1 /* 2 * Linux ARCnet driver - "RIM I" (entirely mem-mapped) cards 3 * 4 * Written 1994-1999 by Avery Pennarun. 5 * Written 1999-2000 by Martin Mares <mj@ucw.cz>. 6 * Derived from skeleton.c by Donald Becker. 7 * 8 * Special thanks to Contemporary Controls, Inc. (www.ccontrols.com) 9 * for sponsoring the further development of this driver. 10 * 11 * ********************** 12 * 13 * The original copyright of skeleton.c was as follows: 14 * 15 * skeleton.c Written 1993 by Donald Becker. 16 * Copyright 1993 United States Government as represented by the 17 * Director, National Security Agency. This software may only be used 18 * and distributed according to the terms of the GNU General Public License as 19 * modified by SRC, incorporated herein by reference. 20 * 21 * ********************** 22 * 23 * For more details, see drivers/net/arcnet.c 24 * 25 * ********************** 26 */ 27 #include <linux/kernel.h> 28 #include <linux/module.h> 29 #include <linux/moduleparam.h> 30 #include <linux/ioport.h> 31 #include <linux/slab.h> 32 #include <linux/delay.h> 33 #include <linux/netdevice.h> 34 #include <linux/bootmem.h> 35 #include <linux/init.h> 36 #include <asm/io.h> 37 #include <linux/arcdevice.h> 38 39 40 #define VERSION "arcnet: RIM I (entirely mem-mapped) support\n" 41 42 43 /* Internal function declarations */ 44 45 static int arcrimi_probe(struct net_device *dev); 46 static int arcrimi_found(struct net_device *dev); 47 static void arcrimi_command(struct net_device *dev, int command); 48 static int arcrimi_status(struct net_device *dev); 49 static void arcrimi_setmask(struct net_device *dev, int mask); 50 static int arcrimi_reset(struct net_device *dev, int really_reset); 51 static void arcrimi_copy_to_card(struct net_device *dev, int bufnum, int offset, 52 void *buf, int count); 53 static void arcrimi_copy_from_card(struct net_device *dev, int bufnum, int offset, 54 void *buf, int count); 55 56 /* Handy defines for ARCnet specific stuff */ 57 58 /* Amount of I/O memory used by the card */ 59 #define BUFFER_SIZE (512) 60 #define MIRROR_SIZE (BUFFER_SIZE*4) 61 62 /* COM 9026 controller chip --> ARCnet register addresses */ 63 #define _INTMASK (ioaddr+0) /* writable */ 64 #define _STATUS (ioaddr+0) /* readable */ 65 #define _COMMAND (ioaddr+1) /* writable, returns random vals on read (?) */ 66 #define _RESET (ioaddr+8) /* software reset (on read) */ 67 #define _MEMDATA (ioaddr+12) /* Data port for IO-mapped memory */ 68 #define _ADDR_HI (ioaddr+15) /* Control registers for said */ 69 #define _ADDR_LO (ioaddr+14) 70 #define _CONFIG (ioaddr+2) /* Configuration register */ 71 72 #undef ASTATUS 73 #undef ACOMMAND 74 #undef AINTMASK 75 76 #define ASTATUS() readb(_STATUS) 77 #define ACOMMAND(cmd) writeb((cmd),_COMMAND) 78 #define AINTMASK(msk) writeb((msk),_INTMASK) 79 #define SETCONF() writeb(lp->config,_CONFIG) 80 81 82 /* 83 * We cannot probe for a RIM I card; one reason is I don't know how to reset 84 * them. In fact, we can't even get their node ID automatically. So, we 85 * need to be passed a specific shmem address, IRQ, and node ID. 86 */ 87 static int __init arcrimi_probe(struct net_device *dev) 88 { 89 BUGLVL(D_NORMAL) printk(VERSION); 90 BUGLVL(D_NORMAL) printk("E-mail me if you actually test the RIM I driver, please!\n"); 91 92 BUGMSG(D_NORMAL, "Given: node %02Xh, shmem %lXh, irq %d\n", 93 dev->dev_addr[0], dev->mem_start, dev->irq); 94 95 if (dev->mem_start <= 0 || dev->irq <= 0) { 96 BUGMSG(D_NORMAL, "No autoprobe for RIM I; you " 97 "must specify the shmem and irq!\n"); 98 return -ENODEV; 99 } 100 if (dev->dev_addr[0] == 0) { 101 BUGMSG(D_NORMAL, "You need to specify your card's station " 102 "ID!\n"); 103 return -ENODEV; 104 } 105 /* 106 * Grab the memory region at mem_start for MIRROR_SIZE bytes. 107 * Later in arcrimi_found() the real size will be determined 108 * and this reserve will be released and the correct size 109 * will be taken. 110 */ 111 if (!request_mem_region(dev->mem_start, MIRROR_SIZE, "arcnet (90xx)")) { 112 BUGMSG(D_NORMAL, "Card memory already allocated\n"); 113 return -ENODEV; 114 } 115 return arcrimi_found(dev); 116 } 117 118 static int check_mirror(unsigned long addr, size_t size) 119 { 120 void __iomem *p; 121 int res = -1; 122 123 if (!request_mem_region(addr, size, "arcnet (90xx)")) 124 return -1; 125 126 p = ioremap(addr, size); 127 if (p) { 128 if (readb(p) == TESTvalue) 129 res = 1; 130 else 131 res = 0; 132 iounmap(p); 133 } 134 135 release_mem_region(addr, size); 136 return res; 137 } 138 139 /* 140 * Set up the struct net_device associated with this card. Called after 141 * probing succeeds. 142 */ 143 static int __init arcrimi_found(struct net_device *dev) 144 { 145 struct arcnet_local *lp; 146 unsigned long first_mirror, last_mirror, shmem; 147 void __iomem *p; 148 int mirror_size; 149 int err; 150 151 p = ioremap(dev->mem_start, MIRROR_SIZE); 152 if (!p) { 153 release_mem_region(dev->mem_start, MIRROR_SIZE); 154 BUGMSG(D_NORMAL, "Can't ioremap\n"); 155 return -ENODEV; 156 } 157 158 /* reserve the irq */ 159 if (request_irq(dev->irq, arcnet_interrupt, 0, "arcnet (RIM I)", dev)) { 160 iounmap(p); 161 release_mem_region(dev->mem_start, MIRROR_SIZE); 162 BUGMSG(D_NORMAL, "Can't get IRQ %d!\n", dev->irq); 163 return -ENODEV; 164 } 165 166 shmem = dev->mem_start; 167 writeb(TESTvalue, p); 168 writeb(dev->dev_addr[0], p + 1); /* actually the node ID */ 169 170 /* find the real shared memory start/end points, including mirrors */ 171 172 /* guess the actual size of one "memory mirror" - the number of 173 * bytes between copies of the shared memory. On most cards, it's 174 * 2k (or there are no mirrors at all) but on some, it's 4k. 175 */ 176 mirror_size = MIRROR_SIZE; 177 if (readb(p) == TESTvalue && 178 check_mirror(shmem - MIRROR_SIZE, MIRROR_SIZE) == 0 && 179 check_mirror(shmem - 2 * MIRROR_SIZE, MIRROR_SIZE) == 1) 180 mirror_size = 2 * MIRROR_SIZE; 181 182 first_mirror = shmem - mirror_size; 183 while (check_mirror(first_mirror, mirror_size) == 1) 184 first_mirror -= mirror_size; 185 first_mirror += mirror_size; 186 187 last_mirror = shmem + mirror_size; 188 while (check_mirror(last_mirror, mirror_size) == 1) 189 last_mirror += mirror_size; 190 last_mirror -= mirror_size; 191 192 dev->mem_start = first_mirror; 193 dev->mem_end = last_mirror + MIRROR_SIZE - 1; 194 195 /* initialize the rest of the device structure. */ 196 197 lp = netdev_priv(dev); 198 lp->card_name = "RIM I"; 199 lp->hw.command = arcrimi_command; 200 lp->hw.status = arcrimi_status; 201 lp->hw.intmask = arcrimi_setmask; 202 lp->hw.reset = arcrimi_reset; 203 lp->hw.owner = THIS_MODULE; 204 lp->hw.copy_to_card = arcrimi_copy_to_card; 205 lp->hw.copy_from_card = arcrimi_copy_from_card; 206 207 /* 208 * re-reserve the memory region - arcrimi_probe() alloced this reqion 209 * but didn't know the real size. Free that region and then re-get 210 * with the correct size. There is a VERY slim chance this could 211 * fail. 212 */ 213 iounmap(p); 214 release_mem_region(shmem, MIRROR_SIZE); 215 if (!request_mem_region(dev->mem_start, 216 dev->mem_end - dev->mem_start + 1, 217 "arcnet (90xx)")) { 218 BUGMSG(D_NORMAL, "Card memory already allocated\n"); 219 goto err_free_irq; 220 } 221 222 lp->mem_start = ioremap(dev->mem_start, dev->mem_end - dev->mem_start + 1); 223 if (!lp->mem_start) { 224 BUGMSG(D_NORMAL, "Can't remap device memory!\n"); 225 goto err_release_mem; 226 } 227 228 /* get and check the station ID from offset 1 in shmem */ 229 dev->dev_addr[0] = readb(lp->mem_start + 1); 230 231 BUGMSG(D_NORMAL, "ARCnet RIM I: station %02Xh found at IRQ %d, " 232 "ShMem %lXh (%ld*%d bytes).\n", 233 dev->dev_addr[0], 234 dev->irq, dev->mem_start, 235 (dev->mem_end - dev->mem_start + 1) / mirror_size, mirror_size); 236 237 err = register_netdev(dev); 238 if (err) 239 goto err_unmap; 240 241 return 0; 242 243 err_unmap: 244 iounmap(lp->mem_start); 245 err_release_mem: 246 release_mem_region(dev->mem_start, dev->mem_end - dev->mem_start + 1); 247 err_free_irq: 248 free_irq(dev->irq, dev); 249 return -EIO; 250 } 251 252 253 /* 254 * Do a hardware reset on the card, and set up necessary registers. 255 * 256 * This should be called as little as possible, because it disrupts the 257 * token on the network (causes a RECON) and requires a significant delay. 258 * 259 * However, it does make sure the card is in a defined state. 260 */ 261 static int arcrimi_reset(struct net_device *dev, int really_reset) 262 { 263 struct arcnet_local *lp = netdev_priv(dev); 264 void __iomem *ioaddr = lp->mem_start + 0x800; 265 266 BUGMSG(D_INIT, "Resetting %s (status=%02Xh)\n", dev->name, ASTATUS()); 267 268 if (really_reset) { 269 writeb(TESTvalue, ioaddr - 0x800); /* fake reset */ 270 return 0; 271 } 272 ACOMMAND(CFLAGScmd | RESETclear); /* clear flags & end reset */ 273 ACOMMAND(CFLAGScmd | CONFIGclear); 274 275 /* enable extended (512-byte) packets */ 276 ACOMMAND(CONFIGcmd | EXTconf); 277 278 /* done! return success. */ 279 return 0; 280 } 281 282 static void arcrimi_setmask(struct net_device *dev, int mask) 283 { 284 struct arcnet_local *lp = netdev_priv(dev); 285 void __iomem *ioaddr = lp->mem_start + 0x800; 286 287 AINTMASK(mask); 288 } 289 290 static int arcrimi_status(struct net_device *dev) 291 { 292 struct arcnet_local *lp = netdev_priv(dev); 293 void __iomem *ioaddr = lp->mem_start + 0x800; 294 295 return ASTATUS(); 296 } 297 298 static void arcrimi_command(struct net_device *dev, int cmd) 299 { 300 struct arcnet_local *lp = netdev_priv(dev); 301 void __iomem *ioaddr = lp->mem_start + 0x800; 302 303 ACOMMAND(cmd); 304 } 305 306 static void arcrimi_copy_to_card(struct net_device *dev, int bufnum, int offset, 307 void *buf, int count) 308 { 309 struct arcnet_local *lp = netdev_priv(dev); 310 void __iomem *memaddr = lp->mem_start + 0x800 + bufnum * 512 + offset; 311 TIME("memcpy_toio", count, memcpy_toio(memaddr, buf, count)); 312 } 313 314 315 static void arcrimi_copy_from_card(struct net_device *dev, int bufnum, int offset, 316 void *buf, int count) 317 { 318 struct arcnet_local *lp = netdev_priv(dev); 319 void __iomem *memaddr = lp->mem_start + 0x800 + bufnum * 512 + offset; 320 TIME("memcpy_fromio", count, memcpy_fromio(buf, memaddr, count)); 321 } 322 323 static int node; 324 static int io; /* use the insmod io= irq= node= options */ 325 static int irq; 326 static char device[9]; /* use eg. device=arc1 to change name */ 327 328 module_param(node, int, 0); 329 module_param(io, int, 0); 330 module_param(irq, int, 0); 331 module_param_string(device, device, sizeof(device), 0); 332 MODULE_LICENSE("GPL"); 333 334 static struct net_device *my_dev; 335 336 static int __init arc_rimi_init(void) 337 { 338 struct net_device *dev; 339 340 dev = alloc_arcdev(device); 341 if (!dev) 342 return -ENOMEM; 343 344 if (node && node != 0xff) 345 dev->dev_addr[0] = node; 346 347 dev->mem_start = io; 348 dev->irq = irq; 349 if (dev->irq == 2) 350 dev->irq = 9; 351 352 if (arcrimi_probe(dev)) { 353 free_netdev(dev); 354 return -EIO; 355 } 356 357 my_dev = dev; 358 return 0; 359 } 360 361 static void __exit arc_rimi_exit(void) 362 { 363 struct net_device *dev = my_dev; 364 struct arcnet_local *lp = netdev_priv(dev); 365 366 unregister_netdev(dev); 367 iounmap(lp->mem_start); 368 release_mem_region(dev->mem_start, dev->mem_end - dev->mem_start + 1); 369 free_irq(dev->irq, dev); 370 free_netdev(dev); 371 } 372 373 #ifndef MODULE 374 static int __init arcrimi_setup(char *s) 375 { 376 int ints[8]; 377 s = get_options(s, 8, ints); 378 if (!ints[0]) 379 return 1; 380 switch (ints[0]) { 381 default: /* ERROR */ 382 printk("arcrimi: Too many arguments.\n"); 383 case 3: /* Node ID */ 384 node = ints[3]; 385 case 2: /* IRQ */ 386 irq = ints[2]; 387 case 1: /* IO address */ 388 io = ints[1]; 389 } 390 if (*s) 391 snprintf(device, sizeof(device), "%s", s); 392 return 1; 393 } 394 __setup("arcrimi=", arcrimi_setup); 395 #endif /* MODULE */ 396 397 module_init(arc_rimi_init) 398 module_exit(arc_rimi_exit) 399