1 // SPDX-License-Identifier: GPL-2.0-only 2 /* CAN bus driver for Microchip 251x/25625 CAN Controller with SPI Interface 3 * 4 * MCP2510 support and bug fixes by Christian Pellegrin 5 * <chripell@evolware.org> 6 * 7 * Copyright 2009 Christian Pellegrin EVOL S.r.l. 8 * 9 * Copyright 2007 Raymarine UK, Ltd. All Rights Reserved. 10 * Written under contract by: 11 * Chris Elston, Katalix Systems, Ltd. 12 * 13 * Based on Microchip MCP251x CAN controller driver written by 14 * David Vrabel, Copyright 2006 Arcom Control Systems Ltd. 15 * 16 * Based on CAN bus driver for the CCAN controller written by 17 * - Sascha Hauer, Marc Kleine-Budde, Pengutronix 18 * - Simon Kallweit, intefo AG 19 * Copyright 2007 20 */ 21 22 #include <linux/bitfield.h> 23 #include <linux/can/core.h> 24 #include <linux/can/dev.h> 25 #include <linux/can/led.h> 26 #include <linux/clk.h> 27 #include <linux/completion.h> 28 #include <linux/delay.h> 29 #include <linux/device.h> 30 #include <linux/freezer.h> 31 #include <linux/gpio.h> 32 #include <linux/gpio/driver.h> 33 #include <linux/interrupt.h> 34 #include <linux/io.h> 35 #include <linux/iopoll.h> 36 #include <linux/kernel.h> 37 #include <linux/module.h> 38 #include <linux/netdevice.h> 39 #include <linux/platform_device.h> 40 #include <linux/property.h> 41 #include <linux/regulator/consumer.h> 42 #include <linux/slab.h> 43 #include <linux/spi/spi.h> 44 #include <linux/uaccess.h> 45 46 /* SPI interface instruction set */ 47 #define INSTRUCTION_WRITE 0x02 48 #define INSTRUCTION_READ 0x03 49 #define INSTRUCTION_BIT_MODIFY 0x05 50 #define INSTRUCTION_LOAD_TXB(n) (0x40 + 2 * (n)) 51 #define INSTRUCTION_READ_RXB(n) (((n) == 0) ? 0x90 : 0x94) 52 #define INSTRUCTION_RESET 0xC0 53 #define RTS_TXB0 0x01 54 #define RTS_TXB1 0x02 55 #define RTS_TXB2 0x04 56 #define INSTRUCTION_RTS(n) (0x80 | ((n) & 0x07)) 57 58 /* MPC251x registers */ 59 #define BFPCTRL 0x0c 60 # define BFPCTRL_B0BFM BIT(0) 61 # define BFPCTRL_B1BFM BIT(1) 62 # define BFPCTRL_BFM(n) (BFPCTRL_B0BFM << (n)) 63 # define BFPCTRL_BFM_MASK GENMASK(1, 0) 64 # define BFPCTRL_B0BFE BIT(2) 65 # define BFPCTRL_B1BFE BIT(3) 66 # define BFPCTRL_BFE(n) (BFPCTRL_B0BFE << (n)) 67 # define BFPCTRL_BFE_MASK GENMASK(3, 2) 68 # define BFPCTRL_B0BFS BIT(4) 69 # define BFPCTRL_B1BFS BIT(5) 70 # define BFPCTRL_BFS(n) (BFPCTRL_B0BFS << (n)) 71 # define BFPCTRL_BFS_MASK GENMASK(5, 4) 72 #define TXRTSCTRL 0x0d 73 # define TXRTSCTRL_B0RTSM BIT(0) 74 # define TXRTSCTRL_B1RTSM BIT(1) 75 # define TXRTSCTRL_B2RTSM BIT(2) 76 # define TXRTSCTRL_RTSM(n) (TXRTSCTRL_B0RTSM << (n)) 77 # define TXRTSCTRL_RTSM_MASK GENMASK(2, 0) 78 # define TXRTSCTRL_B0RTS BIT(3) 79 # define TXRTSCTRL_B1RTS BIT(4) 80 # define TXRTSCTRL_B2RTS BIT(5) 81 # define TXRTSCTRL_RTS(n) (TXRTSCTRL_B0RTS << (n)) 82 # define TXRTSCTRL_RTS_MASK GENMASK(5, 3) 83 #define CANSTAT 0x0e 84 #define CANCTRL 0x0f 85 # define CANCTRL_REQOP_MASK 0xe0 86 # define CANCTRL_REQOP_CONF 0x80 87 # define CANCTRL_REQOP_LISTEN_ONLY 0x60 88 # define CANCTRL_REQOP_LOOPBACK 0x40 89 # define CANCTRL_REQOP_SLEEP 0x20 90 # define CANCTRL_REQOP_NORMAL 0x00 91 # define CANCTRL_OSM 0x08 92 # define CANCTRL_ABAT 0x10 93 #define TEC 0x1c 94 #define REC 0x1d 95 #define CNF1 0x2a 96 # define CNF1_SJW_SHIFT 6 97 #define CNF2 0x29 98 # define CNF2_BTLMODE 0x80 99 # define CNF2_SAM 0x40 100 # define CNF2_PS1_SHIFT 3 101 #define CNF3 0x28 102 # define CNF3_SOF 0x08 103 # define CNF3_WAKFIL 0x04 104 # define CNF3_PHSEG2_MASK 0x07 105 #define CANINTE 0x2b 106 # define CANINTE_MERRE 0x80 107 # define CANINTE_WAKIE 0x40 108 # define CANINTE_ERRIE 0x20 109 # define CANINTE_TX2IE 0x10 110 # define CANINTE_TX1IE 0x08 111 # define CANINTE_TX0IE 0x04 112 # define CANINTE_RX1IE 0x02 113 # define CANINTE_RX0IE 0x01 114 #define CANINTF 0x2c 115 # define CANINTF_MERRF 0x80 116 # define CANINTF_WAKIF 0x40 117 # define CANINTF_ERRIF 0x20 118 # define CANINTF_TX2IF 0x10 119 # define CANINTF_TX1IF 0x08 120 # define CANINTF_TX0IF 0x04 121 # define CANINTF_RX1IF 0x02 122 # define CANINTF_RX0IF 0x01 123 # define CANINTF_RX (CANINTF_RX0IF | CANINTF_RX1IF) 124 # define CANINTF_TX (CANINTF_TX2IF | CANINTF_TX1IF | CANINTF_TX0IF) 125 # define CANINTF_ERR (CANINTF_ERRIF) 126 #define EFLG 0x2d 127 # define EFLG_EWARN 0x01 128 # define EFLG_RXWAR 0x02 129 # define EFLG_TXWAR 0x04 130 # define EFLG_RXEP 0x08 131 # define EFLG_TXEP 0x10 132 # define EFLG_TXBO 0x20 133 # define EFLG_RX0OVR 0x40 134 # define EFLG_RX1OVR 0x80 135 #define TXBCTRL(n) (((n) * 0x10) + 0x30 + TXBCTRL_OFF) 136 # define TXBCTRL_ABTF 0x40 137 # define TXBCTRL_MLOA 0x20 138 # define TXBCTRL_TXERR 0x10 139 # define TXBCTRL_TXREQ 0x08 140 #define TXBSIDH(n) (((n) * 0x10) + 0x30 + TXBSIDH_OFF) 141 # define SIDH_SHIFT 3 142 #define TXBSIDL(n) (((n) * 0x10) + 0x30 + TXBSIDL_OFF) 143 # define SIDL_SID_MASK 7 144 # define SIDL_SID_SHIFT 5 145 # define SIDL_EXIDE_SHIFT 3 146 # define SIDL_EID_SHIFT 16 147 # define SIDL_EID_MASK 3 148 #define TXBEID8(n) (((n) * 0x10) + 0x30 + TXBEID8_OFF) 149 #define TXBEID0(n) (((n) * 0x10) + 0x30 + TXBEID0_OFF) 150 #define TXBDLC(n) (((n) * 0x10) + 0x30 + TXBDLC_OFF) 151 # define DLC_RTR_SHIFT 6 152 #define TXBCTRL_OFF 0 153 #define TXBSIDH_OFF 1 154 #define TXBSIDL_OFF 2 155 #define TXBEID8_OFF 3 156 #define TXBEID0_OFF 4 157 #define TXBDLC_OFF 5 158 #define TXBDAT_OFF 6 159 #define RXBCTRL(n) (((n) * 0x10) + 0x60 + RXBCTRL_OFF) 160 # define RXBCTRL_BUKT 0x04 161 # define RXBCTRL_RXM0 0x20 162 # define RXBCTRL_RXM1 0x40 163 #define RXBSIDH(n) (((n) * 0x10) + 0x60 + RXBSIDH_OFF) 164 # define RXBSIDH_SHIFT 3 165 #define RXBSIDL(n) (((n) * 0x10) + 0x60 + RXBSIDL_OFF) 166 # define RXBSIDL_IDE 0x08 167 # define RXBSIDL_SRR 0x10 168 # define RXBSIDL_EID 3 169 # define RXBSIDL_SHIFT 5 170 #define RXBEID8(n) (((n) * 0x10) + 0x60 + RXBEID8_OFF) 171 #define RXBEID0(n) (((n) * 0x10) + 0x60 + RXBEID0_OFF) 172 #define RXBDLC(n) (((n) * 0x10) + 0x60 + RXBDLC_OFF) 173 # define RXBDLC_LEN_MASK 0x0f 174 # define RXBDLC_RTR 0x40 175 #define RXBCTRL_OFF 0 176 #define RXBSIDH_OFF 1 177 #define RXBSIDL_OFF 2 178 #define RXBEID8_OFF 3 179 #define RXBEID0_OFF 4 180 #define RXBDLC_OFF 5 181 #define RXBDAT_OFF 6 182 #define RXFSID(n) ((n < 3) ? 0 : 4) 183 #define RXFSIDH(n) ((n) * 4 + RXFSID(n)) 184 #define RXFSIDL(n) ((n) * 4 + 1 + RXFSID(n)) 185 #define RXFEID8(n) ((n) * 4 + 2 + RXFSID(n)) 186 #define RXFEID0(n) ((n) * 4 + 3 + RXFSID(n)) 187 #define RXMSIDH(n) ((n) * 4 + 0x20) 188 #define RXMSIDL(n) ((n) * 4 + 0x21) 189 #define RXMEID8(n) ((n) * 4 + 0x22) 190 #define RXMEID0(n) ((n) * 4 + 0x23) 191 192 #define GET_BYTE(val, byte) \ 193 (((val) >> ((byte) * 8)) & 0xff) 194 #define SET_BYTE(val, byte) \ 195 (((val) & 0xff) << ((byte) * 8)) 196 197 /* Buffer size required for the largest SPI transfer (i.e., reading a 198 * frame) 199 */ 200 #define CAN_FRAME_MAX_DATA_LEN 8 201 #define SPI_TRANSFER_BUF_LEN (6 + CAN_FRAME_MAX_DATA_LEN) 202 #define CAN_FRAME_MAX_BITS 128 203 204 #define TX_ECHO_SKB_MAX 1 205 206 #define MCP251X_OST_DELAY_MS (5) 207 208 #define DEVICE_NAME "mcp251x" 209 210 static const struct can_bittiming_const mcp251x_bittiming_const = { 211 .name = DEVICE_NAME, 212 .tseg1_min = 3, 213 .tseg1_max = 16, 214 .tseg2_min = 2, 215 .tseg2_max = 8, 216 .sjw_max = 4, 217 .brp_min = 1, 218 .brp_max = 64, 219 .brp_inc = 1, 220 }; 221 222 enum mcp251x_model { 223 CAN_MCP251X_MCP2510 = 0x2510, 224 CAN_MCP251X_MCP2515 = 0x2515, 225 CAN_MCP251X_MCP25625 = 0x25625, 226 }; 227 228 struct mcp251x_priv { 229 struct can_priv can; 230 struct net_device *net; 231 struct spi_device *spi; 232 enum mcp251x_model model; 233 234 struct mutex mcp_lock; /* SPI device lock */ 235 236 u8 *spi_tx_buf; 237 u8 *spi_rx_buf; 238 239 struct sk_buff *tx_skb; 240 241 struct workqueue_struct *wq; 242 struct work_struct tx_work; 243 struct work_struct restart_work; 244 245 int force_quit; 246 int after_suspend; 247 #define AFTER_SUSPEND_UP 1 248 #define AFTER_SUSPEND_DOWN 2 249 #define AFTER_SUSPEND_POWER 4 250 #define AFTER_SUSPEND_RESTART 8 251 int restart_tx; 252 bool tx_busy; 253 254 struct regulator *power; 255 struct regulator *transceiver; 256 struct clk *clk; 257 #ifdef CONFIG_GPIOLIB 258 struct gpio_chip gpio; 259 u8 reg_bfpctrl; 260 #endif 261 }; 262 263 #define MCP251X_IS(_model) \ 264 static inline int mcp251x_is_##_model(struct spi_device *spi) \ 265 { \ 266 struct mcp251x_priv *priv = spi_get_drvdata(spi); \ 267 return priv->model == CAN_MCP251X_MCP##_model; \ 268 } 269 270 MCP251X_IS(2510); 271 272 static void mcp251x_clean(struct net_device *net) 273 { 274 struct mcp251x_priv *priv = netdev_priv(net); 275 276 if (priv->tx_skb || priv->tx_busy) 277 net->stats.tx_errors++; 278 dev_kfree_skb(priv->tx_skb); 279 if (priv->tx_busy) 280 can_free_echo_skb(priv->net, 0, NULL); 281 priv->tx_skb = NULL; 282 priv->tx_busy = false; 283 } 284 285 /* Note about handling of error return of mcp251x_spi_trans: accessing 286 * registers via SPI is not really different conceptually than using 287 * normal I/O assembler instructions, although it's much more 288 * complicated from a practical POV. So it's not advisable to always 289 * check the return value of this function. Imagine that every 290 * read{b,l}, write{b,l} and friends would be bracketed in "if ( < 0) 291 * error();", it would be a great mess (well there are some situation 292 * when exception handling C++ like could be useful after all). So we 293 * just check that transfers are OK at the beginning of our 294 * conversation with the chip and to avoid doing really nasty things 295 * (like injecting bogus packets in the network stack). 296 */ 297 static int mcp251x_spi_trans(struct spi_device *spi, int len) 298 { 299 struct mcp251x_priv *priv = spi_get_drvdata(spi); 300 struct spi_transfer t = { 301 .tx_buf = priv->spi_tx_buf, 302 .rx_buf = priv->spi_rx_buf, 303 .len = len, 304 .cs_change = 0, 305 }; 306 struct spi_message m; 307 int ret; 308 309 spi_message_init(&m); 310 spi_message_add_tail(&t, &m); 311 312 ret = spi_sync(spi, &m); 313 if (ret) 314 dev_err(&spi->dev, "spi transfer failed: ret = %d\n", ret); 315 return ret; 316 } 317 318 static int mcp251x_spi_write(struct spi_device *spi, int len) 319 { 320 struct mcp251x_priv *priv = spi_get_drvdata(spi); 321 int ret; 322 323 ret = spi_write(spi, priv->spi_tx_buf, len); 324 if (ret) 325 dev_err(&spi->dev, "spi write failed: ret = %d\n", ret); 326 327 return ret; 328 } 329 330 static u8 mcp251x_read_reg(struct spi_device *spi, u8 reg) 331 { 332 struct mcp251x_priv *priv = spi_get_drvdata(spi); 333 u8 val = 0; 334 335 priv->spi_tx_buf[0] = INSTRUCTION_READ; 336 priv->spi_tx_buf[1] = reg; 337 338 if (spi->controller->flags & SPI_CONTROLLER_HALF_DUPLEX) { 339 spi_write_then_read(spi, priv->spi_tx_buf, 2, &val, 1); 340 } else { 341 mcp251x_spi_trans(spi, 3); 342 val = priv->spi_rx_buf[2]; 343 } 344 345 return val; 346 } 347 348 static void mcp251x_read_2regs(struct spi_device *spi, u8 reg, u8 *v1, u8 *v2) 349 { 350 struct mcp251x_priv *priv = spi_get_drvdata(spi); 351 352 priv->spi_tx_buf[0] = INSTRUCTION_READ; 353 priv->spi_tx_buf[1] = reg; 354 355 if (spi->controller->flags & SPI_CONTROLLER_HALF_DUPLEX) { 356 u8 val[2] = { 0 }; 357 358 spi_write_then_read(spi, priv->spi_tx_buf, 2, val, 2); 359 *v1 = val[0]; 360 *v2 = val[1]; 361 } else { 362 mcp251x_spi_trans(spi, 4); 363 364 *v1 = priv->spi_rx_buf[2]; 365 *v2 = priv->spi_rx_buf[3]; 366 } 367 } 368 369 static void mcp251x_write_reg(struct spi_device *spi, u8 reg, u8 val) 370 { 371 struct mcp251x_priv *priv = spi_get_drvdata(spi); 372 373 priv->spi_tx_buf[0] = INSTRUCTION_WRITE; 374 priv->spi_tx_buf[1] = reg; 375 priv->spi_tx_buf[2] = val; 376 377 mcp251x_spi_write(spi, 3); 378 } 379 380 static void mcp251x_write_2regs(struct spi_device *spi, u8 reg, u8 v1, u8 v2) 381 { 382 struct mcp251x_priv *priv = spi_get_drvdata(spi); 383 384 priv->spi_tx_buf[0] = INSTRUCTION_WRITE; 385 priv->spi_tx_buf[1] = reg; 386 priv->spi_tx_buf[2] = v1; 387 priv->spi_tx_buf[3] = v2; 388 389 mcp251x_spi_write(spi, 4); 390 } 391 392 static void mcp251x_write_bits(struct spi_device *spi, u8 reg, 393 u8 mask, u8 val) 394 { 395 struct mcp251x_priv *priv = spi_get_drvdata(spi); 396 397 priv->spi_tx_buf[0] = INSTRUCTION_BIT_MODIFY; 398 priv->spi_tx_buf[1] = reg; 399 priv->spi_tx_buf[2] = mask; 400 priv->spi_tx_buf[3] = val; 401 402 mcp251x_spi_write(spi, 4); 403 } 404 405 static u8 mcp251x_read_stat(struct spi_device *spi) 406 { 407 return mcp251x_read_reg(spi, CANSTAT) & CANCTRL_REQOP_MASK; 408 } 409 410 #define mcp251x_read_stat_poll_timeout(addr, val, cond, delay_us, timeout_us) \ 411 readx_poll_timeout(mcp251x_read_stat, addr, val, cond, \ 412 delay_us, timeout_us) 413 414 #ifdef CONFIG_GPIOLIB 415 enum { 416 MCP251X_GPIO_TX0RTS = 0, /* inputs */ 417 MCP251X_GPIO_TX1RTS, 418 MCP251X_GPIO_TX2RTS, 419 MCP251X_GPIO_RX0BF, /* outputs */ 420 MCP251X_GPIO_RX1BF, 421 }; 422 423 #define MCP251X_GPIO_INPUT_MASK \ 424 GENMASK(MCP251X_GPIO_TX2RTS, MCP251X_GPIO_TX0RTS) 425 #define MCP251X_GPIO_OUTPUT_MASK \ 426 GENMASK(MCP251X_GPIO_RX1BF, MCP251X_GPIO_RX0BF) 427 428 static const char * const mcp251x_gpio_names[] = { 429 [MCP251X_GPIO_TX0RTS] = "TX0RTS", /* inputs */ 430 [MCP251X_GPIO_TX1RTS] = "TX1RTS", 431 [MCP251X_GPIO_TX2RTS] = "TX2RTS", 432 [MCP251X_GPIO_RX0BF] = "RX0BF", /* outputs */ 433 [MCP251X_GPIO_RX1BF] = "RX1BF", 434 }; 435 436 static inline bool mcp251x_gpio_is_input(unsigned int offset) 437 { 438 return offset <= MCP251X_GPIO_TX2RTS; 439 } 440 441 static int mcp251x_gpio_request(struct gpio_chip *chip, 442 unsigned int offset) 443 { 444 struct mcp251x_priv *priv = gpiochip_get_data(chip); 445 u8 val; 446 447 /* nothing to be done for inputs */ 448 if (mcp251x_gpio_is_input(offset)) 449 return 0; 450 451 val = BFPCTRL_BFE(offset - MCP251X_GPIO_RX0BF); 452 453 mutex_lock(&priv->mcp_lock); 454 mcp251x_write_bits(priv->spi, BFPCTRL, val, val); 455 mutex_unlock(&priv->mcp_lock); 456 457 priv->reg_bfpctrl |= val; 458 459 return 0; 460 } 461 462 static void mcp251x_gpio_free(struct gpio_chip *chip, 463 unsigned int offset) 464 { 465 struct mcp251x_priv *priv = gpiochip_get_data(chip); 466 u8 val; 467 468 /* nothing to be done for inputs */ 469 if (mcp251x_gpio_is_input(offset)) 470 return; 471 472 val = BFPCTRL_BFE(offset - MCP251X_GPIO_RX0BF); 473 474 mutex_lock(&priv->mcp_lock); 475 mcp251x_write_bits(priv->spi, BFPCTRL, val, 0); 476 mutex_unlock(&priv->mcp_lock); 477 478 priv->reg_bfpctrl &= ~val; 479 } 480 481 static int mcp251x_gpio_get_direction(struct gpio_chip *chip, 482 unsigned int offset) 483 { 484 if (mcp251x_gpio_is_input(offset)) 485 return GPIOF_DIR_IN; 486 487 return GPIOF_DIR_OUT; 488 } 489 490 static int mcp251x_gpio_get(struct gpio_chip *chip, unsigned int offset) 491 { 492 struct mcp251x_priv *priv = gpiochip_get_data(chip); 493 u8 reg, mask, val; 494 495 if (mcp251x_gpio_is_input(offset)) { 496 reg = TXRTSCTRL; 497 mask = TXRTSCTRL_RTS(offset); 498 } else { 499 reg = BFPCTRL; 500 mask = BFPCTRL_BFS(offset - MCP251X_GPIO_RX0BF); 501 } 502 503 mutex_lock(&priv->mcp_lock); 504 val = mcp251x_read_reg(priv->spi, reg); 505 mutex_unlock(&priv->mcp_lock); 506 507 return !!(val & mask); 508 } 509 510 static int mcp251x_gpio_get_multiple(struct gpio_chip *chip, 511 unsigned long *maskp, unsigned long *bitsp) 512 { 513 struct mcp251x_priv *priv = gpiochip_get_data(chip); 514 unsigned long bits = 0; 515 u8 val; 516 517 mutex_lock(&priv->mcp_lock); 518 if (maskp[0] & MCP251X_GPIO_INPUT_MASK) { 519 val = mcp251x_read_reg(priv->spi, TXRTSCTRL); 520 val = FIELD_GET(TXRTSCTRL_RTS_MASK, val); 521 bits |= FIELD_PREP(MCP251X_GPIO_INPUT_MASK, val); 522 } 523 if (maskp[0] & MCP251X_GPIO_OUTPUT_MASK) { 524 val = mcp251x_read_reg(priv->spi, BFPCTRL); 525 val = FIELD_GET(BFPCTRL_BFS_MASK, val); 526 bits |= FIELD_PREP(MCP251X_GPIO_OUTPUT_MASK, val); 527 } 528 mutex_unlock(&priv->mcp_lock); 529 530 bitsp[0] = bits; 531 return 0; 532 } 533 534 static void mcp251x_gpio_set(struct gpio_chip *chip, unsigned int offset, 535 int value) 536 { 537 struct mcp251x_priv *priv = gpiochip_get_data(chip); 538 u8 mask, val; 539 540 mask = BFPCTRL_BFS(offset - MCP251X_GPIO_RX0BF); 541 val = value ? mask : 0; 542 543 mutex_lock(&priv->mcp_lock); 544 mcp251x_write_bits(priv->spi, BFPCTRL, mask, val); 545 mutex_unlock(&priv->mcp_lock); 546 547 priv->reg_bfpctrl &= ~mask; 548 priv->reg_bfpctrl |= val; 549 } 550 551 static void 552 mcp251x_gpio_set_multiple(struct gpio_chip *chip, 553 unsigned long *maskp, unsigned long *bitsp) 554 { 555 struct mcp251x_priv *priv = gpiochip_get_data(chip); 556 u8 mask, val; 557 558 mask = FIELD_GET(MCP251X_GPIO_OUTPUT_MASK, maskp[0]); 559 mask = FIELD_PREP(BFPCTRL_BFS_MASK, mask); 560 561 val = FIELD_GET(MCP251X_GPIO_OUTPUT_MASK, bitsp[0]); 562 val = FIELD_PREP(BFPCTRL_BFS_MASK, val); 563 564 if (!mask) 565 return; 566 567 mutex_lock(&priv->mcp_lock); 568 mcp251x_write_bits(priv->spi, BFPCTRL, mask, val); 569 mutex_unlock(&priv->mcp_lock); 570 571 priv->reg_bfpctrl &= ~mask; 572 priv->reg_bfpctrl |= val; 573 } 574 575 static void mcp251x_gpio_restore(struct spi_device *spi) 576 { 577 struct mcp251x_priv *priv = spi_get_drvdata(spi); 578 579 mcp251x_write_reg(spi, BFPCTRL, priv->reg_bfpctrl); 580 } 581 582 static int mcp251x_gpio_setup(struct mcp251x_priv *priv) 583 { 584 struct gpio_chip *gpio = &priv->gpio; 585 586 if (!device_property_present(&priv->spi->dev, "gpio-controller")) 587 return 0; 588 589 /* gpiochip handles TX[0..2]RTS and RX[0..1]BF */ 590 gpio->label = priv->spi->modalias; 591 gpio->parent = &priv->spi->dev; 592 gpio->owner = THIS_MODULE; 593 gpio->request = mcp251x_gpio_request; 594 gpio->free = mcp251x_gpio_free; 595 gpio->get_direction = mcp251x_gpio_get_direction; 596 gpio->get = mcp251x_gpio_get; 597 gpio->get_multiple = mcp251x_gpio_get_multiple; 598 gpio->set = mcp251x_gpio_set; 599 gpio->set_multiple = mcp251x_gpio_set_multiple; 600 gpio->base = -1; 601 gpio->ngpio = ARRAY_SIZE(mcp251x_gpio_names); 602 gpio->names = mcp251x_gpio_names; 603 gpio->can_sleep = true; 604 605 return devm_gpiochip_add_data(&priv->spi->dev, gpio, priv); 606 } 607 #else 608 static inline void mcp251x_gpio_restore(struct spi_device *spi) 609 { 610 } 611 612 static inline int mcp251x_gpio_setup(struct mcp251x_priv *priv) 613 { 614 return 0; 615 } 616 #endif 617 618 static void mcp251x_hw_tx_frame(struct spi_device *spi, u8 *buf, 619 int len, int tx_buf_idx) 620 { 621 struct mcp251x_priv *priv = spi_get_drvdata(spi); 622 623 if (mcp251x_is_2510(spi)) { 624 int i; 625 626 for (i = 1; i < TXBDAT_OFF + len; i++) 627 mcp251x_write_reg(spi, TXBCTRL(tx_buf_idx) + i, 628 buf[i]); 629 } else { 630 memcpy(priv->spi_tx_buf, buf, TXBDAT_OFF + len); 631 mcp251x_spi_write(spi, TXBDAT_OFF + len); 632 } 633 } 634 635 static void mcp251x_hw_tx(struct spi_device *spi, struct can_frame *frame, 636 int tx_buf_idx) 637 { 638 struct mcp251x_priv *priv = spi_get_drvdata(spi); 639 u32 sid, eid, exide, rtr; 640 u8 buf[SPI_TRANSFER_BUF_LEN]; 641 642 exide = (frame->can_id & CAN_EFF_FLAG) ? 1 : 0; /* Extended ID Enable */ 643 if (exide) 644 sid = (frame->can_id & CAN_EFF_MASK) >> 18; 645 else 646 sid = frame->can_id & CAN_SFF_MASK; /* Standard ID */ 647 eid = frame->can_id & CAN_EFF_MASK; /* Extended ID */ 648 rtr = (frame->can_id & CAN_RTR_FLAG) ? 1 : 0; /* Remote transmission */ 649 650 buf[TXBCTRL_OFF] = INSTRUCTION_LOAD_TXB(tx_buf_idx); 651 buf[TXBSIDH_OFF] = sid >> SIDH_SHIFT; 652 buf[TXBSIDL_OFF] = ((sid & SIDL_SID_MASK) << SIDL_SID_SHIFT) | 653 (exide << SIDL_EXIDE_SHIFT) | 654 ((eid >> SIDL_EID_SHIFT) & SIDL_EID_MASK); 655 buf[TXBEID8_OFF] = GET_BYTE(eid, 1); 656 buf[TXBEID0_OFF] = GET_BYTE(eid, 0); 657 buf[TXBDLC_OFF] = (rtr << DLC_RTR_SHIFT) | frame->len; 658 memcpy(buf + TXBDAT_OFF, frame->data, frame->len); 659 mcp251x_hw_tx_frame(spi, buf, frame->len, tx_buf_idx); 660 661 /* use INSTRUCTION_RTS, to avoid "repeated frame problem" */ 662 priv->spi_tx_buf[0] = INSTRUCTION_RTS(1 << tx_buf_idx); 663 mcp251x_spi_write(priv->spi, 1); 664 } 665 666 static void mcp251x_hw_rx_frame(struct spi_device *spi, u8 *buf, 667 int buf_idx) 668 { 669 struct mcp251x_priv *priv = spi_get_drvdata(spi); 670 671 if (mcp251x_is_2510(spi)) { 672 int i, len; 673 674 for (i = 1; i < RXBDAT_OFF; i++) 675 buf[i] = mcp251x_read_reg(spi, RXBCTRL(buf_idx) + i); 676 677 len = can_cc_dlc2len(buf[RXBDLC_OFF] & RXBDLC_LEN_MASK); 678 for (; i < (RXBDAT_OFF + len); i++) 679 buf[i] = mcp251x_read_reg(spi, RXBCTRL(buf_idx) + i); 680 } else { 681 priv->spi_tx_buf[RXBCTRL_OFF] = INSTRUCTION_READ_RXB(buf_idx); 682 if (spi->controller->flags & SPI_CONTROLLER_HALF_DUPLEX) { 683 spi_write_then_read(spi, priv->spi_tx_buf, 1, 684 priv->spi_rx_buf, 685 SPI_TRANSFER_BUF_LEN); 686 memcpy(buf + 1, priv->spi_rx_buf, 687 SPI_TRANSFER_BUF_LEN - 1); 688 } else { 689 mcp251x_spi_trans(spi, SPI_TRANSFER_BUF_LEN); 690 memcpy(buf, priv->spi_rx_buf, SPI_TRANSFER_BUF_LEN); 691 } 692 } 693 } 694 695 static void mcp251x_hw_rx(struct spi_device *spi, int buf_idx) 696 { 697 struct mcp251x_priv *priv = spi_get_drvdata(spi); 698 struct sk_buff *skb; 699 struct can_frame *frame; 700 u8 buf[SPI_TRANSFER_BUF_LEN]; 701 702 skb = alloc_can_skb(priv->net, &frame); 703 if (!skb) { 704 dev_err(&spi->dev, "cannot allocate RX skb\n"); 705 priv->net->stats.rx_dropped++; 706 return; 707 } 708 709 mcp251x_hw_rx_frame(spi, buf, buf_idx); 710 if (buf[RXBSIDL_OFF] & RXBSIDL_IDE) { 711 /* Extended ID format */ 712 frame->can_id = CAN_EFF_FLAG; 713 frame->can_id |= 714 /* Extended ID part */ 715 SET_BYTE(buf[RXBSIDL_OFF] & RXBSIDL_EID, 2) | 716 SET_BYTE(buf[RXBEID8_OFF], 1) | 717 SET_BYTE(buf[RXBEID0_OFF], 0) | 718 /* Standard ID part */ 719 (((buf[RXBSIDH_OFF] << RXBSIDH_SHIFT) | 720 (buf[RXBSIDL_OFF] >> RXBSIDL_SHIFT)) << 18); 721 /* Remote transmission request */ 722 if (buf[RXBDLC_OFF] & RXBDLC_RTR) 723 frame->can_id |= CAN_RTR_FLAG; 724 } else { 725 /* Standard ID format */ 726 frame->can_id = 727 (buf[RXBSIDH_OFF] << RXBSIDH_SHIFT) | 728 (buf[RXBSIDL_OFF] >> RXBSIDL_SHIFT); 729 if (buf[RXBSIDL_OFF] & RXBSIDL_SRR) 730 frame->can_id |= CAN_RTR_FLAG; 731 } 732 /* Data length */ 733 frame->len = can_cc_dlc2len(buf[RXBDLC_OFF] & RXBDLC_LEN_MASK); 734 if (!(frame->can_id & CAN_RTR_FLAG)) { 735 memcpy(frame->data, buf + RXBDAT_OFF, frame->len); 736 737 priv->net->stats.rx_bytes += frame->len; 738 } 739 priv->net->stats.rx_packets++; 740 741 can_led_event(priv->net, CAN_LED_EVENT_RX); 742 743 netif_rx(skb); 744 } 745 746 static void mcp251x_hw_sleep(struct spi_device *spi) 747 { 748 mcp251x_write_reg(spi, CANCTRL, CANCTRL_REQOP_SLEEP); 749 } 750 751 /* May only be called when device is sleeping! */ 752 static int mcp251x_hw_wake(struct spi_device *spi) 753 { 754 u8 value; 755 int ret; 756 757 /* Force wakeup interrupt to wake device, but don't execute IST */ 758 disable_irq(spi->irq); 759 mcp251x_write_2regs(spi, CANINTE, CANINTE_WAKIE, CANINTF_WAKIF); 760 761 /* Wait for oscillator startup timer after wake up */ 762 mdelay(MCP251X_OST_DELAY_MS); 763 764 /* Put device into config mode */ 765 mcp251x_write_reg(spi, CANCTRL, CANCTRL_REQOP_CONF); 766 767 /* Wait for the device to enter config mode */ 768 ret = mcp251x_read_stat_poll_timeout(spi, value, value == CANCTRL_REQOP_CONF, 769 MCP251X_OST_DELAY_MS * 1000, 770 USEC_PER_SEC); 771 if (ret) { 772 dev_err(&spi->dev, "MCP251x didn't enter in config mode\n"); 773 return ret; 774 } 775 776 /* Disable and clear pending interrupts */ 777 mcp251x_write_2regs(spi, CANINTE, 0x00, 0x00); 778 enable_irq(spi->irq); 779 780 return 0; 781 } 782 783 static netdev_tx_t mcp251x_hard_start_xmit(struct sk_buff *skb, 784 struct net_device *net) 785 { 786 struct mcp251x_priv *priv = netdev_priv(net); 787 struct spi_device *spi = priv->spi; 788 789 if (priv->tx_skb || priv->tx_busy) { 790 dev_warn(&spi->dev, "hard_xmit called while tx busy\n"); 791 return NETDEV_TX_BUSY; 792 } 793 794 if (can_dropped_invalid_skb(net, skb)) 795 return NETDEV_TX_OK; 796 797 netif_stop_queue(net); 798 priv->tx_skb = skb; 799 queue_work(priv->wq, &priv->tx_work); 800 801 return NETDEV_TX_OK; 802 } 803 804 static int mcp251x_do_set_mode(struct net_device *net, enum can_mode mode) 805 { 806 struct mcp251x_priv *priv = netdev_priv(net); 807 808 switch (mode) { 809 case CAN_MODE_START: 810 mcp251x_clean(net); 811 /* We have to delay work since SPI I/O may sleep */ 812 priv->can.state = CAN_STATE_ERROR_ACTIVE; 813 priv->restart_tx = 1; 814 if (priv->can.restart_ms == 0) 815 priv->after_suspend = AFTER_SUSPEND_RESTART; 816 queue_work(priv->wq, &priv->restart_work); 817 break; 818 default: 819 return -EOPNOTSUPP; 820 } 821 822 return 0; 823 } 824 825 static int mcp251x_set_normal_mode(struct spi_device *spi) 826 { 827 struct mcp251x_priv *priv = spi_get_drvdata(spi); 828 u8 value; 829 int ret; 830 831 /* Enable interrupts */ 832 mcp251x_write_reg(spi, CANINTE, 833 CANINTE_ERRIE | CANINTE_TX2IE | CANINTE_TX1IE | 834 CANINTE_TX0IE | CANINTE_RX1IE | CANINTE_RX0IE); 835 836 if (priv->can.ctrlmode & CAN_CTRLMODE_LOOPBACK) { 837 /* Put device into loopback mode */ 838 mcp251x_write_reg(spi, CANCTRL, CANCTRL_REQOP_LOOPBACK); 839 } else if (priv->can.ctrlmode & CAN_CTRLMODE_LISTENONLY) { 840 /* Put device into listen-only mode */ 841 mcp251x_write_reg(spi, CANCTRL, CANCTRL_REQOP_LISTEN_ONLY); 842 } else { 843 /* Put device into normal mode */ 844 mcp251x_write_reg(spi, CANCTRL, CANCTRL_REQOP_NORMAL); 845 846 /* Wait for the device to enter normal mode */ 847 ret = mcp251x_read_stat_poll_timeout(spi, value, value == 0, 848 MCP251X_OST_DELAY_MS * 1000, 849 USEC_PER_SEC); 850 if (ret) { 851 dev_err(&spi->dev, "MCP251x didn't enter in normal mode\n"); 852 return ret; 853 } 854 } 855 priv->can.state = CAN_STATE_ERROR_ACTIVE; 856 return 0; 857 } 858 859 static int mcp251x_do_set_bittiming(struct net_device *net) 860 { 861 struct mcp251x_priv *priv = netdev_priv(net); 862 struct can_bittiming *bt = &priv->can.bittiming; 863 struct spi_device *spi = priv->spi; 864 865 mcp251x_write_reg(spi, CNF1, ((bt->sjw - 1) << CNF1_SJW_SHIFT) | 866 (bt->brp - 1)); 867 mcp251x_write_reg(spi, CNF2, CNF2_BTLMODE | 868 (priv->can.ctrlmode & CAN_CTRLMODE_3_SAMPLES ? 869 CNF2_SAM : 0) | 870 ((bt->phase_seg1 - 1) << CNF2_PS1_SHIFT) | 871 (bt->prop_seg - 1)); 872 mcp251x_write_bits(spi, CNF3, CNF3_PHSEG2_MASK, 873 (bt->phase_seg2 - 1)); 874 dev_dbg(&spi->dev, "CNF: 0x%02x 0x%02x 0x%02x\n", 875 mcp251x_read_reg(spi, CNF1), 876 mcp251x_read_reg(spi, CNF2), 877 mcp251x_read_reg(spi, CNF3)); 878 879 return 0; 880 } 881 882 static int mcp251x_setup(struct net_device *net, struct spi_device *spi) 883 { 884 mcp251x_do_set_bittiming(net); 885 886 mcp251x_write_reg(spi, RXBCTRL(0), 887 RXBCTRL_BUKT | RXBCTRL_RXM0 | RXBCTRL_RXM1); 888 mcp251x_write_reg(spi, RXBCTRL(1), 889 RXBCTRL_RXM0 | RXBCTRL_RXM1); 890 return 0; 891 } 892 893 static int mcp251x_hw_reset(struct spi_device *spi) 894 { 895 struct mcp251x_priv *priv = spi_get_drvdata(spi); 896 u8 value; 897 int ret; 898 899 /* Wait for oscillator startup timer after power up */ 900 mdelay(MCP251X_OST_DELAY_MS); 901 902 priv->spi_tx_buf[0] = INSTRUCTION_RESET; 903 ret = mcp251x_spi_write(spi, 1); 904 if (ret) 905 return ret; 906 907 /* Wait for oscillator startup timer after reset */ 908 mdelay(MCP251X_OST_DELAY_MS); 909 910 /* Wait for reset to finish */ 911 ret = mcp251x_read_stat_poll_timeout(spi, value, value == CANCTRL_REQOP_CONF, 912 MCP251X_OST_DELAY_MS * 1000, 913 USEC_PER_SEC); 914 if (ret) 915 dev_err(&spi->dev, "MCP251x didn't enter in conf mode after reset\n"); 916 return ret; 917 } 918 919 static int mcp251x_hw_probe(struct spi_device *spi) 920 { 921 u8 ctrl; 922 int ret; 923 924 ret = mcp251x_hw_reset(spi); 925 if (ret) 926 return ret; 927 928 ctrl = mcp251x_read_reg(spi, CANCTRL); 929 930 dev_dbg(&spi->dev, "CANCTRL 0x%02x\n", ctrl); 931 932 /* Check for power up default value */ 933 if ((ctrl & 0x17) != 0x07) 934 return -ENODEV; 935 936 return 0; 937 } 938 939 static int mcp251x_power_enable(struct regulator *reg, int enable) 940 { 941 if (IS_ERR_OR_NULL(reg)) 942 return 0; 943 944 if (enable) 945 return regulator_enable(reg); 946 else 947 return regulator_disable(reg); 948 } 949 950 static int mcp251x_stop(struct net_device *net) 951 { 952 struct mcp251x_priv *priv = netdev_priv(net); 953 struct spi_device *spi = priv->spi; 954 955 close_candev(net); 956 957 priv->force_quit = 1; 958 free_irq(spi->irq, priv); 959 960 mutex_lock(&priv->mcp_lock); 961 962 /* Disable and clear pending interrupts */ 963 mcp251x_write_2regs(spi, CANINTE, 0x00, 0x00); 964 965 mcp251x_write_reg(spi, TXBCTRL(0), 0); 966 mcp251x_clean(net); 967 968 mcp251x_hw_sleep(spi); 969 970 mcp251x_power_enable(priv->transceiver, 0); 971 972 priv->can.state = CAN_STATE_STOPPED; 973 974 mutex_unlock(&priv->mcp_lock); 975 976 can_led_event(net, CAN_LED_EVENT_STOP); 977 978 return 0; 979 } 980 981 static void mcp251x_error_skb(struct net_device *net, int can_id, int data1) 982 { 983 struct sk_buff *skb; 984 struct can_frame *frame; 985 986 skb = alloc_can_err_skb(net, &frame); 987 if (skb) { 988 frame->can_id |= can_id; 989 frame->data[1] = data1; 990 netif_rx(skb); 991 } else { 992 netdev_err(net, "cannot allocate error skb\n"); 993 } 994 } 995 996 static void mcp251x_tx_work_handler(struct work_struct *ws) 997 { 998 struct mcp251x_priv *priv = container_of(ws, struct mcp251x_priv, 999 tx_work); 1000 struct spi_device *spi = priv->spi; 1001 struct net_device *net = priv->net; 1002 struct can_frame *frame; 1003 1004 mutex_lock(&priv->mcp_lock); 1005 if (priv->tx_skb) { 1006 if (priv->can.state == CAN_STATE_BUS_OFF) { 1007 mcp251x_clean(net); 1008 } else { 1009 frame = (struct can_frame *)priv->tx_skb->data; 1010 1011 if (frame->len > CAN_FRAME_MAX_DATA_LEN) 1012 frame->len = CAN_FRAME_MAX_DATA_LEN; 1013 mcp251x_hw_tx(spi, frame, 0); 1014 priv->tx_busy = true; 1015 can_put_echo_skb(priv->tx_skb, net, 0, 0); 1016 priv->tx_skb = NULL; 1017 } 1018 } 1019 mutex_unlock(&priv->mcp_lock); 1020 } 1021 1022 static void mcp251x_restart_work_handler(struct work_struct *ws) 1023 { 1024 struct mcp251x_priv *priv = container_of(ws, struct mcp251x_priv, 1025 restart_work); 1026 struct spi_device *spi = priv->spi; 1027 struct net_device *net = priv->net; 1028 1029 mutex_lock(&priv->mcp_lock); 1030 if (priv->after_suspend) { 1031 if (priv->after_suspend & AFTER_SUSPEND_POWER) { 1032 mcp251x_hw_reset(spi); 1033 mcp251x_setup(net, spi); 1034 mcp251x_gpio_restore(spi); 1035 } else { 1036 mcp251x_hw_wake(spi); 1037 } 1038 priv->force_quit = 0; 1039 if (priv->after_suspend & AFTER_SUSPEND_RESTART) { 1040 mcp251x_set_normal_mode(spi); 1041 } else if (priv->after_suspend & AFTER_SUSPEND_UP) { 1042 netif_device_attach(net); 1043 mcp251x_clean(net); 1044 mcp251x_set_normal_mode(spi); 1045 netif_wake_queue(net); 1046 } else { 1047 mcp251x_hw_sleep(spi); 1048 } 1049 priv->after_suspend = 0; 1050 } 1051 1052 if (priv->restart_tx) { 1053 priv->restart_tx = 0; 1054 mcp251x_write_reg(spi, TXBCTRL(0), 0); 1055 mcp251x_clean(net); 1056 netif_wake_queue(net); 1057 mcp251x_error_skb(net, CAN_ERR_RESTARTED, 0); 1058 } 1059 mutex_unlock(&priv->mcp_lock); 1060 } 1061 1062 static irqreturn_t mcp251x_can_ist(int irq, void *dev_id) 1063 { 1064 struct mcp251x_priv *priv = dev_id; 1065 struct spi_device *spi = priv->spi; 1066 struct net_device *net = priv->net; 1067 1068 mutex_lock(&priv->mcp_lock); 1069 while (!priv->force_quit) { 1070 enum can_state new_state; 1071 u8 intf, eflag; 1072 u8 clear_intf = 0; 1073 int can_id = 0, data1 = 0; 1074 1075 mcp251x_read_2regs(spi, CANINTF, &intf, &eflag); 1076 1077 /* mask out flags we don't care about */ 1078 intf &= CANINTF_RX | CANINTF_TX | CANINTF_ERR; 1079 1080 /* receive buffer 0 */ 1081 if (intf & CANINTF_RX0IF) { 1082 mcp251x_hw_rx(spi, 0); 1083 /* Free one buffer ASAP 1084 * (The MCP2515/25625 does this automatically.) 1085 */ 1086 if (mcp251x_is_2510(spi)) 1087 mcp251x_write_bits(spi, CANINTF, 1088 CANINTF_RX0IF, 0x00); 1089 } 1090 1091 /* receive buffer 1 */ 1092 if (intf & CANINTF_RX1IF) { 1093 mcp251x_hw_rx(spi, 1); 1094 /* The MCP2515/25625 does this automatically. */ 1095 if (mcp251x_is_2510(spi)) 1096 clear_intf |= CANINTF_RX1IF; 1097 } 1098 1099 /* any error or tx interrupt we need to clear? */ 1100 if (intf & (CANINTF_ERR | CANINTF_TX)) 1101 clear_intf |= intf & (CANINTF_ERR | CANINTF_TX); 1102 if (clear_intf) 1103 mcp251x_write_bits(spi, CANINTF, clear_intf, 0x00); 1104 1105 if (eflag & (EFLG_RX0OVR | EFLG_RX1OVR)) 1106 mcp251x_write_bits(spi, EFLG, eflag, 0x00); 1107 1108 /* Update can state */ 1109 if (eflag & EFLG_TXBO) { 1110 new_state = CAN_STATE_BUS_OFF; 1111 can_id |= CAN_ERR_BUSOFF; 1112 } else if (eflag & EFLG_TXEP) { 1113 new_state = CAN_STATE_ERROR_PASSIVE; 1114 can_id |= CAN_ERR_CRTL; 1115 data1 |= CAN_ERR_CRTL_TX_PASSIVE; 1116 } else if (eflag & EFLG_RXEP) { 1117 new_state = CAN_STATE_ERROR_PASSIVE; 1118 can_id |= CAN_ERR_CRTL; 1119 data1 |= CAN_ERR_CRTL_RX_PASSIVE; 1120 } else if (eflag & EFLG_TXWAR) { 1121 new_state = CAN_STATE_ERROR_WARNING; 1122 can_id |= CAN_ERR_CRTL; 1123 data1 |= CAN_ERR_CRTL_TX_WARNING; 1124 } else if (eflag & EFLG_RXWAR) { 1125 new_state = CAN_STATE_ERROR_WARNING; 1126 can_id |= CAN_ERR_CRTL; 1127 data1 |= CAN_ERR_CRTL_RX_WARNING; 1128 } else { 1129 new_state = CAN_STATE_ERROR_ACTIVE; 1130 } 1131 1132 /* Update can state statistics */ 1133 switch (priv->can.state) { 1134 case CAN_STATE_ERROR_ACTIVE: 1135 if (new_state >= CAN_STATE_ERROR_WARNING && 1136 new_state <= CAN_STATE_BUS_OFF) 1137 priv->can.can_stats.error_warning++; 1138 fallthrough; 1139 case CAN_STATE_ERROR_WARNING: 1140 if (new_state >= CAN_STATE_ERROR_PASSIVE && 1141 new_state <= CAN_STATE_BUS_OFF) 1142 priv->can.can_stats.error_passive++; 1143 break; 1144 default: 1145 break; 1146 } 1147 priv->can.state = new_state; 1148 1149 if (intf & CANINTF_ERRIF) { 1150 /* Handle overflow counters */ 1151 if (eflag & (EFLG_RX0OVR | EFLG_RX1OVR)) { 1152 if (eflag & EFLG_RX0OVR) { 1153 net->stats.rx_over_errors++; 1154 net->stats.rx_errors++; 1155 } 1156 if (eflag & EFLG_RX1OVR) { 1157 net->stats.rx_over_errors++; 1158 net->stats.rx_errors++; 1159 } 1160 can_id |= CAN_ERR_CRTL; 1161 data1 |= CAN_ERR_CRTL_RX_OVERFLOW; 1162 } 1163 mcp251x_error_skb(net, can_id, data1); 1164 } 1165 1166 if (priv->can.state == CAN_STATE_BUS_OFF) { 1167 if (priv->can.restart_ms == 0) { 1168 priv->force_quit = 1; 1169 priv->can.can_stats.bus_off++; 1170 can_bus_off(net); 1171 mcp251x_hw_sleep(spi); 1172 break; 1173 } 1174 } 1175 1176 if (intf == 0) 1177 break; 1178 1179 if (intf & CANINTF_TX) { 1180 can_led_event(net, CAN_LED_EVENT_TX); 1181 if (priv->tx_busy) { 1182 net->stats.tx_packets++; 1183 net->stats.tx_bytes += can_get_echo_skb(net, 0, 1184 NULL); 1185 priv->tx_busy = false; 1186 } 1187 netif_wake_queue(net); 1188 } 1189 } 1190 mutex_unlock(&priv->mcp_lock); 1191 return IRQ_HANDLED; 1192 } 1193 1194 static int mcp251x_open(struct net_device *net) 1195 { 1196 struct mcp251x_priv *priv = netdev_priv(net); 1197 struct spi_device *spi = priv->spi; 1198 unsigned long flags = 0; 1199 int ret; 1200 1201 ret = open_candev(net); 1202 if (ret) { 1203 dev_err(&spi->dev, "unable to set initial baudrate!\n"); 1204 return ret; 1205 } 1206 1207 mutex_lock(&priv->mcp_lock); 1208 mcp251x_power_enable(priv->transceiver, 1); 1209 1210 priv->force_quit = 0; 1211 priv->tx_skb = NULL; 1212 priv->tx_busy = false; 1213 1214 if (!dev_fwnode(&spi->dev)) 1215 flags = IRQF_TRIGGER_FALLING; 1216 1217 ret = request_threaded_irq(spi->irq, NULL, mcp251x_can_ist, 1218 flags | IRQF_ONESHOT, dev_name(&spi->dev), 1219 priv); 1220 if (ret) { 1221 dev_err(&spi->dev, "failed to acquire irq %d\n", spi->irq); 1222 goto out_close; 1223 } 1224 1225 ret = mcp251x_hw_wake(spi); 1226 if (ret) 1227 goto out_free_irq; 1228 ret = mcp251x_setup(net, spi); 1229 if (ret) 1230 goto out_free_irq; 1231 ret = mcp251x_set_normal_mode(spi); 1232 if (ret) 1233 goto out_free_irq; 1234 1235 can_led_event(net, CAN_LED_EVENT_OPEN); 1236 1237 netif_wake_queue(net); 1238 mutex_unlock(&priv->mcp_lock); 1239 1240 return 0; 1241 1242 out_free_irq: 1243 free_irq(spi->irq, priv); 1244 mcp251x_hw_sleep(spi); 1245 out_close: 1246 mcp251x_power_enable(priv->transceiver, 0); 1247 close_candev(net); 1248 mutex_unlock(&priv->mcp_lock); 1249 return ret; 1250 } 1251 1252 static const struct net_device_ops mcp251x_netdev_ops = { 1253 .ndo_open = mcp251x_open, 1254 .ndo_stop = mcp251x_stop, 1255 .ndo_start_xmit = mcp251x_hard_start_xmit, 1256 .ndo_change_mtu = can_change_mtu, 1257 }; 1258 1259 static const struct of_device_id mcp251x_of_match[] = { 1260 { 1261 .compatible = "microchip,mcp2510", 1262 .data = (void *)CAN_MCP251X_MCP2510, 1263 }, 1264 { 1265 .compatible = "microchip,mcp2515", 1266 .data = (void *)CAN_MCP251X_MCP2515, 1267 }, 1268 { 1269 .compatible = "microchip,mcp25625", 1270 .data = (void *)CAN_MCP251X_MCP25625, 1271 }, 1272 { } 1273 }; 1274 MODULE_DEVICE_TABLE(of, mcp251x_of_match); 1275 1276 static const struct spi_device_id mcp251x_id_table[] = { 1277 { 1278 .name = "mcp2510", 1279 .driver_data = (kernel_ulong_t)CAN_MCP251X_MCP2510, 1280 }, 1281 { 1282 .name = "mcp2515", 1283 .driver_data = (kernel_ulong_t)CAN_MCP251X_MCP2515, 1284 }, 1285 { 1286 .name = "mcp25625", 1287 .driver_data = (kernel_ulong_t)CAN_MCP251X_MCP25625, 1288 }, 1289 { } 1290 }; 1291 MODULE_DEVICE_TABLE(spi, mcp251x_id_table); 1292 1293 static int mcp251x_can_probe(struct spi_device *spi) 1294 { 1295 const void *match = device_get_match_data(&spi->dev); 1296 struct net_device *net; 1297 struct mcp251x_priv *priv; 1298 struct clk *clk; 1299 u32 freq; 1300 int ret; 1301 1302 clk = devm_clk_get_optional(&spi->dev, NULL); 1303 if (IS_ERR(clk)) 1304 return PTR_ERR(clk); 1305 1306 freq = clk_get_rate(clk); 1307 if (freq == 0) 1308 device_property_read_u32(&spi->dev, "clock-frequency", &freq); 1309 1310 /* Sanity check */ 1311 if (freq < 1000000 || freq > 25000000) 1312 return -ERANGE; 1313 1314 /* Allocate can/net device */ 1315 net = alloc_candev(sizeof(struct mcp251x_priv), TX_ECHO_SKB_MAX); 1316 if (!net) 1317 return -ENOMEM; 1318 1319 ret = clk_prepare_enable(clk); 1320 if (ret) 1321 goto out_free; 1322 1323 net->netdev_ops = &mcp251x_netdev_ops; 1324 net->flags |= IFF_ECHO; 1325 1326 priv = netdev_priv(net); 1327 priv->can.bittiming_const = &mcp251x_bittiming_const; 1328 priv->can.do_set_mode = mcp251x_do_set_mode; 1329 priv->can.clock.freq = freq / 2; 1330 priv->can.ctrlmode_supported = CAN_CTRLMODE_3_SAMPLES | 1331 CAN_CTRLMODE_LOOPBACK | CAN_CTRLMODE_LISTENONLY; 1332 if (match) 1333 priv->model = (enum mcp251x_model)(uintptr_t)match; 1334 else 1335 priv->model = spi_get_device_id(spi)->driver_data; 1336 priv->net = net; 1337 priv->clk = clk; 1338 1339 spi_set_drvdata(spi, priv); 1340 1341 /* Configure the SPI bus */ 1342 spi->bits_per_word = 8; 1343 if (mcp251x_is_2510(spi)) 1344 spi->max_speed_hz = spi->max_speed_hz ? : 5 * 1000 * 1000; 1345 else 1346 spi->max_speed_hz = spi->max_speed_hz ? : 10 * 1000 * 1000; 1347 ret = spi_setup(spi); 1348 if (ret) 1349 goto out_clk; 1350 1351 priv->power = devm_regulator_get_optional(&spi->dev, "vdd"); 1352 priv->transceiver = devm_regulator_get_optional(&spi->dev, "xceiver"); 1353 if ((PTR_ERR(priv->power) == -EPROBE_DEFER) || 1354 (PTR_ERR(priv->transceiver) == -EPROBE_DEFER)) { 1355 ret = -EPROBE_DEFER; 1356 goto out_clk; 1357 } 1358 1359 ret = mcp251x_power_enable(priv->power, 1); 1360 if (ret) 1361 goto out_clk; 1362 1363 priv->wq = alloc_workqueue("mcp251x_wq", WQ_FREEZABLE | WQ_MEM_RECLAIM, 1364 0); 1365 if (!priv->wq) { 1366 ret = -ENOMEM; 1367 goto out_clk; 1368 } 1369 INIT_WORK(&priv->tx_work, mcp251x_tx_work_handler); 1370 INIT_WORK(&priv->restart_work, mcp251x_restart_work_handler); 1371 1372 priv->spi = spi; 1373 mutex_init(&priv->mcp_lock); 1374 1375 priv->spi_tx_buf = devm_kzalloc(&spi->dev, SPI_TRANSFER_BUF_LEN, 1376 GFP_KERNEL); 1377 if (!priv->spi_tx_buf) { 1378 ret = -ENOMEM; 1379 goto error_probe; 1380 } 1381 1382 priv->spi_rx_buf = devm_kzalloc(&spi->dev, SPI_TRANSFER_BUF_LEN, 1383 GFP_KERNEL); 1384 if (!priv->spi_rx_buf) { 1385 ret = -ENOMEM; 1386 goto error_probe; 1387 } 1388 1389 SET_NETDEV_DEV(net, &spi->dev); 1390 1391 /* Here is OK to not lock the MCP, no one knows about it yet */ 1392 ret = mcp251x_hw_probe(spi); 1393 if (ret) { 1394 if (ret == -ENODEV) 1395 dev_err(&spi->dev, "Cannot initialize MCP%x. Wrong wiring?\n", 1396 priv->model); 1397 goto error_probe; 1398 } 1399 1400 mcp251x_hw_sleep(spi); 1401 1402 ret = register_candev(net); 1403 if (ret) 1404 goto error_probe; 1405 1406 devm_can_led_init(net); 1407 1408 ret = mcp251x_gpio_setup(priv); 1409 if (ret) 1410 goto error_probe; 1411 1412 netdev_info(net, "MCP%x successfully initialized.\n", priv->model); 1413 return 0; 1414 1415 error_probe: 1416 destroy_workqueue(priv->wq); 1417 priv->wq = NULL; 1418 mcp251x_power_enable(priv->power, 0); 1419 1420 out_clk: 1421 clk_disable_unprepare(clk); 1422 1423 out_free: 1424 free_candev(net); 1425 1426 dev_err(&spi->dev, "Probe failed, err=%d\n", -ret); 1427 return ret; 1428 } 1429 1430 static void mcp251x_can_remove(struct spi_device *spi) 1431 { 1432 struct mcp251x_priv *priv = spi_get_drvdata(spi); 1433 struct net_device *net = priv->net; 1434 1435 unregister_candev(net); 1436 1437 mcp251x_power_enable(priv->power, 0); 1438 1439 destroy_workqueue(priv->wq); 1440 priv->wq = NULL; 1441 1442 clk_disable_unprepare(priv->clk); 1443 1444 free_candev(net); 1445 } 1446 1447 static int __maybe_unused mcp251x_can_suspend(struct device *dev) 1448 { 1449 struct spi_device *spi = to_spi_device(dev); 1450 struct mcp251x_priv *priv = spi_get_drvdata(spi); 1451 struct net_device *net = priv->net; 1452 1453 priv->force_quit = 1; 1454 disable_irq(spi->irq); 1455 /* Note: at this point neither IST nor workqueues are running. 1456 * open/stop cannot be called anyway so locking is not needed 1457 */ 1458 if (netif_running(net)) { 1459 netif_device_detach(net); 1460 1461 mcp251x_hw_sleep(spi); 1462 mcp251x_power_enable(priv->transceiver, 0); 1463 priv->after_suspend = AFTER_SUSPEND_UP; 1464 } else { 1465 priv->after_suspend = AFTER_SUSPEND_DOWN; 1466 } 1467 1468 mcp251x_power_enable(priv->power, 0); 1469 priv->after_suspend |= AFTER_SUSPEND_POWER; 1470 1471 return 0; 1472 } 1473 1474 static int __maybe_unused mcp251x_can_resume(struct device *dev) 1475 { 1476 struct spi_device *spi = to_spi_device(dev); 1477 struct mcp251x_priv *priv = spi_get_drvdata(spi); 1478 1479 if (priv->after_suspend & AFTER_SUSPEND_POWER) 1480 mcp251x_power_enable(priv->power, 1); 1481 if (priv->after_suspend & AFTER_SUSPEND_UP) 1482 mcp251x_power_enable(priv->transceiver, 1); 1483 1484 if (priv->after_suspend & (AFTER_SUSPEND_POWER | AFTER_SUSPEND_UP)) 1485 queue_work(priv->wq, &priv->restart_work); 1486 else 1487 priv->after_suspend = 0; 1488 1489 priv->force_quit = 0; 1490 enable_irq(spi->irq); 1491 return 0; 1492 } 1493 1494 static SIMPLE_DEV_PM_OPS(mcp251x_can_pm_ops, mcp251x_can_suspend, 1495 mcp251x_can_resume); 1496 1497 static struct spi_driver mcp251x_can_driver = { 1498 .driver = { 1499 .name = DEVICE_NAME, 1500 .of_match_table = mcp251x_of_match, 1501 .pm = &mcp251x_can_pm_ops, 1502 }, 1503 .id_table = mcp251x_id_table, 1504 .probe = mcp251x_can_probe, 1505 .remove = mcp251x_can_remove, 1506 }; 1507 module_spi_driver(mcp251x_can_driver); 1508 1509 MODULE_AUTHOR("Chris Elston <celston@katalix.com>, " 1510 "Christian Pellegrin <chripell@evolware.org>"); 1511 MODULE_DESCRIPTION("Microchip 251x/25625 CAN driver"); 1512 MODULE_LICENSE("GPL v2"); 1513