1 /* 2 * sja1000.c - Philips SJA1000 network device driver 3 * 4 * Copyright (c) 2003 Matthias Brukner, Trajet Gmbh, Rebenring 33, 5 * 38106 Braunschweig, GERMANY 6 * 7 * Copyright (c) 2002-2007 Volkswagen Group Electronic Research 8 * All rights reserved. 9 * 10 * Redistribution and use in source and binary forms, with or without 11 * modification, are permitted provided that the following conditions 12 * are met: 13 * 1. Redistributions of source code must retain the above copyright 14 * notice, this list of conditions and the following disclaimer. 15 * 2. Redistributions in binary form must reproduce the above copyright 16 * notice, this list of conditions and the following disclaimer in the 17 * documentation and/or other materials provided with the distribution. 18 * 3. Neither the name of Volkswagen nor the names of its contributors 19 * may be used to endorse or promote products derived from this software 20 * without specific prior written permission. 21 * 22 * Alternatively, provided that this notice is retained in full, this 23 * software may be distributed under the terms of the GNU General 24 * Public License ("GPL") version 2, in which case the provisions of the 25 * GPL apply INSTEAD OF those given above. 26 * 27 * The provided data structures and external interfaces from this code 28 * are not restricted to be used by modules with a GPL compatible license. 29 * 30 * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS 31 * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT 32 * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR 33 * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT 34 * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, 35 * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT 36 * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, 37 * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY 38 * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT 39 * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE 40 * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH 41 * DAMAGE. 42 * 43 */ 44 45 #include <linux/module.h> 46 #include <linux/init.h> 47 #include <linux/kernel.h> 48 #include <linux/sched.h> 49 #include <linux/types.h> 50 #include <linux/fcntl.h> 51 #include <linux/interrupt.h> 52 #include <linux/ptrace.h> 53 #include <linux/string.h> 54 #include <linux/errno.h> 55 #include <linux/netdevice.h> 56 #include <linux/if_arp.h> 57 #include <linux/if_ether.h> 58 #include <linux/skbuff.h> 59 #include <linux/delay.h> 60 61 #include <linux/can/dev.h> 62 #include <linux/can/error.h> 63 #include <linux/can/led.h> 64 65 #include "sja1000.h" 66 67 #define DRV_NAME "sja1000" 68 69 MODULE_AUTHOR("Oliver Hartkopp <oliver.hartkopp@volkswagen.de>"); 70 MODULE_LICENSE("Dual BSD/GPL"); 71 MODULE_DESCRIPTION(DRV_NAME "CAN netdevice driver"); 72 73 static const struct can_bittiming_const sja1000_bittiming_const = { 74 .name = DRV_NAME, 75 .tseg1_min = 1, 76 .tseg1_max = 16, 77 .tseg2_min = 1, 78 .tseg2_max = 8, 79 .sjw_max = 4, 80 .brp_min = 1, 81 .brp_max = 64, 82 .brp_inc = 1, 83 }; 84 85 static void sja1000_write_cmdreg(struct sja1000_priv *priv, u8 val) 86 { 87 unsigned long flags; 88 89 /* 90 * The command register needs some locking and time to settle 91 * the write_reg() operation - especially on SMP systems. 92 */ 93 spin_lock_irqsave(&priv->cmdreg_lock, flags); 94 priv->write_reg(priv, SJA1000_CMR, val); 95 priv->read_reg(priv, SJA1000_SR); 96 spin_unlock_irqrestore(&priv->cmdreg_lock, flags); 97 } 98 99 static int sja1000_is_absent(struct sja1000_priv *priv) 100 { 101 return (priv->read_reg(priv, SJA1000_MOD) == 0xFF); 102 } 103 104 static int sja1000_probe_chip(struct net_device *dev) 105 { 106 struct sja1000_priv *priv = netdev_priv(dev); 107 108 if (priv->reg_base && sja1000_is_absent(priv)) { 109 netdev_err(dev, "probing failed\n"); 110 return 0; 111 } 112 return -1; 113 } 114 115 static void set_reset_mode(struct net_device *dev) 116 { 117 struct sja1000_priv *priv = netdev_priv(dev); 118 unsigned char status = priv->read_reg(priv, SJA1000_MOD); 119 int i; 120 121 /* disable interrupts */ 122 priv->write_reg(priv, SJA1000_IER, IRQ_OFF); 123 124 for (i = 0; i < 100; i++) { 125 /* check reset bit */ 126 if (status & MOD_RM) { 127 priv->can.state = CAN_STATE_STOPPED; 128 return; 129 } 130 131 /* reset chip */ 132 priv->write_reg(priv, SJA1000_MOD, MOD_RM); 133 udelay(10); 134 status = priv->read_reg(priv, SJA1000_MOD); 135 } 136 137 netdev_err(dev, "setting SJA1000 into reset mode failed!\n"); 138 } 139 140 static void set_normal_mode(struct net_device *dev) 141 { 142 struct sja1000_priv *priv = netdev_priv(dev); 143 unsigned char status = priv->read_reg(priv, SJA1000_MOD); 144 u8 mod_reg_val = 0x00; 145 int i; 146 147 for (i = 0; i < 100; i++) { 148 /* check reset bit */ 149 if ((status & MOD_RM) == 0) { 150 priv->can.state = CAN_STATE_ERROR_ACTIVE; 151 /* enable interrupts */ 152 if (priv->can.ctrlmode & CAN_CTRLMODE_BERR_REPORTING) 153 priv->write_reg(priv, SJA1000_IER, IRQ_ALL); 154 else 155 priv->write_reg(priv, SJA1000_IER, 156 IRQ_ALL & ~IRQ_BEI); 157 return; 158 } 159 160 /* set chip to normal mode */ 161 if (priv->can.ctrlmode & CAN_CTRLMODE_LISTENONLY) 162 mod_reg_val |= MOD_LOM; 163 if (priv->can.ctrlmode & CAN_CTRLMODE_PRESUME_ACK) 164 mod_reg_val |= MOD_STM; 165 priv->write_reg(priv, SJA1000_MOD, mod_reg_val); 166 167 udelay(10); 168 169 status = priv->read_reg(priv, SJA1000_MOD); 170 } 171 172 netdev_err(dev, "setting SJA1000 into normal mode failed!\n"); 173 } 174 175 /* 176 * initialize SJA1000 chip: 177 * - reset chip 178 * - set output mode 179 * - set baudrate 180 * - enable interrupts 181 * - start operating mode 182 */ 183 static void chipset_init(struct net_device *dev) 184 { 185 struct sja1000_priv *priv = netdev_priv(dev); 186 187 /* set clock divider and output control register */ 188 priv->write_reg(priv, SJA1000_CDR, priv->cdr | CDR_PELICAN); 189 190 /* set acceptance filter (accept all) */ 191 priv->write_reg(priv, SJA1000_ACCC0, 0x00); 192 priv->write_reg(priv, SJA1000_ACCC1, 0x00); 193 priv->write_reg(priv, SJA1000_ACCC2, 0x00); 194 priv->write_reg(priv, SJA1000_ACCC3, 0x00); 195 196 priv->write_reg(priv, SJA1000_ACCM0, 0xFF); 197 priv->write_reg(priv, SJA1000_ACCM1, 0xFF); 198 priv->write_reg(priv, SJA1000_ACCM2, 0xFF); 199 priv->write_reg(priv, SJA1000_ACCM3, 0xFF); 200 201 priv->write_reg(priv, SJA1000_OCR, priv->ocr | OCR_MODE_NORMAL); 202 } 203 204 static void sja1000_start(struct net_device *dev) 205 { 206 struct sja1000_priv *priv = netdev_priv(dev); 207 208 /* leave reset mode */ 209 if (priv->can.state != CAN_STATE_STOPPED) 210 set_reset_mode(dev); 211 212 /* Initialize chip if uninitialized at this stage */ 213 if (!(priv->read_reg(priv, SJA1000_CDR) & CDR_PELICAN)) 214 chipset_init(dev); 215 216 /* Clear error counters and error code capture */ 217 priv->write_reg(priv, SJA1000_TXERR, 0x0); 218 priv->write_reg(priv, SJA1000_RXERR, 0x0); 219 priv->read_reg(priv, SJA1000_ECC); 220 221 /* leave reset mode */ 222 set_normal_mode(dev); 223 } 224 225 static int sja1000_set_mode(struct net_device *dev, enum can_mode mode) 226 { 227 switch (mode) { 228 case CAN_MODE_START: 229 sja1000_start(dev); 230 if (netif_queue_stopped(dev)) 231 netif_wake_queue(dev); 232 break; 233 234 default: 235 return -EOPNOTSUPP; 236 } 237 238 return 0; 239 } 240 241 static int sja1000_set_bittiming(struct net_device *dev) 242 { 243 struct sja1000_priv *priv = netdev_priv(dev); 244 struct can_bittiming *bt = &priv->can.bittiming; 245 u8 btr0, btr1; 246 247 btr0 = ((bt->brp - 1) & 0x3f) | (((bt->sjw - 1) & 0x3) << 6); 248 btr1 = ((bt->prop_seg + bt->phase_seg1 - 1) & 0xf) | 249 (((bt->phase_seg2 - 1) & 0x7) << 4); 250 if (priv->can.ctrlmode & CAN_CTRLMODE_3_SAMPLES) 251 btr1 |= 0x80; 252 253 netdev_info(dev, "setting BTR0=0x%02x BTR1=0x%02x\n", btr0, btr1); 254 255 priv->write_reg(priv, SJA1000_BTR0, btr0); 256 priv->write_reg(priv, SJA1000_BTR1, btr1); 257 258 return 0; 259 } 260 261 static int sja1000_get_berr_counter(const struct net_device *dev, 262 struct can_berr_counter *bec) 263 { 264 struct sja1000_priv *priv = netdev_priv(dev); 265 266 bec->txerr = priv->read_reg(priv, SJA1000_TXERR); 267 bec->rxerr = priv->read_reg(priv, SJA1000_RXERR); 268 269 return 0; 270 } 271 272 /* 273 * transmit a CAN message 274 * message layout in the sk_buff should be like this: 275 * xx xx xx xx ff ll 00 11 22 33 44 55 66 77 276 * [ can-id ] [flags] [len] [can data (up to 8 bytes] 277 */ 278 static netdev_tx_t sja1000_start_xmit(struct sk_buff *skb, 279 struct net_device *dev) 280 { 281 struct sja1000_priv *priv = netdev_priv(dev); 282 struct can_frame *cf = (struct can_frame *)skb->data; 283 uint8_t fi; 284 uint8_t dlc; 285 canid_t id; 286 uint8_t dreg; 287 u8 cmd_reg_val = 0x00; 288 int i; 289 290 if (can_dropped_invalid_skb(dev, skb)) 291 return NETDEV_TX_OK; 292 293 netif_stop_queue(dev); 294 295 fi = dlc = cf->can_dlc; 296 id = cf->can_id; 297 298 if (id & CAN_RTR_FLAG) 299 fi |= SJA1000_FI_RTR; 300 301 if (id & CAN_EFF_FLAG) { 302 fi |= SJA1000_FI_FF; 303 dreg = SJA1000_EFF_BUF; 304 priv->write_reg(priv, SJA1000_FI, fi); 305 priv->write_reg(priv, SJA1000_ID1, (id & 0x1fe00000) >> 21); 306 priv->write_reg(priv, SJA1000_ID2, (id & 0x001fe000) >> 13); 307 priv->write_reg(priv, SJA1000_ID3, (id & 0x00001fe0) >> 5); 308 priv->write_reg(priv, SJA1000_ID4, (id & 0x0000001f) << 3); 309 } else { 310 dreg = SJA1000_SFF_BUF; 311 priv->write_reg(priv, SJA1000_FI, fi); 312 priv->write_reg(priv, SJA1000_ID1, (id & 0x000007f8) >> 3); 313 priv->write_reg(priv, SJA1000_ID2, (id & 0x00000007) << 5); 314 } 315 316 for (i = 0; i < dlc; i++) 317 priv->write_reg(priv, dreg++, cf->data[i]); 318 319 can_put_echo_skb(skb, dev, 0); 320 321 if (priv->can.ctrlmode & CAN_CTRLMODE_ONE_SHOT) 322 cmd_reg_val |= CMD_AT; 323 324 if (priv->can.ctrlmode & CAN_CTRLMODE_LOOPBACK) 325 cmd_reg_val |= CMD_SRR; 326 else 327 cmd_reg_val |= CMD_TR; 328 329 sja1000_write_cmdreg(priv, cmd_reg_val); 330 331 return NETDEV_TX_OK; 332 } 333 334 static void sja1000_rx(struct net_device *dev) 335 { 336 struct sja1000_priv *priv = netdev_priv(dev); 337 struct net_device_stats *stats = &dev->stats; 338 struct can_frame *cf; 339 struct sk_buff *skb; 340 uint8_t fi; 341 uint8_t dreg; 342 canid_t id; 343 int i; 344 345 /* create zero'ed CAN frame buffer */ 346 skb = alloc_can_skb(dev, &cf); 347 if (skb == NULL) 348 return; 349 350 fi = priv->read_reg(priv, SJA1000_FI); 351 352 if (fi & SJA1000_FI_FF) { 353 /* extended frame format (EFF) */ 354 dreg = SJA1000_EFF_BUF; 355 id = (priv->read_reg(priv, SJA1000_ID1) << 21) 356 | (priv->read_reg(priv, SJA1000_ID2) << 13) 357 | (priv->read_reg(priv, SJA1000_ID3) << 5) 358 | (priv->read_reg(priv, SJA1000_ID4) >> 3); 359 id |= CAN_EFF_FLAG; 360 } else { 361 /* standard frame format (SFF) */ 362 dreg = SJA1000_SFF_BUF; 363 id = (priv->read_reg(priv, SJA1000_ID1) << 3) 364 | (priv->read_reg(priv, SJA1000_ID2) >> 5); 365 } 366 367 cf->can_dlc = get_can_dlc(fi & 0x0F); 368 if (fi & SJA1000_FI_RTR) { 369 id |= CAN_RTR_FLAG; 370 } else { 371 for (i = 0; i < cf->can_dlc; i++) 372 cf->data[i] = priv->read_reg(priv, dreg++); 373 } 374 375 cf->can_id = id; 376 377 /* release receive buffer */ 378 sja1000_write_cmdreg(priv, CMD_RRB); 379 380 netif_rx(skb); 381 382 stats->rx_packets++; 383 stats->rx_bytes += cf->can_dlc; 384 385 can_led_event(dev, CAN_LED_EVENT_RX); 386 } 387 388 static int sja1000_err(struct net_device *dev, uint8_t isrc, uint8_t status) 389 { 390 struct sja1000_priv *priv = netdev_priv(dev); 391 struct net_device_stats *stats = &dev->stats; 392 struct can_frame *cf; 393 struct sk_buff *skb; 394 enum can_state state = priv->can.state; 395 enum can_state rx_state, tx_state; 396 unsigned int rxerr, txerr; 397 uint8_t ecc, alc; 398 399 skb = alloc_can_err_skb(dev, &cf); 400 if (skb == NULL) 401 return -ENOMEM; 402 403 txerr = priv->read_reg(priv, SJA1000_TXERR); 404 rxerr = priv->read_reg(priv, SJA1000_RXERR); 405 406 cf->data[6] = txerr; 407 cf->data[7] = rxerr; 408 409 if (isrc & IRQ_DOI) { 410 /* data overrun interrupt */ 411 netdev_dbg(dev, "data overrun interrupt\n"); 412 cf->can_id |= CAN_ERR_CRTL; 413 cf->data[1] = CAN_ERR_CRTL_RX_OVERFLOW; 414 stats->rx_over_errors++; 415 stats->rx_errors++; 416 sja1000_write_cmdreg(priv, CMD_CDO); /* clear bit */ 417 } 418 419 if (isrc & IRQ_EI) { 420 /* error warning interrupt */ 421 netdev_dbg(dev, "error warning interrupt\n"); 422 423 if (status & SR_BS) 424 state = CAN_STATE_BUS_OFF; 425 else if (status & SR_ES) 426 state = CAN_STATE_ERROR_WARNING; 427 else 428 state = CAN_STATE_ERROR_ACTIVE; 429 } 430 if (isrc & IRQ_BEI) { 431 /* bus error interrupt */ 432 priv->can.can_stats.bus_error++; 433 stats->rx_errors++; 434 435 ecc = priv->read_reg(priv, SJA1000_ECC); 436 437 cf->can_id |= CAN_ERR_PROT | CAN_ERR_BUSERROR; 438 439 switch (ecc & ECC_MASK) { 440 case ECC_BIT: 441 cf->data[2] |= CAN_ERR_PROT_BIT; 442 break; 443 case ECC_FORM: 444 cf->data[2] |= CAN_ERR_PROT_FORM; 445 break; 446 case ECC_STUFF: 447 cf->data[2] |= CAN_ERR_PROT_STUFF; 448 break; 449 default: 450 cf->data[2] |= CAN_ERR_PROT_UNSPEC; 451 cf->data[3] = ecc & ECC_SEG; 452 break; 453 } 454 /* Error occurred during transmission? */ 455 if ((ecc & ECC_DIR) == 0) 456 cf->data[2] |= CAN_ERR_PROT_TX; 457 } 458 if (isrc & IRQ_EPI) { 459 /* error passive interrupt */ 460 netdev_dbg(dev, "error passive interrupt\n"); 461 462 if (state == CAN_STATE_ERROR_PASSIVE) 463 state = CAN_STATE_ERROR_WARNING; 464 else 465 state = CAN_STATE_ERROR_PASSIVE; 466 } 467 if (isrc & IRQ_ALI) { 468 /* arbitration lost interrupt */ 469 netdev_dbg(dev, "arbitration lost interrupt\n"); 470 alc = priv->read_reg(priv, SJA1000_ALC); 471 priv->can.can_stats.arbitration_lost++; 472 stats->tx_errors++; 473 cf->can_id |= CAN_ERR_LOSTARB; 474 cf->data[0] = alc & 0x1f; 475 } 476 477 if (state != priv->can.state) { 478 tx_state = txerr >= rxerr ? state : 0; 479 rx_state = txerr <= rxerr ? state : 0; 480 481 can_change_state(dev, cf, tx_state, rx_state); 482 483 if(state == CAN_STATE_BUS_OFF) 484 can_bus_off(dev); 485 } 486 487 netif_rx(skb); 488 489 stats->rx_packets++; 490 stats->rx_bytes += cf->can_dlc; 491 492 return 0; 493 } 494 495 irqreturn_t sja1000_interrupt(int irq, void *dev_id) 496 { 497 struct net_device *dev = (struct net_device *)dev_id; 498 struct sja1000_priv *priv = netdev_priv(dev); 499 struct net_device_stats *stats = &dev->stats; 500 uint8_t isrc, status; 501 int n = 0; 502 503 if (priv->pre_irq) 504 priv->pre_irq(priv); 505 506 /* Shared interrupts and IRQ off? */ 507 if (priv->read_reg(priv, SJA1000_IER) == IRQ_OFF) 508 goto out; 509 510 while ((isrc = priv->read_reg(priv, SJA1000_IR)) && 511 (n < SJA1000_MAX_IRQ)) { 512 513 status = priv->read_reg(priv, SJA1000_SR); 514 /* check for absent controller due to hw unplug */ 515 if (status == 0xFF && sja1000_is_absent(priv)) 516 goto out; 517 518 if (isrc & IRQ_WUI) 519 netdev_warn(dev, "wakeup interrupt\n"); 520 521 if (isrc & IRQ_TI) { 522 /* transmission buffer released */ 523 if (priv->can.ctrlmode & CAN_CTRLMODE_ONE_SHOT && 524 !(status & SR_TCS)) { 525 stats->tx_errors++; 526 can_free_echo_skb(dev, 0); 527 } else { 528 /* transmission complete */ 529 stats->tx_bytes += 530 priv->read_reg(priv, SJA1000_FI) & 0xf; 531 stats->tx_packets++; 532 can_get_echo_skb(dev, 0); 533 } 534 netif_wake_queue(dev); 535 can_led_event(dev, CAN_LED_EVENT_TX); 536 } 537 if (isrc & IRQ_RI) { 538 /* receive interrupt */ 539 while (status & SR_RBS) { 540 sja1000_rx(dev); 541 status = priv->read_reg(priv, SJA1000_SR); 542 /* check for absent controller */ 543 if (status == 0xFF && sja1000_is_absent(priv)) 544 goto out; 545 } 546 } 547 if (isrc & (IRQ_DOI | IRQ_EI | IRQ_BEI | IRQ_EPI | IRQ_ALI)) { 548 /* error interrupt */ 549 if (sja1000_err(dev, isrc, status)) 550 break; 551 } 552 n++; 553 } 554 out: 555 if (priv->post_irq) 556 priv->post_irq(priv); 557 558 if (n >= SJA1000_MAX_IRQ) 559 netdev_dbg(dev, "%d messages handled in ISR", n); 560 561 return (n) ? IRQ_HANDLED : IRQ_NONE; 562 } 563 EXPORT_SYMBOL_GPL(sja1000_interrupt); 564 565 static int sja1000_open(struct net_device *dev) 566 { 567 struct sja1000_priv *priv = netdev_priv(dev); 568 int err; 569 570 /* set chip into reset mode */ 571 set_reset_mode(dev); 572 573 /* common open */ 574 err = open_candev(dev); 575 if (err) 576 return err; 577 578 /* register interrupt handler, if not done by the device driver */ 579 if (!(priv->flags & SJA1000_CUSTOM_IRQ_HANDLER)) { 580 err = request_irq(dev->irq, sja1000_interrupt, priv->irq_flags, 581 dev->name, (void *)dev); 582 if (err) { 583 close_candev(dev); 584 return -EAGAIN; 585 } 586 } 587 588 /* init and start chi */ 589 sja1000_start(dev); 590 591 can_led_event(dev, CAN_LED_EVENT_OPEN); 592 593 netif_start_queue(dev); 594 595 return 0; 596 } 597 598 static int sja1000_close(struct net_device *dev) 599 { 600 struct sja1000_priv *priv = netdev_priv(dev); 601 602 netif_stop_queue(dev); 603 set_reset_mode(dev); 604 605 if (!(priv->flags & SJA1000_CUSTOM_IRQ_HANDLER)) 606 free_irq(dev->irq, (void *)dev); 607 608 close_candev(dev); 609 610 can_led_event(dev, CAN_LED_EVENT_STOP); 611 612 return 0; 613 } 614 615 struct net_device *alloc_sja1000dev(int sizeof_priv) 616 { 617 struct net_device *dev; 618 struct sja1000_priv *priv; 619 620 dev = alloc_candev(sizeof(struct sja1000_priv) + sizeof_priv, 621 SJA1000_ECHO_SKB_MAX); 622 if (!dev) 623 return NULL; 624 625 priv = netdev_priv(dev); 626 627 priv->dev = dev; 628 priv->can.bittiming_const = &sja1000_bittiming_const; 629 priv->can.do_set_bittiming = sja1000_set_bittiming; 630 priv->can.do_set_mode = sja1000_set_mode; 631 priv->can.do_get_berr_counter = sja1000_get_berr_counter; 632 priv->can.ctrlmode_supported = CAN_CTRLMODE_LOOPBACK | 633 CAN_CTRLMODE_LISTENONLY | 634 CAN_CTRLMODE_3_SAMPLES | 635 CAN_CTRLMODE_ONE_SHOT | 636 CAN_CTRLMODE_BERR_REPORTING | 637 CAN_CTRLMODE_PRESUME_ACK; 638 639 spin_lock_init(&priv->cmdreg_lock); 640 641 if (sizeof_priv) 642 priv->priv = (void *)priv + sizeof(struct sja1000_priv); 643 644 return dev; 645 } 646 EXPORT_SYMBOL_GPL(alloc_sja1000dev); 647 648 void free_sja1000dev(struct net_device *dev) 649 { 650 free_candev(dev); 651 } 652 EXPORT_SYMBOL_GPL(free_sja1000dev); 653 654 static const struct net_device_ops sja1000_netdev_ops = { 655 .ndo_open = sja1000_open, 656 .ndo_stop = sja1000_close, 657 .ndo_start_xmit = sja1000_start_xmit, 658 .ndo_change_mtu = can_change_mtu, 659 }; 660 661 int register_sja1000dev(struct net_device *dev) 662 { 663 int ret; 664 665 if (!sja1000_probe_chip(dev)) 666 return -ENODEV; 667 668 dev->flags |= IFF_ECHO; /* we support local echo */ 669 dev->netdev_ops = &sja1000_netdev_ops; 670 671 set_reset_mode(dev); 672 chipset_init(dev); 673 674 ret = register_candev(dev); 675 676 if (!ret) 677 devm_can_led_init(dev); 678 679 return ret; 680 } 681 EXPORT_SYMBOL_GPL(register_sja1000dev); 682 683 void unregister_sja1000dev(struct net_device *dev) 684 { 685 set_reset_mode(dev); 686 unregister_candev(dev); 687 } 688 EXPORT_SYMBOL_GPL(unregister_sja1000dev); 689 690 static __init int sja1000_init(void) 691 { 692 printk(KERN_INFO "%s CAN netdevice driver\n", DRV_NAME); 693 694 return 0; 695 } 696 697 module_init(sja1000_init); 698 699 static __exit void sja1000_exit(void) 700 { 701 printk(KERN_INFO "%s: driver removed\n", DRV_NAME); 702 } 703 704 module_exit(sja1000_exit); 705