1config CAN_SOFTING 2 tristate "Softing Gmbh CAN generic support" 3 depends on CAN_DEV 4 ---help--- 5 Support for CAN cards from Softing Gmbh & some cards 6 from Vector Gmbh. 7 Softing Gmbh CAN cards come with 1 or 2 physical busses. 8 Those cards typically use Dual Port RAM to communicate 9 with the host CPU. The interface is then identical for PCI 10 and PCMCIA cards. This driver operates on a platform device, 11 which has been created by softing_cs or softing_pci driver. 12 Warning: 13 The API of the card does not allow fine control per bus, but 14 controls the 2 busses on the card together. 15 As such, some actions (start/stop/busoff recovery) on 1 bus 16 must bring down the other bus too temporarily. 17 18config CAN_SOFTING_CS 19 tristate "Softing Gmbh CAN pcmcia cards" 20 depends on PCMCIA 21 select CAN_SOFTING 22 ---help--- 23 Support for PCMCIA cards from Softing Gmbh & some cards 24 from Vector Gmbh. 25 You need firmware for these, which you can get at 26 http://developer.berlios.de/projects/socketcan/ 27 This version of the driver is written against 28 firmware version 4.6 (softing-fw-4.6-binaries.tar.gz) 29 In order to use the card as CAN device, you need the Softing generic 30 support too. 31