1 // SPDX-License-Identifier: GPL-2.0-only
2 /* Copyright (C) 2005 Marc Kleine-Budde, Pengutronix
3 * Copyright (C) 2006 Andrey Volkov, Varma Electronics
4 * Copyright (C) 2008-2009 Wolfgang Grandegger <wg@grandegger.com>
5 */
6
7 #include <linux/kernel.h>
8 #include <linux/slab.h>
9 #include <linux/netdevice.h>
10 #include <linux/if_arp.h>
11 #include <linux/workqueue.h>
12 #include <linux/can.h>
13 #include <linux/can/can-ml.h>
14 #include <linux/can/dev.h>
15 #include <linux/can/skb.h>
16 #include <linux/gpio/consumer.h>
17 #include <linux/of.h>
18
can_update_state_error_stats(struct net_device * dev,enum can_state new_state)19 static void can_update_state_error_stats(struct net_device *dev,
20 enum can_state new_state)
21 {
22 struct can_priv *priv = netdev_priv(dev);
23
24 if (new_state <= priv->state)
25 return;
26
27 switch (new_state) {
28 case CAN_STATE_ERROR_WARNING:
29 priv->can_stats.error_warning++;
30 break;
31 case CAN_STATE_ERROR_PASSIVE:
32 priv->can_stats.error_passive++;
33 break;
34 case CAN_STATE_BUS_OFF:
35 priv->can_stats.bus_off++;
36 break;
37 default:
38 break;
39 }
40 }
41
can_tx_state_to_frame(struct net_device * dev,enum can_state state)42 static int can_tx_state_to_frame(struct net_device *dev, enum can_state state)
43 {
44 switch (state) {
45 case CAN_STATE_ERROR_ACTIVE:
46 return CAN_ERR_CRTL_ACTIVE;
47 case CAN_STATE_ERROR_WARNING:
48 return CAN_ERR_CRTL_TX_WARNING;
49 case CAN_STATE_ERROR_PASSIVE:
50 return CAN_ERR_CRTL_TX_PASSIVE;
51 default:
52 return 0;
53 }
54 }
55
can_rx_state_to_frame(struct net_device * dev,enum can_state state)56 static int can_rx_state_to_frame(struct net_device *dev, enum can_state state)
57 {
58 switch (state) {
59 case CAN_STATE_ERROR_ACTIVE:
60 return CAN_ERR_CRTL_ACTIVE;
61 case CAN_STATE_ERROR_WARNING:
62 return CAN_ERR_CRTL_RX_WARNING;
63 case CAN_STATE_ERROR_PASSIVE:
64 return CAN_ERR_CRTL_RX_PASSIVE;
65 default:
66 return 0;
67 }
68 }
69
can_get_state_str(const enum can_state state)70 const char *can_get_state_str(const enum can_state state)
71 {
72 switch (state) {
73 case CAN_STATE_ERROR_ACTIVE:
74 return "Error Active";
75 case CAN_STATE_ERROR_WARNING:
76 return "Error Warning";
77 case CAN_STATE_ERROR_PASSIVE:
78 return "Error Passive";
79 case CAN_STATE_BUS_OFF:
80 return "Bus Off";
81 case CAN_STATE_STOPPED:
82 return "Stopped";
83 case CAN_STATE_SLEEPING:
84 return "Sleeping";
85 default:
86 return "<unknown>";
87 }
88
89 return "<unknown>";
90 }
91 EXPORT_SYMBOL_GPL(can_get_state_str);
92
can_change_state(struct net_device * dev,struct can_frame * cf,enum can_state tx_state,enum can_state rx_state)93 void can_change_state(struct net_device *dev, struct can_frame *cf,
94 enum can_state tx_state, enum can_state rx_state)
95 {
96 struct can_priv *priv = netdev_priv(dev);
97 enum can_state new_state = max(tx_state, rx_state);
98
99 if (unlikely(new_state == priv->state)) {
100 netdev_warn(dev, "%s: oops, state did not change", __func__);
101 return;
102 }
103
104 netdev_dbg(dev, "Controller changed from %s State (%d) into %s State (%d).\n",
105 can_get_state_str(priv->state), priv->state,
106 can_get_state_str(new_state), new_state);
107
108 can_update_state_error_stats(dev, new_state);
109 priv->state = new_state;
110
111 if (!cf)
112 return;
113
114 if (unlikely(new_state == CAN_STATE_BUS_OFF)) {
115 cf->can_id |= CAN_ERR_BUSOFF;
116 return;
117 }
118
119 cf->can_id |= CAN_ERR_CRTL;
120 cf->data[1] |= tx_state >= rx_state ?
121 can_tx_state_to_frame(dev, tx_state) : 0;
122 cf->data[1] |= tx_state <= rx_state ?
123 can_rx_state_to_frame(dev, rx_state) : 0;
124 }
125 EXPORT_SYMBOL_GPL(can_change_state);
126
127 /* CAN device restart for bus-off recovery */
can_restart(struct net_device * dev)128 static void can_restart(struct net_device *dev)
129 {
130 struct can_priv *priv = netdev_priv(dev);
131 struct sk_buff *skb;
132 struct can_frame *cf;
133 int err;
134
135 if (netif_carrier_ok(dev))
136 netdev_err(dev, "Attempt to restart for bus-off recovery, but carrier is OK?\n");
137
138 /* No synchronization needed because the device is bus-off and
139 * no messages can come in or go out.
140 */
141 can_flush_echo_skb(dev);
142
143 /* send restart message upstream */
144 skb = alloc_can_err_skb(dev, &cf);
145 if (!skb)
146 goto restart;
147
148 cf->can_id |= CAN_ERR_RESTARTED;
149
150 netif_rx(skb);
151
152 restart:
153 netdev_dbg(dev, "restarted\n");
154 priv->can_stats.restarts++;
155
156 /* Now restart the device */
157 netif_carrier_on(dev);
158 err = priv->do_set_mode(dev, CAN_MODE_START);
159 if (err) {
160 netdev_err(dev, "Error %d during restart", err);
161 netif_carrier_off(dev);
162 }
163 }
164
can_restart_work(struct work_struct * work)165 static void can_restart_work(struct work_struct *work)
166 {
167 struct delayed_work *dwork = to_delayed_work(work);
168 struct can_priv *priv = container_of(dwork, struct can_priv,
169 restart_work);
170
171 can_restart(priv->dev);
172 }
173
can_restart_now(struct net_device * dev)174 int can_restart_now(struct net_device *dev)
175 {
176 struct can_priv *priv = netdev_priv(dev);
177
178 /* A manual restart is only permitted if automatic restart is
179 * disabled and the device is in the bus-off state
180 */
181 if (priv->restart_ms)
182 return -EINVAL;
183 if (priv->state != CAN_STATE_BUS_OFF)
184 return -EBUSY;
185
186 cancel_delayed_work_sync(&priv->restart_work);
187 can_restart(dev);
188
189 return 0;
190 }
191
192 /* CAN bus-off
193 *
194 * This functions should be called when the device goes bus-off to
195 * tell the netif layer that no more packets can be sent or received.
196 * If enabled, a timer is started to trigger bus-off recovery.
197 */
can_bus_off(struct net_device * dev)198 void can_bus_off(struct net_device *dev)
199 {
200 struct can_priv *priv = netdev_priv(dev);
201
202 if (priv->restart_ms)
203 netdev_info(dev, "bus-off, scheduling restart in %d ms\n",
204 priv->restart_ms);
205 else
206 netdev_info(dev, "bus-off\n");
207
208 netif_carrier_off(dev);
209
210 if (priv->restart_ms)
211 schedule_delayed_work(&priv->restart_work,
212 msecs_to_jiffies(priv->restart_ms));
213 }
214 EXPORT_SYMBOL_GPL(can_bus_off);
215
can_setup(struct net_device * dev)216 void can_setup(struct net_device *dev)
217 {
218 dev->type = ARPHRD_CAN;
219 dev->mtu = CAN_MTU;
220 dev->hard_header_len = 0;
221 dev->addr_len = 0;
222 dev->tx_queue_len = 10;
223
224 /* New-style flags. */
225 dev->flags = IFF_NOARP;
226 dev->features = NETIF_F_HW_CSUM;
227 }
228
229 /* Allocate and setup space for the CAN network device */
alloc_candev_mqs(int sizeof_priv,unsigned int echo_skb_max,unsigned int txqs,unsigned int rxqs)230 struct net_device *alloc_candev_mqs(int sizeof_priv, unsigned int echo_skb_max,
231 unsigned int txqs, unsigned int rxqs)
232 {
233 struct can_ml_priv *can_ml;
234 struct net_device *dev;
235 struct can_priv *priv;
236 int size;
237
238 /* We put the driver's priv, the CAN mid layer priv and the
239 * echo skb into the netdevice's priv. The memory layout for
240 * the netdev_priv is like this:
241 *
242 * +-------------------------+
243 * | driver's priv |
244 * +-------------------------+
245 * | struct can_ml_priv |
246 * +-------------------------+
247 * | array of struct sk_buff |
248 * +-------------------------+
249 */
250
251 size = ALIGN(sizeof_priv, NETDEV_ALIGN) + sizeof(struct can_ml_priv);
252
253 if (echo_skb_max)
254 size = ALIGN(size, sizeof(struct sk_buff *)) +
255 echo_skb_max * sizeof(struct sk_buff *);
256
257 dev = alloc_netdev_mqs(size, "can%d", NET_NAME_UNKNOWN, can_setup,
258 txqs, rxqs);
259 if (!dev)
260 return NULL;
261
262 priv = netdev_priv(dev);
263 priv->dev = dev;
264
265 can_ml = (void *)priv + ALIGN(sizeof_priv, NETDEV_ALIGN);
266 can_set_ml_priv(dev, can_ml);
267
268 if (echo_skb_max) {
269 priv->echo_skb_max = echo_skb_max;
270 priv->echo_skb = (void *)priv +
271 (size - echo_skb_max * sizeof(struct sk_buff *));
272 }
273
274 priv->state = CAN_STATE_STOPPED;
275
276 INIT_DELAYED_WORK(&priv->restart_work, can_restart_work);
277
278 return dev;
279 }
280 EXPORT_SYMBOL_GPL(alloc_candev_mqs);
281
282 /* Free space of the CAN network device */
free_candev(struct net_device * dev)283 void free_candev(struct net_device *dev)
284 {
285 free_netdev(dev);
286 }
287 EXPORT_SYMBOL_GPL(free_candev);
288
289 /* changing MTU and control mode for CAN/CANFD devices */
can_change_mtu(struct net_device * dev,int new_mtu)290 int can_change_mtu(struct net_device *dev, int new_mtu)
291 {
292 struct can_priv *priv = netdev_priv(dev);
293 u32 ctrlmode_static = can_get_static_ctrlmode(priv);
294
295 /* Do not allow changing the MTU while running */
296 if (dev->flags & IFF_UP)
297 return -EBUSY;
298
299 /* allow change of MTU according to the CANFD ability of the device */
300 switch (new_mtu) {
301 case CAN_MTU:
302 /* 'CANFD-only' controllers can not switch to CAN_MTU */
303 if (ctrlmode_static & CAN_CTRLMODE_FD)
304 return -EINVAL;
305
306 priv->ctrlmode &= ~CAN_CTRLMODE_FD;
307 break;
308
309 case CANFD_MTU:
310 /* check for potential CANFD ability */
311 if (!(priv->ctrlmode_supported & CAN_CTRLMODE_FD) &&
312 !(ctrlmode_static & CAN_CTRLMODE_FD))
313 return -EINVAL;
314
315 priv->ctrlmode |= CAN_CTRLMODE_FD;
316 break;
317
318 default:
319 return -EINVAL;
320 }
321
322 dev->mtu = new_mtu;
323 return 0;
324 }
325 EXPORT_SYMBOL_GPL(can_change_mtu);
326
327 /* generic implementation of netdev_ops::ndo_eth_ioctl for CAN devices
328 * supporting hardware timestamps
329 */
can_eth_ioctl_hwts(struct net_device * netdev,struct ifreq * ifr,int cmd)330 int can_eth_ioctl_hwts(struct net_device *netdev, struct ifreq *ifr, int cmd)
331 {
332 struct hwtstamp_config hwts_cfg = { 0 };
333
334 switch (cmd) {
335 case SIOCSHWTSTAMP: /* set */
336 if (copy_from_user(&hwts_cfg, ifr->ifr_data, sizeof(hwts_cfg)))
337 return -EFAULT;
338 if (hwts_cfg.tx_type == HWTSTAMP_TX_ON &&
339 hwts_cfg.rx_filter == HWTSTAMP_FILTER_ALL)
340 return 0;
341 return -ERANGE;
342
343 case SIOCGHWTSTAMP: /* get */
344 hwts_cfg.tx_type = HWTSTAMP_TX_ON;
345 hwts_cfg.rx_filter = HWTSTAMP_FILTER_ALL;
346 if (copy_to_user(ifr->ifr_data, &hwts_cfg, sizeof(hwts_cfg)))
347 return -EFAULT;
348 return 0;
349
350 default:
351 return -EOPNOTSUPP;
352 }
353 }
354 EXPORT_SYMBOL(can_eth_ioctl_hwts);
355
356 /* generic implementation of ethtool_ops::get_ts_info for CAN devices
357 * supporting hardware timestamps
358 */
can_ethtool_op_get_ts_info_hwts(struct net_device * dev,struct ethtool_ts_info * info)359 int can_ethtool_op_get_ts_info_hwts(struct net_device *dev,
360 struct ethtool_ts_info *info)
361 {
362 info->so_timestamping =
363 SOF_TIMESTAMPING_TX_SOFTWARE |
364 SOF_TIMESTAMPING_RX_SOFTWARE |
365 SOF_TIMESTAMPING_SOFTWARE |
366 SOF_TIMESTAMPING_TX_HARDWARE |
367 SOF_TIMESTAMPING_RX_HARDWARE |
368 SOF_TIMESTAMPING_RAW_HARDWARE;
369 info->phc_index = -1;
370 info->tx_types = BIT(HWTSTAMP_TX_ON);
371 info->rx_filters = BIT(HWTSTAMP_FILTER_ALL);
372
373 return 0;
374 }
375 EXPORT_SYMBOL(can_ethtool_op_get_ts_info_hwts);
376
377 /* Common open function when the device gets opened.
378 *
379 * This function should be called in the open function of the device
380 * driver.
381 */
open_candev(struct net_device * dev)382 int open_candev(struct net_device *dev)
383 {
384 struct can_priv *priv = netdev_priv(dev);
385
386 if (!priv->bittiming.bitrate) {
387 netdev_err(dev, "bit-timing not yet defined\n");
388 return -EINVAL;
389 }
390
391 /* For CAN FD the data bitrate has to be >= the arbitration bitrate */
392 if ((priv->ctrlmode & CAN_CTRLMODE_FD) &&
393 (!priv->data_bittiming.bitrate ||
394 priv->data_bittiming.bitrate < priv->bittiming.bitrate)) {
395 netdev_err(dev, "incorrect/missing data bit-timing\n");
396 return -EINVAL;
397 }
398
399 /* Switch carrier on if device was stopped while in bus-off state */
400 if (!netif_carrier_ok(dev))
401 netif_carrier_on(dev);
402
403 return 0;
404 }
405 EXPORT_SYMBOL_GPL(open_candev);
406
407 #ifdef CONFIG_OF
408 /* Common function that can be used to understand the limitation of
409 * a transceiver when it provides no means to determine these limitations
410 * at runtime.
411 */
of_can_transceiver(struct net_device * dev)412 void of_can_transceiver(struct net_device *dev)
413 {
414 struct device_node *dn;
415 struct can_priv *priv = netdev_priv(dev);
416 struct device_node *np = dev->dev.parent->of_node;
417 int ret;
418
419 dn = of_get_child_by_name(np, "can-transceiver");
420 if (!dn)
421 return;
422
423 ret = of_property_read_u32(dn, "max-bitrate", &priv->bitrate_max);
424 of_node_put(dn);
425 if ((ret && ret != -EINVAL) || (!ret && !priv->bitrate_max))
426 netdev_warn(dev, "Invalid value for transceiver max bitrate. Ignoring bitrate limit.\n");
427 }
428 EXPORT_SYMBOL_GPL(of_can_transceiver);
429 #endif
430
431 /* Common close function for cleanup before the device gets closed.
432 *
433 * This function should be called in the close function of the device
434 * driver.
435 */
close_candev(struct net_device * dev)436 void close_candev(struct net_device *dev)
437 {
438 struct can_priv *priv = netdev_priv(dev);
439
440 cancel_delayed_work_sync(&priv->restart_work);
441 can_flush_echo_skb(dev);
442 }
443 EXPORT_SYMBOL_GPL(close_candev);
444
can_set_termination(struct net_device * ndev,u16 term)445 static int can_set_termination(struct net_device *ndev, u16 term)
446 {
447 struct can_priv *priv = netdev_priv(ndev);
448 int set;
449
450 if (term == priv->termination_gpio_ohms[CAN_TERMINATION_GPIO_ENABLED])
451 set = 1;
452 else
453 set = 0;
454
455 gpiod_set_value(priv->termination_gpio, set);
456
457 return 0;
458 }
459
can_get_termination(struct net_device * ndev)460 static int can_get_termination(struct net_device *ndev)
461 {
462 struct can_priv *priv = netdev_priv(ndev);
463 struct device *dev = ndev->dev.parent;
464 struct gpio_desc *gpio;
465 u32 term;
466 int ret;
467
468 /* Disabling termination by default is the safe choice: Else if many
469 * bus participants enable it, no communication is possible at all.
470 */
471 gpio = devm_gpiod_get_optional(dev, "termination", GPIOD_OUT_LOW);
472 if (IS_ERR(gpio))
473 return dev_err_probe(dev, PTR_ERR(gpio),
474 "Cannot get termination-gpios\n");
475
476 if (!gpio)
477 return 0;
478
479 ret = device_property_read_u32(dev, "termination-ohms", &term);
480 if (ret) {
481 netdev_err(ndev, "Cannot get termination-ohms: %pe\n",
482 ERR_PTR(ret));
483 return ret;
484 }
485
486 if (term > U16_MAX) {
487 netdev_err(ndev, "Invalid termination-ohms value (%u > %u)\n",
488 term, U16_MAX);
489 return -EINVAL;
490 }
491
492 priv->termination_const_cnt = ARRAY_SIZE(priv->termination_gpio_ohms);
493 priv->termination_const = priv->termination_gpio_ohms;
494 priv->termination_gpio = gpio;
495 priv->termination_gpio_ohms[CAN_TERMINATION_GPIO_DISABLED] =
496 CAN_TERMINATION_DISABLED;
497 priv->termination_gpio_ohms[CAN_TERMINATION_GPIO_ENABLED] = term;
498 priv->do_set_termination = can_set_termination;
499
500 return 0;
501 }
502
503 static bool
can_bittiming_const_valid(const struct can_bittiming_const * btc)504 can_bittiming_const_valid(const struct can_bittiming_const *btc)
505 {
506 if (!btc)
507 return true;
508
509 if (!btc->sjw_max)
510 return false;
511
512 return true;
513 }
514
515 /* Register the CAN network device */
register_candev(struct net_device * dev)516 int register_candev(struct net_device *dev)
517 {
518 struct can_priv *priv = netdev_priv(dev);
519 int err;
520
521 /* Ensure termination_const, termination_const_cnt and
522 * do_set_termination consistency. All must be either set or
523 * unset.
524 */
525 if ((!priv->termination_const != !priv->termination_const_cnt) ||
526 (!priv->termination_const != !priv->do_set_termination))
527 return -EINVAL;
528
529 if (!priv->bitrate_const != !priv->bitrate_const_cnt)
530 return -EINVAL;
531
532 if (!priv->data_bitrate_const != !priv->data_bitrate_const_cnt)
533 return -EINVAL;
534
535 /* We only support either fixed bit rates or bit timing const. */
536 if ((priv->bitrate_const || priv->data_bitrate_const) &&
537 (priv->bittiming_const || priv->data_bittiming_const))
538 return -EINVAL;
539
540 if (!can_bittiming_const_valid(priv->bittiming_const) ||
541 !can_bittiming_const_valid(priv->data_bittiming_const))
542 return -EINVAL;
543
544 if (!priv->termination_const) {
545 err = can_get_termination(dev);
546 if (err)
547 return err;
548 }
549
550 dev->rtnl_link_ops = &can_link_ops;
551 netif_carrier_off(dev);
552
553 return register_netdev(dev);
554 }
555 EXPORT_SYMBOL_GPL(register_candev);
556
557 /* Unregister the CAN network device */
unregister_candev(struct net_device * dev)558 void unregister_candev(struct net_device *dev)
559 {
560 unregister_netdev(dev);
561 }
562 EXPORT_SYMBOL_GPL(unregister_candev);
563
564 /* Test if a network device is a candev based device
565 * and return the can_priv* if so.
566 */
safe_candev_priv(struct net_device * dev)567 struct can_priv *safe_candev_priv(struct net_device *dev)
568 {
569 if (dev->type != ARPHRD_CAN || dev->rtnl_link_ops != &can_link_ops)
570 return NULL;
571
572 return netdev_priv(dev);
573 }
574 EXPORT_SYMBOL_GPL(safe_candev_priv);
575
can_dev_init(void)576 static __init int can_dev_init(void)
577 {
578 int err;
579
580 err = can_netlink_register();
581 if (!err)
582 pr_info("CAN device driver interface\n");
583
584 return err;
585 }
586 module_init(can_dev_init);
587
can_dev_exit(void)588 static __exit void can_dev_exit(void)
589 {
590 can_netlink_unregister();
591 }
592 module_exit(can_dev_exit);
593
594 MODULE_ALIAS_RTNL_LINK("can");
595