1# SPDX-License-Identifier: GPL-2.0-only 2menu "CAN USB interfaces" 3 depends on USB 4 5config CAN_8DEV_USB 6 tristate "8 devices USB2CAN interface" 7 help 8 This driver supports the USB2CAN interface 9 from 8 devices (http://www.8devices.com). 10 11config CAN_EMS_USB 12 tristate "EMS CPC-USB/ARM7 CAN/USB interface" 13 help 14 This driver is for the one channel CPC-USB/ARM7 CAN/USB interface 15 from EMS Dr. Thomas Wuensche (http://www.ems-wuensche.de). 16 17config CAN_ESD_USB2 18 tristate "ESD USB/2 CAN/USB interface" 19 help 20 This driver supports the CAN-USB/2 interface 21 from esd electronic system design gmbh (http://www.esd.eu). 22 23config CAN_GS_USB 24 tristate "Geschwister Schneider UG interfaces" 25 help 26 This driver supports the Geschwister Schneider and bytewerk.org 27 candleLight USB CAN interfaces USB/CAN devices 28 If unsure choose N, 29 choose Y for built in support, 30 M to compile as module (module will be named: gs_usb). 31 32config CAN_KVASER_USB 33 tristate "Kvaser CAN/USB interface" 34 help 35 This driver adds support for Kvaser CAN/USB devices like Kvaser 36 Leaf Light, Kvaser USBcan II and Kvaser Memorator Pro 5xHS. 37 38 The driver provides support for the following devices: 39 - Kvaser Leaf Light 40 - Kvaser Leaf Professional HS 41 - Kvaser Leaf SemiPro HS 42 - Kvaser Leaf Professional LS 43 - Kvaser Leaf Professional SWC 44 - Kvaser Leaf Professional LIN 45 - Kvaser Leaf SemiPro LS 46 - Kvaser Leaf SemiPro SWC 47 - Kvaser Memorator II HS/HS 48 - Kvaser USBcan Professional HS/HS 49 - Kvaser Leaf Light GI 50 - Kvaser Leaf Professional HS (OBD-II connector) 51 - Kvaser Memorator Professional HS/LS 52 - Kvaser Leaf Light "China" 53 - Kvaser BlackBird SemiPro 54 - Kvaser USBcan R 55 - Kvaser Leaf Light v2 56 - Kvaser Mini PCI Express HS 57 - Kvaser Mini PCI Express 2xHS 58 - Kvaser USBcan Light 2xHS 59 - Kvaser USBcan II HS/HS 60 - Kvaser USBcan II HS/LS 61 - Kvaser USBcan Rugged ("USBcan Rev B") 62 - Kvaser Memorator HS/HS 63 - Kvaser Memorator HS/LS 64 - Scania VCI2 (if you have the Kvaser logo on top) 65 - Kvaser BlackBird v2 66 - Kvaser Leaf Pro HS v2 67 - Kvaser Hybrid 2xCAN/LIN 68 - Kvaser Hybrid Pro 2xCAN/LIN 69 - Kvaser Memorator 2xHS v2 70 - Kvaser Memorator Pro 2xHS v2 71 - Kvaser Memorator Pro 5xHS 72 - Kvaser USBcan Light 4xHS 73 - Kvaser USBcan Pro 2xHS v2 74 - Kvaser USBcan Pro 5xHS 75 - ATI Memorator Pro 2xHS v2 76 - ATI USBcan Pro 2xHS v2 77 78 If unsure, say N. 79 80 To compile this driver as a module, choose M here: the 81 module will be called kvaser_usb. 82 83config CAN_MCBA_USB 84 tristate "Microchip CAN BUS Analyzer interface" 85 help 86 This driver supports the CAN BUS Analyzer interface 87 from Microchip (http://www.microchip.com/development-tools/). 88 89config CAN_PEAK_USB 90 tristate "PEAK PCAN-USB/USB Pro interfaces for CAN 2.0b/CAN-FD" 91 help 92 This driver supports the PEAK-System Technik USB adapters that enable 93 access to the CAN bus, with repect to the CAN 2.0b and/or CAN-FD 94 standards, that is: 95 96 PCAN-USB single CAN 2.0b channel USB adapter 97 PCAN-USB Pro dual CAN 2.0b channels USB adapter 98 PCAN-USB FD single CAN-FD channel USB adapter 99 PCAN-USB Pro FD dual CAN-FD channels USB adapter 100 PCAN-Chip USB CAN-FD to USB stamp module 101 PCAN-USB X6 6 CAN-FD channels USB adapter 102 103 (see also http://www.peak-system.com). 104 105config CAN_UCAN 106 tristate "Theobroma Systems UCAN interface" 107 help 108 This driver supports the Theobroma Systems 109 UCAN USB-CAN interface. 110 111 The UCAN driver supports the microcontroller-based USB/CAN 112 adapters from Theobroma Systems. There are two form-factors 113 that run essentially the same firmware: 114 115 * Seal: standalone USB stick 116 https://www.theobroma-systems.com/seal) 117 * Mule: integrated on the PCB of various System-on-Modules 118 from Theobroma Systems like the A31-µQ7 and the RK3399-Q7 119 (https://www.theobroma-systems.com/rk3399-q7) 120 121endmenu 122