1 /* 2 * Linux ARCnet driver - COM20020 PCMCIA support 3 * 4 * Written 1994-1999 by Avery Pennarun, 5 * based on an ISA version by David Woodhouse. 6 * Derived from ibmtr_cs.c by Steve Kipisz (pcmcia-cs 3.1.4) 7 * which was derived from pcnet_cs.c by David Hinds. 8 * Some additional portions derived from skeleton.c by Donald Becker. 9 * 10 * Special thanks to Contemporary Controls, Inc. (www.ccontrols.com) 11 * for sponsoring the further development of this driver. 12 * 13 * ********************** 14 * 15 * The original copyright of skeleton.c was as follows: 16 * 17 * skeleton.c Written 1993 by Donald Becker. 18 * Copyright 1993 United States Government as represented by the 19 * Director, National Security Agency. This software may only be used 20 * and distributed according to the terms of the GNU General Public License as 21 * modified by SRC, incorporated herein by reference. 22 * 23 * ********************** 24 * Changes: 25 * Arnaldo Carvalho de Melo <acme@conectiva.com.br> - 08/08/2000 26 * - reorganize kmallocs in com20020_attach, checking all for failure 27 * and releasing the previous allocations if one fails 28 * ********************** 29 * 30 * For more details, see drivers/net/arcnet.c 31 * 32 * ********************** 33 */ 34 35 #define pr_fmt(fmt) "arcnet:" KBUILD_MODNAME ": " fmt 36 37 #include <linux/kernel.h> 38 #include <linux/ptrace.h> 39 #include <linux/slab.h> 40 #include <linux/string.h> 41 #include <linux/timer.h> 42 #include <linux/delay.h> 43 #include <linux/module.h> 44 #include <linux/netdevice.h> 45 #include <linux/io.h> 46 #include <pcmcia/cistpl.h> 47 #include <pcmcia/ds.h> 48 49 #include "arcdevice.h" 50 #include "com20020.h" 51 52 static void regdump(struct net_device *dev) 53 { 54 #ifdef DEBUG 55 int ioaddr = dev->base_addr; 56 int count; 57 58 netdev_dbg(dev, "register dump:\n"); 59 for (count = 0; count < 16; count++) { 60 if (!(count % 16)) 61 pr_cont("%04X:", ioaddr + count); 62 pr_cont(" %02X", arcnet_inb(ioaddr, count)); 63 } 64 pr_cont("\n"); 65 66 netdev_dbg(dev, "buffer0 dump:\n"); 67 /* set up the address register */ 68 count = 0; 69 arcnet_outb((count >> 8) | RDDATAflag | AUTOINCflag, 70 ioaddr, COM20020_REG_W_ADDR_HI); 71 arcnet_outb(count & 0xff, ioaddr, COM20020_REG_W_ADDR_LO); 72 73 for (count = 0; count < 256 + 32; count++) { 74 if (!(count % 16)) 75 pr_cont("%04X:", count); 76 77 /* copy the data */ 78 pr_cont(" %02X", arcnet_inb(ioaddr, COM20020_REG_RW_MEMDATA)); 79 } 80 pr_cont("\n"); 81 #endif 82 } 83 84 /*====================================================================*/ 85 86 /* Parameters that can be set with 'insmod' */ 87 88 static int node; 89 static int timeout = 3; 90 static int backplane; 91 static int clockp; 92 static int clockm; 93 94 module_param(node, int, 0); 95 module_param(timeout, int, 0); 96 module_param(backplane, int, 0); 97 module_param(clockp, int, 0); 98 module_param(clockm, int, 0); 99 100 MODULE_LICENSE("GPL"); 101 102 /*====================================================================*/ 103 104 static int com20020_config(struct pcmcia_device *link); 105 static void com20020_release(struct pcmcia_device *link); 106 107 static void com20020_detach(struct pcmcia_device *p_dev); 108 109 /*====================================================================*/ 110 111 static int com20020_probe(struct pcmcia_device *p_dev) 112 { 113 struct com20020_dev *info; 114 struct net_device *dev; 115 struct arcnet_local *lp; 116 117 dev_dbg(&p_dev->dev, "com20020_attach()\n"); 118 119 /* Create new network device */ 120 info = kzalloc(sizeof(*info), GFP_KERNEL); 121 if (!info) 122 goto fail_alloc_info; 123 124 dev = alloc_arcdev(""); 125 if (!dev) 126 goto fail_alloc_dev; 127 128 lp = netdev_priv(dev); 129 lp->timeout = timeout; 130 lp->backplane = backplane; 131 lp->clockp = clockp; 132 lp->clockm = clockm & 3; 133 lp->hw.owner = THIS_MODULE; 134 135 /* fill in our module parameters as defaults */ 136 arcnet_set_addr(dev, node); 137 138 p_dev->resource[0]->flags |= IO_DATA_PATH_WIDTH_8; 139 p_dev->resource[0]->end = 16; 140 p_dev->config_flags |= CONF_ENABLE_IRQ; 141 142 info->dev = dev; 143 p_dev->priv = info; 144 145 return com20020_config(p_dev); 146 147 fail_alloc_dev: 148 kfree(info); 149 fail_alloc_info: 150 return -ENOMEM; 151 } /* com20020_attach */ 152 153 static void com20020_detach(struct pcmcia_device *link) 154 { 155 struct com20020_dev *info = link->priv; 156 struct net_device *dev = info->dev; 157 158 dev_dbg(&link->dev, "detach...\n"); 159 160 dev_dbg(&link->dev, "com20020_detach\n"); 161 162 dev_dbg(&link->dev, "unregister...\n"); 163 164 unregister_netdev(dev); 165 166 /* this is necessary because we register our IRQ separately 167 * from card services. 168 */ 169 if (dev->irq) 170 free_irq(dev->irq, dev); 171 172 com20020_release(link); 173 174 /* Unlink device structure, free bits */ 175 dev_dbg(&link->dev, "unlinking...\n"); 176 if (link->priv) { 177 dev = info->dev; 178 if (dev) { 179 dev_dbg(&link->dev, "kfree...\n"); 180 free_arcdev(dev); 181 } 182 dev_dbg(&link->dev, "kfree2...\n"); 183 kfree(info); 184 } 185 186 } /* com20020_detach */ 187 188 static int com20020_config(struct pcmcia_device *link) 189 { 190 struct arcnet_local *lp; 191 struct com20020_dev *info; 192 struct net_device *dev; 193 int i, ret; 194 int ioaddr; 195 196 info = link->priv; 197 dev = info->dev; 198 199 dev_dbg(&link->dev, "config...\n"); 200 201 dev_dbg(&link->dev, "com20020_config\n"); 202 203 dev_dbg(&link->dev, "baseport1 is %Xh\n", 204 (unsigned int)link->resource[0]->start); 205 206 i = -ENODEV; 207 link->io_lines = 16; 208 209 if (!link->resource[0]->start) { 210 for (ioaddr = 0x100; ioaddr < 0x400; ioaddr += 0x10) { 211 link->resource[0]->start = ioaddr; 212 i = pcmcia_request_io(link); 213 if (i == 0) 214 break; 215 } 216 } else { 217 i = pcmcia_request_io(link); 218 } 219 220 if (i != 0) { 221 dev_dbg(&link->dev, "requestIO failed totally!\n"); 222 goto failed; 223 } 224 225 ioaddr = dev->base_addr = link->resource[0]->start; 226 dev_dbg(&link->dev, "got ioaddr %Xh\n", ioaddr); 227 228 dev_dbg(&link->dev, "request IRQ %d\n", 229 link->irq); 230 if (!link->irq) { 231 dev_dbg(&link->dev, "requestIRQ failed totally!\n"); 232 goto failed; 233 } 234 235 dev->irq = link->irq; 236 237 ret = pcmcia_enable_device(link); 238 if (ret) 239 goto failed; 240 241 if (com20020_check(dev)) { 242 regdump(dev); 243 goto failed; 244 } 245 246 lp = netdev_priv(dev); 247 lp->card_name = "PCMCIA COM20020"; 248 lp->card_flags = ARC_CAN_10MBIT; /* pretend all of them can 10Mbit */ 249 250 SET_NETDEV_DEV(dev, &link->dev); 251 252 i = com20020_found(dev, 0); /* calls register_netdev */ 253 254 if (i != 0) { 255 dev_notice(&link->dev, 256 "com20020_found() failed\n"); 257 goto failed; 258 } 259 260 netdev_dbg(dev, "port %#3lx, irq %d\n", 261 dev->base_addr, dev->irq); 262 return 0; 263 264 failed: 265 dev_dbg(&link->dev, "com20020_config failed...\n"); 266 com20020_release(link); 267 return -ENODEV; 268 } /* com20020_config */ 269 270 static void com20020_release(struct pcmcia_device *link) 271 { 272 dev_dbg(&link->dev, "com20020_release\n"); 273 pcmcia_disable_device(link); 274 } 275 276 static int com20020_suspend(struct pcmcia_device *link) 277 { 278 struct com20020_dev *info = link->priv; 279 struct net_device *dev = info->dev; 280 281 if (link->open) 282 netif_device_detach(dev); 283 284 return 0; 285 } 286 287 static int com20020_resume(struct pcmcia_device *link) 288 { 289 struct com20020_dev *info = link->priv; 290 struct net_device *dev = info->dev; 291 292 if (link->open) { 293 int ioaddr = dev->base_addr; 294 struct arcnet_local *lp = netdev_priv(dev); 295 296 arcnet_outb(lp->config | 0x80, ioaddr, COM20020_REG_W_CONFIG); 297 udelay(5); 298 arcnet_outb(lp->config, ioaddr, COM20020_REG_W_CONFIG); 299 } 300 301 return 0; 302 } 303 304 static const struct pcmcia_device_id com20020_ids[] = { 305 PCMCIA_DEVICE_PROD_ID12("Contemporary Control Systems, Inc.", 306 "PCM20 Arcnet Adapter", 0x59991666, 0x95dfffaf), 307 PCMCIA_DEVICE_PROD_ID12("SoHard AG", 308 "SH ARC PCMCIA", 0xf8991729, 0x69dff0c7), 309 PCMCIA_DEVICE_NULL 310 }; 311 MODULE_DEVICE_TABLE(pcmcia, com20020_ids); 312 313 static struct pcmcia_driver com20020_cs_driver = { 314 .owner = THIS_MODULE, 315 .name = "com20020_cs", 316 .probe = com20020_probe, 317 .remove = com20020_detach, 318 .id_table = com20020_ids, 319 .suspend = com20020_suspend, 320 .resume = com20020_resume, 321 }; 322 module_pcmcia_driver(com20020_cs_driver); 323