1 /* 2 * Copyright (C) 2007 Wolfgang Grandegger <wg@grandegger.com> 3 * Copyright (C) 2008 Markus Plessing <plessing@ems-wuensche.com> 4 * Copyright (C) 2008 Sebastian Haas <haas@ems-wuensche.com> 5 * 6 * This program is free software; you can redistribute it and/or modify 7 * it under the terms of the version 2 of the GNU General Public License 8 * as published by the Free Software Foundation 9 * 10 * This program is distributed in the hope that it will be useful, 11 * but WITHOUT ANY WARRANTY; without even the implied warranty of 12 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the 13 * GNU General Public License for more details. 14 * 15 * You should have received a copy of the GNU General Public License 16 * along with this program; if not, write to the Free Software Foundation, 17 * Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. 18 */ 19 20 #include <linux/kernel.h> 21 #include <linux/module.h> 22 #include <linux/interrupt.h> 23 #include <linux/netdevice.h> 24 #include <linux/delay.h> 25 #include <linux/slab.h> 26 #include <linux/pci.h> 27 #include <linux/can/dev.h> 28 #include <linux/io.h> 29 30 #include "sja1000.h" 31 32 #define DRV_NAME "ems_pci" 33 34 MODULE_AUTHOR("Sebastian Haas <haas@ems-wuenche.com>"); 35 MODULE_DESCRIPTION("Socket-CAN driver for EMS CPC-PCI/PCIe/104P CAN cards"); 36 MODULE_SUPPORTED_DEVICE("EMS CPC-PCI/PCIe/104P CAN card"); 37 MODULE_LICENSE("GPL v2"); 38 39 #define EMS_PCI_V1_MAX_CHAN 2 40 #define EMS_PCI_V2_MAX_CHAN 4 41 #define EMS_PCI_MAX_CHAN EMS_PCI_V2_MAX_CHAN 42 43 struct ems_pci_card { 44 int version; 45 int channels; 46 47 struct pci_dev *pci_dev; 48 struct net_device *net_dev[EMS_PCI_MAX_CHAN]; 49 50 void __iomem *conf_addr; 51 void __iomem *base_addr; 52 }; 53 54 #define EMS_PCI_CAN_CLOCK (16000000 / 2) 55 56 /* 57 * Register definitions and descriptions are from LinCAN 0.3.3. 58 * 59 * PSB4610 PITA-2 bridge control registers 60 */ 61 #define PITA2_ICR 0x00 /* Interrupt Control Register */ 62 #define PITA2_ICR_INT0 0x00000002 /* [RC] INT0 Active/Clear */ 63 #define PITA2_ICR_INT0_EN 0x00020000 /* [RW] Enable INT0 */ 64 65 #define PITA2_MISC 0x1c /* Miscellaneous Register */ 66 #define PITA2_MISC_CONFIG 0x04000000 /* Multiplexed parallel interface */ 67 68 /* 69 * Register definitions for the PLX 9030 70 */ 71 #define PLX_ICSR 0x4c /* Interrupt Control/Status register */ 72 #define PLX_ICSR_LINTI1_ENA 0x0001 /* LINTi1 Enable */ 73 #define PLX_ICSR_PCIINT_ENA 0x0040 /* PCI Interrupt Enable */ 74 #define PLX_ICSR_LINTI1_CLR 0x0400 /* Local Edge Triggerable Interrupt Clear */ 75 #define PLX_ICSR_ENA_CLR (PLX_ICSR_LINTI1_ENA | PLX_ICSR_PCIINT_ENA | \ 76 PLX_ICSR_LINTI1_CLR) 77 78 /* 79 * The board configuration is probably following: 80 * RX1 is connected to ground. 81 * TX1 is not connected. 82 * CLKO is not connected. 83 * Setting the OCR register to 0xDA is a good idea. 84 * This means normal output mode, push-pull and the correct polarity. 85 */ 86 #define EMS_PCI_OCR (OCR_TX0_PUSHPULL | OCR_TX1_PUSHPULL) 87 88 /* 89 * In the CDR register, you should set CBP to 1. 90 * You will probably also want to set the clock divider value to 7 91 * (meaning direct oscillator output) because the second SJA1000 chip 92 * is driven by the first one CLKOUT output. 93 */ 94 #define EMS_PCI_CDR (CDR_CBP | CDR_CLKOUT_MASK) 95 96 #define EMS_PCI_V1_BASE_BAR 1 97 #define EMS_PCI_V1_CONF_SIZE 4096 /* size of PITA control area */ 98 #define EMS_PCI_V2_BASE_BAR 2 99 #define EMS_PCI_V2_CONF_SIZE 128 /* size of PLX control area */ 100 #define EMS_PCI_CAN_BASE_OFFSET 0x400 /* offset where the controllers starts */ 101 #define EMS_PCI_CAN_CTRL_SIZE 0x200 /* memory size for each controller */ 102 103 #define EMS_PCI_BASE_SIZE 4096 /* size of controller area */ 104 105 static DEFINE_PCI_DEVICE_TABLE(ems_pci_tbl) = { 106 /* CPC-PCI v1 */ 107 {PCI_VENDOR_ID_SIEMENS, 0x2104, PCI_ANY_ID, PCI_ANY_ID,}, 108 /* CPC-PCI v2 */ 109 {PCI_VENDOR_ID_PLX, PCI_DEVICE_ID_PLX_9030, PCI_VENDOR_ID_PLX, 0x4000}, 110 /* CPC-104P v2 */ 111 {PCI_VENDOR_ID_PLX, PCI_DEVICE_ID_PLX_9030, PCI_VENDOR_ID_PLX, 0x4002}, 112 {0,} 113 }; 114 MODULE_DEVICE_TABLE(pci, ems_pci_tbl); 115 116 /* 117 * Helper to read internal registers from card logic (not CAN) 118 */ 119 static u8 ems_pci_v1_readb(struct ems_pci_card *card, unsigned int port) 120 { 121 return readb(card->base_addr + (port * 4)); 122 } 123 124 static u8 ems_pci_v1_read_reg(const struct sja1000_priv *priv, int port) 125 { 126 return readb(priv->reg_base + (port * 4)); 127 } 128 129 static void ems_pci_v1_write_reg(const struct sja1000_priv *priv, 130 int port, u8 val) 131 { 132 writeb(val, priv->reg_base + (port * 4)); 133 } 134 135 static void ems_pci_v1_post_irq(const struct sja1000_priv *priv) 136 { 137 struct ems_pci_card *card = (struct ems_pci_card *)priv->priv; 138 139 /* reset int flag of pita */ 140 writel(PITA2_ICR_INT0_EN | PITA2_ICR_INT0, 141 card->conf_addr + PITA2_ICR); 142 } 143 144 static u8 ems_pci_v2_read_reg(const struct sja1000_priv *priv, int port) 145 { 146 return readb(priv->reg_base + port); 147 } 148 149 static void ems_pci_v2_write_reg(const struct sja1000_priv *priv, 150 int port, u8 val) 151 { 152 writeb(val, priv->reg_base + port); 153 } 154 155 static void ems_pci_v2_post_irq(const struct sja1000_priv *priv) 156 { 157 struct ems_pci_card *card = (struct ems_pci_card *)priv->priv; 158 159 writel(PLX_ICSR_ENA_CLR, card->conf_addr + PLX_ICSR); 160 } 161 162 /* 163 * Check if a CAN controller is present at the specified location 164 * by trying to set 'em into the PeliCAN mode 165 */ 166 static inline int ems_pci_check_chan(const struct sja1000_priv *priv) 167 { 168 unsigned char res; 169 170 /* Make sure SJA1000 is in reset mode */ 171 priv->write_reg(priv, SJA1000_MOD, 1); 172 173 priv->write_reg(priv, SJA1000_CDR, CDR_PELICAN); 174 175 /* read reset-values */ 176 res = priv->read_reg(priv, SJA1000_CDR); 177 178 if (res == CDR_PELICAN) 179 return 1; 180 181 return 0; 182 } 183 184 static void ems_pci_del_card(struct pci_dev *pdev) 185 { 186 struct ems_pci_card *card = pci_get_drvdata(pdev); 187 struct net_device *dev; 188 int i = 0; 189 190 for (i = 0; i < card->channels; i++) { 191 dev = card->net_dev[i]; 192 193 if (!dev) 194 continue; 195 196 dev_info(&pdev->dev, "Removing %s.\n", dev->name); 197 unregister_sja1000dev(dev); 198 free_sja1000dev(dev); 199 } 200 201 if (card->base_addr != NULL) 202 pci_iounmap(card->pci_dev, card->base_addr); 203 204 if (card->conf_addr != NULL) 205 pci_iounmap(card->pci_dev, card->conf_addr); 206 207 kfree(card); 208 209 pci_disable_device(pdev); 210 pci_set_drvdata(pdev, NULL); 211 } 212 213 static void ems_pci_card_reset(struct ems_pci_card *card) 214 { 215 /* Request board reset */ 216 writeb(0, card->base_addr); 217 } 218 219 /* 220 * Probe PCI device for EMS CAN signature and register each available 221 * CAN channel to SJA1000 Socket-CAN subsystem. 222 */ 223 static int ems_pci_add_card(struct pci_dev *pdev, 224 const struct pci_device_id *ent) 225 { 226 struct sja1000_priv *priv; 227 struct net_device *dev; 228 struct ems_pci_card *card; 229 int max_chan, conf_size, base_bar; 230 int err, i; 231 232 /* Enabling PCI device */ 233 if (pci_enable_device(pdev) < 0) { 234 dev_err(&pdev->dev, "Enabling PCI device failed\n"); 235 return -ENODEV; 236 } 237 238 /* Allocating card structures to hold addresses, ... */ 239 card = kzalloc(sizeof(struct ems_pci_card), GFP_KERNEL); 240 if (card == NULL) { 241 pci_disable_device(pdev); 242 return -ENOMEM; 243 } 244 245 pci_set_drvdata(pdev, card); 246 247 card->pci_dev = pdev; 248 249 card->channels = 0; 250 251 if (pdev->vendor == PCI_VENDOR_ID_PLX) { 252 card->version = 2; /* CPC-PCI v2 */ 253 max_chan = EMS_PCI_V2_MAX_CHAN; 254 base_bar = EMS_PCI_V2_BASE_BAR; 255 conf_size = EMS_PCI_V2_CONF_SIZE; 256 } else { 257 card->version = 1; /* CPC-PCI v1 */ 258 max_chan = EMS_PCI_V1_MAX_CHAN; 259 base_bar = EMS_PCI_V1_BASE_BAR; 260 conf_size = EMS_PCI_V1_CONF_SIZE; 261 } 262 263 /* Remap configuration space and controller memory area */ 264 card->conf_addr = pci_iomap(pdev, 0, conf_size); 265 if (card->conf_addr == NULL) { 266 err = -ENOMEM; 267 goto failure_cleanup; 268 } 269 270 card->base_addr = pci_iomap(pdev, base_bar, EMS_PCI_BASE_SIZE); 271 if (card->base_addr == NULL) { 272 err = -ENOMEM; 273 goto failure_cleanup; 274 } 275 276 if (card->version == 1) { 277 /* Configure PITA-2 parallel interface (enable MUX) */ 278 writel(PITA2_MISC_CONFIG, card->conf_addr + PITA2_MISC); 279 280 /* Check for unique EMS CAN signature */ 281 if (ems_pci_v1_readb(card, 0) != 0x55 || 282 ems_pci_v1_readb(card, 1) != 0xAA || 283 ems_pci_v1_readb(card, 2) != 0x01 || 284 ems_pci_v1_readb(card, 3) != 0xCB || 285 ems_pci_v1_readb(card, 4) != 0x11) { 286 dev_err(&pdev->dev, 287 "Not EMS Dr. Thomas Wuensche interface\n"); 288 err = -ENODEV; 289 goto failure_cleanup; 290 } 291 } 292 293 ems_pci_card_reset(card); 294 295 /* Detect available channels */ 296 for (i = 0; i < max_chan; i++) { 297 dev = alloc_sja1000dev(0); 298 if (dev == NULL) { 299 err = -ENOMEM; 300 goto failure_cleanup; 301 } 302 303 card->net_dev[i] = dev; 304 priv = netdev_priv(dev); 305 priv->priv = card; 306 priv->irq_flags = IRQF_SHARED; 307 308 dev->irq = pdev->irq; 309 priv->reg_base = card->base_addr + EMS_PCI_CAN_BASE_OFFSET 310 + (i * EMS_PCI_CAN_CTRL_SIZE); 311 if (card->version == 1) { 312 priv->read_reg = ems_pci_v1_read_reg; 313 priv->write_reg = ems_pci_v1_write_reg; 314 priv->post_irq = ems_pci_v1_post_irq; 315 } else { 316 priv->read_reg = ems_pci_v2_read_reg; 317 priv->write_reg = ems_pci_v2_write_reg; 318 priv->post_irq = ems_pci_v2_post_irq; 319 } 320 321 /* Check if channel is present */ 322 if (ems_pci_check_chan(priv)) { 323 priv->can.clock.freq = EMS_PCI_CAN_CLOCK; 324 priv->ocr = EMS_PCI_OCR; 325 priv->cdr = EMS_PCI_CDR; 326 327 SET_NETDEV_DEV(dev, &pdev->dev); 328 329 if (card->version == 1) 330 /* reset int flag of pita */ 331 writel(PITA2_ICR_INT0_EN | PITA2_ICR_INT0, 332 card->conf_addr + PITA2_ICR); 333 else 334 /* enable IRQ in PLX 9030 */ 335 writel(PLX_ICSR_ENA_CLR, 336 card->conf_addr + PLX_ICSR); 337 338 /* Register SJA1000 device */ 339 err = register_sja1000dev(dev); 340 if (err) { 341 dev_err(&pdev->dev, "Registering device failed " 342 "(err=%d)\n", err); 343 free_sja1000dev(dev); 344 goto failure_cleanup; 345 } 346 347 card->channels++; 348 349 dev_info(&pdev->dev, "Channel #%d at 0x%p, irq %d\n", 350 i + 1, priv->reg_base, dev->irq); 351 } else { 352 free_sja1000dev(dev); 353 } 354 } 355 356 return 0; 357 358 failure_cleanup: 359 dev_err(&pdev->dev, "Error: %d. Cleaning Up.\n", err); 360 361 ems_pci_del_card(pdev); 362 363 return err; 364 } 365 366 static struct pci_driver ems_pci_driver = { 367 .name = DRV_NAME, 368 .id_table = ems_pci_tbl, 369 .probe = ems_pci_add_card, 370 .remove = ems_pci_del_card, 371 }; 372 373 module_pci_driver(ems_pci_driver); 374