1 /* 2 * Copyright (C) 2008 Per Dalen <per.dalen@cnw.se> 3 * 4 * Parts of this software are based on (derived) the following: 5 * 6 * - Kvaser linux driver, version 4.72 BETA 7 * Copyright (C) 2002-2007 KVASER AB 8 * 9 * - Lincan driver, version 0.3.3, OCERA project 10 * Copyright (C) 2004 Pavel Pisa 11 * Copyright (C) 2001 Arnaud Westenberg 12 * 13 * - Socketcan SJA1000 drivers 14 * Copyright (C) 2007 Wolfgang Grandegger <wg@grandegger.com> 15 * Copyright (c) 2002-2007 Volkswagen Group Electronic Research 16 * Copyright (c) 2003 Matthias Brukner, Trajet Gmbh, Rebenring 33, 17 * 38106 Braunschweig, GERMANY 18 * 19 * This program is free software; you can redistribute it and/or modify 20 * it under the terms of the version 2 of the GNU General Public License 21 * as published by the Free Software Foundation 22 * 23 * This program is distributed in the hope that it will be useful, but 24 * WITHOUT ANY WARRANTY; without even the implied warranty of 25 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU 26 * General Public License for more details. 27 * 28 * You should have received a copy of the GNU General Public License 29 * along with this program; if not, write to the Free Software Foundation, 30 * Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. 31 */ 32 33 #include <linux/kernel.h> 34 #include <linux/module.h> 35 #include <linux/interrupt.h> 36 #include <linux/netdevice.h> 37 #include <linux/delay.h> 38 #include <linux/pci.h> 39 #include <linux/can.h> 40 #include <linux/can/dev.h> 41 #include <linux/io.h> 42 43 #include "sja1000.h" 44 45 #define DRV_NAME "kvaser_pci" 46 47 MODULE_AUTHOR("Per Dalen <per.dalen@cnw.se>"); 48 MODULE_DESCRIPTION("Socket-CAN driver for KVASER PCAN PCI cards"); 49 MODULE_SUPPORTED_DEVICE("KVASER PCAN PCI CAN card"); 50 MODULE_LICENSE("GPL v2"); 51 52 #define MAX_NO_OF_CHANNELS 4 /* max no of channels on a single card */ 53 54 struct kvaser_pci { 55 int channel; 56 struct pci_dev *pci_dev; 57 struct net_device *slave_dev[MAX_NO_OF_CHANNELS-1]; 58 void __iomem *conf_addr; 59 void __iomem *res_addr; 60 int no_channels; 61 u8 xilinx_ver; 62 }; 63 64 #define KVASER_PCI_CAN_CLOCK (16000000 / 2) 65 66 /* 67 * The board configuration is probably following: 68 * RX1 is connected to ground. 69 * TX1 is not connected. 70 * CLKO is not connected. 71 * Setting the OCR register to 0xDA is a good idea. 72 * This means normal output mode , push-pull and the correct polarity. 73 */ 74 #define KVASER_PCI_OCR (OCR_TX0_PUSHPULL | OCR_TX1_PUSHPULL) 75 76 /* 77 * In the CDR register, you should set CBP to 1. 78 * You will probably also want to set the clock divider value to 0 79 * (meaning divide-by-2), the Pelican bit, and the clock-off bit 80 * (you will have no need for CLKOUT anyway). 81 */ 82 #define KVASER_PCI_CDR (CDR_CBP | CDR_CLKOUT_MASK) 83 84 /* 85 * These register values are valid for revision 14 of the Xilinx logic. 86 */ 87 #define XILINX_VERINT 7 /* Lower nibble simulate interrupts, 88 high nibble version number. */ 89 90 #define XILINX_PRESUMED_VERSION 14 91 92 /* 93 * Important S5920 registers 94 */ 95 #define S5920_INTCSR 0x38 96 #define S5920_PTCR 0x60 97 #define INTCSR_ADDON_INTENABLE_M 0x2000 98 99 100 #define KVASER_PCI_PORT_BYTES 0x20 101 102 #define PCI_CONFIG_PORT_SIZE 0x80 /* size of the config io-memory */ 103 #define PCI_PORT_SIZE 0x80 /* size of a channel io-memory */ 104 #define PCI_PORT_XILINX_SIZE 0x08 /* size of a xilinx io-memory */ 105 106 #define KVASER_PCI_VENDOR_ID1 0x10e8 /* the PCI device and vendor IDs */ 107 #define KVASER_PCI_DEVICE_ID1 0x8406 108 109 #define KVASER_PCI_VENDOR_ID2 0x1a07 /* the PCI device and vendor IDs */ 110 #define KVASER_PCI_DEVICE_ID2 0x0008 111 112 static struct pci_device_id kvaser_pci_tbl[] = { 113 {KVASER_PCI_VENDOR_ID1, KVASER_PCI_DEVICE_ID1, PCI_ANY_ID, PCI_ANY_ID,}, 114 {KVASER_PCI_VENDOR_ID2, KVASER_PCI_DEVICE_ID2, PCI_ANY_ID, PCI_ANY_ID,}, 115 { 0,} 116 }; 117 118 MODULE_DEVICE_TABLE(pci, kvaser_pci_tbl); 119 120 static u8 kvaser_pci_read_reg(const struct sja1000_priv *priv, int port) 121 { 122 return ioread8(priv->reg_base + port); 123 } 124 125 static void kvaser_pci_write_reg(const struct sja1000_priv *priv, 126 int port, u8 val) 127 { 128 iowrite8(val, priv->reg_base + port); 129 } 130 131 static void kvaser_pci_disable_irq(struct net_device *dev) 132 { 133 struct sja1000_priv *priv = netdev_priv(dev); 134 struct kvaser_pci *board = priv->priv; 135 u32 intcsr; 136 137 /* Disable interrupts from card */ 138 intcsr = ioread32(board->conf_addr + S5920_INTCSR); 139 intcsr &= ~INTCSR_ADDON_INTENABLE_M; 140 iowrite32(intcsr, board->conf_addr + S5920_INTCSR); 141 } 142 143 static void kvaser_pci_enable_irq(struct net_device *dev) 144 { 145 struct sja1000_priv *priv = netdev_priv(dev); 146 struct kvaser_pci *board = priv->priv; 147 u32 tmp_en_io; 148 149 /* Enable interrupts from card */ 150 tmp_en_io = ioread32(board->conf_addr + S5920_INTCSR); 151 tmp_en_io |= INTCSR_ADDON_INTENABLE_M; 152 iowrite32(tmp_en_io, board->conf_addr + S5920_INTCSR); 153 } 154 155 static int number_of_sja1000_chip(void __iomem *base_addr) 156 { 157 u8 status; 158 int i; 159 160 for (i = 0; i < MAX_NO_OF_CHANNELS; i++) { 161 /* reset chip */ 162 iowrite8(MOD_RM, base_addr + 163 (i * KVASER_PCI_PORT_BYTES) + REG_MOD); 164 status = ioread8(base_addr + 165 (i * KVASER_PCI_PORT_BYTES) + REG_MOD); 166 /* check reset bit */ 167 if (!(status & MOD_RM)) 168 break; 169 } 170 171 return i; 172 } 173 174 static void kvaser_pci_del_chan(struct net_device *dev) 175 { 176 struct sja1000_priv *priv; 177 struct kvaser_pci *board; 178 int i; 179 180 if (!dev) 181 return; 182 priv = netdev_priv(dev); 183 board = priv->priv; 184 if (!board) 185 return; 186 187 dev_info(&board->pci_dev->dev, "Removing device %s\n", 188 dev->name); 189 190 /* Disable PCI interrupts */ 191 kvaser_pci_disable_irq(dev); 192 193 for (i = 0; i < board->no_channels - 1; i++) { 194 if (board->slave_dev[i]) { 195 dev_info(&board->pci_dev->dev, "Removing device %s\n", 196 board->slave_dev[i]->name); 197 unregister_sja1000dev(board->slave_dev[i]); 198 free_sja1000dev(board->slave_dev[i]); 199 } 200 } 201 unregister_sja1000dev(dev); 202 203 pci_iounmap(board->pci_dev, priv->reg_base); 204 pci_iounmap(board->pci_dev, board->conf_addr); 205 pci_iounmap(board->pci_dev, board->res_addr); 206 207 free_sja1000dev(dev); 208 } 209 210 static int kvaser_pci_add_chan(struct pci_dev *pdev, int channel, 211 struct net_device **master_dev, 212 void __iomem *conf_addr, 213 void __iomem *res_addr, 214 void __iomem *base_addr) 215 { 216 struct net_device *dev; 217 struct sja1000_priv *priv; 218 struct kvaser_pci *board; 219 int err, init_step; 220 221 dev = alloc_sja1000dev(sizeof(struct kvaser_pci)); 222 if (dev == NULL) 223 return -ENOMEM; 224 225 priv = netdev_priv(dev); 226 board = priv->priv; 227 228 board->pci_dev = pdev; 229 board->channel = channel; 230 231 /* S5920 */ 232 board->conf_addr = conf_addr; 233 234 /* XILINX board wide address */ 235 board->res_addr = res_addr; 236 237 if (channel == 0) { 238 board->xilinx_ver = 239 ioread8(board->res_addr + XILINX_VERINT) >> 4; 240 init_step = 2; 241 242 /* Assert PTADR# - we're in passive mode so the other bits are 243 not important */ 244 iowrite32(0x80808080UL, board->conf_addr + S5920_PTCR); 245 246 /* Enable interrupts from card */ 247 kvaser_pci_enable_irq(dev); 248 } else { 249 struct sja1000_priv *master_priv = netdev_priv(*master_dev); 250 struct kvaser_pci *master_board = master_priv->priv; 251 master_board->slave_dev[channel - 1] = dev; 252 master_board->no_channels = channel + 1; 253 board->xilinx_ver = master_board->xilinx_ver; 254 } 255 256 priv->reg_base = base_addr + channel * KVASER_PCI_PORT_BYTES; 257 258 priv->read_reg = kvaser_pci_read_reg; 259 priv->write_reg = kvaser_pci_write_reg; 260 261 priv->can.clock.freq = KVASER_PCI_CAN_CLOCK; 262 263 priv->ocr = KVASER_PCI_OCR; 264 priv->cdr = KVASER_PCI_CDR; 265 266 priv->irq_flags = IRQF_SHARED; 267 dev->irq = pdev->irq; 268 269 init_step = 4; 270 271 dev_info(&pdev->dev, "reg_base=%p conf_addr=%p irq=%d\n", 272 priv->reg_base, board->conf_addr, dev->irq); 273 274 SET_NETDEV_DEV(dev, &pdev->dev); 275 276 /* Register SJA1000 device */ 277 err = register_sja1000dev(dev); 278 if (err) { 279 dev_err(&pdev->dev, "Registering device failed (err=%d)\n", 280 err); 281 goto failure; 282 } 283 284 if (channel == 0) 285 *master_dev = dev; 286 287 return 0; 288 289 failure: 290 kvaser_pci_del_chan(dev); 291 return err; 292 } 293 294 static int __devinit kvaser_pci_init_one(struct pci_dev *pdev, 295 const struct pci_device_id *ent) 296 { 297 int err; 298 struct net_device *master_dev = NULL; 299 struct sja1000_priv *priv; 300 struct kvaser_pci *board; 301 int no_channels; 302 void __iomem *base_addr = NULL; 303 void __iomem *conf_addr = NULL; 304 void __iomem *res_addr = NULL; 305 int i; 306 307 dev_info(&pdev->dev, "initializing device %04x:%04x\n", 308 pdev->vendor, pdev->device); 309 310 err = pci_enable_device(pdev); 311 if (err) 312 goto failure; 313 314 err = pci_request_regions(pdev, DRV_NAME); 315 if (err) 316 goto failure_release_pci; 317 318 /* S5920 */ 319 conf_addr = pci_iomap(pdev, 0, PCI_CONFIG_PORT_SIZE); 320 if (conf_addr == NULL) { 321 err = -ENODEV; 322 goto failure_release_regions; 323 } 324 325 /* XILINX board wide address */ 326 res_addr = pci_iomap(pdev, 2, PCI_PORT_XILINX_SIZE); 327 if (res_addr == NULL) { 328 err = -ENOMEM; 329 goto failure_iounmap; 330 } 331 332 base_addr = pci_iomap(pdev, 1, PCI_PORT_SIZE); 333 if (base_addr == NULL) { 334 err = -ENOMEM; 335 goto failure_iounmap; 336 } 337 338 no_channels = number_of_sja1000_chip(base_addr); 339 if (no_channels == 0) { 340 err = -ENOMEM; 341 goto failure_iounmap; 342 } 343 344 for (i = 0; i < no_channels; i++) { 345 err = kvaser_pci_add_chan(pdev, i, &master_dev, 346 conf_addr, res_addr, 347 base_addr); 348 if (err) 349 goto failure_cleanup; 350 } 351 352 priv = netdev_priv(master_dev); 353 board = priv->priv; 354 355 dev_info(&pdev->dev, "xilinx version=%d number of channels=%d\n", 356 board->xilinx_ver, board->no_channels); 357 358 pci_set_drvdata(pdev, master_dev); 359 return 0; 360 361 failure_cleanup: 362 kvaser_pci_del_chan(master_dev); 363 364 failure_iounmap: 365 if (conf_addr != NULL) 366 pci_iounmap(pdev, conf_addr); 367 if (res_addr != NULL) 368 pci_iounmap(pdev, res_addr); 369 if (base_addr != NULL) 370 pci_iounmap(pdev, base_addr); 371 372 failure_release_regions: 373 pci_release_regions(pdev); 374 375 failure_release_pci: 376 pci_disable_device(pdev); 377 378 failure: 379 return err; 380 381 } 382 383 static void __devexit kvaser_pci_remove_one(struct pci_dev *pdev) 384 { 385 struct net_device *dev = pci_get_drvdata(pdev); 386 387 kvaser_pci_del_chan(dev); 388 389 pci_release_regions(pdev); 390 pci_disable_device(pdev); 391 pci_set_drvdata(pdev, NULL); 392 } 393 394 static struct pci_driver kvaser_pci_driver = { 395 .name = DRV_NAME, 396 .id_table = kvaser_pci_tbl, 397 .probe = kvaser_pci_init_one, 398 .remove = __devexit_p(kvaser_pci_remove_one), 399 }; 400 401 static int __init kvaser_pci_init(void) 402 { 403 return pci_register_driver(&kvaser_pci_driver); 404 } 405 406 static void __exit kvaser_pci_exit(void) 407 { 408 pci_unregister_driver(&kvaser_pci_driver); 409 } 410 411 module_init(kvaser_pci_init); 412 module_exit(kvaser_pci_exit); 413