1 // SPDX-License-Identifier: GPL-2.0-only 2 /* 3 * Copyright (C) 2007, 2011 Wolfgang Grandegger <wg@grandegger.com> 4 * Copyright (C) 2012 Stephane Grosjean <s.grosjean@peak-system.com> 5 * 6 * Derived from the PCAN project file driver/src/pcan_pci.c: 7 * 8 * Copyright (C) 2001-2006 PEAK System-Technik GmbH 9 */ 10 11 #include <linux/kernel.h> 12 #include <linux/module.h> 13 #include <linux/interrupt.h> 14 #include <linux/netdevice.h> 15 #include <linux/delay.h> 16 #include <linux/pci.h> 17 #include <linux/io.h> 18 #include <linux/i2c.h> 19 #include <linux/i2c-algo-bit.h> 20 #include <linux/can.h> 21 #include <linux/can/dev.h> 22 23 #include "sja1000.h" 24 25 MODULE_AUTHOR("Stephane Grosjean <s.grosjean@peak-system.com>"); 26 MODULE_DESCRIPTION("Socket-CAN driver for PEAK PCAN PCI family cards"); 27 MODULE_LICENSE("GPL v2"); 28 29 #define DRV_NAME "peak_pci" 30 31 /* FPGA cards FW version registers */ 32 #define PEAK_VER_REG1 0x40 33 #define PEAK_VER_REG2 0x44 34 35 struct peak_pciec_card; 36 struct peak_pci_chan { 37 void __iomem *cfg_base; /* Common for all channels */ 38 struct net_device *prev_dev; /* Chain of network devices */ 39 u16 icr_mask; /* Interrupt mask for fast ack */ 40 struct peak_pciec_card *pciec_card; /* only for PCIeC LEDs */ 41 }; 42 43 #define PEAK_PCI_CAN_CLOCK (16000000 / 2) 44 45 #define PEAK_PCI_CDR (CDR_CBP | CDR_CLKOUT_MASK) 46 #define PEAK_PCI_OCR OCR_TX0_PUSHPULL 47 48 /* Important PITA registers */ 49 #define PITA_ICR 0x00 /* Interrupt control register */ 50 #define PITA_GPIOICR 0x18 /* GPIO interface control register */ 51 #define PITA_MISC 0x1C /* Miscellaneous register */ 52 53 #define PEAK_PCI_CFG_SIZE 0x1000 /* Size of the config PCI bar */ 54 #define PEAK_PCI_CHAN_SIZE 0x0400 /* Size used by the channel */ 55 56 #define PEAK_PCI_VENDOR_ID 0x001C /* The PCI device and vendor IDs */ 57 #define PEAK_PCI_DEVICE_ID 0x0001 /* for PCI/PCIe slot cards */ 58 #define PEAK_PCIEC_DEVICE_ID 0x0002 /* for ExpressCard slot cards */ 59 #define PEAK_PCIE_DEVICE_ID 0x0003 /* for nextgen PCIe slot cards */ 60 #define PEAK_CPCI_DEVICE_ID 0x0004 /* for nextgen cPCI slot cards */ 61 #define PEAK_MPCI_DEVICE_ID 0x0005 /* for nextgen miniPCI slot cards */ 62 #define PEAK_PC_104P_DEVICE_ID 0x0006 /* PCAN-PC/104+ cards */ 63 #define PEAK_PCI_104E_DEVICE_ID 0x0007 /* PCAN-PCI/104 Express cards */ 64 #define PEAK_MPCIE_DEVICE_ID 0x0008 /* The miniPCIe slot cards */ 65 #define PEAK_PCIE_OEM_ID 0x0009 /* PCAN-PCI Express OEM */ 66 #define PEAK_PCIEC34_DEVICE_ID 0x000A /* PCAN-PCI Express 34 (one channel) */ 67 68 #define PEAK_PCI_CHAN_MAX 4 69 70 static const u16 peak_pci_icr_masks[PEAK_PCI_CHAN_MAX] = { 71 0x02, 0x01, 0x40, 0x80 72 }; 73 74 static const struct pci_device_id peak_pci_tbl[] = { 75 { 76 PEAK_PCI_VENDOR_ID, PEAK_PCI_DEVICE_ID, PCI_ANY_ID, PCI_ANY_ID, 77 .driver_data = (kernel_ulong_t)"PCAN-PCI", 78 }, { 79 PEAK_PCI_VENDOR_ID, PEAK_PCIE_DEVICE_ID, PCI_ANY_ID, PCI_ANY_ID, 80 .driver_data = (kernel_ulong_t)"PCAN-PCI Express", 81 }, { 82 PEAK_PCI_VENDOR_ID, PEAK_MPCI_DEVICE_ID, PCI_ANY_ID, PCI_ANY_ID, 83 .driver_data = (kernel_ulong_t)"PCAN-miniPCI", 84 }, { 85 PEAK_PCI_VENDOR_ID, PEAK_MPCIE_DEVICE_ID, PCI_ANY_ID, PCI_ANY_ID, 86 .driver_data = (kernel_ulong_t)"PCAN-miniPCIe", 87 }, { 88 PEAK_PCI_VENDOR_ID, PEAK_PC_104P_DEVICE_ID, PCI_ANY_ID, PCI_ANY_ID, 89 .driver_data = (kernel_ulong_t)"PCAN-PC/104-Plus Quad", 90 }, { 91 PEAK_PCI_VENDOR_ID, PEAK_PCI_104E_DEVICE_ID, PCI_ANY_ID, PCI_ANY_ID, 92 .driver_data = (kernel_ulong_t)"PCAN-PCI/104-Express", 93 }, { 94 PEAK_PCI_VENDOR_ID, PEAK_CPCI_DEVICE_ID, PCI_ANY_ID, PCI_ANY_ID, 95 .driver_data = (kernel_ulong_t)"PCAN-cPCI", 96 }, { 97 PEAK_PCI_VENDOR_ID, PEAK_PCIE_OEM_ID, PCI_ANY_ID, PCI_ANY_ID, 98 .driver_data = (kernel_ulong_t)"PCAN-Chip PCIe", 99 }, 100 #ifdef CONFIG_CAN_PEAK_PCIEC 101 { 102 PEAK_PCI_VENDOR_ID, PEAK_PCIEC_DEVICE_ID, PCI_ANY_ID, PCI_ANY_ID, 103 .driver_data = (kernel_ulong_t)"PCAN-ExpressCard", 104 }, { 105 PEAK_PCI_VENDOR_ID, PEAK_PCIEC34_DEVICE_ID, PCI_ANY_ID, PCI_ANY_ID, 106 .driver_data = (kernel_ulong_t)"PCAN-ExpressCard 34", 107 }, 108 #endif 109 { /* sentinel */ } 110 }; 111 112 MODULE_DEVICE_TABLE(pci, peak_pci_tbl); 113 114 #ifdef CONFIG_CAN_PEAK_PCIEC 115 /* PCAN-ExpressCard needs I2C bit-banging configuration option. */ 116 117 /* GPIOICR byte access offsets */ 118 #define PITA_GPOUT 0x18 /* GPx output value */ 119 #define PITA_GPIN 0x19 /* GPx input value */ 120 #define PITA_GPOEN 0x1A /* configure GPx as output pin */ 121 122 /* I2C GP bits */ 123 #define PITA_GPIN_SCL 0x01 /* Serial Clock Line */ 124 #define PITA_GPIN_SDA 0x04 /* Serial DAta line */ 125 126 #define PCA9553_1_SLAVEADDR (0xC4 >> 1) 127 128 /* PCA9553 LS0 fields values */ 129 enum { 130 PCA9553_LOW, 131 PCA9553_HIGHZ, 132 PCA9553_PWM0, 133 PCA9553_PWM1 134 }; 135 136 /* LEDs control */ 137 #define PCA9553_ON PCA9553_LOW 138 #define PCA9553_OFF PCA9553_HIGHZ 139 #define PCA9553_SLOW PCA9553_PWM0 140 #define PCA9553_FAST PCA9553_PWM1 141 142 #define PCA9553_LED(c) (1 << (c)) 143 #define PCA9553_LED_STATE(s, c) ((s) << ((c) << 1)) 144 145 #define PCA9553_LED_ON(c) PCA9553_LED_STATE(PCA9553_ON, c) 146 #define PCA9553_LED_OFF(c) PCA9553_LED_STATE(PCA9553_OFF, c) 147 #define PCA9553_LED_SLOW(c) PCA9553_LED_STATE(PCA9553_SLOW, c) 148 #define PCA9553_LED_FAST(c) PCA9553_LED_STATE(PCA9553_FAST, c) 149 #define PCA9553_LED_MASK(c) PCA9553_LED_STATE(0x03, c) 150 151 #define PCA9553_LED_OFF_ALL (PCA9553_LED_OFF(0) | PCA9553_LED_OFF(1)) 152 153 #define PCA9553_LS0_INIT 0x40 /* initial value (!= from 0x00) */ 154 155 struct peak_pciec_chan { 156 struct net_device *netdev; 157 unsigned long prev_rx_bytes; 158 unsigned long prev_tx_bytes; 159 }; 160 161 struct peak_pciec_card { 162 void __iomem *cfg_base; /* Common for all channels */ 163 void __iomem *reg_base; /* first channel base address */ 164 u8 led_cache; /* leds state cache */ 165 166 /* PCIExpressCard i2c data */ 167 struct i2c_algo_bit_data i2c_bit; 168 struct i2c_adapter led_chip; 169 struct delayed_work led_work; /* led delayed work */ 170 int chan_count; 171 struct peak_pciec_chan channel[PEAK_PCI_CHAN_MAX]; 172 }; 173 174 /* "normal" pci register write callback is overloaded for leds control */ 175 static void peak_pci_write_reg(const struct sja1000_priv *priv, 176 int port, u8 val); 177 178 static inline void pita_set_scl_highz(struct peak_pciec_card *card) 179 { 180 u8 gp_outen = readb(card->cfg_base + PITA_GPOEN) & ~PITA_GPIN_SCL; 181 182 writeb(gp_outen, card->cfg_base + PITA_GPOEN); 183 } 184 185 static inline void pita_set_sda_highz(struct peak_pciec_card *card) 186 { 187 u8 gp_outen = readb(card->cfg_base + PITA_GPOEN) & ~PITA_GPIN_SDA; 188 189 writeb(gp_outen, card->cfg_base + PITA_GPOEN); 190 } 191 192 static void peak_pciec_init_pita_gpio(struct peak_pciec_card *card) 193 { 194 /* raise SCL & SDA GPIOs to high-Z */ 195 pita_set_scl_highz(card); 196 pita_set_sda_highz(card); 197 } 198 199 static void pita_setsda(void *data, int state) 200 { 201 struct peak_pciec_card *card = (struct peak_pciec_card *)data; 202 u8 gp_out, gp_outen; 203 204 /* set output sda always to 0 */ 205 gp_out = readb(card->cfg_base + PITA_GPOUT) & ~PITA_GPIN_SDA; 206 writeb(gp_out, card->cfg_base + PITA_GPOUT); 207 208 /* control output sda with GPOEN */ 209 gp_outen = readb(card->cfg_base + PITA_GPOEN); 210 if (state) 211 gp_outen &= ~PITA_GPIN_SDA; 212 else 213 gp_outen |= PITA_GPIN_SDA; 214 215 writeb(gp_outen, card->cfg_base + PITA_GPOEN); 216 } 217 218 static void pita_setscl(void *data, int state) 219 { 220 struct peak_pciec_card *card = (struct peak_pciec_card *)data; 221 u8 gp_out, gp_outen; 222 223 /* set output scl always to 0 */ 224 gp_out = readb(card->cfg_base + PITA_GPOUT) & ~PITA_GPIN_SCL; 225 writeb(gp_out, card->cfg_base + PITA_GPOUT); 226 227 /* control output scl with GPOEN */ 228 gp_outen = readb(card->cfg_base + PITA_GPOEN); 229 if (state) 230 gp_outen &= ~PITA_GPIN_SCL; 231 else 232 gp_outen |= PITA_GPIN_SCL; 233 234 writeb(gp_outen, card->cfg_base + PITA_GPOEN); 235 } 236 237 static int pita_getsda(void *data) 238 { 239 struct peak_pciec_card *card = (struct peak_pciec_card *)data; 240 241 /* set tristate */ 242 pita_set_sda_highz(card); 243 244 return (readb(card->cfg_base + PITA_GPIN) & PITA_GPIN_SDA) ? 1 : 0; 245 } 246 247 static int pita_getscl(void *data) 248 { 249 struct peak_pciec_card *card = (struct peak_pciec_card *)data; 250 251 /* set tristate */ 252 pita_set_scl_highz(card); 253 254 return (readb(card->cfg_base + PITA_GPIN) & PITA_GPIN_SCL) ? 1 : 0; 255 } 256 257 /* write commands to the LED chip though the I2C-bus of the PCAN-PCIeC */ 258 static int peak_pciec_write_pca9553(struct peak_pciec_card *card, 259 u8 offset, u8 data) 260 { 261 u8 buffer[2] = { 262 offset, 263 data 264 }; 265 struct i2c_msg msg = { 266 .addr = PCA9553_1_SLAVEADDR, 267 .len = 2, 268 .buf = buffer, 269 }; 270 int ret; 271 272 /* cache led mask */ 273 if (offset == 5 && data == card->led_cache) 274 return 0; 275 276 ret = i2c_transfer(&card->led_chip, &msg, 1); 277 if (ret < 0) 278 return ret; 279 280 if (offset == 5) 281 card->led_cache = data; 282 283 return 0; 284 } 285 286 /* delayed work callback used to control the LEDs */ 287 static void peak_pciec_led_work(struct work_struct *work) 288 { 289 struct peak_pciec_card *card = 290 container_of(work, struct peak_pciec_card, led_work.work); 291 struct net_device *netdev; 292 u8 new_led = card->led_cache; 293 int i, up_count = 0; 294 295 /* first check what is to do */ 296 for (i = 0; i < card->chan_count; i++) { 297 /* default is: not configured */ 298 new_led &= ~PCA9553_LED_MASK(i); 299 new_led |= PCA9553_LED_ON(i); 300 301 netdev = card->channel[i].netdev; 302 if (!netdev || !(netdev->flags & IFF_UP)) 303 continue; 304 305 up_count++; 306 307 /* no activity (but configured) */ 308 new_led &= ~PCA9553_LED_MASK(i); 309 new_led |= PCA9553_LED_SLOW(i); 310 311 /* if bytes counters changed, set fast blinking led */ 312 if (netdev->stats.rx_bytes != card->channel[i].prev_rx_bytes) { 313 card->channel[i].prev_rx_bytes = netdev->stats.rx_bytes; 314 new_led &= ~PCA9553_LED_MASK(i); 315 new_led |= PCA9553_LED_FAST(i); 316 } 317 if (netdev->stats.tx_bytes != card->channel[i].prev_tx_bytes) { 318 card->channel[i].prev_tx_bytes = netdev->stats.tx_bytes; 319 new_led &= ~PCA9553_LED_MASK(i); 320 new_led |= PCA9553_LED_FAST(i); 321 } 322 } 323 324 /* check if LS0 settings changed, only update i2c if so */ 325 peak_pciec_write_pca9553(card, 5, new_led); 326 327 /* restart timer (except if no more configured channels) */ 328 if (up_count) 329 schedule_delayed_work(&card->led_work, HZ); 330 } 331 332 /* set LEDs blinking state */ 333 static void peak_pciec_set_leds(struct peak_pciec_card *card, u8 led_mask, u8 s) 334 { 335 u8 new_led = card->led_cache; 336 int i; 337 338 /* first check what is to do */ 339 for (i = 0; i < card->chan_count; i++) 340 if (led_mask & PCA9553_LED(i)) { 341 new_led &= ~PCA9553_LED_MASK(i); 342 new_led |= PCA9553_LED_STATE(s, i); 343 } 344 345 /* check if LS0 settings changed, only update i2c if so */ 346 peak_pciec_write_pca9553(card, 5, new_led); 347 } 348 349 /* start one second delayed work to control LEDs */ 350 static void peak_pciec_start_led_work(struct peak_pciec_card *card) 351 { 352 schedule_delayed_work(&card->led_work, HZ); 353 } 354 355 /* stop LEDs delayed work */ 356 static void peak_pciec_stop_led_work(struct peak_pciec_card *card) 357 { 358 cancel_delayed_work_sync(&card->led_work); 359 } 360 361 /* initialize the PCA9553 4-bit I2C-bus LED chip */ 362 static int peak_pciec_init_leds(struct peak_pciec_card *card) 363 { 364 int err; 365 366 /* prescaler for frequency 0: "SLOW" = 1 Hz = "44" */ 367 err = peak_pciec_write_pca9553(card, 1, 44 / 1); 368 if (err) 369 return err; 370 371 /* duty cycle 0: 50% */ 372 err = peak_pciec_write_pca9553(card, 2, 0x80); 373 if (err) 374 return err; 375 376 /* prescaler for frequency 1: "FAST" = 5 Hz */ 377 err = peak_pciec_write_pca9553(card, 3, 44 / 5); 378 if (err) 379 return err; 380 381 /* duty cycle 1: 50% */ 382 err = peak_pciec_write_pca9553(card, 4, 0x80); 383 if (err) 384 return err; 385 386 /* switch LEDs to initial state */ 387 return peak_pciec_write_pca9553(card, 5, PCA9553_LS0_INIT); 388 } 389 390 /* restore LEDs state to off peak_pciec_leds_exit */ 391 static void peak_pciec_leds_exit(struct peak_pciec_card *card) 392 { 393 /* switch LEDs to off */ 394 peak_pciec_write_pca9553(card, 5, PCA9553_LED_OFF_ALL); 395 } 396 397 /* normal write sja1000 register method overloaded to catch when controller 398 * is started or stopped, to control leds 399 */ 400 static void peak_pciec_write_reg(const struct sja1000_priv *priv, 401 int port, u8 val) 402 { 403 struct peak_pci_chan *chan = priv->priv; 404 struct peak_pciec_card *card = chan->pciec_card; 405 int c = (priv->reg_base - card->reg_base) / PEAK_PCI_CHAN_SIZE; 406 407 /* sja1000 register changes control the leds state */ 408 if (port == SJA1000_MOD) 409 switch (val) { 410 case MOD_RM: 411 /* Reset Mode: set led on */ 412 peak_pciec_set_leds(card, PCA9553_LED(c), PCA9553_ON); 413 break; 414 case 0x00: 415 /* Normal Mode: led slow blinking and start led timer */ 416 peak_pciec_set_leds(card, PCA9553_LED(c), PCA9553_SLOW); 417 peak_pciec_start_led_work(card); 418 break; 419 default: 420 break; 421 } 422 423 /* call base function */ 424 peak_pci_write_reg(priv, port, val); 425 } 426 427 static const struct i2c_algo_bit_data peak_pciec_i2c_bit_ops = { 428 .setsda = pita_setsda, 429 .setscl = pita_setscl, 430 .getsda = pita_getsda, 431 .getscl = pita_getscl, 432 .udelay = 10, 433 .timeout = HZ, 434 }; 435 436 static int peak_pciec_probe(struct pci_dev *pdev, struct net_device *dev) 437 { 438 struct sja1000_priv *priv = netdev_priv(dev); 439 struct peak_pci_chan *chan = priv->priv; 440 struct peak_pciec_card *card; 441 int err; 442 443 /* copy i2c object address from 1st channel */ 444 if (chan->prev_dev) { 445 struct sja1000_priv *prev_priv = netdev_priv(chan->prev_dev); 446 struct peak_pci_chan *prev_chan = prev_priv->priv; 447 448 card = prev_chan->pciec_card; 449 if (!card) 450 return -ENODEV; 451 452 /* channel is the first one: do the init part */ 453 } else { 454 /* create the bit banging I2C adapter structure */ 455 card = kzalloc(sizeof(*card), GFP_KERNEL); 456 if (!card) 457 return -ENOMEM; 458 459 card->cfg_base = chan->cfg_base; 460 card->reg_base = priv->reg_base; 461 462 card->led_chip.owner = THIS_MODULE; 463 card->led_chip.dev.parent = &pdev->dev; 464 card->led_chip.algo_data = &card->i2c_bit; 465 strncpy(card->led_chip.name, "peak_i2c", 466 sizeof(card->led_chip.name)); 467 468 card->i2c_bit = peak_pciec_i2c_bit_ops; 469 card->i2c_bit.udelay = 10; 470 card->i2c_bit.timeout = HZ; 471 card->i2c_bit.data = card; 472 473 peak_pciec_init_pita_gpio(card); 474 475 err = i2c_bit_add_bus(&card->led_chip); 476 if (err) { 477 dev_err(&pdev->dev, "i2c init failed\n"); 478 goto pciec_init_err_1; 479 } 480 481 err = peak_pciec_init_leds(card); 482 if (err) { 483 dev_err(&pdev->dev, "leds hardware init failed\n"); 484 goto pciec_init_err_2; 485 } 486 487 INIT_DELAYED_WORK(&card->led_work, peak_pciec_led_work); 488 /* PCAN-ExpressCard needs its own callback for leds */ 489 priv->write_reg = peak_pciec_write_reg; 490 } 491 492 chan->pciec_card = card; 493 card->channel[card->chan_count++].netdev = dev; 494 495 return 0; 496 497 pciec_init_err_2: 498 i2c_del_adapter(&card->led_chip); 499 500 pciec_init_err_1: 501 peak_pciec_init_pita_gpio(card); 502 kfree(card); 503 504 return err; 505 } 506 507 static void peak_pciec_remove(struct peak_pciec_card *card) 508 { 509 peak_pciec_stop_led_work(card); 510 peak_pciec_leds_exit(card); 511 i2c_del_adapter(&card->led_chip); 512 peak_pciec_init_pita_gpio(card); 513 kfree(card); 514 } 515 516 #else /* CONFIG_CAN_PEAK_PCIEC */ 517 518 /* Placebo functions when PCAN-ExpressCard support is not selected */ 519 static inline int peak_pciec_probe(struct pci_dev *pdev, struct net_device *dev) 520 { 521 return -ENODEV; 522 } 523 524 static inline void peak_pciec_remove(struct peak_pciec_card *card) 525 { 526 } 527 #endif /* CONFIG_CAN_PEAK_PCIEC */ 528 529 static u8 peak_pci_read_reg(const struct sja1000_priv *priv, int port) 530 { 531 return readb(priv->reg_base + (port << 2)); 532 } 533 534 static void peak_pci_write_reg(const struct sja1000_priv *priv, 535 int port, u8 val) 536 { 537 writeb(val, priv->reg_base + (port << 2)); 538 } 539 540 static void peak_pci_post_irq(const struct sja1000_priv *priv) 541 { 542 struct peak_pci_chan *chan = priv->priv; 543 u16 icr; 544 545 /* Select and clear in PITA stored interrupt */ 546 icr = readw(chan->cfg_base + PITA_ICR); 547 if (icr & chan->icr_mask) 548 writew(chan->icr_mask, chan->cfg_base + PITA_ICR); 549 } 550 551 static int peak_pci_probe(struct pci_dev *pdev, const struct pci_device_id *ent) 552 { 553 struct sja1000_priv *priv; 554 struct peak_pci_chan *chan; 555 struct net_device *dev, *prev_dev; 556 void __iomem *cfg_base, *reg_base; 557 u16 sub_sys_id, icr; 558 int i, err, channels; 559 char fw_str[14] = ""; 560 561 err = pci_enable_device(pdev); 562 if (err) 563 return err; 564 565 err = pci_request_regions(pdev, DRV_NAME); 566 if (err) 567 goto failure_disable_pci; 568 569 err = pci_read_config_word(pdev, 0x2e, &sub_sys_id); 570 if (err) 571 goto failure_release_regions; 572 573 dev_dbg(&pdev->dev, "probing device %04x:%04x:%04x\n", 574 pdev->vendor, pdev->device, sub_sys_id); 575 576 err = pci_write_config_word(pdev, 0x44, 0); 577 if (err) 578 goto failure_release_regions; 579 580 if (sub_sys_id >= 12) 581 channels = 4; 582 else if (sub_sys_id >= 10) 583 channels = 3; 584 else if (sub_sys_id >= 4) 585 channels = 2; 586 else 587 channels = 1; 588 589 cfg_base = pci_iomap(pdev, 0, PEAK_PCI_CFG_SIZE); 590 if (!cfg_base) { 591 dev_err(&pdev->dev, "failed to map PCI resource #0\n"); 592 err = -ENOMEM; 593 goto failure_release_regions; 594 } 595 596 reg_base = pci_iomap(pdev, 1, PEAK_PCI_CHAN_SIZE * channels); 597 if (!reg_base) { 598 dev_err(&pdev->dev, "failed to map PCI resource #1\n"); 599 err = -ENOMEM; 600 goto failure_unmap_cfg_base; 601 } 602 603 /* Set GPIO control register */ 604 writew(0x0005, cfg_base + PITA_GPIOICR + 2); 605 /* Enable all channels of this card */ 606 writeb(0x00, cfg_base + PITA_GPIOICR); 607 /* Toggle reset */ 608 writeb(0x05, cfg_base + PITA_MISC + 3); 609 usleep_range(5000, 6000); 610 /* Leave parport mux mode */ 611 writeb(0x04, cfg_base + PITA_MISC + 3); 612 613 /* FPGA equipped card if not 0 */ 614 if (readl(cfg_base + PEAK_VER_REG1)) { 615 /* FPGA card: display version of the running firmware */ 616 u32 fw_ver = readl(cfg_base + PEAK_VER_REG2); 617 618 snprintf(fw_str, sizeof(fw_str), " FW v%u.%u.%u", 619 (fw_ver >> 12) & 0xf, 620 (fw_ver >> 8) & 0xf, 621 (fw_ver >> 4) & 0xf); 622 } 623 624 /* Display commercial name (and, eventually, FW version) of the card */ 625 dev_info(&pdev->dev, "%ux CAN %s%s\n", 626 channels, (const char *)ent->driver_data, fw_str); 627 628 icr = readw(cfg_base + PITA_ICR + 2); 629 630 for (i = 0; i < channels; i++) { 631 dev = alloc_sja1000dev(sizeof(struct peak_pci_chan)); 632 if (!dev) { 633 err = -ENOMEM; 634 goto failure_remove_channels; 635 } 636 637 priv = netdev_priv(dev); 638 chan = priv->priv; 639 640 chan->cfg_base = cfg_base; 641 priv->reg_base = reg_base + i * PEAK_PCI_CHAN_SIZE; 642 643 priv->read_reg = peak_pci_read_reg; 644 priv->write_reg = peak_pci_write_reg; 645 priv->post_irq = peak_pci_post_irq; 646 647 priv->can.clock.freq = PEAK_PCI_CAN_CLOCK; 648 priv->ocr = PEAK_PCI_OCR; 649 priv->cdr = PEAK_PCI_CDR; 650 /* Neither a slave nor a single device distributes the clock */ 651 if (channels == 1 || i > 0) 652 priv->cdr |= CDR_CLK_OFF; 653 654 /* Setup interrupt handling */ 655 priv->irq_flags = IRQF_SHARED; 656 dev->irq = pdev->irq; 657 658 chan->icr_mask = peak_pci_icr_masks[i]; 659 icr |= chan->icr_mask; 660 661 SET_NETDEV_DEV(dev, &pdev->dev); 662 dev->dev_id = i; 663 664 /* Create chain of SJA1000 devices */ 665 chan->prev_dev = pci_get_drvdata(pdev); 666 pci_set_drvdata(pdev, dev); 667 668 /* PCAN-ExpressCard needs some additional i2c init. 669 * This must be done *before* register_sja1000dev() but 670 * *after* devices linkage 671 */ 672 if (pdev->device == PEAK_PCIEC_DEVICE_ID || 673 pdev->device == PEAK_PCIEC34_DEVICE_ID) { 674 err = peak_pciec_probe(pdev, dev); 675 if (err) { 676 dev_err(&pdev->dev, 677 "failed to probe device (err %d)\n", 678 err); 679 goto failure_free_dev; 680 } 681 } 682 683 err = register_sja1000dev(dev); 684 if (err) { 685 dev_err(&pdev->dev, "failed to register device\n"); 686 goto failure_free_dev; 687 } 688 689 dev_info(&pdev->dev, 690 "%s at reg_base=0x%p cfg_base=0x%p irq=%d\n", 691 dev->name, priv->reg_base, chan->cfg_base, dev->irq); 692 } 693 694 /* Enable interrupts */ 695 writew(icr, cfg_base + PITA_ICR + 2); 696 697 return 0; 698 699 failure_free_dev: 700 pci_set_drvdata(pdev, chan->prev_dev); 701 free_sja1000dev(dev); 702 703 failure_remove_channels: 704 /* Disable interrupts */ 705 writew(0x0, cfg_base + PITA_ICR + 2); 706 707 chan = NULL; 708 for (dev = pci_get_drvdata(pdev); dev; dev = prev_dev) { 709 priv = netdev_priv(dev); 710 chan = priv->priv; 711 prev_dev = chan->prev_dev; 712 713 unregister_sja1000dev(dev); 714 free_sja1000dev(dev); 715 } 716 717 /* free any PCIeC resources too */ 718 if (chan && chan->pciec_card) 719 peak_pciec_remove(chan->pciec_card); 720 721 pci_iounmap(pdev, reg_base); 722 723 failure_unmap_cfg_base: 724 pci_iounmap(pdev, cfg_base); 725 726 failure_release_regions: 727 pci_release_regions(pdev); 728 729 failure_disable_pci: 730 pci_disable_device(pdev); 731 732 /* pci_xxx_config_word() return positive PCIBIOS_xxx error codes while 733 * the probe() function must return a negative errno in case of failure 734 * (err is unchanged if negative) 735 */ 736 return pcibios_err_to_errno(err); 737 } 738 739 static void peak_pci_remove(struct pci_dev *pdev) 740 { 741 struct net_device *dev = pci_get_drvdata(pdev); /* Last device */ 742 struct sja1000_priv *priv = netdev_priv(dev); 743 struct peak_pci_chan *chan = priv->priv; 744 void __iomem *cfg_base = chan->cfg_base; 745 void __iomem *reg_base = priv->reg_base; 746 747 /* Disable interrupts */ 748 writew(0x0, cfg_base + PITA_ICR + 2); 749 750 /* Loop over all registered devices */ 751 while (1) { 752 struct net_device *prev_dev = chan->prev_dev; 753 754 dev_info(&pdev->dev, "removing device %s\n", dev->name); 755 /* do that only for first channel */ 756 if (!prev_dev && chan->pciec_card) 757 peak_pciec_remove(chan->pciec_card); 758 unregister_sja1000dev(dev); 759 free_sja1000dev(dev); 760 dev = prev_dev; 761 762 if (!dev) 763 break; 764 priv = netdev_priv(dev); 765 chan = priv->priv; 766 } 767 768 pci_iounmap(pdev, reg_base); 769 pci_iounmap(pdev, cfg_base); 770 pci_release_regions(pdev); 771 pci_disable_device(pdev); 772 } 773 774 static struct pci_driver peak_pci_driver = { 775 .name = DRV_NAME, 776 .id_table = peak_pci_tbl, 777 .probe = peak_pci_probe, 778 .remove = peak_pci_remove, 779 }; 780 781 module_pci_driver(peak_pci_driver); 782