xref: /openbmc/linux/drivers/net/dsa/b53/b53_common.c (revision e82c878d)
1 /*
2  * B53 switch driver main logic
3  *
4  * Copyright (C) 2011-2013 Jonas Gorski <jogo@openwrt.org>
5  * Copyright (C) 2016 Florian Fainelli <f.fainelli@gmail.com>
6  *
7  * Permission to use, copy, modify, and/or distribute this software for any
8  * purpose with or without fee is hereby granted, provided that the above
9  * copyright notice and this permission notice appear in all copies.
10  *
11  * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
12  * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
13  * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR
14  * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
15  * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN
16  * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF
17  * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
18  */
19 
20 #define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
21 
22 #include <linux/delay.h>
23 #include <linux/export.h>
24 #include <linux/gpio.h>
25 #include <linux/kernel.h>
26 #include <linux/module.h>
27 #include <linux/platform_data/b53.h>
28 #include <linux/phy.h>
29 #include <linux/phylink.h>
30 #include <linux/etherdevice.h>
31 #include <linux/if_bridge.h>
32 #include <net/dsa.h>
33 
34 #include "b53_regs.h"
35 #include "b53_priv.h"
36 
37 struct b53_mib_desc {
38 	u8 size;
39 	u8 offset;
40 	const char *name;
41 };
42 
43 /* BCM5365 MIB counters */
44 static const struct b53_mib_desc b53_mibs_65[] = {
45 	{ 8, 0x00, "TxOctets" },
46 	{ 4, 0x08, "TxDropPkts" },
47 	{ 4, 0x10, "TxBroadcastPkts" },
48 	{ 4, 0x14, "TxMulticastPkts" },
49 	{ 4, 0x18, "TxUnicastPkts" },
50 	{ 4, 0x1c, "TxCollisions" },
51 	{ 4, 0x20, "TxSingleCollision" },
52 	{ 4, 0x24, "TxMultipleCollision" },
53 	{ 4, 0x28, "TxDeferredTransmit" },
54 	{ 4, 0x2c, "TxLateCollision" },
55 	{ 4, 0x30, "TxExcessiveCollision" },
56 	{ 4, 0x38, "TxPausePkts" },
57 	{ 8, 0x44, "RxOctets" },
58 	{ 4, 0x4c, "RxUndersizePkts" },
59 	{ 4, 0x50, "RxPausePkts" },
60 	{ 4, 0x54, "Pkts64Octets" },
61 	{ 4, 0x58, "Pkts65to127Octets" },
62 	{ 4, 0x5c, "Pkts128to255Octets" },
63 	{ 4, 0x60, "Pkts256to511Octets" },
64 	{ 4, 0x64, "Pkts512to1023Octets" },
65 	{ 4, 0x68, "Pkts1024to1522Octets" },
66 	{ 4, 0x6c, "RxOversizePkts" },
67 	{ 4, 0x70, "RxJabbers" },
68 	{ 4, 0x74, "RxAlignmentErrors" },
69 	{ 4, 0x78, "RxFCSErrors" },
70 	{ 8, 0x7c, "RxGoodOctets" },
71 	{ 4, 0x84, "RxDropPkts" },
72 	{ 4, 0x88, "RxUnicastPkts" },
73 	{ 4, 0x8c, "RxMulticastPkts" },
74 	{ 4, 0x90, "RxBroadcastPkts" },
75 	{ 4, 0x94, "RxSAChanges" },
76 	{ 4, 0x98, "RxFragments" },
77 };
78 
79 #define B53_MIBS_65_SIZE	ARRAY_SIZE(b53_mibs_65)
80 
81 /* BCM63xx MIB counters */
82 static const struct b53_mib_desc b53_mibs_63xx[] = {
83 	{ 8, 0x00, "TxOctets" },
84 	{ 4, 0x08, "TxDropPkts" },
85 	{ 4, 0x0c, "TxQoSPkts" },
86 	{ 4, 0x10, "TxBroadcastPkts" },
87 	{ 4, 0x14, "TxMulticastPkts" },
88 	{ 4, 0x18, "TxUnicastPkts" },
89 	{ 4, 0x1c, "TxCollisions" },
90 	{ 4, 0x20, "TxSingleCollision" },
91 	{ 4, 0x24, "TxMultipleCollision" },
92 	{ 4, 0x28, "TxDeferredTransmit" },
93 	{ 4, 0x2c, "TxLateCollision" },
94 	{ 4, 0x30, "TxExcessiveCollision" },
95 	{ 4, 0x38, "TxPausePkts" },
96 	{ 8, 0x3c, "TxQoSOctets" },
97 	{ 8, 0x44, "RxOctets" },
98 	{ 4, 0x4c, "RxUndersizePkts" },
99 	{ 4, 0x50, "RxPausePkts" },
100 	{ 4, 0x54, "Pkts64Octets" },
101 	{ 4, 0x58, "Pkts65to127Octets" },
102 	{ 4, 0x5c, "Pkts128to255Octets" },
103 	{ 4, 0x60, "Pkts256to511Octets" },
104 	{ 4, 0x64, "Pkts512to1023Octets" },
105 	{ 4, 0x68, "Pkts1024to1522Octets" },
106 	{ 4, 0x6c, "RxOversizePkts" },
107 	{ 4, 0x70, "RxJabbers" },
108 	{ 4, 0x74, "RxAlignmentErrors" },
109 	{ 4, 0x78, "RxFCSErrors" },
110 	{ 8, 0x7c, "RxGoodOctets" },
111 	{ 4, 0x84, "RxDropPkts" },
112 	{ 4, 0x88, "RxUnicastPkts" },
113 	{ 4, 0x8c, "RxMulticastPkts" },
114 	{ 4, 0x90, "RxBroadcastPkts" },
115 	{ 4, 0x94, "RxSAChanges" },
116 	{ 4, 0x98, "RxFragments" },
117 	{ 4, 0xa0, "RxSymbolErrors" },
118 	{ 4, 0xa4, "RxQoSPkts" },
119 	{ 8, 0xa8, "RxQoSOctets" },
120 	{ 4, 0xb0, "Pkts1523to2047Octets" },
121 	{ 4, 0xb4, "Pkts2048to4095Octets" },
122 	{ 4, 0xb8, "Pkts4096to8191Octets" },
123 	{ 4, 0xbc, "Pkts8192to9728Octets" },
124 	{ 4, 0xc0, "RxDiscarded" },
125 };
126 
127 #define B53_MIBS_63XX_SIZE	ARRAY_SIZE(b53_mibs_63xx)
128 
129 /* MIB counters */
130 static const struct b53_mib_desc b53_mibs[] = {
131 	{ 8, 0x00, "TxOctets" },
132 	{ 4, 0x08, "TxDropPkts" },
133 	{ 4, 0x10, "TxBroadcastPkts" },
134 	{ 4, 0x14, "TxMulticastPkts" },
135 	{ 4, 0x18, "TxUnicastPkts" },
136 	{ 4, 0x1c, "TxCollisions" },
137 	{ 4, 0x20, "TxSingleCollision" },
138 	{ 4, 0x24, "TxMultipleCollision" },
139 	{ 4, 0x28, "TxDeferredTransmit" },
140 	{ 4, 0x2c, "TxLateCollision" },
141 	{ 4, 0x30, "TxExcessiveCollision" },
142 	{ 4, 0x38, "TxPausePkts" },
143 	{ 8, 0x50, "RxOctets" },
144 	{ 4, 0x58, "RxUndersizePkts" },
145 	{ 4, 0x5c, "RxPausePkts" },
146 	{ 4, 0x60, "Pkts64Octets" },
147 	{ 4, 0x64, "Pkts65to127Octets" },
148 	{ 4, 0x68, "Pkts128to255Octets" },
149 	{ 4, 0x6c, "Pkts256to511Octets" },
150 	{ 4, 0x70, "Pkts512to1023Octets" },
151 	{ 4, 0x74, "Pkts1024to1522Octets" },
152 	{ 4, 0x78, "RxOversizePkts" },
153 	{ 4, 0x7c, "RxJabbers" },
154 	{ 4, 0x80, "RxAlignmentErrors" },
155 	{ 4, 0x84, "RxFCSErrors" },
156 	{ 8, 0x88, "RxGoodOctets" },
157 	{ 4, 0x90, "RxDropPkts" },
158 	{ 4, 0x94, "RxUnicastPkts" },
159 	{ 4, 0x98, "RxMulticastPkts" },
160 	{ 4, 0x9c, "RxBroadcastPkts" },
161 	{ 4, 0xa0, "RxSAChanges" },
162 	{ 4, 0xa4, "RxFragments" },
163 	{ 4, 0xa8, "RxJumboPkts" },
164 	{ 4, 0xac, "RxSymbolErrors" },
165 	{ 4, 0xc0, "RxDiscarded" },
166 };
167 
168 #define B53_MIBS_SIZE	ARRAY_SIZE(b53_mibs)
169 
170 static const struct b53_mib_desc b53_mibs_58xx[] = {
171 	{ 8, 0x00, "TxOctets" },
172 	{ 4, 0x08, "TxDropPkts" },
173 	{ 4, 0x0c, "TxQPKTQ0" },
174 	{ 4, 0x10, "TxBroadcastPkts" },
175 	{ 4, 0x14, "TxMulticastPkts" },
176 	{ 4, 0x18, "TxUnicastPKts" },
177 	{ 4, 0x1c, "TxCollisions" },
178 	{ 4, 0x20, "TxSingleCollision" },
179 	{ 4, 0x24, "TxMultipleCollision" },
180 	{ 4, 0x28, "TxDeferredCollision" },
181 	{ 4, 0x2c, "TxLateCollision" },
182 	{ 4, 0x30, "TxExcessiveCollision" },
183 	{ 4, 0x34, "TxFrameInDisc" },
184 	{ 4, 0x38, "TxPausePkts" },
185 	{ 4, 0x3c, "TxQPKTQ1" },
186 	{ 4, 0x40, "TxQPKTQ2" },
187 	{ 4, 0x44, "TxQPKTQ3" },
188 	{ 4, 0x48, "TxQPKTQ4" },
189 	{ 4, 0x4c, "TxQPKTQ5" },
190 	{ 8, 0x50, "RxOctets" },
191 	{ 4, 0x58, "RxUndersizePkts" },
192 	{ 4, 0x5c, "RxPausePkts" },
193 	{ 4, 0x60, "RxPkts64Octets" },
194 	{ 4, 0x64, "RxPkts65to127Octets" },
195 	{ 4, 0x68, "RxPkts128to255Octets" },
196 	{ 4, 0x6c, "RxPkts256to511Octets" },
197 	{ 4, 0x70, "RxPkts512to1023Octets" },
198 	{ 4, 0x74, "RxPkts1024toMaxPktsOctets" },
199 	{ 4, 0x78, "RxOversizePkts" },
200 	{ 4, 0x7c, "RxJabbers" },
201 	{ 4, 0x80, "RxAlignmentErrors" },
202 	{ 4, 0x84, "RxFCSErrors" },
203 	{ 8, 0x88, "RxGoodOctets" },
204 	{ 4, 0x90, "RxDropPkts" },
205 	{ 4, 0x94, "RxUnicastPkts" },
206 	{ 4, 0x98, "RxMulticastPkts" },
207 	{ 4, 0x9c, "RxBroadcastPkts" },
208 	{ 4, 0xa0, "RxSAChanges" },
209 	{ 4, 0xa4, "RxFragments" },
210 	{ 4, 0xa8, "RxJumboPkt" },
211 	{ 4, 0xac, "RxSymblErr" },
212 	{ 4, 0xb0, "InRangeErrCount" },
213 	{ 4, 0xb4, "OutRangeErrCount" },
214 	{ 4, 0xb8, "EEELpiEvent" },
215 	{ 4, 0xbc, "EEELpiDuration" },
216 	{ 4, 0xc0, "RxDiscard" },
217 	{ 4, 0xc8, "TxQPKTQ6" },
218 	{ 4, 0xcc, "TxQPKTQ7" },
219 	{ 4, 0xd0, "TxPkts64Octets" },
220 	{ 4, 0xd4, "TxPkts65to127Octets" },
221 	{ 4, 0xd8, "TxPkts128to255Octets" },
222 	{ 4, 0xdc, "TxPkts256to511Ocets" },
223 	{ 4, 0xe0, "TxPkts512to1023Ocets" },
224 	{ 4, 0xe4, "TxPkts1024toMaxPktOcets" },
225 };
226 
227 #define B53_MIBS_58XX_SIZE	ARRAY_SIZE(b53_mibs_58xx)
228 
229 static int b53_do_vlan_op(struct b53_device *dev, u8 op)
230 {
231 	unsigned int i;
232 
233 	b53_write8(dev, B53_ARLIO_PAGE, dev->vta_regs[0], VTA_START_CMD | op);
234 
235 	for (i = 0; i < 10; i++) {
236 		u8 vta;
237 
238 		b53_read8(dev, B53_ARLIO_PAGE, dev->vta_regs[0], &vta);
239 		if (!(vta & VTA_START_CMD))
240 			return 0;
241 
242 		usleep_range(100, 200);
243 	}
244 
245 	return -EIO;
246 }
247 
248 static void b53_set_vlan_entry(struct b53_device *dev, u16 vid,
249 			       struct b53_vlan *vlan)
250 {
251 	if (is5325(dev)) {
252 		u32 entry = 0;
253 
254 		if (vlan->members) {
255 			entry = ((vlan->untag & VA_UNTAG_MASK_25) <<
256 				 VA_UNTAG_S_25) | vlan->members;
257 			if (dev->core_rev >= 3)
258 				entry |= VA_VALID_25_R4 | vid << VA_VID_HIGH_S;
259 			else
260 				entry |= VA_VALID_25;
261 		}
262 
263 		b53_write32(dev, B53_VLAN_PAGE, B53_VLAN_WRITE_25, entry);
264 		b53_write16(dev, B53_VLAN_PAGE, B53_VLAN_TABLE_ACCESS_25, vid |
265 			    VTA_RW_STATE_WR | VTA_RW_OP_EN);
266 	} else if (is5365(dev)) {
267 		u16 entry = 0;
268 
269 		if (vlan->members)
270 			entry = ((vlan->untag & VA_UNTAG_MASK_65) <<
271 				 VA_UNTAG_S_65) | vlan->members | VA_VALID_65;
272 
273 		b53_write16(dev, B53_VLAN_PAGE, B53_VLAN_WRITE_65, entry);
274 		b53_write16(dev, B53_VLAN_PAGE, B53_VLAN_TABLE_ACCESS_65, vid |
275 			    VTA_RW_STATE_WR | VTA_RW_OP_EN);
276 	} else {
277 		b53_write16(dev, B53_ARLIO_PAGE, dev->vta_regs[1], vid);
278 		b53_write32(dev, B53_ARLIO_PAGE, dev->vta_regs[2],
279 			    (vlan->untag << VTE_UNTAG_S) | vlan->members);
280 
281 		b53_do_vlan_op(dev, VTA_CMD_WRITE);
282 	}
283 
284 	dev_dbg(dev->ds->dev, "VID: %d, members: 0x%04x, untag: 0x%04x\n",
285 		vid, vlan->members, vlan->untag);
286 }
287 
288 static void b53_get_vlan_entry(struct b53_device *dev, u16 vid,
289 			       struct b53_vlan *vlan)
290 {
291 	if (is5325(dev)) {
292 		u32 entry = 0;
293 
294 		b53_write16(dev, B53_VLAN_PAGE, B53_VLAN_TABLE_ACCESS_25, vid |
295 			    VTA_RW_STATE_RD | VTA_RW_OP_EN);
296 		b53_read32(dev, B53_VLAN_PAGE, B53_VLAN_WRITE_25, &entry);
297 
298 		if (dev->core_rev >= 3)
299 			vlan->valid = !!(entry & VA_VALID_25_R4);
300 		else
301 			vlan->valid = !!(entry & VA_VALID_25);
302 		vlan->members = entry & VA_MEMBER_MASK;
303 		vlan->untag = (entry >> VA_UNTAG_S_25) & VA_UNTAG_MASK_25;
304 
305 	} else if (is5365(dev)) {
306 		u16 entry = 0;
307 
308 		b53_write16(dev, B53_VLAN_PAGE, B53_VLAN_TABLE_ACCESS_65, vid |
309 			    VTA_RW_STATE_WR | VTA_RW_OP_EN);
310 		b53_read16(dev, B53_VLAN_PAGE, B53_VLAN_WRITE_65, &entry);
311 
312 		vlan->valid = !!(entry & VA_VALID_65);
313 		vlan->members = entry & VA_MEMBER_MASK;
314 		vlan->untag = (entry >> VA_UNTAG_S_65) & VA_UNTAG_MASK_65;
315 	} else {
316 		u32 entry = 0;
317 
318 		b53_write16(dev, B53_ARLIO_PAGE, dev->vta_regs[1], vid);
319 		b53_do_vlan_op(dev, VTA_CMD_READ);
320 		b53_read32(dev, B53_ARLIO_PAGE, dev->vta_regs[2], &entry);
321 		vlan->members = entry & VTE_MEMBERS;
322 		vlan->untag = (entry >> VTE_UNTAG_S) & VTE_MEMBERS;
323 		vlan->valid = true;
324 	}
325 }
326 
327 static void b53_set_forwarding(struct b53_device *dev, int enable)
328 {
329 	u8 mgmt;
330 
331 	b53_read8(dev, B53_CTRL_PAGE, B53_SWITCH_MODE, &mgmt);
332 
333 	if (enable)
334 		mgmt |= SM_SW_FWD_EN;
335 	else
336 		mgmt &= ~SM_SW_FWD_EN;
337 
338 	b53_write8(dev, B53_CTRL_PAGE, B53_SWITCH_MODE, mgmt);
339 
340 	/* Include IMP port in dumb forwarding mode
341 	 */
342 	b53_read8(dev, B53_CTRL_PAGE, B53_SWITCH_CTRL, &mgmt);
343 	mgmt |= B53_MII_DUMB_FWDG_EN;
344 	b53_write8(dev, B53_CTRL_PAGE, B53_SWITCH_CTRL, mgmt);
345 
346 	/* Look at B53_UC_FWD_EN and B53_MC_FWD_EN to decide whether
347 	 * frames should be flooded or not.
348 	 */
349 	b53_read8(dev, B53_CTRL_PAGE, B53_IP_MULTICAST_CTRL, &mgmt);
350 	mgmt |= B53_UC_FWD_EN | B53_MC_FWD_EN | B53_IPMC_FWD_EN;
351 	b53_write8(dev, B53_CTRL_PAGE, B53_IP_MULTICAST_CTRL, mgmt);
352 }
353 
354 static void b53_enable_vlan(struct b53_device *dev, bool enable,
355 			    bool enable_filtering)
356 {
357 	u8 mgmt, vc0, vc1, vc4 = 0, vc5;
358 
359 	b53_read8(dev, B53_CTRL_PAGE, B53_SWITCH_MODE, &mgmt);
360 	b53_read8(dev, B53_VLAN_PAGE, B53_VLAN_CTRL0, &vc0);
361 	b53_read8(dev, B53_VLAN_PAGE, B53_VLAN_CTRL1, &vc1);
362 
363 	if (is5325(dev) || is5365(dev)) {
364 		b53_read8(dev, B53_VLAN_PAGE, B53_VLAN_CTRL4_25, &vc4);
365 		b53_read8(dev, B53_VLAN_PAGE, B53_VLAN_CTRL5_25, &vc5);
366 	} else if (is63xx(dev)) {
367 		b53_read8(dev, B53_VLAN_PAGE, B53_VLAN_CTRL4_63XX, &vc4);
368 		b53_read8(dev, B53_VLAN_PAGE, B53_VLAN_CTRL5_63XX, &vc5);
369 	} else {
370 		b53_read8(dev, B53_VLAN_PAGE, B53_VLAN_CTRL4, &vc4);
371 		b53_read8(dev, B53_VLAN_PAGE, B53_VLAN_CTRL5, &vc5);
372 	}
373 
374 	if (enable) {
375 		vc0 |= VC0_VLAN_EN | VC0_VID_CHK_EN | VC0_VID_HASH_VID;
376 		vc1 |= VC1_RX_MCST_UNTAG_EN | VC1_RX_MCST_FWD_EN;
377 		vc4 &= ~VC4_ING_VID_CHECK_MASK;
378 		if (enable_filtering) {
379 			vc4 |= VC4_ING_VID_VIO_DROP << VC4_ING_VID_CHECK_S;
380 			vc5 |= VC5_DROP_VTABLE_MISS;
381 		} else {
382 			vc4 |= VC4_ING_VID_VIO_FWD << VC4_ING_VID_CHECK_S;
383 			vc5 &= ~VC5_DROP_VTABLE_MISS;
384 		}
385 
386 		if (is5325(dev))
387 			vc0 &= ~VC0_RESERVED_1;
388 
389 		if (is5325(dev) || is5365(dev))
390 			vc1 |= VC1_RX_MCST_TAG_EN;
391 
392 	} else {
393 		vc0 &= ~(VC0_VLAN_EN | VC0_VID_CHK_EN | VC0_VID_HASH_VID);
394 		vc1 &= ~(VC1_RX_MCST_UNTAG_EN | VC1_RX_MCST_FWD_EN);
395 		vc4 &= ~VC4_ING_VID_CHECK_MASK;
396 		vc5 &= ~VC5_DROP_VTABLE_MISS;
397 
398 		if (is5325(dev) || is5365(dev))
399 			vc4 |= VC4_ING_VID_VIO_FWD << VC4_ING_VID_CHECK_S;
400 		else
401 			vc4 |= VC4_ING_VID_VIO_TO_IMP << VC4_ING_VID_CHECK_S;
402 
403 		if (is5325(dev) || is5365(dev))
404 			vc1 &= ~VC1_RX_MCST_TAG_EN;
405 	}
406 
407 	if (!is5325(dev) && !is5365(dev))
408 		vc5 &= ~VC5_VID_FFF_EN;
409 
410 	b53_write8(dev, B53_VLAN_PAGE, B53_VLAN_CTRL0, vc0);
411 	b53_write8(dev, B53_VLAN_PAGE, B53_VLAN_CTRL1, vc1);
412 
413 	if (is5325(dev) || is5365(dev)) {
414 		/* enable the high 8 bit vid check on 5325 */
415 		if (is5325(dev) && enable)
416 			b53_write8(dev, B53_VLAN_PAGE, B53_VLAN_CTRL3,
417 				   VC3_HIGH_8BIT_EN);
418 		else
419 			b53_write8(dev, B53_VLAN_PAGE, B53_VLAN_CTRL3, 0);
420 
421 		b53_write8(dev, B53_VLAN_PAGE, B53_VLAN_CTRL4_25, vc4);
422 		b53_write8(dev, B53_VLAN_PAGE, B53_VLAN_CTRL5_25, vc5);
423 	} else if (is63xx(dev)) {
424 		b53_write16(dev, B53_VLAN_PAGE, B53_VLAN_CTRL3_63XX, 0);
425 		b53_write8(dev, B53_VLAN_PAGE, B53_VLAN_CTRL4_63XX, vc4);
426 		b53_write8(dev, B53_VLAN_PAGE, B53_VLAN_CTRL5_63XX, vc5);
427 	} else {
428 		b53_write16(dev, B53_VLAN_PAGE, B53_VLAN_CTRL3, 0);
429 		b53_write8(dev, B53_VLAN_PAGE, B53_VLAN_CTRL4, vc4);
430 		b53_write8(dev, B53_VLAN_PAGE, B53_VLAN_CTRL5, vc5);
431 	}
432 
433 	b53_write8(dev, B53_CTRL_PAGE, B53_SWITCH_MODE, mgmt);
434 
435 	dev->vlan_enabled = enable;
436 }
437 
438 static int b53_set_jumbo(struct b53_device *dev, bool enable, bool allow_10_100)
439 {
440 	u32 port_mask = 0;
441 	u16 max_size = JMS_MIN_SIZE;
442 
443 	if (is5325(dev) || is5365(dev))
444 		return -EINVAL;
445 
446 	if (enable) {
447 		port_mask = dev->enabled_ports;
448 		max_size = JMS_MAX_SIZE;
449 		if (allow_10_100)
450 			port_mask |= JPM_10_100_JUMBO_EN;
451 	}
452 
453 	b53_write32(dev, B53_JUMBO_PAGE, dev->jumbo_pm_reg, port_mask);
454 	return b53_write16(dev, B53_JUMBO_PAGE, dev->jumbo_size_reg, max_size);
455 }
456 
457 static int b53_flush_arl(struct b53_device *dev, u8 mask)
458 {
459 	unsigned int i;
460 
461 	b53_write8(dev, B53_CTRL_PAGE, B53_FAST_AGE_CTRL,
462 		   FAST_AGE_DONE | FAST_AGE_DYNAMIC | mask);
463 
464 	for (i = 0; i < 10; i++) {
465 		u8 fast_age_ctrl;
466 
467 		b53_read8(dev, B53_CTRL_PAGE, B53_FAST_AGE_CTRL,
468 			  &fast_age_ctrl);
469 
470 		if (!(fast_age_ctrl & FAST_AGE_DONE))
471 			goto out;
472 
473 		msleep(1);
474 	}
475 
476 	return -ETIMEDOUT;
477 out:
478 	/* Only age dynamic entries (default behavior) */
479 	b53_write8(dev, B53_CTRL_PAGE, B53_FAST_AGE_CTRL, FAST_AGE_DYNAMIC);
480 	return 0;
481 }
482 
483 static int b53_fast_age_port(struct b53_device *dev, int port)
484 {
485 	b53_write8(dev, B53_CTRL_PAGE, B53_FAST_AGE_PORT_CTRL, port);
486 
487 	return b53_flush_arl(dev, FAST_AGE_PORT);
488 }
489 
490 static int b53_fast_age_vlan(struct b53_device *dev, u16 vid)
491 {
492 	b53_write16(dev, B53_CTRL_PAGE, B53_FAST_AGE_VID_CTRL, vid);
493 
494 	return b53_flush_arl(dev, FAST_AGE_VLAN);
495 }
496 
497 void b53_imp_vlan_setup(struct dsa_switch *ds, int cpu_port)
498 {
499 	struct b53_device *dev = ds->priv;
500 	unsigned int i;
501 	u16 pvlan;
502 
503 	/* Enable the IMP port to be in the same VLAN as the other ports
504 	 * on a per-port basis such that we only have Port i and IMP in
505 	 * the same VLAN.
506 	 */
507 	b53_for_each_port(dev, i) {
508 		b53_read16(dev, B53_PVLAN_PAGE, B53_PVLAN_PORT_MASK(i), &pvlan);
509 		pvlan |= BIT(cpu_port);
510 		b53_write16(dev, B53_PVLAN_PAGE, B53_PVLAN_PORT_MASK(i), pvlan);
511 	}
512 }
513 EXPORT_SYMBOL(b53_imp_vlan_setup);
514 
515 int b53_enable_port(struct dsa_switch *ds, int port, struct phy_device *phy)
516 {
517 	struct b53_device *dev = ds->priv;
518 	unsigned int cpu_port;
519 	int ret = 0;
520 	u16 pvlan;
521 
522 	if (!dsa_is_user_port(ds, port))
523 		return 0;
524 
525 	cpu_port = dsa_to_port(ds, port)->cpu_dp->index;
526 
527 	b53_br_egress_floods(ds, port, true, true);
528 
529 	if (dev->ops->irq_enable)
530 		ret = dev->ops->irq_enable(dev, port);
531 	if (ret)
532 		return ret;
533 
534 	/* Clear the Rx and Tx disable bits and set to no spanning tree */
535 	b53_write8(dev, B53_CTRL_PAGE, B53_PORT_CTRL(port), 0);
536 
537 	/* Set this port, and only this one to be in the default VLAN,
538 	 * if member of a bridge, restore its membership prior to
539 	 * bringing down this port.
540 	 */
541 	b53_read16(dev, B53_PVLAN_PAGE, B53_PVLAN_PORT_MASK(port), &pvlan);
542 	pvlan &= ~0x1ff;
543 	pvlan |= BIT(port);
544 	pvlan |= dev->ports[port].vlan_ctl_mask;
545 	b53_write16(dev, B53_PVLAN_PAGE, B53_PVLAN_PORT_MASK(port), pvlan);
546 
547 	b53_imp_vlan_setup(ds, cpu_port);
548 
549 	/* If EEE was enabled, restore it */
550 	if (dev->ports[port].eee.eee_enabled)
551 		b53_eee_enable_set(ds, port, true);
552 
553 	return 0;
554 }
555 EXPORT_SYMBOL(b53_enable_port);
556 
557 void b53_disable_port(struct dsa_switch *ds, int port)
558 {
559 	struct b53_device *dev = ds->priv;
560 	u8 reg;
561 
562 	/* Disable Tx/Rx for the port */
563 	b53_read8(dev, B53_CTRL_PAGE, B53_PORT_CTRL(port), &reg);
564 	reg |= PORT_CTRL_RX_DISABLE | PORT_CTRL_TX_DISABLE;
565 	b53_write8(dev, B53_CTRL_PAGE, B53_PORT_CTRL(port), reg);
566 
567 	if (dev->ops->irq_disable)
568 		dev->ops->irq_disable(dev, port);
569 }
570 EXPORT_SYMBOL(b53_disable_port);
571 
572 void b53_brcm_hdr_setup(struct dsa_switch *ds, int port)
573 {
574 	struct b53_device *dev = ds->priv;
575 	bool tag_en = !(dev->tag_protocol == DSA_TAG_PROTO_NONE);
576 	u8 hdr_ctl, val;
577 	u16 reg;
578 
579 	/* Resolve which bit controls the Broadcom tag */
580 	switch (port) {
581 	case 8:
582 		val = BRCM_HDR_P8_EN;
583 		break;
584 	case 7:
585 		val = BRCM_HDR_P7_EN;
586 		break;
587 	case 5:
588 		val = BRCM_HDR_P5_EN;
589 		break;
590 	default:
591 		val = 0;
592 		break;
593 	}
594 
595 	/* Enable management mode if tagging is requested */
596 	b53_read8(dev, B53_CTRL_PAGE, B53_SWITCH_MODE, &hdr_ctl);
597 	if (tag_en)
598 		hdr_ctl |= SM_SW_FWD_MODE;
599 	else
600 		hdr_ctl &= ~SM_SW_FWD_MODE;
601 	b53_write8(dev, B53_CTRL_PAGE, B53_SWITCH_MODE, hdr_ctl);
602 
603 	/* Configure the appropriate IMP port */
604 	b53_read8(dev, B53_MGMT_PAGE, B53_GLOBAL_CONFIG, &hdr_ctl);
605 	if (port == 8)
606 		hdr_ctl |= GC_FRM_MGMT_PORT_MII;
607 	else if (port == 5)
608 		hdr_ctl |= GC_FRM_MGMT_PORT_M;
609 	b53_write8(dev, B53_MGMT_PAGE, B53_GLOBAL_CONFIG, hdr_ctl);
610 
611 	/* Enable Broadcom tags for IMP port */
612 	b53_read8(dev, B53_MGMT_PAGE, B53_BRCM_HDR, &hdr_ctl);
613 	if (tag_en)
614 		hdr_ctl |= val;
615 	else
616 		hdr_ctl &= ~val;
617 	b53_write8(dev, B53_MGMT_PAGE, B53_BRCM_HDR, hdr_ctl);
618 
619 	/* Registers below are only accessible on newer devices */
620 	if (!is58xx(dev))
621 		return;
622 
623 	/* Enable reception Broadcom tag for CPU TX (switch RX) to
624 	 * allow us to tag outgoing frames
625 	 */
626 	b53_read16(dev, B53_MGMT_PAGE, B53_BRCM_HDR_RX_DIS, &reg);
627 	if (tag_en)
628 		reg &= ~BIT(port);
629 	else
630 		reg |= BIT(port);
631 	b53_write16(dev, B53_MGMT_PAGE, B53_BRCM_HDR_RX_DIS, reg);
632 
633 	/* Enable transmission of Broadcom tags from the switch (CPU RX) to
634 	 * allow delivering frames to the per-port net_devices
635 	 */
636 	b53_read16(dev, B53_MGMT_PAGE, B53_BRCM_HDR_TX_DIS, &reg);
637 	if (tag_en)
638 		reg &= ~BIT(port);
639 	else
640 		reg |= BIT(port);
641 	b53_write16(dev, B53_MGMT_PAGE, B53_BRCM_HDR_TX_DIS, reg);
642 }
643 EXPORT_SYMBOL(b53_brcm_hdr_setup);
644 
645 static void b53_enable_cpu_port(struct b53_device *dev, int port)
646 {
647 	u8 port_ctrl;
648 
649 	/* BCM5325 CPU port is at 8 */
650 	if ((is5325(dev) || is5365(dev)) && port == B53_CPU_PORT_25)
651 		port = B53_CPU_PORT;
652 
653 	port_ctrl = PORT_CTRL_RX_BCST_EN |
654 		    PORT_CTRL_RX_MCST_EN |
655 		    PORT_CTRL_RX_UCST_EN;
656 	b53_write8(dev, B53_CTRL_PAGE, B53_PORT_CTRL(port), port_ctrl);
657 
658 	b53_brcm_hdr_setup(dev->ds, port);
659 
660 	b53_br_egress_floods(dev->ds, port, true, true);
661 }
662 
663 static void b53_enable_mib(struct b53_device *dev)
664 {
665 	u8 gc;
666 
667 	b53_read8(dev, B53_MGMT_PAGE, B53_GLOBAL_CONFIG, &gc);
668 	gc &= ~(GC_RESET_MIB | GC_MIB_AC_EN);
669 	b53_write8(dev, B53_MGMT_PAGE, B53_GLOBAL_CONFIG, gc);
670 }
671 
672 static u16 b53_default_pvid(struct b53_device *dev)
673 {
674 	if (is5325(dev) || is5365(dev))
675 		return 1;
676 	else
677 		return 0;
678 }
679 
680 int b53_configure_vlan(struct dsa_switch *ds)
681 {
682 	struct b53_device *dev = ds->priv;
683 	struct b53_vlan vl = { 0 };
684 	struct b53_vlan *v;
685 	int i, def_vid;
686 	u16 vid;
687 
688 	def_vid = b53_default_pvid(dev);
689 
690 	/* clear all vlan entries */
691 	if (is5325(dev) || is5365(dev)) {
692 		for (i = def_vid; i < dev->num_vlans; i++)
693 			b53_set_vlan_entry(dev, i, &vl);
694 	} else {
695 		b53_do_vlan_op(dev, VTA_CMD_CLEAR);
696 	}
697 
698 	b53_enable_vlan(dev, dev->vlan_enabled, ds->vlan_filtering);
699 
700 	b53_for_each_port(dev, i)
701 		b53_write16(dev, B53_VLAN_PAGE,
702 			    B53_VLAN_PORT_DEF_TAG(i), def_vid);
703 
704 	/* Upon initial call we have not set-up any VLANs, but upon
705 	 * system resume, we need to restore all VLAN entries.
706 	 */
707 	for (vid = def_vid; vid < dev->num_vlans; vid++) {
708 		v = &dev->vlans[vid];
709 
710 		if (!v->members)
711 			continue;
712 
713 		b53_set_vlan_entry(dev, vid, v);
714 		b53_fast_age_vlan(dev, vid);
715 	}
716 
717 	return 0;
718 }
719 EXPORT_SYMBOL(b53_configure_vlan);
720 
721 static void b53_switch_reset_gpio(struct b53_device *dev)
722 {
723 	int gpio = dev->reset_gpio;
724 
725 	if (gpio < 0)
726 		return;
727 
728 	/* Reset sequence: RESET low(50ms)->high(20ms)
729 	 */
730 	gpio_set_value(gpio, 0);
731 	mdelay(50);
732 
733 	gpio_set_value(gpio, 1);
734 	mdelay(20);
735 
736 	dev->current_page = 0xff;
737 }
738 
739 static int b53_switch_reset(struct b53_device *dev)
740 {
741 	unsigned int timeout = 1000;
742 	u8 mgmt, reg;
743 
744 	b53_switch_reset_gpio(dev);
745 
746 	if (is539x(dev)) {
747 		b53_write8(dev, B53_CTRL_PAGE, B53_SOFTRESET, 0x83);
748 		b53_write8(dev, B53_CTRL_PAGE, B53_SOFTRESET, 0x00);
749 	}
750 
751 	/* This is specific to 58xx devices here, do not use is58xx() which
752 	 * covers the larger Starfigther 2 family, including 7445/7278 which
753 	 * still use this driver as a library and need to perform the reset
754 	 * earlier.
755 	 */
756 	if (dev->chip_id == BCM58XX_DEVICE_ID ||
757 	    dev->chip_id == BCM583XX_DEVICE_ID) {
758 		b53_read8(dev, B53_CTRL_PAGE, B53_SOFTRESET, &reg);
759 		reg |= SW_RST | EN_SW_RST | EN_CH_RST;
760 		b53_write8(dev, B53_CTRL_PAGE, B53_SOFTRESET, reg);
761 
762 		do {
763 			b53_read8(dev, B53_CTRL_PAGE, B53_SOFTRESET, &reg);
764 			if (!(reg & SW_RST))
765 				break;
766 
767 			usleep_range(1000, 2000);
768 		} while (timeout-- > 0);
769 
770 		if (timeout == 0)
771 			return -ETIMEDOUT;
772 	}
773 
774 	b53_read8(dev, B53_CTRL_PAGE, B53_SWITCH_MODE, &mgmt);
775 
776 	if (!(mgmt & SM_SW_FWD_EN)) {
777 		mgmt &= ~SM_SW_FWD_MODE;
778 		mgmt |= SM_SW_FWD_EN;
779 
780 		b53_write8(dev, B53_CTRL_PAGE, B53_SWITCH_MODE, mgmt);
781 		b53_read8(dev, B53_CTRL_PAGE, B53_SWITCH_MODE, &mgmt);
782 
783 		if (!(mgmt & SM_SW_FWD_EN)) {
784 			dev_err(dev->dev, "Failed to enable switch!\n");
785 			return -EINVAL;
786 		}
787 	}
788 
789 	b53_enable_mib(dev);
790 
791 	return b53_flush_arl(dev, FAST_AGE_STATIC);
792 }
793 
794 static int b53_phy_read16(struct dsa_switch *ds, int addr, int reg)
795 {
796 	struct b53_device *priv = ds->priv;
797 	u16 value = 0;
798 	int ret;
799 
800 	if (priv->ops->phy_read16)
801 		ret = priv->ops->phy_read16(priv, addr, reg, &value);
802 	else
803 		ret = b53_read16(priv, B53_PORT_MII_PAGE(addr),
804 				 reg * 2, &value);
805 
806 	return ret ? ret : value;
807 }
808 
809 static int b53_phy_write16(struct dsa_switch *ds, int addr, int reg, u16 val)
810 {
811 	struct b53_device *priv = ds->priv;
812 
813 	if (priv->ops->phy_write16)
814 		return priv->ops->phy_write16(priv, addr, reg, val);
815 
816 	return b53_write16(priv, B53_PORT_MII_PAGE(addr), reg * 2, val);
817 }
818 
819 static int b53_reset_switch(struct b53_device *priv)
820 {
821 	/* reset vlans */
822 	memset(priv->vlans, 0, sizeof(*priv->vlans) * priv->num_vlans);
823 	memset(priv->ports, 0, sizeof(*priv->ports) * priv->num_ports);
824 
825 	priv->serdes_lane = B53_INVALID_LANE;
826 
827 	return b53_switch_reset(priv);
828 }
829 
830 static int b53_apply_config(struct b53_device *priv)
831 {
832 	/* disable switching */
833 	b53_set_forwarding(priv, 0);
834 
835 	b53_configure_vlan(priv->ds);
836 
837 	/* enable switching */
838 	b53_set_forwarding(priv, 1);
839 
840 	return 0;
841 }
842 
843 static void b53_reset_mib(struct b53_device *priv)
844 {
845 	u8 gc;
846 
847 	b53_read8(priv, B53_MGMT_PAGE, B53_GLOBAL_CONFIG, &gc);
848 
849 	b53_write8(priv, B53_MGMT_PAGE, B53_GLOBAL_CONFIG, gc | GC_RESET_MIB);
850 	msleep(1);
851 	b53_write8(priv, B53_MGMT_PAGE, B53_GLOBAL_CONFIG, gc & ~GC_RESET_MIB);
852 	msleep(1);
853 }
854 
855 static const struct b53_mib_desc *b53_get_mib(struct b53_device *dev)
856 {
857 	if (is5365(dev))
858 		return b53_mibs_65;
859 	else if (is63xx(dev))
860 		return b53_mibs_63xx;
861 	else if (is58xx(dev))
862 		return b53_mibs_58xx;
863 	else
864 		return b53_mibs;
865 }
866 
867 static unsigned int b53_get_mib_size(struct b53_device *dev)
868 {
869 	if (is5365(dev))
870 		return B53_MIBS_65_SIZE;
871 	else if (is63xx(dev))
872 		return B53_MIBS_63XX_SIZE;
873 	else if (is58xx(dev))
874 		return B53_MIBS_58XX_SIZE;
875 	else
876 		return B53_MIBS_SIZE;
877 }
878 
879 static struct phy_device *b53_get_phy_device(struct dsa_switch *ds, int port)
880 {
881 	/* These ports typically do not have built-in PHYs */
882 	switch (port) {
883 	case B53_CPU_PORT_25:
884 	case 7:
885 	case B53_CPU_PORT:
886 		return NULL;
887 	}
888 
889 	return mdiobus_get_phy(ds->slave_mii_bus, port);
890 }
891 
892 void b53_get_strings(struct dsa_switch *ds, int port, u32 stringset,
893 		     uint8_t *data)
894 {
895 	struct b53_device *dev = ds->priv;
896 	const struct b53_mib_desc *mibs = b53_get_mib(dev);
897 	unsigned int mib_size = b53_get_mib_size(dev);
898 	struct phy_device *phydev;
899 	unsigned int i;
900 
901 	if (stringset == ETH_SS_STATS) {
902 		for (i = 0; i < mib_size; i++)
903 			strlcpy(data + i * ETH_GSTRING_LEN,
904 				mibs[i].name, ETH_GSTRING_LEN);
905 	} else if (stringset == ETH_SS_PHY_STATS) {
906 		phydev = b53_get_phy_device(ds, port);
907 		if (!phydev)
908 			return;
909 
910 		phy_ethtool_get_strings(phydev, data);
911 	}
912 }
913 EXPORT_SYMBOL(b53_get_strings);
914 
915 void b53_get_ethtool_stats(struct dsa_switch *ds, int port, uint64_t *data)
916 {
917 	struct b53_device *dev = ds->priv;
918 	const struct b53_mib_desc *mibs = b53_get_mib(dev);
919 	unsigned int mib_size = b53_get_mib_size(dev);
920 	const struct b53_mib_desc *s;
921 	unsigned int i;
922 	u64 val = 0;
923 
924 	if (is5365(dev) && port == 5)
925 		port = 8;
926 
927 	mutex_lock(&dev->stats_mutex);
928 
929 	for (i = 0; i < mib_size; i++) {
930 		s = &mibs[i];
931 
932 		if (s->size == 8) {
933 			b53_read64(dev, B53_MIB_PAGE(port), s->offset, &val);
934 		} else {
935 			u32 val32;
936 
937 			b53_read32(dev, B53_MIB_PAGE(port), s->offset,
938 				   &val32);
939 			val = val32;
940 		}
941 		data[i] = (u64)val;
942 	}
943 
944 	mutex_unlock(&dev->stats_mutex);
945 }
946 EXPORT_SYMBOL(b53_get_ethtool_stats);
947 
948 void b53_get_ethtool_phy_stats(struct dsa_switch *ds, int port, uint64_t *data)
949 {
950 	struct phy_device *phydev;
951 
952 	phydev = b53_get_phy_device(ds, port);
953 	if (!phydev)
954 		return;
955 
956 	phy_ethtool_get_stats(phydev, NULL, data);
957 }
958 EXPORT_SYMBOL(b53_get_ethtool_phy_stats);
959 
960 int b53_get_sset_count(struct dsa_switch *ds, int port, int sset)
961 {
962 	struct b53_device *dev = ds->priv;
963 	struct phy_device *phydev;
964 
965 	if (sset == ETH_SS_STATS) {
966 		return b53_get_mib_size(dev);
967 	} else if (sset == ETH_SS_PHY_STATS) {
968 		phydev = b53_get_phy_device(ds, port);
969 		if (!phydev)
970 			return 0;
971 
972 		return phy_ethtool_get_sset_count(phydev);
973 	}
974 
975 	return 0;
976 }
977 EXPORT_SYMBOL(b53_get_sset_count);
978 
979 static int b53_setup(struct dsa_switch *ds)
980 {
981 	struct b53_device *dev = ds->priv;
982 	unsigned int port;
983 	int ret;
984 
985 	ret = b53_reset_switch(dev);
986 	if (ret) {
987 		dev_err(ds->dev, "failed to reset switch\n");
988 		return ret;
989 	}
990 
991 	b53_reset_mib(dev);
992 
993 	ret = b53_apply_config(dev);
994 	if (ret)
995 		dev_err(ds->dev, "failed to apply configuration\n");
996 
997 	/* Configure IMP/CPU port, disable all other ports. Enabled
998 	 * ports will be configured with .port_enable
999 	 */
1000 	for (port = 0; port < dev->num_ports; port++) {
1001 		if (dsa_is_cpu_port(ds, port))
1002 			b53_enable_cpu_port(dev, port);
1003 		else
1004 			b53_disable_port(ds, port);
1005 	}
1006 
1007 	/* Let DSA handle the case were multiple bridges span the same switch
1008 	 * device and different VLAN awareness settings are requested, which
1009 	 * would be breaking filtering semantics for any of the other bridge
1010 	 * devices. (not hardware supported)
1011 	 */
1012 	ds->vlan_filtering_is_global = true;
1013 
1014 	return ret;
1015 }
1016 
1017 static void b53_force_link(struct b53_device *dev, int port, int link)
1018 {
1019 	u8 reg, val, off;
1020 
1021 	/* Override the port settings */
1022 	if (port == dev->cpu_port) {
1023 		off = B53_PORT_OVERRIDE_CTRL;
1024 		val = PORT_OVERRIDE_EN;
1025 	} else {
1026 		off = B53_GMII_PORT_OVERRIDE_CTRL(port);
1027 		val = GMII_PO_EN;
1028 	}
1029 
1030 	b53_read8(dev, B53_CTRL_PAGE, off, &reg);
1031 	reg |= val;
1032 	if (link)
1033 		reg |= PORT_OVERRIDE_LINK;
1034 	else
1035 		reg &= ~PORT_OVERRIDE_LINK;
1036 	b53_write8(dev, B53_CTRL_PAGE, off, reg);
1037 }
1038 
1039 static void b53_force_port_config(struct b53_device *dev, int port,
1040 				  int speed, int duplex, int pause)
1041 {
1042 	u8 reg, val, off;
1043 
1044 	/* Override the port settings */
1045 	if (port == dev->cpu_port) {
1046 		off = B53_PORT_OVERRIDE_CTRL;
1047 		val = PORT_OVERRIDE_EN;
1048 	} else {
1049 		off = B53_GMII_PORT_OVERRIDE_CTRL(port);
1050 		val = GMII_PO_EN;
1051 	}
1052 
1053 	b53_read8(dev, B53_CTRL_PAGE, off, &reg);
1054 	reg |= val;
1055 	if (duplex == DUPLEX_FULL)
1056 		reg |= PORT_OVERRIDE_FULL_DUPLEX;
1057 	else
1058 		reg &= ~PORT_OVERRIDE_FULL_DUPLEX;
1059 
1060 	switch (speed) {
1061 	case 2000:
1062 		reg |= PORT_OVERRIDE_SPEED_2000M;
1063 		/* fallthrough */
1064 	case SPEED_1000:
1065 		reg |= PORT_OVERRIDE_SPEED_1000M;
1066 		break;
1067 	case SPEED_100:
1068 		reg |= PORT_OVERRIDE_SPEED_100M;
1069 		break;
1070 	case SPEED_10:
1071 		reg |= PORT_OVERRIDE_SPEED_10M;
1072 		break;
1073 	default:
1074 		dev_err(dev->dev, "unknown speed: %d\n", speed);
1075 		return;
1076 	}
1077 
1078 	if (pause & MLO_PAUSE_RX)
1079 		reg |= PORT_OVERRIDE_RX_FLOW;
1080 	if (pause & MLO_PAUSE_TX)
1081 		reg |= PORT_OVERRIDE_TX_FLOW;
1082 
1083 	b53_write8(dev, B53_CTRL_PAGE, off, reg);
1084 }
1085 
1086 static void b53_adjust_link(struct dsa_switch *ds, int port,
1087 			    struct phy_device *phydev)
1088 {
1089 	struct b53_device *dev = ds->priv;
1090 	struct ethtool_eee *p = &dev->ports[port].eee;
1091 	u8 rgmii_ctrl = 0, reg = 0, off;
1092 	int pause = 0;
1093 
1094 	if (!phy_is_pseudo_fixed_link(phydev))
1095 		return;
1096 
1097 	/* Enable flow control on BCM5301x's CPU port */
1098 	if (is5301x(dev) && port == dev->cpu_port)
1099 		pause = MLO_PAUSE_TXRX_MASK;
1100 
1101 	if (phydev->pause) {
1102 		if (phydev->asym_pause)
1103 			pause |= MLO_PAUSE_TX;
1104 		pause |= MLO_PAUSE_RX;
1105 	}
1106 
1107 	b53_force_port_config(dev, port, phydev->speed, phydev->duplex, pause);
1108 	b53_force_link(dev, port, phydev->link);
1109 
1110 	if (is531x5(dev) && phy_interface_is_rgmii(phydev)) {
1111 		if (port == 8)
1112 			off = B53_RGMII_CTRL_IMP;
1113 		else
1114 			off = B53_RGMII_CTRL_P(port);
1115 
1116 		/* Configure the port RGMII clock delay by DLL disabled and
1117 		 * tx_clk aligned timing (restoring to reset defaults)
1118 		 */
1119 		b53_read8(dev, B53_CTRL_PAGE, off, &rgmii_ctrl);
1120 		rgmii_ctrl &= ~(RGMII_CTRL_DLL_RXC | RGMII_CTRL_DLL_TXC |
1121 				RGMII_CTRL_TIMING_SEL);
1122 
1123 		/* PHY_INTERFACE_MODE_RGMII_TXID means TX internal delay, make
1124 		 * sure that we enable the port TX clock internal delay to
1125 		 * account for this internal delay that is inserted, otherwise
1126 		 * the switch won't be able to receive correctly.
1127 		 *
1128 		 * PHY_INTERFACE_MODE_RGMII means that we are not introducing
1129 		 * any delay neither on transmission nor reception, so the
1130 		 * BCM53125 must also be configured accordingly to account for
1131 		 * the lack of delay and introduce
1132 		 *
1133 		 * The BCM53125 switch has its RX clock and TX clock control
1134 		 * swapped, hence the reason why we modify the TX clock path in
1135 		 * the "RGMII" case
1136 		 */
1137 		if (phydev->interface == PHY_INTERFACE_MODE_RGMII_TXID)
1138 			rgmii_ctrl |= RGMII_CTRL_DLL_TXC;
1139 		if (phydev->interface == PHY_INTERFACE_MODE_RGMII)
1140 			rgmii_ctrl |= RGMII_CTRL_DLL_TXC | RGMII_CTRL_DLL_RXC;
1141 		rgmii_ctrl |= RGMII_CTRL_TIMING_SEL;
1142 		b53_write8(dev, B53_CTRL_PAGE, off, rgmii_ctrl);
1143 
1144 		dev_info(ds->dev, "Configured port %d for %s\n", port,
1145 			 phy_modes(phydev->interface));
1146 	}
1147 
1148 	/* configure MII port if necessary */
1149 	if (is5325(dev)) {
1150 		b53_read8(dev, B53_CTRL_PAGE, B53_PORT_OVERRIDE_CTRL,
1151 			  &reg);
1152 
1153 		/* reverse mii needs to be enabled */
1154 		if (!(reg & PORT_OVERRIDE_RV_MII_25)) {
1155 			b53_write8(dev, B53_CTRL_PAGE, B53_PORT_OVERRIDE_CTRL,
1156 				   reg | PORT_OVERRIDE_RV_MII_25);
1157 			b53_read8(dev, B53_CTRL_PAGE, B53_PORT_OVERRIDE_CTRL,
1158 				  &reg);
1159 
1160 			if (!(reg & PORT_OVERRIDE_RV_MII_25)) {
1161 				dev_err(ds->dev,
1162 					"Failed to enable reverse MII mode\n");
1163 				return;
1164 			}
1165 		}
1166 	} else if (is5301x(dev)) {
1167 		if (port != dev->cpu_port) {
1168 			b53_force_port_config(dev, dev->cpu_port, 2000,
1169 					      DUPLEX_FULL, MLO_PAUSE_TXRX_MASK);
1170 			b53_force_link(dev, dev->cpu_port, 1);
1171 		}
1172 	}
1173 
1174 	/* Re-negotiate EEE if it was enabled already */
1175 	p->eee_enabled = b53_eee_init(ds, port, phydev);
1176 }
1177 
1178 void b53_port_event(struct dsa_switch *ds, int port)
1179 {
1180 	struct b53_device *dev = ds->priv;
1181 	bool link;
1182 	u16 sts;
1183 
1184 	b53_read16(dev, B53_STAT_PAGE, B53_LINK_STAT, &sts);
1185 	link = !!(sts & BIT(port));
1186 	dsa_port_phylink_mac_change(ds, port, link);
1187 }
1188 EXPORT_SYMBOL(b53_port_event);
1189 
1190 void b53_phylink_validate(struct dsa_switch *ds, int port,
1191 			  unsigned long *supported,
1192 			  struct phylink_link_state *state)
1193 {
1194 	struct b53_device *dev = ds->priv;
1195 	__ETHTOOL_DECLARE_LINK_MODE_MASK(mask) = { 0, };
1196 
1197 	if (dev->ops->serdes_phylink_validate)
1198 		dev->ops->serdes_phylink_validate(dev, port, mask, state);
1199 
1200 	/* Allow all the expected bits */
1201 	phylink_set(mask, Autoneg);
1202 	phylink_set_port_modes(mask);
1203 	phylink_set(mask, Pause);
1204 	phylink_set(mask, Asym_Pause);
1205 
1206 	/* With the exclusion of 5325/5365, MII, Reverse MII and 802.3z, we
1207 	 * support Gigabit, including Half duplex.
1208 	 */
1209 	if (state->interface != PHY_INTERFACE_MODE_MII &&
1210 	    state->interface != PHY_INTERFACE_MODE_REVMII &&
1211 	    !phy_interface_mode_is_8023z(state->interface) &&
1212 	    !(is5325(dev) || is5365(dev))) {
1213 		phylink_set(mask, 1000baseT_Full);
1214 		phylink_set(mask, 1000baseT_Half);
1215 	}
1216 
1217 	if (!phy_interface_mode_is_8023z(state->interface)) {
1218 		phylink_set(mask, 10baseT_Half);
1219 		phylink_set(mask, 10baseT_Full);
1220 		phylink_set(mask, 100baseT_Half);
1221 		phylink_set(mask, 100baseT_Full);
1222 	}
1223 
1224 	bitmap_and(supported, supported, mask,
1225 		   __ETHTOOL_LINK_MODE_MASK_NBITS);
1226 	bitmap_and(state->advertising, state->advertising, mask,
1227 		   __ETHTOOL_LINK_MODE_MASK_NBITS);
1228 
1229 	phylink_helper_basex_speed(state);
1230 }
1231 EXPORT_SYMBOL(b53_phylink_validate);
1232 
1233 int b53_phylink_mac_link_state(struct dsa_switch *ds, int port,
1234 			       struct phylink_link_state *state)
1235 {
1236 	struct b53_device *dev = ds->priv;
1237 	int ret = -EOPNOTSUPP;
1238 
1239 	if ((phy_interface_mode_is_8023z(state->interface) ||
1240 	     state->interface == PHY_INTERFACE_MODE_SGMII) &&
1241 	     dev->ops->serdes_link_state)
1242 		ret = dev->ops->serdes_link_state(dev, port, state);
1243 
1244 	return ret;
1245 }
1246 EXPORT_SYMBOL(b53_phylink_mac_link_state);
1247 
1248 void b53_phylink_mac_config(struct dsa_switch *ds, int port,
1249 			    unsigned int mode,
1250 			    const struct phylink_link_state *state)
1251 {
1252 	struct b53_device *dev = ds->priv;
1253 
1254 	if (mode == MLO_AN_PHY)
1255 		return;
1256 
1257 	if (mode == MLO_AN_FIXED) {
1258 		b53_force_port_config(dev, port, state->speed,
1259 				      state->duplex, state->pause);
1260 		return;
1261 	}
1262 
1263 	if ((phy_interface_mode_is_8023z(state->interface) ||
1264 	     state->interface == PHY_INTERFACE_MODE_SGMII) &&
1265 	     dev->ops->serdes_config)
1266 		dev->ops->serdes_config(dev, port, mode, state);
1267 }
1268 EXPORT_SYMBOL(b53_phylink_mac_config);
1269 
1270 void b53_phylink_mac_an_restart(struct dsa_switch *ds, int port)
1271 {
1272 	struct b53_device *dev = ds->priv;
1273 
1274 	if (dev->ops->serdes_an_restart)
1275 		dev->ops->serdes_an_restart(dev, port);
1276 }
1277 EXPORT_SYMBOL(b53_phylink_mac_an_restart);
1278 
1279 void b53_phylink_mac_link_down(struct dsa_switch *ds, int port,
1280 			       unsigned int mode,
1281 			       phy_interface_t interface)
1282 {
1283 	struct b53_device *dev = ds->priv;
1284 
1285 	if (mode == MLO_AN_PHY)
1286 		return;
1287 
1288 	if (mode == MLO_AN_FIXED) {
1289 		b53_force_link(dev, port, false);
1290 		return;
1291 	}
1292 
1293 	if (phy_interface_mode_is_8023z(interface) &&
1294 	    dev->ops->serdes_link_set)
1295 		dev->ops->serdes_link_set(dev, port, mode, interface, false);
1296 }
1297 EXPORT_SYMBOL(b53_phylink_mac_link_down);
1298 
1299 void b53_phylink_mac_link_up(struct dsa_switch *ds, int port,
1300 			     unsigned int mode,
1301 			     phy_interface_t interface,
1302 			     struct phy_device *phydev,
1303 			     int speed, int duplex,
1304 			     bool tx_pause, bool rx_pause)
1305 {
1306 	struct b53_device *dev = ds->priv;
1307 
1308 	if (mode == MLO_AN_PHY)
1309 		return;
1310 
1311 	if (mode == MLO_AN_FIXED) {
1312 		b53_force_link(dev, port, true);
1313 		return;
1314 	}
1315 
1316 	if (phy_interface_mode_is_8023z(interface) &&
1317 	    dev->ops->serdes_link_set)
1318 		dev->ops->serdes_link_set(dev, port, mode, interface, true);
1319 }
1320 EXPORT_SYMBOL(b53_phylink_mac_link_up);
1321 
1322 int b53_vlan_filtering(struct dsa_switch *ds, int port, bool vlan_filtering)
1323 {
1324 	struct b53_device *dev = ds->priv;
1325 	u16 pvid, new_pvid;
1326 
1327 	b53_read16(dev, B53_VLAN_PAGE, B53_VLAN_PORT_DEF_TAG(port), &pvid);
1328 	new_pvid = pvid;
1329 	if (!vlan_filtering) {
1330 		/* Filtering is currently enabled, use the default PVID since
1331 		 * the bridge does not expect tagging anymore
1332 		 */
1333 		dev->ports[port].pvid = pvid;
1334 		new_pvid = b53_default_pvid(dev);
1335 	} else {
1336 		/* Filtering is currently disabled, restore the previous PVID */
1337 		new_pvid = dev->ports[port].pvid;
1338 	}
1339 
1340 	if (pvid != new_pvid)
1341 		b53_write16(dev, B53_VLAN_PAGE, B53_VLAN_PORT_DEF_TAG(port),
1342 			    new_pvid);
1343 
1344 	b53_enable_vlan(dev, dev->vlan_enabled, vlan_filtering);
1345 
1346 	return 0;
1347 }
1348 EXPORT_SYMBOL(b53_vlan_filtering);
1349 
1350 int b53_vlan_prepare(struct dsa_switch *ds, int port,
1351 		     const struct switchdev_obj_port_vlan *vlan)
1352 {
1353 	struct b53_device *dev = ds->priv;
1354 
1355 	if ((is5325(dev) || is5365(dev)) && vlan->vid_begin == 0)
1356 		return -EOPNOTSUPP;
1357 
1358 	/* Port 7 on 7278 connects to the ASP's UniMAC which is not capable of
1359 	 * receiving VLAN tagged frames at all, we can still allow the port to
1360 	 * be configured for egress untagged.
1361 	 */
1362 	if (dev->chip_id == BCM7278_DEVICE_ID && port == 7 &&
1363 	    !(vlan->flags & BRIDGE_VLAN_INFO_UNTAGGED))
1364 		return -EINVAL;
1365 
1366 	if (vlan->vid_end > dev->num_vlans)
1367 		return -ERANGE;
1368 
1369 	b53_enable_vlan(dev, true, ds->vlan_filtering);
1370 
1371 	return 0;
1372 }
1373 EXPORT_SYMBOL(b53_vlan_prepare);
1374 
1375 void b53_vlan_add(struct dsa_switch *ds, int port,
1376 		  const struct switchdev_obj_port_vlan *vlan)
1377 {
1378 	struct b53_device *dev = ds->priv;
1379 	bool untagged = vlan->flags & BRIDGE_VLAN_INFO_UNTAGGED;
1380 	bool pvid = vlan->flags & BRIDGE_VLAN_INFO_PVID;
1381 	struct b53_vlan *vl;
1382 	u16 vid;
1383 
1384 	for (vid = vlan->vid_begin; vid <= vlan->vid_end; ++vid) {
1385 		vl = &dev->vlans[vid];
1386 
1387 		b53_get_vlan_entry(dev, vid, vl);
1388 
1389 		if (vid == 0 && vid == b53_default_pvid(dev))
1390 			untagged = true;
1391 
1392 		vl->members |= BIT(port);
1393 		if (untagged && !dsa_is_cpu_port(ds, port))
1394 			vl->untag |= BIT(port);
1395 		else
1396 			vl->untag &= ~BIT(port);
1397 
1398 		b53_set_vlan_entry(dev, vid, vl);
1399 		b53_fast_age_vlan(dev, vid);
1400 	}
1401 
1402 	if (pvid && !dsa_is_cpu_port(ds, port)) {
1403 		b53_write16(dev, B53_VLAN_PAGE, B53_VLAN_PORT_DEF_TAG(port),
1404 			    vlan->vid_end);
1405 		b53_fast_age_vlan(dev, vid);
1406 	}
1407 }
1408 EXPORT_SYMBOL(b53_vlan_add);
1409 
1410 int b53_vlan_del(struct dsa_switch *ds, int port,
1411 		 const struct switchdev_obj_port_vlan *vlan)
1412 {
1413 	struct b53_device *dev = ds->priv;
1414 	bool untagged = vlan->flags & BRIDGE_VLAN_INFO_UNTAGGED;
1415 	struct b53_vlan *vl;
1416 	u16 vid;
1417 	u16 pvid;
1418 
1419 	b53_read16(dev, B53_VLAN_PAGE, B53_VLAN_PORT_DEF_TAG(port), &pvid);
1420 
1421 	for (vid = vlan->vid_begin; vid <= vlan->vid_end; ++vid) {
1422 		vl = &dev->vlans[vid];
1423 
1424 		b53_get_vlan_entry(dev, vid, vl);
1425 
1426 		vl->members &= ~BIT(port);
1427 
1428 		if (pvid == vid)
1429 			pvid = b53_default_pvid(dev);
1430 
1431 		if (untagged && !dsa_is_cpu_port(ds, port))
1432 			vl->untag &= ~(BIT(port));
1433 
1434 		b53_set_vlan_entry(dev, vid, vl);
1435 		b53_fast_age_vlan(dev, vid);
1436 	}
1437 
1438 	b53_write16(dev, B53_VLAN_PAGE, B53_VLAN_PORT_DEF_TAG(port), pvid);
1439 	b53_fast_age_vlan(dev, pvid);
1440 
1441 	return 0;
1442 }
1443 EXPORT_SYMBOL(b53_vlan_del);
1444 
1445 /* Address Resolution Logic routines */
1446 static int b53_arl_op_wait(struct b53_device *dev)
1447 {
1448 	unsigned int timeout = 10;
1449 	u8 reg;
1450 
1451 	do {
1452 		b53_read8(dev, B53_ARLIO_PAGE, B53_ARLTBL_RW_CTRL, &reg);
1453 		if (!(reg & ARLTBL_START_DONE))
1454 			return 0;
1455 
1456 		usleep_range(1000, 2000);
1457 	} while (timeout--);
1458 
1459 	dev_warn(dev->dev, "timeout waiting for ARL to finish: 0x%02x\n", reg);
1460 
1461 	return -ETIMEDOUT;
1462 }
1463 
1464 static int b53_arl_rw_op(struct b53_device *dev, unsigned int op)
1465 {
1466 	u8 reg;
1467 
1468 	if (op > ARLTBL_RW)
1469 		return -EINVAL;
1470 
1471 	b53_read8(dev, B53_ARLIO_PAGE, B53_ARLTBL_RW_CTRL, &reg);
1472 	reg |= ARLTBL_START_DONE;
1473 	if (op)
1474 		reg |= ARLTBL_RW;
1475 	else
1476 		reg &= ~ARLTBL_RW;
1477 	b53_write8(dev, B53_ARLIO_PAGE, B53_ARLTBL_RW_CTRL, reg);
1478 
1479 	return b53_arl_op_wait(dev);
1480 }
1481 
1482 static int b53_arl_read(struct b53_device *dev, u64 mac,
1483 			u16 vid, struct b53_arl_entry *ent, u8 *idx,
1484 			bool is_valid)
1485 {
1486 	unsigned int i;
1487 	int ret;
1488 
1489 	ret = b53_arl_op_wait(dev);
1490 	if (ret)
1491 		return ret;
1492 
1493 	/* Read the bins */
1494 	for (i = 0; i < dev->num_arl_entries; i++) {
1495 		u64 mac_vid;
1496 		u32 fwd_entry;
1497 
1498 		b53_read64(dev, B53_ARLIO_PAGE,
1499 			   B53_ARLTBL_MAC_VID_ENTRY(i), &mac_vid);
1500 		b53_read32(dev, B53_ARLIO_PAGE,
1501 			   B53_ARLTBL_DATA_ENTRY(i), &fwd_entry);
1502 		b53_arl_to_entry(ent, mac_vid, fwd_entry);
1503 
1504 		if (!(fwd_entry & ARLTBL_VALID))
1505 			continue;
1506 		if ((mac_vid & ARLTBL_MAC_MASK) != mac)
1507 			continue;
1508 		*idx = i;
1509 	}
1510 
1511 	return -ENOENT;
1512 }
1513 
1514 static int b53_arl_op(struct b53_device *dev, int op, int port,
1515 		      const unsigned char *addr, u16 vid, bool is_valid)
1516 {
1517 	struct b53_arl_entry ent;
1518 	u32 fwd_entry;
1519 	u64 mac, mac_vid = 0;
1520 	u8 idx = 0;
1521 	int ret;
1522 
1523 	/* Convert the array into a 64-bit MAC */
1524 	mac = ether_addr_to_u64(addr);
1525 
1526 	/* Perform a read for the given MAC and VID */
1527 	b53_write48(dev, B53_ARLIO_PAGE, B53_MAC_ADDR_IDX, mac);
1528 	b53_write16(dev, B53_ARLIO_PAGE, B53_VLAN_ID_IDX, vid);
1529 
1530 	/* Issue a read operation for this MAC */
1531 	ret = b53_arl_rw_op(dev, 1);
1532 	if (ret)
1533 		return ret;
1534 
1535 	ret = b53_arl_read(dev, mac, vid, &ent, &idx, is_valid);
1536 	/* If this is a read, just finish now */
1537 	if (op)
1538 		return ret;
1539 
1540 	/* We could not find a matching MAC, so reset to a new entry */
1541 	if (ret) {
1542 		fwd_entry = 0;
1543 		idx = 1;
1544 	}
1545 
1546 	/* For multicast address, the port is a bitmask and the validity
1547 	 * is determined by having at least one port being still active
1548 	 */
1549 	if (!is_multicast_ether_addr(addr)) {
1550 		ent.port = port;
1551 		ent.is_valid = is_valid;
1552 	} else {
1553 		if (is_valid)
1554 			ent.port |= BIT(port);
1555 		else
1556 			ent.port &= ~BIT(port);
1557 
1558 		ent.is_valid = !!(ent.port);
1559 	}
1560 
1561 	ent.is_valid = is_valid;
1562 	ent.vid = vid;
1563 	ent.is_static = true;
1564 	ent.is_age = false;
1565 	memcpy(ent.mac, addr, ETH_ALEN);
1566 	b53_arl_from_entry(&mac_vid, &fwd_entry, &ent);
1567 
1568 	b53_write64(dev, B53_ARLIO_PAGE,
1569 		    B53_ARLTBL_MAC_VID_ENTRY(idx), mac_vid);
1570 	b53_write32(dev, B53_ARLIO_PAGE,
1571 		    B53_ARLTBL_DATA_ENTRY(idx), fwd_entry);
1572 
1573 	return b53_arl_rw_op(dev, 0);
1574 }
1575 
1576 int b53_fdb_add(struct dsa_switch *ds, int port,
1577 		const unsigned char *addr, u16 vid)
1578 {
1579 	struct b53_device *priv = ds->priv;
1580 
1581 	/* 5325 and 5365 require some more massaging, but could
1582 	 * be supported eventually
1583 	 */
1584 	if (is5325(priv) || is5365(priv))
1585 		return -EOPNOTSUPP;
1586 
1587 	return b53_arl_op(priv, 0, port, addr, vid, true);
1588 }
1589 EXPORT_SYMBOL(b53_fdb_add);
1590 
1591 int b53_fdb_del(struct dsa_switch *ds, int port,
1592 		const unsigned char *addr, u16 vid)
1593 {
1594 	struct b53_device *priv = ds->priv;
1595 
1596 	return b53_arl_op(priv, 0, port, addr, vid, false);
1597 }
1598 EXPORT_SYMBOL(b53_fdb_del);
1599 
1600 static int b53_arl_search_wait(struct b53_device *dev)
1601 {
1602 	unsigned int timeout = 1000;
1603 	u8 reg;
1604 
1605 	do {
1606 		b53_read8(dev, B53_ARLIO_PAGE, B53_ARL_SRCH_CTL, &reg);
1607 		if (!(reg & ARL_SRCH_STDN))
1608 			return 0;
1609 
1610 		if (reg & ARL_SRCH_VLID)
1611 			return 0;
1612 
1613 		usleep_range(1000, 2000);
1614 	} while (timeout--);
1615 
1616 	return -ETIMEDOUT;
1617 }
1618 
1619 static void b53_arl_search_rd(struct b53_device *dev, u8 idx,
1620 			      struct b53_arl_entry *ent)
1621 {
1622 	u64 mac_vid;
1623 	u32 fwd_entry;
1624 
1625 	b53_read64(dev, B53_ARLIO_PAGE,
1626 		   B53_ARL_SRCH_RSTL_MACVID(idx), &mac_vid);
1627 	b53_read32(dev, B53_ARLIO_PAGE,
1628 		   B53_ARL_SRCH_RSTL(idx), &fwd_entry);
1629 	b53_arl_to_entry(ent, mac_vid, fwd_entry);
1630 }
1631 
1632 static int b53_fdb_copy(int port, const struct b53_arl_entry *ent,
1633 			dsa_fdb_dump_cb_t *cb, void *data)
1634 {
1635 	if (!ent->is_valid)
1636 		return 0;
1637 
1638 	if (port != ent->port)
1639 		return 0;
1640 
1641 	return cb(ent->mac, ent->vid, ent->is_static, data);
1642 }
1643 
1644 int b53_fdb_dump(struct dsa_switch *ds, int port,
1645 		 dsa_fdb_dump_cb_t *cb, void *data)
1646 {
1647 	struct b53_device *priv = ds->priv;
1648 	struct b53_arl_entry results[2];
1649 	unsigned int count = 0;
1650 	int ret;
1651 	u8 reg;
1652 
1653 	/* Start search operation */
1654 	reg = ARL_SRCH_STDN;
1655 	b53_write8(priv, B53_ARLIO_PAGE, B53_ARL_SRCH_CTL, reg);
1656 
1657 	do {
1658 		ret = b53_arl_search_wait(priv);
1659 		if (ret)
1660 			return ret;
1661 
1662 		b53_arl_search_rd(priv, 0, &results[0]);
1663 		ret = b53_fdb_copy(port, &results[0], cb, data);
1664 		if (ret)
1665 			return ret;
1666 
1667 		if (priv->num_arl_entries > 2) {
1668 			b53_arl_search_rd(priv, 1, &results[1]);
1669 			ret = b53_fdb_copy(port, &results[1], cb, data);
1670 			if (ret)
1671 				return ret;
1672 
1673 			if (!results[0].is_valid && !results[1].is_valid)
1674 				break;
1675 		}
1676 
1677 	} while (count++ < 1024);
1678 
1679 	return 0;
1680 }
1681 EXPORT_SYMBOL(b53_fdb_dump);
1682 
1683 int b53_mdb_prepare(struct dsa_switch *ds, int port,
1684 		    const struct switchdev_obj_port_mdb *mdb)
1685 {
1686 	struct b53_device *priv = ds->priv;
1687 
1688 	/* 5325 and 5365 require some more massaging, but could
1689 	 * be supported eventually
1690 	 */
1691 	if (is5325(priv) || is5365(priv))
1692 		return -EOPNOTSUPP;
1693 
1694 	return 0;
1695 }
1696 EXPORT_SYMBOL(b53_mdb_prepare);
1697 
1698 void b53_mdb_add(struct dsa_switch *ds, int port,
1699 		 const struct switchdev_obj_port_mdb *mdb)
1700 {
1701 	struct b53_device *priv = ds->priv;
1702 	int ret;
1703 
1704 	ret = b53_arl_op(priv, 0, port, mdb->addr, mdb->vid, true);
1705 	if (ret)
1706 		dev_err(ds->dev, "failed to add MDB entry\n");
1707 }
1708 EXPORT_SYMBOL(b53_mdb_add);
1709 
1710 int b53_mdb_del(struct dsa_switch *ds, int port,
1711 		const struct switchdev_obj_port_mdb *mdb)
1712 {
1713 	struct b53_device *priv = ds->priv;
1714 	int ret;
1715 
1716 	ret = b53_arl_op(priv, 0, port, mdb->addr, mdb->vid, false);
1717 	if (ret)
1718 		dev_err(ds->dev, "failed to delete MDB entry\n");
1719 
1720 	return ret;
1721 }
1722 EXPORT_SYMBOL(b53_mdb_del);
1723 
1724 int b53_br_join(struct dsa_switch *ds, int port, struct net_device *br)
1725 {
1726 	struct b53_device *dev = ds->priv;
1727 	s8 cpu_port = dsa_to_port(ds, port)->cpu_dp->index;
1728 	u16 pvlan, reg;
1729 	unsigned int i;
1730 
1731 	/* On 7278, port 7 which connects to the ASP should only receive
1732 	 * traffic from matching CFP rules.
1733 	 */
1734 	if (dev->chip_id == BCM7278_DEVICE_ID && port == 7)
1735 		return -EINVAL;
1736 
1737 	/* Make this port leave the all VLANs join since we will have proper
1738 	 * VLAN entries from now on
1739 	 */
1740 	if (is58xx(dev)) {
1741 		b53_read16(dev, B53_VLAN_PAGE, B53_JOIN_ALL_VLAN_EN, &reg);
1742 		reg &= ~BIT(port);
1743 		if ((reg & BIT(cpu_port)) == BIT(cpu_port))
1744 			reg &= ~BIT(cpu_port);
1745 		b53_write16(dev, B53_VLAN_PAGE, B53_JOIN_ALL_VLAN_EN, reg);
1746 	}
1747 
1748 	b53_read16(dev, B53_PVLAN_PAGE, B53_PVLAN_PORT_MASK(port), &pvlan);
1749 
1750 	b53_for_each_port(dev, i) {
1751 		if (dsa_to_port(ds, i)->bridge_dev != br)
1752 			continue;
1753 
1754 		/* Add this local port to the remote port VLAN control
1755 		 * membership and update the remote port bitmask
1756 		 */
1757 		b53_read16(dev, B53_PVLAN_PAGE, B53_PVLAN_PORT_MASK(i), &reg);
1758 		reg |= BIT(port);
1759 		b53_write16(dev, B53_PVLAN_PAGE, B53_PVLAN_PORT_MASK(i), reg);
1760 		dev->ports[i].vlan_ctl_mask = reg;
1761 
1762 		pvlan |= BIT(i);
1763 	}
1764 
1765 	/* Configure the local port VLAN control membership to include
1766 	 * remote ports and update the local port bitmask
1767 	 */
1768 	b53_write16(dev, B53_PVLAN_PAGE, B53_PVLAN_PORT_MASK(port), pvlan);
1769 	dev->ports[port].vlan_ctl_mask = pvlan;
1770 
1771 	return 0;
1772 }
1773 EXPORT_SYMBOL(b53_br_join);
1774 
1775 void b53_br_leave(struct dsa_switch *ds, int port, struct net_device *br)
1776 {
1777 	struct b53_device *dev = ds->priv;
1778 	struct b53_vlan *vl = &dev->vlans[0];
1779 	s8 cpu_port = dsa_to_port(ds, port)->cpu_dp->index;
1780 	unsigned int i;
1781 	u16 pvlan, reg, pvid;
1782 
1783 	b53_read16(dev, B53_PVLAN_PAGE, B53_PVLAN_PORT_MASK(port), &pvlan);
1784 
1785 	b53_for_each_port(dev, i) {
1786 		/* Don't touch the remaining ports */
1787 		if (dsa_to_port(ds, i)->bridge_dev != br)
1788 			continue;
1789 
1790 		b53_read16(dev, B53_PVLAN_PAGE, B53_PVLAN_PORT_MASK(i), &reg);
1791 		reg &= ~BIT(port);
1792 		b53_write16(dev, B53_PVLAN_PAGE, B53_PVLAN_PORT_MASK(i), reg);
1793 		dev->ports[port].vlan_ctl_mask = reg;
1794 
1795 		/* Prevent self removal to preserve isolation */
1796 		if (port != i)
1797 			pvlan &= ~BIT(i);
1798 	}
1799 
1800 	b53_write16(dev, B53_PVLAN_PAGE, B53_PVLAN_PORT_MASK(port), pvlan);
1801 	dev->ports[port].vlan_ctl_mask = pvlan;
1802 
1803 	pvid = b53_default_pvid(dev);
1804 
1805 	/* Make this port join all VLANs without VLAN entries */
1806 	if (is58xx(dev)) {
1807 		b53_read16(dev, B53_VLAN_PAGE, B53_JOIN_ALL_VLAN_EN, &reg);
1808 		reg |= BIT(port);
1809 		if (!(reg & BIT(cpu_port)))
1810 			reg |= BIT(cpu_port);
1811 		b53_write16(dev, B53_VLAN_PAGE, B53_JOIN_ALL_VLAN_EN, reg);
1812 	} else {
1813 		b53_get_vlan_entry(dev, pvid, vl);
1814 		vl->members |= BIT(port) | BIT(cpu_port);
1815 		vl->untag |= BIT(port) | BIT(cpu_port);
1816 		b53_set_vlan_entry(dev, pvid, vl);
1817 	}
1818 }
1819 EXPORT_SYMBOL(b53_br_leave);
1820 
1821 void b53_br_set_stp_state(struct dsa_switch *ds, int port, u8 state)
1822 {
1823 	struct b53_device *dev = ds->priv;
1824 	u8 hw_state;
1825 	u8 reg;
1826 
1827 	switch (state) {
1828 	case BR_STATE_DISABLED:
1829 		hw_state = PORT_CTRL_DIS_STATE;
1830 		break;
1831 	case BR_STATE_LISTENING:
1832 		hw_state = PORT_CTRL_LISTEN_STATE;
1833 		break;
1834 	case BR_STATE_LEARNING:
1835 		hw_state = PORT_CTRL_LEARN_STATE;
1836 		break;
1837 	case BR_STATE_FORWARDING:
1838 		hw_state = PORT_CTRL_FWD_STATE;
1839 		break;
1840 	case BR_STATE_BLOCKING:
1841 		hw_state = PORT_CTRL_BLOCK_STATE;
1842 		break;
1843 	default:
1844 		dev_err(ds->dev, "invalid STP state: %d\n", state);
1845 		return;
1846 	}
1847 
1848 	b53_read8(dev, B53_CTRL_PAGE, B53_PORT_CTRL(port), &reg);
1849 	reg &= ~PORT_CTRL_STP_STATE_MASK;
1850 	reg |= hw_state;
1851 	b53_write8(dev, B53_CTRL_PAGE, B53_PORT_CTRL(port), reg);
1852 }
1853 EXPORT_SYMBOL(b53_br_set_stp_state);
1854 
1855 void b53_br_fast_age(struct dsa_switch *ds, int port)
1856 {
1857 	struct b53_device *dev = ds->priv;
1858 
1859 	if (b53_fast_age_port(dev, port))
1860 		dev_err(ds->dev, "fast ageing failed\n");
1861 }
1862 EXPORT_SYMBOL(b53_br_fast_age);
1863 
1864 int b53_br_egress_floods(struct dsa_switch *ds, int port,
1865 			 bool unicast, bool multicast)
1866 {
1867 	struct b53_device *dev = ds->priv;
1868 	u16 uc, mc;
1869 
1870 	b53_read16(dev, B53_CTRL_PAGE, B53_UC_FLOOD_MASK, &uc);
1871 	if (unicast)
1872 		uc |= BIT(port);
1873 	else
1874 		uc &= ~BIT(port);
1875 	b53_write16(dev, B53_CTRL_PAGE, B53_UC_FLOOD_MASK, uc);
1876 
1877 	b53_read16(dev, B53_CTRL_PAGE, B53_MC_FLOOD_MASK, &mc);
1878 	if (multicast)
1879 		mc |= BIT(port);
1880 	else
1881 		mc &= ~BIT(port);
1882 	b53_write16(dev, B53_CTRL_PAGE, B53_MC_FLOOD_MASK, mc);
1883 
1884 	b53_read16(dev, B53_CTRL_PAGE, B53_IPMC_FLOOD_MASK, &mc);
1885 	if (multicast)
1886 		mc |= BIT(port);
1887 	else
1888 		mc &= ~BIT(port);
1889 	b53_write16(dev, B53_CTRL_PAGE, B53_IPMC_FLOOD_MASK, mc);
1890 
1891 	return 0;
1892 
1893 }
1894 EXPORT_SYMBOL(b53_br_egress_floods);
1895 
1896 static bool b53_possible_cpu_port(struct dsa_switch *ds, int port)
1897 {
1898 	/* Broadcom switches will accept enabling Broadcom tags on the
1899 	 * following ports: 5, 7 and 8, any other port is not supported
1900 	 */
1901 	switch (port) {
1902 	case B53_CPU_PORT_25:
1903 	case 7:
1904 	case B53_CPU_PORT:
1905 		return true;
1906 	}
1907 
1908 	return false;
1909 }
1910 
1911 static bool b53_can_enable_brcm_tags(struct dsa_switch *ds, int port,
1912 				     enum dsa_tag_protocol tag_protocol)
1913 {
1914 	bool ret = b53_possible_cpu_port(ds, port);
1915 
1916 	if (!ret) {
1917 		dev_warn(ds->dev, "Port %d is not Broadcom tag capable\n",
1918 			 port);
1919 		return ret;
1920 	}
1921 
1922 	switch (tag_protocol) {
1923 	case DSA_TAG_PROTO_BRCM:
1924 	case DSA_TAG_PROTO_BRCM_PREPEND:
1925 		dev_warn(ds->dev,
1926 			 "Port %d is stacked to Broadcom tag switch\n", port);
1927 		ret = false;
1928 		break;
1929 	default:
1930 		ret = true;
1931 		break;
1932 	}
1933 
1934 	return ret;
1935 }
1936 
1937 enum dsa_tag_protocol b53_get_tag_protocol(struct dsa_switch *ds, int port,
1938 					   enum dsa_tag_protocol mprot)
1939 {
1940 	struct b53_device *dev = ds->priv;
1941 
1942 	/* Older models (5325, 5365) support a different tag format that we do
1943 	 * not support in net/dsa/tag_brcm.c yet.
1944 	 */
1945 	if (is5325(dev) || is5365(dev) ||
1946 	    !b53_can_enable_brcm_tags(ds, port, mprot)) {
1947 		dev->tag_protocol = DSA_TAG_PROTO_NONE;
1948 		goto out;
1949 	}
1950 
1951 	/* Broadcom BCM58xx chips have a flow accelerator on Port 8
1952 	 * which requires us to use the prepended Broadcom tag type
1953 	 */
1954 	if (dev->chip_id == BCM58XX_DEVICE_ID && port == B53_CPU_PORT) {
1955 		dev->tag_protocol = DSA_TAG_PROTO_BRCM_PREPEND;
1956 		goto out;
1957 	}
1958 
1959 	dev->tag_protocol = DSA_TAG_PROTO_BRCM;
1960 out:
1961 	return dev->tag_protocol;
1962 }
1963 EXPORT_SYMBOL(b53_get_tag_protocol);
1964 
1965 int b53_mirror_add(struct dsa_switch *ds, int port,
1966 		   struct dsa_mall_mirror_tc_entry *mirror, bool ingress)
1967 {
1968 	struct b53_device *dev = ds->priv;
1969 	u16 reg, loc;
1970 
1971 	if (ingress)
1972 		loc = B53_IG_MIR_CTL;
1973 	else
1974 		loc = B53_EG_MIR_CTL;
1975 
1976 	b53_read16(dev, B53_MGMT_PAGE, loc, &reg);
1977 	reg |= BIT(port);
1978 	b53_write16(dev, B53_MGMT_PAGE, loc, reg);
1979 
1980 	b53_read16(dev, B53_MGMT_PAGE, B53_MIR_CAP_CTL, &reg);
1981 	reg &= ~CAP_PORT_MASK;
1982 	reg |= mirror->to_local_port;
1983 	reg |= MIRROR_EN;
1984 	b53_write16(dev, B53_MGMT_PAGE, B53_MIR_CAP_CTL, reg);
1985 
1986 	return 0;
1987 }
1988 EXPORT_SYMBOL(b53_mirror_add);
1989 
1990 void b53_mirror_del(struct dsa_switch *ds, int port,
1991 		    struct dsa_mall_mirror_tc_entry *mirror)
1992 {
1993 	struct b53_device *dev = ds->priv;
1994 	bool loc_disable = false, other_loc_disable = false;
1995 	u16 reg, loc;
1996 
1997 	if (mirror->ingress)
1998 		loc = B53_IG_MIR_CTL;
1999 	else
2000 		loc = B53_EG_MIR_CTL;
2001 
2002 	/* Update the desired ingress/egress register */
2003 	b53_read16(dev, B53_MGMT_PAGE, loc, &reg);
2004 	reg &= ~BIT(port);
2005 	if (!(reg & MIRROR_MASK))
2006 		loc_disable = true;
2007 	b53_write16(dev, B53_MGMT_PAGE, loc, reg);
2008 
2009 	/* Now look at the other one to know if we can disable mirroring
2010 	 * entirely
2011 	 */
2012 	if (mirror->ingress)
2013 		b53_read16(dev, B53_MGMT_PAGE, B53_EG_MIR_CTL, &reg);
2014 	else
2015 		b53_read16(dev, B53_MGMT_PAGE, B53_IG_MIR_CTL, &reg);
2016 	if (!(reg & MIRROR_MASK))
2017 		other_loc_disable = true;
2018 
2019 	b53_read16(dev, B53_MGMT_PAGE, B53_MIR_CAP_CTL, &reg);
2020 	/* Both no longer have ports, let's disable mirroring */
2021 	if (loc_disable && other_loc_disable) {
2022 		reg &= ~MIRROR_EN;
2023 		reg &= ~mirror->to_local_port;
2024 	}
2025 	b53_write16(dev, B53_MGMT_PAGE, B53_MIR_CAP_CTL, reg);
2026 }
2027 EXPORT_SYMBOL(b53_mirror_del);
2028 
2029 void b53_eee_enable_set(struct dsa_switch *ds, int port, bool enable)
2030 {
2031 	struct b53_device *dev = ds->priv;
2032 	u16 reg;
2033 
2034 	b53_read16(dev, B53_EEE_PAGE, B53_EEE_EN_CTRL, &reg);
2035 	if (enable)
2036 		reg |= BIT(port);
2037 	else
2038 		reg &= ~BIT(port);
2039 	b53_write16(dev, B53_EEE_PAGE, B53_EEE_EN_CTRL, reg);
2040 }
2041 EXPORT_SYMBOL(b53_eee_enable_set);
2042 
2043 
2044 /* Returns 0 if EEE was not enabled, or 1 otherwise
2045  */
2046 int b53_eee_init(struct dsa_switch *ds, int port, struct phy_device *phy)
2047 {
2048 	int ret;
2049 
2050 	ret = phy_init_eee(phy, 0);
2051 	if (ret)
2052 		return 0;
2053 
2054 	b53_eee_enable_set(ds, port, true);
2055 
2056 	return 1;
2057 }
2058 EXPORT_SYMBOL(b53_eee_init);
2059 
2060 int b53_get_mac_eee(struct dsa_switch *ds, int port, struct ethtool_eee *e)
2061 {
2062 	struct b53_device *dev = ds->priv;
2063 	struct ethtool_eee *p = &dev->ports[port].eee;
2064 	u16 reg;
2065 
2066 	if (is5325(dev) || is5365(dev))
2067 		return -EOPNOTSUPP;
2068 
2069 	b53_read16(dev, B53_EEE_PAGE, B53_EEE_LPI_INDICATE, &reg);
2070 	e->eee_enabled = p->eee_enabled;
2071 	e->eee_active = !!(reg & BIT(port));
2072 
2073 	return 0;
2074 }
2075 EXPORT_SYMBOL(b53_get_mac_eee);
2076 
2077 int b53_set_mac_eee(struct dsa_switch *ds, int port, struct ethtool_eee *e)
2078 {
2079 	struct b53_device *dev = ds->priv;
2080 	struct ethtool_eee *p = &dev->ports[port].eee;
2081 
2082 	if (is5325(dev) || is5365(dev))
2083 		return -EOPNOTSUPP;
2084 
2085 	p->eee_enabled = e->eee_enabled;
2086 	b53_eee_enable_set(ds, port, e->eee_enabled);
2087 
2088 	return 0;
2089 }
2090 EXPORT_SYMBOL(b53_set_mac_eee);
2091 
2092 static int b53_change_mtu(struct dsa_switch *ds, int port, int mtu)
2093 {
2094 	struct b53_device *dev = ds->priv;
2095 	bool enable_jumbo;
2096 	bool allow_10_100;
2097 
2098 	if (is5325(dev) || is5365(dev))
2099 		return -EOPNOTSUPP;
2100 
2101 	enable_jumbo = (mtu >= JMS_MIN_SIZE);
2102 	allow_10_100 = (dev->chip_id == BCM583XX_DEVICE_ID);
2103 
2104 	return b53_set_jumbo(dev, enable_jumbo, allow_10_100);
2105 }
2106 
2107 static int b53_get_max_mtu(struct dsa_switch *ds, int port)
2108 {
2109 	return JMS_MAX_SIZE;
2110 }
2111 
2112 static const struct dsa_switch_ops b53_switch_ops = {
2113 	.get_tag_protocol	= b53_get_tag_protocol,
2114 	.setup			= b53_setup,
2115 	.get_strings		= b53_get_strings,
2116 	.get_ethtool_stats	= b53_get_ethtool_stats,
2117 	.get_sset_count		= b53_get_sset_count,
2118 	.get_ethtool_phy_stats	= b53_get_ethtool_phy_stats,
2119 	.phy_read		= b53_phy_read16,
2120 	.phy_write		= b53_phy_write16,
2121 	.adjust_link		= b53_adjust_link,
2122 	.phylink_validate	= b53_phylink_validate,
2123 	.phylink_mac_link_state	= b53_phylink_mac_link_state,
2124 	.phylink_mac_config	= b53_phylink_mac_config,
2125 	.phylink_mac_an_restart	= b53_phylink_mac_an_restart,
2126 	.phylink_mac_link_down	= b53_phylink_mac_link_down,
2127 	.phylink_mac_link_up	= b53_phylink_mac_link_up,
2128 	.port_enable		= b53_enable_port,
2129 	.port_disable		= b53_disable_port,
2130 	.get_mac_eee		= b53_get_mac_eee,
2131 	.set_mac_eee		= b53_set_mac_eee,
2132 	.port_bridge_join	= b53_br_join,
2133 	.port_bridge_leave	= b53_br_leave,
2134 	.port_stp_state_set	= b53_br_set_stp_state,
2135 	.port_fast_age		= b53_br_fast_age,
2136 	.port_egress_floods	= b53_br_egress_floods,
2137 	.port_vlan_filtering	= b53_vlan_filtering,
2138 	.port_vlan_prepare	= b53_vlan_prepare,
2139 	.port_vlan_add		= b53_vlan_add,
2140 	.port_vlan_del		= b53_vlan_del,
2141 	.port_fdb_dump		= b53_fdb_dump,
2142 	.port_fdb_add		= b53_fdb_add,
2143 	.port_fdb_del		= b53_fdb_del,
2144 	.port_mirror_add	= b53_mirror_add,
2145 	.port_mirror_del	= b53_mirror_del,
2146 	.port_mdb_prepare	= b53_mdb_prepare,
2147 	.port_mdb_add		= b53_mdb_add,
2148 	.port_mdb_del		= b53_mdb_del,
2149 	.port_max_mtu		= b53_get_max_mtu,
2150 	.port_change_mtu	= b53_change_mtu,
2151 };
2152 
2153 struct b53_chip_data {
2154 	u32 chip_id;
2155 	const char *dev_name;
2156 	u16 vlans;
2157 	u16 enabled_ports;
2158 	u8 cpu_port;
2159 	u8 vta_regs[3];
2160 	u8 arl_entries;
2161 	u8 duplex_reg;
2162 	u8 jumbo_pm_reg;
2163 	u8 jumbo_size_reg;
2164 };
2165 
2166 #define B53_VTA_REGS	\
2167 	{ B53_VT_ACCESS, B53_VT_INDEX, B53_VT_ENTRY }
2168 #define B53_VTA_REGS_9798 \
2169 	{ B53_VT_ACCESS_9798, B53_VT_INDEX_9798, B53_VT_ENTRY_9798 }
2170 #define B53_VTA_REGS_63XX \
2171 	{ B53_VT_ACCESS_63XX, B53_VT_INDEX_63XX, B53_VT_ENTRY_63XX }
2172 
2173 static const struct b53_chip_data b53_switch_chips[] = {
2174 	{
2175 		.chip_id = BCM5325_DEVICE_ID,
2176 		.dev_name = "BCM5325",
2177 		.vlans = 16,
2178 		.enabled_ports = 0x1f,
2179 		.arl_entries = 2,
2180 		.cpu_port = B53_CPU_PORT_25,
2181 		.duplex_reg = B53_DUPLEX_STAT_FE,
2182 	},
2183 	{
2184 		.chip_id = BCM5365_DEVICE_ID,
2185 		.dev_name = "BCM5365",
2186 		.vlans = 256,
2187 		.enabled_ports = 0x1f,
2188 		.arl_entries = 2,
2189 		.cpu_port = B53_CPU_PORT_25,
2190 		.duplex_reg = B53_DUPLEX_STAT_FE,
2191 	},
2192 	{
2193 		.chip_id = BCM5389_DEVICE_ID,
2194 		.dev_name = "BCM5389",
2195 		.vlans = 4096,
2196 		.enabled_ports = 0x1f,
2197 		.arl_entries = 4,
2198 		.cpu_port = B53_CPU_PORT,
2199 		.vta_regs = B53_VTA_REGS,
2200 		.duplex_reg = B53_DUPLEX_STAT_GE,
2201 		.jumbo_pm_reg = B53_JUMBO_PORT_MASK,
2202 		.jumbo_size_reg = B53_JUMBO_MAX_SIZE,
2203 	},
2204 	{
2205 		.chip_id = BCM5395_DEVICE_ID,
2206 		.dev_name = "BCM5395",
2207 		.vlans = 4096,
2208 		.enabled_ports = 0x1f,
2209 		.arl_entries = 4,
2210 		.cpu_port = B53_CPU_PORT,
2211 		.vta_regs = B53_VTA_REGS,
2212 		.duplex_reg = B53_DUPLEX_STAT_GE,
2213 		.jumbo_pm_reg = B53_JUMBO_PORT_MASK,
2214 		.jumbo_size_reg = B53_JUMBO_MAX_SIZE,
2215 	},
2216 	{
2217 		.chip_id = BCM5397_DEVICE_ID,
2218 		.dev_name = "BCM5397",
2219 		.vlans = 4096,
2220 		.enabled_ports = 0x1f,
2221 		.arl_entries = 4,
2222 		.cpu_port = B53_CPU_PORT,
2223 		.vta_regs = B53_VTA_REGS_9798,
2224 		.duplex_reg = B53_DUPLEX_STAT_GE,
2225 		.jumbo_pm_reg = B53_JUMBO_PORT_MASK,
2226 		.jumbo_size_reg = B53_JUMBO_MAX_SIZE,
2227 	},
2228 	{
2229 		.chip_id = BCM5398_DEVICE_ID,
2230 		.dev_name = "BCM5398",
2231 		.vlans = 4096,
2232 		.enabled_ports = 0x7f,
2233 		.arl_entries = 4,
2234 		.cpu_port = B53_CPU_PORT,
2235 		.vta_regs = B53_VTA_REGS_9798,
2236 		.duplex_reg = B53_DUPLEX_STAT_GE,
2237 		.jumbo_pm_reg = B53_JUMBO_PORT_MASK,
2238 		.jumbo_size_reg = B53_JUMBO_MAX_SIZE,
2239 	},
2240 	{
2241 		.chip_id = BCM53115_DEVICE_ID,
2242 		.dev_name = "BCM53115",
2243 		.vlans = 4096,
2244 		.enabled_ports = 0x1f,
2245 		.arl_entries = 4,
2246 		.vta_regs = B53_VTA_REGS,
2247 		.cpu_port = B53_CPU_PORT,
2248 		.duplex_reg = B53_DUPLEX_STAT_GE,
2249 		.jumbo_pm_reg = B53_JUMBO_PORT_MASK,
2250 		.jumbo_size_reg = B53_JUMBO_MAX_SIZE,
2251 	},
2252 	{
2253 		.chip_id = BCM53125_DEVICE_ID,
2254 		.dev_name = "BCM53125",
2255 		.vlans = 4096,
2256 		.enabled_ports = 0xff,
2257 		.arl_entries = 4,
2258 		.cpu_port = B53_CPU_PORT,
2259 		.vta_regs = B53_VTA_REGS,
2260 		.duplex_reg = B53_DUPLEX_STAT_GE,
2261 		.jumbo_pm_reg = B53_JUMBO_PORT_MASK,
2262 		.jumbo_size_reg = B53_JUMBO_MAX_SIZE,
2263 	},
2264 	{
2265 		.chip_id = BCM53128_DEVICE_ID,
2266 		.dev_name = "BCM53128",
2267 		.vlans = 4096,
2268 		.enabled_ports = 0x1ff,
2269 		.arl_entries = 4,
2270 		.cpu_port = B53_CPU_PORT,
2271 		.vta_regs = B53_VTA_REGS,
2272 		.duplex_reg = B53_DUPLEX_STAT_GE,
2273 		.jumbo_pm_reg = B53_JUMBO_PORT_MASK,
2274 		.jumbo_size_reg = B53_JUMBO_MAX_SIZE,
2275 	},
2276 	{
2277 		.chip_id = BCM63XX_DEVICE_ID,
2278 		.dev_name = "BCM63xx",
2279 		.vlans = 4096,
2280 		.enabled_ports = 0, /* pdata must provide them */
2281 		.arl_entries = 4,
2282 		.cpu_port = B53_CPU_PORT,
2283 		.vta_regs = B53_VTA_REGS_63XX,
2284 		.duplex_reg = B53_DUPLEX_STAT_63XX,
2285 		.jumbo_pm_reg = B53_JUMBO_PORT_MASK_63XX,
2286 		.jumbo_size_reg = B53_JUMBO_MAX_SIZE_63XX,
2287 	},
2288 	{
2289 		.chip_id = BCM53010_DEVICE_ID,
2290 		.dev_name = "BCM53010",
2291 		.vlans = 4096,
2292 		.enabled_ports = 0x1f,
2293 		.arl_entries = 4,
2294 		.cpu_port = B53_CPU_PORT_25, /* TODO: auto detect */
2295 		.vta_regs = B53_VTA_REGS,
2296 		.duplex_reg = B53_DUPLEX_STAT_GE,
2297 		.jumbo_pm_reg = B53_JUMBO_PORT_MASK,
2298 		.jumbo_size_reg = B53_JUMBO_MAX_SIZE,
2299 	},
2300 	{
2301 		.chip_id = BCM53011_DEVICE_ID,
2302 		.dev_name = "BCM53011",
2303 		.vlans = 4096,
2304 		.enabled_ports = 0x1bf,
2305 		.arl_entries = 4,
2306 		.cpu_port = B53_CPU_PORT_25, /* TODO: auto detect */
2307 		.vta_regs = B53_VTA_REGS,
2308 		.duplex_reg = B53_DUPLEX_STAT_GE,
2309 		.jumbo_pm_reg = B53_JUMBO_PORT_MASK,
2310 		.jumbo_size_reg = B53_JUMBO_MAX_SIZE,
2311 	},
2312 	{
2313 		.chip_id = BCM53012_DEVICE_ID,
2314 		.dev_name = "BCM53012",
2315 		.vlans = 4096,
2316 		.enabled_ports = 0x1bf,
2317 		.arl_entries = 4,
2318 		.cpu_port = B53_CPU_PORT_25, /* TODO: auto detect */
2319 		.vta_regs = B53_VTA_REGS,
2320 		.duplex_reg = B53_DUPLEX_STAT_GE,
2321 		.jumbo_pm_reg = B53_JUMBO_PORT_MASK,
2322 		.jumbo_size_reg = B53_JUMBO_MAX_SIZE,
2323 	},
2324 	{
2325 		.chip_id = BCM53018_DEVICE_ID,
2326 		.dev_name = "BCM53018",
2327 		.vlans = 4096,
2328 		.enabled_ports = 0x1f,
2329 		.arl_entries = 4,
2330 		.cpu_port = B53_CPU_PORT_25, /* TODO: auto detect */
2331 		.vta_regs = B53_VTA_REGS,
2332 		.duplex_reg = B53_DUPLEX_STAT_GE,
2333 		.jumbo_pm_reg = B53_JUMBO_PORT_MASK,
2334 		.jumbo_size_reg = B53_JUMBO_MAX_SIZE,
2335 	},
2336 	{
2337 		.chip_id = BCM53019_DEVICE_ID,
2338 		.dev_name = "BCM53019",
2339 		.vlans = 4096,
2340 		.enabled_ports = 0x1f,
2341 		.arl_entries = 4,
2342 		.cpu_port = B53_CPU_PORT_25, /* TODO: auto detect */
2343 		.vta_regs = B53_VTA_REGS,
2344 		.duplex_reg = B53_DUPLEX_STAT_GE,
2345 		.jumbo_pm_reg = B53_JUMBO_PORT_MASK,
2346 		.jumbo_size_reg = B53_JUMBO_MAX_SIZE,
2347 	},
2348 	{
2349 		.chip_id = BCM58XX_DEVICE_ID,
2350 		.dev_name = "BCM585xx/586xx/88312",
2351 		.vlans	= 4096,
2352 		.enabled_ports = 0x1ff,
2353 		.arl_entries = 4,
2354 		.cpu_port = B53_CPU_PORT,
2355 		.vta_regs = B53_VTA_REGS,
2356 		.duplex_reg = B53_DUPLEX_STAT_GE,
2357 		.jumbo_pm_reg = B53_JUMBO_PORT_MASK,
2358 		.jumbo_size_reg = B53_JUMBO_MAX_SIZE,
2359 	},
2360 	{
2361 		.chip_id = BCM583XX_DEVICE_ID,
2362 		.dev_name = "BCM583xx/11360",
2363 		.vlans = 4096,
2364 		.enabled_ports = 0x103,
2365 		.arl_entries = 4,
2366 		.cpu_port = B53_CPU_PORT,
2367 		.vta_regs = B53_VTA_REGS,
2368 		.duplex_reg = B53_DUPLEX_STAT_GE,
2369 		.jumbo_pm_reg = B53_JUMBO_PORT_MASK,
2370 		.jumbo_size_reg = B53_JUMBO_MAX_SIZE,
2371 	},
2372 	{
2373 		.chip_id = BCM7445_DEVICE_ID,
2374 		.dev_name = "BCM7445",
2375 		.vlans	= 4096,
2376 		.enabled_ports = 0x1ff,
2377 		.arl_entries = 4,
2378 		.cpu_port = B53_CPU_PORT,
2379 		.vta_regs = B53_VTA_REGS,
2380 		.duplex_reg = B53_DUPLEX_STAT_GE,
2381 		.jumbo_pm_reg = B53_JUMBO_PORT_MASK,
2382 		.jumbo_size_reg = B53_JUMBO_MAX_SIZE,
2383 	},
2384 	{
2385 		.chip_id = BCM7278_DEVICE_ID,
2386 		.dev_name = "BCM7278",
2387 		.vlans = 4096,
2388 		.enabled_ports = 0x1ff,
2389 		.arl_entries= 4,
2390 		.cpu_port = B53_CPU_PORT,
2391 		.vta_regs = B53_VTA_REGS,
2392 		.duplex_reg = B53_DUPLEX_STAT_GE,
2393 		.jumbo_pm_reg = B53_JUMBO_PORT_MASK,
2394 		.jumbo_size_reg = B53_JUMBO_MAX_SIZE,
2395 	},
2396 };
2397 
2398 static int b53_switch_init(struct b53_device *dev)
2399 {
2400 	unsigned int i;
2401 	int ret;
2402 
2403 	for (i = 0; i < ARRAY_SIZE(b53_switch_chips); i++) {
2404 		const struct b53_chip_data *chip = &b53_switch_chips[i];
2405 
2406 		if (chip->chip_id == dev->chip_id) {
2407 			if (!dev->enabled_ports)
2408 				dev->enabled_ports = chip->enabled_ports;
2409 			dev->name = chip->dev_name;
2410 			dev->duplex_reg = chip->duplex_reg;
2411 			dev->vta_regs[0] = chip->vta_regs[0];
2412 			dev->vta_regs[1] = chip->vta_regs[1];
2413 			dev->vta_regs[2] = chip->vta_regs[2];
2414 			dev->jumbo_pm_reg = chip->jumbo_pm_reg;
2415 			dev->cpu_port = chip->cpu_port;
2416 			dev->num_vlans = chip->vlans;
2417 			dev->num_arl_entries = chip->arl_entries;
2418 			break;
2419 		}
2420 	}
2421 
2422 	/* check which BCM5325x version we have */
2423 	if (is5325(dev)) {
2424 		u8 vc4;
2425 
2426 		b53_read8(dev, B53_VLAN_PAGE, B53_VLAN_CTRL4_25, &vc4);
2427 
2428 		/* check reserved bits */
2429 		switch (vc4 & 3) {
2430 		case 1:
2431 			/* BCM5325E */
2432 			break;
2433 		case 3:
2434 			/* BCM5325F - do not use port 4 */
2435 			dev->enabled_ports &= ~BIT(4);
2436 			break;
2437 		default:
2438 /* On the BCM47XX SoCs this is the supported internal switch.*/
2439 #ifndef CONFIG_BCM47XX
2440 			/* BCM5325M */
2441 			return -EINVAL;
2442 #else
2443 			break;
2444 #endif
2445 		}
2446 	} else if (dev->chip_id == BCM53115_DEVICE_ID) {
2447 		u64 strap_value;
2448 
2449 		b53_read48(dev, B53_STAT_PAGE, B53_STRAP_VALUE, &strap_value);
2450 		/* use second IMP port if GMII is enabled */
2451 		if (strap_value & SV_GMII_CTRL_115)
2452 			dev->cpu_port = 5;
2453 	}
2454 
2455 	/* cpu port is always last */
2456 	dev->num_ports = dev->cpu_port + 1;
2457 	dev->enabled_ports |= BIT(dev->cpu_port);
2458 
2459 	/* Include non standard CPU port built-in PHYs to be probed */
2460 	if (is539x(dev) || is531x5(dev)) {
2461 		for (i = 0; i < dev->num_ports; i++) {
2462 			if (!(dev->ds->phys_mii_mask & BIT(i)) &&
2463 			    !b53_possible_cpu_port(dev->ds, i))
2464 				dev->ds->phys_mii_mask |= BIT(i);
2465 		}
2466 	}
2467 
2468 	dev->ports = devm_kcalloc(dev->dev,
2469 				  dev->num_ports, sizeof(struct b53_port),
2470 				  GFP_KERNEL);
2471 	if (!dev->ports)
2472 		return -ENOMEM;
2473 
2474 	dev->vlans = devm_kcalloc(dev->dev,
2475 				  dev->num_vlans, sizeof(struct b53_vlan),
2476 				  GFP_KERNEL);
2477 	if (!dev->vlans)
2478 		return -ENOMEM;
2479 
2480 	dev->reset_gpio = b53_switch_get_reset_gpio(dev);
2481 	if (dev->reset_gpio >= 0) {
2482 		ret = devm_gpio_request_one(dev->dev, dev->reset_gpio,
2483 					    GPIOF_OUT_INIT_HIGH, "robo_reset");
2484 		if (ret)
2485 			return ret;
2486 	}
2487 
2488 	return 0;
2489 }
2490 
2491 struct b53_device *b53_switch_alloc(struct device *base,
2492 				    const struct b53_io_ops *ops,
2493 				    void *priv)
2494 {
2495 	struct dsa_switch *ds;
2496 	struct b53_device *dev;
2497 
2498 	ds = devm_kzalloc(base, sizeof(*ds), GFP_KERNEL);
2499 	if (!ds)
2500 		return NULL;
2501 
2502 	ds->dev = base;
2503 	ds->num_ports = DSA_MAX_PORTS;
2504 
2505 	dev = devm_kzalloc(base, sizeof(*dev), GFP_KERNEL);
2506 	if (!dev)
2507 		return NULL;
2508 
2509 	ds->priv = dev;
2510 	dev->dev = base;
2511 
2512 	dev->ds = ds;
2513 	dev->priv = priv;
2514 	dev->ops = ops;
2515 	ds->ops = &b53_switch_ops;
2516 	mutex_init(&dev->reg_mutex);
2517 	mutex_init(&dev->stats_mutex);
2518 
2519 	return dev;
2520 }
2521 EXPORT_SYMBOL(b53_switch_alloc);
2522 
2523 int b53_switch_detect(struct b53_device *dev)
2524 {
2525 	u32 id32;
2526 	u16 tmp;
2527 	u8 id8;
2528 	int ret;
2529 
2530 	ret = b53_read8(dev, B53_MGMT_PAGE, B53_DEVICE_ID, &id8);
2531 	if (ret)
2532 		return ret;
2533 
2534 	switch (id8) {
2535 	case 0:
2536 		/* BCM5325 and BCM5365 do not have this register so reads
2537 		 * return 0. But the read operation did succeed, so assume this
2538 		 * is one of them.
2539 		 *
2540 		 * Next check if we can write to the 5325's VTA register; for
2541 		 * 5365 it is read only.
2542 		 */
2543 		b53_write16(dev, B53_VLAN_PAGE, B53_VLAN_TABLE_ACCESS_25, 0xf);
2544 		b53_read16(dev, B53_VLAN_PAGE, B53_VLAN_TABLE_ACCESS_25, &tmp);
2545 
2546 		if (tmp == 0xf)
2547 			dev->chip_id = BCM5325_DEVICE_ID;
2548 		else
2549 			dev->chip_id = BCM5365_DEVICE_ID;
2550 		break;
2551 	case BCM5389_DEVICE_ID:
2552 	case BCM5395_DEVICE_ID:
2553 	case BCM5397_DEVICE_ID:
2554 	case BCM5398_DEVICE_ID:
2555 		dev->chip_id = id8;
2556 		break;
2557 	default:
2558 		ret = b53_read32(dev, B53_MGMT_PAGE, B53_DEVICE_ID, &id32);
2559 		if (ret)
2560 			return ret;
2561 
2562 		switch (id32) {
2563 		case BCM53115_DEVICE_ID:
2564 		case BCM53125_DEVICE_ID:
2565 		case BCM53128_DEVICE_ID:
2566 		case BCM53010_DEVICE_ID:
2567 		case BCM53011_DEVICE_ID:
2568 		case BCM53012_DEVICE_ID:
2569 		case BCM53018_DEVICE_ID:
2570 		case BCM53019_DEVICE_ID:
2571 			dev->chip_id = id32;
2572 			break;
2573 		default:
2574 			pr_err("unsupported switch detected (BCM53%02x/BCM%x)\n",
2575 			       id8, id32);
2576 			return -ENODEV;
2577 		}
2578 	}
2579 
2580 	if (dev->chip_id == BCM5325_DEVICE_ID)
2581 		return b53_read8(dev, B53_STAT_PAGE, B53_REV_ID_25,
2582 				 &dev->core_rev);
2583 	else
2584 		return b53_read8(dev, B53_MGMT_PAGE, B53_REV_ID,
2585 				 &dev->core_rev);
2586 }
2587 EXPORT_SYMBOL(b53_switch_detect);
2588 
2589 int b53_switch_register(struct b53_device *dev)
2590 {
2591 	int ret;
2592 
2593 	if (dev->pdata) {
2594 		dev->chip_id = dev->pdata->chip_id;
2595 		dev->enabled_ports = dev->pdata->enabled_ports;
2596 	}
2597 
2598 	if (!dev->chip_id && b53_switch_detect(dev))
2599 		return -EINVAL;
2600 
2601 	ret = b53_switch_init(dev);
2602 	if (ret)
2603 		return ret;
2604 
2605 	pr_info("found switch: %s, rev %i\n", dev->name, dev->core_rev);
2606 
2607 	return dsa_register_switch(dev->ds);
2608 }
2609 EXPORT_SYMBOL(b53_switch_register);
2610 
2611 MODULE_AUTHOR("Jonas Gorski <jogo@openwrt.org>");
2612 MODULE_DESCRIPTION("B53 switch library");
2613 MODULE_LICENSE("Dual BSD/GPL");
2614