1 /* 2 * sja1000.h - Philips SJA1000 network device driver 3 * 4 * Copyright (c) 2003 Matthias Brukner, Trajet Gmbh, Rebenring 33, 5 * 38106 Braunschweig, GERMANY 6 * 7 * Copyright (c) 2002-2007 Volkswagen Group Electronic Research 8 * All rights reserved. 9 * 10 * Redistribution and use in source and binary forms, with or without 11 * modification, are permitted provided that the following conditions 12 * are met: 13 * 1. Redistributions of source code must retain the above copyright 14 * notice, this list of conditions and the following disclaimer. 15 * 2. Redistributions in binary form must reproduce the above copyright 16 * notice, this list of conditions and the following disclaimer in the 17 * documentation and/or other materials provided with the distribution. 18 * 3. Neither the name of Volkswagen nor the names of its contributors 19 * may be used to endorse or promote products derived from this software 20 * without specific prior written permission. 21 * 22 * Alternatively, provided that this notice is retained in full, this 23 * software may be distributed under the terms of the GNU General 24 * Public License ("GPL") version 2, in which case the provisions of the 25 * GPL apply INSTEAD OF those given above. 26 * 27 * The provided data structures and external interfaces from this code 28 * are not restricted to be used by modules with a GPL compatible license. 29 * 30 * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS 31 * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT 32 * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR 33 * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT 34 * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, 35 * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT 36 * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, 37 * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY 38 * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT 39 * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE 40 * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH 41 * DAMAGE. 42 * 43 */ 44 45 #ifndef SJA1000_DEV_H 46 #define SJA1000_DEV_H 47 48 #include <linux/irqreturn.h> 49 #include <linux/can/dev.h> 50 #include <linux/can/platform/sja1000.h> 51 52 #define SJA1000_ECHO_SKB_MAX 1 /* the SJA1000 has one TX buffer object */ 53 54 #define SJA1000_MAX_IRQ 20 /* max. number of interrupts handled in ISR */ 55 56 /* SJA1000 registers - manual section 6.4 (Pelican Mode) */ 57 #define SJA1000_MOD 0x00 58 #define SJA1000_CMR 0x01 59 #define SJA1000_SR 0x02 60 #define SJA1000_IR 0x03 61 #define SJA1000_IER 0x04 62 #define SJA1000_ALC 0x0B 63 #define SJA1000_ECC 0x0C 64 #define SJA1000_EWL 0x0D 65 #define SJA1000_RXERR 0x0E 66 #define SJA1000_TXERR 0x0F 67 #define SJA1000_ACCC0 0x10 68 #define SJA1000_ACCC1 0x11 69 #define SJA1000_ACCC2 0x12 70 #define SJA1000_ACCC3 0x13 71 #define SJA1000_ACCM0 0x14 72 #define SJA1000_ACCM1 0x15 73 #define SJA1000_ACCM2 0x16 74 #define SJA1000_ACCM3 0x17 75 #define SJA1000_RMC 0x1D 76 #define SJA1000_RBSA 0x1E 77 78 /* Common registers - manual section 6.5 */ 79 #define SJA1000_BTR0 0x06 80 #define SJA1000_BTR1 0x07 81 #define SJA1000_OCR 0x08 82 #define SJA1000_CDR 0x1F 83 84 #define SJA1000_FI 0x10 85 #define SJA1000_SFF_BUF 0x13 86 #define SJA1000_EFF_BUF 0x15 87 88 #define SJA1000_FI_FF 0x80 89 #define SJA1000_FI_RTR 0x40 90 91 #define SJA1000_ID1 0x11 92 #define SJA1000_ID2 0x12 93 #define SJA1000_ID3 0x13 94 #define SJA1000_ID4 0x14 95 96 #define SJA1000_CAN_RAM 0x20 97 98 /* mode register */ 99 #define MOD_RM 0x01 100 #define MOD_LOM 0x02 101 #define MOD_STM 0x04 102 #define MOD_AFM 0x08 103 #define MOD_SM 0x10 104 105 /* commands */ 106 #define CMD_SRR 0x10 107 #define CMD_CDO 0x08 108 #define CMD_RRB 0x04 109 #define CMD_AT 0x02 110 #define CMD_TR 0x01 111 112 /* interrupt sources */ 113 #define IRQ_BEI 0x80 114 #define IRQ_ALI 0x40 115 #define IRQ_EPI 0x20 116 #define IRQ_WUI 0x10 117 #define IRQ_DOI 0x08 118 #define IRQ_EI 0x04 119 #define IRQ_TI 0x02 120 #define IRQ_RI 0x01 121 #define IRQ_ALL 0xFF 122 #define IRQ_OFF 0x00 123 124 /* status register content */ 125 #define SR_BS 0x80 126 #define SR_ES 0x40 127 #define SR_TS 0x20 128 #define SR_RS 0x10 129 #define SR_TCS 0x08 130 #define SR_TBS 0x04 131 #define SR_DOS 0x02 132 #define SR_RBS 0x01 133 134 #define SR_CRIT (SR_BS|SR_ES) 135 136 /* ECC register */ 137 #define ECC_SEG 0x1F 138 #define ECC_DIR 0x20 139 #define ECC_ERR 6 140 #define ECC_BIT 0x00 141 #define ECC_FORM 0x40 142 #define ECC_STUFF 0x80 143 #define ECC_MASK 0xc0 144 145 /* 146 * Flags for sja1000priv.flags 147 */ 148 #define SJA1000_CUSTOM_IRQ_HANDLER 0x1 149 150 /* 151 * SJA1000 private data structure 152 */ 153 struct sja1000_priv { 154 struct can_priv can; /* must be the first member */ 155 struct sk_buff *echo_skb; 156 157 /* the lower-layer is responsible for appropriate locking */ 158 u8 (*read_reg) (const struct sja1000_priv *priv, int reg); 159 void (*write_reg) (const struct sja1000_priv *priv, int reg, u8 val); 160 void (*pre_irq) (const struct sja1000_priv *priv); 161 void (*post_irq) (const struct sja1000_priv *priv); 162 163 void *priv; /* for board-specific data */ 164 struct net_device *dev; 165 166 void __iomem *reg_base; /* ioremap'ed address to registers */ 167 unsigned long irq_flags; /* for request_irq() */ 168 spinlock_t cmdreg_lock; /* lock for concurrent cmd register writes */ 169 170 u16 flags; /* custom mode flags */ 171 u8 ocr; /* output control register */ 172 u8 cdr; /* clock divider register */ 173 }; 174 175 struct net_device *alloc_sja1000dev(int sizeof_priv); 176 void free_sja1000dev(struct net_device *dev); 177 int register_sja1000dev(struct net_device *dev); 178 void unregister_sja1000dev(struct net_device *dev); 179 180 irqreturn_t sja1000_interrupt(int irq, void *dev_id); 181 182 #endif /* SJA1000_DEV_H */ 183