1 /* 2 * PCI bus driver for Bosch C_CAN/D_CAN controller 3 * 4 * Copyright (C) 2012 Federico Vaga <federico.vaga@gmail.com> 5 * 6 * Borrowed from c_can_platform.c 7 * 8 * This file is licensed under the terms of the GNU General Public 9 * License version 2. This program is licensed "as is" without any 10 * warranty of any kind, whether express or implied. 11 */ 12 13 #include <linux/kernel.h> 14 #include <linux/module.h> 15 #include <linux/netdevice.h> 16 #include <linux/pci.h> 17 18 #include <linux/can/dev.h> 19 20 #include "c_can.h" 21 22 enum c_can_pci_reg_align { 23 C_CAN_REG_ALIGN_16, 24 C_CAN_REG_ALIGN_32, 25 }; 26 27 struct c_can_pci_data { 28 /* Specify if is C_CAN or D_CAN */ 29 enum c_can_dev_id type; 30 /* Set the register alignment in the memory */ 31 enum c_can_pci_reg_align reg_align; 32 /* Set the frequency */ 33 unsigned int freq; 34 }; 35 36 /* 37 * 16-bit c_can registers can be arranged differently in the memory 38 * architecture of different implementations. For example: 16-bit 39 * registers can be aligned to a 16-bit boundary or 32-bit boundary etc. 40 * Handle the same by providing a common read/write interface. 41 */ 42 static u16 c_can_pci_read_reg_aligned_to_16bit(struct c_can_priv *priv, 43 enum reg index) 44 { 45 return readw(priv->base + priv->regs[index]); 46 } 47 48 static void c_can_pci_write_reg_aligned_to_16bit(struct c_can_priv *priv, 49 enum reg index, u16 val) 50 { 51 writew(val, priv->base + priv->regs[index]); 52 } 53 54 static u16 c_can_pci_read_reg_aligned_to_32bit(struct c_can_priv *priv, 55 enum reg index) 56 { 57 return readw(priv->base + 2 * priv->regs[index]); 58 } 59 60 static void c_can_pci_write_reg_aligned_to_32bit(struct c_can_priv *priv, 61 enum reg index, u16 val) 62 { 63 writew(val, priv->base + 2 * priv->regs[index]); 64 } 65 66 static int c_can_pci_probe(struct pci_dev *pdev, 67 const struct pci_device_id *ent) 68 { 69 struct c_can_pci_data *c_can_pci_data = (void *)ent->driver_data; 70 struct c_can_priv *priv; 71 struct net_device *dev; 72 void __iomem *addr; 73 int ret; 74 75 ret = pci_enable_device(pdev); 76 if (ret) { 77 dev_err(&pdev->dev, "pci_enable_device FAILED\n"); 78 goto out; 79 } 80 81 ret = pci_request_regions(pdev, KBUILD_MODNAME); 82 if (ret) { 83 dev_err(&pdev->dev, "pci_request_regions FAILED\n"); 84 goto out_disable_device; 85 } 86 87 pci_set_master(pdev); 88 pci_enable_msi(pdev); 89 90 addr = pci_iomap(pdev, 0, pci_resource_len(pdev, 0)); 91 if (!addr) { 92 dev_err(&pdev->dev, 93 "device has no PCI memory resources, " 94 "failing adapter\n"); 95 ret = -ENOMEM; 96 goto out_release_regions; 97 } 98 99 /* allocate the c_can device */ 100 dev = alloc_c_can_dev(); 101 if (!dev) { 102 ret = -ENOMEM; 103 goto out_iounmap; 104 } 105 106 priv = netdev_priv(dev); 107 pci_set_drvdata(pdev, dev); 108 SET_NETDEV_DEV(dev, &pdev->dev); 109 110 dev->irq = pdev->irq; 111 priv->base = addr; 112 113 if (!c_can_pci_data->freq) { 114 dev_err(&pdev->dev, "no clock frequency defined\n"); 115 ret = -ENODEV; 116 goto out_free_c_can; 117 } else { 118 priv->can.clock.freq = c_can_pci_data->freq; 119 } 120 121 /* Configure CAN type */ 122 switch (c_can_pci_data->type) { 123 case BOSCH_C_CAN: 124 priv->regs = reg_map_c_can; 125 break; 126 case BOSCH_D_CAN: 127 priv->regs = reg_map_d_can; 128 priv->can.ctrlmode_supported |= CAN_CTRLMODE_3_SAMPLES; 129 break; 130 default: 131 ret = -EINVAL; 132 goto out_free_c_can; 133 } 134 135 /* Configure access to registers */ 136 switch (c_can_pci_data->reg_align) { 137 case C_CAN_REG_ALIGN_32: 138 priv->read_reg = c_can_pci_read_reg_aligned_to_32bit; 139 priv->write_reg = c_can_pci_write_reg_aligned_to_32bit; 140 break; 141 case C_CAN_REG_ALIGN_16: 142 priv->read_reg = c_can_pci_read_reg_aligned_to_16bit; 143 priv->write_reg = c_can_pci_write_reg_aligned_to_16bit; 144 break; 145 default: 146 ret = -EINVAL; 147 goto out_free_c_can; 148 } 149 150 ret = register_c_can_dev(dev); 151 if (ret) { 152 dev_err(&pdev->dev, "registering %s failed (err=%d)\n", 153 KBUILD_MODNAME, ret); 154 goto out_free_c_can; 155 } 156 157 dev_dbg(&pdev->dev, "%s device registered (regs=%p, irq=%d)\n", 158 KBUILD_MODNAME, priv->regs, dev->irq); 159 160 return 0; 161 162 out_free_c_can: 163 free_c_can_dev(dev); 164 out_iounmap: 165 pci_iounmap(pdev, addr); 166 out_release_regions: 167 pci_disable_msi(pdev); 168 pci_clear_master(pdev); 169 pci_release_regions(pdev); 170 out_disable_device: 171 pci_disable_device(pdev); 172 out: 173 return ret; 174 } 175 176 static void c_can_pci_remove(struct pci_dev *pdev) 177 { 178 struct net_device *dev = pci_get_drvdata(pdev); 179 struct c_can_priv *priv = netdev_priv(dev); 180 181 unregister_c_can_dev(dev); 182 183 free_c_can_dev(dev); 184 185 pci_iounmap(pdev, priv->base); 186 pci_disable_msi(pdev); 187 pci_clear_master(pdev); 188 pci_release_regions(pdev); 189 pci_disable_device(pdev); 190 } 191 192 static struct c_can_pci_data c_can_sta2x11= { 193 .type = BOSCH_C_CAN, 194 .reg_align = C_CAN_REG_ALIGN_32, 195 .freq = 52000000, /* 52 Mhz */ 196 }; 197 198 #define C_CAN_ID(_vend, _dev, _driverdata) { \ 199 PCI_DEVICE(_vend, _dev), \ 200 .driver_data = (unsigned long)&_driverdata, \ 201 } 202 static DEFINE_PCI_DEVICE_TABLE(c_can_pci_tbl) = { 203 C_CAN_ID(PCI_VENDOR_ID_STMICRO, PCI_DEVICE_ID_STMICRO_CAN, 204 c_can_sta2x11), 205 {}, 206 }; 207 static struct pci_driver c_can_pci_driver = { 208 .name = KBUILD_MODNAME, 209 .id_table = c_can_pci_tbl, 210 .probe = c_can_pci_probe, 211 .remove = c_can_pci_remove, 212 }; 213 214 module_pci_driver(c_can_pci_driver); 215 216 MODULE_AUTHOR("Federico Vaga <federico.vaga@gmail.com>"); 217 MODULE_LICENSE("GPL v2"); 218 MODULE_DESCRIPTION("PCI CAN bus driver for Bosch C_CAN/D_CAN controller"); 219 MODULE_DEVICE_TABLE(pci, c_can_pci_tbl); 220