1ccb29637SOliver Hartkoppmenu "CAN Device Drivers" 2ccb29637SOliver Hartkopp depends on CAN 3ccb29637SOliver Hartkopp 4ccb29637SOliver Hartkoppconfig CAN_VCAN 5ccb29637SOliver Hartkopp tristate "Virtual Local CAN Interface (vcan)" 6ccb29637SOliver Hartkopp depends on CAN 7ccb29637SOliver Hartkopp default N 8ccb29637SOliver Hartkopp ---help--- 9ccb29637SOliver Hartkopp Similar to the network loopback devices, vcan offers a 10ccb29637SOliver Hartkopp virtual local CAN interface. 11ccb29637SOliver Hartkopp 12ccb29637SOliver Hartkopp This driver can also be built as a module. If so, the module 13ccb29637SOliver Hartkopp will be called vcan. 14ccb29637SOliver Hartkopp 1539549eefSWolfgang Grandeggerconfig CAN_DEV 1639549eefSWolfgang Grandegger tristate "Platform CAN drivers with Netlink support" 1739549eefSWolfgang Grandegger depends on CAN 1839549eefSWolfgang Grandegger default Y 1939549eefSWolfgang Grandegger ---help--- 2039549eefSWolfgang Grandegger Enables the common framework for platform CAN drivers with Netlink 2139549eefSWolfgang Grandegger support. This is the standard library for CAN drivers. 2239549eefSWolfgang Grandegger If unsure, say Y. 2339549eefSWolfgang Grandegger 2439549eefSWolfgang Grandeggerconfig CAN_CALC_BITTIMING 2539549eefSWolfgang Grandegger bool "CAN bit-timing calculation" 2639549eefSWolfgang Grandegger depends on CAN_DEV 2739549eefSWolfgang Grandegger default Y 2839549eefSWolfgang Grandegger ---help--- 2939549eefSWolfgang Grandegger If enabled, CAN bit-timing parameters will be calculated for the 3039549eefSWolfgang Grandegger bit-rate specified via Netlink argument "bitrate" when the device 3139549eefSWolfgang Grandegger get started. This works fine for the most common CAN controllers 3239549eefSWolfgang Grandegger with standard bit-rates but may fail for exotic bit-rates or CAN 3339549eefSWolfgang Grandegger source clock frequencies. Disabling saves some space, but then the 3439549eefSWolfgang Grandegger bit-timing parameters must be specified directly using the Netlink 3539549eefSWolfgang Grandegger arguments "tq", "prop_seg", "phase_seg1", "phase_seg2" and "sjw". 3639549eefSWolfgang Grandegger If unsure, say Y. 3739549eefSWolfgang Grandegger 38429da1ccSWolfgang Grandeggerconfig CAN_SJA1000 39429da1ccSWolfgang Grandegger depends on CAN_DEV 40429da1ccSWolfgang Grandegger tristate "Philips SJA1000" 41429da1ccSWolfgang Grandegger ---help--- 42429da1ccSWolfgang Grandegger Driver for the SJA1000 CAN controllers from Philips or NXP 43429da1ccSWolfgang Grandegger 44f534e52fSWolfgang Grandeggerconfig CAN_SJA1000_PLATFORM 45f534e52fSWolfgang Grandegger depends on CAN_SJA1000 46f534e52fSWolfgang Grandegger tristate "Generic Platform Bus based SJA1000 driver" 47f534e52fSWolfgang Grandegger ---help--- 48f534e52fSWolfgang Grandegger This driver adds support for the SJA1000 chips connected to 49f534e52fSWolfgang Grandegger the "platform bus" (Linux abstraction for directly to the 50f534e52fSWolfgang Grandegger processor attached devices). Which can be found on various 51f534e52fSWolfgang Grandegger boards from Phytec (http://www.phytec.de) like the PCM027, 52f534e52fSWolfgang Grandegger PCM038. 53f534e52fSWolfgang Grandegger 54d1a277c5SWolfgang Grandeggerconfig CAN_SJA1000_OF_PLATFORM 55d1a277c5SWolfgang Grandegger depends on CAN_SJA1000 && PPC_OF 56d1a277c5SWolfgang Grandegger tristate "Generic OF Platform Bus based SJA1000 driver" 57d1a277c5SWolfgang Grandegger ---help--- 58d1a277c5SWolfgang Grandegger This driver adds support for the SJA1000 chips connected to 59d1a277c5SWolfgang Grandegger the OpenFirmware "platform bus" found on embedded systems with 60d1a277c5SWolfgang Grandegger OpenFirmware bindings, e.g. if you have a PowerPC based system 61d1a277c5SWolfgang Grandegger you may want to enable this option. 62d1a277c5SWolfgang Grandegger 63a61a8423SWolfgang Grandeggerconfig CAN_EMS_PCI 64a61a8423SWolfgang Grandegger tristate "EMS CPC-PCI and CPC-PCIe Card" 65a61a8423SWolfgang Grandegger depends on PCI && CAN_SJA1000 66a61a8423SWolfgang Grandegger ---help--- 67a61a8423SWolfgang Grandegger This driver is for the one or two channel CPC-PCI and CPC-PCIe 68a61a8423SWolfgang Grandegger cards from EMS Dr. Thomas Wuensche (http://www.ems-wuensche.de). 69a61a8423SWolfgang Grandegger 703878fb6fSWolfgang Grandeggerconfig CAN_KVASER_PCI 713878fb6fSWolfgang Grandegger tristate "Kvaser PCIcanx and Kvaser PCIcan PCI Cards" 723878fb6fSWolfgang Grandegger depends on PCI && CAN_SJA1000 733878fb6fSWolfgang Grandegger ---help--- 743878fb6fSWolfgang Grandegger This driver is for the the PCIcanx and PCIcan cards (1, 2 or 753878fb6fSWolfgang Grandegger 4 channel) from Kvaser (http://www.kvaser.com). 763878fb6fSWolfgang Grandegger 77ccb29637SOliver Hartkoppconfig CAN_DEBUG_DEVICES 78ccb29637SOliver Hartkopp bool "CAN devices debugging messages" 79ccb29637SOliver Hartkopp depends on CAN 80ccb29637SOliver Hartkopp default N 81ccb29637SOliver Hartkopp ---help--- 82ccb29637SOliver Hartkopp Say Y here if you want the CAN device drivers to produce a bunch of 83ccb29637SOliver Hartkopp debug messages to the system log. Select this if you are having 84ccb29637SOliver Hartkopp a problem with CAN support and want to see more of what is going 85ccb29637SOliver Hartkopp on. 86ccb29637SOliver Hartkopp 87ccb29637SOliver Hartkoppendmenu 88