1 // SPDX-License-Identifier: GPL-2.0-or-later 2 /* Xilinx CAN device driver 3 * 4 * Copyright (C) 2012 - 2022 Xilinx, Inc. 5 * Copyright (C) 2009 PetaLogix. All rights reserved. 6 * Copyright (C) 2017 - 2018 Sandvik Mining and Construction Oy 7 * 8 * Description: 9 * This driver is developed for Axi CAN IP and for Zynq CANPS Controller. 10 */ 11 12 #include <linux/bitfield.h> 13 #include <linux/clk.h> 14 #include <linux/errno.h> 15 #include <linux/ethtool.h> 16 #include <linux/init.h> 17 #include <linux/interrupt.h> 18 #include <linux/io.h> 19 #include <linux/kernel.h> 20 #include <linux/module.h> 21 #include <linux/netdevice.h> 22 #include <linux/of.h> 23 #include <linux/of_device.h> 24 #include <linux/platform_device.h> 25 #include <linux/skbuff.h> 26 #include <linux/spinlock.h> 27 #include <linux/string.h> 28 #include <linux/types.h> 29 #include <linux/can/dev.h> 30 #include <linux/can/error.h> 31 #include <linux/pm_runtime.h> 32 33 #define DRIVER_NAME "xilinx_can" 34 35 /* CAN registers set */ 36 enum xcan_reg { 37 XCAN_SRR_OFFSET = 0x00, /* Software reset */ 38 XCAN_MSR_OFFSET = 0x04, /* Mode select */ 39 XCAN_BRPR_OFFSET = 0x08, /* Baud rate prescaler */ 40 XCAN_BTR_OFFSET = 0x0C, /* Bit timing */ 41 XCAN_ECR_OFFSET = 0x10, /* Error counter */ 42 XCAN_ESR_OFFSET = 0x14, /* Error status */ 43 XCAN_SR_OFFSET = 0x18, /* Status */ 44 XCAN_ISR_OFFSET = 0x1C, /* Interrupt status */ 45 XCAN_IER_OFFSET = 0x20, /* Interrupt enable */ 46 XCAN_ICR_OFFSET = 0x24, /* Interrupt clear */ 47 48 /* not on CAN FD cores */ 49 XCAN_TXFIFO_OFFSET = 0x30, /* TX FIFO base */ 50 XCAN_RXFIFO_OFFSET = 0x50, /* RX FIFO base */ 51 XCAN_AFR_OFFSET = 0x60, /* Acceptance Filter */ 52 53 /* only on CAN FD cores */ 54 XCAN_F_BRPR_OFFSET = 0x088, /* Data Phase Baud Rate 55 * Prescaler 56 */ 57 XCAN_F_BTR_OFFSET = 0x08C, /* Data Phase Bit Timing */ 58 XCAN_TRR_OFFSET = 0x0090, /* TX Buffer Ready Request */ 59 XCAN_AFR_EXT_OFFSET = 0x00E0, /* Acceptance Filter */ 60 XCAN_FSR_OFFSET = 0x00E8, /* RX FIFO Status */ 61 XCAN_TXMSG_BASE_OFFSET = 0x0100, /* TX Message Space */ 62 XCAN_RXMSG_BASE_OFFSET = 0x1100, /* RX Message Space */ 63 XCAN_RXMSG_2_BASE_OFFSET = 0x2100, /* RX Message Space */ 64 XCAN_AFR_2_MASK_OFFSET = 0x0A00, /* Acceptance Filter MASK */ 65 XCAN_AFR_2_ID_OFFSET = 0x0A04, /* Acceptance Filter ID */ 66 }; 67 68 #define XCAN_FRAME_ID_OFFSET(frame_base) ((frame_base) + 0x00) 69 #define XCAN_FRAME_DLC_OFFSET(frame_base) ((frame_base) + 0x04) 70 #define XCAN_FRAME_DW1_OFFSET(frame_base) ((frame_base) + 0x08) 71 #define XCAN_FRAME_DW2_OFFSET(frame_base) ((frame_base) + 0x0C) 72 #define XCANFD_FRAME_DW_OFFSET(frame_base) ((frame_base) + 0x08) 73 74 #define XCAN_CANFD_FRAME_SIZE 0x48 75 #define XCAN_TXMSG_FRAME_OFFSET(n) (XCAN_TXMSG_BASE_OFFSET + \ 76 XCAN_CANFD_FRAME_SIZE * (n)) 77 #define XCAN_RXMSG_FRAME_OFFSET(n) (XCAN_RXMSG_BASE_OFFSET + \ 78 XCAN_CANFD_FRAME_SIZE * (n)) 79 #define XCAN_RXMSG_2_FRAME_OFFSET(n) (XCAN_RXMSG_2_BASE_OFFSET + \ 80 XCAN_CANFD_FRAME_SIZE * (n)) 81 82 /* the single TX mailbox used by this driver on CAN FD HW */ 83 #define XCAN_TX_MAILBOX_IDX 0 84 85 /* CAN register bit masks - XCAN_<REG>_<BIT>_MASK */ 86 #define XCAN_SRR_CEN_MASK 0x00000002 /* CAN enable */ 87 #define XCAN_SRR_RESET_MASK 0x00000001 /* Soft Reset the CAN core */ 88 #define XCAN_MSR_LBACK_MASK 0x00000002 /* Loop back mode select */ 89 #define XCAN_MSR_SLEEP_MASK 0x00000001 /* Sleep mode select */ 90 #define XCAN_BRPR_BRP_MASK 0x000000FF /* Baud rate prescaler */ 91 #define XCAN_BRPR_TDCO_MASK GENMASK(12, 8) /* TDCO */ 92 #define XCAN_2_BRPR_TDCO_MASK GENMASK(13, 8) /* TDCO for CANFD 2.0 */ 93 #define XCAN_BTR_SJW_MASK 0x00000180 /* Synchronous jump width */ 94 #define XCAN_BTR_TS2_MASK 0x00000070 /* Time segment 2 */ 95 #define XCAN_BTR_TS1_MASK 0x0000000F /* Time segment 1 */ 96 #define XCAN_BTR_SJW_MASK_CANFD 0x000F0000 /* Synchronous jump width */ 97 #define XCAN_BTR_TS2_MASK_CANFD 0x00000F00 /* Time segment 2 */ 98 #define XCAN_BTR_TS1_MASK_CANFD 0x0000003F /* Time segment 1 */ 99 #define XCAN_ECR_REC_MASK 0x0000FF00 /* Receive error counter */ 100 #define XCAN_ECR_TEC_MASK 0x000000FF /* Transmit error counter */ 101 #define XCAN_ESR_ACKER_MASK 0x00000010 /* ACK error */ 102 #define XCAN_ESR_BERR_MASK 0x00000008 /* Bit error */ 103 #define XCAN_ESR_STER_MASK 0x00000004 /* Stuff error */ 104 #define XCAN_ESR_FMER_MASK 0x00000002 /* Form error */ 105 #define XCAN_ESR_CRCER_MASK 0x00000001 /* CRC error */ 106 #define XCAN_SR_TDCV_MASK GENMASK(22, 16) /* TDCV Value */ 107 #define XCAN_SR_TXFLL_MASK 0x00000400 /* TX FIFO is full */ 108 #define XCAN_SR_ESTAT_MASK 0x00000180 /* Error status */ 109 #define XCAN_SR_ERRWRN_MASK 0x00000040 /* Error warning */ 110 #define XCAN_SR_NORMAL_MASK 0x00000008 /* Normal mode */ 111 #define XCAN_SR_LBACK_MASK 0x00000002 /* Loop back mode */ 112 #define XCAN_SR_CONFIG_MASK 0x00000001 /* Configuration mode */ 113 #define XCAN_IXR_RXMNF_MASK 0x00020000 /* RX match not finished */ 114 #define XCAN_IXR_TXFEMP_MASK 0x00004000 /* TX FIFO Empty */ 115 #define XCAN_IXR_WKUP_MASK 0x00000800 /* Wake up interrupt */ 116 #define XCAN_IXR_SLP_MASK 0x00000400 /* Sleep interrupt */ 117 #define XCAN_IXR_BSOFF_MASK 0x00000200 /* Bus off interrupt */ 118 #define XCAN_IXR_ERROR_MASK 0x00000100 /* Error interrupt */ 119 #define XCAN_IXR_RXNEMP_MASK 0x00000080 /* RX FIFO NotEmpty intr */ 120 #define XCAN_IXR_RXOFLW_MASK 0x00000040 /* RX FIFO Overflow intr */ 121 #define XCAN_IXR_RXOK_MASK 0x00000010 /* Message received intr */ 122 #define XCAN_IXR_TXFLL_MASK 0x00000004 /* Tx FIFO Full intr */ 123 #define XCAN_IXR_TXOK_MASK 0x00000002 /* TX successful intr */ 124 #define XCAN_IXR_ARBLST_MASK 0x00000001 /* Arbitration lost intr */ 125 #define XCAN_IDR_ID1_MASK 0xFFE00000 /* Standard msg identifier */ 126 #define XCAN_IDR_SRR_MASK 0x00100000 /* Substitute remote TXreq */ 127 #define XCAN_IDR_IDE_MASK 0x00080000 /* Identifier extension */ 128 #define XCAN_IDR_ID2_MASK 0x0007FFFE /* Extended message ident */ 129 #define XCAN_IDR_RTR_MASK 0x00000001 /* Remote TX request */ 130 #define XCAN_DLCR_DLC_MASK 0xF0000000 /* Data length code */ 131 #define XCAN_FSR_FL_MASK 0x00003F00 /* RX Fill Level */ 132 #define XCAN_2_FSR_FL_MASK 0x00007F00 /* RX Fill Level */ 133 #define XCAN_FSR_IRI_MASK 0x00000080 /* RX Increment Read Index */ 134 #define XCAN_FSR_RI_MASK 0x0000001F /* RX Read Index */ 135 #define XCAN_2_FSR_RI_MASK 0x0000003F /* RX Read Index */ 136 #define XCAN_DLCR_EDL_MASK 0x08000000 /* EDL Mask in DLC */ 137 #define XCAN_DLCR_BRS_MASK 0x04000000 /* BRS Mask in DLC */ 138 139 /* CAN register bit shift - XCAN_<REG>_<BIT>_SHIFT */ 140 #define XCAN_BRPR_TDC_ENABLE BIT(16) /* Transmitter Delay Compensation (TDC) Enable */ 141 #define XCAN_BTR_SJW_SHIFT 7 /* Synchronous jump width */ 142 #define XCAN_BTR_TS2_SHIFT 4 /* Time segment 2 */ 143 #define XCAN_BTR_SJW_SHIFT_CANFD 16 /* Synchronous jump width */ 144 #define XCAN_BTR_TS2_SHIFT_CANFD 8 /* Time segment 2 */ 145 #define XCAN_IDR_ID1_SHIFT 21 /* Standard Messg Identifier */ 146 #define XCAN_IDR_ID2_SHIFT 1 /* Extended Message Identifier */ 147 #define XCAN_DLCR_DLC_SHIFT 28 /* Data length code */ 148 #define XCAN_ESR_REC_SHIFT 8 /* Rx Error Count */ 149 150 /* CAN frame length constants */ 151 #define XCAN_FRAME_MAX_DATA_LEN 8 152 #define XCANFD_DW_BYTES 4 153 #define XCAN_TIMEOUT (1 * HZ) 154 155 /* TX-FIFO-empty interrupt available */ 156 #define XCAN_FLAG_TXFEMP 0x0001 157 /* RX Match Not Finished interrupt available */ 158 #define XCAN_FLAG_RXMNF 0x0002 159 /* Extended acceptance filters with control at 0xE0 */ 160 #define XCAN_FLAG_EXT_FILTERS 0x0004 161 /* TX mailboxes instead of TX FIFO */ 162 #define XCAN_FLAG_TX_MAILBOXES 0x0008 163 /* RX FIFO with each buffer in separate registers at 0x1100 164 * instead of the regular FIFO at 0x50 165 */ 166 #define XCAN_FLAG_RX_FIFO_MULTI 0x0010 167 #define XCAN_FLAG_CANFD_2 0x0020 168 169 enum xcan_ip_type { 170 XAXI_CAN = 0, 171 XZYNQ_CANPS, 172 XAXI_CANFD, 173 XAXI_CANFD_2_0, 174 }; 175 176 struct xcan_devtype_data { 177 enum xcan_ip_type cantype; 178 unsigned int flags; 179 const struct can_bittiming_const *bittiming_const; 180 const char *bus_clk_name; 181 unsigned int btr_ts2_shift; 182 unsigned int btr_sjw_shift; 183 }; 184 185 /** 186 * struct xcan_priv - This definition define CAN driver instance 187 * @can: CAN private data structure. 188 * @tx_lock: Lock for synchronizing TX interrupt handling 189 * @tx_head: Tx CAN packets ready to send on the queue 190 * @tx_tail: Tx CAN packets successfully sended on the queue 191 * @tx_max: Maximum number packets the driver can send 192 * @napi: NAPI structure 193 * @read_reg: For reading data from CAN registers 194 * @write_reg: For writing data to CAN registers 195 * @dev: Network device data structure 196 * @reg_base: Ioremapped address to registers 197 * @irq_flags: For request_irq() 198 * @bus_clk: Pointer to struct clk 199 * @can_clk: Pointer to struct clk 200 * @devtype: Device type specific constants 201 */ 202 struct xcan_priv { 203 struct can_priv can; 204 spinlock_t tx_lock; /* Lock for synchronizing TX interrupt handling */ 205 unsigned int tx_head; 206 unsigned int tx_tail; 207 unsigned int tx_max; 208 struct napi_struct napi; 209 u32 (*read_reg)(const struct xcan_priv *priv, enum xcan_reg reg); 210 void (*write_reg)(const struct xcan_priv *priv, enum xcan_reg reg, 211 u32 val); 212 struct device *dev; 213 void __iomem *reg_base; 214 unsigned long irq_flags; 215 struct clk *bus_clk; 216 struct clk *can_clk; 217 struct xcan_devtype_data devtype; 218 }; 219 220 /* CAN Bittiming constants as per Xilinx CAN specs */ 221 static const struct can_bittiming_const xcan_bittiming_const = { 222 .name = DRIVER_NAME, 223 .tseg1_min = 1, 224 .tseg1_max = 16, 225 .tseg2_min = 1, 226 .tseg2_max = 8, 227 .sjw_max = 4, 228 .brp_min = 1, 229 .brp_max = 256, 230 .brp_inc = 1, 231 }; 232 233 /* AXI CANFD Arbitration Bittiming constants as per AXI CANFD 1.0 spec */ 234 static const struct can_bittiming_const xcan_bittiming_const_canfd = { 235 .name = DRIVER_NAME, 236 .tseg1_min = 1, 237 .tseg1_max = 64, 238 .tseg2_min = 1, 239 .tseg2_max = 16, 240 .sjw_max = 16, 241 .brp_min = 1, 242 .brp_max = 256, 243 .brp_inc = 1, 244 }; 245 246 /* AXI CANFD Data Bittiming constants as per AXI CANFD 1.0 specs */ 247 static const struct can_bittiming_const xcan_data_bittiming_const_canfd = { 248 .name = DRIVER_NAME, 249 .tseg1_min = 1, 250 .tseg1_max = 16, 251 .tseg2_min = 1, 252 .tseg2_max = 8, 253 .sjw_max = 8, 254 .brp_min = 1, 255 .brp_max = 256, 256 .brp_inc = 1, 257 }; 258 259 /* AXI CANFD 2.0 Arbitration Bittiming constants as per AXI CANFD 2.0 spec */ 260 static const struct can_bittiming_const xcan_bittiming_const_canfd2 = { 261 .name = DRIVER_NAME, 262 .tseg1_min = 1, 263 .tseg1_max = 256, 264 .tseg2_min = 1, 265 .tseg2_max = 128, 266 .sjw_max = 128, 267 .brp_min = 1, 268 .brp_max = 256, 269 .brp_inc = 1, 270 }; 271 272 /* AXI CANFD 2.0 Data Bittiming constants as per AXI CANFD 2.0 spec */ 273 static const struct can_bittiming_const xcan_data_bittiming_const_canfd2 = { 274 .name = DRIVER_NAME, 275 .tseg1_min = 1, 276 .tseg1_max = 32, 277 .tseg2_min = 1, 278 .tseg2_max = 16, 279 .sjw_max = 16, 280 .brp_min = 1, 281 .brp_max = 256, 282 .brp_inc = 1, 283 }; 284 285 /* Transmission Delay Compensation constants for CANFD 1.0 */ 286 static const struct can_tdc_const xcan_tdc_const_canfd = { 287 .tdcv_min = 0, 288 .tdcv_max = 0, /* Manual mode not supported. */ 289 .tdco_min = 0, 290 .tdco_max = 32, 291 .tdcf_min = 0, /* Filter window not supported */ 292 .tdcf_max = 0, 293 }; 294 295 /* Transmission Delay Compensation constants for CANFD 2.0 */ 296 static const struct can_tdc_const xcan_tdc_const_canfd2 = { 297 .tdcv_min = 0, 298 .tdcv_max = 0, /* Manual mode not supported. */ 299 .tdco_min = 0, 300 .tdco_max = 64, 301 .tdcf_min = 0, /* Filter window not supported */ 302 .tdcf_max = 0, 303 }; 304 305 /** 306 * xcan_write_reg_le - Write a value to the device register little endian 307 * @priv: Driver private data structure 308 * @reg: Register offset 309 * @val: Value to write at the Register offset 310 * 311 * Write data to the paricular CAN register 312 */ 313 static void xcan_write_reg_le(const struct xcan_priv *priv, enum xcan_reg reg, 314 u32 val) 315 { 316 iowrite32(val, priv->reg_base + reg); 317 } 318 319 /** 320 * xcan_read_reg_le - Read a value from the device register little endian 321 * @priv: Driver private data structure 322 * @reg: Register offset 323 * 324 * Read data from the particular CAN register 325 * Return: value read from the CAN register 326 */ 327 static u32 xcan_read_reg_le(const struct xcan_priv *priv, enum xcan_reg reg) 328 { 329 return ioread32(priv->reg_base + reg); 330 } 331 332 /** 333 * xcan_write_reg_be - Write a value to the device register big endian 334 * @priv: Driver private data structure 335 * @reg: Register offset 336 * @val: Value to write at the Register offset 337 * 338 * Write data to the paricular CAN register 339 */ 340 static void xcan_write_reg_be(const struct xcan_priv *priv, enum xcan_reg reg, 341 u32 val) 342 { 343 iowrite32be(val, priv->reg_base + reg); 344 } 345 346 /** 347 * xcan_read_reg_be - Read a value from the device register big endian 348 * @priv: Driver private data structure 349 * @reg: Register offset 350 * 351 * Read data from the particular CAN register 352 * Return: value read from the CAN register 353 */ 354 static u32 xcan_read_reg_be(const struct xcan_priv *priv, enum xcan_reg reg) 355 { 356 return ioread32be(priv->reg_base + reg); 357 } 358 359 /** 360 * xcan_rx_int_mask - Get the mask for the receive interrupt 361 * @priv: Driver private data structure 362 * 363 * Return: The receive interrupt mask used by the driver on this HW 364 */ 365 static u32 xcan_rx_int_mask(const struct xcan_priv *priv) 366 { 367 /* RXNEMP is better suited for our use case as it cannot be cleared 368 * while the FIFO is non-empty, but CAN FD HW does not have it 369 */ 370 if (priv->devtype.flags & XCAN_FLAG_RX_FIFO_MULTI) 371 return XCAN_IXR_RXOK_MASK; 372 else 373 return XCAN_IXR_RXNEMP_MASK; 374 } 375 376 /** 377 * set_reset_mode - Resets the CAN device mode 378 * @ndev: Pointer to net_device structure 379 * 380 * This is the driver reset mode routine.The driver 381 * enters into configuration mode. 382 * 383 * Return: 0 on success and failure value on error 384 */ 385 static int set_reset_mode(struct net_device *ndev) 386 { 387 struct xcan_priv *priv = netdev_priv(ndev); 388 unsigned long timeout; 389 390 priv->write_reg(priv, XCAN_SRR_OFFSET, XCAN_SRR_RESET_MASK); 391 392 timeout = jiffies + XCAN_TIMEOUT; 393 while (!(priv->read_reg(priv, XCAN_SR_OFFSET) & XCAN_SR_CONFIG_MASK)) { 394 if (time_after(jiffies, timeout)) { 395 netdev_warn(ndev, "timed out for config mode\n"); 396 return -ETIMEDOUT; 397 } 398 usleep_range(500, 10000); 399 } 400 401 /* reset clears FIFOs */ 402 priv->tx_head = 0; 403 priv->tx_tail = 0; 404 405 return 0; 406 } 407 408 /** 409 * xcan_set_bittiming - CAN set bit timing routine 410 * @ndev: Pointer to net_device structure 411 * 412 * This is the driver set bittiming routine. 413 * Return: 0 on success and failure value on error 414 */ 415 static int xcan_set_bittiming(struct net_device *ndev) 416 { 417 struct xcan_priv *priv = netdev_priv(ndev); 418 struct can_bittiming *bt = &priv->can.bittiming; 419 struct can_bittiming *dbt = &priv->can.data_bittiming; 420 u32 btr0, btr1; 421 u32 is_config_mode; 422 423 /* Check whether Xilinx CAN is in configuration mode. 424 * It cannot set bit timing if Xilinx CAN is not in configuration mode. 425 */ 426 is_config_mode = priv->read_reg(priv, XCAN_SR_OFFSET) & 427 XCAN_SR_CONFIG_MASK; 428 if (!is_config_mode) { 429 netdev_alert(ndev, 430 "BUG! Cannot set bittiming - CAN is not in config mode\n"); 431 return -EPERM; 432 } 433 434 /* Setting Baud Rate prescaler value in BRPR Register */ 435 btr0 = (bt->brp - 1); 436 437 /* Setting Time Segment 1 in BTR Register */ 438 btr1 = (bt->prop_seg + bt->phase_seg1 - 1); 439 440 /* Setting Time Segment 2 in BTR Register */ 441 btr1 |= (bt->phase_seg2 - 1) << priv->devtype.btr_ts2_shift; 442 443 /* Setting Synchronous jump width in BTR Register */ 444 btr1 |= (bt->sjw - 1) << priv->devtype.btr_sjw_shift; 445 446 priv->write_reg(priv, XCAN_BRPR_OFFSET, btr0); 447 priv->write_reg(priv, XCAN_BTR_OFFSET, btr1); 448 449 if (priv->devtype.cantype == XAXI_CANFD || 450 priv->devtype.cantype == XAXI_CANFD_2_0) { 451 /* Setting Baud Rate prescaler value in F_BRPR Register */ 452 btr0 = dbt->brp - 1; 453 if (can_tdc_is_enabled(&priv->can)) { 454 if (priv->devtype.cantype == XAXI_CANFD) 455 btr0 |= FIELD_PREP(XCAN_BRPR_TDCO_MASK, priv->can.tdc.tdco) | 456 XCAN_BRPR_TDC_ENABLE; 457 else 458 btr0 |= FIELD_PREP(XCAN_2_BRPR_TDCO_MASK, priv->can.tdc.tdco) | 459 XCAN_BRPR_TDC_ENABLE; 460 } 461 462 /* Setting Time Segment 1 in BTR Register */ 463 btr1 = dbt->prop_seg + dbt->phase_seg1 - 1; 464 465 /* Setting Time Segment 2 in BTR Register */ 466 btr1 |= (dbt->phase_seg2 - 1) << priv->devtype.btr_ts2_shift; 467 468 /* Setting Synchronous jump width in BTR Register */ 469 btr1 |= (dbt->sjw - 1) << priv->devtype.btr_sjw_shift; 470 471 priv->write_reg(priv, XCAN_F_BRPR_OFFSET, btr0); 472 priv->write_reg(priv, XCAN_F_BTR_OFFSET, btr1); 473 } 474 475 netdev_dbg(ndev, "BRPR=0x%08x, BTR=0x%08x\n", 476 priv->read_reg(priv, XCAN_BRPR_OFFSET), 477 priv->read_reg(priv, XCAN_BTR_OFFSET)); 478 479 return 0; 480 } 481 482 /** 483 * xcan_chip_start - This the drivers start routine 484 * @ndev: Pointer to net_device structure 485 * 486 * This is the drivers start routine. 487 * Based on the State of the CAN device it puts 488 * the CAN device into a proper mode. 489 * 490 * Return: 0 on success and failure value on error 491 */ 492 static int xcan_chip_start(struct net_device *ndev) 493 { 494 struct xcan_priv *priv = netdev_priv(ndev); 495 u32 reg_msr; 496 int err; 497 u32 ier; 498 499 /* Check if it is in reset mode */ 500 err = set_reset_mode(ndev); 501 if (err < 0) 502 return err; 503 504 err = xcan_set_bittiming(ndev); 505 if (err < 0) 506 return err; 507 508 /* Enable interrupts 509 * 510 * We enable the ERROR interrupt even with 511 * CAN_CTRLMODE_BERR_REPORTING disabled as there is no 512 * dedicated interrupt for a state change to 513 * ERROR_WARNING/ERROR_PASSIVE. 514 */ 515 ier = XCAN_IXR_TXOK_MASK | XCAN_IXR_BSOFF_MASK | 516 XCAN_IXR_WKUP_MASK | XCAN_IXR_SLP_MASK | 517 XCAN_IXR_ERROR_MASK | XCAN_IXR_RXOFLW_MASK | 518 XCAN_IXR_ARBLST_MASK | xcan_rx_int_mask(priv); 519 520 if (priv->devtype.flags & XCAN_FLAG_RXMNF) 521 ier |= XCAN_IXR_RXMNF_MASK; 522 523 priv->write_reg(priv, XCAN_IER_OFFSET, ier); 524 525 /* Check whether it is loopback mode or normal mode */ 526 if (priv->can.ctrlmode & CAN_CTRLMODE_LOOPBACK) 527 reg_msr = XCAN_MSR_LBACK_MASK; 528 else 529 reg_msr = 0x0; 530 531 /* enable the first extended filter, if any, as cores with extended 532 * filtering default to non-receipt if all filters are disabled 533 */ 534 if (priv->devtype.flags & XCAN_FLAG_EXT_FILTERS) 535 priv->write_reg(priv, XCAN_AFR_EXT_OFFSET, 0x00000001); 536 537 priv->write_reg(priv, XCAN_MSR_OFFSET, reg_msr); 538 priv->write_reg(priv, XCAN_SRR_OFFSET, XCAN_SRR_CEN_MASK); 539 540 netdev_dbg(ndev, "status:#x%08x\n", 541 priv->read_reg(priv, XCAN_SR_OFFSET)); 542 543 priv->can.state = CAN_STATE_ERROR_ACTIVE; 544 return 0; 545 } 546 547 /** 548 * xcan_do_set_mode - This sets the mode of the driver 549 * @ndev: Pointer to net_device structure 550 * @mode: Tells the mode of the driver 551 * 552 * This check the drivers state and calls the corresponding modes to set. 553 * 554 * Return: 0 on success and failure value on error 555 */ 556 static int xcan_do_set_mode(struct net_device *ndev, enum can_mode mode) 557 { 558 int ret; 559 560 switch (mode) { 561 case CAN_MODE_START: 562 ret = xcan_chip_start(ndev); 563 if (ret < 0) { 564 netdev_err(ndev, "xcan_chip_start failed!\n"); 565 return ret; 566 } 567 netif_wake_queue(ndev); 568 break; 569 default: 570 ret = -EOPNOTSUPP; 571 break; 572 } 573 574 return ret; 575 } 576 577 /** 578 * xcan_write_frame - Write a frame to HW 579 * @ndev: Pointer to net_device structure 580 * @skb: sk_buff pointer that contains data to be Txed 581 * @frame_offset: Register offset to write the frame to 582 */ 583 static void xcan_write_frame(struct net_device *ndev, struct sk_buff *skb, 584 int frame_offset) 585 { 586 u32 id, dlc, data[2] = {0, 0}; 587 struct canfd_frame *cf = (struct canfd_frame *)skb->data; 588 u32 ramoff, dwindex = 0, i; 589 struct xcan_priv *priv = netdev_priv(ndev); 590 591 /* Watch carefully on the bit sequence */ 592 if (cf->can_id & CAN_EFF_FLAG) { 593 /* Extended CAN ID format */ 594 id = ((cf->can_id & CAN_EFF_MASK) << XCAN_IDR_ID2_SHIFT) & 595 XCAN_IDR_ID2_MASK; 596 id |= (((cf->can_id & CAN_EFF_MASK) >> 597 (CAN_EFF_ID_BITS - CAN_SFF_ID_BITS)) << 598 XCAN_IDR_ID1_SHIFT) & XCAN_IDR_ID1_MASK; 599 600 /* The substibute remote TX request bit should be "1" 601 * for extended frames as in the Xilinx CAN datasheet 602 */ 603 id |= XCAN_IDR_IDE_MASK | XCAN_IDR_SRR_MASK; 604 605 if (cf->can_id & CAN_RTR_FLAG) 606 /* Extended frames remote TX request */ 607 id |= XCAN_IDR_RTR_MASK; 608 } else { 609 /* Standard CAN ID format */ 610 id = ((cf->can_id & CAN_SFF_MASK) << XCAN_IDR_ID1_SHIFT) & 611 XCAN_IDR_ID1_MASK; 612 613 if (cf->can_id & CAN_RTR_FLAG) 614 /* Standard frames remote TX request */ 615 id |= XCAN_IDR_SRR_MASK; 616 } 617 618 dlc = can_fd_len2dlc(cf->len) << XCAN_DLCR_DLC_SHIFT; 619 if (can_is_canfd_skb(skb)) { 620 if (cf->flags & CANFD_BRS) 621 dlc |= XCAN_DLCR_BRS_MASK; 622 dlc |= XCAN_DLCR_EDL_MASK; 623 } 624 625 if (!(priv->devtype.flags & XCAN_FLAG_TX_MAILBOXES) && 626 (priv->devtype.flags & XCAN_FLAG_TXFEMP)) 627 can_put_echo_skb(skb, ndev, priv->tx_head % priv->tx_max, 0); 628 else 629 can_put_echo_skb(skb, ndev, 0, 0); 630 631 priv->tx_head++; 632 633 priv->write_reg(priv, XCAN_FRAME_ID_OFFSET(frame_offset), id); 634 /* If the CAN frame is RTR frame this write triggers transmission 635 * (not on CAN FD) 636 */ 637 priv->write_reg(priv, XCAN_FRAME_DLC_OFFSET(frame_offset), dlc); 638 if (priv->devtype.cantype == XAXI_CANFD || 639 priv->devtype.cantype == XAXI_CANFD_2_0) { 640 for (i = 0; i < cf->len; i += 4) { 641 ramoff = XCANFD_FRAME_DW_OFFSET(frame_offset) + 642 (dwindex * XCANFD_DW_BYTES); 643 priv->write_reg(priv, ramoff, 644 be32_to_cpup((__be32 *)(cf->data + i))); 645 dwindex++; 646 } 647 } else { 648 if (cf->len > 0) 649 data[0] = be32_to_cpup((__be32 *)(cf->data + 0)); 650 if (cf->len > 4) 651 data[1] = be32_to_cpup((__be32 *)(cf->data + 4)); 652 653 if (!(cf->can_id & CAN_RTR_FLAG)) { 654 priv->write_reg(priv, 655 XCAN_FRAME_DW1_OFFSET(frame_offset), 656 data[0]); 657 /* If the CAN frame is Standard/Extended frame this 658 * write triggers transmission (not on CAN FD) 659 */ 660 priv->write_reg(priv, 661 XCAN_FRAME_DW2_OFFSET(frame_offset), 662 data[1]); 663 } 664 } 665 } 666 667 /** 668 * xcan_start_xmit_fifo - Starts the transmission (FIFO mode) 669 * @skb: sk_buff pointer that contains data to be Txed 670 * @ndev: Pointer to net_device structure 671 * 672 * Return: 0 on success, -ENOSPC if FIFO is full. 673 */ 674 static int xcan_start_xmit_fifo(struct sk_buff *skb, struct net_device *ndev) 675 { 676 struct xcan_priv *priv = netdev_priv(ndev); 677 unsigned long flags; 678 679 /* Check if the TX buffer is full */ 680 if (unlikely(priv->read_reg(priv, XCAN_SR_OFFSET) & 681 XCAN_SR_TXFLL_MASK)) 682 return -ENOSPC; 683 684 spin_lock_irqsave(&priv->tx_lock, flags); 685 686 xcan_write_frame(ndev, skb, XCAN_TXFIFO_OFFSET); 687 688 /* Clear TX-FIFO-empty interrupt for xcan_tx_interrupt() */ 689 if (priv->tx_max > 1) 690 priv->write_reg(priv, XCAN_ICR_OFFSET, XCAN_IXR_TXFEMP_MASK); 691 692 /* Check if the TX buffer is full */ 693 if ((priv->tx_head - priv->tx_tail) == priv->tx_max) 694 netif_stop_queue(ndev); 695 696 spin_unlock_irqrestore(&priv->tx_lock, flags); 697 698 return 0; 699 } 700 701 /** 702 * xcan_start_xmit_mailbox - Starts the transmission (mailbox mode) 703 * @skb: sk_buff pointer that contains data to be Txed 704 * @ndev: Pointer to net_device structure 705 * 706 * Return: 0 on success, -ENOSPC if there is no space 707 */ 708 static int xcan_start_xmit_mailbox(struct sk_buff *skb, struct net_device *ndev) 709 { 710 struct xcan_priv *priv = netdev_priv(ndev); 711 unsigned long flags; 712 713 if (unlikely(priv->read_reg(priv, XCAN_TRR_OFFSET) & 714 BIT(XCAN_TX_MAILBOX_IDX))) 715 return -ENOSPC; 716 717 spin_lock_irqsave(&priv->tx_lock, flags); 718 719 xcan_write_frame(ndev, skb, 720 XCAN_TXMSG_FRAME_OFFSET(XCAN_TX_MAILBOX_IDX)); 721 722 /* Mark buffer as ready for transmit */ 723 priv->write_reg(priv, XCAN_TRR_OFFSET, BIT(XCAN_TX_MAILBOX_IDX)); 724 725 netif_stop_queue(ndev); 726 727 spin_unlock_irqrestore(&priv->tx_lock, flags); 728 729 return 0; 730 } 731 732 /** 733 * xcan_start_xmit - Starts the transmission 734 * @skb: sk_buff pointer that contains data to be Txed 735 * @ndev: Pointer to net_device structure 736 * 737 * This function is invoked from upper layers to initiate transmission. 738 * 739 * Return: NETDEV_TX_OK on success and NETDEV_TX_BUSY when the tx queue is full 740 */ 741 static netdev_tx_t xcan_start_xmit(struct sk_buff *skb, struct net_device *ndev) 742 { 743 struct xcan_priv *priv = netdev_priv(ndev); 744 int ret; 745 746 if (can_dropped_invalid_skb(ndev, skb)) 747 return NETDEV_TX_OK; 748 749 if (priv->devtype.flags & XCAN_FLAG_TX_MAILBOXES) 750 ret = xcan_start_xmit_mailbox(skb, ndev); 751 else 752 ret = xcan_start_xmit_fifo(skb, ndev); 753 754 if (ret < 0) { 755 netdev_err(ndev, "BUG!, TX full when queue awake!\n"); 756 netif_stop_queue(ndev); 757 return NETDEV_TX_BUSY; 758 } 759 760 return NETDEV_TX_OK; 761 } 762 763 /** 764 * xcan_rx - Is called from CAN isr to complete the received 765 * frame processing 766 * @ndev: Pointer to net_device structure 767 * @frame_base: Register offset to the frame to be read 768 * 769 * This function is invoked from the CAN isr(poll) to process the Rx frames. It 770 * does minimal processing and invokes "netif_receive_skb" to complete further 771 * processing. 772 * Return: 1 on success and 0 on failure. 773 */ 774 static int xcan_rx(struct net_device *ndev, int frame_base) 775 { 776 struct xcan_priv *priv = netdev_priv(ndev); 777 struct net_device_stats *stats = &ndev->stats; 778 struct can_frame *cf; 779 struct sk_buff *skb; 780 u32 id_xcan, dlc, data[2] = {0, 0}; 781 782 skb = alloc_can_skb(ndev, &cf); 783 if (unlikely(!skb)) { 784 stats->rx_dropped++; 785 return 0; 786 } 787 788 /* Read a frame from Xilinx zynq CANPS */ 789 id_xcan = priv->read_reg(priv, XCAN_FRAME_ID_OFFSET(frame_base)); 790 dlc = priv->read_reg(priv, XCAN_FRAME_DLC_OFFSET(frame_base)) >> 791 XCAN_DLCR_DLC_SHIFT; 792 793 /* Change Xilinx CAN data length format to socketCAN data format */ 794 cf->len = can_cc_dlc2len(dlc); 795 796 /* Change Xilinx CAN ID format to socketCAN ID format */ 797 if (id_xcan & XCAN_IDR_IDE_MASK) { 798 /* The received frame is an Extended format frame */ 799 cf->can_id = (id_xcan & XCAN_IDR_ID1_MASK) >> 3; 800 cf->can_id |= (id_xcan & XCAN_IDR_ID2_MASK) >> 801 XCAN_IDR_ID2_SHIFT; 802 cf->can_id |= CAN_EFF_FLAG; 803 if (id_xcan & XCAN_IDR_RTR_MASK) 804 cf->can_id |= CAN_RTR_FLAG; 805 } else { 806 /* The received frame is a standard format frame */ 807 cf->can_id = (id_xcan & XCAN_IDR_ID1_MASK) >> 808 XCAN_IDR_ID1_SHIFT; 809 if (id_xcan & XCAN_IDR_SRR_MASK) 810 cf->can_id |= CAN_RTR_FLAG; 811 } 812 813 /* DW1/DW2 must always be read to remove message from RXFIFO */ 814 data[0] = priv->read_reg(priv, XCAN_FRAME_DW1_OFFSET(frame_base)); 815 data[1] = priv->read_reg(priv, XCAN_FRAME_DW2_OFFSET(frame_base)); 816 817 if (!(cf->can_id & CAN_RTR_FLAG)) { 818 /* Change Xilinx CAN data format to socketCAN data format */ 819 if (cf->len > 0) 820 *(__be32 *)(cf->data) = cpu_to_be32(data[0]); 821 if (cf->len > 4) 822 *(__be32 *)(cf->data + 4) = cpu_to_be32(data[1]); 823 824 stats->rx_bytes += cf->len; 825 } 826 stats->rx_packets++; 827 828 netif_receive_skb(skb); 829 830 return 1; 831 } 832 833 /** 834 * xcanfd_rx - Is called from CAN isr to complete the received 835 * frame processing 836 * @ndev: Pointer to net_device structure 837 * @frame_base: Register offset to the frame to be read 838 * 839 * This function is invoked from the CAN isr(poll) to process the Rx frames. It 840 * does minimal processing and invokes "netif_receive_skb" to complete further 841 * processing. 842 * Return: 1 on success and 0 on failure. 843 */ 844 static int xcanfd_rx(struct net_device *ndev, int frame_base) 845 { 846 struct xcan_priv *priv = netdev_priv(ndev); 847 struct net_device_stats *stats = &ndev->stats; 848 struct canfd_frame *cf; 849 struct sk_buff *skb; 850 u32 id_xcan, dlc, data[2] = {0, 0}, dwindex = 0, i, dw_offset; 851 852 id_xcan = priv->read_reg(priv, XCAN_FRAME_ID_OFFSET(frame_base)); 853 dlc = priv->read_reg(priv, XCAN_FRAME_DLC_OFFSET(frame_base)); 854 if (dlc & XCAN_DLCR_EDL_MASK) 855 skb = alloc_canfd_skb(ndev, &cf); 856 else 857 skb = alloc_can_skb(ndev, (struct can_frame **)&cf); 858 859 if (unlikely(!skb)) { 860 stats->rx_dropped++; 861 return 0; 862 } 863 864 /* Change Xilinx CANFD data length format to socketCAN data 865 * format 866 */ 867 if (dlc & XCAN_DLCR_EDL_MASK) 868 cf->len = can_fd_dlc2len((dlc & XCAN_DLCR_DLC_MASK) >> 869 XCAN_DLCR_DLC_SHIFT); 870 else 871 cf->len = can_cc_dlc2len((dlc & XCAN_DLCR_DLC_MASK) >> 872 XCAN_DLCR_DLC_SHIFT); 873 874 /* Change Xilinx CAN ID format to socketCAN ID format */ 875 if (id_xcan & XCAN_IDR_IDE_MASK) { 876 /* The received frame is an Extended format frame */ 877 cf->can_id = (id_xcan & XCAN_IDR_ID1_MASK) >> 3; 878 cf->can_id |= (id_xcan & XCAN_IDR_ID2_MASK) >> 879 XCAN_IDR_ID2_SHIFT; 880 cf->can_id |= CAN_EFF_FLAG; 881 if (id_xcan & XCAN_IDR_RTR_MASK) 882 cf->can_id |= CAN_RTR_FLAG; 883 } else { 884 /* The received frame is a standard format frame */ 885 cf->can_id = (id_xcan & XCAN_IDR_ID1_MASK) >> 886 XCAN_IDR_ID1_SHIFT; 887 if (!(dlc & XCAN_DLCR_EDL_MASK) && (id_xcan & 888 XCAN_IDR_SRR_MASK)) 889 cf->can_id |= CAN_RTR_FLAG; 890 } 891 892 /* Check the frame received is FD or not*/ 893 if (dlc & XCAN_DLCR_EDL_MASK) { 894 for (i = 0; i < cf->len; i += 4) { 895 dw_offset = XCANFD_FRAME_DW_OFFSET(frame_base) + 896 (dwindex * XCANFD_DW_BYTES); 897 data[0] = priv->read_reg(priv, dw_offset); 898 *(__be32 *)(cf->data + i) = cpu_to_be32(data[0]); 899 dwindex++; 900 } 901 } else { 902 for (i = 0; i < cf->len; i += 4) { 903 dw_offset = XCANFD_FRAME_DW_OFFSET(frame_base); 904 data[0] = priv->read_reg(priv, dw_offset + i); 905 *(__be32 *)(cf->data + i) = cpu_to_be32(data[0]); 906 } 907 } 908 909 if (!(cf->can_id & CAN_RTR_FLAG)) 910 stats->rx_bytes += cf->len; 911 stats->rx_packets++; 912 913 netif_receive_skb(skb); 914 915 return 1; 916 } 917 918 /** 919 * xcan_current_error_state - Get current error state from HW 920 * @ndev: Pointer to net_device structure 921 * 922 * Checks the current CAN error state from the HW. Note that this 923 * only checks for ERROR_PASSIVE and ERROR_WARNING. 924 * 925 * Return: 926 * ERROR_PASSIVE or ERROR_WARNING if either is active, ERROR_ACTIVE 927 * otherwise. 928 */ 929 static enum can_state xcan_current_error_state(struct net_device *ndev) 930 { 931 struct xcan_priv *priv = netdev_priv(ndev); 932 u32 status = priv->read_reg(priv, XCAN_SR_OFFSET); 933 934 if ((status & XCAN_SR_ESTAT_MASK) == XCAN_SR_ESTAT_MASK) 935 return CAN_STATE_ERROR_PASSIVE; 936 else if (status & XCAN_SR_ERRWRN_MASK) 937 return CAN_STATE_ERROR_WARNING; 938 else 939 return CAN_STATE_ERROR_ACTIVE; 940 } 941 942 /** 943 * xcan_set_error_state - Set new CAN error state 944 * @ndev: Pointer to net_device structure 945 * @new_state: The new CAN state to be set 946 * @cf: Error frame to be populated or NULL 947 * 948 * Set new CAN error state for the device, updating statistics and 949 * populating the error frame if given. 950 */ 951 static void xcan_set_error_state(struct net_device *ndev, 952 enum can_state new_state, 953 struct can_frame *cf) 954 { 955 struct xcan_priv *priv = netdev_priv(ndev); 956 u32 ecr = priv->read_reg(priv, XCAN_ECR_OFFSET); 957 u32 txerr = ecr & XCAN_ECR_TEC_MASK; 958 u32 rxerr = (ecr & XCAN_ECR_REC_MASK) >> XCAN_ESR_REC_SHIFT; 959 enum can_state tx_state = txerr >= rxerr ? new_state : 0; 960 enum can_state rx_state = txerr <= rxerr ? new_state : 0; 961 962 /* non-ERROR states are handled elsewhere */ 963 if (WARN_ON(new_state > CAN_STATE_ERROR_PASSIVE)) 964 return; 965 966 can_change_state(ndev, cf, tx_state, rx_state); 967 968 if (cf) { 969 cf->can_id |= CAN_ERR_CNT; 970 cf->data[6] = txerr; 971 cf->data[7] = rxerr; 972 } 973 } 974 975 /** 976 * xcan_update_error_state_after_rxtx - Update CAN error state after RX/TX 977 * @ndev: Pointer to net_device structure 978 * 979 * If the device is in a ERROR-WARNING or ERROR-PASSIVE state, check if 980 * the performed RX/TX has caused it to drop to a lesser state and set 981 * the interface state accordingly. 982 */ 983 static void xcan_update_error_state_after_rxtx(struct net_device *ndev) 984 { 985 struct xcan_priv *priv = netdev_priv(ndev); 986 enum can_state old_state = priv->can.state; 987 enum can_state new_state; 988 989 /* changing error state due to successful frame RX/TX can only 990 * occur from these states 991 */ 992 if (old_state != CAN_STATE_ERROR_WARNING && 993 old_state != CAN_STATE_ERROR_PASSIVE) 994 return; 995 996 new_state = xcan_current_error_state(ndev); 997 998 if (new_state != old_state) { 999 struct sk_buff *skb; 1000 struct can_frame *cf; 1001 1002 skb = alloc_can_err_skb(ndev, &cf); 1003 1004 xcan_set_error_state(ndev, new_state, skb ? cf : NULL); 1005 1006 if (skb) 1007 netif_rx(skb); 1008 } 1009 } 1010 1011 /** 1012 * xcan_err_interrupt - error frame Isr 1013 * @ndev: net_device pointer 1014 * @isr: interrupt status register value 1015 * 1016 * This is the CAN error interrupt and it will 1017 * check the type of error and forward the error 1018 * frame to upper layers. 1019 */ 1020 static void xcan_err_interrupt(struct net_device *ndev, u32 isr) 1021 { 1022 struct xcan_priv *priv = netdev_priv(ndev); 1023 struct net_device_stats *stats = &ndev->stats; 1024 struct can_frame cf = { }; 1025 u32 err_status; 1026 1027 err_status = priv->read_reg(priv, XCAN_ESR_OFFSET); 1028 priv->write_reg(priv, XCAN_ESR_OFFSET, err_status); 1029 1030 if (isr & XCAN_IXR_BSOFF_MASK) { 1031 priv->can.state = CAN_STATE_BUS_OFF; 1032 priv->can.can_stats.bus_off++; 1033 /* Leave device in Config Mode in bus-off state */ 1034 priv->write_reg(priv, XCAN_SRR_OFFSET, XCAN_SRR_RESET_MASK); 1035 can_bus_off(ndev); 1036 cf.can_id |= CAN_ERR_BUSOFF; 1037 } else { 1038 enum can_state new_state = xcan_current_error_state(ndev); 1039 1040 if (new_state != priv->can.state) 1041 xcan_set_error_state(ndev, new_state, &cf); 1042 } 1043 1044 /* Check for Arbitration lost interrupt */ 1045 if (isr & XCAN_IXR_ARBLST_MASK) { 1046 priv->can.can_stats.arbitration_lost++; 1047 cf.can_id |= CAN_ERR_LOSTARB; 1048 cf.data[0] = CAN_ERR_LOSTARB_UNSPEC; 1049 } 1050 1051 /* Check for RX FIFO Overflow interrupt */ 1052 if (isr & XCAN_IXR_RXOFLW_MASK) { 1053 stats->rx_over_errors++; 1054 stats->rx_errors++; 1055 cf.can_id |= CAN_ERR_CRTL; 1056 cf.data[1] |= CAN_ERR_CRTL_RX_OVERFLOW; 1057 } 1058 1059 /* Check for RX Match Not Finished interrupt */ 1060 if (isr & XCAN_IXR_RXMNF_MASK) { 1061 stats->rx_dropped++; 1062 stats->rx_errors++; 1063 netdev_err(ndev, "RX match not finished, frame discarded\n"); 1064 cf.can_id |= CAN_ERR_CRTL; 1065 cf.data[1] |= CAN_ERR_CRTL_UNSPEC; 1066 } 1067 1068 /* Check for error interrupt */ 1069 if (isr & XCAN_IXR_ERROR_MASK) { 1070 bool berr_reporting = false; 1071 1072 if (priv->can.ctrlmode & CAN_CTRLMODE_BERR_REPORTING) { 1073 berr_reporting = true; 1074 cf.can_id |= CAN_ERR_PROT | CAN_ERR_BUSERROR; 1075 } 1076 1077 /* Check for Ack error interrupt */ 1078 if (err_status & XCAN_ESR_ACKER_MASK) { 1079 stats->tx_errors++; 1080 if (berr_reporting) { 1081 cf.can_id |= CAN_ERR_ACK; 1082 cf.data[3] = CAN_ERR_PROT_LOC_ACK; 1083 } 1084 } 1085 1086 /* Check for Bit error interrupt */ 1087 if (err_status & XCAN_ESR_BERR_MASK) { 1088 stats->tx_errors++; 1089 if (berr_reporting) { 1090 cf.can_id |= CAN_ERR_PROT; 1091 cf.data[2] = CAN_ERR_PROT_BIT; 1092 } 1093 } 1094 1095 /* Check for Stuff error interrupt */ 1096 if (err_status & XCAN_ESR_STER_MASK) { 1097 stats->rx_errors++; 1098 if (berr_reporting) { 1099 cf.can_id |= CAN_ERR_PROT; 1100 cf.data[2] = CAN_ERR_PROT_STUFF; 1101 } 1102 } 1103 1104 /* Check for Form error interrupt */ 1105 if (err_status & XCAN_ESR_FMER_MASK) { 1106 stats->rx_errors++; 1107 if (berr_reporting) { 1108 cf.can_id |= CAN_ERR_PROT; 1109 cf.data[2] = CAN_ERR_PROT_FORM; 1110 } 1111 } 1112 1113 /* Check for CRC error interrupt */ 1114 if (err_status & XCAN_ESR_CRCER_MASK) { 1115 stats->rx_errors++; 1116 if (berr_reporting) { 1117 cf.can_id |= CAN_ERR_PROT; 1118 cf.data[3] = CAN_ERR_PROT_LOC_CRC_SEQ; 1119 } 1120 } 1121 priv->can.can_stats.bus_error++; 1122 } 1123 1124 if (cf.can_id) { 1125 struct can_frame *skb_cf; 1126 struct sk_buff *skb = alloc_can_err_skb(ndev, &skb_cf); 1127 1128 if (skb) { 1129 skb_cf->can_id |= cf.can_id; 1130 memcpy(skb_cf->data, cf.data, CAN_ERR_DLC); 1131 netif_rx(skb); 1132 } 1133 } 1134 1135 netdev_dbg(ndev, "%s: error status register:0x%x\n", 1136 __func__, priv->read_reg(priv, XCAN_ESR_OFFSET)); 1137 } 1138 1139 /** 1140 * xcan_state_interrupt - It will check the state of the CAN device 1141 * @ndev: net_device pointer 1142 * @isr: interrupt status register value 1143 * 1144 * This will checks the state of the CAN device 1145 * and puts the device into appropriate state. 1146 */ 1147 static void xcan_state_interrupt(struct net_device *ndev, u32 isr) 1148 { 1149 struct xcan_priv *priv = netdev_priv(ndev); 1150 1151 /* Check for Sleep interrupt if set put CAN device in sleep state */ 1152 if (isr & XCAN_IXR_SLP_MASK) 1153 priv->can.state = CAN_STATE_SLEEPING; 1154 1155 /* Check for Wake up interrupt if set put CAN device in Active state */ 1156 if (isr & XCAN_IXR_WKUP_MASK) 1157 priv->can.state = CAN_STATE_ERROR_ACTIVE; 1158 } 1159 1160 /** 1161 * xcan_rx_fifo_get_next_frame - Get register offset of next RX frame 1162 * @priv: Driver private data structure 1163 * 1164 * Return: Register offset of the next frame in RX FIFO. 1165 */ 1166 static int xcan_rx_fifo_get_next_frame(struct xcan_priv *priv) 1167 { 1168 int offset; 1169 1170 if (priv->devtype.flags & XCAN_FLAG_RX_FIFO_MULTI) { 1171 u32 fsr, mask; 1172 1173 /* clear RXOK before the is-empty check so that any newly 1174 * received frame will reassert it without a race 1175 */ 1176 priv->write_reg(priv, XCAN_ICR_OFFSET, XCAN_IXR_RXOK_MASK); 1177 1178 fsr = priv->read_reg(priv, XCAN_FSR_OFFSET); 1179 1180 /* check if RX FIFO is empty */ 1181 if (priv->devtype.flags & XCAN_FLAG_CANFD_2) 1182 mask = XCAN_2_FSR_FL_MASK; 1183 else 1184 mask = XCAN_FSR_FL_MASK; 1185 1186 if (!(fsr & mask)) 1187 return -ENOENT; 1188 1189 if (priv->devtype.flags & XCAN_FLAG_CANFD_2) 1190 offset = 1191 XCAN_RXMSG_2_FRAME_OFFSET(fsr & XCAN_2_FSR_RI_MASK); 1192 else 1193 offset = 1194 XCAN_RXMSG_FRAME_OFFSET(fsr & XCAN_FSR_RI_MASK); 1195 1196 } else { 1197 /* check if RX FIFO is empty */ 1198 if (!(priv->read_reg(priv, XCAN_ISR_OFFSET) & 1199 XCAN_IXR_RXNEMP_MASK)) 1200 return -ENOENT; 1201 1202 /* frames are read from a static offset */ 1203 offset = XCAN_RXFIFO_OFFSET; 1204 } 1205 1206 return offset; 1207 } 1208 1209 /** 1210 * xcan_rx_poll - Poll routine for rx packets (NAPI) 1211 * @napi: napi structure pointer 1212 * @quota: Max number of rx packets to be processed. 1213 * 1214 * This is the poll routine for rx part. 1215 * It will process the packets maximux quota value. 1216 * 1217 * Return: number of packets received 1218 */ 1219 static int xcan_rx_poll(struct napi_struct *napi, int quota) 1220 { 1221 struct net_device *ndev = napi->dev; 1222 struct xcan_priv *priv = netdev_priv(ndev); 1223 u32 ier; 1224 int work_done = 0; 1225 int frame_offset; 1226 1227 while ((frame_offset = xcan_rx_fifo_get_next_frame(priv)) >= 0 && 1228 (work_done < quota)) { 1229 if (xcan_rx_int_mask(priv) & XCAN_IXR_RXOK_MASK) 1230 work_done += xcanfd_rx(ndev, frame_offset); 1231 else 1232 work_done += xcan_rx(ndev, frame_offset); 1233 1234 if (priv->devtype.flags & XCAN_FLAG_RX_FIFO_MULTI) 1235 /* increment read index */ 1236 priv->write_reg(priv, XCAN_FSR_OFFSET, 1237 XCAN_FSR_IRI_MASK); 1238 else 1239 /* clear rx-not-empty (will actually clear only if 1240 * empty) 1241 */ 1242 priv->write_reg(priv, XCAN_ICR_OFFSET, 1243 XCAN_IXR_RXNEMP_MASK); 1244 } 1245 1246 if (work_done) 1247 xcan_update_error_state_after_rxtx(ndev); 1248 1249 if (work_done < quota) { 1250 if (napi_complete_done(napi, work_done)) { 1251 ier = priv->read_reg(priv, XCAN_IER_OFFSET); 1252 ier |= xcan_rx_int_mask(priv); 1253 priv->write_reg(priv, XCAN_IER_OFFSET, ier); 1254 } 1255 } 1256 return work_done; 1257 } 1258 1259 /** 1260 * xcan_tx_interrupt - Tx Done Isr 1261 * @ndev: net_device pointer 1262 * @isr: Interrupt status register value 1263 */ 1264 static void xcan_tx_interrupt(struct net_device *ndev, u32 isr) 1265 { 1266 struct xcan_priv *priv = netdev_priv(ndev); 1267 struct net_device_stats *stats = &ndev->stats; 1268 unsigned int frames_in_fifo; 1269 int frames_sent = 1; /* TXOK => at least 1 frame was sent */ 1270 unsigned long flags; 1271 int retries = 0; 1272 1273 /* Synchronize with xmit as we need to know the exact number 1274 * of frames in the FIFO to stay in sync due to the TXFEMP 1275 * handling. 1276 * This also prevents a race between netif_wake_queue() and 1277 * netif_stop_queue(). 1278 */ 1279 spin_lock_irqsave(&priv->tx_lock, flags); 1280 1281 frames_in_fifo = priv->tx_head - priv->tx_tail; 1282 1283 if (WARN_ON_ONCE(frames_in_fifo == 0)) { 1284 /* clear TXOK anyway to avoid getting back here */ 1285 priv->write_reg(priv, XCAN_ICR_OFFSET, XCAN_IXR_TXOK_MASK); 1286 spin_unlock_irqrestore(&priv->tx_lock, flags); 1287 return; 1288 } 1289 1290 /* Check if 2 frames were sent (TXOK only means that at least 1 1291 * frame was sent). 1292 */ 1293 if (frames_in_fifo > 1) { 1294 WARN_ON(frames_in_fifo > priv->tx_max); 1295 1296 /* Synchronize TXOK and isr so that after the loop: 1297 * (1) isr variable is up-to-date at least up to TXOK clear 1298 * time. This avoids us clearing a TXOK of a second frame 1299 * but not noticing that the FIFO is now empty and thus 1300 * marking only a single frame as sent. 1301 * (2) No TXOK is left. Having one could mean leaving a 1302 * stray TXOK as we might process the associated frame 1303 * via TXFEMP handling as we read TXFEMP *after* TXOK 1304 * clear to satisfy (1). 1305 */ 1306 while ((isr & XCAN_IXR_TXOK_MASK) && 1307 !WARN_ON(++retries == 100)) { 1308 priv->write_reg(priv, XCAN_ICR_OFFSET, 1309 XCAN_IXR_TXOK_MASK); 1310 isr = priv->read_reg(priv, XCAN_ISR_OFFSET); 1311 } 1312 1313 if (isr & XCAN_IXR_TXFEMP_MASK) { 1314 /* nothing in FIFO anymore */ 1315 frames_sent = frames_in_fifo; 1316 } 1317 } else { 1318 /* single frame in fifo, just clear TXOK */ 1319 priv->write_reg(priv, XCAN_ICR_OFFSET, XCAN_IXR_TXOK_MASK); 1320 } 1321 1322 while (frames_sent--) { 1323 stats->tx_bytes += can_get_echo_skb(ndev, priv->tx_tail % 1324 priv->tx_max, NULL); 1325 priv->tx_tail++; 1326 stats->tx_packets++; 1327 } 1328 1329 netif_wake_queue(ndev); 1330 1331 spin_unlock_irqrestore(&priv->tx_lock, flags); 1332 1333 xcan_update_error_state_after_rxtx(ndev); 1334 } 1335 1336 /** 1337 * xcan_interrupt - CAN Isr 1338 * @irq: irq number 1339 * @dev_id: device id pointer 1340 * 1341 * This is the xilinx CAN Isr. It checks for the type of interrupt 1342 * and invokes the corresponding ISR. 1343 * 1344 * Return: 1345 * IRQ_NONE - If CAN device is in sleep mode, IRQ_HANDLED otherwise 1346 */ 1347 static irqreturn_t xcan_interrupt(int irq, void *dev_id) 1348 { 1349 struct net_device *ndev = (struct net_device *)dev_id; 1350 struct xcan_priv *priv = netdev_priv(ndev); 1351 u32 isr, ier; 1352 u32 isr_errors; 1353 u32 rx_int_mask = xcan_rx_int_mask(priv); 1354 1355 /* Get the interrupt status from Xilinx CAN */ 1356 isr = priv->read_reg(priv, XCAN_ISR_OFFSET); 1357 if (!isr) 1358 return IRQ_NONE; 1359 1360 /* Check for the type of interrupt and Processing it */ 1361 if (isr & (XCAN_IXR_SLP_MASK | XCAN_IXR_WKUP_MASK)) { 1362 priv->write_reg(priv, XCAN_ICR_OFFSET, (XCAN_IXR_SLP_MASK | 1363 XCAN_IXR_WKUP_MASK)); 1364 xcan_state_interrupt(ndev, isr); 1365 } 1366 1367 /* Check for Tx interrupt and Processing it */ 1368 if (isr & XCAN_IXR_TXOK_MASK) 1369 xcan_tx_interrupt(ndev, isr); 1370 1371 /* Check for the type of error interrupt and Processing it */ 1372 isr_errors = isr & (XCAN_IXR_ERROR_MASK | XCAN_IXR_RXOFLW_MASK | 1373 XCAN_IXR_BSOFF_MASK | XCAN_IXR_ARBLST_MASK | 1374 XCAN_IXR_RXMNF_MASK); 1375 if (isr_errors) { 1376 priv->write_reg(priv, XCAN_ICR_OFFSET, isr_errors); 1377 xcan_err_interrupt(ndev, isr); 1378 } 1379 1380 /* Check for the type of receive interrupt and Processing it */ 1381 if (isr & rx_int_mask) { 1382 ier = priv->read_reg(priv, XCAN_IER_OFFSET); 1383 ier &= ~rx_int_mask; 1384 priv->write_reg(priv, XCAN_IER_OFFSET, ier); 1385 napi_schedule(&priv->napi); 1386 } 1387 return IRQ_HANDLED; 1388 } 1389 1390 /** 1391 * xcan_chip_stop - Driver stop routine 1392 * @ndev: Pointer to net_device structure 1393 * 1394 * This is the drivers stop routine. It will disable the 1395 * interrupts and put the device into configuration mode. 1396 */ 1397 static void xcan_chip_stop(struct net_device *ndev) 1398 { 1399 struct xcan_priv *priv = netdev_priv(ndev); 1400 int ret; 1401 1402 /* Disable interrupts and leave the can in configuration mode */ 1403 ret = set_reset_mode(ndev); 1404 if (ret < 0) 1405 netdev_dbg(ndev, "set_reset_mode() Failed\n"); 1406 1407 priv->can.state = CAN_STATE_STOPPED; 1408 } 1409 1410 /** 1411 * xcan_open - Driver open routine 1412 * @ndev: Pointer to net_device structure 1413 * 1414 * This is the driver open routine. 1415 * Return: 0 on success and failure value on error 1416 */ 1417 static int xcan_open(struct net_device *ndev) 1418 { 1419 struct xcan_priv *priv = netdev_priv(ndev); 1420 int ret; 1421 1422 ret = pm_runtime_get_sync(priv->dev); 1423 if (ret < 0) { 1424 netdev_err(ndev, "%s: pm_runtime_get failed(%d)\n", 1425 __func__, ret); 1426 goto err; 1427 } 1428 1429 ret = request_irq(ndev->irq, xcan_interrupt, priv->irq_flags, 1430 ndev->name, ndev); 1431 if (ret < 0) { 1432 netdev_err(ndev, "irq allocation for CAN failed\n"); 1433 goto err; 1434 } 1435 1436 /* Set chip into reset mode */ 1437 ret = set_reset_mode(ndev); 1438 if (ret < 0) { 1439 netdev_err(ndev, "mode resetting failed!\n"); 1440 goto err_irq; 1441 } 1442 1443 /* Common open */ 1444 ret = open_candev(ndev); 1445 if (ret) 1446 goto err_irq; 1447 1448 ret = xcan_chip_start(ndev); 1449 if (ret < 0) { 1450 netdev_err(ndev, "xcan_chip_start failed!\n"); 1451 goto err_candev; 1452 } 1453 1454 napi_enable(&priv->napi); 1455 netif_start_queue(ndev); 1456 1457 return 0; 1458 1459 err_candev: 1460 close_candev(ndev); 1461 err_irq: 1462 free_irq(ndev->irq, ndev); 1463 err: 1464 pm_runtime_put(priv->dev); 1465 1466 return ret; 1467 } 1468 1469 /** 1470 * xcan_close - Driver close routine 1471 * @ndev: Pointer to net_device structure 1472 * 1473 * Return: 0 always 1474 */ 1475 static int xcan_close(struct net_device *ndev) 1476 { 1477 struct xcan_priv *priv = netdev_priv(ndev); 1478 1479 netif_stop_queue(ndev); 1480 napi_disable(&priv->napi); 1481 xcan_chip_stop(ndev); 1482 free_irq(ndev->irq, ndev); 1483 close_candev(ndev); 1484 1485 pm_runtime_put(priv->dev); 1486 1487 return 0; 1488 } 1489 1490 /** 1491 * xcan_get_berr_counter - error counter routine 1492 * @ndev: Pointer to net_device structure 1493 * @bec: Pointer to can_berr_counter structure 1494 * 1495 * This is the driver error counter routine. 1496 * Return: 0 on success and failure value on error 1497 */ 1498 static int xcan_get_berr_counter(const struct net_device *ndev, 1499 struct can_berr_counter *bec) 1500 { 1501 struct xcan_priv *priv = netdev_priv(ndev); 1502 int ret; 1503 1504 ret = pm_runtime_get_sync(priv->dev); 1505 if (ret < 0) { 1506 netdev_err(ndev, "%s: pm_runtime_get failed(%d)\n", 1507 __func__, ret); 1508 pm_runtime_put(priv->dev); 1509 return ret; 1510 } 1511 1512 bec->txerr = priv->read_reg(priv, XCAN_ECR_OFFSET) & XCAN_ECR_TEC_MASK; 1513 bec->rxerr = ((priv->read_reg(priv, XCAN_ECR_OFFSET) & 1514 XCAN_ECR_REC_MASK) >> XCAN_ESR_REC_SHIFT); 1515 1516 pm_runtime_put(priv->dev); 1517 1518 return 0; 1519 } 1520 1521 /** 1522 * xcan_get_auto_tdcv - Get Transmitter Delay Compensation Value 1523 * @ndev: Pointer to net_device structure 1524 * @tdcv: Pointer to TDCV value 1525 * 1526 * Return: 0 on success 1527 */ 1528 static int xcan_get_auto_tdcv(const struct net_device *ndev, u32 *tdcv) 1529 { 1530 struct xcan_priv *priv = netdev_priv(ndev); 1531 1532 *tdcv = FIELD_GET(XCAN_SR_TDCV_MASK, priv->read_reg(priv, XCAN_SR_OFFSET)); 1533 1534 return 0; 1535 } 1536 1537 static const struct net_device_ops xcan_netdev_ops = { 1538 .ndo_open = xcan_open, 1539 .ndo_stop = xcan_close, 1540 .ndo_start_xmit = xcan_start_xmit, 1541 .ndo_change_mtu = can_change_mtu, 1542 }; 1543 1544 static const struct ethtool_ops xcan_ethtool_ops = { 1545 .get_ts_info = ethtool_op_get_ts_info, 1546 }; 1547 1548 /** 1549 * xcan_suspend - Suspend method for the driver 1550 * @dev: Address of the device structure 1551 * 1552 * Put the driver into low power mode. 1553 * Return: 0 on success and failure value on error 1554 */ 1555 static int __maybe_unused xcan_suspend(struct device *dev) 1556 { 1557 struct net_device *ndev = dev_get_drvdata(dev); 1558 1559 if (netif_running(ndev)) { 1560 netif_stop_queue(ndev); 1561 netif_device_detach(ndev); 1562 xcan_chip_stop(ndev); 1563 } 1564 1565 return pm_runtime_force_suspend(dev); 1566 } 1567 1568 /** 1569 * xcan_resume - Resume from suspend 1570 * @dev: Address of the device structure 1571 * 1572 * Resume operation after suspend. 1573 * Return: 0 on success and failure value on error 1574 */ 1575 static int __maybe_unused xcan_resume(struct device *dev) 1576 { 1577 struct net_device *ndev = dev_get_drvdata(dev); 1578 int ret; 1579 1580 ret = pm_runtime_force_resume(dev); 1581 if (ret) { 1582 dev_err(dev, "pm_runtime_force_resume failed on resume\n"); 1583 return ret; 1584 } 1585 1586 if (netif_running(ndev)) { 1587 ret = xcan_chip_start(ndev); 1588 if (ret) { 1589 dev_err(dev, "xcan_chip_start failed on resume\n"); 1590 return ret; 1591 } 1592 1593 netif_device_attach(ndev); 1594 netif_start_queue(ndev); 1595 } 1596 1597 return 0; 1598 } 1599 1600 /** 1601 * xcan_runtime_suspend - Runtime suspend method for the driver 1602 * @dev: Address of the device structure 1603 * 1604 * Put the driver into low power mode. 1605 * Return: 0 always 1606 */ 1607 static int __maybe_unused xcan_runtime_suspend(struct device *dev) 1608 { 1609 struct net_device *ndev = dev_get_drvdata(dev); 1610 struct xcan_priv *priv = netdev_priv(ndev); 1611 1612 clk_disable_unprepare(priv->bus_clk); 1613 clk_disable_unprepare(priv->can_clk); 1614 1615 return 0; 1616 } 1617 1618 /** 1619 * xcan_runtime_resume - Runtime resume from suspend 1620 * @dev: Address of the device structure 1621 * 1622 * Resume operation after suspend. 1623 * Return: 0 on success and failure value on error 1624 */ 1625 static int __maybe_unused xcan_runtime_resume(struct device *dev) 1626 { 1627 struct net_device *ndev = dev_get_drvdata(dev); 1628 struct xcan_priv *priv = netdev_priv(ndev); 1629 int ret; 1630 1631 ret = clk_prepare_enable(priv->bus_clk); 1632 if (ret) { 1633 dev_err(dev, "Cannot enable clock.\n"); 1634 return ret; 1635 } 1636 ret = clk_prepare_enable(priv->can_clk); 1637 if (ret) { 1638 dev_err(dev, "Cannot enable clock.\n"); 1639 clk_disable_unprepare(priv->bus_clk); 1640 return ret; 1641 } 1642 1643 return 0; 1644 } 1645 1646 static const struct dev_pm_ops xcan_dev_pm_ops = { 1647 SET_SYSTEM_SLEEP_PM_OPS(xcan_suspend, xcan_resume) 1648 SET_RUNTIME_PM_OPS(xcan_runtime_suspend, xcan_runtime_resume, NULL) 1649 }; 1650 1651 static const struct xcan_devtype_data xcan_zynq_data = { 1652 .cantype = XZYNQ_CANPS, 1653 .flags = XCAN_FLAG_TXFEMP, 1654 .bittiming_const = &xcan_bittiming_const, 1655 .btr_ts2_shift = XCAN_BTR_TS2_SHIFT, 1656 .btr_sjw_shift = XCAN_BTR_SJW_SHIFT, 1657 .bus_clk_name = "pclk", 1658 }; 1659 1660 static const struct xcan_devtype_data xcan_axi_data = { 1661 .cantype = XAXI_CAN, 1662 .bittiming_const = &xcan_bittiming_const, 1663 .btr_ts2_shift = XCAN_BTR_TS2_SHIFT, 1664 .btr_sjw_shift = XCAN_BTR_SJW_SHIFT, 1665 .bus_clk_name = "s_axi_aclk", 1666 }; 1667 1668 static const struct xcan_devtype_data xcan_canfd_data = { 1669 .cantype = XAXI_CANFD, 1670 .flags = XCAN_FLAG_EXT_FILTERS | 1671 XCAN_FLAG_RXMNF | 1672 XCAN_FLAG_TX_MAILBOXES | 1673 XCAN_FLAG_RX_FIFO_MULTI, 1674 .bittiming_const = &xcan_bittiming_const_canfd, 1675 .btr_ts2_shift = XCAN_BTR_TS2_SHIFT_CANFD, 1676 .btr_sjw_shift = XCAN_BTR_SJW_SHIFT_CANFD, 1677 .bus_clk_name = "s_axi_aclk", 1678 }; 1679 1680 static const struct xcan_devtype_data xcan_canfd2_data = { 1681 .cantype = XAXI_CANFD_2_0, 1682 .flags = XCAN_FLAG_EXT_FILTERS | 1683 XCAN_FLAG_RXMNF | 1684 XCAN_FLAG_TX_MAILBOXES | 1685 XCAN_FLAG_CANFD_2 | 1686 XCAN_FLAG_RX_FIFO_MULTI, 1687 .bittiming_const = &xcan_bittiming_const_canfd2, 1688 .btr_ts2_shift = XCAN_BTR_TS2_SHIFT_CANFD, 1689 .btr_sjw_shift = XCAN_BTR_SJW_SHIFT_CANFD, 1690 .bus_clk_name = "s_axi_aclk", 1691 }; 1692 1693 /* Match table for OF platform binding */ 1694 static const struct of_device_id xcan_of_match[] = { 1695 { .compatible = "xlnx,zynq-can-1.0", .data = &xcan_zynq_data }, 1696 { .compatible = "xlnx,axi-can-1.00.a", .data = &xcan_axi_data }, 1697 { .compatible = "xlnx,canfd-1.0", .data = &xcan_canfd_data }, 1698 { .compatible = "xlnx,canfd-2.0", .data = &xcan_canfd2_data }, 1699 { /* end of list */ }, 1700 }; 1701 MODULE_DEVICE_TABLE(of, xcan_of_match); 1702 1703 /** 1704 * xcan_probe - Platform registration call 1705 * @pdev: Handle to the platform device structure 1706 * 1707 * This function does all the memory allocation and registration for the CAN 1708 * device. 1709 * 1710 * Return: 0 on success and failure value on error 1711 */ 1712 static int xcan_probe(struct platform_device *pdev) 1713 { 1714 struct net_device *ndev; 1715 struct xcan_priv *priv; 1716 const struct of_device_id *of_id; 1717 const struct xcan_devtype_data *devtype = &xcan_axi_data; 1718 void __iomem *addr; 1719 int ret; 1720 int rx_max, tx_max; 1721 u32 hw_tx_max = 0, hw_rx_max = 0; 1722 const char *hw_tx_max_property; 1723 1724 /* Get the virtual base address for the device */ 1725 addr = devm_platform_ioremap_resource(pdev, 0); 1726 if (IS_ERR(addr)) { 1727 ret = PTR_ERR(addr); 1728 goto err; 1729 } 1730 1731 of_id = of_match_device(xcan_of_match, &pdev->dev); 1732 if (of_id && of_id->data) 1733 devtype = of_id->data; 1734 1735 hw_tx_max_property = devtype->flags & XCAN_FLAG_TX_MAILBOXES ? 1736 "tx-mailbox-count" : "tx-fifo-depth"; 1737 1738 ret = of_property_read_u32(pdev->dev.of_node, hw_tx_max_property, 1739 &hw_tx_max); 1740 if (ret < 0) { 1741 dev_err(&pdev->dev, "missing %s property\n", 1742 hw_tx_max_property); 1743 goto err; 1744 } 1745 1746 ret = of_property_read_u32(pdev->dev.of_node, "rx-fifo-depth", 1747 &hw_rx_max); 1748 if (ret < 0) { 1749 dev_err(&pdev->dev, 1750 "missing rx-fifo-depth property (mailbox mode is not supported)\n"); 1751 goto err; 1752 } 1753 1754 /* With TX FIFO: 1755 * 1756 * There is no way to directly figure out how many frames have been 1757 * sent when the TXOK interrupt is processed. If TXFEMP 1758 * is supported, we can have 2 frames in the FIFO and use TXFEMP 1759 * to determine if 1 or 2 frames have been sent. 1760 * Theoretically we should be able to use TXFWMEMP to determine up 1761 * to 3 frames, but it seems that after putting a second frame in the 1762 * FIFO, with watermark at 2 frames, it can happen that TXFWMEMP (less 1763 * than 2 frames in FIFO) is set anyway with no TXOK (a frame was 1764 * sent), which is not a sensible state - possibly TXFWMEMP is not 1765 * completely synchronized with the rest of the bits? 1766 * 1767 * With TX mailboxes: 1768 * 1769 * HW sends frames in CAN ID priority order. To preserve FIFO ordering 1770 * we submit frames one at a time. 1771 */ 1772 if (!(devtype->flags & XCAN_FLAG_TX_MAILBOXES) && 1773 (devtype->flags & XCAN_FLAG_TXFEMP)) 1774 tx_max = min(hw_tx_max, 2U); 1775 else 1776 tx_max = 1; 1777 1778 rx_max = hw_rx_max; 1779 1780 /* Create a CAN device instance */ 1781 ndev = alloc_candev(sizeof(struct xcan_priv), tx_max); 1782 if (!ndev) 1783 return -ENOMEM; 1784 1785 priv = netdev_priv(ndev); 1786 priv->dev = &pdev->dev; 1787 priv->can.bittiming_const = devtype->bittiming_const; 1788 priv->can.do_set_mode = xcan_do_set_mode; 1789 priv->can.do_get_berr_counter = xcan_get_berr_counter; 1790 priv->can.ctrlmode_supported = CAN_CTRLMODE_LOOPBACK | 1791 CAN_CTRLMODE_BERR_REPORTING; 1792 1793 if (devtype->cantype == XAXI_CANFD) { 1794 priv->can.data_bittiming_const = 1795 &xcan_data_bittiming_const_canfd; 1796 priv->can.tdc_const = &xcan_tdc_const_canfd; 1797 } 1798 1799 if (devtype->cantype == XAXI_CANFD_2_0) { 1800 priv->can.data_bittiming_const = 1801 &xcan_data_bittiming_const_canfd2; 1802 priv->can.tdc_const = &xcan_tdc_const_canfd2; 1803 } 1804 1805 if (devtype->cantype == XAXI_CANFD || 1806 devtype->cantype == XAXI_CANFD_2_0) { 1807 priv->can.ctrlmode_supported |= CAN_CTRLMODE_FD | 1808 CAN_CTRLMODE_TDC_AUTO; 1809 priv->can.do_get_auto_tdcv = xcan_get_auto_tdcv; 1810 } 1811 1812 priv->reg_base = addr; 1813 priv->tx_max = tx_max; 1814 priv->devtype = *devtype; 1815 spin_lock_init(&priv->tx_lock); 1816 1817 /* Get IRQ for the device */ 1818 ret = platform_get_irq(pdev, 0); 1819 if (ret < 0) 1820 goto err_free; 1821 1822 ndev->irq = ret; 1823 1824 ndev->flags |= IFF_ECHO; /* We support local echo */ 1825 1826 platform_set_drvdata(pdev, ndev); 1827 SET_NETDEV_DEV(ndev, &pdev->dev); 1828 ndev->netdev_ops = &xcan_netdev_ops; 1829 ndev->ethtool_ops = &xcan_ethtool_ops; 1830 1831 /* Getting the CAN can_clk info */ 1832 priv->can_clk = devm_clk_get(&pdev->dev, "can_clk"); 1833 if (IS_ERR(priv->can_clk)) { 1834 ret = dev_err_probe(&pdev->dev, PTR_ERR(priv->can_clk), 1835 "device clock not found\n"); 1836 goto err_free; 1837 } 1838 1839 priv->bus_clk = devm_clk_get(&pdev->dev, devtype->bus_clk_name); 1840 if (IS_ERR(priv->bus_clk)) { 1841 ret = dev_err_probe(&pdev->dev, PTR_ERR(priv->bus_clk), 1842 "bus clock not found\n"); 1843 goto err_free; 1844 } 1845 1846 priv->write_reg = xcan_write_reg_le; 1847 priv->read_reg = xcan_read_reg_le; 1848 1849 pm_runtime_enable(&pdev->dev); 1850 ret = pm_runtime_get_sync(&pdev->dev); 1851 if (ret < 0) { 1852 netdev_err(ndev, "%s: pm_runtime_get failed(%d)\n", 1853 __func__, ret); 1854 goto err_disableclks; 1855 } 1856 1857 if (priv->read_reg(priv, XCAN_SR_OFFSET) != XCAN_SR_CONFIG_MASK) { 1858 priv->write_reg = xcan_write_reg_be; 1859 priv->read_reg = xcan_read_reg_be; 1860 } 1861 1862 priv->can.clock.freq = clk_get_rate(priv->can_clk); 1863 1864 netif_napi_add_weight(ndev, &priv->napi, xcan_rx_poll, rx_max); 1865 1866 ret = register_candev(ndev); 1867 if (ret) { 1868 dev_err(&pdev->dev, "fail to register failed (err=%d)\n", ret); 1869 goto err_disableclks; 1870 } 1871 1872 pm_runtime_put(&pdev->dev); 1873 1874 if (priv->devtype.flags & XCAN_FLAG_CANFD_2) { 1875 priv->write_reg(priv, XCAN_AFR_2_ID_OFFSET, 0x00000000); 1876 priv->write_reg(priv, XCAN_AFR_2_MASK_OFFSET, 0x00000000); 1877 } 1878 1879 netdev_dbg(ndev, "reg_base=0x%p irq=%d clock=%d, tx buffers: actual %d, using %d\n", 1880 priv->reg_base, ndev->irq, priv->can.clock.freq, 1881 hw_tx_max, priv->tx_max); 1882 1883 return 0; 1884 1885 err_disableclks: 1886 pm_runtime_put(priv->dev); 1887 pm_runtime_disable(&pdev->dev); 1888 err_free: 1889 free_candev(ndev); 1890 err: 1891 return ret; 1892 } 1893 1894 /** 1895 * xcan_remove - Unregister the device after releasing the resources 1896 * @pdev: Handle to the platform device structure 1897 * 1898 * This function frees all the resources allocated to the device. 1899 * Return: 0 always 1900 */ 1901 static int xcan_remove(struct platform_device *pdev) 1902 { 1903 struct net_device *ndev = platform_get_drvdata(pdev); 1904 1905 unregister_candev(ndev); 1906 pm_runtime_disable(&pdev->dev); 1907 free_candev(ndev); 1908 1909 return 0; 1910 } 1911 1912 static struct platform_driver xcan_driver = { 1913 .probe = xcan_probe, 1914 .remove = xcan_remove, 1915 .driver = { 1916 .name = DRIVER_NAME, 1917 .pm = &xcan_dev_pm_ops, 1918 .of_match_table = xcan_of_match, 1919 }, 1920 }; 1921 1922 module_platform_driver(xcan_driver); 1923 1924 MODULE_LICENSE("GPL"); 1925 MODULE_AUTHOR("Xilinx Inc"); 1926 MODULE_DESCRIPTION("Xilinx CAN interface"); 1927