xref: /openbmc/linux/drivers/net/dsa/b53/b53_common.c (revision 680ef72a)
1 /*
2  * B53 switch driver main logic
3  *
4  * Copyright (C) 2011-2013 Jonas Gorski <jogo@openwrt.org>
5  * Copyright (C) 2016 Florian Fainelli <f.fainelli@gmail.com>
6  *
7  * Permission to use, copy, modify, and/or distribute this software for any
8  * purpose with or without fee is hereby granted, provided that the above
9  * copyright notice and this permission notice appear in all copies.
10  *
11  * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
12  * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
13  * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR
14  * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
15  * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN
16  * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF
17  * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
18  */
19 
20 #define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
21 
22 #include <linux/delay.h>
23 #include <linux/export.h>
24 #include <linux/gpio.h>
25 #include <linux/kernel.h>
26 #include <linux/module.h>
27 #include <linux/platform_data/b53.h>
28 #include <linux/phy.h>
29 #include <linux/etherdevice.h>
30 #include <linux/if_bridge.h>
31 #include <net/dsa.h>
32 
33 #include "b53_regs.h"
34 #include "b53_priv.h"
35 
36 struct b53_mib_desc {
37 	u8 size;
38 	u8 offset;
39 	const char *name;
40 };
41 
42 /* BCM5365 MIB counters */
43 static const struct b53_mib_desc b53_mibs_65[] = {
44 	{ 8, 0x00, "TxOctets" },
45 	{ 4, 0x08, "TxDropPkts" },
46 	{ 4, 0x10, "TxBroadcastPkts" },
47 	{ 4, 0x14, "TxMulticastPkts" },
48 	{ 4, 0x18, "TxUnicastPkts" },
49 	{ 4, 0x1c, "TxCollisions" },
50 	{ 4, 0x20, "TxSingleCollision" },
51 	{ 4, 0x24, "TxMultipleCollision" },
52 	{ 4, 0x28, "TxDeferredTransmit" },
53 	{ 4, 0x2c, "TxLateCollision" },
54 	{ 4, 0x30, "TxExcessiveCollision" },
55 	{ 4, 0x38, "TxPausePkts" },
56 	{ 8, 0x44, "RxOctets" },
57 	{ 4, 0x4c, "RxUndersizePkts" },
58 	{ 4, 0x50, "RxPausePkts" },
59 	{ 4, 0x54, "Pkts64Octets" },
60 	{ 4, 0x58, "Pkts65to127Octets" },
61 	{ 4, 0x5c, "Pkts128to255Octets" },
62 	{ 4, 0x60, "Pkts256to511Octets" },
63 	{ 4, 0x64, "Pkts512to1023Octets" },
64 	{ 4, 0x68, "Pkts1024to1522Octets" },
65 	{ 4, 0x6c, "RxOversizePkts" },
66 	{ 4, 0x70, "RxJabbers" },
67 	{ 4, 0x74, "RxAlignmentErrors" },
68 	{ 4, 0x78, "RxFCSErrors" },
69 	{ 8, 0x7c, "RxGoodOctets" },
70 	{ 4, 0x84, "RxDropPkts" },
71 	{ 4, 0x88, "RxUnicastPkts" },
72 	{ 4, 0x8c, "RxMulticastPkts" },
73 	{ 4, 0x90, "RxBroadcastPkts" },
74 	{ 4, 0x94, "RxSAChanges" },
75 	{ 4, 0x98, "RxFragments" },
76 };
77 
78 #define B53_MIBS_65_SIZE	ARRAY_SIZE(b53_mibs_65)
79 
80 /* BCM63xx MIB counters */
81 static const struct b53_mib_desc b53_mibs_63xx[] = {
82 	{ 8, 0x00, "TxOctets" },
83 	{ 4, 0x08, "TxDropPkts" },
84 	{ 4, 0x0c, "TxQoSPkts" },
85 	{ 4, 0x10, "TxBroadcastPkts" },
86 	{ 4, 0x14, "TxMulticastPkts" },
87 	{ 4, 0x18, "TxUnicastPkts" },
88 	{ 4, 0x1c, "TxCollisions" },
89 	{ 4, 0x20, "TxSingleCollision" },
90 	{ 4, 0x24, "TxMultipleCollision" },
91 	{ 4, 0x28, "TxDeferredTransmit" },
92 	{ 4, 0x2c, "TxLateCollision" },
93 	{ 4, 0x30, "TxExcessiveCollision" },
94 	{ 4, 0x38, "TxPausePkts" },
95 	{ 8, 0x3c, "TxQoSOctets" },
96 	{ 8, 0x44, "RxOctets" },
97 	{ 4, 0x4c, "RxUndersizePkts" },
98 	{ 4, 0x50, "RxPausePkts" },
99 	{ 4, 0x54, "Pkts64Octets" },
100 	{ 4, 0x58, "Pkts65to127Octets" },
101 	{ 4, 0x5c, "Pkts128to255Octets" },
102 	{ 4, 0x60, "Pkts256to511Octets" },
103 	{ 4, 0x64, "Pkts512to1023Octets" },
104 	{ 4, 0x68, "Pkts1024to1522Octets" },
105 	{ 4, 0x6c, "RxOversizePkts" },
106 	{ 4, 0x70, "RxJabbers" },
107 	{ 4, 0x74, "RxAlignmentErrors" },
108 	{ 4, 0x78, "RxFCSErrors" },
109 	{ 8, 0x7c, "RxGoodOctets" },
110 	{ 4, 0x84, "RxDropPkts" },
111 	{ 4, 0x88, "RxUnicastPkts" },
112 	{ 4, 0x8c, "RxMulticastPkts" },
113 	{ 4, 0x90, "RxBroadcastPkts" },
114 	{ 4, 0x94, "RxSAChanges" },
115 	{ 4, 0x98, "RxFragments" },
116 	{ 4, 0xa0, "RxSymbolErrors" },
117 	{ 4, 0xa4, "RxQoSPkts" },
118 	{ 8, 0xa8, "RxQoSOctets" },
119 	{ 4, 0xb0, "Pkts1523to2047Octets" },
120 	{ 4, 0xb4, "Pkts2048to4095Octets" },
121 	{ 4, 0xb8, "Pkts4096to8191Octets" },
122 	{ 4, 0xbc, "Pkts8192to9728Octets" },
123 	{ 4, 0xc0, "RxDiscarded" },
124 };
125 
126 #define B53_MIBS_63XX_SIZE	ARRAY_SIZE(b53_mibs_63xx)
127 
128 /* MIB counters */
129 static const struct b53_mib_desc b53_mibs[] = {
130 	{ 8, 0x00, "TxOctets" },
131 	{ 4, 0x08, "TxDropPkts" },
132 	{ 4, 0x10, "TxBroadcastPkts" },
133 	{ 4, 0x14, "TxMulticastPkts" },
134 	{ 4, 0x18, "TxUnicastPkts" },
135 	{ 4, 0x1c, "TxCollisions" },
136 	{ 4, 0x20, "TxSingleCollision" },
137 	{ 4, 0x24, "TxMultipleCollision" },
138 	{ 4, 0x28, "TxDeferredTransmit" },
139 	{ 4, 0x2c, "TxLateCollision" },
140 	{ 4, 0x30, "TxExcessiveCollision" },
141 	{ 4, 0x38, "TxPausePkts" },
142 	{ 8, 0x50, "RxOctets" },
143 	{ 4, 0x58, "RxUndersizePkts" },
144 	{ 4, 0x5c, "RxPausePkts" },
145 	{ 4, 0x60, "Pkts64Octets" },
146 	{ 4, 0x64, "Pkts65to127Octets" },
147 	{ 4, 0x68, "Pkts128to255Octets" },
148 	{ 4, 0x6c, "Pkts256to511Octets" },
149 	{ 4, 0x70, "Pkts512to1023Octets" },
150 	{ 4, 0x74, "Pkts1024to1522Octets" },
151 	{ 4, 0x78, "RxOversizePkts" },
152 	{ 4, 0x7c, "RxJabbers" },
153 	{ 4, 0x80, "RxAlignmentErrors" },
154 	{ 4, 0x84, "RxFCSErrors" },
155 	{ 8, 0x88, "RxGoodOctets" },
156 	{ 4, 0x90, "RxDropPkts" },
157 	{ 4, 0x94, "RxUnicastPkts" },
158 	{ 4, 0x98, "RxMulticastPkts" },
159 	{ 4, 0x9c, "RxBroadcastPkts" },
160 	{ 4, 0xa0, "RxSAChanges" },
161 	{ 4, 0xa4, "RxFragments" },
162 	{ 4, 0xa8, "RxJumboPkts" },
163 	{ 4, 0xac, "RxSymbolErrors" },
164 	{ 4, 0xc0, "RxDiscarded" },
165 };
166 
167 #define B53_MIBS_SIZE	ARRAY_SIZE(b53_mibs)
168 
169 static const struct b53_mib_desc b53_mibs_58xx[] = {
170 	{ 8, 0x00, "TxOctets" },
171 	{ 4, 0x08, "TxDropPkts" },
172 	{ 4, 0x0c, "TxQPKTQ0" },
173 	{ 4, 0x10, "TxBroadcastPkts" },
174 	{ 4, 0x14, "TxMulticastPkts" },
175 	{ 4, 0x18, "TxUnicastPKts" },
176 	{ 4, 0x1c, "TxCollisions" },
177 	{ 4, 0x20, "TxSingleCollision" },
178 	{ 4, 0x24, "TxMultipleCollision" },
179 	{ 4, 0x28, "TxDeferredCollision" },
180 	{ 4, 0x2c, "TxLateCollision" },
181 	{ 4, 0x30, "TxExcessiveCollision" },
182 	{ 4, 0x34, "TxFrameInDisc" },
183 	{ 4, 0x38, "TxPausePkts" },
184 	{ 4, 0x3c, "TxQPKTQ1" },
185 	{ 4, 0x40, "TxQPKTQ2" },
186 	{ 4, 0x44, "TxQPKTQ3" },
187 	{ 4, 0x48, "TxQPKTQ4" },
188 	{ 4, 0x4c, "TxQPKTQ5" },
189 	{ 8, 0x50, "RxOctets" },
190 	{ 4, 0x58, "RxUndersizePkts" },
191 	{ 4, 0x5c, "RxPausePkts" },
192 	{ 4, 0x60, "RxPkts64Octets" },
193 	{ 4, 0x64, "RxPkts65to127Octets" },
194 	{ 4, 0x68, "RxPkts128to255Octets" },
195 	{ 4, 0x6c, "RxPkts256to511Octets" },
196 	{ 4, 0x70, "RxPkts512to1023Octets" },
197 	{ 4, 0x74, "RxPkts1024toMaxPktsOctets" },
198 	{ 4, 0x78, "RxOversizePkts" },
199 	{ 4, 0x7c, "RxJabbers" },
200 	{ 4, 0x80, "RxAlignmentErrors" },
201 	{ 4, 0x84, "RxFCSErrors" },
202 	{ 8, 0x88, "RxGoodOctets" },
203 	{ 4, 0x90, "RxDropPkts" },
204 	{ 4, 0x94, "RxUnicastPkts" },
205 	{ 4, 0x98, "RxMulticastPkts" },
206 	{ 4, 0x9c, "RxBroadcastPkts" },
207 	{ 4, 0xa0, "RxSAChanges" },
208 	{ 4, 0xa4, "RxFragments" },
209 	{ 4, 0xa8, "RxJumboPkt" },
210 	{ 4, 0xac, "RxSymblErr" },
211 	{ 4, 0xb0, "InRangeErrCount" },
212 	{ 4, 0xb4, "OutRangeErrCount" },
213 	{ 4, 0xb8, "EEELpiEvent" },
214 	{ 4, 0xbc, "EEELpiDuration" },
215 	{ 4, 0xc0, "RxDiscard" },
216 	{ 4, 0xc8, "TxQPKTQ6" },
217 	{ 4, 0xcc, "TxQPKTQ7" },
218 	{ 4, 0xd0, "TxPkts64Octets" },
219 	{ 4, 0xd4, "TxPkts65to127Octets" },
220 	{ 4, 0xd8, "TxPkts128to255Octets" },
221 	{ 4, 0xdc, "TxPkts256to511Ocets" },
222 	{ 4, 0xe0, "TxPkts512to1023Ocets" },
223 	{ 4, 0xe4, "TxPkts1024toMaxPktOcets" },
224 };
225 
226 #define B53_MIBS_58XX_SIZE	ARRAY_SIZE(b53_mibs_58xx)
227 
228 static int b53_do_vlan_op(struct b53_device *dev, u8 op)
229 {
230 	unsigned int i;
231 
232 	b53_write8(dev, B53_ARLIO_PAGE, dev->vta_regs[0], VTA_START_CMD | op);
233 
234 	for (i = 0; i < 10; i++) {
235 		u8 vta;
236 
237 		b53_read8(dev, B53_ARLIO_PAGE, dev->vta_regs[0], &vta);
238 		if (!(vta & VTA_START_CMD))
239 			return 0;
240 
241 		usleep_range(100, 200);
242 	}
243 
244 	return -EIO;
245 }
246 
247 static void b53_set_vlan_entry(struct b53_device *dev, u16 vid,
248 			       struct b53_vlan *vlan)
249 {
250 	if (is5325(dev)) {
251 		u32 entry = 0;
252 
253 		if (vlan->members) {
254 			entry = ((vlan->untag & VA_UNTAG_MASK_25) <<
255 				 VA_UNTAG_S_25) | vlan->members;
256 			if (dev->core_rev >= 3)
257 				entry |= VA_VALID_25_R4 | vid << VA_VID_HIGH_S;
258 			else
259 				entry |= VA_VALID_25;
260 		}
261 
262 		b53_write32(dev, B53_VLAN_PAGE, B53_VLAN_WRITE_25, entry);
263 		b53_write16(dev, B53_VLAN_PAGE, B53_VLAN_TABLE_ACCESS_25, vid |
264 			    VTA_RW_STATE_WR | VTA_RW_OP_EN);
265 	} else if (is5365(dev)) {
266 		u16 entry = 0;
267 
268 		if (vlan->members)
269 			entry = ((vlan->untag & VA_UNTAG_MASK_65) <<
270 				 VA_UNTAG_S_65) | vlan->members | VA_VALID_65;
271 
272 		b53_write16(dev, B53_VLAN_PAGE, B53_VLAN_WRITE_65, entry);
273 		b53_write16(dev, B53_VLAN_PAGE, B53_VLAN_TABLE_ACCESS_65, vid |
274 			    VTA_RW_STATE_WR | VTA_RW_OP_EN);
275 	} else {
276 		b53_write16(dev, B53_ARLIO_PAGE, dev->vta_regs[1], vid);
277 		b53_write32(dev, B53_ARLIO_PAGE, dev->vta_regs[2],
278 			    (vlan->untag << VTE_UNTAG_S) | vlan->members);
279 
280 		b53_do_vlan_op(dev, VTA_CMD_WRITE);
281 	}
282 
283 	dev_dbg(dev->ds->dev, "VID: %d, members: 0x%04x, untag: 0x%04x\n",
284 		vid, vlan->members, vlan->untag);
285 }
286 
287 static void b53_get_vlan_entry(struct b53_device *dev, u16 vid,
288 			       struct b53_vlan *vlan)
289 {
290 	if (is5325(dev)) {
291 		u32 entry = 0;
292 
293 		b53_write16(dev, B53_VLAN_PAGE, B53_VLAN_TABLE_ACCESS_25, vid |
294 			    VTA_RW_STATE_RD | VTA_RW_OP_EN);
295 		b53_read32(dev, B53_VLAN_PAGE, B53_VLAN_WRITE_25, &entry);
296 
297 		if (dev->core_rev >= 3)
298 			vlan->valid = !!(entry & VA_VALID_25_R4);
299 		else
300 			vlan->valid = !!(entry & VA_VALID_25);
301 		vlan->members = entry & VA_MEMBER_MASK;
302 		vlan->untag = (entry >> VA_UNTAG_S_25) & VA_UNTAG_MASK_25;
303 
304 	} else if (is5365(dev)) {
305 		u16 entry = 0;
306 
307 		b53_write16(dev, B53_VLAN_PAGE, B53_VLAN_TABLE_ACCESS_65, vid |
308 			    VTA_RW_STATE_WR | VTA_RW_OP_EN);
309 		b53_read16(dev, B53_VLAN_PAGE, B53_VLAN_WRITE_65, &entry);
310 
311 		vlan->valid = !!(entry & VA_VALID_65);
312 		vlan->members = entry & VA_MEMBER_MASK;
313 		vlan->untag = (entry >> VA_UNTAG_S_65) & VA_UNTAG_MASK_65;
314 	} else {
315 		u32 entry = 0;
316 
317 		b53_write16(dev, B53_ARLIO_PAGE, dev->vta_regs[1], vid);
318 		b53_do_vlan_op(dev, VTA_CMD_READ);
319 		b53_read32(dev, B53_ARLIO_PAGE, dev->vta_regs[2], &entry);
320 		vlan->members = entry & VTE_MEMBERS;
321 		vlan->untag = (entry >> VTE_UNTAG_S) & VTE_MEMBERS;
322 		vlan->valid = true;
323 	}
324 }
325 
326 static void b53_set_forwarding(struct b53_device *dev, int enable)
327 {
328 	u8 mgmt;
329 
330 	b53_read8(dev, B53_CTRL_PAGE, B53_SWITCH_MODE, &mgmt);
331 
332 	if (enable)
333 		mgmt |= SM_SW_FWD_EN;
334 	else
335 		mgmt &= ~SM_SW_FWD_EN;
336 
337 	b53_write8(dev, B53_CTRL_PAGE, B53_SWITCH_MODE, mgmt);
338 
339 	/* Include IMP port in dumb forwarding mode
340 	 */
341 	b53_read8(dev, B53_CTRL_PAGE, B53_SWITCH_CTRL, &mgmt);
342 	mgmt |= B53_MII_DUMB_FWDG_EN;
343 	b53_write8(dev, B53_CTRL_PAGE, B53_SWITCH_CTRL, mgmt);
344 }
345 
346 static void b53_enable_vlan(struct b53_device *dev, bool enable)
347 {
348 	u8 mgmt, vc0, vc1, vc4 = 0, vc5;
349 
350 	b53_read8(dev, B53_CTRL_PAGE, B53_SWITCH_MODE, &mgmt);
351 	b53_read8(dev, B53_VLAN_PAGE, B53_VLAN_CTRL0, &vc0);
352 	b53_read8(dev, B53_VLAN_PAGE, B53_VLAN_CTRL1, &vc1);
353 
354 	if (is5325(dev) || is5365(dev)) {
355 		b53_read8(dev, B53_VLAN_PAGE, B53_VLAN_CTRL4_25, &vc4);
356 		b53_read8(dev, B53_VLAN_PAGE, B53_VLAN_CTRL5_25, &vc5);
357 	} else if (is63xx(dev)) {
358 		b53_read8(dev, B53_VLAN_PAGE, B53_VLAN_CTRL4_63XX, &vc4);
359 		b53_read8(dev, B53_VLAN_PAGE, B53_VLAN_CTRL5_63XX, &vc5);
360 	} else {
361 		b53_read8(dev, B53_VLAN_PAGE, B53_VLAN_CTRL4, &vc4);
362 		b53_read8(dev, B53_VLAN_PAGE, B53_VLAN_CTRL5, &vc5);
363 	}
364 
365 	mgmt &= ~SM_SW_FWD_MODE;
366 
367 	if (enable) {
368 		vc0 |= VC0_VLAN_EN | VC0_VID_CHK_EN | VC0_VID_HASH_VID;
369 		vc1 |= VC1_RX_MCST_UNTAG_EN | VC1_RX_MCST_FWD_EN;
370 		vc4 &= ~VC4_ING_VID_CHECK_MASK;
371 		vc4 |= VC4_ING_VID_VIO_DROP << VC4_ING_VID_CHECK_S;
372 		vc5 |= VC5_DROP_VTABLE_MISS;
373 
374 		if (is5325(dev))
375 			vc0 &= ~VC0_RESERVED_1;
376 
377 		if (is5325(dev) || is5365(dev))
378 			vc1 |= VC1_RX_MCST_TAG_EN;
379 
380 	} else {
381 		vc0 &= ~(VC0_VLAN_EN | VC0_VID_CHK_EN | VC0_VID_HASH_VID);
382 		vc1 &= ~(VC1_RX_MCST_UNTAG_EN | VC1_RX_MCST_FWD_EN);
383 		vc4 &= ~VC4_ING_VID_CHECK_MASK;
384 		vc5 &= ~VC5_DROP_VTABLE_MISS;
385 
386 		if (is5325(dev) || is5365(dev))
387 			vc4 |= VC4_ING_VID_VIO_FWD << VC4_ING_VID_CHECK_S;
388 		else
389 			vc4 |= VC4_ING_VID_VIO_TO_IMP << VC4_ING_VID_CHECK_S;
390 
391 		if (is5325(dev) || is5365(dev))
392 			vc1 &= ~VC1_RX_MCST_TAG_EN;
393 	}
394 
395 	if (!is5325(dev) && !is5365(dev))
396 		vc5 &= ~VC5_VID_FFF_EN;
397 
398 	b53_write8(dev, B53_VLAN_PAGE, B53_VLAN_CTRL0, vc0);
399 	b53_write8(dev, B53_VLAN_PAGE, B53_VLAN_CTRL1, vc1);
400 
401 	if (is5325(dev) || is5365(dev)) {
402 		/* enable the high 8 bit vid check on 5325 */
403 		if (is5325(dev) && enable)
404 			b53_write8(dev, B53_VLAN_PAGE, B53_VLAN_CTRL3,
405 				   VC3_HIGH_8BIT_EN);
406 		else
407 			b53_write8(dev, B53_VLAN_PAGE, B53_VLAN_CTRL3, 0);
408 
409 		b53_write8(dev, B53_VLAN_PAGE, B53_VLAN_CTRL4_25, vc4);
410 		b53_write8(dev, B53_VLAN_PAGE, B53_VLAN_CTRL5_25, vc5);
411 	} else if (is63xx(dev)) {
412 		b53_write16(dev, B53_VLAN_PAGE, B53_VLAN_CTRL3_63XX, 0);
413 		b53_write8(dev, B53_VLAN_PAGE, B53_VLAN_CTRL4_63XX, vc4);
414 		b53_write8(dev, B53_VLAN_PAGE, B53_VLAN_CTRL5_63XX, vc5);
415 	} else {
416 		b53_write16(dev, B53_VLAN_PAGE, B53_VLAN_CTRL3, 0);
417 		b53_write8(dev, B53_VLAN_PAGE, B53_VLAN_CTRL4, vc4);
418 		b53_write8(dev, B53_VLAN_PAGE, B53_VLAN_CTRL5, vc5);
419 	}
420 
421 	b53_write8(dev, B53_CTRL_PAGE, B53_SWITCH_MODE, mgmt);
422 }
423 
424 static int b53_set_jumbo(struct b53_device *dev, bool enable, bool allow_10_100)
425 {
426 	u32 port_mask = 0;
427 	u16 max_size = JMS_MIN_SIZE;
428 
429 	if (is5325(dev) || is5365(dev))
430 		return -EINVAL;
431 
432 	if (enable) {
433 		port_mask = dev->enabled_ports;
434 		max_size = JMS_MAX_SIZE;
435 		if (allow_10_100)
436 			port_mask |= JPM_10_100_JUMBO_EN;
437 	}
438 
439 	b53_write32(dev, B53_JUMBO_PAGE, dev->jumbo_pm_reg, port_mask);
440 	return b53_write16(dev, B53_JUMBO_PAGE, dev->jumbo_size_reg, max_size);
441 }
442 
443 static int b53_flush_arl(struct b53_device *dev, u8 mask)
444 {
445 	unsigned int i;
446 
447 	b53_write8(dev, B53_CTRL_PAGE, B53_FAST_AGE_CTRL,
448 		   FAST_AGE_DONE | FAST_AGE_DYNAMIC | mask);
449 
450 	for (i = 0; i < 10; i++) {
451 		u8 fast_age_ctrl;
452 
453 		b53_read8(dev, B53_CTRL_PAGE, B53_FAST_AGE_CTRL,
454 			  &fast_age_ctrl);
455 
456 		if (!(fast_age_ctrl & FAST_AGE_DONE))
457 			goto out;
458 
459 		msleep(1);
460 	}
461 
462 	return -ETIMEDOUT;
463 out:
464 	/* Only age dynamic entries (default behavior) */
465 	b53_write8(dev, B53_CTRL_PAGE, B53_FAST_AGE_CTRL, FAST_AGE_DYNAMIC);
466 	return 0;
467 }
468 
469 static int b53_fast_age_port(struct b53_device *dev, int port)
470 {
471 	b53_write8(dev, B53_CTRL_PAGE, B53_FAST_AGE_PORT_CTRL, port);
472 
473 	return b53_flush_arl(dev, FAST_AGE_PORT);
474 }
475 
476 static int b53_fast_age_vlan(struct b53_device *dev, u16 vid)
477 {
478 	b53_write16(dev, B53_CTRL_PAGE, B53_FAST_AGE_VID_CTRL, vid);
479 
480 	return b53_flush_arl(dev, FAST_AGE_VLAN);
481 }
482 
483 void b53_imp_vlan_setup(struct dsa_switch *ds, int cpu_port)
484 {
485 	struct b53_device *dev = ds->priv;
486 	unsigned int i;
487 	u16 pvlan;
488 
489 	/* Enable the IMP port to be in the same VLAN as the other ports
490 	 * on a per-port basis such that we only have Port i and IMP in
491 	 * the same VLAN.
492 	 */
493 	b53_for_each_port(dev, i) {
494 		b53_read16(dev, B53_PVLAN_PAGE, B53_PVLAN_PORT_MASK(i), &pvlan);
495 		pvlan |= BIT(cpu_port);
496 		b53_write16(dev, B53_PVLAN_PAGE, B53_PVLAN_PORT_MASK(i), pvlan);
497 	}
498 }
499 EXPORT_SYMBOL(b53_imp_vlan_setup);
500 
501 int b53_enable_port(struct dsa_switch *ds, int port, struct phy_device *phy)
502 {
503 	struct b53_device *dev = ds->priv;
504 	unsigned int cpu_port = ds->ports[port].cpu_dp->index;
505 	u16 pvlan;
506 
507 	/* Clear the Rx and Tx disable bits and set to no spanning tree */
508 	b53_write8(dev, B53_CTRL_PAGE, B53_PORT_CTRL(port), 0);
509 
510 	/* Set this port, and only this one to be in the default VLAN,
511 	 * if member of a bridge, restore its membership prior to
512 	 * bringing down this port.
513 	 */
514 	b53_read16(dev, B53_PVLAN_PAGE, B53_PVLAN_PORT_MASK(port), &pvlan);
515 	pvlan &= ~0x1ff;
516 	pvlan |= BIT(port);
517 	pvlan |= dev->ports[port].vlan_ctl_mask;
518 	b53_write16(dev, B53_PVLAN_PAGE, B53_PVLAN_PORT_MASK(port), pvlan);
519 
520 	b53_imp_vlan_setup(ds, cpu_port);
521 
522 	/* If EEE was enabled, restore it */
523 	if (dev->ports[port].eee.eee_enabled)
524 		b53_eee_enable_set(ds, port, true);
525 
526 	return 0;
527 }
528 EXPORT_SYMBOL(b53_enable_port);
529 
530 void b53_disable_port(struct dsa_switch *ds, int port, struct phy_device *phy)
531 {
532 	struct b53_device *dev = ds->priv;
533 	u8 reg;
534 
535 	/* Disable Tx/Rx for the port */
536 	b53_read8(dev, B53_CTRL_PAGE, B53_PORT_CTRL(port), &reg);
537 	reg |= PORT_CTRL_RX_DISABLE | PORT_CTRL_TX_DISABLE;
538 	b53_write8(dev, B53_CTRL_PAGE, B53_PORT_CTRL(port), reg);
539 }
540 EXPORT_SYMBOL(b53_disable_port);
541 
542 void b53_brcm_hdr_setup(struct dsa_switch *ds, int port)
543 {
544 	bool tag_en = !(ds->ops->get_tag_protocol(ds, port) ==
545 			 DSA_TAG_PROTO_NONE);
546 	struct b53_device *dev = ds->priv;
547 	u8 hdr_ctl, val;
548 	u16 reg;
549 
550 	/* Resolve which bit controls the Broadcom tag */
551 	switch (port) {
552 	case 8:
553 		val = BRCM_HDR_P8_EN;
554 		break;
555 	case 7:
556 		val = BRCM_HDR_P7_EN;
557 		break;
558 	case 5:
559 		val = BRCM_HDR_P5_EN;
560 		break;
561 	default:
562 		val = 0;
563 		break;
564 	}
565 
566 	/* Enable Broadcom tags for IMP port */
567 	b53_read8(dev, B53_MGMT_PAGE, B53_BRCM_HDR, &hdr_ctl);
568 	if (tag_en)
569 		hdr_ctl |= val;
570 	else
571 		hdr_ctl &= ~val;
572 	b53_write8(dev, B53_MGMT_PAGE, B53_BRCM_HDR, hdr_ctl);
573 
574 	/* Registers below are only accessible on newer devices */
575 	if (!is58xx(dev))
576 		return;
577 
578 	/* Enable reception Broadcom tag for CPU TX (switch RX) to
579 	 * allow us to tag outgoing frames
580 	 */
581 	b53_read16(dev, B53_MGMT_PAGE, B53_BRCM_HDR_RX_DIS, &reg);
582 	if (tag_en)
583 		reg &= ~BIT(port);
584 	else
585 		reg |= BIT(port);
586 	b53_write16(dev, B53_MGMT_PAGE, B53_BRCM_HDR_RX_DIS, reg);
587 
588 	/* Enable transmission of Broadcom tags from the switch (CPU RX) to
589 	 * allow delivering frames to the per-port net_devices
590 	 */
591 	b53_read16(dev, B53_MGMT_PAGE, B53_BRCM_HDR_TX_DIS, &reg);
592 	if (tag_en)
593 		reg &= ~BIT(port);
594 	else
595 		reg |= BIT(port);
596 	b53_write16(dev, B53_MGMT_PAGE, B53_BRCM_HDR_TX_DIS, reg);
597 }
598 EXPORT_SYMBOL(b53_brcm_hdr_setup);
599 
600 static void b53_enable_cpu_port(struct b53_device *dev, int port)
601 {
602 	u8 port_ctrl;
603 
604 	/* BCM5325 CPU port is at 8 */
605 	if ((is5325(dev) || is5365(dev)) && port == B53_CPU_PORT_25)
606 		port = B53_CPU_PORT;
607 
608 	port_ctrl = PORT_CTRL_RX_BCST_EN |
609 		    PORT_CTRL_RX_MCST_EN |
610 		    PORT_CTRL_RX_UCST_EN;
611 	b53_write8(dev, B53_CTRL_PAGE, B53_PORT_CTRL(port), port_ctrl);
612 
613 	b53_brcm_hdr_setup(dev->ds, port);
614 }
615 
616 static void b53_enable_mib(struct b53_device *dev)
617 {
618 	u8 gc;
619 
620 	b53_read8(dev, B53_MGMT_PAGE, B53_GLOBAL_CONFIG, &gc);
621 	gc &= ~(GC_RESET_MIB | GC_MIB_AC_EN);
622 	b53_write8(dev, B53_MGMT_PAGE, B53_GLOBAL_CONFIG, gc);
623 }
624 
625 int b53_configure_vlan(struct dsa_switch *ds)
626 {
627 	struct b53_device *dev = ds->priv;
628 	struct b53_vlan vl = { 0 };
629 	int i;
630 
631 	/* clear all vlan entries */
632 	if (is5325(dev) || is5365(dev)) {
633 		for (i = 1; i < dev->num_vlans; i++)
634 			b53_set_vlan_entry(dev, i, &vl);
635 	} else {
636 		b53_do_vlan_op(dev, VTA_CMD_CLEAR);
637 	}
638 
639 	b53_enable_vlan(dev, false);
640 
641 	b53_for_each_port(dev, i)
642 		b53_write16(dev, B53_VLAN_PAGE,
643 			    B53_VLAN_PORT_DEF_TAG(i), 1);
644 
645 	if (!is5325(dev) && !is5365(dev))
646 		b53_set_jumbo(dev, dev->enable_jumbo, false);
647 
648 	return 0;
649 }
650 EXPORT_SYMBOL(b53_configure_vlan);
651 
652 static void b53_switch_reset_gpio(struct b53_device *dev)
653 {
654 	int gpio = dev->reset_gpio;
655 
656 	if (gpio < 0)
657 		return;
658 
659 	/* Reset sequence: RESET low(50ms)->high(20ms)
660 	 */
661 	gpio_set_value(gpio, 0);
662 	mdelay(50);
663 
664 	gpio_set_value(gpio, 1);
665 	mdelay(20);
666 
667 	dev->current_page = 0xff;
668 }
669 
670 static int b53_switch_reset(struct b53_device *dev)
671 {
672 	unsigned int timeout = 1000;
673 	u8 mgmt, reg;
674 
675 	b53_switch_reset_gpio(dev);
676 
677 	if (is539x(dev)) {
678 		b53_write8(dev, B53_CTRL_PAGE, B53_SOFTRESET, 0x83);
679 		b53_write8(dev, B53_CTRL_PAGE, B53_SOFTRESET, 0x00);
680 	}
681 
682 	/* This is specific to 58xx devices here, do not use is58xx() which
683 	 * covers the larger Starfigther 2 family, including 7445/7278 which
684 	 * still use this driver as a library and need to perform the reset
685 	 * earlier.
686 	 */
687 	if (dev->chip_id == BCM58XX_DEVICE_ID) {
688 		b53_read8(dev, B53_CTRL_PAGE, B53_SOFTRESET, &reg);
689 		reg |= SW_RST | EN_SW_RST | EN_CH_RST;
690 		b53_write8(dev, B53_CTRL_PAGE, B53_SOFTRESET, reg);
691 
692 		do {
693 			b53_read8(dev, B53_CTRL_PAGE, B53_SOFTRESET, &reg);
694 			if (!(reg & SW_RST))
695 				break;
696 
697 			usleep_range(1000, 2000);
698 		} while (timeout-- > 0);
699 
700 		if (timeout == 0)
701 			return -ETIMEDOUT;
702 	}
703 
704 	b53_read8(dev, B53_CTRL_PAGE, B53_SWITCH_MODE, &mgmt);
705 
706 	if (!(mgmt & SM_SW_FWD_EN)) {
707 		mgmt &= ~SM_SW_FWD_MODE;
708 		mgmt |= SM_SW_FWD_EN;
709 
710 		b53_write8(dev, B53_CTRL_PAGE, B53_SWITCH_MODE, mgmt);
711 		b53_read8(dev, B53_CTRL_PAGE, B53_SWITCH_MODE, &mgmt);
712 
713 		if (!(mgmt & SM_SW_FWD_EN)) {
714 			dev_err(dev->dev, "Failed to enable switch!\n");
715 			return -EINVAL;
716 		}
717 	}
718 
719 	b53_enable_mib(dev);
720 
721 	return b53_flush_arl(dev, FAST_AGE_STATIC);
722 }
723 
724 static int b53_phy_read16(struct dsa_switch *ds, int addr, int reg)
725 {
726 	struct b53_device *priv = ds->priv;
727 	u16 value = 0;
728 	int ret;
729 
730 	if (priv->ops->phy_read16)
731 		ret = priv->ops->phy_read16(priv, addr, reg, &value);
732 	else
733 		ret = b53_read16(priv, B53_PORT_MII_PAGE(addr),
734 				 reg * 2, &value);
735 
736 	return ret ? ret : value;
737 }
738 
739 static int b53_phy_write16(struct dsa_switch *ds, int addr, int reg, u16 val)
740 {
741 	struct b53_device *priv = ds->priv;
742 
743 	if (priv->ops->phy_write16)
744 		return priv->ops->phy_write16(priv, addr, reg, val);
745 
746 	return b53_write16(priv, B53_PORT_MII_PAGE(addr), reg * 2, val);
747 }
748 
749 static int b53_reset_switch(struct b53_device *priv)
750 {
751 	/* reset vlans */
752 	priv->enable_jumbo = false;
753 
754 	memset(priv->vlans, 0, sizeof(*priv->vlans) * priv->num_vlans);
755 	memset(priv->ports, 0, sizeof(*priv->ports) * priv->num_ports);
756 
757 	return b53_switch_reset(priv);
758 }
759 
760 static int b53_apply_config(struct b53_device *priv)
761 {
762 	/* disable switching */
763 	b53_set_forwarding(priv, 0);
764 
765 	b53_configure_vlan(priv->ds);
766 
767 	/* enable switching */
768 	b53_set_forwarding(priv, 1);
769 
770 	return 0;
771 }
772 
773 static void b53_reset_mib(struct b53_device *priv)
774 {
775 	u8 gc;
776 
777 	b53_read8(priv, B53_MGMT_PAGE, B53_GLOBAL_CONFIG, &gc);
778 
779 	b53_write8(priv, B53_MGMT_PAGE, B53_GLOBAL_CONFIG, gc | GC_RESET_MIB);
780 	msleep(1);
781 	b53_write8(priv, B53_MGMT_PAGE, B53_GLOBAL_CONFIG, gc & ~GC_RESET_MIB);
782 	msleep(1);
783 }
784 
785 static const struct b53_mib_desc *b53_get_mib(struct b53_device *dev)
786 {
787 	if (is5365(dev))
788 		return b53_mibs_65;
789 	else if (is63xx(dev))
790 		return b53_mibs_63xx;
791 	else if (is58xx(dev))
792 		return b53_mibs_58xx;
793 	else
794 		return b53_mibs;
795 }
796 
797 static unsigned int b53_get_mib_size(struct b53_device *dev)
798 {
799 	if (is5365(dev))
800 		return B53_MIBS_65_SIZE;
801 	else if (is63xx(dev))
802 		return B53_MIBS_63XX_SIZE;
803 	else if (is58xx(dev))
804 		return B53_MIBS_58XX_SIZE;
805 	else
806 		return B53_MIBS_SIZE;
807 }
808 
809 void b53_get_strings(struct dsa_switch *ds, int port, uint8_t *data)
810 {
811 	struct b53_device *dev = ds->priv;
812 	const struct b53_mib_desc *mibs = b53_get_mib(dev);
813 	unsigned int mib_size = b53_get_mib_size(dev);
814 	unsigned int i;
815 
816 	for (i = 0; i < mib_size; i++)
817 		memcpy(data + i * ETH_GSTRING_LEN,
818 		       mibs[i].name, ETH_GSTRING_LEN);
819 }
820 EXPORT_SYMBOL(b53_get_strings);
821 
822 void b53_get_ethtool_stats(struct dsa_switch *ds, int port, uint64_t *data)
823 {
824 	struct b53_device *dev = ds->priv;
825 	const struct b53_mib_desc *mibs = b53_get_mib(dev);
826 	unsigned int mib_size = b53_get_mib_size(dev);
827 	const struct b53_mib_desc *s;
828 	unsigned int i;
829 	u64 val = 0;
830 
831 	if (is5365(dev) && port == 5)
832 		port = 8;
833 
834 	mutex_lock(&dev->stats_mutex);
835 
836 	for (i = 0; i < mib_size; i++) {
837 		s = &mibs[i];
838 
839 		if (s->size == 8) {
840 			b53_read64(dev, B53_MIB_PAGE(port), s->offset, &val);
841 		} else {
842 			u32 val32;
843 
844 			b53_read32(dev, B53_MIB_PAGE(port), s->offset,
845 				   &val32);
846 			val = val32;
847 		}
848 		data[i] = (u64)val;
849 	}
850 
851 	mutex_unlock(&dev->stats_mutex);
852 }
853 EXPORT_SYMBOL(b53_get_ethtool_stats);
854 
855 int b53_get_sset_count(struct dsa_switch *ds)
856 {
857 	struct b53_device *dev = ds->priv;
858 
859 	return b53_get_mib_size(dev);
860 }
861 EXPORT_SYMBOL(b53_get_sset_count);
862 
863 static int b53_setup(struct dsa_switch *ds)
864 {
865 	struct b53_device *dev = ds->priv;
866 	unsigned int port;
867 	int ret;
868 
869 	ret = b53_reset_switch(dev);
870 	if (ret) {
871 		dev_err(ds->dev, "failed to reset switch\n");
872 		return ret;
873 	}
874 
875 	b53_reset_mib(dev);
876 
877 	ret = b53_apply_config(dev);
878 	if (ret)
879 		dev_err(ds->dev, "failed to apply configuration\n");
880 
881 	/* Configure IMP/CPU port, disable unused ports. Enabled
882 	 * ports will be configured with .port_enable
883 	 */
884 	for (port = 0; port < dev->num_ports; port++) {
885 		if (dsa_is_cpu_port(ds, port))
886 			b53_enable_cpu_port(dev, port);
887 		else if (dsa_is_unused_port(ds, port))
888 			b53_disable_port(ds, port, NULL);
889 	}
890 
891 	return ret;
892 }
893 
894 static void b53_adjust_link(struct dsa_switch *ds, int port,
895 			    struct phy_device *phydev)
896 {
897 	struct b53_device *dev = ds->priv;
898 	struct ethtool_eee *p = &dev->ports[port].eee;
899 	u8 rgmii_ctrl = 0, reg = 0, off;
900 
901 	if (!phy_is_pseudo_fixed_link(phydev))
902 		return;
903 
904 	/* Override the port settings */
905 	if (port == dev->cpu_port) {
906 		off = B53_PORT_OVERRIDE_CTRL;
907 		reg = PORT_OVERRIDE_EN;
908 	} else {
909 		off = B53_GMII_PORT_OVERRIDE_CTRL(port);
910 		reg = GMII_PO_EN;
911 	}
912 
913 	/* Set the link UP */
914 	if (phydev->link)
915 		reg |= PORT_OVERRIDE_LINK;
916 
917 	if (phydev->duplex == DUPLEX_FULL)
918 		reg |= PORT_OVERRIDE_FULL_DUPLEX;
919 
920 	switch (phydev->speed) {
921 	case 2000:
922 		reg |= PORT_OVERRIDE_SPEED_2000M;
923 		/* fallthrough */
924 	case SPEED_1000:
925 		reg |= PORT_OVERRIDE_SPEED_1000M;
926 		break;
927 	case SPEED_100:
928 		reg |= PORT_OVERRIDE_SPEED_100M;
929 		break;
930 	case SPEED_10:
931 		reg |= PORT_OVERRIDE_SPEED_10M;
932 		break;
933 	default:
934 		dev_err(ds->dev, "unknown speed: %d\n", phydev->speed);
935 		return;
936 	}
937 
938 	/* Enable flow control on BCM5301x's CPU port */
939 	if (is5301x(dev) && port == dev->cpu_port)
940 		reg |= PORT_OVERRIDE_RX_FLOW | PORT_OVERRIDE_TX_FLOW;
941 
942 	if (phydev->pause) {
943 		if (phydev->asym_pause)
944 			reg |= PORT_OVERRIDE_TX_FLOW;
945 		reg |= PORT_OVERRIDE_RX_FLOW;
946 	}
947 
948 	b53_write8(dev, B53_CTRL_PAGE, off, reg);
949 
950 	if (is531x5(dev) && phy_interface_is_rgmii(phydev)) {
951 		if (port == 8)
952 			off = B53_RGMII_CTRL_IMP;
953 		else
954 			off = B53_RGMII_CTRL_P(port);
955 
956 		/* Configure the port RGMII clock delay by DLL disabled and
957 		 * tx_clk aligned timing (restoring to reset defaults)
958 		 */
959 		b53_read8(dev, B53_CTRL_PAGE, off, &rgmii_ctrl);
960 		rgmii_ctrl &= ~(RGMII_CTRL_DLL_RXC | RGMII_CTRL_DLL_TXC |
961 				RGMII_CTRL_TIMING_SEL);
962 
963 		/* PHY_INTERFACE_MODE_RGMII_TXID means TX internal delay, make
964 		 * sure that we enable the port TX clock internal delay to
965 		 * account for this internal delay that is inserted, otherwise
966 		 * the switch won't be able to receive correctly.
967 		 *
968 		 * PHY_INTERFACE_MODE_RGMII means that we are not introducing
969 		 * any delay neither on transmission nor reception, so the
970 		 * BCM53125 must also be configured accordingly to account for
971 		 * the lack of delay and introduce
972 		 *
973 		 * The BCM53125 switch has its RX clock and TX clock control
974 		 * swapped, hence the reason why we modify the TX clock path in
975 		 * the "RGMII" case
976 		 */
977 		if (phydev->interface == PHY_INTERFACE_MODE_RGMII_TXID)
978 			rgmii_ctrl |= RGMII_CTRL_DLL_TXC;
979 		if (phydev->interface == PHY_INTERFACE_MODE_RGMII)
980 			rgmii_ctrl |= RGMII_CTRL_DLL_TXC | RGMII_CTRL_DLL_RXC;
981 		rgmii_ctrl |= RGMII_CTRL_TIMING_SEL;
982 		b53_write8(dev, B53_CTRL_PAGE, off, rgmii_ctrl);
983 
984 		dev_info(ds->dev, "Configured port %d for %s\n", port,
985 			 phy_modes(phydev->interface));
986 	}
987 
988 	/* configure MII port if necessary */
989 	if (is5325(dev)) {
990 		b53_read8(dev, B53_CTRL_PAGE, B53_PORT_OVERRIDE_CTRL,
991 			  &reg);
992 
993 		/* reverse mii needs to be enabled */
994 		if (!(reg & PORT_OVERRIDE_RV_MII_25)) {
995 			b53_write8(dev, B53_CTRL_PAGE, B53_PORT_OVERRIDE_CTRL,
996 				   reg | PORT_OVERRIDE_RV_MII_25);
997 			b53_read8(dev, B53_CTRL_PAGE, B53_PORT_OVERRIDE_CTRL,
998 				  &reg);
999 
1000 			if (!(reg & PORT_OVERRIDE_RV_MII_25)) {
1001 				dev_err(ds->dev,
1002 					"Failed to enable reverse MII mode\n");
1003 				return;
1004 			}
1005 		}
1006 	} else if (is5301x(dev)) {
1007 		if (port != dev->cpu_port) {
1008 			u8 po_reg = B53_GMII_PORT_OVERRIDE_CTRL(dev->cpu_port);
1009 			u8 gmii_po;
1010 
1011 			b53_read8(dev, B53_CTRL_PAGE, po_reg, &gmii_po);
1012 			gmii_po |= GMII_PO_LINK |
1013 				   GMII_PO_RX_FLOW |
1014 				   GMII_PO_TX_FLOW |
1015 				   GMII_PO_EN |
1016 				   GMII_PO_SPEED_2000M;
1017 			b53_write8(dev, B53_CTRL_PAGE, po_reg, gmii_po);
1018 		}
1019 	}
1020 
1021 	/* Re-negotiate EEE if it was enabled already */
1022 	p->eee_enabled = b53_eee_init(ds, port, phydev);
1023 }
1024 
1025 int b53_vlan_filtering(struct dsa_switch *ds, int port, bool vlan_filtering)
1026 {
1027 	return 0;
1028 }
1029 EXPORT_SYMBOL(b53_vlan_filtering);
1030 
1031 int b53_vlan_prepare(struct dsa_switch *ds, int port,
1032 		     const struct switchdev_obj_port_vlan *vlan,
1033 		     struct switchdev_trans *trans)
1034 {
1035 	struct b53_device *dev = ds->priv;
1036 
1037 	if ((is5325(dev) || is5365(dev)) && vlan->vid_begin == 0)
1038 		return -EOPNOTSUPP;
1039 
1040 	if (vlan->vid_end > dev->num_vlans)
1041 		return -ERANGE;
1042 
1043 	b53_enable_vlan(dev, true);
1044 
1045 	return 0;
1046 }
1047 EXPORT_SYMBOL(b53_vlan_prepare);
1048 
1049 void b53_vlan_add(struct dsa_switch *ds, int port,
1050 		  const struct switchdev_obj_port_vlan *vlan,
1051 		  struct switchdev_trans *trans)
1052 {
1053 	struct b53_device *dev = ds->priv;
1054 	bool untagged = vlan->flags & BRIDGE_VLAN_INFO_UNTAGGED;
1055 	bool pvid = vlan->flags & BRIDGE_VLAN_INFO_PVID;
1056 	struct b53_vlan *vl;
1057 	u16 vid;
1058 
1059 	for (vid = vlan->vid_begin; vid <= vlan->vid_end; ++vid) {
1060 		vl = &dev->vlans[vid];
1061 
1062 		b53_get_vlan_entry(dev, vid, vl);
1063 
1064 		vl->members |= BIT(port);
1065 		if (untagged)
1066 			vl->untag |= BIT(port);
1067 		else
1068 			vl->untag &= ~BIT(port);
1069 
1070 		b53_set_vlan_entry(dev, vid, vl);
1071 		b53_fast_age_vlan(dev, vid);
1072 	}
1073 
1074 	if (pvid) {
1075 		b53_write16(dev, B53_VLAN_PAGE, B53_VLAN_PORT_DEF_TAG(port),
1076 			    vlan->vid_end);
1077 		b53_fast_age_vlan(dev, vid);
1078 	}
1079 }
1080 EXPORT_SYMBOL(b53_vlan_add);
1081 
1082 int b53_vlan_del(struct dsa_switch *ds, int port,
1083 		 const struct switchdev_obj_port_vlan *vlan)
1084 {
1085 	struct b53_device *dev = ds->priv;
1086 	bool untagged = vlan->flags & BRIDGE_VLAN_INFO_UNTAGGED;
1087 	struct b53_vlan *vl;
1088 	u16 vid;
1089 	u16 pvid;
1090 
1091 	b53_read16(dev, B53_VLAN_PAGE, B53_VLAN_PORT_DEF_TAG(port), &pvid);
1092 
1093 	for (vid = vlan->vid_begin; vid <= vlan->vid_end; ++vid) {
1094 		vl = &dev->vlans[vid];
1095 
1096 		b53_get_vlan_entry(dev, vid, vl);
1097 
1098 		vl->members &= ~BIT(port);
1099 
1100 		if (pvid == vid) {
1101 			if (is5325(dev) || is5365(dev))
1102 				pvid = 1;
1103 			else
1104 				pvid = 0;
1105 		}
1106 
1107 		if (untagged)
1108 			vl->untag &= ~(BIT(port));
1109 
1110 		b53_set_vlan_entry(dev, vid, vl);
1111 		b53_fast_age_vlan(dev, vid);
1112 	}
1113 
1114 	b53_write16(dev, B53_VLAN_PAGE, B53_VLAN_PORT_DEF_TAG(port), pvid);
1115 	b53_fast_age_vlan(dev, pvid);
1116 
1117 	return 0;
1118 }
1119 EXPORT_SYMBOL(b53_vlan_del);
1120 
1121 /* Address Resolution Logic routines */
1122 static int b53_arl_op_wait(struct b53_device *dev)
1123 {
1124 	unsigned int timeout = 10;
1125 	u8 reg;
1126 
1127 	do {
1128 		b53_read8(dev, B53_ARLIO_PAGE, B53_ARLTBL_RW_CTRL, &reg);
1129 		if (!(reg & ARLTBL_START_DONE))
1130 			return 0;
1131 
1132 		usleep_range(1000, 2000);
1133 	} while (timeout--);
1134 
1135 	dev_warn(dev->dev, "timeout waiting for ARL to finish: 0x%02x\n", reg);
1136 
1137 	return -ETIMEDOUT;
1138 }
1139 
1140 static int b53_arl_rw_op(struct b53_device *dev, unsigned int op)
1141 {
1142 	u8 reg;
1143 
1144 	if (op > ARLTBL_RW)
1145 		return -EINVAL;
1146 
1147 	b53_read8(dev, B53_ARLIO_PAGE, B53_ARLTBL_RW_CTRL, &reg);
1148 	reg |= ARLTBL_START_DONE;
1149 	if (op)
1150 		reg |= ARLTBL_RW;
1151 	else
1152 		reg &= ~ARLTBL_RW;
1153 	b53_write8(dev, B53_ARLIO_PAGE, B53_ARLTBL_RW_CTRL, reg);
1154 
1155 	return b53_arl_op_wait(dev);
1156 }
1157 
1158 static int b53_arl_read(struct b53_device *dev, u64 mac,
1159 			u16 vid, struct b53_arl_entry *ent, u8 *idx,
1160 			bool is_valid)
1161 {
1162 	unsigned int i;
1163 	int ret;
1164 
1165 	ret = b53_arl_op_wait(dev);
1166 	if (ret)
1167 		return ret;
1168 
1169 	/* Read the bins */
1170 	for (i = 0; i < dev->num_arl_entries; i++) {
1171 		u64 mac_vid;
1172 		u32 fwd_entry;
1173 
1174 		b53_read64(dev, B53_ARLIO_PAGE,
1175 			   B53_ARLTBL_MAC_VID_ENTRY(i), &mac_vid);
1176 		b53_read32(dev, B53_ARLIO_PAGE,
1177 			   B53_ARLTBL_DATA_ENTRY(i), &fwd_entry);
1178 		b53_arl_to_entry(ent, mac_vid, fwd_entry);
1179 
1180 		if (!(fwd_entry & ARLTBL_VALID))
1181 			continue;
1182 		if ((mac_vid & ARLTBL_MAC_MASK) != mac)
1183 			continue;
1184 		*idx = i;
1185 	}
1186 
1187 	return -ENOENT;
1188 }
1189 
1190 static int b53_arl_op(struct b53_device *dev, int op, int port,
1191 		      const unsigned char *addr, u16 vid, bool is_valid)
1192 {
1193 	struct b53_arl_entry ent;
1194 	u32 fwd_entry;
1195 	u64 mac, mac_vid = 0;
1196 	u8 idx = 0;
1197 	int ret;
1198 
1199 	/* Convert the array into a 64-bit MAC */
1200 	mac = ether_addr_to_u64(addr);
1201 
1202 	/* Perform a read for the given MAC and VID */
1203 	b53_write48(dev, B53_ARLIO_PAGE, B53_MAC_ADDR_IDX, mac);
1204 	b53_write16(dev, B53_ARLIO_PAGE, B53_VLAN_ID_IDX, vid);
1205 
1206 	/* Issue a read operation for this MAC */
1207 	ret = b53_arl_rw_op(dev, 1);
1208 	if (ret)
1209 		return ret;
1210 
1211 	ret = b53_arl_read(dev, mac, vid, &ent, &idx, is_valid);
1212 	/* If this is a read, just finish now */
1213 	if (op)
1214 		return ret;
1215 
1216 	/* We could not find a matching MAC, so reset to a new entry */
1217 	if (ret) {
1218 		fwd_entry = 0;
1219 		idx = 1;
1220 	}
1221 
1222 	memset(&ent, 0, sizeof(ent));
1223 	ent.port = port;
1224 	ent.is_valid = is_valid;
1225 	ent.vid = vid;
1226 	ent.is_static = true;
1227 	memcpy(ent.mac, addr, ETH_ALEN);
1228 	b53_arl_from_entry(&mac_vid, &fwd_entry, &ent);
1229 
1230 	b53_write64(dev, B53_ARLIO_PAGE,
1231 		    B53_ARLTBL_MAC_VID_ENTRY(idx), mac_vid);
1232 	b53_write32(dev, B53_ARLIO_PAGE,
1233 		    B53_ARLTBL_DATA_ENTRY(idx), fwd_entry);
1234 
1235 	return b53_arl_rw_op(dev, 0);
1236 }
1237 
1238 int b53_fdb_add(struct dsa_switch *ds, int port,
1239 		const unsigned char *addr, u16 vid)
1240 {
1241 	struct b53_device *priv = ds->priv;
1242 
1243 	/* 5325 and 5365 require some more massaging, but could
1244 	 * be supported eventually
1245 	 */
1246 	if (is5325(priv) || is5365(priv))
1247 		return -EOPNOTSUPP;
1248 
1249 	return b53_arl_op(priv, 0, port, addr, vid, true);
1250 }
1251 EXPORT_SYMBOL(b53_fdb_add);
1252 
1253 int b53_fdb_del(struct dsa_switch *ds, int port,
1254 		const unsigned char *addr, u16 vid)
1255 {
1256 	struct b53_device *priv = ds->priv;
1257 
1258 	return b53_arl_op(priv, 0, port, addr, vid, false);
1259 }
1260 EXPORT_SYMBOL(b53_fdb_del);
1261 
1262 static int b53_arl_search_wait(struct b53_device *dev)
1263 {
1264 	unsigned int timeout = 1000;
1265 	u8 reg;
1266 
1267 	do {
1268 		b53_read8(dev, B53_ARLIO_PAGE, B53_ARL_SRCH_CTL, &reg);
1269 		if (!(reg & ARL_SRCH_STDN))
1270 			return 0;
1271 
1272 		if (reg & ARL_SRCH_VLID)
1273 			return 0;
1274 
1275 		usleep_range(1000, 2000);
1276 	} while (timeout--);
1277 
1278 	return -ETIMEDOUT;
1279 }
1280 
1281 static void b53_arl_search_rd(struct b53_device *dev, u8 idx,
1282 			      struct b53_arl_entry *ent)
1283 {
1284 	u64 mac_vid;
1285 	u32 fwd_entry;
1286 
1287 	b53_read64(dev, B53_ARLIO_PAGE,
1288 		   B53_ARL_SRCH_RSTL_MACVID(idx), &mac_vid);
1289 	b53_read32(dev, B53_ARLIO_PAGE,
1290 		   B53_ARL_SRCH_RSTL(idx), &fwd_entry);
1291 	b53_arl_to_entry(ent, mac_vid, fwd_entry);
1292 }
1293 
1294 static int b53_fdb_copy(int port, const struct b53_arl_entry *ent,
1295 			dsa_fdb_dump_cb_t *cb, void *data)
1296 {
1297 	if (!ent->is_valid)
1298 		return 0;
1299 
1300 	if (port != ent->port)
1301 		return 0;
1302 
1303 	return cb(ent->mac, ent->vid, ent->is_static, data);
1304 }
1305 
1306 int b53_fdb_dump(struct dsa_switch *ds, int port,
1307 		 dsa_fdb_dump_cb_t *cb, void *data)
1308 {
1309 	struct b53_device *priv = ds->priv;
1310 	struct b53_arl_entry results[2];
1311 	unsigned int count = 0;
1312 	int ret;
1313 	u8 reg;
1314 
1315 	/* Start search operation */
1316 	reg = ARL_SRCH_STDN;
1317 	b53_write8(priv, B53_ARLIO_PAGE, B53_ARL_SRCH_CTL, reg);
1318 
1319 	do {
1320 		ret = b53_arl_search_wait(priv);
1321 		if (ret)
1322 			return ret;
1323 
1324 		b53_arl_search_rd(priv, 0, &results[0]);
1325 		ret = b53_fdb_copy(port, &results[0], cb, data);
1326 		if (ret)
1327 			return ret;
1328 
1329 		if (priv->num_arl_entries > 2) {
1330 			b53_arl_search_rd(priv, 1, &results[1]);
1331 			ret = b53_fdb_copy(port, &results[1], cb, data);
1332 			if (ret)
1333 				return ret;
1334 
1335 			if (!results[0].is_valid && !results[1].is_valid)
1336 				break;
1337 		}
1338 
1339 	} while (count++ < 1024);
1340 
1341 	return 0;
1342 }
1343 EXPORT_SYMBOL(b53_fdb_dump);
1344 
1345 int b53_br_join(struct dsa_switch *ds, int port, struct net_device *br)
1346 {
1347 	struct b53_device *dev = ds->priv;
1348 	s8 cpu_port = ds->ports[port].cpu_dp->index;
1349 	u16 pvlan, reg;
1350 	unsigned int i;
1351 
1352 	/* Make this port leave the all VLANs join since we will have proper
1353 	 * VLAN entries from now on
1354 	 */
1355 	if (is58xx(dev)) {
1356 		b53_read16(dev, B53_VLAN_PAGE, B53_JOIN_ALL_VLAN_EN, &reg);
1357 		reg &= ~BIT(port);
1358 		if ((reg & BIT(cpu_port)) == BIT(cpu_port))
1359 			reg &= ~BIT(cpu_port);
1360 		b53_write16(dev, B53_VLAN_PAGE, B53_JOIN_ALL_VLAN_EN, reg);
1361 	}
1362 
1363 	b53_read16(dev, B53_PVLAN_PAGE, B53_PVLAN_PORT_MASK(port), &pvlan);
1364 
1365 	b53_for_each_port(dev, i) {
1366 		if (dsa_to_port(ds, i)->bridge_dev != br)
1367 			continue;
1368 
1369 		/* Add this local port to the remote port VLAN control
1370 		 * membership and update the remote port bitmask
1371 		 */
1372 		b53_read16(dev, B53_PVLAN_PAGE, B53_PVLAN_PORT_MASK(i), &reg);
1373 		reg |= BIT(port);
1374 		b53_write16(dev, B53_PVLAN_PAGE, B53_PVLAN_PORT_MASK(i), reg);
1375 		dev->ports[i].vlan_ctl_mask = reg;
1376 
1377 		pvlan |= BIT(i);
1378 	}
1379 
1380 	/* Configure the local port VLAN control membership to include
1381 	 * remote ports and update the local port bitmask
1382 	 */
1383 	b53_write16(dev, B53_PVLAN_PAGE, B53_PVLAN_PORT_MASK(port), pvlan);
1384 	dev->ports[port].vlan_ctl_mask = pvlan;
1385 
1386 	return 0;
1387 }
1388 EXPORT_SYMBOL(b53_br_join);
1389 
1390 void b53_br_leave(struct dsa_switch *ds, int port, struct net_device *br)
1391 {
1392 	struct b53_device *dev = ds->priv;
1393 	struct b53_vlan *vl = &dev->vlans[0];
1394 	s8 cpu_port = ds->ports[port].cpu_dp->index;
1395 	unsigned int i;
1396 	u16 pvlan, reg, pvid;
1397 
1398 	b53_read16(dev, B53_PVLAN_PAGE, B53_PVLAN_PORT_MASK(port), &pvlan);
1399 
1400 	b53_for_each_port(dev, i) {
1401 		/* Don't touch the remaining ports */
1402 		if (dsa_to_port(ds, i)->bridge_dev != br)
1403 			continue;
1404 
1405 		b53_read16(dev, B53_PVLAN_PAGE, B53_PVLAN_PORT_MASK(i), &reg);
1406 		reg &= ~BIT(port);
1407 		b53_write16(dev, B53_PVLAN_PAGE, B53_PVLAN_PORT_MASK(i), reg);
1408 		dev->ports[port].vlan_ctl_mask = reg;
1409 
1410 		/* Prevent self removal to preserve isolation */
1411 		if (port != i)
1412 			pvlan &= ~BIT(i);
1413 	}
1414 
1415 	b53_write16(dev, B53_PVLAN_PAGE, B53_PVLAN_PORT_MASK(port), pvlan);
1416 	dev->ports[port].vlan_ctl_mask = pvlan;
1417 
1418 	if (is5325(dev) || is5365(dev))
1419 		pvid = 1;
1420 	else
1421 		pvid = 0;
1422 
1423 	/* Make this port join all VLANs without VLAN entries */
1424 	if (is58xx(dev)) {
1425 		b53_read16(dev, B53_VLAN_PAGE, B53_JOIN_ALL_VLAN_EN, &reg);
1426 		reg |= BIT(port);
1427 		if (!(reg & BIT(cpu_port)))
1428 			reg |= BIT(cpu_port);
1429 		b53_write16(dev, B53_VLAN_PAGE, B53_JOIN_ALL_VLAN_EN, reg);
1430 	} else {
1431 		b53_get_vlan_entry(dev, pvid, vl);
1432 		vl->members |= BIT(port) | BIT(cpu_port);
1433 		vl->untag |= BIT(port) | BIT(cpu_port);
1434 		b53_set_vlan_entry(dev, pvid, vl);
1435 	}
1436 }
1437 EXPORT_SYMBOL(b53_br_leave);
1438 
1439 void b53_br_set_stp_state(struct dsa_switch *ds, int port, u8 state)
1440 {
1441 	struct b53_device *dev = ds->priv;
1442 	u8 hw_state;
1443 	u8 reg;
1444 
1445 	switch (state) {
1446 	case BR_STATE_DISABLED:
1447 		hw_state = PORT_CTRL_DIS_STATE;
1448 		break;
1449 	case BR_STATE_LISTENING:
1450 		hw_state = PORT_CTRL_LISTEN_STATE;
1451 		break;
1452 	case BR_STATE_LEARNING:
1453 		hw_state = PORT_CTRL_LEARN_STATE;
1454 		break;
1455 	case BR_STATE_FORWARDING:
1456 		hw_state = PORT_CTRL_FWD_STATE;
1457 		break;
1458 	case BR_STATE_BLOCKING:
1459 		hw_state = PORT_CTRL_BLOCK_STATE;
1460 		break;
1461 	default:
1462 		dev_err(ds->dev, "invalid STP state: %d\n", state);
1463 		return;
1464 	}
1465 
1466 	b53_read8(dev, B53_CTRL_PAGE, B53_PORT_CTRL(port), &reg);
1467 	reg &= ~PORT_CTRL_STP_STATE_MASK;
1468 	reg |= hw_state;
1469 	b53_write8(dev, B53_CTRL_PAGE, B53_PORT_CTRL(port), reg);
1470 }
1471 EXPORT_SYMBOL(b53_br_set_stp_state);
1472 
1473 void b53_br_fast_age(struct dsa_switch *ds, int port)
1474 {
1475 	struct b53_device *dev = ds->priv;
1476 
1477 	if (b53_fast_age_port(dev, port))
1478 		dev_err(ds->dev, "fast ageing failed\n");
1479 }
1480 EXPORT_SYMBOL(b53_br_fast_age);
1481 
1482 static bool b53_can_enable_brcm_tags(struct dsa_switch *ds, int port)
1483 {
1484 	/* Broadcom switches will accept enabling Broadcom tags on the
1485 	 * following ports: 5, 7 and 8, any other port is not supported
1486 	 */
1487 	switch (port) {
1488 	case B53_CPU_PORT_25:
1489 	case 7:
1490 	case B53_CPU_PORT:
1491 		return true;
1492 	}
1493 
1494 	dev_warn(ds->dev, "Port %d is not Broadcom tag capable\n", port);
1495 	return false;
1496 }
1497 
1498 static enum dsa_tag_protocol b53_get_tag_protocol(struct dsa_switch *ds,
1499 						  int port)
1500 {
1501 	struct b53_device *dev = ds->priv;
1502 
1503 	/* Older models support a different tag format that we do not
1504 	 * support in net/dsa/tag_brcm.c yet.
1505 	 */
1506 	if (is5325(dev) || is5365(dev) || !b53_can_enable_brcm_tags(ds, port))
1507 		return DSA_TAG_PROTO_NONE;
1508 
1509 	/* Broadcom BCM58xx chips have a flow accelerator on Port 8
1510 	 * which requires us to use the prepended Broadcom tag type
1511 	 */
1512 	if (dev->chip_id == BCM58XX_DEVICE_ID && port == B53_CPU_PORT)
1513 		return DSA_TAG_PROTO_BRCM_PREPEND;
1514 
1515 	return DSA_TAG_PROTO_BRCM;
1516 }
1517 
1518 int b53_mirror_add(struct dsa_switch *ds, int port,
1519 		   struct dsa_mall_mirror_tc_entry *mirror, bool ingress)
1520 {
1521 	struct b53_device *dev = ds->priv;
1522 	u16 reg, loc;
1523 
1524 	if (ingress)
1525 		loc = B53_IG_MIR_CTL;
1526 	else
1527 		loc = B53_EG_MIR_CTL;
1528 
1529 	b53_read16(dev, B53_MGMT_PAGE, loc, &reg);
1530 	reg &= ~MIRROR_MASK;
1531 	reg |= BIT(port);
1532 	b53_write16(dev, B53_MGMT_PAGE, loc, reg);
1533 
1534 	b53_read16(dev, B53_MGMT_PAGE, B53_MIR_CAP_CTL, &reg);
1535 	reg &= ~CAP_PORT_MASK;
1536 	reg |= mirror->to_local_port;
1537 	reg |= MIRROR_EN;
1538 	b53_write16(dev, B53_MGMT_PAGE, B53_MIR_CAP_CTL, reg);
1539 
1540 	return 0;
1541 }
1542 EXPORT_SYMBOL(b53_mirror_add);
1543 
1544 void b53_mirror_del(struct dsa_switch *ds, int port,
1545 		    struct dsa_mall_mirror_tc_entry *mirror)
1546 {
1547 	struct b53_device *dev = ds->priv;
1548 	bool loc_disable = false, other_loc_disable = false;
1549 	u16 reg, loc;
1550 
1551 	if (mirror->ingress)
1552 		loc = B53_IG_MIR_CTL;
1553 	else
1554 		loc = B53_EG_MIR_CTL;
1555 
1556 	/* Update the desired ingress/egress register */
1557 	b53_read16(dev, B53_MGMT_PAGE, loc, &reg);
1558 	reg &= ~BIT(port);
1559 	if (!(reg & MIRROR_MASK))
1560 		loc_disable = true;
1561 	b53_write16(dev, B53_MGMT_PAGE, loc, reg);
1562 
1563 	/* Now look at the other one to know if we can disable mirroring
1564 	 * entirely
1565 	 */
1566 	if (mirror->ingress)
1567 		b53_read16(dev, B53_MGMT_PAGE, B53_EG_MIR_CTL, &reg);
1568 	else
1569 		b53_read16(dev, B53_MGMT_PAGE, B53_IG_MIR_CTL, &reg);
1570 	if (!(reg & MIRROR_MASK))
1571 		other_loc_disable = true;
1572 
1573 	b53_read16(dev, B53_MGMT_PAGE, B53_MIR_CAP_CTL, &reg);
1574 	/* Both no longer have ports, let's disable mirroring */
1575 	if (loc_disable && other_loc_disable) {
1576 		reg &= ~MIRROR_EN;
1577 		reg &= ~mirror->to_local_port;
1578 	}
1579 	b53_write16(dev, B53_MGMT_PAGE, B53_MIR_CAP_CTL, reg);
1580 }
1581 EXPORT_SYMBOL(b53_mirror_del);
1582 
1583 void b53_eee_enable_set(struct dsa_switch *ds, int port, bool enable)
1584 {
1585 	struct b53_device *dev = ds->priv;
1586 	u16 reg;
1587 
1588 	b53_read16(dev, B53_EEE_PAGE, B53_EEE_EN_CTRL, &reg);
1589 	if (enable)
1590 		reg |= BIT(port);
1591 	else
1592 		reg &= ~BIT(port);
1593 	b53_write16(dev, B53_EEE_PAGE, B53_EEE_EN_CTRL, reg);
1594 }
1595 EXPORT_SYMBOL(b53_eee_enable_set);
1596 
1597 
1598 /* Returns 0 if EEE was not enabled, or 1 otherwise
1599  */
1600 int b53_eee_init(struct dsa_switch *ds, int port, struct phy_device *phy)
1601 {
1602 	int ret;
1603 
1604 	ret = phy_init_eee(phy, 0);
1605 	if (ret)
1606 		return 0;
1607 
1608 	b53_eee_enable_set(ds, port, true);
1609 
1610 	return 1;
1611 }
1612 EXPORT_SYMBOL(b53_eee_init);
1613 
1614 int b53_get_mac_eee(struct dsa_switch *ds, int port, struct ethtool_eee *e)
1615 {
1616 	struct b53_device *dev = ds->priv;
1617 	struct ethtool_eee *p = &dev->ports[port].eee;
1618 	u16 reg;
1619 
1620 	if (is5325(dev) || is5365(dev))
1621 		return -EOPNOTSUPP;
1622 
1623 	b53_read16(dev, B53_EEE_PAGE, B53_EEE_LPI_INDICATE, &reg);
1624 	e->eee_enabled = p->eee_enabled;
1625 	e->eee_active = !!(reg & BIT(port));
1626 
1627 	return 0;
1628 }
1629 EXPORT_SYMBOL(b53_get_mac_eee);
1630 
1631 int b53_set_mac_eee(struct dsa_switch *ds, int port, struct ethtool_eee *e)
1632 {
1633 	struct b53_device *dev = ds->priv;
1634 	struct ethtool_eee *p = &dev->ports[port].eee;
1635 
1636 	if (is5325(dev) || is5365(dev))
1637 		return -EOPNOTSUPP;
1638 
1639 	p->eee_enabled = e->eee_enabled;
1640 	b53_eee_enable_set(ds, port, e->eee_enabled);
1641 
1642 	return 0;
1643 }
1644 EXPORT_SYMBOL(b53_set_mac_eee);
1645 
1646 static const struct dsa_switch_ops b53_switch_ops = {
1647 	.get_tag_protocol	= b53_get_tag_protocol,
1648 	.setup			= b53_setup,
1649 	.get_strings		= b53_get_strings,
1650 	.get_ethtool_stats	= b53_get_ethtool_stats,
1651 	.get_sset_count		= b53_get_sset_count,
1652 	.phy_read		= b53_phy_read16,
1653 	.phy_write		= b53_phy_write16,
1654 	.adjust_link		= b53_adjust_link,
1655 	.port_enable		= b53_enable_port,
1656 	.port_disable		= b53_disable_port,
1657 	.get_mac_eee		= b53_get_mac_eee,
1658 	.set_mac_eee		= b53_set_mac_eee,
1659 	.port_bridge_join	= b53_br_join,
1660 	.port_bridge_leave	= b53_br_leave,
1661 	.port_stp_state_set	= b53_br_set_stp_state,
1662 	.port_fast_age		= b53_br_fast_age,
1663 	.port_vlan_filtering	= b53_vlan_filtering,
1664 	.port_vlan_prepare	= b53_vlan_prepare,
1665 	.port_vlan_add		= b53_vlan_add,
1666 	.port_vlan_del		= b53_vlan_del,
1667 	.port_fdb_dump		= b53_fdb_dump,
1668 	.port_fdb_add		= b53_fdb_add,
1669 	.port_fdb_del		= b53_fdb_del,
1670 	.port_mirror_add	= b53_mirror_add,
1671 	.port_mirror_del	= b53_mirror_del,
1672 };
1673 
1674 struct b53_chip_data {
1675 	u32 chip_id;
1676 	const char *dev_name;
1677 	u16 vlans;
1678 	u16 enabled_ports;
1679 	u8 cpu_port;
1680 	u8 vta_regs[3];
1681 	u8 arl_entries;
1682 	u8 duplex_reg;
1683 	u8 jumbo_pm_reg;
1684 	u8 jumbo_size_reg;
1685 };
1686 
1687 #define B53_VTA_REGS	\
1688 	{ B53_VT_ACCESS, B53_VT_INDEX, B53_VT_ENTRY }
1689 #define B53_VTA_REGS_9798 \
1690 	{ B53_VT_ACCESS_9798, B53_VT_INDEX_9798, B53_VT_ENTRY_9798 }
1691 #define B53_VTA_REGS_63XX \
1692 	{ B53_VT_ACCESS_63XX, B53_VT_INDEX_63XX, B53_VT_ENTRY_63XX }
1693 
1694 static const struct b53_chip_data b53_switch_chips[] = {
1695 	{
1696 		.chip_id = BCM5325_DEVICE_ID,
1697 		.dev_name = "BCM5325",
1698 		.vlans = 16,
1699 		.enabled_ports = 0x1f,
1700 		.arl_entries = 2,
1701 		.cpu_port = B53_CPU_PORT_25,
1702 		.duplex_reg = B53_DUPLEX_STAT_FE,
1703 	},
1704 	{
1705 		.chip_id = BCM5365_DEVICE_ID,
1706 		.dev_name = "BCM5365",
1707 		.vlans = 256,
1708 		.enabled_ports = 0x1f,
1709 		.arl_entries = 2,
1710 		.cpu_port = B53_CPU_PORT_25,
1711 		.duplex_reg = B53_DUPLEX_STAT_FE,
1712 	},
1713 	{
1714 		.chip_id = BCM5395_DEVICE_ID,
1715 		.dev_name = "BCM5395",
1716 		.vlans = 4096,
1717 		.enabled_ports = 0x1f,
1718 		.arl_entries = 4,
1719 		.cpu_port = B53_CPU_PORT,
1720 		.vta_regs = B53_VTA_REGS,
1721 		.duplex_reg = B53_DUPLEX_STAT_GE,
1722 		.jumbo_pm_reg = B53_JUMBO_PORT_MASK,
1723 		.jumbo_size_reg = B53_JUMBO_MAX_SIZE,
1724 	},
1725 	{
1726 		.chip_id = BCM5397_DEVICE_ID,
1727 		.dev_name = "BCM5397",
1728 		.vlans = 4096,
1729 		.enabled_ports = 0x1f,
1730 		.arl_entries = 4,
1731 		.cpu_port = B53_CPU_PORT,
1732 		.vta_regs = B53_VTA_REGS_9798,
1733 		.duplex_reg = B53_DUPLEX_STAT_GE,
1734 		.jumbo_pm_reg = B53_JUMBO_PORT_MASK,
1735 		.jumbo_size_reg = B53_JUMBO_MAX_SIZE,
1736 	},
1737 	{
1738 		.chip_id = BCM5398_DEVICE_ID,
1739 		.dev_name = "BCM5398",
1740 		.vlans = 4096,
1741 		.enabled_ports = 0x7f,
1742 		.arl_entries = 4,
1743 		.cpu_port = B53_CPU_PORT,
1744 		.vta_regs = B53_VTA_REGS_9798,
1745 		.duplex_reg = B53_DUPLEX_STAT_GE,
1746 		.jumbo_pm_reg = B53_JUMBO_PORT_MASK,
1747 		.jumbo_size_reg = B53_JUMBO_MAX_SIZE,
1748 	},
1749 	{
1750 		.chip_id = BCM53115_DEVICE_ID,
1751 		.dev_name = "BCM53115",
1752 		.vlans = 4096,
1753 		.enabled_ports = 0x1f,
1754 		.arl_entries = 4,
1755 		.vta_regs = B53_VTA_REGS,
1756 		.cpu_port = B53_CPU_PORT,
1757 		.duplex_reg = B53_DUPLEX_STAT_GE,
1758 		.jumbo_pm_reg = B53_JUMBO_PORT_MASK,
1759 		.jumbo_size_reg = B53_JUMBO_MAX_SIZE,
1760 	},
1761 	{
1762 		.chip_id = BCM53125_DEVICE_ID,
1763 		.dev_name = "BCM53125",
1764 		.vlans = 4096,
1765 		.enabled_ports = 0xff,
1766 		.arl_entries = 4,
1767 		.cpu_port = B53_CPU_PORT,
1768 		.vta_regs = B53_VTA_REGS,
1769 		.duplex_reg = B53_DUPLEX_STAT_GE,
1770 		.jumbo_pm_reg = B53_JUMBO_PORT_MASK,
1771 		.jumbo_size_reg = B53_JUMBO_MAX_SIZE,
1772 	},
1773 	{
1774 		.chip_id = BCM53128_DEVICE_ID,
1775 		.dev_name = "BCM53128",
1776 		.vlans = 4096,
1777 		.enabled_ports = 0x1ff,
1778 		.arl_entries = 4,
1779 		.cpu_port = B53_CPU_PORT,
1780 		.vta_regs = B53_VTA_REGS,
1781 		.duplex_reg = B53_DUPLEX_STAT_GE,
1782 		.jumbo_pm_reg = B53_JUMBO_PORT_MASK,
1783 		.jumbo_size_reg = B53_JUMBO_MAX_SIZE,
1784 	},
1785 	{
1786 		.chip_id = BCM63XX_DEVICE_ID,
1787 		.dev_name = "BCM63xx",
1788 		.vlans = 4096,
1789 		.enabled_ports = 0, /* pdata must provide them */
1790 		.arl_entries = 4,
1791 		.cpu_port = B53_CPU_PORT,
1792 		.vta_regs = B53_VTA_REGS_63XX,
1793 		.duplex_reg = B53_DUPLEX_STAT_63XX,
1794 		.jumbo_pm_reg = B53_JUMBO_PORT_MASK_63XX,
1795 		.jumbo_size_reg = B53_JUMBO_MAX_SIZE_63XX,
1796 	},
1797 	{
1798 		.chip_id = BCM53010_DEVICE_ID,
1799 		.dev_name = "BCM53010",
1800 		.vlans = 4096,
1801 		.enabled_ports = 0x1f,
1802 		.arl_entries = 4,
1803 		.cpu_port = B53_CPU_PORT_25, /* TODO: auto detect */
1804 		.vta_regs = B53_VTA_REGS,
1805 		.duplex_reg = B53_DUPLEX_STAT_GE,
1806 		.jumbo_pm_reg = B53_JUMBO_PORT_MASK,
1807 		.jumbo_size_reg = B53_JUMBO_MAX_SIZE,
1808 	},
1809 	{
1810 		.chip_id = BCM53011_DEVICE_ID,
1811 		.dev_name = "BCM53011",
1812 		.vlans = 4096,
1813 		.enabled_ports = 0x1bf,
1814 		.arl_entries = 4,
1815 		.cpu_port = B53_CPU_PORT_25, /* TODO: auto detect */
1816 		.vta_regs = B53_VTA_REGS,
1817 		.duplex_reg = B53_DUPLEX_STAT_GE,
1818 		.jumbo_pm_reg = B53_JUMBO_PORT_MASK,
1819 		.jumbo_size_reg = B53_JUMBO_MAX_SIZE,
1820 	},
1821 	{
1822 		.chip_id = BCM53012_DEVICE_ID,
1823 		.dev_name = "BCM53012",
1824 		.vlans = 4096,
1825 		.enabled_ports = 0x1bf,
1826 		.arl_entries = 4,
1827 		.cpu_port = B53_CPU_PORT_25, /* TODO: auto detect */
1828 		.vta_regs = B53_VTA_REGS,
1829 		.duplex_reg = B53_DUPLEX_STAT_GE,
1830 		.jumbo_pm_reg = B53_JUMBO_PORT_MASK,
1831 		.jumbo_size_reg = B53_JUMBO_MAX_SIZE,
1832 	},
1833 	{
1834 		.chip_id = BCM53018_DEVICE_ID,
1835 		.dev_name = "BCM53018",
1836 		.vlans = 4096,
1837 		.enabled_ports = 0x1f,
1838 		.arl_entries = 4,
1839 		.cpu_port = B53_CPU_PORT_25, /* TODO: auto detect */
1840 		.vta_regs = B53_VTA_REGS,
1841 		.duplex_reg = B53_DUPLEX_STAT_GE,
1842 		.jumbo_pm_reg = B53_JUMBO_PORT_MASK,
1843 		.jumbo_size_reg = B53_JUMBO_MAX_SIZE,
1844 	},
1845 	{
1846 		.chip_id = BCM53019_DEVICE_ID,
1847 		.dev_name = "BCM53019",
1848 		.vlans = 4096,
1849 		.enabled_ports = 0x1f,
1850 		.arl_entries = 4,
1851 		.cpu_port = B53_CPU_PORT_25, /* TODO: auto detect */
1852 		.vta_regs = B53_VTA_REGS,
1853 		.duplex_reg = B53_DUPLEX_STAT_GE,
1854 		.jumbo_pm_reg = B53_JUMBO_PORT_MASK,
1855 		.jumbo_size_reg = B53_JUMBO_MAX_SIZE,
1856 	},
1857 	{
1858 		.chip_id = BCM58XX_DEVICE_ID,
1859 		.dev_name = "BCM585xx/586xx/88312",
1860 		.vlans	= 4096,
1861 		.enabled_ports = 0x1ff,
1862 		.arl_entries = 4,
1863 		.cpu_port = B53_CPU_PORT,
1864 		.vta_regs = B53_VTA_REGS,
1865 		.duplex_reg = B53_DUPLEX_STAT_GE,
1866 		.jumbo_pm_reg = B53_JUMBO_PORT_MASK,
1867 		.jumbo_size_reg = B53_JUMBO_MAX_SIZE,
1868 	},
1869 	{
1870 		.chip_id = BCM7445_DEVICE_ID,
1871 		.dev_name = "BCM7445",
1872 		.vlans	= 4096,
1873 		.enabled_ports = 0x1ff,
1874 		.arl_entries = 4,
1875 		.cpu_port = B53_CPU_PORT,
1876 		.vta_regs = B53_VTA_REGS,
1877 		.duplex_reg = B53_DUPLEX_STAT_GE,
1878 		.jumbo_pm_reg = B53_JUMBO_PORT_MASK,
1879 		.jumbo_size_reg = B53_JUMBO_MAX_SIZE,
1880 	},
1881 	{
1882 		.chip_id = BCM7278_DEVICE_ID,
1883 		.dev_name = "BCM7278",
1884 		.vlans = 4096,
1885 		.enabled_ports = 0x1ff,
1886 		.arl_entries= 4,
1887 		.cpu_port = B53_CPU_PORT,
1888 		.vta_regs = B53_VTA_REGS,
1889 		.duplex_reg = B53_DUPLEX_STAT_GE,
1890 		.jumbo_pm_reg = B53_JUMBO_PORT_MASK,
1891 		.jumbo_size_reg = B53_JUMBO_MAX_SIZE,
1892 	},
1893 };
1894 
1895 static int b53_switch_init(struct b53_device *dev)
1896 {
1897 	unsigned int i;
1898 	int ret;
1899 
1900 	for (i = 0; i < ARRAY_SIZE(b53_switch_chips); i++) {
1901 		const struct b53_chip_data *chip = &b53_switch_chips[i];
1902 
1903 		if (chip->chip_id == dev->chip_id) {
1904 			if (!dev->enabled_ports)
1905 				dev->enabled_ports = chip->enabled_ports;
1906 			dev->name = chip->dev_name;
1907 			dev->duplex_reg = chip->duplex_reg;
1908 			dev->vta_regs[0] = chip->vta_regs[0];
1909 			dev->vta_regs[1] = chip->vta_regs[1];
1910 			dev->vta_regs[2] = chip->vta_regs[2];
1911 			dev->jumbo_pm_reg = chip->jumbo_pm_reg;
1912 			dev->cpu_port = chip->cpu_port;
1913 			dev->num_vlans = chip->vlans;
1914 			dev->num_arl_entries = chip->arl_entries;
1915 			break;
1916 		}
1917 	}
1918 
1919 	/* check which BCM5325x version we have */
1920 	if (is5325(dev)) {
1921 		u8 vc4;
1922 
1923 		b53_read8(dev, B53_VLAN_PAGE, B53_VLAN_CTRL4_25, &vc4);
1924 
1925 		/* check reserved bits */
1926 		switch (vc4 & 3) {
1927 		case 1:
1928 			/* BCM5325E */
1929 			break;
1930 		case 3:
1931 			/* BCM5325F - do not use port 4 */
1932 			dev->enabled_ports &= ~BIT(4);
1933 			break;
1934 		default:
1935 /* On the BCM47XX SoCs this is the supported internal switch.*/
1936 #ifndef CONFIG_BCM47XX
1937 			/* BCM5325M */
1938 			return -EINVAL;
1939 #else
1940 			break;
1941 #endif
1942 		}
1943 	} else if (dev->chip_id == BCM53115_DEVICE_ID) {
1944 		u64 strap_value;
1945 
1946 		b53_read48(dev, B53_STAT_PAGE, B53_STRAP_VALUE, &strap_value);
1947 		/* use second IMP port if GMII is enabled */
1948 		if (strap_value & SV_GMII_CTRL_115)
1949 			dev->cpu_port = 5;
1950 	}
1951 
1952 	/* cpu port is always last */
1953 	dev->num_ports = dev->cpu_port + 1;
1954 	dev->enabled_ports |= BIT(dev->cpu_port);
1955 
1956 	dev->ports = devm_kzalloc(dev->dev,
1957 				  sizeof(struct b53_port) * dev->num_ports,
1958 				  GFP_KERNEL);
1959 	if (!dev->ports)
1960 		return -ENOMEM;
1961 
1962 	dev->vlans = devm_kzalloc(dev->dev,
1963 				  sizeof(struct b53_vlan) * dev->num_vlans,
1964 				  GFP_KERNEL);
1965 	if (!dev->vlans)
1966 		return -ENOMEM;
1967 
1968 	dev->reset_gpio = b53_switch_get_reset_gpio(dev);
1969 	if (dev->reset_gpio >= 0) {
1970 		ret = devm_gpio_request_one(dev->dev, dev->reset_gpio,
1971 					    GPIOF_OUT_INIT_HIGH, "robo_reset");
1972 		if (ret)
1973 			return ret;
1974 	}
1975 
1976 	return 0;
1977 }
1978 
1979 struct b53_device *b53_switch_alloc(struct device *base,
1980 				    const struct b53_io_ops *ops,
1981 				    void *priv)
1982 {
1983 	struct dsa_switch *ds;
1984 	struct b53_device *dev;
1985 
1986 	ds = dsa_switch_alloc(base, DSA_MAX_PORTS);
1987 	if (!ds)
1988 		return NULL;
1989 
1990 	dev = devm_kzalloc(base, sizeof(*dev), GFP_KERNEL);
1991 	if (!dev)
1992 		return NULL;
1993 
1994 	ds->priv = dev;
1995 	dev->dev = base;
1996 
1997 	dev->ds = ds;
1998 	dev->priv = priv;
1999 	dev->ops = ops;
2000 	ds->ops = &b53_switch_ops;
2001 	mutex_init(&dev->reg_mutex);
2002 	mutex_init(&dev->stats_mutex);
2003 
2004 	return dev;
2005 }
2006 EXPORT_SYMBOL(b53_switch_alloc);
2007 
2008 int b53_switch_detect(struct b53_device *dev)
2009 {
2010 	u32 id32;
2011 	u16 tmp;
2012 	u8 id8;
2013 	int ret;
2014 
2015 	ret = b53_read8(dev, B53_MGMT_PAGE, B53_DEVICE_ID, &id8);
2016 	if (ret)
2017 		return ret;
2018 
2019 	switch (id8) {
2020 	case 0:
2021 		/* BCM5325 and BCM5365 do not have this register so reads
2022 		 * return 0. But the read operation did succeed, so assume this
2023 		 * is one of them.
2024 		 *
2025 		 * Next check if we can write to the 5325's VTA register; for
2026 		 * 5365 it is read only.
2027 		 */
2028 		b53_write16(dev, B53_VLAN_PAGE, B53_VLAN_TABLE_ACCESS_25, 0xf);
2029 		b53_read16(dev, B53_VLAN_PAGE, B53_VLAN_TABLE_ACCESS_25, &tmp);
2030 
2031 		if (tmp == 0xf)
2032 			dev->chip_id = BCM5325_DEVICE_ID;
2033 		else
2034 			dev->chip_id = BCM5365_DEVICE_ID;
2035 		break;
2036 	case BCM5395_DEVICE_ID:
2037 	case BCM5397_DEVICE_ID:
2038 	case BCM5398_DEVICE_ID:
2039 		dev->chip_id = id8;
2040 		break;
2041 	default:
2042 		ret = b53_read32(dev, B53_MGMT_PAGE, B53_DEVICE_ID, &id32);
2043 		if (ret)
2044 			return ret;
2045 
2046 		switch (id32) {
2047 		case BCM53115_DEVICE_ID:
2048 		case BCM53125_DEVICE_ID:
2049 		case BCM53128_DEVICE_ID:
2050 		case BCM53010_DEVICE_ID:
2051 		case BCM53011_DEVICE_ID:
2052 		case BCM53012_DEVICE_ID:
2053 		case BCM53018_DEVICE_ID:
2054 		case BCM53019_DEVICE_ID:
2055 			dev->chip_id = id32;
2056 			break;
2057 		default:
2058 			pr_err("unsupported switch detected (BCM53%02x/BCM%x)\n",
2059 			       id8, id32);
2060 			return -ENODEV;
2061 		}
2062 	}
2063 
2064 	if (dev->chip_id == BCM5325_DEVICE_ID)
2065 		return b53_read8(dev, B53_STAT_PAGE, B53_REV_ID_25,
2066 				 &dev->core_rev);
2067 	else
2068 		return b53_read8(dev, B53_MGMT_PAGE, B53_REV_ID,
2069 				 &dev->core_rev);
2070 }
2071 EXPORT_SYMBOL(b53_switch_detect);
2072 
2073 int b53_switch_register(struct b53_device *dev)
2074 {
2075 	int ret;
2076 
2077 	if (dev->pdata) {
2078 		dev->chip_id = dev->pdata->chip_id;
2079 		dev->enabled_ports = dev->pdata->enabled_ports;
2080 	}
2081 
2082 	if (!dev->chip_id && b53_switch_detect(dev))
2083 		return -EINVAL;
2084 
2085 	ret = b53_switch_init(dev);
2086 	if (ret)
2087 		return ret;
2088 
2089 	pr_info("found switch: %s, rev %i\n", dev->name, dev->core_rev);
2090 
2091 	return dsa_register_switch(dev->ds);
2092 }
2093 EXPORT_SYMBOL(b53_switch_register);
2094 
2095 MODULE_AUTHOR("Jonas Gorski <jogo@openwrt.org>");
2096 MODULE_DESCRIPTION("B53 switch library");
2097 MODULE_LICENSE("Dual BSD/GPL");
2098