1 /* 2 * CAN bus driver for Microchip 251x CAN Controller with SPI Interface 3 * 4 * MCP2510 support and bug fixes by Christian Pellegrin 5 * <chripell@evolware.org> 6 * 7 * Copyright 2009 Christian Pellegrin EVOL S.r.l. 8 * 9 * Copyright 2007 Raymarine UK, Ltd. All Rights Reserved. 10 * Written under contract by: 11 * Chris Elston, Katalix Systems, Ltd. 12 * 13 * Based on Microchip MCP251x CAN controller driver written by 14 * David Vrabel, Copyright 2006 Arcom Control Systems Ltd. 15 * 16 * Based on CAN bus driver for the CCAN controller written by 17 * - Sascha Hauer, Marc Kleine-Budde, Pengutronix 18 * - Simon Kallweit, intefo AG 19 * Copyright 2007 20 * 21 * This program is free software; you can redistribute it and/or modify 22 * it under the terms of the version 2 of the GNU General Public License 23 * as published by the Free Software Foundation 24 * 25 * This program is distributed in the hope that it will be useful, 26 * but WITHOUT ANY WARRANTY; without even the implied warranty of 27 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the 28 * GNU General Public License for more details. 29 * 30 * You should have received a copy of the GNU General Public License 31 * along with this program; if not, see <http://www.gnu.org/licenses/>. 32 * 33 * 34 * 35 * Your platform definition file should specify something like: 36 * 37 * static struct mcp251x_platform_data mcp251x_info = { 38 * .oscillator_frequency = 8000000, 39 * }; 40 * 41 * static struct spi_board_info spi_board_info[] = { 42 * { 43 * .modalias = "mcp2510", 44 * // or "mcp2515" depending on your controller 45 * .platform_data = &mcp251x_info, 46 * .irq = IRQ_EINT13, 47 * .max_speed_hz = 2*1000*1000, 48 * .chip_select = 2, 49 * }, 50 * }; 51 * 52 * Please see mcp251x.h for a description of the fields in 53 * struct mcp251x_platform_data. 54 * 55 */ 56 57 #include <linux/can/core.h> 58 #include <linux/can/dev.h> 59 #include <linux/can/led.h> 60 #include <linux/can/platform/mcp251x.h> 61 #include <linux/clk.h> 62 #include <linux/completion.h> 63 #include <linux/delay.h> 64 #include <linux/device.h> 65 #include <linux/dma-mapping.h> 66 #include <linux/freezer.h> 67 #include <linux/interrupt.h> 68 #include <linux/io.h> 69 #include <linux/kernel.h> 70 #include <linux/module.h> 71 #include <linux/netdevice.h> 72 #include <linux/of.h> 73 #include <linux/of_device.h> 74 #include <linux/platform_device.h> 75 #include <linux/slab.h> 76 #include <linux/spi/spi.h> 77 #include <linux/uaccess.h> 78 #include <linux/regulator/consumer.h> 79 80 /* SPI interface instruction set */ 81 #define INSTRUCTION_WRITE 0x02 82 #define INSTRUCTION_READ 0x03 83 #define INSTRUCTION_BIT_MODIFY 0x05 84 #define INSTRUCTION_LOAD_TXB(n) (0x40 + 2 * (n)) 85 #define INSTRUCTION_READ_RXB(n) (((n) == 0) ? 0x90 : 0x94) 86 #define INSTRUCTION_RESET 0xC0 87 #define RTS_TXB0 0x01 88 #define RTS_TXB1 0x02 89 #define RTS_TXB2 0x04 90 #define INSTRUCTION_RTS(n) (0x80 | ((n) & 0x07)) 91 92 93 /* MPC251x registers */ 94 #define CANSTAT 0x0e 95 #define CANCTRL 0x0f 96 # define CANCTRL_REQOP_MASK 0xe0 97 # define CANCTRL_REQOP_CONF 0x80 98 # define CANCTRL_REQOP_LISTEN_ONLY 0x60 99 # define CANCTRL_REQOP_LOOPBACK 0x40 100 # define CANCTRL_REQOP_SLEEP 0x20 101 # define CANCTRL_REQOP_NORMAL 0x00 102 # define CANCTRL_OSM 0x08 103 # define CANCTRL_ABAT 0x10 104 #define TEC 0x1c 105 #define REC 0x1d 106 #define CNF1 0x2a 107 # define CNF1_SJW_SHIFT 6 108 #define CNF2 0x29 109 # define CNF2_BTLMODE 0x80 110 # define CNF2_SAM 0x40 111 # define CNF2_PS1_SHIFT 3 112 #define CNF3 0x28 113 # define CNF3_SOF 0x08 114 # define CNF3_WAKFIL 0x04 115 # define CNF3_PHSEG2_MASK 0x07 116 #define CANINTE 0x2b 117 # define CANINTE_MERRE 0x80 118 # define CANINTE_WAKIE 0x40 119 # define CANINTE_ERRIE 0x20 120 # define CANINTE_TX2IE 0x10 121 # define CANINTE_TX1IE 0x08 122 # define CANINTE_TX0IE 0x04 123 # define CANINTE_RX1IE 0x02 124 # define CANINTE_RX0IE 0x01 125 #define CANINTF 0x2c 126 # define CANINTF_MERRF 0x80 127 # define CANINTF_WAKIF 0x40 128 # define CANINTF_ERRIF 0x20 129 # define CANINTF_TX2IF 0x10 130 # define CANINTF_TX1IF 0x08 131 # define CANINTF_TX0IF 0x04 132 # define CANINTF_RX1IF 0x02 133 # define CANINTF_RX0IF 0x01 134 # define CANINTF_RX (CANINTF_RX0IF | CANINTF_RX1IF) 135 # define CANINTF_TX (CANINTF_TX2IF | CANINTF_TX1IF | CANINTF_TX0IF) 136 # define CANINTF_ERR (CANINTF_ERRIF) 137 #define EFLG 0x2d 138 # define EFLG_EWARN 0x01 139 # define EFLG_RXWAR 0x02 140 # define EFLG_TXWAR 0x04 141 # define EFLG_RXEP 0x08 142 # define EFLG_TXEP 0x10 143 # define EFLG_TXBO 0x20 144 # define EFLG_RX0OVR 0x40 145 # define EFLG_RX1OVR 0x80 146 #define TXBCTRL(n) (((n) * 0x10) + 0x30 + TXBCTRL_OFF) 147 # define TXBCTRL_ABTF 0x40 148 # define TXBCTRL_MLOA 0x20 149 # define TXBCTRL_TXERR 0x10 150 # define TXBCTRL_TXREQ 0x08 151 #define TXBSIDH(n) (((n) * 0x10) + 0x30 + TXBSIDH_OFF) 152 # define SIDH_SHIFT 3 153 #define TXBSIDL(n) (((n) * 0x10) + 0x30 + TXBSIDL_OFF) 154 # define SIDL_SID_MASK 7 155 # define SIDL_SID_SHIFT 5 156 # define SIDL_EXIDE_SHIFT 3 157 # define SIDL_EID_SHIFT 16 158 # define SIDL_EID_MASK 3 159 #define TXBEID8(n) (((n) * 0x10) + 0x30 + TXBEID8_OFF) 160 #define TXBEID0(n) (((n) * 0x10) + 0x30 + TXBEID0_OFF) 161 #define TXBDLC(n) (((n) * 0x10) + 0x30 + TXBDLC_OFF) 162 # define DLC_RTR_SHIFT 6 163 #define TXBCTRL_OFF 0 164 #define TXBSIDH_OFF 1 165 #define TXBSIDL_OFF 2 166 #define TXBEID8_OFF 3 167 #define TXBEID0_OFF 4 168 #define TXBDLC_OFF 5 169 #define TXBDAT_OFF 6 170 #define RXBCTRL(n) (((n) * 0x10) + 0x60 + RXBCTRL_OFF) 171 # define RXBCTRL_BUKT 0x04 172 # define RXBCTRL_RXM0 0x20 173 # define RXBCTRL_RXM1 0x40 174 #define RXBSIDH(n) (((n) * 0x10) + 0x60 + RXBSIDH_OFF) 175 # define RXBSIDH_SHIFT 3 176 #define RXBSIDL(n) (((n) * 0x10) + 0x60 + RXBSIDL_OFF) 177 # define RXBSIDL_IDE 0x08 178 # define RXBSIDL_SRR 0x10 179 # define RXBSIDL_EID 3 180 # define RXBSIDL_SHIFT 5 181 #define RXBEID8(n) (((n) * 0x10) + 0x60 + RXBEID8_OFF) 182 #define RXBEID0(n) (((n) * 0x10) + 0x60 + RXBEID0_OFF) 183 #define RXBDLC(n) (((n) * 0x10) + 0x60 + RXBDLC_OFF) 184 # define RXBDLC_LEN_MASK 0x0f 185 # define RXBDLC_RTR 0x40 186 #define RXBCTRL_OFF 0 187 #define RXBSIDH_OFF 1 188 #define RXBSIDL_OFF 2 189 #define RXBEID8_OFF 3 190 #define RXBEID0_OFF 4 191 #define RXBDLC_OFF 5 192 #define RXBDAT_OFF 6 193 #define RXFSID(n) ((n < 3) ? 0 : 4) 194 #define RXFSIDH(n) ((n) * 4 + RXFSID(n)) 195 #define RXFSIDL(n) ((n) * 4 + 1 + RXFSID(n)) 196 #define RXFEID8(n) ((n) * 4 + 2 + RXFSID(n)) 197 #define RXFEID0(n) ((n) * 4 + 3 + RXFSID(n)) 198 #define RXMSIDH(n) ((n) * 4 + 0x20) 199 #define RXMSIDL(n) ((n) * 4 + 0x21) 200 #define RXMEID8(n) ((n) * 4 + 0x22) 201 #define RXMEID0(n) ((n) * 4 + 0x23) 202 203 #define GET_BYTE(val, byte) \ 204 (((val) >> ((byte) * 8)) & 0xff) 205 #define SET_BYTE(val, byte) \ 206 (((val) & 0xff) << ((byte) * 8)) 207 208 /* 209 * Buffer size required for the largest SPI transfer (i.e., reading a 210 * frame) 211 */ 212 #define CAN_FRAME_MAX_DATA_LEN 8 213 #define SPI_TRANSFER_BUF_LEN (6 + CAN_FRAME_MAX_DATA_LEN) 214 #define CAN_FRAME_MAX_BITS 128 215 216 #define TX_ECHO_SKB_MAX 1 217 218 #define MCP251X_OST_DELAY_MS (5) 219 220 #define DEVICE_NAME "mcp251x" 221 222 static int mcp251x_enable_dma; /* Enable SPI DMA. Default: 0 (Off) */ 223 module_param(mcp251x_enable_dma, int, S_IRUGO); 224 MODULE_PARM_DESC(mcp251x_enable_dma, "Enable SPI DMA. Default: 0 (Off)"); 225 226 static const struct can_bittiming_const mcp251x_bittiming_const = { 227 .name = DEVICE_NAME, 228 .tseg1_min = 3, 229 .tseg1_max = 16, 230 .tseg2_min = 2, 231 .tseg2_max = 8, 232 .sjw_max = 4, 233 .brp_min = 1, 234 .brp_max = 64, 235 .brp_inc = 1, 236 }; 237 238 enum mcp251x_model { 239 CAN_MCP251X_MCP2510 = 0x2510, 240 CAN_MCP251X_MCP2515 = 0x2515, 241 }; 242 243 struct mcp251x_priv { 244 struct can_priv can; 245 struct net_device *net; 246 struct spi_device *spi; 247 enum mcp251x_model model; 248 249 struct mutex mcp_lock; /* SPI device lock */ 250 251 u8 *spi_tx_buf; 252 u8 *spi_rx_buf; 253 dma_addr_t spi_tx_dma; 254 dma_addr_t spi_rx_dma; 255 256 struct sk_buff *tx_skb; 257 int tx_len; 258 259 struct workqueue_struct *wq; 260 struct work_struct tx_work; 261 struct work_struct restart_work; 262 263 int force_quit; 264 int after_suspend; 265 #define AFTER_SUSPEND_UP 1 266 #define AFTER_SUSPEND_DOWN 2 267 #define AFTER_SUSPEND_POWER 4 268 #define AFTER_SUSPEND_RESTART 8 269 int restart_tx; 270 struct regulator *power; 271 struct regulator *transceiver; 272 struct clk *clk; 273 }; 274 275 #define MCP251X_IS(_model) \ 276 static inline int mcp251x_is_##_model(struct spi_device *spi) \ 277 { \ 278 struct mcp251x_priv *priv = spi_get_drvdata(spi); \ 279 return priv->model == CAN_MCP251X_MCP##_model; \ 280 } 281 282 MCP251X_IS(2510); 283 MCP251X_IS(2515); 284 285 static void mcp251x_clean(struct net_device *net) 286 { 287 struct mcp251x_priv *priv = netdev_priv(net); 288 289 if (priv->tx_skb || priv->tx_len) 290 net->stats.tx_errors++; 291 if (priv->tx_skb) 292 dev_kfree_skb(priv->tx_skb); 293 if (priv->tx_len) 294 can_free_echo_skb(priv->net, 0); 295 priv->tx_skb = NULL; 296 priv->tx_len = 0; 297 } 298 299 /* 300 * Note about handling of error return of mcp251x_spi_trans: accessing 301 * registers via SPI is not really different conceptually than using 302 * normal I/O assembler instructions, although it's much more 303 * complicated from a practical POV. So it's not advisable to always 304 * check the return value of this function. Imagine that every 305 * read{b,l}, write{b,l} and friends would be bracketed in "if ( < 0) 306 * error();", it would be a great mess (well there are some situation 307 * when exception handling C++ like could be useful after all). So we 308 * just check that transfers are OK at the beginning of our 309 * conversation with the chip and to avoid doing really nasty things 310 * (like injecting bogus packets in the network stack). 311 */ 312 static int mcp251x_spi_trans(struct spi_device *spi, int len) 313 { 314 struct mcp251x_priv *priv = spi_get_drvdata(spi); 315 struct spi_transfer t = { 316 .tx_buf = priv->spi_tx_buf, 317 .rx_buf = priv->spi_rx_buf, 318 .len = len, 319 .cs_change = 0, 320 }; 321 struct spi_message m; 322 int ret; 323 324 spi_message_init(&m); 325 326 if (mcp251x_enable_dma) { 327 t.tx_dma = priv->spi_tx_dma; 328 t.rx_dma = priv->spi_rx_dma; 329 m.is_dma_mapped = 1; 330 } 331 332 spi_message_add_tail(&t, &m); 333 334 ret = spi_sync(spi, &m); 335 if (ret) 336 dev_err(&spi->dev, "spi transfer failed: ret = %d\n", ret); 337 return ret; 338 } 339 340 static u8 mcp251x_read_reg(struct spi_device *spi, uint8_t reg) 341 { 342 struct mcp251x_priv *priv = spi_get_drvdata(spi); 343 u8 val = 0; 344 345 priv->spi_tx_buf[0] = INSTRUCTION_READ; 346 priv->spi_tx_buf[1] = reg; 347 348 mcp251x_spi_trans(spi, 3); 349 val = priv->spi_rx_buf[2]; 350 351 return val; 352 } 353 354 static void mcp251x_read_2regs(struct spi_device *spi, uint8_t reg, 355 uint8_t *v1, uint8_t *v2) 356 { 357 struct mcp251x_priv *priv = spi_get_drvdata(spi); 358 359 priv->spi_tx_buf[0] = INSTRUCTION_READ; 360 priv->spi_tx_buf[1] = reg; 361 362 mcp251x_spi_trans(spi, 4); 363 364 *v1 = priv->spi_rx_buf[2]; 365 *v2 = priv->spi_rx_buf[3]; 366 } 367 368 static void mcp251x_write_reg(struct spi_device *spi, u8 reg, uint8_t val) 369 { 370 struct mcp251x_priv *priv = spi_get_drvdata(spi); 371 372 priv->spi_tx_buf[0] = INSTRUCTION_WRITE; 373 priv->spi_tx_buf[1] = reg; 374 priv->spi_tx_buf[2] = val; 375 376 mcp251x_spi_trans(spi, 3); 377 } 378 379 static void mcp251x_write_bits(struct spi_device *spi, u8 reg, 380 u8 mask, uint8_t val) 381 { 382 struct mcp251x_priv *priv = spi_get_drvdata(spi); 383 384 priv->spi_tx_buf[0] = INSTRUCTION_BIT_MODIFY; 385 priv->spi_tx_buf[1] = reg; 386 priv->spi_tx_buf[2] = mask; 387 priv->spi_tx_buf[3] = val; 388 389 mcp251x_spi_trans(spi, 4); 390 } 391 392 static void mcp251x_hw_tx_frame(struct spi_device *spi, u8 *buf, 393 int len, int tx_buf_idx) 394 { 395 struct mcp251x_priv *priv = spi_get_drvdata(spi); 396 397 if (mcp251x_is_2510(spi)) { 398 int i; 399 400 for (i = 1; i < TXBDAT_OFF + len; i++) 401 mcp251x_write_reg(spi, TXBCTRL(tx_buf_idx) + i, 402 buf[i]); 403 } else { 404 memcpy(priv->spi_tx_buf, buf, TXBDAT_OFF + len); 405 mcp251x_spi_trans(spi, TXBDAT_OFF + len); 406 } 407 } 408 409 static void mcp251x_hw_tx(struct spi_device *spi, struct can_frame *frame, 410 int tx_buf_idx) 411 { 412 struct mcp251x_priv *priv = spi_get_drvdata(spi); 413 u32 sid, eid, exide, rtr; 414 u8 buf[SPI_TRANSFER_BUF_LEN]; 415 416 exide = (frame->can_id & CAN_EFF_FLAG) ? 1 : 0; /* Extended ID Enable */ 417 if (exide) 418 sid = (frame->can_id & CAN_EFF_MASK) >> 18; 419 else 420 sid = frame->can_id & CAN_SFF_MASK; /* Standard ID */ 421 eid = frame->can_id & CAN_EFF_MASK; /* Extended ID */ 422 rtr = (frame->can_id & CAN_RTR_FLAG) ? 1 : 0; /* Remote transmission */ 423 424 buf[TXBCTRL_OFF] = INSTRUCTION_LOAD_TXB(tx_buf_idx); 425 buf[TXBSIDH_OFF] = sid >> SIDH_SHIFT; 426 buf[TXBSIDL_OFF] = ((sid & SIDL_SID_MASK) << SIDL_SID_SHIFT) | 427 (exide << SIDL_EXIDE_SHIFT) | 428 ((eid >> SIDL_EID_SHIFT) & SIDL_EID_MASK); 429 buf[TXBEID8_OFF] = GET_BYTE(eid, 1); 430 buf[TXBEID0_OFF] = GET_BYTE(eid, 0); 431 buf[TXBDLC_OFF] = (rtr << DLC_RTR_SHIFT) | frame->can_dlc; 432 memcpy(buf + TXBDAT_OFF, frame->data, frame->can_dlc); 433 mcp251x_hw_tx_frame(spi, buf, frame->can_dlc, tx_buf_idx); 434 435 /* use INSTRUCTION_RTS, to avoid "repeated frame problem" */ 436 priv->spi_tx_buf[0] = INSTRUCTION_RTS(1 << tx_buf_idx); 437 mcp251x_spi_trans(priv->spi, 1); 438 } 439 440 static void mcp251x_hw_rx_frame(struct spi_device *spi, u8 *buf, 441 int buf_idx) 442 { 443 struct mcp251x_priv *priv = spi_get_drvdata(spi); 444 445 if (mcp251x_is_2510(spi)) { 446 int i, len; 447 448 for (i = 1; i < RXBDAT_OFF; i++) 449 buf[i] = mcp251x_read_reg(spi, RXBCTRL(buf_idx) + i); 450 451 len = get_can_dlc(buf[RXBDLC_OFF] & RXBDLC_LEN_MASK); 452 for (; i < (RXBDAT_OFF + len); i++) 453 buf[i] = mcp251x_read_reg(spi, RXBCTRL(buf_idx) + i); 454 } else { 455 priv->spi_tx_buf[RXBCTRL_OFF] = INSTRUCTION_READ_RXB(buf_idx); 456 mcp251x_spi_trans(spi, SPI_TRANSFER_BUF_LEN); 457 memcpy(buf, priv->spi_rx_buf, SPI_TRANSFER_BUF_LEN); 458 } 459 } 460 461 static void mcp251x_hw_rx(struct spi_device *spi, int buf_idx) 462 { 463 struct mcp251x_priv *priv = spi_get_drvdata(spi); 464 struct sk_buff *skb; 465 struct can_frame *frame; 466 u8 buf[SPI_TRANSFER_BUF_LEN]; 467 468 skb = alloc_can_skb(priv->net, &frame); 469 if (!skb) { 470 dev_err(&spi->dev, "cannot allocate RX skb\n"); 471 priv->net->stats.rx_dropped++; 472 return; 473 } 474 475 mcp251x_hw_rx_frame(spi, buf, buf_idx); 476 if (buf[RXBSIDL_OFF] & RXBSIDL_IDE) { 477 /* Extended ID format */ 478 frame->can_id = CAN_EFF_FLAG; 479 frame->can_id |= 480 /* Extended ID part */ 481 SET_BYTE(buf[RXBSIDL_OFF] & RXBSIDL_EID, 2) | 482 SET_BYTE(buf[RXBEID8_OFF], 1) | 483 SET_BYTE(buf[RXBEID0_OFF], 0) | 484 /* Standard ID part */ 485 (((buf[RXBSIDH_OFF] << RXBSIDH_SHIFT) | 486 (buf[RXBSIDL_OFF] >> RXBSIDL_SHIFT)) << 18); 487 /* Remote transmission request */ 488 if (buf[RXBDLC_OFF] & RXBDLC_RTR) 489 frame->can_id |= CAN_RTR_FLAG; 490 } else { 491 /* Standard ID format */ 492 frame->can_id = 493 (buf[RXBSIDH_OFF] << RXBSIDH_SHIFT) | 494 (buf[RXBSIDL_OFF] >> RXBSIDL_SHIFT); 495 if (buf[RXBSIDL_OFF] & RXBSIDL_SRR) 496 frame->can_id |= CAN_RTR_FLAG; 497 } 498 /* Data length */ 499 frame->can_dlc = get_can_dlc(buf[RXBDLC_OFF] & RXBDLC_LEN_MASK); 500 memcpy(frame->data, buf + RXBDAT_OFF, frame->can_dlc); 501 502 priv->net->stats.rx_packets++; 503 priv->net->stats.rx_bytes += frame->can_dlc; 504 505 can_led_event(priv->net, CAN_LED_EVENT_RX); 506 507 netif_rx_ni(skb); 508 } 509 510 static void mcp251x_hw_sleep(struct spi_device *spi) 511 { 512 mcp251x_write_reg(spi, CANCTRL, CANCTRL_REQOP_SLEEP); 513 } 514 515 static netdev_tx_t mcp251x_hard_start_xmit(struct sk_buff *skb, 516 struct net_device *net) 517 { 518 struct mcp251x_priv *priv = netdev_priv(net); 519 struct spi_device *spi = priv->spi; 520 521 if (priv->tx_skb || priv->tx_len) { 522 dev_warn(&spi->dev, "hard_xmit called while tx busy\n"); 523 return NETDEV_TX_BUSY; 524 } 525 526 if (can_dropped_invalid_skb(net, skb)) 527 return NETDEV_TX_OK; 528 529 netif_stop_queue(net); 530 priv->tx_skb = skb; 531 queue_work(priv->wq, &priv->tx_work); 532 533 return NETDEV_TX_OK; 534 } 535 536 static int mcp251x_do_set_mode(struct net_device *net, enum can_mode mode) 537 { 538 struct mcp251x_priv *priv = netdev_priv(net); 539 540 switch (mode) { 541 case CAN_MODE_START: 542 mcp251x_clean(net); 543 /* We have to delay work since SPI I/O may sleep */ 544 priv->can.state = CAN_STATE_ERROR_ACTIVE; 545 priv->restart_tx = 1; 546 if (priv->can.restart_ms == 0) 547 priv->after_suspend = AFTER_SUSPEND_RESTART; 548 queue_work(priv->wq, &priv->restart_work); 549 break; 550 default: 551 return -EOPNOTSUPP; 552 } 553 554 return 0; 555 } 556 557 static int mcp251x_set_normal_mode(struct spi_device *spi) 558 { 559 struct mcp251x_priv *priv = spi_get_drvdata(spi); 560 unsigned long timeout; 561 562 /* Enable interrupts */ 563 mcp251x_write_reg(spi, CANINTE, 564 CANINTE_ERRIE | CANINTE_TX2IE | CANINTE_TX1IE | 565 CANINTE_TX0IE | CANINTE_RX1IE | CANINTE_RX0IE); 566 567 if (priv->can.ctrlmode & CAN_CTRLMODE_LOOPBACK) { 568 /* Put device into loopback mode */ 569 mcp251x_write_reg(spi, CANCTRL, CANCTRL_REQOP_LOOPBACK); 570 } else if (priv->can.ctrlmode & CAN_CTRLMODE_LISTENONLY) { 571 /* Put device into listen-only mode */ 572 mcp251x_write_reg(spi, CANCTRL, CANCTRL_REQOP_LISTEN_ONLY); 573 } else { 574 /* Put device into normal mode */ 575 mcp251x_write_reg(spi, CANCTRL, CANCTRL_REQOP_NORMAL); 576 577 /* Wait for the device to enter normal mode */ 578 timeout = jiffies + HZ; 579 while (mcp251x_read_reg(spi, CANSTAT) & CANCTRL_REQOP_MASK) { 580 schedule(); 581 if (time_after(jiffies, timeout)) { 582 dev_err(&spi->dev, "MCP251x didn't" 583 " enter in normal mode\n"); 584 return -EBUSY; 585 } 586 } 587 } 588 priv->can.state = CAN_STATE_ERROR_ACTIVE; 589 return 0; 590 } 591 592 static int mcp251x_do_set_bittiming(struct net_device *net) 593 { 594 struct mcp251x_priv *priv = netdev_priv(net); 595 struct can_bittiming *bt = &priv->can.bittiming; 596 struct spi_device *spi = priv->spi; 597 598 mcp251x_write_reg(spi, CNF1, ((bt->sjw - 1) << CNF1_SJW_SHIFT) | 599 (bt->brp - 1)); 600 mcp251x_write_reg(spi, CNF2, CNF2_BTLMODE | 601 (priv->can.ctrlmode & CAN_CTRLMODE_3_SAMPLES ? 602 CNF2_SAM : 0) | 603 ((bt->phase_seg1 - 1) << CNF2_PS1_SHIFT) | 604 (bt->prop_seg - 1)); 605 mcp251x_write_bits(spi, CNF3, CNF3_PHSEG2_MASK, 606 (bt->phase_seg2 - 1)); 607 dev_dbg(&spi->dev, "CNF: 0x%02x 0x%02x 0x%02x\n", 608 mcp251x_read_reg(spi, CNF1), 609 mcp251x_read_reg(spi, CNF2), 610 mcp251x_read_reg(spi, CNF3)); 611 612 return 0; 613 } 614 615 static int mcp251x_setup(struct net_device *net, struct spi_device *spi) 616 { 617 mcp251x_do_set_bittiming(net); 618 619 mcp251x_write_reg(spi, RXBCTRL(0), 620 RXBCTRL_BUKT | RXBCTRL_RXM0 | RXBCTRL_RXM1); 621 mcp251x_write_reg(spi, RXBCTRL(1), 622 RXBCTRL_RXM0 | RXBCTRL_RXM1); 623 return 0; 624 } 625 626 static int mcp251x_hw_reset(struct spi_device *spi) 627 { 628 struct mcp251x_priv *priv = spi_get_drvdata(spi); 629 u8 reg; 630 int ret; 631 632 /* Wait for oscillator startup timer after power up */ 633 mdelay(MCP251X_OST_DELAY_MS); 634 635 priv->spi_tx_buf[0] = INSTRUCTION_RESET; 636 ret = mcp251x_spi_trans(spi, 1); 637 if (ret) 638 return ret; 639 640 /* Wait for oscillator startup timer after reset */ 641 mdelay(MCP251X_OST_DELAY_MS); 642 643 reg = mcp251x_read_reg(spi, CANSTAT); 644 if ((reg & CANCTRL_REQOP_MASK) != CANCTRL_REQOP_CONF) 645 return -ENODEV; 646 647 return 0; 648 } 649 650 static int mcp251x_hw_probe(struct spi_device *spi) 651 { 652 u8 ctrl; 653 int ret; 654 655 ret = mcp251x_hw_reset(spi); 656 if (ret) 657 return ret; 658 659 ctrl = mcp251x_read_reg(spi, CANCTRL); 660 661 dev_dbg(&spi->dev, "CANCTRL 0x%02x\n", ctrl); 662 663 /* Check for power up default value */ 664 if ((ctrl & 0x17) != 0x07) 665 return -ENODEV; 666 667 return 0; 668 } 669 670 static int mcp251x_power_enable(struct regulator *reg, int enable) 671 { 672 if (IS_ERR_OR_NULL(reg)) 673 return 0; 674 675 if (enable) 676 return regulator_enable(reg); 677 else 678 return regulator_disable(reg); 679 } 680 681 static void mcp251x_open_clean(struct net_device *net) 682 { 683 struct mcp251x_priv *priv = netdev_priv(net); 684 struct spi_device *spi = priv->spi; 685 686 free_irq(spi->irq, priv); 687 mcp251x_hw_sleep(spi); 688 mcp251x_power_enable(priv->transceiver, 0); 689 close_candev(net); 690 } 691 692 static int mcp251x_stop(struct net_device *net) 693 { 694 struct mcp251x_priv *priv = netdev_priv(net); 695 struct spi_device *spi = priv->spi; 696 697 close_candev(net); 698 699 priv->force_quit = 1; 700 free_irq(spi->irq, priv); 701 destroy_workqueue(priv->wq); 702 priv->wq = NULL; 703 704 mutex_lock(&priv->mcp_lock); 705 706 /* Disable and clear pending interrupts */ 707 mcp251x_write_reg(spi, CANINTE, 0x00); 708 mcp251x_write_reg(spi, CANINTF, 0x00); 709 710 mcp251x_write_reg(spi, TXBCTRL(0), 0); 711 mcp251x_clean(net); 712 713 mcp251x_hw_sleep(spi); 714 715 mcp251x_power_enable(priv->transceiver, 0); 716 717 priv->can.state = CAN_STATE_STOPPED; 718 719 mutex_unlock(&priv->mcp_lock); 720 721 can_led_event(net, CAN_LED_EVENT_STOP); 722 723 return 0; 724 } 725 726 static void mcp251x_error_skb(struct net_device *net, int can_id, int data1) 727 { 728 struct sk_buff *skb; 729 struct can_frame *frame; 730 731 skb = alloc_can_err_skb(net, &frame); 732 if (skb) { 733 frame->can_id |= can_id; 734 frame->data[1] = data1; 735 netif_rx_ni(skb); 736 } else { 737 netdev_err(net, "cannot allocate error skb\n"); 738 } 739 } 740 741 static void mcp251x_tx_work_handler(struct work_struct *ws) 742 { 743 struct mcp251x_priv *priv = container_of(ws, struct mcp251x_priv, 744 tx_work); 745 struct spi_device *spi = priv->spi; 746 struct net_device *net = priv->net; 747 struct can_frame *frame; 748 749 mutex_lock(&priv->mcp_lock); 750 if (priv->tx_skb) { 751 if (priv->can.state == CAN_STATE_BUS_OFF) { 752 mcp251x_clean(net); 753 } else { 754 frame = (struct can_frame *)priv->tx_skb->data; 755 756 if (frame->can_dlc > CAN_FRAME_MAX_DATA_LEN) 757 frame->can_dlc = CAN_FRAME_MAX_DATA_LEN; 758 mcp251x_hw_tx(spi, frame, 0); 759 priv->tx_len = 1 + frame->can_dlc; 760 can_put_echo_skb(priv->tx_skb, net, 0); 761 priv->tx_skb = NULL; 762 } 763 } 764 mutex_unlock(&priv->mcp_lock); 765 } 766 767 static void mcp251x_restart_work_handler(struct work_struct *ws) 768 { 769 struct mcp251x_priv *priv = container_of(ws, struct mcp251x_priv, 770 restart_work); 771 struct spi_device *spi = priv->spi; 772 struct net_device *net = priv->net; 773 774 mutex_lock(&priv->mcp_lock); 775 if (priv->after_suspend) { 776 mcp251x_hw_reset(spi); 777 mcp251x_setup(net, spi); 778 if (priv->after_suspend & AFTER_SUSPEND_RESTART) { 779 mcp251x_set_normal_mode(spi); 780 } else if (priv->after_suspend & AFTER_SUSPEND_UP) { 781 netif_device_attach(net); 782 mcp251x_clean(net); 783 mcp251x_set_normal_mode(spi); 784 netif_wake_queue(net); 785 } else { 786 mcp251x_hw_sleep(spi); 787 } 788 priv->after_suspend = 0; 789 priv->force_quit = 0; 790 } 791 792 if (priv->restart_tx) { 793 priv->restart_tx = 0; 794 mcp251x_write_reg(spi, TXBCTRL(0), 0); 795 mcp251x_clean(net); 796 netif_wake_queue(net); 797 mcp251x_error_skb(net, CAN_ERR_RESTARTED, 0); 798 } 799 mutex_unlock(&priv->mcp_lock); 800 } 801 802 static irqreturn_t mcp251x_can_ist(int irq, void *dev_id) 803 { 804 struct mcp251x_priv *priv = dev_id; 805 struct spi_device *spi = priv->spi; 806 struct net_device *net = priv->net; 807 808 mutex_lock(&priv->mcp_lock); 809 while (!priv->force_quit) { 810 enum can_state new_state; 811 u8 intf, eflag; 812 u8 clear_intf = 0; 813 int can_id = 0, data1 = 0; 814 815 mcp251x_read_2regs(spi, CANINTF, &intf, &eflag); 816 817 /* mask out flags we don't care about */ 818 intf &= CANINTF_RX | CANINTF_TX | CANINTF_ERR; 819 820 /* receive buffer 0 */ 821 if (intf & CANINTF_RX0IF) { 822 mcp251x_hw_rx(spi, 0); 823 /* 824 * Free one buffer ASAP 825 * (The MCP2515 does this automatically.) 826 */ 827 if (mcp251x_is_2510(spi)) 828 mcp251x_write_bits(spi, CANINTF, CANINTF_RX0IF, 0x00); 829 } 830 831 /* receive buffer 1 */ 832 if (intf & CANINTF_RX1IF) { 833 mcp251x_hw_rx(spi, 1); 834 /* the MCP2515 does this automatically */ 835 if (mcp251x_is_2510(spi)) 836 clear_intf |= CANINTF_RX1IF; 837 } 838 839 /* any error or tx interrupt we need to clear? */ 840 if (intf & (CANINTF_ERR | CANINTF_TX)) 841 clear_intf |= intf & (CANINTF_ERR | CANINTF_TX); 842 if (clear_intf) 843 mcp251x_write_bits(spi, CANINTF, clear_intf, 0x00); 844 845 if (eflag & (EFLG_RX0OVR | EFLG_RX1OVR)) 846 mcp251x_write_bits(spi, EFLG, eflag, 0x00); 847 848 /* Update can state */ 849 if (eflag & EFLG_TXBO) { 850 new_state = CAN_STATE_BUS_OFF; 851 can_id |= CAN_ERR_BUSOFF; 852 } else if (eflag & EFLG_TXEP) { 853 new_state = CAN_STATE_ERROR_PASSIVE; 854 can_id |= CAN_ERR_CRTL; 855 data1 |= CAN_ERR_CRTL_TX_PASSIVE; 856 } else if (eflag & EFLG_RXEP) { 857 new_state = CAN_STATE_ERROR_PASSIVE; 858 can_id |= CAN_ERR_CRTL; 859 data1 |= CAN_ERR_CRTL_RX_PASSIVE; 860 } else if (eflag & EFLG_TXWAR) { 861 new_state = CAN_STATE_ERROR_WARNING; 862 can_id |= CAN_ERR_CRTL; 863 data1 |= CAN_ERR_CRTL_TX_WARNING; 864 } else if (eflag & EFLG_RXWAR) { 865 new_state = CAN_STATE_ERROR_WARNING; 866 can_id |= CAN_ERR_CRTL; 867 data1 |= CAN_ERR_CRTL_RX_WARNING; 868 } else { 869 new_state = CAN_STATE_ERROR_ACTIVE; 870 } 871 872 /* Update can state statistics */ 873 switch (priv->can.state) { 874 case CAN_STATE_ERROR_ACTIVE: 875 if (new_state >= CAN_STATE_ERROR_WARNING && 876 new_state <= CAN_STATE_BUS_OFF) 877 priv->can.can_stats.error_warning++; 878 case CAN_STATE_ERROR_WARNING: /* fallthrough */ 879 if (new_state >= CAN_STATE_ERROR_PASSIVE && 880 new_state <= CAN_STATE_BUS_OFF) 881 priv->can.can_stats.error_passive++; 882 break; 883 default: 884 break; 885 } 886 priv->can.state = new_state; 887 888 if (intf & CANINTF_ERRIF) { 889 /* Handle overflow counters */ 890 if (eflag & (EFLG_RX0OVR | EFLG_RX1OVR)) { 891 if (eflag & EFLG_RX0OVR) { 892 net->stats.rx_over_errors++; 893 net->stats.rx_errors++; 894 } 895 if (eflag & EFLG_RX1OVR) { 896 net->stats.rx_over_errors++; 897 net->stats.rx_errors++; 898 } 899 can_id |= CAN_ERR_CRTL; 900 data1 |= CAN_ERR_CRTL_RX_OVERFLOW; 901 } 902 mcp251x_error_skb(net, can_id, data1); 903 } 904 905 if (priv->can.state == CAN_STATE_BUS_OFF) { 906 if (priv->can.restart_ms == 0) { 907 priv->force_quit = 1; 908 priv->can.can_stats.bus_off++; 909 can_bus_off(net); 910 mcp251x_hw_sleep(spi); 911 break; 912 } 913 } 914 915 if (intf == 0) 916 break; 917 918 if (intf & CANINTF_TX) { 919 net->stats.tx_packets++; 920 net->stats.tx_bytes += priv->tx_len - 1; 921 can_led_event(net, CAN_LED_EVENT_TX); 922 if (priv->tx_len) { 923 can_get_echo_skb(net, 0); 924 priv->tx_len = 0; 925 } 926 netif_wake_queue(net); 927 } 928 929 } 930 mutex_unlock(&priv->mcp_lock); 931 return IRQ_HANDLED; 932 } 933 934 static int mcp251x_open(struct net_device *net) 935 { 936 struct mcp251x_priv *priv = netdev_priv(net); 937 struct spi_device *spi = priv->spi; 938 unsigned long flags = IRQF_ONESHOT | IRQF_TRIGGER_FALLING; 939 int ret; 940 941 ret = open_candev(net); 942 if (ret) { 943 dev_err(&spi->dev, "unable to set initial baudrate!\n"); 944 return ret; 945 } 946 947 mutex_lock(&priv->mcp_lock); 948 mcp251x_power_enable(priv->transceiver, 1); 949 950 priv->force_quit = 0; 951 priv->tx_skb = NULL; 952 priv->tx_len = 0; 953 954 ret = request_threaded_irq(spi->irq, NULL, mcp251x_can_ist, 955 flags | IRQF_ONESHOT, DEVICE_NAME, priv); 956 if (ret) { 957 dev_err(&spi->dev, "failed to acquire irq %d\n", spi->irq); 958 mcp251x_power_enable(priv->transceiver, 0); 959 close_candev(net); 960 goto open_unlock; 961 } 962 963 priv->wq = alloc_workqueue("mcp251x_wq", WQ_FREEZABLE | WQ_MEM_RECLAIM, 964 0); 965 INIT_WORK(&priv->tx_work, mcp251x_tx_work_handler); 966 INIT_WORK(&priv->restart_work, mcp251x_restart_work_handler); 967 968 ret = mcp251x_hw_reset(spi); 969 if (ret) { 970 mcp251x_open_clean(net); 971 goto open_unlock; 972 } 973 ret = mcp251x_setup(net, spi); 974 if (ret) { 975 mcp251x_open_clean(net); 976 goto open_unlock; 977 } 978 ret = mcp251x_set_normal_mode(spi); 979 if (ret) { 980 mcp251x_open_clean(net); 981 goto open_unlock; 982 } 983 984 can_led_event(net, CAN_LED_EVENT_OPEN); 985 986 netif_wake_queue(net); 987 988 open_unlock: 989 mutex_unlock(&priv->mcp_lock); 990 return ret; 991 } 992 993 static const struct net_device_ops mcp251x_netdev_ops = { 994 .ndo_open = mcp251x_open, 995 .ndo_stop = mcp251x_stop, 996 .ndo_start_xmit = mcp251x_hard_start_xmit, 997 .ndo_change_mtu = can_change_mtu, 998 }; 999 1000 static const struct of_device_id mcp251x_of_match[] = { 1001 { 1002 .compatible = "microchip,mcp2510", 1003 .data = (void *)CAN_MCP251X_MCP2510, 1004 }, 1005 { 1006 .compatible = "microchip,mcp2515", 1007 .data = (void *)CAN_MCP251X_MCP2515, 1008 }, 1009 { } 1010 }; 1011 MODULE_DEVICE_TABLE(of, mcp251x_of_match); 1012 1013 static const struct spi_device_id mcp251x_id_table[] = { 1014 { 1015 .name = "mcp2510", 1016 .driver_data = (kernel_ulong_t)CAN_MCP251X_MCP2510, 1017 }, 1018 { 1019 .name = "mcp2515", 1020 .driver_data = (kernel_ulong_t)CAN_MCP251X_MCP2515, 1021 }, 1022 { } 1023 }; 1024 MODULE_DEVICE_TABLE(spi, mcp251x_id_table); 1025 1026 static int mcp251x_can_probe(struct spi_device *spi) 1027 { 1028 const struct of_device_id *of_id = of_match_device(mcp251x_of_match, 1029 &spi->dev); 1030 struct mcp251x_platform_data *pdata = dev_get_platdata(&spi->dev); 1031 struct net_device *net; 1032 struct mcp251x_priv *priv; 1033 struct clk *clk; 1034 int freq, ret; 1035 1036 clk = devm_clk_get(&spi->dev, NULL); 1037 if (IS_ERR(clk)) { 1038 if (pdata) 1039 freq = pdata->oscillator_frequency; 1040 else 1041 return PTR_ERR(clk); 1042 } else { 1043 freq = clk_get_rate(clk); 1044 } 1045 1046 /* Sanity check */ 1047 if (freq < 1000000 || freq > 25000000) 1048 return -ERANGE; 1049 1050 /* Allocate can/net device */ 1051 net = alloc_candev(sizeof(struct mcp251x_priv), TX_ECHO_SKB_MAX); 1052 if (!net) 1053 return -ENOMEM; 1054 1055 if (!IS_ERR(clk)) { 1056 ret = clk_prepare_enable(clk); 1057 if (ret) 1058 goto out_free; 1059 } 1060 1061 net->netdev_ops = &mcp251x_netdev_ops; 1062 net->flags |= IFF_ECHO; 1063 1064 priv = netdev_priv(net); 1065 priv->can.bittiming_const = &mcp251x_bittiming_const; 1066 priv->can.do_set_mode = mcp251x_do_set_mode; 1067 priv->can.clock.freq = freq / 2; 1068 priv->can.ctrlmode_supported = CAN_CTRLMODE_3_SAMPLES | 1069 CAN_CTRLMODE_LOOPBACK | CAN_CTRLMODE_LISTENONLY; 1070 if (of_id) 1071 priv->model = (enum mcp251x_model)of_id->data; 1072 else 1073 priv->model = spi_get_device_id(spi)->driver_data; 1074 priv->net = net; 1075 priv->clk = clk; 1076 1077 spi_set_drvdata(spi, priv); 1078 1079 /* Configure the SPI bus */ 1080 spi->bits_per_word = 8; 1081 if (mcp251x_is_2510(spi)) 1082 spi->max_speed_hz = spi->max_speed_hz ? : 5 * 1000 * 1000; 1083 else 1084 spi->max_speed_hz = spi->max_speed_hz ? : 10 * 1000 * 1000; 1085 ret = spi_setup(spi); 1086 if (ret) 1087 goto out_clk; 1088 1089 priv->power = devm_regulator_get_optional(&spi->dev, "vdd"); 1090 priv->transceiver = devm_regulator_get_optional(&spi->dev, "xceiver"); 1091 if ((PTR_ERR(priv->power) == -EPROBE_DEFER) || 1092 (PTR_ERR(priv->transceiver) == -EPROBE_DEFER)) { 1093 ret = -EPROBE_DEFER; 1094 goto out_clk; 1095 } 1096 1097 ret = mcp251x_power_enable(priv->power, 1); 1098 if (ret) 1099 goto out_clk; 1100 1101 priv->spi = spi; 1102 mutex_init(&priv->mcp_lock); 1103 1104 /* If requested, allocate DMA buffers */ 1105 if (mcp251x_enable_dma) { 1106 spi->dev.coherent_dma_mask = ~0; 1107 1108 /* 1109 * Minimum coherent DMA allocation is PAGE_SIZE, so allocate 1110 * that much and share it between Tx and Rx DMA buffers. 1111 */ 1112 priv->spi_tx_buf = dmam_alloc_coherent(&spi->dev, 1113 PAGE_SIZE, 1114 &priv->spi_tx_dma, 1115 GFP_DMA); 1116 1117 if (priv->spi_tx_buf) { 1118 priv->spi_rx_buf = (priv->spi_tx_buf + (PAGE_SIZE / 2)); 1119 priv->spi_rx_dma = (dma_addr_t)(priv->spi_tx_dma + 1120 (PAGE_SIZE / 2)); 1121 } else { 1122 /* Fall back to non-DMA */ 1123 mcp251x_enable_dma = 0; 1124 } 1125 } 1126 1127 /* Allocate non-DMA buffers */ 1128 if (!mcp251x_enable_dma) { 1129 priv->spi_tx_buf = devm_kzalloc(&spi->dev, SPI_TRANSFER_BUF_LEN, 1130 GFP_KERNEL); 1131 if (!priv->spi_tx_buf) { 1132 ret = -ENOMEM; 1133 goto error_probe; 1134 } 1135 priv->spi_rx_buf = devm_kzalloc(&spi->dev, SPI_TRANSFER_BUF_LEN, 1136 GFP_KERNEL); 1137 if (!priv->spi_rx_buf) { 1138 ret = -ENOMEM; 1139 goto error_probe; 1140 } 1141 } 1142 1143 SET_NETDEV_DEV(net, &spi->dev); 1144 1145 /* Here is OK to not lock the MCP, no one knows about it yet */ 1146 ret = mcp251x_hw_probe(spi); 1147 if (ret) { 1148 if (ret == -ENODEV) 1149 dev_err(&spi->dev, "Cannot initialize MCP%x. Wrong wiring?\n", priv->model); 1150 goto error_probe; 1151 } 1152 1153 mcp251x_hw_sleep(spi); 1154 1155 ret = register_candev(net); 1156 if (ret) 1157 goto error_probe; 1158 1159 devm_can_led_init(net); 1160 1161 netdev_info(net, "MCP%x successfully initialized.\n", priv->model); 1162 return 0; 1163 1164 error_probe: 1165 mcp251x_power_enable(priv->power, 0); 1166 1167 out_clk: 1168 if (!IS_ERR(clk)) 1169 clk_disable_unprepare(clk); 1170 1171 out_free: 1172 free_candev(net); 1173 1174 dev_err(&spi->dev, "Probe failed, err=%d\n", -ret); 1175 return ret; 1176 } 1177 1178 static int mcp251x_can_remove(struct spi_device *spi) 1179 { 1180 struct mcp251x_priv *priv = spi_get_drvdata(spi); 1181 struct net_device *net = priv->net; 1182 1183 unregister_candev(net); 1184 1185 mcp251x_power_enable(priv->power, 0); 1186 1187 if (!IS_ERR(priv->clk)) 1188 clk_disable_unprepare(priv->clk); 1189 1190 free_candev(net); 1191 1192 return 0; 1193 } 1194 1195 static int __maybe_unused mcp251x_can_suspend(struct device *dev) 1196 { 1197 struct spi_device *spi = to_spi_device(dev); 1198 struct mcp251x_priv *priv = spi_get_drvdata(spi); 1199 struct net_device *net = priv->net; 1200 1201 priv->force_quit = 1; 1202 disable_irq(spi->irq); 1203 /* 1204 * Note: at this point neither IST nor workqueues are running. 1205 * open/stop cannot be called anyway so locking is not needed 1206 */ 1207 if (netif_running(net)) { 1208 netif_device_detach(net); 1209 1210 mcp251x_hw_sleep(spi); 1211 mcp251x_power_enable(priv->transceiver, 0); 1212 priv->after_suspend = AFTER_SUSPEND_UP; 1213 } else { 1214 priv->after_suspend = AFTER_SUSPEND_DOWN; 1215 } 1216 1217 if (!IS_ERR_OR_NULL(priv->power)) { 1218 regulator_disable(priv->power); 1219 priv->after_suspend |= AFTER_SUSPEND_POWER; 1220 } 1221 1222 return 0; 1223 } 1224 1225 static int __maybe_unused mcp251x_can_resume(struct device *dev) 1226 { 1227 struct spi_device *spi = to_spi_device(dev); 1228 struct mcp251x_priv *priv = spi_get_drvdata(spi); 1229 1230 if (priv->after_suspend & AFTER_SUSPEND_POWER) 1231 mcp251x_power_enable(priv->power, 1); 1232 1233 if (priv->after_suspend & AFTER_SUSPEND_UP) { 1234 mcp251x_power_enable(priv->transceiver, 1); 1235 queue_work(priv->wq, &priv->restart_work); 1236 } else { 1237 priv->after_suspend = 0; 1238 } 1239 1240 priv->force_quit = 0; 1241 enable_irq(spi->irq); 1242 return 0; 1243 } 1244 1245 static SIMPLE_DEV_PM_OPS(mcp251x_can_pm_ops, mcp251x_can_suspend, 1246 mcp251x_can_resume); 1247 1248 static struct spi_driver mcp251x_can_driver = { 1249 .driver = { 1250 .name = DEVICE_NAME, 1251 .of_match_table = mcp251x_of_match, 1252 .pm = &mcp251x_can_pm_ops, 1253 }, 1254 .id_table = mcp251x_id_table, 1255 .probe = mcp251x_can_probe, 1256 .remove = mcp251x_can_remove, 1257 }; 1258 module_spi_driver(mcp251x_can_driver); 1259 1260 MODULE_AUTHOR("Chris Elston <celston@katalix.com>, " 1261 "Christian Pellegrin <chripell@evolware.org>"); 1262 MODULE_DESCRIPTION("Microchip 251x CAN driver"); 1263 MODULE_LICENSE("GPL v2"); 1264