1# 2# Arcnet configuration 3# 4 5menuconfig ARCNET 6 depends on NETDEVICES && (ISA || PCI || PCMCIA) 7 tristate "ARCnet support" 8 ---help--- 9 If you have a network card of this type, say Y and check out the 10 (arguably) beautiful poetry in 11 <file:Documentation/networking/arcnet.txt>. 12 13 You need both this driver, and the driver for the particular ARCnet 14 chipset of your card. If you don't know, then it's probably a 15 COM90xx type card, so say Y (or M) to "ARCnet COM90xx chipset 16 support" below. 17 18 To compile this driver as a module, choose M here. The module will 19 be called arcnet. 20 21if ARCNET 22 23config ARCNET_1201 24 tristate "Enable standard ARCNet packet format (RFC 1201)" 25 help 26 This allows you to use RFC1201 with your ARCnet card via the virtual 27 arc0 device. You need to say Y here to communicate with 28 industry-standard RFC1201 implementations, like the arcether.com 29 packet driver or most DOS/Windows ODI drivers. Please read the 30 ARCnet documentation in <file:Documentation/networking/arcnet.txt> 31 for more information about using arc0. 32 33config ARCNET_1051 34 tristate "Enable old ARCNet packet format (RFC 1051)" 35 ---help--- 36 This allows you to use RFC1051 with your ARCnet card via the virtual 37 arc0s device. You only need arc0s if you want to talk to ARCnet 38 software complying with the "old" standard, specifically, the DOS 39 arcnet.com packet driver, Amigas running AmiTCP, and some variants 40 of NetBSD. You do not need to say Y here to communicate with 41 industry-standard RFC1201 implementations, like the arcether.com 42 packet driver or most DOS/Windows ODI drivers. RFC1201 is included 43 automatically as the arc0 device. Please read the ARCnet 44 documentation in <file:Documentation/networking/arcnet.txt> for more 45 information about using arc0e and arc0s. 46 47config ARCNET_RAW 48 tristate "Enable raw mode packet interface" 49 help 50 ARCnet "raw mode" packet encapsulation, no soft headers. Unlikely 51 to work unless talking to a copy of the same Linux arcnet driver, 52 but perhaps marginally faster in that case. 53 54config ARCNET_CAP 55 tristate "Enable CAP mode packet interface" 56 help 57 ARCnet "cap mode" packet encapsulation. Used to get the hardware 58 acknowledge back to userspace. After the initial protocol byte every 59 packet is stuffed with an extra 4 byte "cookie" which doesn't 60 actually appear on the network. After transmit the driver will send 61 back a packet with protocol byte 0 containing the status of the 62 transmission: 63 0=no hardware acknowledge 64 1=excessive nak 65 2=transmission accepted by the receiver hardware 66 67 Received packets are also stuffed with the extra 4 bytes but it will 68 be random data. 69 70 Cap only listens to protocol 1-8. 71 72config ARCNET_COM90xx 73 tristate "ARCnet COM90xx (normal) chipset driver" 74 help 75 This is the chipset driver for the standard COM90xx cards. If you 76 have always used the old ARCnet driver without knowing what type of 77 card you had, this is probably the one for you. 78 79 To compile this driver as a module, choose M here. The module will 80 be called com90xx. 81 82config ARCNET_COM90xxIO 83 tristate "ARCnet COM90xx (IO mapped) chipset driver" 84 ---help--- 85 This is the chipset driver for the COM90xx cards, using them in 86 IO-mapped mode instead of memory-mapped mode. This is slower than 87 the normal driver. Only use it if your card doesn't support shared 88 memory. 89 90 To compile this driver as a module, choose M here. The module will 91 be called com90io. 92 93config ARCNET_RIM_I 94 tristate "ARCnet COM90xx (RIM I) chipset driver" 95 ---help--- 96 This is yet another chipset driver for the COM90xx cards, but this 97 time only using memory-mapped mode, and no IO ports at all. This 98 driver is completely untested, so if you have one of these cards, 99 please mail <dwmw2@infradead.org>, especially if it works! 100 101 To compile this driver as a module, choose M here. The module will 102 be called arc-rimi. 103 104config ARCNET_COM20020 105 tristate "ARCnet COM20020 chipset driver" 106 depends on LEDS_CLASS 107 help 108 This is the driver for the new COM20020 chipset. It supports such 109 things as promiscuous mode, so packet sniffing is possible, and 110 extra diagnostic information. 111 112 To compile this driver as a module, choose M here. The module will 113 be called com20020. 114 115config ARCNET_COM20020_ISA 116 tristate "Support for COM20020 on ISA" 117 depends on ARCNET_COM20020 && ISA 118 119config ARCNET_COM20020_PCI 120 tristate "Support for COM20020 on PCI" 121 depends on ARCNET_COM20020 && PCI 122 123config ARCNET_COM20020_CS 124 tristate "COM20020 ARCnet PCMCIA support" 125 depends on ARCNET_COM20020 && PCMCIA 126 help 127 Say Y here if you intend to attach this type of ARCnet PCMCIA card 128 to your computer. 129 130 To compile this driver as a module, choose M here: the module will be 131 called com20020_cs. If unsure, say N. 132 133endif # ARCNET 134