1 /* 2 * Platform CAN bus driver for Bosch C_CAN controller 3 * 4 * Copyright (C) 2010 ST Microelectronics 5 * Bhupesh Sharma <bhupesh.sharma@st.com> 6 * 7 * Borrowed heavily from the C_CAN driver originally written by: 8 * Copyright (C) 2007 9 * - Sascha Hauer, Marc Kleine-Budde, Pengutronix <s.hauer@pengutronix.de> 10 * - Simon Kallweit, intefo AG <simon.kallweit@intefo.ch> 11 * 12 * Bosch C_CAN controller is compliant to CAN protocol version 2.0 part A and B. 13 * Bosch C_CAN user manual can be obtained from: 14 * http://www.semiconductors.bosch.de/media/en/pdf/ipmodules_1/c_can/ 15 * users_manual_c_can.pdf 16 * 17 * This file is licensed under the terms of the GNU General Public 18 * License version 2. This program is licensed "as is" without any 19 * warranty of any kind, whether express or implied. 20 */ 21 22 #include <linux/kernel.h> 23 #include <linux/module.h> 24 #include <linux/interrupt.h> 25 #include <linux/delay.h> 26 #include <linux/netdevice.h> 27 #include <linux/if_arp.h> 28 #include <linux/if_ether.h> 29 #include <linux/list.h> 30 #include <linux/io.h> 31 #include <linux/platform_device.h> 32 #include <linux/pm_runtime.h> 33 #include <linux/clk.h> 34 #include <linux/of.h> 35 #include <linux/of_device.h> 36 #include <linux/mfd/syscon.h> 37 #include <linux/regmap.h> 38 39 #include <linux/can/dev.h> 40 41 #include "c_can.h" 42 43 #define DCAN_RAM_INIT_BIT BIT(3) 44 45 static DEFINE_SPINLOCK(raminit_lock); 46 47 /* 16-bit c_can registers can be arranged differently in the memory 48 * architecture of different implementations. For example: 16-bit 49 * registers can be aligned to a 16-bit boundary or 32-bit boundary etc. 50 * Handle the same by providing a common read/write interface. 51 */ 52 static u16 c_can_plat_read_reg_aligned_to_16bit(const struct c_can_priv *priv, 53 enum reg index) 54 { 55 return readw(priv->base + priv->regs[index]); 56 } 57 58 static void c_can_plat_write_reg_aligned_to_16bit(const struct c_can_priv *priv, 59 enum reg index, u16 val) 60 { 61 writew(val, priv->base + priv->regs[index]); 62 } 63 64 static u16 c_can_plat_read_reg_aligned_to_32bit(const struct c_can_priv *priv, 65 enum reg index) 66 { 67 return readw(priv->base + 2 * priv->regs[index]); 68 } 69 70 static void c_can_plat_write_reg_aligned_to_32bit(const struct c_can_priv *priv, 71 enum reg index, u16 val) 72 { 73 writew(val, priv->base + 2 * priv->regs[index]); 74 } 75 76 static void c_can_hw_raminit_wait_syscon(const struct c_can_priv *priv, 77 u32 mask, u32 val) 78 { 79 const struct c_can_raminit *raminit = &priv->raminit_sys; 80 int timeout = 0; 81 u32 ctrl = 0; 82 83 /* We look only at the bits of our instance. */ 84 val &= mask; 85 do { 86 udelay(1); 87 timeout++; 88 89 regmap_read(raminit->syscon, raminit->reg, &ctrl); 90 if (timeout == 1000) { 91 dev_err(&priv->dev->dev, "%s: time out\n", __func__); 92 break; 93 } 94 } while ((ctrl & mask) != val); 95 } 96 97 static void c_can_hw_raminit_syscon(const struct c_can_priv *priv, bool enable) 98 { 99 const struct c_can_raminit *raminit = &priv->raminit_sys; 100 u32 ctrl = 0; 101 u32 mask; 102 103 spin_lock(&raminit_lock); 104 105 mask = 1 << raminit->bits.start | 1 << raminit->bits.done; 106 regmap_read(raminit->syscon, raminit->reg, &ctrl); 107 108 /* We clear the start bit first. The start bit is 109 * looking at the 0 -> transition, but is not self clearing; 110 * NOTE: DONE must be written with 1 to clear it. 111 * We can't clear the DONE bit here using regmap_update_bits() 112 * as it will bypass the write if initial condition is START:0 DONE:1 113 * e.g. on DRA7 which needs START pulse. 114 */ 115 ctrl &= ~mask; /* START = 0, DONE = 0 */ 116 regmap_update_bits(raminit->syscon, raminit->reg, mask, ctrl); 117 118 /* check if START bit is 0. Ignore DONE bit for now 119 * as it can be either 0 or 1. 120 */ 121 c_can_hw_raminit_wait_syscon(priv, 1 << raminit->bits.start, ctrl); 122 123 if (enable) { 124 /* Clear DONE bit & set START bit. */ 125 ctrl |= 1 << raminit->bits.start; 126 /* DONE must be written with 1 to clear it */ 127 ctrl |= 1 << raminit->bits.done; 128 regmap_update_bits(raminit->syscon, raminit->reg, mask, ctrl); 129 /* prevent further clearing of DONE bit */ 130 ctrl &= ~(1 << raminit->bits.done); 131 /* clear START bit if start pulse is needed */ 132 if (raminit->needs_pulse) { 133 ctrl &= ~(1 << raminit->bits.start); 134 regmap_update_bits(raminit->syscon, raminit->reg, 135 mask, ctrl); 136 } 137 138 ctrl |= 1 << raminit->bits.done; 139 c_can_hw_raminit_wait_syscon(priv, mask, ctrl); 140 } 141 spin_unlock(&raminit_lock); 142 } 143 144 static u32 c_can_plat_read_reg32(const struct c_can_priv *priv, enum reg index) 145 { 146 u32 val; 147 148 val = priv->read_reg(priv, index); 149 val |= ((u32)priv->read_reg(priv, index + 1)) << 16; 150 151 return val; 152 } 153 154 static void c_can_plat_write_reg32(const struct c_can_priv *priv, 155 enum reg index, u32 val) 156 { 157 priv->write_reg(priv, index + 1, val >> 16); 158 priv->write_reg(priv, index, val); 159 } 160 161 static u32 d_can_plat_read_reg32(const struct c_can_priv *priv, enum reg index) 162 { 163 return readl(priv->base + priv->regs[index]); 164 } 165 166 static void d_can_plat_write_reg32(const struct c_can_priv *priv, 167 enum reg index, u32 val) 168 { 169 writel(val, priv->base + priv->regs[index]); 170 } 171 172 static void c_can_hw_raminit_wait(const struct c_can_priv *priv, u32 mask) 173 { 174 while (priv->read_reg32(priv, C_CAN_FUNCTION_REG) & mask) 175 udelay(1); 176 } 177 178 static void c_can_hw_raminit(const struct c_can_priv *priv, bool enable) 179 { 180 u32 ctrl; 181 182 ctrl = priv->read_reg32(priv, C_CAN_FUNCTION_REG); 183 ctrl &= ~DCAN_RAM_INIT_BIT; 184 priv->write_reg32(priv, C_CAN_FUNCTION_REG, ctrl); 185 c_can_hw_raminit_wait(priv, ctrl); 186 187 if (enable) { 188 ctrl |= DCAN_RAM_INIT_BIT; 189 priv->write_reg32(priv, C_CAN_FUNCTION_REG, ctrl); 190 c_can_hw_raminit_wait(priv, ctrl); 191 } 192 } 193 194 static const struct c_can_driver_data c_can_drvdata = { 195 .id = BOSCH_C_CAN, 196 .msg_obj_num = 32, 197 }; 198 199 static const struct c_can_driver_data d_can_drvdata = { 200 .id = BOSCH_D_CAN, 201 .msg_obj_num = 32, 202 }; 203 204 static const struct raminit_bits dra7_raminit_bits[] = { 205 [0] = { .start = 3, .done = 1, }, 206 [1] = { .start = 5, .done = 2, }, 207 }; 208 209 static const struct c_can_driver_data dra7_dcan_drvdata = { 210 .id = BOSCH_D_CAN, 211 .msg_obj_num = 64, 212 .raminit_num = ARRAY_SIZE(dra7_raminit_bits), 213 .raminit_bits = dra7_raminit_bits, 214 .raminit_pulse = true, 215 }; 216 217 static const struct raminit_bits am3352_raminit_bits[] = { 218 [0] = { .start = 0, .done = 8, }, 219 [1] = { .start = 1, .done = 9, }, 220 }; 221 222 static const struct c_can_driver_data am3352_dcan_drvdata = { 223 .id = BOSCH_D_CAN, 224 .msg_obj_num = 64, 225 .raminit_num = ARRAY_SIZE(am3352_raminit_bits), 226 .raminit_bits = am3352_raminit_bits, 227 }; 228 229 static const struct platform_device_id c_can_id_table[] = { 230 { 231 .name = KBUILD_MODNAME, 232 .driver_data = (kernel_ulong_t)&c_can_drvdata, 233 }, 234 { 235 .name = "c_can", 236 .driver_data = (kernel_ulong_t)&c_can_drvdata, 237 }, 238 { 239 .name = "d_can", 240 .driver_data = (kernel_ulong_t)&d_can_drvdata, 241 }, 242 { /* sentinel */ }, 243 }; 244 MODULE_DEVICE_TABLE(platform, c_can_id_table); 245 246 static const struct of_device_id c_can_of_table[] = { 247 { .compatible = "bosch,c_can", .data = &c_can_drvdata }, 248 { .compatible = "bosch,d_can", .data = &d_can_drvdata }, 249 { .compatible = "ti,dra7-d_can", .data = &dra7_dcan_drvdata }, 250 { .compatible = "ti,am3352-d_can", .data = &am3352_dcan_drvdata }, 251 { .compatible = "ti,am4372-d_can", .data = &am3352_dcan_drvdata }, 252 { /* sentinel */ }, 253 }; 254 MODULE_DEVICE_TABLE(of, c_can_of_table); 255 256 static int c_can_plat_probe(struct platform_device *pdev) 257 { 258 int ret; 259 void __iomem *addr; 260 struct net_device *dev; 261 struct c_can_priv *priv; 262 const struct of_device_id *match; 263 struct resource *mem; 264 int irq; 265 struct clk *clk; 266 const struct c_can_driver_data *drvdata; 267 struct device_node *np = pdev->dev.of_node; 268 269 match = of_match_device(c_can_of_table, &pdev->dev); 270 if (match) { 271 drvdata = match->data; 272 } else if (pdev->id_entry->driver_data) { 273 drvdata = (struct c_can_driver_data *) 274 platform_get_device_id(pdev)->driver_data; 275 } else { 276 return -ENODEV; 277 } 278 279 /* get the appropriate clk */ 280 clk = devm_clk_get(&pdev->dev, NULL); 281 if (IS_ERR(clk)) { 282 ret = PTR_ERR(clk); 283 goto exit; 284 } 285 286 /* get the platform data */ 287 irq = platform_get_irq(pdev, 0); 288 if (irq <= 0) { 289 ret = -ENODEV; 290 goto exit; 291 } 292 293 mem = platform_get_resource(pdev, IORESOURCE_MEM, 0); 294 addr = devm_ioremap_resource(&pdev->dev, mem); 295 if (IS_ERR(addr)) { 296 ret = PTR_ERR(addr); 297 goto exit; 298 } 299 300 /* allocate the c_can device */ 301 dev = alloc_c_can_dev(drvdata->msg_obj_num); 302 if (!dev) { 303 ret = -ENOMEM; 304 goto exit; 305 } 306 307 priv = netdev_priv(dev); 308 switch (drvdata->id) { 309 case BOSCH_C_CAN: 310 priv->regs = reg_map_c_can; 311 switch (mem->flags & IORESOURCE_MEM_TYPE_MASK) { 312 case IORESOURCE_MEM_32BIT: 313 priv->read_reg = c_can_plat_read_reg_aligned_to_32bit; 314 priv->write_reg = c_can_plat_write_reg_aligned_to_32bit; 315 priv->read_reg32 = c_can_plat_read_reg32; 316 priv->write_reg32 = c_can_plat_write_reg32; 317 break; 318 case IORESOURCE_MEM_16BIT: 319 default: 320 priv->read_reg = c_can_plat_read_reg_aligned_to_16bit; 321 priv->write_reg = c_can_plat_write_reg_aligned_to_16bit; 322 priv->read_reg32 = c_can_plat_read_reg32; 323 priv->write_reg32 = c_can_plat_write_reg32; 324 break; 325 } 326 break; 327 case BOSCH_D_CAN: 328 priv->regs = reg_map_d_can; 329 priv->read_reg = c_can_plat_read_reg_aligned_to_16bit; 330 priv->write_reg = c_can_plat_write_reg_aligned_to_16bit; 331 priv->read_reg32 = d_can_plat_read_reg32; 332 priv->write_reg32 = d_can_plat_write_reg32; 333 334 /* Check if we need custom RAMINIT via syscon. Mostly for TI 335 * platforms. Only supported with DT boot. 336 */ 337 if (np && of_property_read_bool(np, "syscon-raminit")) { 338 u32 id; 339 struct c_can_raminit *raminit = &priv->raminit_sys; 340 341 ret = -EINVAL; 342 raminit->syscon = syscon_regmap_lookup_by_phandle(np, 343 "syscon-raminit"); 344 if (IS_ERR(raminit->syscon)) { 345 /* can fail with -EPROBE_DEFER */ 346 ret = PTR_ERR(raminit->syscon); 347 free_c_can_dev(dev); 348 return ret; 349 } 350 351 if (of_property_read_u32_index(np, "syscon-raminit", 1, 352 &raminit->reg)) { 353 dev_err(&pdev->dev, 354 "couldn't get the RAMINIT reg. offset!\n"); 355 goto exit_free_device; 356 } 357 358 if (of_property_read_u32_index(np, "syscon-raminit", 2, 359 &id)) { 360 dev_err(&pdev->dev, 361 "couldn't get the CAN instance ID\n"); 362 goto exit_free_device; 363 } 364 365 if (id >= drvdata->raminit_num) { 366 dev_err(&pdev->dev, 367 "Invalid CAN instance ID\n"); 368 goto exit_free_device; 369 } 370 371 raminit->bits = drvdata->raminit_bits[id]; 372 raminit->needs_pulse = drvdata->raminit_pulse; 373 374 priv->raminit = c_can_hw_raminit_syscon; 375 } else { 376 priv->raminit = c_can_hw_raminit; 377 } 378 break; 379 default: 380 ret = -EINVAL; 381 goto exit_free_device; 382 } 383 384 dev->irq = irq; 385 priv->base = addr; 386 priv->device = &pdev->dev; 387 priv->can.clock.freq = clk_get_rate(clk); 388 priv->type = drvdata->id; 389 390 platform_set_drvdata(pdev, dev); 391 SET_NETDEV_DEV(dev, &pdev->dev); 392 393 pm_runtime_enable(priv->device); 394 ret = register_c_can_dev(dev); 395 if (ret) { 396 dev_err(&pdev->dev, "registering %s failed (err=%d)\n", 397 KBUILD_MODNAME, ret); 398 goto exit_free_device; 399 } 400 401 dev_info(&pdev->dev, "%s device registered (regs=%p, irq=%d)\n", 402 KBUILD_MODNAME, priv->base, dev->irq); 403 return 0; 404 405 exit_free_device: 406 pm_runtime_disable(priv->device); 407 free_c_can_dev(dev); 408 exit: 409 dev_err(&pdev->dev, "probe failed\n"); 410 411 return ret; 412 } 413 414 static int c_can_plat_remove(struct platform_device *pdev) 415 { 416 struct net_device *dev = platform_get_drvdata(pdev); 417 struct c_can_priv *priv = netdev_priv(dev); 418 419 unregister_c_can_dev(dev); 420 pm_runtime_disable(priv->device); 421 free_c_can_dev(dev); 422 423 return 0; 424 } 425 426 #ifdef CONFIG_PM 427 static int c_can_suspend(struct platform_device *pdev, pm_message_t state) 428 { 429 int ret; 430 struct net_device *ndev = platform_get_drvdata(pdev); 431 struct c_can_priv *priv = netdev_priv(ndev); 432 433 if (priv->type != BOSCH_D_CAN) { 434 dev_warn(&pdev->dev, "Not supported\n"); 435 return 0; 436 } 437 438 if (netif_running(ndev)) { 439 netif_stop_queue(ndev); 440 netif_device_detach(ndev); 441 } 442 443 ret = c_can_power_down(ndev); 444 if (ret) { 445 netdev_err(ndev, "failed to enter power down mode\n"); 446 return ret; 447 } 448 449 priv->can.state = CAN_STATE_SLEEPING; 450 451 return 0; 452 } 453 454 static int c_can_resume(struct platform_device *pdev) 455 { 456 int ret; 457 struct net_device *ndev = platform_get_drvdata(pdev); 458 struct c_can_priv *priv = netdev_priv(ndev); 459 460 if (priv->type != BOSCH_D_CAN) { 461 dev_warn(&pdev->dev, "Not supported\n"); 462 return 0; 463 } 464 465 ret = c_can_power_up(ndev); 466 if (ret) { 467 netdev_err(ndev, "Still in power down mode\n"); 468 return ret; 469 } 470 471 priv->can.state = CAN_STATE_ERROR_ACTIVE; 472 473 if (netif_running(ndev)) { 474 netif_device_attach(ndev); 475 netif_start_queue(ndev); 476 } 477 478 return 0; 479 } 480 #else 481 #define c_can_suspend NULL 482 #define c_can_resume NULL 483 #endif 484 485 static struct platform_driver c_can_plat_driver = { 486 .driver = { 487 .name = KBUILD_MODNAME, 488 .of_match_table = c_can_of_table, 489 }, 490 .probe = c_can_plat_probe, 491 .remove = c_can_plat_remove, 492 .suspend = c_can_suspend, 493 .resume = c_can_resume, 494 .id_table = c_can_id_table, 495 }; 496 497 module_platform_driver(c_can_plat_driver); 498 499 MODULE_AUTHOR("Bhupesh Sharma <bhupesh.sharma@st.com>"); 500 MODULE_LICENSE("GPL v2"); 501 MODULE_DESCRIPTION("Platform CAN bus driver for Bosch C_CAN controller"); 502