struct b53_device *dev, int port, 100 struct phylink_link_state *state) 101 { 102 u8 lane = b53_serdes_map_lane(dev, port); 103 u16 dig, bmsr; 104 105 if (lane == B53_INVALID_LANE) 106 return 1; 107 108 dig = b53_serdes_read(dev, lane, B53_SERDES_DIGITAL_STATUS, 109 SERDES_DIGITAL_BLK); 110 bmsr = b53_serdes_read(dev, lane, B53_SERDES_MII_REG(MII_BMSR), 111 SERDES_MII_BLK); 112 113 switch ((dig >> SPEED_STATUS_SHIFT) & SPEED_STATUS_MASK) { 114 case SPEED_STATUS_10: 115 state->speed = SPEED_10; 116 break; 117 case SPEED_STATUS_100: 118 state->speed = SPEED_100; 119 break; 120 case SPEED_STATUS_1000: 121 state->speed = SPEED_1000; 122 break; 123 default: 124 case SPEED_STATUS_2500: 125 state->speed = SPEED_2500; 126 break; 127 } 128 129 state->duplex = dig & DUPLEX_STATUS ? DUPLEX_FULL : DUPLEX_HALF; 130 state->an_complete = !!(bmsr & BMSR_ANEGCOMPLETE); 131 state->link = !!(dig & LINK_STATUS); 132 if (dig & PAUSE_RESOLUTION_RX_SIDE) 133 state->pause |= MLO_PAUSE_RX; 134 if (dig & PAUSE_RESOLUTION_TX_SIDE) 135 state->pause |= MLO_PAUSE_TX; 136 137 return 0; 138 } 139 EXPORT_SYMBOL(b53_serdes_link_state); 140 141 void b53_serdes_link_set(struct b53_device *dev, int port, unsigned int mode, 142 phy_interface_t interface, bool link_up) 143 { 144 u8 lane = b53_serdes_map_lane(dev, port); 145 u16 reg; 146 147 if (lane == B53_INVALID_LANE) 148 return; 149 150 reg = b53_serdes_read(dev, lane, B53_SERDES_MII_REG(MII_BMCR), 151 SERDES_MII_BLK); 152 if (link_up) 153 reg &= ~BMCR_PDOWN; 154 else 155 reg |= BMCR_PDOWN; 156 b53_serdes_write(dev, lane, B53_SERDES_MII_REG(MII_BMCR), 157 SERDES_MII_BLK, reg); 158 } 159 EXPORT_SYMBOL(b53_serdes_link_set); 160 161 void b53_serdes_phylink_validate(struct b53_device *dev, int port, 162 unsigned long *supported, 163 struct phylink_link_state *state) 164 { 165 u8 lane = b53_serdes_map_lane(dev, port); 166 167 if (lane == B53_INVALID_LANE) 168 return; 169 170 switch (lane) { 171 case 0: 172 phylink_set(supported, 2500baseX_Full); 173 fallthrough; 174 case 1: 175 phylink_set(supported, 1000baseX_Full); 176 break; 177 default: 178 break; 179 } 180 } 181 EXPORT_SYMBOL(b53_serdes_phylink_validate); 182 183 int b53_serdes_init(struct b53_device *dev, int port) 184 { 185 u8 lane = b53_serdes_map_lane(dev, port); 186 u16 id0, msb, lsb; 187 188 if (lane == B53_INVALID_LANE) 189 return -EINVAL; 190 191 id0 = b53_serdes_read(dev, lane, B53_SERDES_ID0, SERDES_ID0); 192 msb = b53_serdes_read(dev, lane, B53_SERDES_MII_REG(MII_PHYSID1), 193 SERDES_MII_BLK); 194 lsb = b53_serdes_read(dev, lane, B53_SERDES_MII_REG(MII_PHYSID2), 195 SERDES_MII_BLK); 196 if (id0 == 0 || id0 == 0xffff) { 197 dev_err(dev->dev, "SerDes not initialized, check settings\n"); 198 return -ENODEV; 199 } 200 201 dev_info(dev->dev, 202 "SerDes lane %d, model: %d, rev %c%d (OUI: 0x%08x)\n", 203 lane, id0 & SERDES_ID0_MODEL_MASK, 204 (id0 >> SERDES_ID0_REV_LETTER_SHIFT) + 0x41, 205 (id0 >> SERDES_ID0_REV_NUM_SHIFT) & SERDES_ID0_REV_NUM_MASK, 206 (u32)msb << 16 | lsb); 207 208 return 0; 209 } 210 EXPORT_SYMBOL(b53_serdes_init); 211 212 MODULE_AUTHOR("Florian Fainelli <f.fainelli@gmail.com>"); 213 MODULE_DESCRIPTION("B53 Switch SerDes driver"); 214 MODULE_LICENSE("Dual BSD/GPL"); 215