1 /* 2 * B53 switch driver main logic 3 * 4 * Copyright (C) 2011-2013 Jonas Gorski <jogo@openwrt.org> 5 * Copyright (C) 2016 Florian Fainelli <f.fainelli@gmail.com> 6 * 7 * Permission to use, copy, modify, and/or distribute this software for any 8 * purpose with or without fee is hereby granted, provided that the above 9 * copyright notice and this permission notice appear in all copies. 10 * 11 * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES 12 * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF 13 * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR 14 * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES 15 * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN 16 * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF 17 * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE. 18 */ 19 20 #define pr_fmt(fmt) KBUILD_MODNAME ": " fmt 21 22 #include <linux/delay.h> 23 #include <linux/export.h> 24 #include <linux/gpio.h> 25 #include <linux/kernel.h> 26 #include <linux/module.h> 27 #include <linux/platform_data/b53.h> 28 #include <linux/phy.h> 29 #include <linux/phylink.h> 30 #include <linux/etherdevice.h> 31 #include <linux/if_bridge.h> 32 #include <net/dsa.h> 33 34 #include "b53_regs.h" 35 #include "b53_priv.h" 36 37 struct b53_mib_desc { 38 u8 size; 39 u8 offset; 40 const char *name; 41 }; 42 43 /* BCM5365 MIB counters */ 44 static const struct b53_mib_desc b53_mibs_65[] = { 45 { 8, 0x00, "TxOctets" }, 46 { 4, 0x08, "TxDropPkts" }, 47 { 4, 0x10, "TxBroadcastPkts" }, 48 { 4, 0x14, "TxMulticastPkts" }, 49 { 4, 0x18, "TxUnicastPkts" }, 50 { 4, 0x1c, "TxCollisions" }, 51 { 4, 0x20, "TxSingleCollision" }, 52 { 4, 0x24, "TxMultipleCollision" }, 53 { 4, 0x28, "TxDeferredTransmit" }, 54 { 4, 0x2c, "TxLateCollision" }, 55 { 4, 0x30, "TxExcessiveCollision" }, 56 { 4, 0x38, "TxPausePkts" }, 57 { 8, 0x44, "RxOctets" }, 58 { 4, 0x4c, "RxUndersizePkts" }, 59 { 4, 0x50, "RxPausePkts" }, 60 { 4, 0x54, "Pkts64Octets" }, 61 { 4, 0x58, "Pkts65to127Octets" }, 62 { 4, 0x5c, "Pkts128to255Octets" }, 63 { 4, 0x60, "Pkts256to511Octets" }, 64 { 4, 0x64, "Pkts512to1023Octets" }, 65 { 4, 0x68, "Pkts1024to1522Octets" }, 66 { 4, 0x6c, "RxOversizePkts" }, 67 { 4, 0x70, "RxJabbers" }, 68 { 4, 0x74, "RxAlignmentErrors" }, 69 { 4, 0x78, "RxFCSErrors" }, 70 { 8, 0x7c, "RxGoodOctets" }, 71 { 4, 0x84, "RxDropPkts" }, 72 { 4, 0x88, "RxUnicastPkts" }, 73 { 4, 0x8c, "RxMulticastPkts" }, 74 { 4, 0x90, "RxBroadcastPkts" }, 75 { 4, 0x94, "RxSAChanges" }, 76 { 4, 0x98, "RxFragments" }, 77 }; 78 79 #define B53_MIBS_65_SIZE ARRAY_SIZE(b53_mibs_65) 80 81 /* BCM63xx MIB counters */ 82 static const struct b53_mib_desc b53_mibs_63xx[] = { 83 { 8, 0x00, "TxOctets" }, 84 { 4, 0x08, "TxDropPkts" }, 85 { 4, 0x0c, "TxQoSPkts" }, 86 { 4, 0x10, "TxBroadcastPkts" }, 87 { 4, 0x14, "TxMulticastPkts" }, 88 { 4, 0x18, "TxUnicastPkts" }, 89 { 4, 0x1c, "TxCollisions" }, 90 { 4, 0x20, "TxSingleCollision" }, 91 { 4, 0x24, "TxMultipleCollision" }, 92 { 4, 0x28, "TxDeferredTransmit" }, 93 { 4, 0x2c, "TxLateCollision" }, 94 { 4, 0x30, "TxExcessiveCollision" }, 95 { 4, 0x38, "TxPausePkts" }, 96 { 8, 0x3c, "TxQoSOctets" }, 97 { 8, 0x44, "RxOctets" }, 98 { 4, 0x4c, "RxUndersizePkts" }, 99 { 4, 0x50, "RxPausePkts" }, 100 { 4, 0x54, "Pkts64Octets" }, 101 { 4, 0x58, "Pkts65to127Octets" }, 102 { 4, 0x5c, "Pkts128to255Octets" }, 103 { 4, 0x60, "Pkts256to511Octets" }, 104 { 4, 0x64, "Pkts512to1023Octets" }, 105 { 4, 0x68, "Pkts1024to1522Octets" }, 106 { 4, 0x6c, "RxOversizePkts" }, 107 { 4, 0x70, "RxJabbers" }, 108 { 4, 0x74, "RxAlignmentErrors" }, 109 { 4, 0x78, "RxFCSErrors" }, 110 { 8, 0x7c, "RxGoodOctets" }, 111 { 4, 0x84, "RxDropPkts" }, 112 { 4, 0x88, "RxUnicastPkts" }, 113 { 4, 0x8c, "RxMulticastPkts" }, 114 { 4, 0x90, "RxBroadcastPkts" }, 115 { 4, 0x94, "RxSAChanges" }, 116 { 4, 0x98, "RxFragments" }, 117 { 4, 0xa0, "RxSymbolErrors" }, 118 { 4, 0xa4, "RxQoSPkts" }, 119 { 8, 0xa8, "RxQoSOctets" }, 120 { 4, 0xb0, "Pkts1523to2047Octets" }, 121 { 4, 0xb4, "Pkts2048to4095Octets" }, 122 { 4, 0xb8, "Pkts4096to8191Octets" }, 123 { 4, 0xbc, "Pkts8192to9728Octets" }, 124 { 4, 0xc0, "RxDiscarded" }, 125 }; 126 127 #define B53_MIBS_63XX_SIZE ARRAY_SIZE(b53_mibs_63xx) 128 129 /* MIB counters */ 130 static const struct b53_mib_desc b53_mibs[] = { 131 { 8, 0x00, "TxOctets" }, 132 { 4, 0x08, "TxDropPkts" }, 133 { 4, 0x10, "TxBroadcastPkts" }, 134 { 4, 0x14, "TxMulticastPkts" }, 135 { 4, 0x18, "TxUnicastPkts" }, 136 { 4, 0x1c, "TxCollisions" }, 137 { 4, 0x20, "TxSingleCollision" }, 138 { 4, 0x24, "TxMultipleCollision" }, 139 { 4, 0x28, "TxDeferredTransmit" }, 140 { 4, 0x2c, "TxLateCollision" }, 141 { 4, 0x30, "TxExcessiveCollision" }, 142 { 4, 0x38, "TxPausePkts" }, 143 { 8, 0x50, "RxOctets" }, 144 { 4, 0x58, "RxUndersizePkts" }, 145 { 4, 0x5c, "RxPausePkts" }, 146 { 4, 0x60, "Pkts64Octets" }, 147 { 4, 0x64, "Pkts65to127Octets" }, 148 { 4, 0x68, "Pkts128to255Octets" }, 149 { 4, 0x6c, "Pkts256to511Octets" }, 150 { 4, 0x70, "Pkts512to1023Octets" }, 151 { 4, 0x74, "Pkts1024to1522Octets" }, 152 { 4, 0x78, "RxOversizePkts" }, 153 { 4, 0x7c, "RxJabbers" }, 154 { 4, 0x80, "RxAlignmentErrors" }, 155 { 4, 0x84, "RxFCSErrors" }, 156 { 8, 0x88, "RxGoodOctets" }, 157 { 4, 0x90, "RxDropPkts" }, 158 { 4, 0x94, "RxUnicastPkts" }, 159 { 4, 0x98, "RxMulticastPkts" }, 160 { 4, 0x9c, "RxBroadcastPkts" }, 161 { 4, 0xa0, "RxSAChanges" }, 162 { 4, 0xa4, "RxFragments" }, 163 { 4, 0xa8, "RxJumboPkts" }, 164 { 4, 0xac, "RxSymbolErrors" }, 165 { 4, 0xc0, "RxDiscarded" }, 166 }; 167 168 #define B53_MIBS_SIZE ARRAY_SIZE(b53_mibs) 169 170 static const struct b53_mib_desc b53_mibs_58xx[] = { 171 { 8, 0x00, "TxOctets" }, 172 { 4, 0x08, "TxDropPkts" }, 173 { 4, 0x0c, "TxQPKTQ0" }, 174 { 4, 0x10, "TxBroadcastPkts" }, 175 { 4, 0x14, "TxMulticastPkts" }, 176 { 4, 0x18, "TxUnicastPKts" }, 177 { 4, 0x1c, "TxCollisions" }, 178 { 4, 0x20, "TxSingleCollision" }, 179 { 4, 0x24, "TxMultipleCollision" }, 180 { 4, 0x28, "TxDeferredCollision" }, 181 { 4, 0x2c, "TxLateCollision" }, 182 { 4, 0x30, "TxExcessiveCollision" }, 183 { 4, 0x34, "TxFrameInDisc" }, 184 { 4, 0x38, "TxPausePkts" }, 185 { 4, 0x3c, "TxQPKTQ1" }, 186 { 4, 0x40, "TxQPKTQ2" }, 187 { 4, 0x44, "TxQPKTQ3" }, 188 { 4, 0x48, "TxQPKTQ4" }, 189 { 4, 0x4c, "TxQPKTQ5" }, 190 { 8, 0x50, "RxOctets" }, 191 { 4, 0x58, "RxUndersizePkts" }, 192 { 4, 0x5c, "RxPausePkts" }, 193 { 4, 0x60, "RxPkts64Octets" }, 194 { 4, 0x64, "RxPkts65to127Octets" }, 195 { 4, 0x68, "RxPkts128to255Octets" }, 196 { 4, 0x6c, "RxPkts256to511Octets" }, 197 { 4, 0x70, "RxPkts512to1023Octets" }, 198 { 4, 0x74, "RxPkts1024toMaxPktsOctets" }, 199 { 4, 0x78, "RxOversizePkts" }, 200 { 4, 0x7c, "RxJabbers" }, 201 { 4, 0x80, "RxAlignmentErrors" }, 202 { 4, 0x84, "RxFCSErrors" }, 203 { 8, 0x88, "RxGoodOctets" }, 204 { 4, 0x90, "RxDropPkts" }, 205 { 4, 0x94, "RxUnicastPkts" }, 206 { 4, 0x98, "RxMulticastPkts" }, 207 { 4, 0x9c, "RxBroadcastPkts" }, 208 { 4, 0xa0, "RxSAChanges" }, 209 { 4, 0xa4, "RxFragments" }, 210 { 4, 0xa8, "RxJumboPkt" }, 211 { 4, 0xac, "RxSymblErr" }, 212 { 4, 0xb0, "InRangeErrCount" }, 213 { 4, 0xb4, "OutRangeErrCount" }, 214 { 4, 0xb8, "EEELpiEvent" }, 215 { 4, 0xbc, "EEELpiDuration" }, 216 { 4, 0xc0, "RxDiscard" }, 217 { 4, 0xc8, "TxQPKTQ6" }, 218 { 4, 0xcc, "TxQPKTQ7" }, 219 { 4, 0xd0, "TxPkts64Octets" }, 220 { 4, 0xd4, "TxPkts65to127Octets" }, 221 { 4, 0xd8, "TxPkts128to255Octets" }, 222 { 4, 0xdc, "TxPkts256to511Ocets" }, 223 { 4, 0xe0, "TxPkts512to1023Ocets" }, 224 { 4, 0xe4, "TxPkts1024toMaxPktOcets" }, 225 }; 226 227 #define B53_MIBS_58XX_SIZE ARRAY_SIZE(b53_mibs_58xx) 228 229 static int b53_do_vlan_op(struct b53_device *dev, u8 op) 230 { 231 unsigned int i; 232 233 b53_write8(dev, B53_ARLIO_PAGE, dev->vta_regs[0], VTA_START_CMD | op); 234 235 for (i = 0; i < 10; i++) { 236 u8 vta; 237 238 b53_read8(dev, B53_ARLIO_PAGE, dev->vta_regs[0], &vta); 239 if (!(vta & VTA_START_CMD)) 240 return 0; 241 242 usleep_range(100, 200); 243 } 244 245 return -EIO; 246 } 247 248 static void b53_set_vlan_entry(struct b53_device *dev, u16 vid, 249 struct b53_vlan *vlan) 250 { 251 if (is5325(dev)) { 252 u32 entry = 0; 253 254 if (vlan->members) { 255 entry = ((vlan->untag & VA_UNTAG_MASK_25) << 256 VA_UNTAG_S_25) | vlan->members; 257 if (dev->core_rev >= 3) 258 entry |= VA_VALID_25_R4 | vid << VA_VID_HIGH_S; 259 else 260 entry |= VA_VALID_25; 261 } 262 263 b53_write32(dev, B53_VLAN_PAGE, B53_VLAN_WRITE_25, entry); 264 b53_write16(dev, B53_VLAN_PAGE, B53_VLAN_TABLE_ACCESS_25, vid | 265 VTA_RW_STATE_WR | VTA_RW_OP_EN); 266 } else if (is5365(dev)) { 267 u16 entry = 0; 268 269 if (vlan->members) 270 entry = ((vlan->untag & VA_UNTAG_MASK_65) << 271 VA_UNTAG_S_65) | vlan->members | VA_VALID_65; 272 273 b53_write16(dev, B53_VLAN_PAGE, B53_VLAN_WRITE_65, entry); 274 b53_write16(dev, B53_VLAN_PAGE, B53_VLAN_TABLE_ACCESS_65, vid | 275 VTA_RW_STATE_WR | VTA_RW_OP_EN); 276 } else { 277 b53_write16(dev, B53_ARLIO_PAGE, dev->vta_regs[1], vid); 278 b53_write32(dev, B53_ARLIO_PAGE, dev->vta_regs[2], 279 (vlan->untag << VTE_UNTAG_S) | vlan->members); 280 281 b53_do_vlan_op(dev, VTA_CMD_WRITE); 282 } 283 284 dev_dbg(dev->ds->dev, "VID: %d, members: 0x%04x, untag: 0x%04x\n", 285 vid, vlan->members, vlan->untag); 286 } 287 288 static void b53_get_vlan_entry(struct b53_device *dev, u16 vid, 289 struct b53_vlan *vlan) 290 { 291 if (is5325(dev)) { 292 u32 entry = 0; 293 294 b53_write16(dev, B53_VLAN_PAGE, B53_VLAN_TABLE_ACCESS_25, vid | 295 VTA_RW_STATE_RD | VTA_RW_OP_EN); 296 b53_read32(dev, B53_VLAN_PAGE, B53_VLAN_WRITE_25, &entry); 297 298 if (dev->core_rev >= 3) 299 vlan->valid = !!(entry & VA_VALID_25_R4); 300 else 301 vlan->valid = !!(entry & VA_VALID_25); 302 vlan->members = entry & VA_MEMBER_MASK; 303 vlan->untag = (entry >> VA_UNTAG_S_25) & VA_UNTAG_MASK_25; 304 305 } else if (is5365(dev)) { 306 u16 entry = 0; 307 308 b53_write16(dev, B53_VLAN_PAGE, B53_VLAN_TABLE_ACCESS_65, vid | 309 VTA_RW_STATE_WR | VTA_RW_OP_EN); 310 b53_read16(dev, B53_VLAN_PAGE, B53_VLAN_WRITE_65, &entry); 311 312 vlan->valid = !!(entry & VA_VALID_65); 313 vlan->members = entry & VA_MEMBER_MASK; 314 vlan->untag = (entry >> VA_UNTAG_S_65) & VA_UNTAG_MASK_65; 315 } else { 316 u32 entry = 0; 317 318 b53_write16(dev, B53_ARLIO_PAGE, dev->vta_regs[1], vid); 319 b53_do_vlan_op(dev, VTA_CMD_READ); 320 b53_read32(dev, B53_ARLIO_PAGE, dev->vta_regs[2], &entry); 321 vlan->members = entry & VTE_MEMBERS; 322 vlan->untag = (entry >> VTE_UNTAG_S) & VTE_MEMBERS; 323 vlan->valid = true; 324 } 325 } 326 327 static void b53_set_forwarding(struct b53_device *dev, int enable) 328 { 329 u8 mgmt; 330 331 b53_read8(dev, B53_CTRL_PAGE, B53_SWITCH_MODE, &mgmt); 332 333 if (enable) 334 mgmt |= SM_SW_FWD_EN; 335 else 336 mgmt &= ~SM_SW_FWD_EN; 337 338 b53_write8(dev, B53_CTRL_PAGE, B53_SWITCH_MODE, mgmt); 339 340 /* Include IMP port in dumb forwarding mode 341 */ 342 b53_read8(dev, B53_CTRL_PAGE, B53_SWITCH_CTRL, &mgmt); 343 mgmt |= B53_MII_DUMB_FWDG_EN; 344 b53_write8(dev, B53_CTRL_PAGE, B53_SWITCH_CTRL, mgmt); 345 346 /* Look at B53_UC_FWD_EN and B53_MC_FWD_EN to decide whether 347 * frames should be flooded or not. 348 */ 349 b53_read8(dev, B53_CTRL_PAGE, B53_IP_MULTICAST_CTRL, &mgmt); 350 mgmt |= B53_UC_FWD_EN | B53_MC_FWD_EN; 351 b53_write8(dev, B53_CTRL_PAGE, B53_IP_MULTICAST_CTRL, mgmt); 352 } 353 354 static void b53_enable_vlan(struct b53_device *dev, bool enable, 355 bool enable_filtering) 356 { 357 u8 mgmt, vc0, vc1, vc4 = 0, vc5; 358 359 b53_read8(dev, B53_CTRL_PAGE, B53_SWITCH_MODE, &mgmt); 360 b53_read8(dev, B53_VLAN_PAGE, B53_VLAN_CTRL0, &vc0); 361 b53_read8(dev, B53_VLAN_PAGE, B53_VLAN_CTRL1, &vc1); 362 363 if (is5325(dev) || is5365(dev)) { 364 b53_read8(dev, B53_VLAN_PAGE, B53_VLAN_CTRL4_25, &vc4); 365 b53_read8(dev, B53_VLAN_PAGE, B53_VLAN_CTRL5_25, &vc5); 366 } else if (is63xx(dev)) { 367 b53_read8(dev, B53_VLAN_PAGE, B53_VLAN_CTRL4_63XX, &vc4); 368 b53_read8(dev, B53_VLAN_PAGE, B53_VLAN_CTRL5_63XX, &vc5); 369 } else { 370 b53_read8(dev, B53_VLAN_PAGE, B53_VLAN_CTRL4, &vc4); 371 b53_read8(dev, B53_VLAN_PAGE, B53_VLAN_CTRL5, &vc5); 372 } 373 374 mgmt &= ~SM_SW_FWD_MODE; 375 376 if (enable) { 377 vc0 |= VC0_VLAN_EN | VC0_VID_CHK_EN | VC0_VID_HASH_VID; 378 vc1 |= VC1_RX_MCST_UNTAG_EN | VC1_RX_MCST_FWD_EN; 379 vc4 &= ~VC4_ING_VID_CHECK_MASK; 380 if (enable_filtering) { 381 vc4 |= VC4_ING_VID_VIO_DROP << VC4_ING_VID_CHECK_S; 382 vc5 |= VC5_DROP_VTABLE_MISS; 383 } else { 384 vc4 |= VC4_ING_VID_VIO_FWD << VC4_ING_VID_CHECK_S; 385 vc5 &= ~VC5_DROP_VTABLE_MISS; 386 } 387 388 if (is5325(dev)) 389 vc0 &= ~VC0_RESERVED_1; 390 391 if (is5325(dev) || is5365(dev)) 392 vc1 |= VC1_RX_MCST_TAG_EN; 393 394 } else { 395 vc0 &= ~(VC0_VLAN_EN | VC0_VID_CHK_EN | VC0_VID_HASH_VID); 396 vc1 &= ~(VC1_RX_MCST_UNTAG_EN | VC1_RX_MCST_FWD_EN); 397 vc4 &= ~VC4_ING_VID_CHECK_MASK; 398 vc5 &= ~VC5_DROP_VTABLE_MISS; 399 400 if (is5325(dev) || is5365(dev)) 401 vc4 |= VC4_ING_VID_VIO_FWD << VC4_ING_VID_CHECK_S; 402 else 403 vc4 |= VC4_ING_VID_VIO_TO_IMP << VC4_ING_VID_CHECK_S; 404 405 if (is5325(dev) || is5365(dev)) 406 vc1 &= ~VC1_RX_MCST_TAG_EN; 407 } 408 409 if (!is5325(dev) && !is5365(dev)) 410 vc5 &= ~VC5_VID_FFF_EN; 411 412 b53_write8(dev, B53_VLAN_PAGE, B53_VLAN_CTRL0, vc0); 413 b53_write8(dev, B53_VLAN_PAGE, B53_VLAN_CTRL1, vc1); 414 415 if (is5325(dev) || is5365(dev)) { 416 /* enable the high 8 bit vid check on 5325 */ 417 if (is5325(dev) && enable) 418 b53_write8(dev, B53_VLAN_PAGE, B53_VLAN_CTRL3, 419 VC3_HIGH_8BIT_EN); 420 else 421 b53_write8(dev, B53_VLAN_PAGE, B53_VLAN_CTRL3, 0); 422 423 b53_write8(dev, B53_VLAN_PAGE, B53_VLAN_CTRL4_25, vc4); 424 b53_write8(dev, B53_VLAN_PAGE, B53_VLAN_CTRL5_25, vc5); 425 } else if (is63xx(dev)) { 426 b53_write16(dev, B53_VLAN_PAGE, B53_VLAN_CTRL3_63XX, 0); 427 b53_write8(dev, B53_VLAN_PAGE, B53_VLAN_CTRL4_63XX, vc4); 428 b53_write8(dev, B53_VLAN_PAGE, B53_VLAN_CTRL5_63XX, vc5); 429 } else { 430 b53_write16(dev, B53_VLAN_PAGE, B53_VLAN_CTRL3, 0); 431 b53_write8(dev, B53_VLAN_PAGE, B53_VLAN_CTRL4, vc4); 432 b53_write8(dev, B53_VLAN_PAGE, B53_VLAN_CTRL5, vc5); 433 } 434 435 b53_write8(dev, B53_CTRL_PAGE, B53_SWITCH_MODE, mgmt); 436 437 dev->vlan_enabled = enable; 438 } 439 440 static int b53_set_jumbo(struct b53_device *dev, bool enable, bool allow_10_100) 441 { 442 u32 port_mask = 0; 443 u16 max_size = JMS_MIN_SIZE; 444 445 if (is5325(dev) || is5365(dev)) 446 return -EINVAL; 447 448 if (enable) { 449 port_mask = dev->enabled_ports; 450 max_size = JMS_MAX_SIZE; 451 if (allow_10_100) 452 port_mask |= JPM_10_100_JUMBO_EN; 453 } 454 455 b53_write32(dev, B53_JUMBO_PAGE, dev->jumbo_pm_reg, port_mask); 456 return b53_write16(dev, B53_JUMBO_PAGE, dev->jumbo_size_reg, max_size); 457 } 458 459 static int b53_flush_arl(struct b53_device *dev, u8 mask) 460 { 461 unsigned int i; 462 463 b53_write8(dev, B53_CTRL_PAGE, B53_FAST_AGE_CTRL, 464 FAST_AGE_DONE | FAST_AGE_DYNAMIC | mask); 465 466 for (i = 0; i < 10; i++) { 467 u8 fast_age_ctrl; 468 469 b53_read8(dev, B53_CTRL_PAGE, B53_FAST_AGE_CTRL, 470 &fast_age_ctrl); 471 472 if (!(fast_age_ctrl & FAST_AGE_DONE)) 473 goto out; 474 475 msleep(1); 476 } 477 478 return -ETIMEDOUT; 479 out: 480 /* Only age dynamic entries (default behavior) */ 481 b53_write8(dev, B53_CTRL_PAGE, B53_FAST_AGE_CTRL, FAST_AGE_DYNAMIC); 482 return 0; 483 } 484 485 static int b53_fast_age_port(struct b53_device *dev, int port) 486 { 487 b53_write8(dev, B53_CTRL_PAGE, B53_FAST_AGE_PORT_CTRL, port); 488 489 return b53_flush_arl(dev, FAST_AGE_PORT); 490 } 491 492 static int b53_fast_age_vlan(struct b53_device *dev, u16 vid) 493 { 494 b53_write16(dev, B53_CTRL_PAGE, B53_FAST_AGE_VID_CTRL, vid); 495 496 return b53_flush_arl(dev, FAST_AGE_VLAN); 497 } 498 499 void b53_imp_vlan_setup(struct dsa_switch *ds, int cpu_port) 500 { 501 struct b53_device *dev = ds->priv; 502 unsigned int i; 503 u16 pvlan; 504 505 /* Enable the IMP port to be in the same VLAN as the other ports 506 * on a per-port basis such that we only have Port i and IMP in 507 * the same VLAN. 508 */ 509 b53_for_each_port(dev, i) { 510 b53_read16(dev, B53_PVLAN_PAGE, B53_PVLAN_PORT_MASK(i), &pvlan); 511 pvlan |= BIT(cpu_port); 512 b53_write16(dev, B53_PVLAN_PAGE, B53_PVLAN_PORT_MASK(i), pvlan); 513 } 514 } 515 EXPORT_SYMBOL(b53_imp_vlan_setup); 516 517 int b53_enable_port(struct dsa_switch *ds, int port, struct phy_device *phy) 518 { 519 struct b53_device *dev = ds->priv; 520 unsigned int cpu_port; 521 int ret = 0; 522 u16 pvlan; 523 524 if (!dsa_is_user_port(ds, port)) 525 return 0; 526 527 cpu_port = ds->ports[port].cpu_dp->index; 528 529 if (dev->ops->irq_enable) 530 ret = dev->ops->irq_enable(dev, port); 531 if (ret) 532 return ret; 533 534 /* Clear the Rx and Tx disable bits and set to no spanning tree */ 535 b53_write8(dev, B53_CTRL_PAGE, B53_PORT_CTRL(port), 0); 536 537 /* Set this port, and only this one to be in the default VLAN, 538 * if member of a bridge, restore its membership prior to 539 * bringing down this port. 540 */ 541 b53_read16(dev, B53_PVLAN_PAGE, B53_PVLAN_PORT_MASK(port), &pvlan); 542 pvlan &= ~0x1ff; 543 pvlan |= BIT(port); 544 pvlan |= dev->ports[port].vlan_ctl_mask; 545 b53_write16(dev, B53_PVLAN_PAGE, B53_PVLAN_PORT_MASK(port), pvlan); 546 547 b53_imp_vlan_setup(ds, cpu_port); 548 549 /* If EEE was enabled, restore it */ 550 if (dev->ports[port].eee.eee_enabled) 551 b53_eee_enable_set(ds, port, true); 552 553 return 0; 554 } 555 EXPORT_SYMBOL(b53_enable_port); 556 557 void b53_disable_port(struct dsa_switch *ds, int port) 558 { 559 struct b53_device *dev = ds->priv; 560 u8 reg; 561 562 /* Disable Tx/Rx for the port */ 563 b53_read8(dev, B53_CTRL_PAGE, B53_PORT_CTRL(port), ®); 564 reg |= PORT_CTRL_RX_DISABLE | PORT_CTRL_TX_DISABLE; 565 b53_write8(dev, B53_CTRL_PAGE, B53_PORT_CTRL(port), reg); 566 567 if (dev->ops->irq_disable) 568 dev->ops->irq_disable(dev, port); 569 } 570 EXPORT_SYMBOL(b53_disable_port); 571 572 void b53_brcm_hdr_setup(struct dsa_switch *ds, int port) 573 { 574 bool tag_en = !(ds->ops->get_tag_protocol(ds, port) == 575 DSA_TAG_PROTO_NONE); 576 struct b53_device *dev = ds->priv; 577 u8 hdr_ctl, val; 578 u16 reg; 579 580 /* Resolve which bit controls the Broadcom tag */ 581 switch (port) { 582 case 8: 583 val = BRCM_HDR_P8_EN; 584 break; 585 case 7: 586 val = BRCM_HDR_P7_EN; 587 break; 588 case 5: 589 val = BRCM_HDR_P5_EN; 590 break; 591 default: 592 val = 0; 593 break; 594 } 595 596 /* Enable Broadcom tags for IMP port */ 597 b53_read8(dev, B53_MGMT_PAGE, B53_BRCM_HDR, &hdr_ctl); 598 if (tag_en) 599 hdr_ctl |= val; 600 else 601 hdr_ctl &= ~val; 602 b53_write8(dev, B53_MGMT_PAGE, B53_BRCM_HDR, hdr_ctl); 603 604 /* Registers below are only accessible on newer devices */ 605 if (!is58xx(dev)) 606 return; 607 608 /* Enable reception Broadcom tag for CPU TX (switch RX) to 609 * allow us to tag outgoing frames 610 */ 611 b53_read16(dev, B53_MGMT_PAGE, B53_BRCM_HDR_RX_DIS, ®); 612 if (tag_en) 613 reg &= ~BIT(port); 614 else 615 reg |= BIT(port); 616 b53_write16(dev, B53_MGMT_PAGE, B53_BRCM_HDR_RX_DIS, reg); 617 618 /* Enable transmission of Broadcom tags from the switch (CPU RX) to 619 * allow delivering frames to the per-port net_devices 620 */ 621 b53_read16(dev, B53_MGMT_PAGE, B53_BRCM_HDR_TX_DIS, ®); 622 if (tag_en) 623 reg &= ~BIT(port); 624 else 625 reg |= BIT(port); 626 b53_write16(dev, B53_MGMT_PAGE, B53_BRCM_HDR_TX_DIS, reg); 627 } 628 EXPORT_SYMBOL(b53_brcm_hdr_setup); 629 630 static void b53_enable_cpu_port(struct b53_device *dev, int port) 631 { 632 u8 port_ctrl; 633 634 /* BCM5325 CPU port is at 8 */ 635 if ((is5325(dev) || is5365(dev)) && port == B53_CPU_PORT_25) 636 port = B53_CPU_PORT; 637 638 port_ctrl = PORT_CTRL_RX_BCST_EN | 639 PORT_CTRL_RX_MCST_EN | 640 PORT_CTRL_RX_UCST_EN; 641 b53_write8(dev, B53_CTRL_PAGE, B53_PORT_CTRL(port), port_ctrl); 642 643 b53_brcm_hdr_setup(dev->ds, port); 644 } 645 646 static void b53_enable_mib(struct b53_device *dev) 647 { 648 u8 gc; 649 650 b53_read8(dev, B53_MGMT_PAGE, B53_GLOBAL_CONFIG, &gc); 651 gc &= ~(GC_RESET_MIB | GC_MIB_AC_EN); 652 b53_write8(dev, B53_MGMT_PAGE, B53_GLOBAL_CONFIG, gc); 653 } 654 655 static u16 b53_default_pvid(struct b53_device *dev) 656 { 657 if (is5325(dev) || is5365(dev)) 658 return 1; 659 else 660 return 0; 661 } 662 663 int b53_configure_vlan(struct dsa_switch *ds) 664 { 665 struct b53_device *dev = ds->priv; 666 struct b53_vlan vl = { 0 }; 667 int i, def_vid; 668 669 def_vid = b53_default_pvid(dev); 670 671 /* clear all vlan entries */ 672 if (is5325(dev) || is5365(dev)) { 673 for (i = def_vid; i < dev->num_vlans; i++) 674 b53_set_vlan_entry(dev, i, &vl); 675 } else { 676 b53_do_vlan_op(dev, VTA_CMD_CLEAR); 677 } 678 679 b53_enable_vlan(dev, false, ds->vlan_filtering); 680 681 b53_for_each_port(dev, i) 682 b53_write16(dev, B53_VLAN_PAGE, 683 B53_VLAN_PORT_DEF_TAG(i), def_vid); 684 685 if (!is5325(dev) && !is5365(dev)) 686 b53_set_jumbo(dev, dev->enable_jumbo, false); 687 688 return 0; 689 } 690 EXPORT_SYMBOL(b53_configure_vlan); 691 692 static void b53_switch_reset_gpio(struct b53_device *dev) 693 { 694 int gpio = dev->reset_gpio; 695 696 if (gpio < 0) 697 return; 698 699 /* Reset sequence: RESET low(50ms)->high(20ms) 700 */ 701 gpio_set_value(gpio, 0); 702 mdelay(50); 703 704 gpio_set_value(gpio, 1); 705 mdelay(20); 706 707 dev->current_page = 0xff; 708 } 709 710 static int b53_switch_reset(struct b53_device *dev) 711 { 712 unsigned int timeout = 1000; 713 u8 mgmt, reg; 714 715 b53_switch_reset_gpio(dev); 716 717 if (is539x(dev)) { 718 b53_write8(dev, B53_CTRL_PAGE, B53_SOFTRESET, 0x83); 719 b53_write8(dev, B53_CTRL_PAGE, B53_SOFTRESET, 0x00); 720 } 721 722 /* This is specific to 58xx devices here, do not use is58xx() which 723 * covers the larger Starfigther 2 family, including 7445/7278 which 724 * still use this driver as a library and need to perform the reset 725 * earlier. 726 */ 727 if (dev->chip_id == BCM58XX_DEVICE_ID || 728 dev->chip_id == BCM583XX_DEVICE_ID) { 729 b53_read8(dev, B53_CTRL_PAGE, B53_SOFTRESET, ®); 730 reg |= SW_RST | EN_SW_RST | EN_CH_RST; 731 b53_write8(dev, B53_CTRL_PAGE, B53_SOFTRESET, reg); 732 733 do { 734 b53_read8(dev, B53_CTRL_PAGE, B53_SOFTRESET, ®); 735 if (!(reg & SW_RST)) 736 break; 737 738 usleep_range(1000, 2000); 739 } while (timeout-- > 0); 740 741 if (timeout == 0) 742 return -ETIMEDOUT; 743 } 744 745 b53_read8(dev, B53_CTRL_PAGE, B53_SWITCH_MODE, &mgmt); 746 747 if (!(mgmt & SM_SW_FWD_EN)) { 748 mgmt &= ~SM_SW_FWD_MODE; 749 mgmt |= SM_SW_FWD_EN; 750 751 b53_write8(dev, B53_CTRL_PAGE, B53_SWITCH_MODE, mgmt); 752 b53_read8(dev, B53_CTRL_PAGE, B53_SWITCH_MODE, &mgmt); 753 754 if (!(mgmt & SM_SW_FWD_EN)) { 755 dev_err(dev->dev, "Failed to enable switch!\n"); 756 return -EINVAL; 757 } 758 } 759 760 b53_enable_mib(dev); 761 762 return b53_flush_arl(dev, FAST_AGE_STATIC); 763 } 764 765 static int b53_phy_read16(struct dsa_switch *ds, int addr, int reg) 766 { 767 struct b53_device *priv = ds->priv; 768 u16 value = 0; 769 int ret; 770 771 if (priv->ops->phy_read16) 772 ret = priv->ops->phy_read16(priv, addr, reg, &value); 773 else 774 ret = b53_read16(priv, B53_PORT_MII_PAGE(addr), 775 reg * 2, &value); 776 777 return ret ? ret : value; 778 } 779 780 static int b53_phy_write16(struct dsa_switch *ds, int addr, int reg, u16 val) 781 { 782 struct b53_device *priv = ds->priv; 783 784 if (priv->ops->phy_write16) 785 return priv->ops->phy_write16(priv, addr, reg, val); 786 787 return b53_write16(priv, B53_PORT_MII_PAGE(addr), reg * 2, val); 788 } 789 790 static int b53_reset_switch(struct b53_device *priv) 791 { 792 /* reset vlans */ 793 priv->enable_jumbo = false; 794 795 memset(priv->vlans, 0, sizeof(*priv->vlans) * priv->num_vlans); 796 memset(priv->ports, 0, sizeof(*priv->ports) * priv->num_ports); 797 798 priv->serdes_lane = B53_INVALID_LANE; 799 800 return b53_switch_reset(priv); 801 } 802 803 static int b53_apply_config(struct b53_device *priv) 804 { 805 /* disable switching */ 806 b53_set_forwarding(priv, 0); 807 808 b53_configure_vlan(priv->ds); 809 810 /* enable switching */ 811 b53_set_forwarding(priv, 1); 812 813 return 0; 814 } 815 816 static void b53_reset_mib(struct b53_device *priv) 817 { 818 u8 gc; 819 820 b53_read8(priv, B53_MGMT_PAGE, B53_GLOBAL_CONFIG, &gc); 821 822 b53_write8(priv, B53_MGMT_PAGE, B53_GLOBAL_CONFIG, gc | GC_RESET_MIB); 823 msleep(1); 824 b53_write8(priv, B53_MGMT_PAGE, B53_GLOBAL_CONFIG, gc & ~GC_RESET_MIB); 825 msleep(1); 826 } 827 828 static const struct b53_mib_desc *b53_get_mib(struct b53_device *dev) 829 { 830 if (is5365(dev)) 831 return b53_mibs_65; 832 else if (is63xx(dev)) 833 return b53_mibs_63xx; 834 else if (is58xx(dev)) 835 return b53_mibs_58xx; 836 else 837 return b53_mibs; 838 } 839 840 static unsigned int b53_get_mib_size(struct b53_device *dev) 841 { 842 if (is5365(dev)) 843 return B53_MIBS_65_SIZE; 844 else if (is63xx(dev)) 845 return B53_MIBS_63XX_SIZE; 846 else if (is58xx(dev)) 847 return B53_MIBS_58XX_SIZE; 848 else 849 return B53_MIBS_SIZE; 850 } 851 852 static struct phy_device *b53_get_phy_device(struct dsa_switch *ds, int port) 853 { 854 /* These ports typically do not have built-in PHYs */ 855 switch (port) { 856 case B53_CPU_PORT_25: 857 case 7: 858 case B53_CPU_PORT: 859 return NULL; 860 } 861 862 return mdiobus_get_phy(ds->slave_mii_bus, port); 863 } 864 865 void b53_get_strings(struct dsa_switch *ds, int port, u32 stringset, 866 uint8_t *data) 867 { 868 struct b53_device *dev = ds->priv; 869 const struct b53_mib_desc *mibs = b53_get_mib(dev); 870 unsigned int mib_size = b53_get_mib_size(dev); 871 struct phy_device *phydev; 872 unsigned int i; 873 874 if (stringset == ETH_SS_STATS) { 875 for (i = 0; i < mib_size; i++) 876 strlcpy(data + i * ETH_GSTRING_LEN, 877 mibs[i].name, ETH_GSTRING_LEN); 878 } else if (stringset == ETH_SS_PHY_STATS) { 879 phydev = b53_get_phy_device(ds, port); 880 if (!phydev) 881 return; 882 883 phy_ethtool_get_strings(phydev, data); 884 } 885 } 886 EXPORT_SYMBOL(b53_get_strings); 887 888 void b53_get_ethtool_stats(struct dsa_switch *ds, int port, uint64_t *data) 889 { 890 struct b53_device *dev = ds->priv; 891 const struct b53_mib_desc *mibs = b53_get_mib(dev); 892 unsigned int mib_size = b53_get_mib_size(dev); 893 const struct b53_mib_desc *s; 894 unsigned int i; 895 u64 val = 0; 896 897 if (is5365(dev) && port == 5) 898 port = 8; 899 900 mutex_lock(&dev->stats_mutex); 901 902 for (i = 0; i < mib_size; i++) { 903 s = &mibs[i]; 904 905 if (s->size == 8) { 906 b53_read64(dev, B53_MIB_PAGE(port), s->offset, &val); 907 } else { 908 u32 val32; 909 910 b53_read32(dev, B53_MIB_PAGE(port), s->offset, 911 &val32); 912 val = val32; 913 } 914 data[i] = (u64)val; 915 } 916 917 mutex_unlock(&dev->stats_mutex); 918 } 919 EXPORT_SYMBOL(b53_get_ethtool_stats); 920 921 void b53_get_ethtool_phy_stats(struct dsa_switch *ds, int port, uint64_t *data) 922 { 923 struct phy_device *phydev; 924 925 phydev = b53_get_phy_device(ds, port); 926 if (!phydev) 927 return; 928 929 phy_ethtool_get_stats(phydev, NULL, data); 930 } 931 EXPORT_SYMBOL(b53_get_ethtool_phy_stats); 932 933 int b53_get_sset_count(struct dsa_switch *ds, int port, int sset) 934 { 935 struct b53_device *dev = ds->priv; 936 struct phy_device *phydev; 937 938 if (sset == ETH_SS_STATS) { 939 return b53_get_mib_size(dev); 940 } else if (sset == ETH_SS_PHY_STATS) { 941 phydev = b53_get_phy_device(ds, port); 942 if (!phydev) 943 return 0; 944 945 return phy_ethtool_get_sset_count(phydev); 946 } 947 948 return 0; 949 } 950 EXPORT_SYMBOL(b53_get_sset_count); 951 952 static int b53_setup(struct dsa_switch *ds) 953 { 954 struct b53_device *dev = ds->priv; 955 unsigned int port; 956 int ret; 957 958 ret = b53_reset_switch(dev); 959 if (ret) { 960 dev_err(ds->dev, "failed to reset switch\n"); 961 return ret; 962 } 963 964 b53_reset_mib(dev); 965 966 ret = b53_apply_config(dev); 967 if (ret) 968 dev_err(ds->dev, "failed to apply configuration\n"); 969 970 /* Configure IMP/CPU port, disable all other ports. Enabled 971 * ports will be configured with .port_enable 972 */ 973 for (port = 0; port < dev->num_ports; port++) { 974 if (dsa_is_cpu_port(ds, port)) 975 b53_enable_cpu_port(dev, port); 976 else 977 b53_disable_port(ds, port); 978 } 979 980 /* Let DSA handle the case were multiple bridges span the same switch 981 * device and different VLAN awareness settings are requested, which 982 * would be breaking filtering semantics for any of the other bridge 983 * devices. (not hardware supported) 984 */ 985 ds->vlan_filtering_is_global = true; 986 987 return ret; 988 } 989 990 static void b53_force_link(struct b53_device *dev, int port, int link) 991 { 992 u8 reg, val, off; 993 994 /* Override the port settings */ 995 if (port == dev->cpu_port) { 996 off = B53_PORT_OVERRIDE_CTRL; 997 val = PORT_OVERRIDE_EN; 998 } else { 999 off = B53_GMII_PORT_OVERRIDE_CTRL(port); 1000 val = GMII_PO_EN; 1001 } 1002 1003 b53_read8(dev, B53_CTRL_PAGE, off, ®); 1004 reg |= val; 1005 if (link) 1006 reg |= PORT_OVERRIDE_LINK; 1007 else 1008 reg &= ~PORT_OVERRIDE_LINK; 1009 b53_write8(dev, B53_CTRL_PAGE, off, reg); 1010 } 1011 1012 static void b53_force_port_config(struct b53_device *dev, int port, 1013 int speed, int duplex, int pause) 1014 { 1015 u8 reg, val, off; 1016 1017 /* Override the port settings */ 1018 if (port == dev->cpu_port) { 1019 off = B53_PORT_OVERRIDE_CTRL; 1020 val = PORT_OVERRIDE_EN; 1021 } else { 1022 off = B53_GMII_PORT_OVERRIDE_CTRL(port); 1023 val = GMII_PO_EN; 1024 } 1025 1026 b53_read8(dev, B53_CTRL_PAGE, off, ®); 1027 reg |= val; 1028 if (duplex == DUPLEX_FULL) 1029 reg |= PORT_OVERRIDE_FULL_DUPLEX; 1030 else 1031 reg &= ~PORT_OVERRIDE_FULL_DUPLEX; 1032 1033 switch (speed) { 1034 case 2000: 1035 reg |= PORT_OVERRIDE_SPEED_2000M; 1036 /* fallthrough */ 1037 case SPEED_1000: 1038 reg |= PORT_OVERRIDE_SPEED_1000M; 1039 break; 1040 case SPEED_100: 1041 reg |= PORT_OVERRIDE_SPEED_100M; 1042 break; 1043 case SPEED_10: 1044 reg |= PORT_OVERRIDE_SPEED_10M; 1045 break; 1046 default: 1047 dev_err(dev->dev, "unknown speed: %d\n", speed); 1048 return; 1049 } 1050 1051 if (pause & MLO_PAUSE_RX) 1052 reg |= PORT_OVERRIDE_RX_FLOW; 1053 if (pause & MLO_PAUSE_TX) 1054 reg |= PORT_OVERRIDE_TX_FLOW; 1055 1056 b53_write8(dev, B53_CTRL_PAGE, off, reg); 1057 } 1058 1059 static void b53_adjust_link(struct dsa_switch *ds, int port, 1060 struct phy_device *phydev) 1061 { 1062 struct b53_device *dev = ds->priv; 1063 struct ethtool_eee *p = &dev->ports[port].eee; 1064 u8 rgmii_ctrl = 0, reg = 0, off; 1065 int pause = 0; 1066 1067 if (!phy_is_pseudo_fixed_link(phydev)) 1068 return; 1069 1070 /* Enable flow control on BCM5301x's CPU port */ 1071 if (is5301x(dev) && port == dev->cpu_port) 1072 pause = MLO_PAUSE_TXRX_MASK; 1073 1074 if (phydev->pause) { 1075 if (phydev->asym_pause) 1076 pause |= MLO_PAUSE_TX; 1077 pause |= MLO_PAUSE_RX; 1078 } 1079 1080 b53_force_port_config(dev, port, phydev->speed, phydev->duplex, pause); 1081 b53_force_link(dev, port, phydev->link); 1082 1083 if (is531x5(dev) && phy_interface_is_rgmii(phydev)) { 1084 if (port == 8) 1085 off = B53_RGMII_CTRL_IMP; 1086 else 1087 off = B53_RGMII_CTRL_P(port); 1088 1089 /* Configure the port RGMII clock delay by DLL disabled and 1090 * tx_clk aligned timing (restoring to reset defaults) 1091 */ 1092 b53_read8(dev, B53_CTRL_PAGE, off, &rgmii_ctrl); 1093 rgmii_ctrl &= ~(RGMII_CTRL_DLL_RXC | RGMII_CTRL_DLL_TXC | 1094 RGMII_CTRL_TIMING_SEL); 1095 1096 /* PHY_INTERFACE_MODE_RGMII_TXID means TX internal delay, make 1097 * sure that we enable the port TX clock internal delay to 1098 * account for this internal delay that is inserted, otherwise 1099 * the switch won't be able to receive correctly. 1100 * 1101 * PHY_INTERFACE_MODE_RGMII means that we are not introducing 1102 * any delay neither on transmission nor reception, so the 1103 * BCM53125 must also be configured accordingly to account for 1104 * the lack of delay and introduce 1105 * 1106 * The BCM53125 switch has its RX clock and TX clock control 1107 * swapped, hence the reason why we modify the TX clock path in 1108 * the "RGMII" case 1109 */ 1110 if (phydev->interface == PHY_INTERFACE_MODE_RGMII_TXID) 1111 rgmii_ctrl |= RGMII_CTRL_DLL_TXC; 1112 if (phydev->interface == PHY_INTERFACE_MODE_RGMII) 1113 rgmii_ctrl |= RGMII_CTRL_DLL_TXC | RGMII_CTRL_DLL_RXC; 1114 rgmii_ctrl |= RGMII_CTRL_TIMING_SEL; 1115 b53_write8(dev, B53_CTRL_PAGE, off, rgmii_ctrl); 1116 1117 dev_info(ds->dev, "Configured port %d for %s\n", port, 1118 phy_modes(phydev->interface)); 1119 } 1120 1121 /* configure MII port if necessary */ 1122 if (is5325(dev)) { 1123 b53_read8(dev, B53_CTRL_PAGE, B53_PORT_OVERRIDE_CTRL, 1124 ®); 1125 1126 /* reverse mii needs to be enabled */ 1127 if (!(reg & PORT_OVERRIDE_RV_MII_25)) { 1128 b53_write8(dev, B53_CTRL_PAGE, B53_PORT_OVERRIDE_CTRL, 1129 reg | PORT_OVERRIDE_RV_MII_25); 1130 b53_read8(dev, B53_CTRL_PAGE, B53_PORT_OVERRIDE_CTRL, 1131 ®); 1132 1133 if (!(reg & PORT_OVERRIDE_RV_MII_25)) { 1134 dev_err(ds->dev, 1135 "Failed to enable reverse MII mode\n"); 1136 return; 1137 } 1138 } 1139 } else if (is5301x(dev)) { 1140 if (port != dev->cpu_port) { 1141 b53_force_port_config(dev, dev->cpu_port, 2000, 1142 DUPLEX_FULL, MLO_PAUSE_TXRX_MASK); 1143 b53_force_link(dev, dev->cpu_port, 1); 1144 } 1145 } 1146 1147 /* Re-negotiate EEE if it was enabled already */ 1148 p->eee_enabled = b53_eee_init(ds, port, phydev); 1149 } 1150 1151 void b53_port_event(struct dsa_switch *ds, int port) 1152 { 1153 struct b53_device *dev = ds->priv; 1154 bool link; 1155 u16 sts; 1156 1157 b53_read16(dev, B53_STAT_PAGE, B53_LINK_STAT, &sts); 1158 link = !!(sts & BIT(port)); 1159 dsa_port_phylink_mac_change(ds, port, link); 1160 } 1161 EXPORT_SYMBOL(b53_port_event); 1162 1163 void b53_phylink_validate(struct dsa_switch *ds, int port, 1164 unsigned long *supported, 1165 struct phylink_link_state *state) 1166 { 1167 struct b53_device *dev = ds->priv; 1168 __ETHTOOL_DECLARE_LINK_MODE_MASK(mask) = { 0, }; 1169 1170 if (dev->ops->serdes_phylink_validate) 1171 dev->ops->serdes_phylink_validate(dev, port, mask, state); 1172 1173 /* Allow all the expected bits */ 1174 phylink_set(mask, Autoneg); 1175 phylink_set_port_modes(mask); 1176 phylink_set(mask, Pause); 1177 phylink_set(mask, Asym_Pause); 1178 1179 /* With the exclusion of 5325/5365, MII, Reverse MII and 802.3z, we 1180 * support Gigabit, including Half duplex. 1181 */ 1182 if (state->interface != PHY_INTERFACE_MODE_MII && 1183 state->interface != PHY_INTERFACE_MODE_REVMII && 1184 !phy_interface_mode_is_8023z(state->interface) && 1185 !(is5325(dev) || is5365(dev))) { 1186 phylink_set(mask, 1000baseT_Full); 1187 phylink_set(mask, 1000baseT_Half); 1188 } 1189 1190 if (!phy_interface_mode_is_8023z(state->interface)) { 1191 phylink_set(mask, 10baseT_Half); 1192 phylink_set(mask, 10baseT_Full); 1193 phylink_set(mask, 100baseT_Half); 1194 phylink_set(mask, 100baseT_Full); 1195 } 1196 1197 bitmap_and(supported, supported, mask, 1198 __ETHTOOL_LINK_MODE_MASK_NBITS); 1199 bitmap_and(state->advertising, state->advertising, mask, 1200 __ETHTOOL_LINK_MODE_MASK_NBITS); 1201 1202 phylink_helper_basex_speed(state); 1203 } 1204 EXPORT_SYMBOL(b53_phylink_validate); 1205 1206 int b53_phylink_mac_link_state(struct dsa_switch *ds, int port, 1207 struct phylink_link_state *state) 1208 { 1209 struct b53_device *dev = ds->priv; 1210 int ret = -EOPNOTSUPP; 1211 1212 if ((phy_interface_mode_is_8023z(state->interface) || 1213 state->interface == PHY_INTERFACE_MODE_SGMII) && 1214 dev->ops->serdes_link_state) 1215 ret = dev->ops->serdes_link_state(dev, port, state); 1216 1217 return ret; 1218 } 1219 EXPORT_SYMBOL(b53_phylink_mac_link_state); 1220 1221 void b53_phylink_mac_config(struct dsa_switch *ds, int port, 1222 unsigned int mode, 1223 const struct phylink_link_state *state) 1224 { 1225 struct b53_device *dev = ds->priv; 1226 1227 if (mode == MLO_AN_PHY) 1228 return; 1229 1230 if (mode == MLO_AN_FIXED) { 1231 b53_force_port_config(dev, port, state->speed, 1232 state->duplex, state->pause); 1233 return; 1234 } 1235 1236 if ((phy_interface_mode_is_8023z(state->interface) || 1237 state->interface == PHY_INTERFACE_MODE_SGMII) && 1238 dev->ops->serdes_config) 1239 dev->ops->serdes_config(dev, port, mode, state); 1240 } 1241 EXPORT_SYMBOL(b53_phylink_mac_config); 1242 1243 void b53_phylink_mac_an_restart(struct dsa_switch *ds, int port) 1244 { 1245 struct b53_device *dev = ds->priv; 1246 1247 if (dev->ops->serdes_an_restart) 1248 dev->ops->serdes_an_restart(dev, port); 1249 } 1250 EXPORT_SYMBOL(b53_phylink_mac_an_restart); 1251 1252 void b53_phylink_mac_link_down(struct dsa_switch *ds, int port, 1253 unsigned int mode, 1254 phy_interface_t interface) 1255 { 1256 struct b53_device *dev = ds->priv; 1257 1258 if (mode == MLO_AN_PHY) 1259 return; 1260 1261 if (mode == MLO_AN_FIXED) { 1262 b53_force_link(dev, port, false); 1263 return; 1264 } 1265 1266 if (phy_interface_mode_is_8023z(interface) && 1267 dev->ops->serdes_link_set) 1268 dev->ops->serdes_link_set(dev, port, mode, interface, false); 1269 } 1270 EXPORT_SYMBOL(b53_phylink_mac_link_down); 1271 1272 void b53_phylink_mac_link_up(struct dsa_switch *ds, int port, 1273 unsigned int mode, 1274 phy_interface_t interface, 1275 struct phy_device *phydev) 1276 { 1277 struct b53_device *dev = ds->priv; 1278 1279 if (mode == MLO_AN_PHY) 1280 return; 1281 1282 if (mode == MLO_AN_FIXED) { 1283 b53_force_link(dev, port, true); 1284 return; 1285 } 1286 1287 if (phy_interface_mode_is_8023z(interface) && 1288 dev->ops->serdes_link_set) 1289 dev->ops->serdes_link_set(dev, port, mode, interface, true); 1290 } 1291 EXPORT_SYMBOL(b53_phylink_mac_link_up); 1292 1293 int b53_vlan_filtering(struct dsa_switch *ds, int port, bool vlan_filtering) 1294 { 1295 struct b53_device *dev = ds->priv; 1296 u16 pvid, new_pvid; 1297 1298 b53_read16(dev, B53_VLAN_PAGE, B53_VLAN_PORT_DEF_TAG(port), &pvid); 1299 new_pvid = pvid; 1300 if (!vlan_filtering) { 1301 /* Filtering is currently enabled, use the default PVID since 1302 * the bridge does not expect tagging anymore 1303 */ 1304 dev->ports[port].pvid = pvid; 1305 new_pvid = b53_default_pvid(dev); 1306 } else { 1307 /* Filtering is currently disabled, restore the previous PVID */ 1308 new_pvid = dev->ports[port].pvid; 1309 } 1310 1311 if (pvid != new_pvid) 1312 b53_write16(dev, B53_VLAN_PAGE, B53_VLAN_PORT_DEF_TAG(port), 1313 new_pvid); 1314 1315 b53_enable_vlan(dev, dev->vlan_enabled, vlan_filtering); 1316 1317 return 0; 1318 } 1319 EXPORT_SYMBOL(b53_vlan_filtering); 1320 1321 int b53_vlan_prepare(struct dsa_switch *ds, int port, 1322 const struct switchdev_obj_port_vlan *vlan) 1323 { 1324 struct b53_device *dev = ds->priv; 1325 1326 if ((is5325(dev) || is5365(dev)) && vlan->vid_begin == 0) 1327 return -EOPNOTSUPP; 1328 1329 if (vlan->vid_end > dev->num_vlans) 1330 return -ERANGE; 1331 1332 b53_enable_vlan(dev, true, ds->vlan_filtering); 1333 1334 return 0; 1335 } 1336 EXPORT_SYMBOL(b53_vlan_prepare); 1337 1338 void b53_vlan_add(struct dsa_switch *ds, int port, 1339 const struct switchdev_obj_port_vlan *vlan) 1340 { 1341 struct b53_device *dev = ds->priv; 1342 bool untagged = vlan->flags & BRIDGE_VLAN_INFO_UNTAGGED; 1343 bool pvid = vlan->flags & BRIDGE_VLAN_INFO_PVID; 1344 struct b53_vlan *vl; 1345 u16 vid; 1346 1347 for (vid = vlan->vid_begin; vid <= vlan->vid_end; ++vid) { 1348 vl = &dev->vlans[vid]; 1349 1350 b53_get_vlan_entry(dev, vid, vl); 1351 1352 vl->members |= BIT(port); 1353 if (untagged && !dsa_is_cpu_port(ds, port)) 1354 vl->untag |= BIT(port); 1355 else 1356 vl->untag &= ~BIT(port); 1357 1358 b53_set_vlan_entry(dev, vid, vl); 1359 b53_fast_age_vlan(dev, vid); 1360 } 1361 1362 if (pvid && !dsa_is_cpu_port(ds, port)) { 1363 b53_write16(dev, B53_VLAN_PAGE, B53_VLAN_PORT_DEF_TAG(port), 1364 vlan->vid_end); 1365 b53_fast_age_vlan(dev, vid); 1366 } 1367 } 1368 EXPORT_SYMBOL(b53_vlan_add); 1369 1370 int b53_vlan_del(struct dsa_switch *ds, int port, 1371 const struct switchdev_obj_port_vlan *vlan) 1372 { 1373 struct b53_device *dev = ds->priv; 1374 bool untagged = vlan->flags & BRIDGE_VLAN_INFO_UNTAGGED; 1375 struct b53_vlan *vl; 1376 u16 vid; 1377 u16 pvid; 1378 1379 b53_read16(dev, B53_VLAN_PAGE, B53_VLAN_PORT_DEF_TAG(port), &pvid); 1380 1381 for (vid = vlan->vid_begin; vid <= vlan->vid_end; ++vid) { 1382 vl = &dev->vlans[vid]; 1383 1384 b53_get_vlan_entry(dev, vid, vl); 1385 1386 vl->members &= ~BIT(port); 1387 1388 if (pvid == vid) 1389 pvid = b53_default_pvid(dev); 1390 1391 if (untagged && !dsa_is_cpu_port(ds, port)) 1392 vl->untag &= ~(BIT(port)); 1393 1394 b53_set_vlan_entry(dev, vid, vl); 1395 b53_fast_age_vlan(dev, vid); 1396 } 1397 1398 b53_write16(dev, B53_VLAN_PAGE, B53_VLAN_PORT_DEF_TAG(port), pvid); 1399 b53_fast_age_vlan(dev, pvid); 1400 1401 return 0; 1402 } 1403 EXPORT_SYMBOL(b53_vlan_del); 1404 1405 /* Address Resolution Logic routines */ 1406 static int b53_arl_op_wait(struct b53_device *dev) 1407 { 1408 unsigned int timeout = 10; 1409 u8 reg; 1410 1411 do { 1412 b53_read8(dev, B53_ARLIO_PAGE, B53_ARLTBL_RW_CTRL, ®); 1413 if (!(reg & ARLTBL_START_DONE)) 1414 return 0; 1415 1416 usleep_range(1000, 2000); 1417 } while (timeout--); 1418 1419 dev_warn(dev->dev, "timeout waiting for ARL to finish: 0x%02x\n", reg); 1420 1421 return -ETIMEDOUT; 1422 } 1423 1424 static int b53_arl_rw_op(struct b53_device *dev, unsigned int op) 1425 { 1426 u8 reg; 1427 1428 if (op > ARLTBL_RW) 1429 return -EINVAL; 1430 1431 b53_read8(dev, B53_ARLIO_PAGE, B53_ARLTBL_RW_CTRL, ®); 1432 reg |= ARLTBL_START_DONE; 1433 if (op) 1434 reg |= ARLTBL_RW; 1435 else 1436 reg &= ~ARLTBL_RW; 1437 b53_write8(dev, B53_ARLIO_PAGE, B53_ARLTBL_RW_CTRL, reg); 1438 1439 return b53_arl_op_wait(dev); 1440 } 1441 1442 static int b53_arl_read(struct b53_device *dev, u64 mac, 1443 u16 vid, struct b53_arl_entry *ent, u8 *idx, 1444 bool is_valid) 1445 { 1446 unsigned int i; 1447 int ret; 1448 1449 ret = b53_arl_op_wait(dev); 1450 if (ret) 1451 return ret; 1452 1453 /* Read the bins */ 1454 for (i = 0; i < dev->num_arl_entries; i++) { 1455 u64 mac_vid; 1456 u32 fwd_entry; 1457 1458 b53_read64(dev, B53_ARLIO_PAGE, 1459 B53_ARLTBL_MAC_VID_ENTRY(i), &mac_vid); 1460 b53_read32(dev, B53_ARLIO_PAGE, 1461 B53_ARLTBL_DATA_ENTRY(i), &fwd_entry); 1462 b53_arl_to_entry(ent, mac_vid, fwd_entry); 1463 1464 if (!(fwd_entry & ARLTBL_VALID)) 1465 continue; 1466 if ((mac_vid & ARLTBL_MAC_MASK) != mac) 1467 continue; 1468 *idx = i; 1469 } 1470 1471 return -ENOENT; 1472 } 1473 1474 static int b53_arl_op(struct b53_device *dev, int op, int port, 1475 const unsigned char *addr, u16 vid, bool is_valid) 1476 { 1477 struct b53_arl_entry ent; 1478 u32 fwd_entry; 1479 u64 mac, mac_vid = 0; 1480 u8 idx = 0; 1481 int ret; 1482 1483 /* Convert the array into a 64-bit MAC */ 1484 mac = ether_addr_to_u64(addr); 1485 1486 /* Perform a read for the given MAC and VID */ 1487 b53_write48(dev, B53_ARLIO_PAGE, B53_MAC_ADDR_IDX, mac); 1488 b53_write16(dev, B53_ARLIO_PAGE, B53_VLAN_ID_IDX, vid); 1489 1490 /* Issue a read operation for this MAC */ 1491 ret = b53_arl_rw_op(dev, 1); 1492 if (ret) 1493 return ret; 1494 1495 ret = b53_arl_read(dev, mac, vid, &ent, &idx, is_valid); 1496 /* If this is a read, just finish now */ 1497 if (op) 1498 return ret; 1499 1500 /* We could not find a matching MAC, so reset to a new entry */ 1501 if (ret) { 1502 fwd_entry = 0; 1503 idx = 1; 1504 } 1505 1506 memset(&ent, 0, sizeof(ent)); 1507 ent.port = port; 1508 ent.is_valid = is_valid; 1509 ent.vid = vid; 1510 ent.is_static = true; 1511 memcpy(ent.mac, addr, ETH_ALEN); 1512 b53_arl_from_entry(&mac_vid, &fwd_entry, &ent); 1513 1514 b53_write64(dev, B53_ARLIO_PAGE, 1515 B53_ARLTBL_MAC_VID_ENTRY(idx), mac_vid); 1516 b53_write32(dev, B53_ARLIO_PAGE, 1517 B53_ARLTBL_DATA_ENTRY(idx), fwd_entry); 1518 1519 return b53_arl_rw_op(dev, 0); 1520 } 1521 1522 int b53_fdb_add(struct dsa_switch *ds, int port, 1523 const unsigned char *addr, u16 vid) 1524 { 1525 struct b53_device *priv = ds->priv; 1526 1527 /* 5325 and 5365 require some more massaging, but could 1528 * be supported eventually 1529 */ 1530 if (is5325(priv) || is5365(priv)) 1531 return -EOPNOTSUPP; 1532 1533 return b53_arl_op(priv, 0, port, addr, vid, true); 1534 } 1535 EXPORT_SYMBOL(b53_fdb_add); 1536 1537 int b53_fdb_del(struct dsa_switch *ds, int port, 1538 const unsigned char *addr, u16 vid) 1539 { 1540 struct b53_device *priv = ds->priv; 1541 1542 return b53_arl_op(priv, 0, port, addr, vid, false); 1543 } 1544 EXPORT_SYMBOL(b53_fdb_del); 1545 1546 static int b53_arl_search_wait(struct b53_device *dev) 1547 { 1548 unsigned int timeout = 1000; 1549 u8 reg; 1550 1551 do { 1552 b53_read8(dev, B53_ARLIO_PAGE, B53_ARL_SRCH_CTL, ®); 1553 if (!(reg & ARL_SRCH_STDN)) 1554 return 0; 1555 1556 if (reg & ARL_SRCH_VLID) 1557 return 0; 1558 1559 usleep_range(1000, 2000); 1560 } while (timeout--); 1561 1562 return -ETIMEDOUT; 1563 } 1564 1565 static void b53_arl_search_rd(struct b53_device *dev, u8 idx, 1566 struct b53_arl_entry *ent) 1567 { 1568 u64 mac_vid; 1569 u32 fwd_entry; 1570 1571 b53_read64(dev, B53_ARLIO_PAGE, 1572 B53_ARL_SRCH_RSTL_MACVID(idx), &mac_vid); 1573 b53_read32(dev, B53_ARLIO_PAGE, 1574 B53_ARL_SRCH_RSTL(idx), &fwd_entry); 1575 b53_arl_to_entry(ent, mac_vid, fwd_entry); 1576 } 1577 1578 static int b53_fdb_copy(int port, const struct b53_arl_entry *ent, 1579 dsa_fdb_dump_cb_t *cb, void *data) 1580 { 1581 if (!ent->is_valid) 1582 return 0; 1583 1584 if (port != ent->port) 1585 return 0; 1586 1587 return cb(ent->mac, ent->vid, ent->is_static, data); 1588 } 1589 1590 int b53_fdb_dump(struct dsa_switch *ds, int port, 1591 dsa_fdb_dump_cb_t *cb, void *data) 1592 { 1593 struct b53_device *priv = ds->priv; 1594 struct b53_arl_entry results[2]; 1595 unsigned int count = 0; 1596 int ret; 1597 u8 reg; 1598 1599 /* Start search operation */ 1600 reg = ARL_SRCH_STDN; 1601 b53_write8(priv, B53_ARLIO_PAGE, B53_ARL_SRCH_CTL, reg); 1602 1603 do { 1604 ret = b53_arl_search_wait(priv); 1605 if (ret) 1606 return ret; 1607 1608 b53_arl_search_rd(priv, 0, &results[0]); 1609 ret = b53_fdb_copy(port, &results[0], cb, data); 1610 if (ret) 1611 return ret; 1612 1613 if (priv->num_arl_entries > 2) { 1614 b53_arl_search_rd(priv, 1, &results[1]); 1615 ret = b53_fdb_copy(port, &results[1], cb, data); 1616 if (ret) 1617 return ret; 1618 1619 if (!results[0].is_valid && !results[1].is_valid) 1620 break; 1621 } 1622 1623 } while (count++ < 1024); 1624 1625 return 0; 1626 } 1627 EXPORT_SYMBOL(b53_fdb_dump); 1628 1629 int b53_br_join(struct dsa_switch *ds, int port, struct net_device *br) 1630 { 1631 struct b53_device *dev = ds->priv; 1632 s8 cpu_port = ds->ports[port].cpu_dp->index; 1633 u16 pvlan, reg; 1634 unsigned int i; 1635 1636 /* Make this port leave the all VLANs join since we will have proper 1637 * VLAN entries from now on 1638 */ 1639 if (is58xx(dev)) { 1640 b53_read16(dev, B53_VLAN_PAGE, B53_JOIN_ALL_VLAN_EN, ®); 1641 reg &= ~BIT(port); 1642 if ((reg & BIT(cpu_port)) == BIT(cpu_port)) 1643 reg &= ~BIT(cpu_port); 1644 b53_write16(dev, B53_VLAN_PAGE, B53_JOIN_ALL_VLAN_EN, reg); 1645 } 1646 1647 b53_read16(dev, B53_PVLAN_PAGE, B53_PVLAN_PORT_MASK(port), &pvlan); 1648 1649 b53_for_each_port(dev, i) { 1650 if (dsa_to_port(ds, i)->bridge_dev != br) 1651 continue; 1652 1653 /* Add this local port to the remote port VLAN control 1654 * membership and update the remote port bitmask 1655 */ 1656 b53_read16(dev, B53_PVLAN_PAGE, B53_PVLAN_PORT_MASK(i), ®); 1657 reg |= BIT(port); 1658 b53_write16(dev, B53_PVLAN_PAGE, B53_PVLAN_PORT_MASK(i), reg); 1659 dev->ports[i].vlan_ctl_mask = reg; 1660 1661 pvlan |= BIT(i); 1662 } 1663 1664 /* Configure the local port VLAN control membership to include 1665 * remote ports and update the local port bitmask 1666 */ 1667 b53_write16(dev, B53_PVLAN_PAGE, B53_PVLAN_PORT_MASK(port), pvlan); 1668 dev->ports[port].vlan_ctl_mask = pvlan; 1669 1670 return 0; 1671 } 1672 EXPORT_SYMBOL(b53_br_join); 1673 1674 void b53_br_leave(struct dsa_switch *ds, int port, struct net_device *br) 1675 { 1676 struct b53_device *dev = ds->priv; 1677 struct b53_vlan *vl = &dev->vlans[0]; 1678 s8 cpu_port = ds->ports[port].cpu_dp->index; 1679 unsigned int i; 1680 u16 pvlan, reg, pvid; 1681 1682 b53_read16(dev, B53_PVLAN_PAGE, B53_PVLAN_PORT_MASK(port), &pvlan); 1683 1684 b53_for_each_port(dev, i) { 1685 /* Don't touch the remaining ports */ 1686 if (dsa_to_port(ds, i)->bridge_dev != br) 1687 continue; 1688 1689 b53_read16(dev, B53_PVLAN_PAGE, B53_PVLAN_PORT_MASK(i), ®); 1690 reg &= ~BIT(port); 1691 b53_write16(dev, B53_PVLAN_PAGE, B53_PVLAN_PORT_MASK(i), reg); 1692 dev->ports[port].vlan_ctl_mask = reg; 1693 1694 /* Prevent self removal to preserve isolation */ 1695 if (port != i) 1696 pvlan &= ~BIT(i); 1697 } 1698 1699 b53_write16(dev, B53_PVLAN_PAGE, B53_PVLAN_PORT_MASK(port), pvlan); 1700 dev->ports[port].vlan_ctl_mask = pvlan; 1701 1702 pvid = b53_default_pvid(dev); 1703 1704 /* Make this port join all VLANs without VLAN entries */ 1705 if (is58xx(dev)) { 1706 b53_read16(dev, B53_VLAN_PAGE, B53_JOIN_ALL_VLAN_EN, ®); 1707 reg |= BIT(port); 1708 if (!(reg & BIT(cpu_port))) 1709 reg |= BIT(cpu_port); 1710 b53_write16(dev, B53_VLAN_PAGE, B53_JOIN_ALL_VLAN_EN, reg); 1711 } else { 1712 b53_get_vlan_entry(dev, pvid, vl); 1713 vl->members |= BIT(port) | BIT(cpu_port); 1714 vl->untag |= BIT(port) | BIT(cpu_port); 1715 b53_set_vlan_entry(dev, pvid, vl); 1716 } 1717 } 1718 EXPORT_SYMBOL(b53_br_leave); 1719 1720 void b53_br_set_stp_state(struct dsa_switch *ds, int port, u8 state) 1721 { 1722 struct b53_device *dev = ds->priv; 1723 u8 hw_state; 1724 u8 reg; 1725 1726 switch (state) { 1727 case BR_STATE_DISABLED: 1728 hw_state = PORT_CTRL_DIS_STATE; 1729 break; 1730 case BR_STATE_LISTENING: 1731 hw_state = PORT_CTRL_LISTEN_STATE; 1732 break; 1733 case BR_STATE_LEARNING: 1734 hw_state = PORT_CTRL_LEARN_STATE; 1735 break; 1736 case BR_STATE_FORWARDING: 1737 hw_state = PORT_CTRL_FWD_STATE; 1738 break; 1739 case BR_STATE_BLOCKING: 1740 hw_state = PORT_CTRL_BLOCK_STATE; 1741 break; 1742 default: 1743 dev_err(ds->dev, "invalid STP state: %d\n", state); 1744 return; 1745 } 1746 1747 b53_read8(dev, B53_CTRL_PAGE, B53_PORT_CTRL(port), ®); 1748 reg &= ~PORT_CTRL_STP_STATE_MASK; 1749 reg |= hw_state; 1750 b53_write8(dev, B53_CTRL_PAGE, B53_PORT_CTRL(port), reg); 1751 } 1752 EXPORT_SYMBOL(b53_br_set_stp_state); 1753 1754 void b53_br_fast_age(struct dsa_switch *ds, int port) 1755 { 1756 struct b53_device *dev = ds->priv; 1757 1758 if (b53_fast_age_port(dev, port)) 1759 dev_err(ds->dev, "fast ageing failed\n"); 1760 } 1761 EXPORT_SYMBOL(b53_br_fast_age); 1762 1763 int b53_br_egress_floods(struct dsa_switch *ds, int port, 1764 bool unicast, bool multicast) 1765 { 1766 struct b53_device *dev = ds->priv; 1767 u16 uc, mc; 1768 1769 b53_read16(dev, B53_CTRL_PAGE, B53_UC_FWD_EN, &uc); 1770 if (unicast) 1771 uc |= BIT(port); 1772 else 1773 uc &= ~BIT(port); 1774 b53_write16(dev, B53_CTRL_PAGE, B53_UC_FWD_EN, uc); 1775 1776 b53_read16(dev, B53_CTRL_PAGE, B53_MC_FWD_EN, &mc); 1777 if (multicast) 1778 mc |= BIT(port); 1779 else 1780 mc &= ~BIT(port); 1781 b53_write16(dev, B53_CTRL_PAGE, B53_MC_FWD_EN, mc); 1782 1783 return 0; 1784 1785 } 1786 EXPORT_SYMBOL(b53_br_egress_floods); 1787 1788 static bool b53_possible_cpu_port(struct dsa_switch *ds, int port) 1789 { 1790 /* Broadcom switches will accept enabling Broadcom tags on the 1791 * following ports: 5, 7 and 8, any other port is not supported 1792 */ 1793 switch (port) { 1794 case B53_CPU_PORT_25: 1795 case 7: 1796 case B53_CPU_PORT: 1797 return true; 1798 } 1799 1800 return false; 1801 } 1802 1803 static bool b53_can_enable_brcm_tags(struct dsa_switch *ds, int port) 1804 { 1805 bool ret = b53_possible_cpu_port(ds, port); 1806 1807 if (!ret) 1808 dev_warn(ds->dev, "Port %d is not Broadcom tag capable\n", 1809 port); 1810 return ret; 1811 } 1812 1813 enum dsa_tag_protocol b53_get_tag_protocol(struct dsa_switch *ds, int port) 1814 { 1815 struct b53_device *dev = ds->priv; 1816 1817 /* Older models (5325, 5365) support a different tag format that we do 1818 * not support in net/dsa/tag_brcm.c yet. 539x and 531x5 require managed 1819 * mode to be turned on which means we need to specifically manage ARL 1820 * misses on multicast addresses (TBD). 1821 */ 1822 if (is5325(dev) || is5365(dev) || is539x(dev) || is531x5(dev) || 1823 !b53_can_enable_brcm_tags(ds, port)) 1824 return DSA_TAG_PROTO_NONE; 1825 1826 /* Broadcom BCM58xx chips have a flow accelerator on Port 8 1827 * which requires us to use the prepended Broadcom tag type 1828 */ 1829 if (dev->chip_id == BCM58XX_DEVICE_ID && port == B53_CPU_PORT) 1830 return DSA_TAG_PROTO_BRCM_PREPEND; 1831 1832 return DSA_TAG_PROTO_BRCM; 1833 } 1834 EXPORT_SYMBOL(b53_get_tag_protocol); 1835 1836 int b53_mirror_add(struct dsa_switch *ds, int port, 1837 struct dsa_mall_mirror_tc_entry *mirror, bool ingress) 1838 { 1839 struct b53_device *dev = ds->priv; 1840 u16 reg, loc; 1841 1842 if (ingress) 1843 loc = B53_IG_MIR_CTL; 1844 else 1845 loc = B53_EG_MIR_CTL; 1846 1847 b53_read16(dev, B53_MGMT_PAGE, loc, ®); 1848 reg &= ~MIRROR_MASK; 1849 reg |= BIT(port); 1850 b53_write16(dev, B53_MGMT_PAGE, loc, reg); 1851 1852 b53_read16(dev, B53_MGMT_PAGE, B53_MIR_CAP_CTL, ®); 1853 reg &= ~CAP_PORT_MASK; 1854 reg |= mirror->to_local_port; 1855 reg |= MIRROR_EN; 1856 b53_write16(dev, B53_MGMT_PAGE, B53_MIR_CAP_CTL, reg); 1857 1858 return 0; 1859 } 1860 EXPORT_SYMBOL(b53_mirror_add); 1861 1862 void b53_mirror_del(struct dsa_switch *ds, int port, 1863 struct dsa_mall_mirror_tc_entry *mirror) 1864 { 1865 struct b53_device *dev = ds->priv; 1866 bool loc_disable = false, other_loc_disable = false; 1867 u16 reg, loc; 1868 1869 if (mirror->ingress) 1870 loc = B53_IG_MIR_CTL; 1871 else 1872 loc = B53_EG_MIR_CTL; 1873 1874 /* Update the desired ingress/egress register */ 1875 b53_read16(dev, B53_MGMT_PAGE, loc, ®); 1876 reg &= ~BIT(port); 1877 if (!(reg & MIRROR_MASK)) 1878 loc_disable = true; 1879 b53_write16(dev, B53_MGMT_PAGE, loc, reg); 1880 1881 /* Now look at the other one to know if we can disable mirroring 1882 * entirely 1883 */ 1884 if (mirror->ingress) 1885 b53_read16(dev, B53_MGMT_PAGE, B53_EG_MIR_CTL, ®); 1886 else 1887 b53_read16(dev, B53_MGMT_PAGE, B53_IG_MIR_CTL, ®); 1888 if (!(reg & MIRROR_MASK)) 1889 other_loc_disable = true; 1890 1891 b53_read16(dev, B53_MGMT_PAGE, B53_MIR_CAP_CTL, ®); 1892 /* Both no longer have ports, let's disable mirroring */ 1893 if (loc_disable && other_loc_disable) { 1894 reg &= ~MIRROR_EN; 1895 reg &= ~mirror->to_local_port; 1896 } 1897 b53_write16(dev, B53_MGMT_PAGE, B53_MIR_CAP_CTL, reg); 1898 } 1899 EXPORT_SYMBOL(b53_mirror_del); 1900 1901 void b53_eee_enable_set(struct dsa_switch *ds, int port, bool enable) 1902 { 1903 struct b53_device *dev = ds->priv; 1904 u16 reg; 1905 1906 b53_read16(dev, B53_EEE_PAGE, B53_EEE_EN_CTRL, ®); 1907 if (enable) 1908 reg |= BIT(port); 1909 else 1910 reg &= ~BIT(port); 1911 b53_write16(dev, B53_EEE_PAGE, B53_EEE_EN_CTRL, reg); 1912 } 1913 EXPORT_SYMBOL(b53_eee_enable_set); 1914 1915 1916 /* Returns 0 if EEE was not enabled, or 1 otherwise 1917 */ 1918 int b53_eee_init(struct dsa_switch *ds, int port, struct phy_device *phy) 1919 { 1920 int ret; 1921 1922 ret = phy_init_eee(phy, 0); 1923 if (ret) 1924 return 0; 1925 1926 b53_eee_enable_set(ds, port, true); 1927 1928 return 1; 1929 } 1930 EXPORT_SYMBOL(b53_eee_init); 1931 1932 int b53_get_mac_eee(struct dsa_switch *ds, int port, struct ethtool_eee *e) 1933 { 1934 struct b53_device *dev = ds->priv; 1935 struct ethtool_eee *p = &dev->ports[port].eee; 1936 u16 reg; 1937 1938 if (is5325(dev) || is5365(dev)) 1939 return -EOPNOTSUPP; 1940 1941 b53_read16(dev, B53_EEE_PAGE, B53_EEE_LPI_INDICATE, ®); 1942 e->eee_enabled = p->eee_enabled; 1943 e->eee_active = !!(reg & BIT(port)); 1944 1945 return 0; 1946 } 1947 EXPORT_SYMBOL(b53_get_mac_eee); 1948 1949 int b53_set_mac_eee(struct dsa_switch *ds, int port, struct ethtool_eee *e) 1950 { 1951 struct b53_device *dev = ds->priv; 1952 struct ethtool_eee *p = &dev->ports[port].eee; 1953 1954 if (is5325(dev) || is5365(dev)) 1955 return -EOPNOTSUPP; 1956 1957 p->eee_enabled = e->eee_enabled; 1958 b53_eee_enable_set(ds, port, e->eee_enabled); 1959 1960 return 0; 1961 } 1962 EXPORT_SYMBOL(b53_set_mac_eee); 1963 1964 static const struct dsa_switch_ops b53_switch_ops = { 1965 .get_tag_protocol = b53_get_tag_protocol, 1966 .setup = b53_setup, 1967 .get_strings = b53_get_strings, 1968 .get_ethtool_stats = b53_get_ethtool_stats, 1969 .get_sset_count = b53_get_sset_count, 1970 .get_ethtool_phy_stats = b53_get_ethtool_phy_stats, 1971 .phy_read = b53_phy_read16, 1972 .phy_write = b53_phy_write16, 1973 .adjust_link = b53_adjust_link, 1974 .phylink_validate = b53_phylink_validate, 1975 .phylink_mac_link_state = b53_phylink_mac_link_state, 1976 .phylink_mac_config = b53_phylink_mac_config, 1977 .phylink_mac_an_restart = b53_phylink_mac_an_restart, 1978 .phylink_mac_link_down = b53_phylink_mac_link_down, 1979 .phylink_mac_link_up = b53_phylink_mac_link_up, 1980 .port_enable = b53_enable_port, 1981 .port_disable = b53_disable_port, 1982 .get_mac_eee = b53_get_mac_eee, 1983 .set_mac_eee = b53_set_mac_eee, 1984 .port_bridge_join = b53_br_join, 1985 .port_bridge_leave = b53_br_leave, 1986 .port_stp_state_set = b53_br_set_stp_state, 1987 .port_fast_age = b53_br_fast_age, 1988 .port_egress_floods = b53_br_egress_floods, 1989 .port_vlan_filtering = b53_vlan_filtering, 1990 .port_vlan_prepare = b53_vlan_prepare, 1991 .port_vlan_add = b53_vlan_add, 1992 .port_vlan_del = b53_vlan_del, 1993 .port_fdb_dump = b53_fdb_dump, 1994 .port_fdb_add = b53_fdb_add, 1995 .port_fdb_del = b53_fdb_del, 1996 .port_mirror_add = b53_mirror_add, 1997 .port_mirror_del = b53_mirror_del, 1998 }; 1999 2000 struct b53_chip_data { 2001 u32 chip_id; 2002 const char *dev_name; 2003 u16 vlans; 2004 u16 enabled_ports; 2005 u8 cpu_port; 2006 u8 vta_regs[3]; 2007 u8 arl_entries; 2008 u8 duplex_reg; 2009 u8 jumbo_pm_reg; 2010 u8 jumbo_size_reg; 2011 }; 2012 2013 #define B53_VTA_REGS \ 2014 { B53_VT_ACCESS, B53_VT_INDEX, B53_VT_ENTRY } 2015 #define B53_VTA_REGS_9798 \ 2016 { B53_VT_ACCESS_9798, B53_VT_INDEX_9798, B53_VT_ENTRY_9798 } 2017 #define B53_VTA_REGS_63XX \ 2018 { B53_VT_ACCESS_63XX, B53_VT_INDEX_63XX, B53_VT_ENTRY_63XX } 2019 2020 static const struct b53_chip_data b53_switch_chips[] = { 2021 { 2022 .chip_id = BCM5325_DEVICE_ID, 2023 .dev_name = "BCM5325", 2024 .vlans = 16, 2025 .enabled_ports = 0x1f, 2026 .arl_entries = 2, 2027 .cpu_port = B53_CPU_PORT_25, 2028 .duplex_reg = B53_DUPLEX_STAT_FE, 2029 }, 2030 { 2031 .chip_id = BCM5365_DEVICE_ID, 2032 .dev_name = "BCM5365", 2033 .vlans = 256, 2034 .enabled_ports = 0x1f, 2035 .arl_entries = 2, 2036 .cpu_port = B53_CPU_PORT_25, 2037 .duplex_reg = B53_DUPLEX_STAT_FE, 2038 }, 2039 { 2040 .chip_id = BCM5389_DEVICE_ID, 2041 .dev_name = "BCM5389", 2042 .vlans = 4096, 2043 .enabled_ports = 0x1f, 2044 .arl_entries = 4, 2045 .cpu_port = B53_CPU_PORT, 2046 .vta_regs = B53_VTA_REGS, 2047 .duplex_reg = B53_DUPLEX_STAT_GE, 2048 .jumbo_pm_reg = B53_JUMBO_PORT_MASK, 2049 .jumbo_size_reg = B53_JUMBO_MAX_SIZE, 2050 }, 2051 { 2052 .chip_id = BCM5395_DEVICE_ID, 2053 .dev_name = "BCM5395", 2054 .vlans = 4096, 2055 .enabled_ports = 0x1f, 2056 .arl_entries = 4, 2057 .cpu_port = B53_CPU_PORT, 2058 .vta_regs = B53_VTA_REGS, 2059 .duplex_reg = B53_DUPLEX_STAT_GE, 2060 .jumbo_pm_reg = B53_JUMBO_PORT_MASK, 2061 .jumbo_size_reg = B53_JUMBO_MAX_SIZE, 2062 }, 2063 { 2064 .chip_id = BCM5397_DEVICE_ID, 2065 .dev_name = "BCM5397", 2066 .vlans = 4096, 2067 .enabled_ports = 0x1f, 2068 .arl_entries = 4, 2069 .cpu_port = B53_CPU_PORT, 2070 .vta_regs = B53_VTA_REGS_9798, 2071 .duplex_reg = B53_DUPLEX_STAT_GE, 2072 .jumbo_pm_reg = B53_JUMBO_PORT_MASK, 2073 .jumbo_size_reg = B53_JUMBO_MAX_SIZE, 2074 }, 2075 { 2076 .chip_id = BCM5398_DEVICE_ID, 2077 .dev_name = "BCM5398", 2078 .vlans = 4096, 2079 .enabled_ports = 0x7f, 2080 .arl_entries = 4, 2081 .cpu_port = B53_CPU_PORT, 2082 .vta_regs = B53_VTA_REGS_9798, 2083 .duplex_reg = B53_DUPLEX_STAT_GE, 2084 .jumbo_pm_reg = B53_JUMBO_PORT_MASK, 2085 .jumbo_size_reg = B53_JUMBO_MAX_SIZE, 2086 }, 2087 { 2088 .chip_id = BCM53115_DEVICE_ID, 2089 .dev_name = "BCM53115", 2090 .vlans = 4096, 2091 .enabled_ports = 0x1f, 2092 .arl_entries = 4, 2093 .vta_regs = B53_VTA_REGS, 2094 .cpu_port = B53_CPU_PORT, 2095 .duplex_reg = B53_DUPLEX_STAT_GE, 2096 .jumbo_pm_reg = B53_JUMBO_PORT_MASK, 2097 .jumbo_size_reg = B53_JUMBO_MAX_SIZE, 2098 }, 2099 { 2100 .chip_id = BCM53125_DEVICE_ID, 2101 .dev_name = "BCM53125", 2102 .vlans = 4096, 2103 .enabled_ports = 0xff, 2104 .arl_entries = 4, 2105 .cpu_port = B53_CPU_PORT, 2106 .vta_regs = B53_VTA_REGS, 2107 .duplex_reg = B53_DUPLEX_STAT_GE, 2108 .jumbo_pm_reg = B53_JUMBO_PORT_MASK, 2109 .jumbo_size_reg = B53_JUMBO_MAX_SIZE, 2110 }, 2111 { 2112 .chip_id = BCM53128_DEVICE_ID, 2113 .dev_name = "BCM53128", 2114 .vlans = 4096, 2115 .enabled_ports = 0x1ff, 2116 .arl_entries = 4, 2117 .cpu_port = B53_CPU_PORT, 2118 .vta_regs = B53_VTA_REGS, 2119 .duplex_reg = B53_DUPLEX_STAT_GE, 2120 .jumbo_pm_reg = B53_JUMBO_PORT_MASK, 2121 .jumbo_size_reg = B53_JUMBO_MAX_SIZE, 2122 }, 2123 { 2124 .chip_id = BCM63XX_DEVICE_ID, 2125 .dev_name = "BCM63xx", 2126 .vlans = 4096, 2127 .enabled_ports = 0, /* pdata must provide them */ 2128 .arl_entries = 4, 2129 .cpu_port = B53_CPU_PORT, 2130 .vta_regs = B53_VTA_REGS_63XX, 2131 .duplex_reg = B53_DUPLEX_STAT_63XX, 2132 .jumbo_pm_reg = B53_JUMBO_PORT_MASK_63XX, 2133 .jumbo_size_reg = B53_JUMBO_MAX_SIZE_63XX, 2134 }, 2135 { 2136 .chip_id = BCM53010_DEVICE_ID, 2137 .dev_name = "BCM53010", 2138 .vlans = 4096, 2139 .enabled_ports = 0x1f, 2140 .arl_entries = 4, 2141 .cpu_port = B53_CPU_PORT_25, /* TODO: auto detect */ 2142 .vta_regs = B53_VTA_REGS, 2143 .duplex_reg = B53_DUPLEX_STAT_GE, 2144 .jumbo_pm_reg = B53_JUMBO_PORT_MASK, 2145 .jumbo_size_reg = B53_JUMBO_MAX_SIZE, 2146 }, 2147 { 2148 .chip_id = BCM53011_DEVICE_ID, 2149 .dev_name = "BCM53011", 2150 .vlans = 4096, 2151 .enabled_ports = 0x1bf, 2152 .arl_entries = 4, 2153 .cpu_port = B53_CPU_PORT_25, /* TODO: auto detect */ 2154 .vta_regs = B53_VTA_REGS, 2155 .duplex_reg = B53_DUPLEX_STAT_GE, 2156 .jumbo_pm_reg = B53_JUMBO_PORT_MASK, 2157 .jumbo_size_reg = B53_JUMBO_MAX_SIZE, 2158 }, 2159 { 2160 .chip_id = BCM53012_DEVICE_ID, 2161 .dev_name = "BCM53012", 2162 .vlans = 4096, 2163 .enabled_ports = 0x1bf, 2164 .arl_entries = 4, 2165 .cpu_port = B53_CPU_PORT_25, /* TODO: auto detect */ 2166 .vta_regs = B53_VTA_REGS, 2167 .duplex_reg = B53_DUPLEX_STAT_GE, 2168 .jumbo_pm_reg = B53_JUMBO_PORT_MASK, 2169 .jumbo_size_reg = B53_JUMBO_MAX_SIZE, 2170 }, 2171 { 2172 .chip_id = BCM53018_DEVICE_ID, 2173 .dev_name = "BCM53018", 2174 .vlans = 4096, 2175 .enabled_ports = 0x1f, 2176 .arl_entries = 4, 2177 .cpu_port = B53_CPU_PORT_25, /* TODO: auto detect */ 2178 .vta_regs = B53_VTA_REGS, 2179 .duplex_reg = B53_DUPLEX_STAT_GE, 2180 .jumbo_pm_reg = B53_JUMBO_PORT_MASK, 2181 .jumbo_size_reg = B53_JUMBO_MAX_SIZE, 2182 }, 2183 { 2184 .chip_id = BCM53019_DEVICE_ID, 2185 .dev_name = "BCM53019", 2186 .vlans = 4096, 2187 .enabled_ports = 0x1f, 2188 .arl_entries = 4, 2189 .cpu_port = B53_CPU_PORT_25, /* TODO: auto detect */ 2190 .vta_regs = B53_VTA_REGS, 2191 .duplex_reg = B53_DUPLEX_STAT_GE, 2192 .jumbo_pm_reg = B53_JUMBO_PORT_MASK, 2193 .jumbo_size_reg = B53_JUMBO_MAX_SIZE, 2194 }, 2195 { 2196 .chip_id = BCM58XX_DEVICE_ID, 2197 .dev_name = "BCM585xx/586xx/88312", 2198 .vlans = 4096, 2199 .enabled_ports = 0x1ff, 2200 .arl_entries = 4, 2201 .cpu_port = B53_CPU_PORT, 2202 .vta_regs = B53_VTA_REGS, 2203 .duplex_reg = B53_DUPLEX_STAT_GE, 2204 .jumbo_pm_reg = B53_JUMBO_PORT_MASK, 2205 .jumbo_size_reg = B53_JUMBO_MAX_SIZE, 2206 }, 2207 { 2208 .chip_id = BCM583XX_DEVICE_ID, 2209 .dev_name = "BCM583xx/11360", 2210 .vlans = 4096, 2211 .enabled_ports = 0x103, 2212 .arl_entries = 4, 2213 .cpu_port = B53_CPU_PORT, 2214 .vta_regs = B53_VTA_REGS, 2215 .duplex_reg = B53_DUPLEX_STAT_GE, 2216 .jumbo_pm_reg = B53_JUMBO_PORT_MASK, 2217 .jumbo_size_reg = B53_JUMBO_MAX_SIZE, 2218 }, 2219 { 2220 .chip_id = BCM7445_DEVICE_ID, 2221 .dev_name = "BCM7445", 2222 .vlans = 4096, 2223 .enabled_ports = 0x1ff, 2224 .arl_entries = 4, 2225 .cpu_port = B53_CPU_PORT, 2226 .vta_regs = B53_VTA_REGS, 2227 .duplex_reg = B53_DUPLEX_STAT_GE, 2228 .jumbo_pm_reg = B53_JUMBO_PORT_MASK, 2229 .jumbo_size_reg = B53_JUMBO_MAX_SIZE, 2230 }, 2231 { 2232 .chip_id = BCM7278_DEVICE_ID, 2233 .dev_name = "BCM7278", 2234 .vlans = 4096, 2235 .enabled_ports = 0x1ff, 2236 .arl_entries= 4, 2237 .cpu_port = B53_CPU_PORT, 2238 .vta_regs = B53_VTA_REGS, 2239 .duplex_reg = B53_DUPLEX_STAT_GE, 2240 .jumbo_pm_reg = B53_JUMBO_PORT_MASK, 2241 .jumbo_size_reg = B53_JUMBO_MAX_SIZE, 2242 }, 2243 }; 2244 2245 static int b53_switch_init(struct b53_device *dev) 2246 { 2247 unsigned int i; 2248 int ret; 2249 2250 for (i = 0; i < ARRAY_SIZE(b53_switch_chips); i++) { 2251 const struct b53_chip_data *chip = &b53_switch_chips[i]; 2252 2253 if (chip->chip_id == dev->chip_id) { 2254 if (!dev->enabled_ports) 2255 dev->enabled_ports = chip->enabled_ports; 2256 dev->name = chip->dev_name; 2257 dev->duplex_reg = chip->duplex_reg; 2258 dev->vta_regs[0] = chip->vta_regs[0]; 2259 dev->vta_regs[1] = chip->vta_regs[1]; 2260 dev->vta_regs[2] = chip->vta_regs[2]; 2261 dev->jumbo_pm_reg = chip->jumbo_pm_reg; 2262 dev->cpu_port = chip->cpu_port; 2263 dev->num_vlans = chip->vlans; 2264 dev->num_arl_entries = chip->arl_entries; 2265 break; 2266 } 2267 } 2268 2269 /* check which BCM5325x version we have */ 2270 if (is5325(dev)) { 2271 u8 vc4; 2272 2273 b53_read8(dev, B53_VLAN_PAGE, B53_VLAN_CTRL4_25, &vc4); 2274 2275 /* check reserved bits */ 2276 switch (vc4 & 3) { 2277 case 1: 2278 /* BCM5325E */ 2279 break; 2280 case 3: 2281 /* BCM5325F - do not use port 4 */ 2282 dev->enabled_ports &= ~BIT(4); 2283 break; 2284 default: 2285 /* On the BCM47XX SoCs this is the supported internal switch.*/ 2286 #ifndef CONFIG_BCM47XX 2287 /* BCM5325M */ 2288 return -EINVAL; 2289 #else 2290 break; 2291 #endif 2292 } 2293 } else if (dev->chip_id == BCM53115_DEVICE_ID) { 2294 u64 strap_value; 2295 2296 b53_read48(dev, B53_STAT_PAGE, B53_STRAP_VALUE, &strap_value); 2297 /* use second IMP port if GMII is enabled */ 2298 if (strap_value & SV_GMII_CTRL_115) 2299 dev->cpu_port = 5; 2300 } 2301 2302 /* cpu port is always last */ 2303 dev->num_ports = dev->cpu_port + 1; 2304 dev->enabled_ports |= BIT(dev->cpu_port); 2305 2306 /* Include non standard CPU port built-in PHYs to be probed */ 2307 if (is539x(dev) || is531x5(dev)) { 2308 for (i = 0; i < dev->num_ports; i++) { 2309 if (!(dev->ds->phys_mii_mask & BIT(i)) && 2310 !b53_possible_cpu_port(dev->ds, i)) 2311 dev->ds->phys_mii_mask |= BIT(i); 2312 } 2313 } 2314 2315 dev->ports = devm_kcalloc(dev->dev, 2316 dev->num_ports, sizeof(struct b53_port), 2317 GFP_KERNEL); 2318 if (!dev->ports) 2319 return -ENOMEM; 2320 2321 dev->vlans = devm_kcalloc(dev->dev, 2322 dev->num_vlans, sizeof(struct b53_vlan), 2323 GFP_KERNEL); 2324 if (!dev->vlans) 2325 return -ENOMEM; 2326 2327 dev->reset_gpio = b53_switch_get_reset_gpio(dev); 2328 if (dev->reset_gpio >= 0) { 2329 ret = devm_gpio_request_one(dev->dev, dev->reset_gpio, 2330 GPIOF_OUT_INIT_HIGH, "robo_reset"); 2331 if (ret) 2332 return ret; 2333 } 2334 2335 return 0; 2336 } 2337 2338 struct b53_device *b53_switch_alloc(struct device *base, 2339 const struct b53_io_ops *ops, 2340 void *priv) 2341 { 2342 struct dsa_switch *ds; 2343 struct b53_device *dev; 2344 2345 ds = dsa_switch_alloc(base, DSA_MAX_PORTS); 2346 if (!ds) 2347 return NULL; 2348 2349 dev = devm_kzalloc(base, sizeof(*dev), GFP_KERNEL); 2350 if (!dev) 2351 return NULL; 2352 2353 ds->priv = dev; 2354 dev->dev = base; 2355 2356 dev->ds = ds; 2357 dev->priv = priv; 2358 dev->ops = ops; 2359 ds->ops = &b53_switch_ops; 2360 mutex_init(&dev->reg_mutex); 2361 mutex_init(&dev->stats_mutex); 2362 2363 return dev; 2364 } 2365 EXPORT_SYMBOL(b53_switch_alloc); 2366 2367 int b53_switch_detect(struct b53_device *dev) 2368 { 2369 u32 id32; 2370 u16 tmp; 2371 u8 id8; 2372 int ret; 2373 2374 ret = b53_read8(dev, B53_MGMT_PAGE, B53_DEVICE_ID, &id8); 2375 if (ret) 2376 return ret; 2377 2378 switch (id8) { 2379 case 0: 2380 /* BCM5325 and BCM5365 do not have this register so reads 2381 * return 0. But the read operation did succeed, so assume this 2382 * is one of them. 2383 * 2384 * Next check if we can write to the 5325's VTA register; for 2385 * 5365 it is read only. 2386 */ 2387 b53_write16(dev, B53_VLAN_PAGE, B53_VLAN_TABLE_ACCESS_25, 0xf); 2388 b53_read16(dev, B53_VLAN_PAGE, B53_VLAN_TABLE_ACCESS_25, &tmp); 2389 2390 if (tmp == 0xf) 2391 dev->chip_id = BCM5325_DEVICE_ID; 2392 else 2393 dev->chip_id = BCM5365_DEVICE_ID; 2394 break; 2395 case BCM5389_DEVICE_ID: 2396 case BCM5395_DEVICE_ID: 2397 case BCM5397_DEVICE_ID: 2398 case BCM5398_DEVICE_ID: 2399 dev->chip_id = id8; 2400 break; 2401 default: 2402 ret = b53_read32(dev, B53_MGMT_PAGE, B53_DEVICE_ID, &id32); 2403 if (ret) 2404 return ret; 2405 2406 switch (id32) { 2407 case BCM53115_DEVICE_ID: 2408 case BCM53125_DEVICE_ID: 2409 case BCM53128_DEVICE_ID: 2410 case BCM53010_DEVICE_ID: 2411 case BCM53011_DEVICE_ID: 2412 case BCM53012_DEVICE_ID: 2413 case BCM53018_DEVICE_ID: 2414 case BCM53019_DEVICE_ID: 2415 dev->chip_id = id32; 2416 break; 2417 default: 2418 pr_err("unsupported switch detected (BCM53%02x/BCM%x)\n", 2419 id8, id32); 2420 return -ENODEV; 2421 } 2422 } 2423 2424 if (dev->chip_id == BCM5325_DEVICE_ID) 2425 return b53_read8(dev, B53_STAT_PAGE, B53_REV_ID_25, 2426 &dev->core_rev); 2427 else 2428 return b53_read8(dev, B53_MGMT_PAGE, B53_REV_ID, 2429 &dev->core_rev); 2430 } 2431 EXPORT_SYMBOL(b53_switch_detect); 2432 2433 int b53_switch_register(struct b53_device *dev) 2434 { 2435 int ret; 2436 2437 if (dev->pdata) { 2438 dev->chip_id = dev->pdata->chip_id; 2439 dev->enabled_ports = dev->pdata->enabled_ports; 2440 } 2441 2442 if (!dev->chip_id && b53_switch_detect(dev)) 2443 return -EINVAL; 2444 2445 ret = b53_switch_init(dev); 2446 if (ret) 2447 return ret; 2448 2449 pr_info("found switch: %s, rev %i\n", dev->name, dev->core_rev); 2450 2451 return dsa_register_switch(dev->ds); 2452 } 2453 EXPORT_SYMBOL(b53_switch_register); 2454 2455 MODULE_AUTHOR("Jonas Gorski <jogo@openwrt.org>"); 2456 MODULE_DESCRIPTION("B53 switch library"); 2457 MODULE_LICENSE("Dual BSD/GPL"); 2458