1# SPDX-License-Identifier: GPL-2.0-only 2menu "Distributed Switch Architecture drivers" 3 depends on NET_DSA 4 5source "drivers/net/dsa/b53/Kconfig" 6 7config NET_DSA_BCM_SF2 8 tristate "Broadcom Starfighter 2 Ethernet switch support" 9 depends on HAS_IOMEM 10 select NET_DSA_TAG_BRCM 11 select FIXED_PHY 12 select BCM7XXX_PHY 13 select MDIO_BCM_UNIMAC 14 select B53 15 help 16 This enables support for the Broadcom Starfighter 2 Ethernet 17 switch chips. 18 19config NET_DSA_LOOP 20 tristate "DSA mock-up Ethernet switch chip support" 21 select FIXED_PHY 22 help 23 This enables support for a fake mock-up switch chip which 24 exercises the DSA APIs. 25 26source "drivers/net/dsa/hirschmann/Kconfig" 27 28config NET_DSA_LANTIQ_GSWIP 29 tristate "Lantiq / Intel GSWIP" 30 depends on HAS_IOMEM 31 select NET_DSA_TAG_GSWIP 32 help 33 This enables support for the Lantiq / Intel GSWIP 2.1 found in 34 the xrx200 / VR9 SoC. 35 36config NET_DSA_MT7530 37 tristate "MediaTek MT753x and MT7621 Ethernet switch support" 38 select NET_DSA_TAG_MTK 39 select MEDIATEK_GE_PHY 40 help 41 This enables support for the MediaTek MT7530, MT7531, and MT7621 42 Ethernet switch chips. 43 44config NET_DSA_MV88E6060 45 tristate "Marvell 88E6060 ethernet switch chip support" 46 select NET_DSA_TAG_TRAILER 47 help 48 This enables support for the Marvell 88E6060 ethernet switch 49 chip. 50 51source "drivers/net/dsa/microchip/Kconfig" 52 53source "drivers/net/dsa/mv88e6xxx/Kconfig" 54 55source "drivers/net/dsa/ocelot/Kconfig" 56 57source "drivers/net/dsa/qca/Kconfig" 58 59source "drivers/net/dsa/sja1105/Kconfig" 60 61source "drivers/net/dsa/xrs700x/Kconfig" 62 63config NET_DSA_QCA8K 64 tristate "Qualcomm Atheros QCA8K Ethernet switch family support" 65 select NET_DSA_TAG_QCA 66 select REGMAP 67 help 68 This enables support for the Qualcomm Atheros QCA8K Ethernet 69 switch chips. 70 71config NET_DSA_REALTEK_SMI 72 tristate "Realtek SMI Ethernet switch family support" 73 select NET_DSA_TAG_RTL4_A 74 select NET_DSA_TAG_RTL8_4 75 select FIXED_PHY 76 select IRQ_DOMAIN 77 select REALTEK_PHY 78 select REGMAP 79 help 80 This enables support for the Realtek SMI-based switch 81 chips, currently only RTL8366RB. 82 83config NET_DSA_SMSC_LAN9303 84 tristate 85 depends on VLAN_8021Q || VLAN_8021Q=n 86 select NET_DSA_TAG_LAN9303 87 select REGMAP 88 help 89 This enables support for the SMSC/Microchip LAN9303 3 port ethernet 90 switch chips. 91 92config NET_DSA_SMSC_LAN9303_I2C 93 tristate "SMSC/Microchip LAN9303 3-ports 10/100 ethernet switch in I2C managed mode" 94 depends on I2C 95 select NET_DSA_SMSC_LAN9303 96 select REGMAP_I2C 97 help 98 Enable access functions if the SMSC/Microchip LAN9303 is configured 99 for I2C managed mode. 100 101config NET_DSA_SMSC_LAN9303_MDIO 102 tristate "SMSC/Microchip LAN9303 3-ports 10/100 ethernet switch in MDIO managed mode" 103 select NET_DSA_SMSC_LAN9303 104 help 105 Enable access functions if the SMSC/Microchip LAN9303 is configured 106 for MDIO managed mode. 107 108config NET_DSA_VITESSE_VSC73XX 109 tristate 110 select FIXED_PHY 111 select VITESSE_PHY 112 select GPIOLIB 113 help 114 This enables support for the Vitesse VSC7385, VSC7388, 115 VSC7395 and VSC7398 SparX integrated ethernet switches. 116 117config NET_DSA_VITESSE_VSC73XX_SPI 118 tristate "Vitesse VSC7385/7388/7395/7398 SPI mode support" 119 depends on SPI 120 select NET_DSA_VITESSE_VSC73XX 121 help 122 This enables support for the Vitesse VSC7385, VSC7388, VSC7395 123 and VSC7398 SparX integrated ethernet switches in SPI managed mode. 124 125config NET_DSA_VITESSE_VSC73XX_PLATFORM 126 tristate "Vitesse VSC7385/7388/7395/7398 Platform mode support" 127 depends on HAS_IOMEM 128 select NET_DSA_VITESSE_VSC73XX 129 help 130 This enables support for the Vitesse VSC7385, VSC7388, VSC7395 131 and VSC7398 SparX integrated ethernet switches, connected over 132 a CPU-attached address bus and work in memory-mapped I/O mode. 133endmenu 134